Search Results

Search found 11482 results on 460 pages for 'portable device'.

Page 26/460 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• bluez 5.19 PS4 controller

  - by Athanase

  I currently have a problem when pairing my computer with a PS4 remote. On my Ubuntu 14.04 I removed everything related with bluez and bluetooth, and I built and installed bluez 5.19. Here are some useful command outputs: jean@system ~ hcitool hcitool - HCI Tool ver 5.19 jean@system ~ hcitool dev Devices: hci0 00:15:83:4C:0C:BB jean@system ~ bluetoothctl [bluetooth]# version Version 5.19 jean@system ~ bluetoothctl [NEW] Controller 00:15:83:4C:0C:BB BlueZ [default] jean@system ~ lsusb Bus 003 Device 012: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) So here is what happens. When I try to hard pair the controller with the computer, by holding the share and ps button for a while, everything works as expected and the pairing is done properly. After a hard pairing if I try the pairing by pressing the ps button only, nothings happen. In order to go it, I first power up the bluetooth dongle: jean@system ~ sudo hciconfig hciX up and then I run the bluetooh deamon bluetoothd: jean@system /usr/libexec/bluetooth ~ ./bluetoothd -d -n bluetoothd[11270]: Bluetooth daemon 5.19 bluetoothd[11270]: src/main.c:parse_config() parsing main.conf bluetoothd[11270]: src/main.c:parse_config() discovto=0 bluetoothd[11270]: src/main.c:parse_config() pairto=0 bluetoothd[11270]: src/main.c:parse_config() auto_to=60 bluetoothd[11270]: src/main.c:parse_config() name=%h-%d bluetoothd[11270]: src/main.c:parse_config() class=0x000100 bluetoothd[11270]: src/main.c:parse_config() Key file does not have key 'DeviceID' bluetoothd[11270]: src/gatt.c:gatt_init() Starting GATT server bluetoothd[11270]: src/adapter.c:adapter_init() sending read version command bluetoothd[11270]: Starting SDP server bluetoothd[11270]: src/sdpd-service.c:register_device_id() Adding device id record for 0002:1d6b:0246:0513 ... bluetoothd[11270]: src/adapter.c:adapter_service_insert() /org/bluez/hci0 bluetoothd[11270]: src/adapter.c:add_uuid() sending add uuid command for index 0 bluetoothd[11270]: profiles/audio/a2dp.c:a2dp_sink_server_probe() path /org/bluez/hci0 bluetoothd[11270]: profiles/audio/a2dp.c:a2dp_source_server_probe() path /org/bluez/hci0 bluetoothd[11270]: src/adapter.c:btd_adapter_unblock_address() hci0 00:00:00:00:00:00 bluetoothd[11270]: src/adapter.c:get_ltk_info() A4:15:66:C1:0D:2A bluetoothd[11270]: src/device.c:device_create_from_storage() address A4:15:66:C1:0D:2A bluetoothd[11270]: src/device.c:device_new() address A4:15:66:C1:0D:2A bluetoothd[11270]: src/device.c:device_new() Creating device /org/bluez/hci0/dev_A4_15_66_C1_0D_2A bluetoothd[11270]: src/device.c:device_set_bonded() bluetoothd[11270]: src/adapter.c:get_ltk_info() A4:15:66:88:5E:9A bluetoothd[11270]: src/device.c:device_create_from_storage() address A4:15:66:88:5E:9A bluetoothd[11270]: src/device.c:device_new() address A4:15:66:88:5E:9A bluetoothd[11270]: src/device.c:device_new() Creating device /org/bluez/hci0/dev_A4_15_66_88_5E_9A bluetoothd[11270]: src/device.c:device_set_bonded() bluetoothd[11270]: src/adapter.c:load_link_keys() hci0 keys 2 debug_keys 0 bluetoothd[11270]: src/adapter.c:load_ltks() hci0 keys 0 bluetoothd[11270]: src/adapter.c:load_connections() sending get connections command for index 0 bluetoothd[11270]: src/adapter.c:adapter_service_insert() /org/bluez/hci0 bluetoothd[11270]: src/adapter.c:add_uuid() sending add uuid command for index 0 bluetoothd[11270]: src/adapter.c:set_did() hci0 source 2 vendor 1d6b product 246 version 513 bluetoothd[11270]: src/adapter.c:adapter_register() Adapter /org/bluez/hci0 registered bluetoothd[11270]: src/adapter.c:set_dev_class() sending set device class command for index 0 bluetoothd[11270]: src/adapter.c:set_name() sending set local name command for index 0 bluetoothd[11270]: src/adapter.c:set_mode() sending set mode command for index 0 bluetoothd[11270]: src/adapter.c:set_mode() sending set mode command for index 0 bluetoothd[11270]: src/adapter.c:adapter_start() adapter /org/bluez/hci0 has been enabled bluetoothd[11270]: src/adapter.c:trigger_passive_scanning() bluetoothd[11270]: plugins/hostname.c:property_changed() static hostname: system bluetoothd[11270]: plugins/hostname.c:property_changed() pretty hostname: bluetoothd[11270]: plugins/hostname.c:update_name() name: system bluetoothd[11270]: src/adapter.c:adapter_set_name() name: system bluetoothd[11270]: plugins/hostname.c:property_changed() chassis: desktop bluetoothd[11270]: plugins/hostname.c:update_class() major: 0x01 minor: 0x01 bluetoothd[11270]: src/adapter.c:load_link_keys_complete() link keys loaded for hci0 bluetoothd[11270]: src/adapter.c:load_ltks_complete() LTKs loaded for hci0 bluetoothd[11270]: src/adapter.c:get_connections_complete() Connection count: 0 And then I press the ps button of the PS4 controller bluetoothd[11270]: src/adapter.c:connected_callback() hci0 device A4:15:66:C1:0D:2A connected eir_len 5 bluetoothd[11270]: profiles/input/server.c:connect_event_cb() Incoming connection from A4:15:66:C1:0D:2A on PSM 17 bluetoothd[11270]: profiles/input/device.c:input_device_set_channel() idev (nil) psm 17 bluetoothd[11270]: Refusing input device connect: No such file or directory (2) bluetoothd[11270]: profiles/input/server.c:confirm_event_cb() bluetoothd[11270]: Refusing connection from A4:15:66:C1:0D:2A: unknown device bluetoothd[11270]: src/adapter.c:dev_disconnected() Device A4:15:66:C1:0D:2A disconnected, reason 3 bluetoothd[11270]: src/adapter.c:adapter_remove_connection() bluetoothd[11270]: plugins/policy.c:disconnect_cb() reason 3 bluetoothd[11270]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr A4:15:66:C1:0D:2A type 0 status 0xe bluetoothd[11270]: src/device.c:device_bonding_complete() bonding (nil) status 0x0e bluetoothd[11270]: src/device.c:device_bonding_failed() status 14 bluetoothd[11270]: src/adapter.c:resume_discovery() So I don't know what is happening here and a bit of help would be appreciated.

  Read the article

• JavaOne Session Report - Java ME SDK 3.2

  - by Janice J. Heiss

  Oracle Product Manager for Java ME SDK, Sungmoon Cho, presented a session, "Developing Java Mobile and Embedded Applications with Java ME SDK 3.2,” wherein he covered the basic new features of the Java ME Platform SDK 3.2, a state-of-the-art toolbox for developing mobile and embedded applications. The session began with a summary of the four main components of Java ME SDK. A device emulator allows developers to quickly run and test applications before commercialization. It supports CLDC/MIDP CLDC/IMP.NG and CLC/AGUI. A development environment assists writing, running debugging and deploying and enables on-device debugging. Samples provide developers with useful codes and frameworks. IDE Plugins – NetBeans and Eclipse – equip developers with CPU Profiler, Memory Monitor, Network Monitor, and Device Selector. This means that manual integration is no longer necessary. Cho then talked about the Java ME SDK’s on-device tooling architecture: * Java ME SDK provides an architecture ideal for on-device-debugging.* Device Manager plays the central role by managing different devices whether it is the emulator or a device that Oracle provides or recommends or a third party device as long as the devices have a Java Runtime that supports the protocol that is designated.* The Emulator provides an accurate emulation, since it uses the same code base used in Oracle’s Java ME runtime.* The Universal Emulator Interface (UEI) makes it easy for IDEs to detect the platform.He then focused on the Java ME SDK release highlights, which include: * Implementation and support for the new Oracle® Java Wireless Client 3.2 runtime and the Oracle® Java ME Embedded runtime. A full emulation for the runtime is provided.* Support for JSR 228, the Information Module Profile-Next Generation API (IMP-NG). This is a new profile for embedded devices. * A new Custom Device Skin Creator.* An Eclipse plugin for CLDC/MIDP.* Profiling, Network monitoring, and Memory monitoring are now integrated with the NetBeans profiling tools.* Java ME SDK Update CenterCho summarized the main features: IDE Integration (NetBeans and Eclipse) enables developers to write, run, profile, and debug their applications on their favorite IDE. CPU ProfilerThis enables developers to more quickly detect the hot spot and where CPU time is being used. They can double click the method to jump directly into the source code.Memory Monitor Developers can monitor objects and memory usage in real time.Debugger on the Emulator and DeviceDevelopers can run their applications step by step, and inspect the variables to pinpoint the problem. The debugging can take place either on the emulator or the device.Embedded Application DevelopmentIMP-NG, Device Access, Logging, and AMS API Support are now available.On-Device ToolingConnect your device to your computer, and run and debug the application right on your device.Custom Device Skin CreatorDefine your own device and test on an environment that is closest to your target device. The informative session concluded with a demo that showed more concretely how to apply the new features in Java ME SDK 3.2.

  Read the article

• "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

  - by anjanesh

  I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

  Read the article

• Device Manager in read-only remote mode when local

  - by Luke Puplett

  Hello - since configuring a Windows Web Server 2008 R2 x64 to be hardened for an internet-facing deployment I receive this: "Device Manager is running in read-only mode because you are running it on a remote computer." when entering Device Manager. I have tried reversing the changes I have made, such as: Re-adding Client for Microsoft Networks Re-enabling NetBIOS over TCP-IP Re-adding File and Printer Sharing Disabling the Windows Firewall in all profiles (public, domain, private) I get no joy. It looks like a Microsoft ballsup. I'll try and use Process Monitor to have a look. Google returns only 1 page for this error. Luke

  Read the article

• Application Interface between a PC and an embedded device

  - by sasayins

  Hi, How can I make an application interface so that a PC application can communicate to an embedded device like a POS terminal? Like for example, an embedded device like POS terminal that has an embedded linux as an OS. Then I want a PC application to communicate in that POS terminal and access its module hardware like for example its magnetic stripe reader. What implementation should I create in the device, should I use CORBA or something related in that technology so that a PC application can communicate in the POS terminal? Many thanks.

  Read the article

• set iPhone Required device capabilities

  - by chozinul

  My application is for "iPhone ONLY", But I have made a mistake in the first place by not setting the application for specific device. The current setting now is: Requirement: Compatible for iPhone, iPod touch and iPad. I would like to set it to: Requirement: Compatible for iPhone. I have go to some tutorial and forum. and nothing can solve my problem. I have also contact the apple support and this is what I got: "You are permitted to expand your device requirements only. Submitting an update to your binary to restrict your device requirements is not permitted. " is it mean that I can not set my application for iPhone only? If i can change it, what would you recommend me to do? I have change the setting of device capability inside the plist, to one of this. which one is correct, use "UIRequiredDeviceCapabilities" or "Required device capabilities"? i provide the screenshoot in here: http://img218.imageshack.us/gal.php?g=screenshot20100604atam1.png does the way I use it correct? Thanks.

  Read the article

• How to write an iphone application to control a device that exposes a telnet api

  - by MAC

  Hi! I have to write an iphone application that controls a device. This device exposes a telnet based interface. The application should ideally have user access control and customizability for each user. I was thinking of writing C++ classes that would communicate with the device using sockets. This functionality can then be exposed through web-services that can be called by the iphone application. However as i looked into it deeper, the api allows you to register for events using telnet and then you can receive notification when those events occur. That kinda put a spanner in the works for me. I for one dont know a "push" scenario can work with webservices. First off i have never programmed for the iphone so far. So i am not really sure what can be done. So i was thinking if instead of having a webserver to go through, why not have the application independently running on the iphone, directly communicating with the device using sockets. The question though is, is that possible and second i am thinking it would raise a security aspect. First we could control security as everything was going through our central server. Is there a way to handle security (in the sense who has access to the device) without having a central server. I am sorry that this seems like an unorganized post, but iam trying to brainstorm here. Looking forward to hear your opinions.

  Read the article

• "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

  - by anjanesh

  I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

  Read the article

• iPhone Safari localStorage does not persist after device reboot

  - by Tom

  Hi, I write a simple iPhone web app using HTML5's localStorage. Tests on a 2G device show the data does not persist after an iPhone reboot. This is a test code: <html> <head> <meta name="viewport" content="height=device-height, width=device-width, initial-scale=1.0, maximum-scale=1.0, user-scalable=no" /> </head> <body> <script> alert("1:" + localStorage.getItem("test")); localStorage.setItem("test", "123"); alert("2:" + localStorage.getItem("test")); </script> </body> As far as I understand the data should persist even after a device reboot. Can anyone shed some light on this behavior? Thanks! Tom.

  Read the article

• No space left on device with encrypted disk that takes all space

  - by Yosef

  I use Ubuntu 11.04. There's no space left on device. I have encrypted the disk that takes up space (maybe it's good to disable it, but I don't know how). In shell, I get this message: No space left on device I run df -I: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda1 3055616 602499 2453117 20% / none 210161 890 209271 1% /dev none 214789 8 214781 1% /dev/shm none 214789 53 214736 1% /var/run none 214789 3 214786 1% /var/lock /home/myuser/.Private 3055616 602499 2453117 20% /home/myuser df -I Edit: When I run only df: Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 48060296 45618928 0 100% / none 1538340 684 1537656 1% /dev none 1547596 808 1546788 1% /dev/shm none 1547596 104 1547492 1% /var/run none 1547596 0 1547596 0% /var/lock /home/myuser/.Private 48060296 45618928 0 100% /home/myuser Edit: I thinking about few solution but I don't know which better and how exactly to do them: to enlarge partition size (I cant install gparted - no more disk space) remove encryption of partition - I really not need that

  Read the article

• ESXi 4 failed to find boot device

  - by phil

  I had exsi 3.5 running just fine, the upgrade to 4 failed ( i thought it would so everything is backed up ). but it did boot just could not import the data store So i did a fresh install of ESXi 4. Now it says failed to find boot device. Not sure why. i have wiped the disk, the controller is a adaptec 3405, it worked fine in 3.5 and when i upgrade to 4 it did boot. Now it just hangs at loading vfat. then the failed to find boot device. Any ideas?

  Read the article

• Apple Push Notification Service - notification messages aren't sent to iphone device

  - by crazywood

  Hi all, I constructed provider code with using C# and it was able to send notification messages to iphone devices successfully. But since yesterday, it hasn't worked. Also it seems to connect APNS successfully and send notification message. Unfortunately, no notification message is received by iphone device. I controlled internet connection and device token of iphone device. What else can I do? Thanks in advance...

  Read the article

• HTML client-side portable file generation - no external resources or server calls

  - by awashburn

  I have the following situation: I have set up a series of Cron jobs on an internal company server to run various PHP scripts designed to check data integrity. Each PHP script queries a company database, formats the returned query data into an HTML file containing one or more <tables>, and then mails the HTML file to several client emails as an attachment. From my experience, most of the PHP scripts generate HTML files with only a few tables, however there are a few PHP scripts the create HTML files with around 30 tables. HTML files have been chosen as the distribution format of these scans because HTML makes it easy to view many tables at once in a browser window. I would like to add the functionality for the clients to download a table in the HTML file as a CSV file. I anticipate clients using this feature when they suspect a data integrity issue based on the table data. It would be ideal for them to be able to take the table in question, export the data out to a CSV file, and then study it further. Because need for exporting the data to CSV format is at the discretion of the client, unpredictable as to what table will be under scrutiny, and intermittently used I do not want to create CSV files for every table. Normally creating a CSV file wouldn't be too difficult, using JavaScript/jQuery to preform DOM traversal and generate the CSV file data into a string utilizing a server call or flash library to facilitate the download process; but I have one limiting constraint: The HTML file needs to be "portable." I would like the clients to be able to take their HTML file and preform analysis of the data outside the company intranet. Also it is likely these HTML files will be archived, so making the export functionality "self contained" in the HTML files is a highly desirable feature for the two previous reasons. The "portable" constraint of CSV file generation from a HTML file means: I cannot make a server call. This means ALL the file generation must be done client-side. I want the single HTML file attached to the email to contain all the resources to generate the CSV file. This means I cannot use jQuery or flash libraries to generate the file. I understand, for obvious security reasons, that writing out files to disk using JavaScript isn't supported by any browser. I don't want to create a file without the user knowledge; I would like to generate the file using JavaScript in memory and then prompt the user the "download" the file from memory. I have looked into generating the CSV file as a URI however, according to my research and testing, this approach has a few problems: URIs for files are not supported by IE (See Here) URIs in FireFox saves the file with a random file name and as a .part file As much as it pains me, I can accept the fact the IE<=v9 won't create a URI for files. I would like to create a semi-cross-browser solution in which Chrome, Firefox, and Safari create a URI to download the CSV file after JavaScript DOM traversal compiles the data. My Example Table: <table> <thead class="resulttitle"> <tr> <th style="text-align:center;" colspan="3"> NameOfTheTable</th> </tr> </thead> <tbody> <tr class="resultheader"> <td>VEN_PK</td> <td>VEN_CompanyName</td> <td>VEN_Order</td> </tr> <tr> <td class='resultfield'>1</td> <td class='resultfield'>Brander Ranch</td> <td class='resultfield'>Beef</td> </tr> <tr> <td class='resultfield'>2</td> <td class='resultfield'>Super Tree Produce</td> <td class='resultfield'>Apples</td> </tr> <tr> <td class='resultfield'>3</td> <td class='resultfield'>John's Distilery</td> <td class='resultfield'>Beer</td> </tr> </tbody> <tfoot> <tr> <td colspan="3" style="text-align:right;"> <button onclick="doSomething(this);">Export to CSV File</button></td> </tr> </tfoot> </table> My Example JavaScript: <script type="text/javascript"> function doSomething(inButton) { /* locate elements */ var table = inButton.parentNode.parentNode.parentNode.parentNode; var name = table.rows[0].cells[0].textContent; var tbody = table.tBodies[0]; /* create CSV String through DOM traversal */ var rows = tbody.rows; var csvStr = ""; for (var i=0; i < rows.length; i++) { for (var j=0; j < rows[i].cells.length; j++) { csvStr += rows[i].cells[j].textContent +","; } csvStr += "\n"; } /* temporary proof DOM traversal was successful */ alert("Table Name:\t" + name + "\nCSV String:\n" + csvStr); /* Create URI Here! * (code I am missing) */ /* Approach 1 : Auto-download * downloads CSV data but: * In FireFox downloads as randomCharacers.part instead of name.csv * In Chrome downloads without prompting the user * In Safari opens the files in browser (textfile) */ //var hrefData = "data:text/csv;charset=US-ASCII," + encodeURIComponent(csvStr); //document.location.href = hrefData; /* Approach 2 : Right-Click Save As... */ var hrefData = "data:text/csv;charset=US-ASCII," + encodeURIComponent(csvStr); var fileLink = document.createElement("a"); fileLink.href = hrefData; fileLink.innerHTML = "download"; parentTD = inButton.parentNode; parentTD.appendChild(fileLink); parentTD.removeChild(inButton); } </script> I am looking for an example solution in which the above example table can be downloaded as a CSV file: using a URI the user is prompted to save the file the default filename is the name of the table. code works as described in modern versions of FireFox, Safari, & Chrome I have added a <script> tag with the DOM traversal function doSomething(). The real help I need is with formatting the URI to what I want within the doSomething() function.

  Read the article

• No audio input deviced are installed

  - by Meowbits

  If I go to Sound Recording Devices and it says "No audio devices are installed" If I click to set up a microphone I get an error "Wizard could not launch, No audio input device found, make sure your audio hardware is working properly and check your audio configuration in the Audio Devices and Sound Themes control panel. Where can I get an audio input device? I just want something so I can actually use the microphone on my headset. This is ridiculous. I have tried to look for any file but I simply cannot find a way to add an audio input device... I really do not want to format my computer just for this problem but I am starting to feel like that is the only option I have. I have the latest chipsets

  Read the article

• USB Audio device not selectable in settings after Camtasia Studio

  - by DJDavid98

  I tried to use Camtasia Studio 7 Recorder today, and when I selected the "Record Microphone and System audio" option, the recorder crashed, and then my sound settings icon disappeared. If I tried to open the Camtasia Recorder's Options or tried to select the option again, the program crashed. After holding the power button to force restart (so My settings wouldn't save, theoretically) the audio device was still not showing up in the sound settings, although it still is displayed under the "Hardware" tab, and is Functional. Or at least that's what windows thinks. I tried uninstalling Camtasia, and no sucess either. The USB audio device is labeled "C-Media USB Headphone Set". OS: Windows XP SP3 hu-HU Is there any way I could make it work again, like registry editing or something?

  Read the article

• DDMS Not Showing Threads From Device

  - by polyclef

  I'd like to check for memory leaks in my Android app using the DDMS feature in Eclipse. When I launch an emulated device, the threads display properly for the emulated device, starting with 8600 and up. However, when I connect my Droid to the PC, the device shows up just fine in DDMS. The logcat is generated correctly, and I can view the file structure. However, threads do not display. I get "no client selected" in the Threads pane, and there is no drop-down icon next to the device listing. Do I need to change some particular setting in Eclipse? Is this maybe a driver issue?

  Read the article

• How to determine the used size of device associated's buffer

  - by dubbaluga

  Hi, when mounting a device without the "sync" option, e. g. by invoking the following: mount -o async /dev/sdc1 /mnt a buffer is associated with a device to optimize (speed) read/write operations. Is there a way to determine the size of this buffer? Another question that comes into my mind is, if it's possible to find out how much of it is used currently. This can be interesting to determine the time it would take to "sync" or "umount" slow devices, such as flash-based media. Thanks in advance for your answers, Rainer

  Read the article

• How to know a device's name from its device ID in OS X?

  - by yangumi

  Hi all, I'm writing a program in OS X that receives click events from a mouse and a touchpad. When the user clicks at somewhere, the OS sends the device ID, which is just an int, and the position of the cursor to my callback function. I want to know if the click event comes from mouse or touchpad. So, how can I know the device's name from its device ID? Thank you! (I'm sorry for my poor English.)

  Read the article

• Cooperative linux vs vm

  - by Rhythmic Algorithm

  What are the advantages / disadvantages of using cooperative linux like portable ubuntu for example compared to a qemu or any other virtual machine installation. Is one option notably faster than the other plus and other things that should be taken into consideration.

  Read the article

• Windows Home Server backup recovery missing driver for USB Device

  - by Pat James

  I'm doing a backup recovery of a Windows 7 PC from the backup on Windows Home Server. I've done this before and am accustomed to the prompt to load drivers for devices such as the NIC from a USB flash drive, which I have all loaded up with the drivers from the special folder in the WHS backup repository for this PC. My problem on this PC is that one of the drivers the recovery CD complains is missing is "USB Device", and it fails to find the drivers when I click the button to scan for and install drivers. So it seems it can't access the USB flash drive to load the other drivers. Any suggestions? I think my next step is to pull a DVD drive from another system and plug it in with a CD burned with the device drivers.

  Read the article

• How do I autorun applications after mounting a TrueCrypt container?

  - by NoCatharsis

  I would like my TrueCrypt virtual drive to act as a newly inserted USB drive or CD/DVD by executing commands in the partition's autorun.inf file. I've read several suggestions online including creating a .bat file or installing software so Windows will think this is a CD, but I'd like to know the easiest and least intrusive way to pull it off. i.e. I want to keep from installing or messing with the host computer as much as possible, as this is intended to be a fully portable drive.

  Read the article

• Syncing contacts to iOS device with Exchange

  - by flackend

  I set up a Microsoft Exchange account on my iOS device to sync my Gmail contacts. But Microsoft Exchange is ignoring phone numbers that are labeled as 'iPhone' or 'main'. For example, John Smith: On Mac and Gmail: John Smith main: 123-334-1212 home: 123-330-1002 work: 123-330-8211 iPhone: 123-778-5556 On iOS device (via Exchange sync): John Smith home: 123-330-1002 work: 123-330-8211 I'd like to sync my contacts from my Mac to iCloud and Gmail, but you can't do both: Is there a solution to sync iOS and Gmail contacts without using Exchange? Thanks for any help!

  Read the article

• BT socket Device over Structured Cabling

  - by TheD

  Not sure if this is the right stack* site to post on but I believe cabling is a just subject. Essentially I have a Credit Card machine which is connected to a phone line via standard BT Socket. So basically, the port of the wall has a balun plugged in which takes the RJ45 outlet on the wall to BT, so I can plug the device in. This works fine, however I need the machine to be on the other side of the room so want to route it through my patch panel (strucutered cabling). How can this be done? So Device -- ? -- RJ45 port -- Patch Panel -- ? -- Balun out wall outlet Where ? is to be filled in ! :)

  Read the article

• -sizeWithFont Functions Differently on Device

  - by LucasTizma

  So I am seemingly encountering some strange behavior when using NSString's -sizeWithFont family of method calls depending on whether or not I'm invoking it on the iPhone Simulator or an actual device. Simply enough, when the receiver of the -sizeWithFont method call is nil, the resulting CGSize passed back on the Simulator is {0, 0}. However, on the device, it is the size of the bounding rectangle I specified in the method call. See the following log statements: Simulator: someString: (null) someStringSize: {0, 0} Device: someString: (null) someStringSize: {185, 3.40282e+38} The behavior on the Simulator is what I would expect. Not that this issue is difficult to circumvent, but 1) I'm a little confused why this family of functions would behave differently on the Simulator and an actual device, and 2) why does calling a method on a nil receiving return a particular result? Thanks for any pointers or insight you guys can provide! EDIT: I suppose I should mention that I'm building against the 3.1 SDK.

  Read the article

• Android Failed to install HelloWorld.apk on device (null) Error

  - by Nagaraj

  Hai Every Body............ I am New to Android. When i am running the android application in eclipse i am getting this messages in console. Please help me how to solve this problem. to my mail:[email protected] [2011-03-08 12:57:35 - HelloWorld] ------------------------------ [2011-03-08 12:57:35 - HelloWorld] Android Launch! [2011-03-08 12:57:35 - HelloWorld] adb is running normally. [2011-03-08 12:57:35 - HelloWorld] Performing com.oreilly.helloworld.HelloWorldActivity activity launch [2011-03-08 12:57:35 - HelloWorld] Automatic Target Mode: Preferred AVD 'MY_AVD' is not available. Launching new emulator. [2011-03-08 12:57:35 - HelloWorld] Launching a new emulator with Virtual Device 'MY_AVD' [2011-03-08 12:57:39 - HelloWorld] New emulator found: emulator-5554 [2011-03-08 12:57:39 - HelloWorld] Waiting for HOME ('android.process.acore') to be launched... [2011-03-08 13:00:14 - HelloWorld] WARNING: Application does not specify an API level requirement! [2011-03-08 13:00:14 - HelloWorld] Device API version is 11 (Android 3.0) [2011-03-08 13:00:14 - HelloWorld] HOME is up on device 'emulator-5554' [2011-03-08 13:00:14 - HelloWorld] Uploading HelloWorld.apk onto device 'emulator-5554' [2011-03-08 13:00:14 - HelloWorld] Installing HelloWorld.apk... [2011-03-08 13:02:22 - HelloWorld] Failed to install HelloWorld.apk on device 'emulator-5554! [2011-03-08 13:02:22 - HelloWorld] (null) [2011-03-08 13:02:23 - HelloWorld] Launch canceled!

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >