Search Results

Search found 13145 results on 526 pages for 'print drivers'.

Page 26/526 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Broadcom 4365 wireless driver with 3.4 / 3.5 kernel

  - by zaid

  I used this package to install the driver on 3.2 Kernel and it was working perfectly. Unfortunately the system used to freeze randomly with 3.2 kernel so I installed 3.4 kernel, now there is no freezing, the only problem is that my wifi card is not working, I tried to re-install the package, but didn't work. I can see the driver in the "additional drivers" and it say that it is active, but when I execute iwconfig it doesn't show up. I've even tried ndiswraper and that didn't work either. my lspci: 01:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01)

  Read the article

• I removed nvidia driver and lshw -c video still shows nvidia

  - by sinekonata

  Today I tried to activate the newer experimental drivers and both 304 and 310 failed to even install. So I tried the regular nvidia driver 295.40 for the 20th time today (I had lag issues and was testing Nouveau vs Nvidia with dual monitor and Unity2D-3D) Within my tty1 I tried to remove nvidia: sudo apt-get remove nvidia-settings nvidia-current and purge too reboot, nothing. So when lshw -c video displayed nvidia as my driver I tried sudo rm /etc/X11/xorg.conf since I read ubuntu would "reset" the GUI conf but reboot, nothing. So next I tried sudo jockey-text --disable=xorg:nvidia_current And nothing has worked...

  Read the article

• terminal won't show in failsafex

  - by Samir Desai

  so after recently reinstalling some drivers I came across the issue detailed in this post How to fix "The system is running in low-graphics mode" error? I run 12.04 on my HP laptop with an Nvidia card. I went to GRUB and loaded failsafex to have the exact same problem described in the response up there, I then attempted to load the terminal, however when I do try and load the terminal I just get a blank screen and nothing else, is there any other easier way to access the terminal. I am quite new to Ubuntu.

  Read the article

• How to install Radeon Open Source Driver?

  - by Clintonio

  I have an MSI Radeon HD 7850 card. MSI provide no Linux support, and the AMD driver gives me an Unsupported Hardware watermark that does not show up in screenshots. I uninstalled the proprietary driver and found that Unity 3D no longer works, and I really only picked Ubuntu because of the excellent shortcuts provided in the recent versions. Trying to locate the open source driver has been a pain for me. According to the documentation I have read it is pre-included in Ubuntu 12.04, yet there is no Unity 3D support. I tried using the newest drivers from AMD's website, but that also had the watermark. Does anyone know how I can get the open source driver? If not, does anyone know how to remove the watermark. I'm on the verge of going back to Windows.

  Read the article

• How do I get a Qualcomm Atheros Killer E2200 gigabit ethernet card working on a MSI Z87-GD65?

  - by Travis Allen

  So I literally just built my first computer from scratch and I can't get the network card to work as I've gathered it requires getting some drivers somehow.. Motherboard : MSI Z87-GD65 CPU : Intel Haswell i7 Ubuntu Ver : 12.04 Using the on-board network port Please help I'm about to start crying into my keyboard over this (not really). Any info would be greatly appreciated, also please be very specific as to what I have to do as I have not used Ubuntu very much so talk to me like a child, I won't take offence. Also I've already tried following the instructions here : How do I get a Qualcomm Atheros Killer E2200 gigabit ethernet card working? I don't know if I'm just retarded or am missing something

  Read the article

• Printing takes forever and gives pixelated prints

  - by kelvinsong

  I have a Brother HL-3070CW printer, which has some serious issues. Printing takes an abnormally long time, and if the file has anything more than text in it, it becomes horribly aliased and pixelated. The printer also sometimes complains about running out of memory. This problem has appeared on and off throughout various Ubuntu releases, and can sometimes be worked around by saving a file in Postscript through Evince, and printing the PS file in Evince. I tried to install drivers from the Brother website, but it gives an error "dependency not satisfiable: hl3070cwlpr" Help, I'm wasting a huge amount of paper and ink(not to mention time) reprinting pages over and over again in trial and error.

  Read the article

• wireless driver error after install

  - by James

  after following this command to update wifi drivers:1- Boot into Ubuntu 2- Open a terminal by pressing Ctrl+Alt+T 3- Type in the following (verbatim!) sudo apt-get update && sudo apt-get upgrade press Enter, the command will prompt for your password (the one you use to login into Ubuntu), type it and press Enter. Wait for it to finish updating your system. Now type: sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer Wait for the command to finish installing the driver, when done restart your computer. i get a message after the first command when installing has done saying not enough space so it aborts! what do i do to fix this

  Read the article

• ubuntu 12.04 nvidia breaks resolution

  - by Terje Kristiansen

  i am running ubuntu 12.04 64-bit and i have a nvidia Geforce GT 650m, it was running fine with 1920 x 1024, except a lot of tearing everytime i ran videos. I thought activating the nvidia driver maybe would fix this. When entering "nvidia X server setting" it says " you do not appear to be using nvidia X driver. Please edit your X configuration file ( just run "nvidia-xconfig" as root), and restart the X server. I did and then the computer reboots with a resolutioin of 640 x 480. How can i restore the previous settings, or preferably get it to show full resolution without tearing ? When i enter "nvidia X Server Settings" now it still says the same as above, " do not appear to be using nvidia X driver" when i go to "system settings, additional drivers" it says nvidia_current -- "This driver is activated but not currently in use" astr0

  Read the article

• Wifi networks will not show up!

  - by Kcahmadi

  I'm running Ubuntu 14.04 on an old '08 macbook. I've gone to system settingsSoftware & UpdatesAdditional Drivers and enabled the wireless driver. But when I click the wifi icon on the top toolbar no networks show up. When running lshw it clearly shows my wireless card under Network controller and it says the driver is installed. However, nm-tool only shows ethernet. And rfkill only shows bluetooth. What can I do?

  Read the article

• Inspiron 5720 unclaimed hardware

  - by Chelios

  I have two unclaimed devices in my Dell Inspiron 5720: *-display UNCLAIMED description: 3D controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress cap_list configuration: latency=0 resources: memory:f0000000-f0ffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:3000(size=128) *-serial UNCLAIMED description: SMBus product: 7 Series/C210 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:f1614000-f16140ff ioport:efa0(size=32) What are these devices and what drivers do I need for them? Thanks!

  Read the article

• Energy saving with two batteries (Gigabyte S1080 and similar)

  - by user37155

  my today question is: how do I manage a tablet (Gigabyte 1080) with an additional battery in Ubuntu ? The control bar shows two separate batteries but starts to suck all the energy from the secundary battery, not leaving any power in it and ruining it (if I don't remove it earlier), and then starts with the primary battery. Here you find a description of the secundary battery: http://www.gigabyte.com/products/product-page.aspx?pid=3837#kf Do you have some solutions for a more confortable use of te device, with windows-like drivers maybe ? Is there a graphical tool to manage two batteries in Linux, in order not to ruin them, and possibly to save energy with them ? Many thanks and greetings, Francesco

  Read the article

• Broadcom 4365 wireless driver on 12.04 with 3.4 / 3.5 kernel

  - by zaid

  I used this package to install the driver on 3.2 Kernel and it was working perfectly. Unfortunately the system used to freeze randomly with 3.2 kernel so I installed 3.4 kernel, now there is no freezing, the only problem is that my wifi card is not working, I tried to re-install the package, but didn't work. I can see the driver in the "additional drivers" and it say that it is active, but when I execute iwconfig it doesn't show up. I've even tried ndiswraper and that didn't work either. my lspci: 01:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01)

  Read the article

• 13.04 - Extenal monitor plugged on laptop HDMI shows image but lags a lot

  - by Thiago Fassina

  It uses an Nvidia GeForce GTS 250M. When I plug in the monitor, it shows some images but with bad FPS and lagging a lot. For example, when I move the mouse pointer, it leaves a trail that vanishes from time to time. I didn't install Nvidia drivers because every time I did this on past versions I ended up with an unbootable system. On past versions I just gave up trying to use the monitor cause it never showed anything regardless of what driver I installed. But since 13.04 ALMOST made it, I'll make another tries. ps.: Works perfectlty on Windows 7/8

  Read the article

• Nvidia Driver versions?

  - by Patrick Krenz

  I've looked all over and can't find any reason as to why or how Nvidia names their drivers. for example they have a 330.xxx/340.xxx series that are current but also a 300.xxx and i've found that they aren't always release in order by number. Here's an example on there site with version and release date 331.38 - January 13 334.16 - Feb 7 331.49 - Feb 18 I'm really confused about what driver to actually go with, a few different series versions seem to work adequately and I just want to have an understanding of it and what the best option to work from would be. I really appreciate any information

  Read the article

• How do I get my RTL8192ce based wireless device working properly?

  - by JonnyTruelove

  I am using the rtl8192cu chipset (on a Belkin wireless USB adapter N300) combined with 64 bit architecture and the 3.8 kernel. Some of you may know that this doesn't work. I tried this fix - RTL8188CU USB Network Adaptor on ubuntu 13.04 and now my internet is super slow. I am totally new to Ubuntu and I am concerned I do not have the right driver. The "stock" driver was the RTL8192cu, but it didn't connect 99% of the time and if it did the upload speed was higher than the download. Right now I am connecting through my laptop with a crossover cable, so my internet connection is just fine in my apartment. Relevant output from lsusb is here: Bus 002 Device 002: ID 050d:2103 Belkin Components F7D2102 802.11n N300 Micro Wireless Adapter v3000 [Realtek RTL8192CU] (bonus question: is that [050d:2103] the actual physical address straight from the hardware? Or does it change when I put different drivers on it? I am concerned I do not have the right driver)

  Read the article

• fglrx installation without success - gl_conf issue

  - by Lucio

  I followed the steps of this guide. I've installed the drivers without any problems with sudo dpkg -i fglrx*.deb. The next step is Generate a new /etc/X11/xorg.conf file, but I can't do this due to the following reason: When I enter sudo aticonfig --initial -f the terminal show me this output: sudo: aticonfig: command not found This problem is caused by an error with the symbolics links into the fglrx directory. Look at this section, where you can see -how to fix it- but it doesn't work for me. Why it doesn't? Because after I enter sudo update-alternatives --auto gl_conf the terminal show me this: update-alternatives: error: no alternatives for gl_conf. What I have to do to fix this problem? GC: ATI RadeonHD 6670

  Read the article

• 12.10 starts up to just my desktop background [closed]

  - by Alex

  Possible Duplicate: Unity does not start after installing the fglrx drivers on 12.10 I have only just started using linux more than just instlling it on an old pc for fun and have just changed the driver settings from the default option. The computer starts up and goes through everything else well, but at slightly lower resolution. Once signing on to Ubuntu, it only displays my desktop background and cursor. Can i restore it to the default driver settings? I've spent a while transferring files and don't want to reinstall Ubuntu.

  Read the article

• Failed to install the proprietary display driver, Compiz crashed!

  - by Naveen

  ATI Mobility Radeon HD 5400 I was using the default open source driver with Gnome classic, but when I upgraded to the closed sourced one using jockey-gtk/additional drivers everything messed up! It failed to activate the driver. Here is the error log. Wobbly windows or any other compiz effect won't work now. I can't even move a window! I'm on Precise Pangolin, Kernel-3.2.0-31-generic-pae Please Help! :( Update: I think my driver is installed even jockey doesn't show it. Compiz effects are working in Unity desktop... but I want it on Gnome Classic.

  Read the article

• How to install Radeon Open Source Driver in Ubuntu 12.04

  - by Clintonio

  I have an MSI Radeon HD 7850 card. MSI provide no Linux support, and the AMD driver gives me an Unsupported Hardware watermark that does not show up in screenshots. I uninstalled the proprietary driver and found that Unity 3D no longer works, and I really only picked Ubuntu because of the excellent shortcuts provided in the recent versions. Trying to locate the open source driver has been a pain for me. According to the documentation I have read it is pre-included in Ubuntu 12.04, yet there is no Unity 3D support. I tried using the newest drivers from AMD's website, but that also had the watermark. Does anyone know how I can get the open source driver? If not, does anyone know how to remove the watermark. I'm on the verge of going back to Windows.

  Read the article

• No sound card detected [elementary os]

  - by Silouane Gerin

  h61 I set up a computer for my parents with elementary os. I installed an Asus P8H61-I motherboard which contains an integrated Realtek ALC887 sound card. The system doesn't recognize the sound card. Here are the results of some commands: lspci | grep audio doesn't return anything, alsa force-reload return Unloading ALSA sound driver modules: (none loaded). Loading ALSA sound driver modules: (none to reload). aplay -l no soundcard detected and cat /proc/asound/cards let me know that asound doesn't exist. I tried installing Realtek drivers but nothing happened. Here is a log from alsa : Log Can someone help me? Thanks.

  Read the article

• Are Intel HD 4000 graphics supported on Ubuntu 10.04 LTS?

  - by user1118764

  I have an intel Core i7-3700 system with Intel HD 4000 integrated graphics with a dual monitor setup (1 connected via VGA, the other via DVI) on Ubuntu 10.04 LTS 64bit. I'm trying to get my monitors correctly detected. Right now, in only 1 unknown monitor is detected with a max resolution of 1280x1024, which is lower than my main monitor connected to DVI. Also, the desktop is mirrored rather than extended. I've previously managed to get a Core i5-2400 system with Intel HD 3000 integrated graphics with the same dual monitor setup and Ubuntu 10.04 LTS 64bit to work using the glasen ppa drivers, but this time, after installing them following the instructions How do I install the Intel HD 3000 video driver? but it doesn't seem to work. Does the Intel HD 4000 require a different driver from the 3000? If so, where can I get it?

  Read the article

• Suddenly today, no HDMI on both Ubuntu 12.04 and Windows 7. What is HDA driver?

  - by Mike

  In the past, I just plug in hdmi, then boot laptop, and I have display on tv. Today my tv reads as "No Signal". When I go into "sound" on dashboard, there is No HDMI option. I don't understand what could have changed in the past few days. I also have Windows 7 on this machine, and I have same issue on there as well. In Ubuntu I scanned for drivers, and it asked if I wanted to activate HDA driver for DKMS. I'm not sure what that is. I googled and it looks like an audio driver. In Windows, Its says driver is up to date.

  Read the article

• Installed Ubuntu 14.04. How do I get it working with my new AMD R9 280X. When I run it I get garbage on the display

  - by user289455

  I installed Ubuntu 14.04 on my Gigabyte A88X FM2+ motherboard and A10 7700K processor. Everything worked perfectly. This system is dual booted with Windows 8.1 for gaming and I installed subsequently I installed an AMD r9 280X gpu. Windows was easy. It kept working with the new card installed and I just needed to download and instal the driver. Reboot and it's done. Ubuntu boots into a blank display. I enter the password and can log in. The menu on the left and bar at the top are visible but when I try to open an app, I get blocks and rubbish on the display. My preference is not to remove the card. So, my question is: What would be the procedure I could follow where I can log in using a text based terminal and download and install the AMD drivers.

  Read the article

• Screen sometimes inverts after locking

  - by hackedd

  Sometimes, when I wake up my computer from a screen lock, one of my screens is inverted. It does not always happen (maybe one in ten times) and it is not always the same screen. Re-locking and unlocking the screen a couple of times fixes the colors again. I have a dual monitor setup on an ATI Radeon HD 3450, using two HP screens connected over DVI. I am using the radeon driver, and according to jockey there are no additional drivers available for my system. Any ideas as to why this happens?

  Read the article

• Upgrade to Ubuntu 13.10 disabled track pad, brightness, sound on Lenovo Z570

  - by Vizir

  I just upgraded to Ubuntu 13.10 using Ubuntu's software update. It seemed to go all right, however after the system restarted and booted up Ubuntu 13.10, it began experiencing several problems. Some of them were due to expected conflicts with the updated OS, however right now I cannot figure out why certain hardware functions are now "broken" and how to fix them. As far as I can tell, these are the sound (permanently muted), mic (picks up no sound), brightness (set at maximum brightness regardless of using keyboard shortcuts or moving the screen brightness slider) and trackpad (mouse does not move, however plugged-in USB mouse does) This sounds to me like a driver issue, however I cannot figure out how to re-enable my drivers, re-install them, or whatever I have to do here. This did not happen durring my upgrades from 12.04 to 12.10, or 12.10 to 13.04, so I'm at a total loss as to why this happened this time around. My computer is a Lenovo Z570, dual-booting Ubuntu and Windows 7 from GRUB 2. Windows is working fine as far as I can tell.

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >