Search Results

Search found 6612 results on 265 pages for 'seconds'.

Page 26/265 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• My computer freezes irregularly

  - by Manhim

  My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

  Read the article

• Poor WAMP performance when using SMB/UNC Paths

  - by Brad

  I've configured a WAMP (Windows Apache MySQL and PHP) stack when when configured to use local storage takes 3-4 seconds to load. When I use an SMB/UNC share it takes 12-15 seconds to load. Here are the two lines in my httpd.conf: #DocumentRoot "//10.99.108.11/test_htdocs" #<Directory "//10.99.108.11/test_htdocs"> #DocumentRoot "C:/www" #<Directory "C:/www"> Is there performance tuning I can do on windows server 2008 R2 to improve performance or is there another way to improve performance using smb

  Read the article

• Is VirtualBox really slow compared to the host OS? (for Ruby development)

  - by dan

  I have VirtualBox running Ubuntu as a guest environment on my Macbook Pro running Leopard OS X 10.5. I timed the same batch of Ruby on Rails unit tests on both systems. The difference seems to be quite big. The same suite of Ruby unit tests that take 13.4 seconds in the native OS X, take 82 seconds to run in VirtualBox Ubuntu. Are other people doing the same kind of development noticing the same differences?

  Read the article

• DIG command is hanging and not timing out as expected

  - by igalvez

  I ran into the following issue by accident when playing around with the DIG command and testing some domain names. Why does DIG hang and not timeout after 10 seconds when executing the following: dig +tries=1 +tries=1 +retry=1 +time=5 +trace google.us.com DIG hangs for about 30 seconds instead of timing out and then dies with the following error message: dig: couldn't get address for 'ns.reserved-domain.uk.com': no more Do I need to set another flag/option for DIG to have it timeout instead of hanging, or is this a bug? DIG version: DiG 9.9.5-3-Ubuntu

  Read the article

• Handbrake --stop-at parameter not working as intended

  - by KG

  Hey all, I run the following from command line: handbrakeCLI.exe -i SourceFile.mkv -o OutputFile.mkv --stop-at 120 According to the CLIGuide you can supply the --stop-at value as seconds (which is what I want, stop encoding 120 seconds into the file). My purpose for this is to quickly create a very high quality video clip from a full movie for testing other encoding processes. However, when I view my output file it is the entire movie. Any ideas?

  Read the article

• Some apps very slow to load on Windows 7, copy & paste very slow.

  - by Mike

  Hello, I searched here and couldn't find a similar issue to mine but apologies if I missed it. I've searched the web and no one else seems to be having the same issue either. I'm running Windows 7 Ultimate 64bit on a pretty high spec. machine (well, apart from the graphics): Asus M4A79T Deluxe AMD Phenom II 965 black edition (quad core, 3.4GHz) 8GB Crucial Ballistix DDR 1333MHz RAM 80GB Intex X25 SSD for OS 500GB mechanical drive for data. ATi Radeon HD 4600 series PCI-e Be Quiet! 850W PSU I think those are all the relevant stats, if you need anything else let me know. I've updated chipset, graphics and various other drivers all to no avail, the problem remains. I have also unplugged and replugged every connection internally and cleaned the RAM edge connectors. The problems: Video LAN (VLC) and CDBurnerXP both take ages to load, I'm talking 30 seconds and 1 minute respectively which is really not right. Copy and paste from Open Office spread sheet into Fire Fox, for example, is really, really slow, I'll have pressed control V 5 or 6 times before it actually happens, if I copy and then wait 5 to 10 seconds or so it'll paste first time so it's definitely some sort of time lag. Command and Conquer - Generals: Zero Hour. When playing it'll run perfectly for about 10 or 20 seconds then it'll just pause for 3 or 4 then run for another 10 or 20 seconds and pause again and so on. I had the Task Manager open on my 2nd monitor whilst playing once and I noticed it was using about 25% of the CPU, pretty stable but when the pause came another task didn't shoot up to 100% like others on the web have been reporting (similar but not the same as my issue, often svchost.exe for them) but dropped to 2 or 3% usage then back up to 25% when it started playing properly again. Very odd! But it gets even odder... I had a BSOD and reboot last week, when it rebooted the problem had completely gone, I could play C&C to my heart's content and both the other apps loaded instantly, copy and paste worked instantly too. I did an AVG update earlier this week which required a reboot, rebooted and the problem's back. I don't think it's AVG related though, I think it was just coincidence that's the app that required a reboot. I think any reboot would have brought the issue back. A number of reboots later and it hasn't gone away again. If any one could make any suggestions as to the likely cause and solution to these issues I'd be most grateful, it's driving me nuts! Thanks, Mike....

  Read the article

• usb mouse connecting and disconnecting randomly and often

  - by Kalec

  Yes, I know this question has been asked here before but I can't add to the discussion over there and it did not help me, so here goes nothing. I've bought an acer aspire 5742G about 2 months ago or so and it's been running great, but sometimes I used to hear the windows error beep but I had no idea what was causing it since the "bug" was automatically fixed so fast I couldn't even see an error message (also it kinda always happened when I was busy also, either in a game or while doing my homework). Later on my mouse would simply not work for 3-5 seconds then work again, I thought nothing of it at the time. I also had a problem where it only worked in one usb and one only ... to move it I had to remove the battery, unplug the laptop and hold the power button for 2 minutes to reset the bios settings. Since today though it went nuts ... sometimes it disconnects / reconnects 12 times in 10 seconds and windows just keeps beeping till I unplug it, then it runs smooth for 5-6 minutes then it goes nuts again. Other times it seems like it skips (disconnects for a fraction of a second) other times just for 2-3 seconds. But this is incredibly frustrating. Sometimes the power just goes down (the laser turns off) and well that at least I would understand but this is a rare occurance. Now I know the usb ports work since I have a lot of other devices connected and I tried the mouse on a room m8's laptop so the mouse also works. My only conclusion is that it's an operating system / settings bug and / or problem (I have tried the mouse in all ports by the way). All drivers and bios are up to date (maybe except mouse but i can't seem to update that and the mouse has no name, just a serial number which helps with nothing. Still it worked till today and nothing should have changed any way). I have made sure windows can't shut it down to save power (in device management). Also I tried to delete the drivers and re-install them, rebooting and the power button trick but nothing ... most I have done is get rid of the 12 discconnects / reconnects every 10 seconds :) but that's all :( I would buy a new one but I'm afraid it might do the same thing :| ****EDIT****** Tried the mouse again at a friend but now it didn't even install it's software nor did the update work ... think I'll just buy a new one but I'd still like a suggestion at least so I'll leave this open

  Read the article

• USB mouse connecting and disconnecting randomly

  - by Kalec

  I've bought an acer aspire 5742G about 2 months ago or so and it's been running great, but sometimes I used to hear the windows error beep but I had no idea what was causing it since the "bug" was automatically fixed so fast I couldn't even see an error message (also it kinda always happened when I was busy also, either in a game or while doing my homework). Later on my mouse would simply not work for 3-5 seconds then work again, I thought nothing of it at the time. I also had a problem where it only worked in one usb and one only. To move it I had to remove the battery, unplug the laptop and hold the power button for 2 minutes to reset the bios settings. Since today though it went nuts. Sometimes it disconnects / reconnects 12 times in 10 seconds and windows just keeps beeping till I unplug it, then it runs smooth for 5-6 minutes then it goes nuts again. Other times it seems like it skips (disconnects for a fraction of a second) other times just for 2-3 seconds. But this is incredibly frustrating. Sometimes the power just goes down (the laser turns off) and well that at least I would understand but this is a rare occurrence. Now I know the usb ports work since I have a lot of other devices connected and I tried the mouse on a room m8's laptop so the mouse also works. My only conclusion is that it's an operating system / settings bug and / or problem (I have tried the mouse in all ports by the way). All drivers and bios are up to date (maybe except mouse but I can't seem to update that and the mouse has no name, just a serial number which helps with nothing. Still it worked till today and nothing should have changed any way). I have made sure windows can't shut it down to save power (in device management). Also I tried to delete the drivers and re-install them, rebooting and the power button trick but nothing. Most I have done is get rid of the 12 disconnects / reconnects every 10 seconds :) but that's all :( I would buy a new one but I'm afraid it might do the same thing. ****EDIT****** Tried the mouse again at a friend but now it didn't even install it's software nor did the update work. Think I'll just buy a new one but I'd still like a suggestion at least so I'll leave this open #### EDIT 2 Now it works again, I can't explain this. Still thinking of getting a new one though

  Read the article

• No Telnet login prompt when used over SSH tunnel

  - by SCO

  Hi there ! I have a device, let's call it d1, runnning a lightweight Linux. This device is NATed by my internet box/router, hence not reachable from the Internet. That device runs a telnet daemon on it, and only has root as user (no pwd). Its ip address is 192.168.0.126 on the private network. From the private network (let's say 192.168.0.x), I can do: telnet 192.168.0.126 Where 192.168.0.126 is the IP address in the private network. This works correctly. However, to allow administration, I'd need to access that device from outside of that private network. Hence, I created an SSH tunnel like this on d1 : ssh -R 4455:localhost:23 ussh@s1 s1 is a server somewhere in the private network (but this is for testing purposes only, it will endup somewhere in the Internet), running a standard Linux distro and on which I created a user called 'ussh'. s1 IP address is 192.168.0.48. When I 'telnet' with the following, let's say from c1, 192.168.0.19 : telnet -l root s1 4455 I get : Trying 192.168.0.48... Connected to 192.168.0.48. Escape character is '^]'. Connection closed by foreign host . The connection is closed after roughly 30 seconds, and I didn't log. I tried without the -l switch, without any success. I tried to 'telnet' with IP addresses instead of names to avoid reverse DNS issues (although I added to d1 /etc/hosts a line refering to s1 IP/name, just in case), no success. I tried on another port than 4455, no success. I gathered Wireshark logs from s1. I can see : s1 sends SSH data to c1, c1 ACK s1 performs an AAAA DNS request for c1, gets only the Authoritave nameservers. s1 performs an A DNS request, then gets c1's IP address s1 sends a SYN packet to c1, c1 replies with a RST/ACK s1 sends a SYN to c1, C1 RST/ACK (?) After 0.8 seconds, c1 sends a SYN to s1, s1 SYN/ACK and then c1 ACK s1 sends SSH content to d1, d1 sends an ACK back to s1 s1 retries AAAA and A DNS requests After 5 seconds, s1 retries a SYN to c1, once again it is RST/ACKed by c1. This is repeated 3 more times. The last five packets : d1 sends SSH content to s1, s1 sends ACK and FIN/ACK to c1, c1 replies with FIN/ACK, s1 sends ACK to c1. The connection seems to be closed by the telnet daemon after 22 seconds. AFAIK, there is no way to decode the SSH stream, so I'm really stuck here ... Any ideas ? Thank you !

  Read the article

• How do I extend the virsh/qemu/libvirt Timeout?

  - by Nick

  There's a known issue with starting virtual machines with large hard drive images. Apparently, the time-out is 3 seconds, but in reality, it can take up to 15 seconds for a machine to start. I've read several bug reports, and people confirming it's a time-out problem, but I have yet to see a solution. Is there an option I can pass, like: virsh start MyMachine --ignore-timeout Or a config file that needs changed? Thanks!

  Read the article

• Computer experiencing slowdowns and lockups despite low cpu useage

  - by user157145

  my setup i5-2300 nvidia gtx 550 ti 6 gigs ram 600 w ocz modular psu recently reformatted and already experiencing drastic slowdown as soon as windows comes up, including repeated lockups with multiple various programs reporting that they are not responsive, then recovering after 10-30 seconds. ive checked memory and hard drive both of which come out fine. despite my plethura of worthless antiviral software im forced to assume that my illicit downloading practices have lead me into some comp trouble that i cant seem to determine. i have used ccleaner, search and destroy and malware bytes, all of which have found nothing to indicate what is causing this massive slowdown. in addition according to my resource manager my computer is operating at a load of only 30-50 percent CPU useage and 60 ram useage but taking 5-10 seconds to load files and open folders, and repeated lockups of multiple programs, especially firefox which seems to go unresponsive every 2-3 minutes. any help would be appreciated, i used a program called OTL by old timer, but cant make any sense of the results i was given. any help or suggestions would be appreciated, thank you for taking the time to read this i have avast but it didnt even find anything when i had it do a full system scan, so im thinking its clueless(also nortons, avg, and ad-aware). i also have mse but it has yet to complete a full scan it takes so long (i left it on last night but when i woke up my computer had a problem and had to restart). my hard drive has 300 gigs out of 1tb open and i already used hd tune pro, which said my harddrive was fine and its not a ssd. also im a noob at comps and only have the hd that is currently inside the computer in addition im not sure if studdering is the issue im suffering. my problem is that during my typing of these responses firefox has gone "not responsive" at least 5 times, each for times of about 5-10 seconds. when i try to control alt delete to bring up windows task manager it took 20 seconds. essentially its that my computer goes super slow at bringing up anything, or taking any action whatsoever that opens a program or file and has repeated incidents where i cant even click on whatever im trying to do because it locks up. the confusing thing about these incidents is that its right after restarting where there are minimal programs running and the computer and memory load is light.

  Read the article

• Check mysql slow queries

  - by Rafal Kaminski

  Is it possible to monitoring mysql like: if some queries is run more then 300 seconds - it will be warnings if some queries is run more then 500 seconds - it will be critical I tried: /usr/lib/nagios/plugins/check_mysql_health --hostname localhost --username icinga --password XXX --mode slow-queries --warning 300 But is show only rate slow_queries/per second :( Do you have some idea how i can monitoring sth. like i want? Thank you for help. Br,

  Read the article

• Access report prints slow

  - by BoundforPNG

  I have an access report that comes up in a few seconds in the preview mode. When I try to print it takes about 45 seconds to print. Any ideas why this might be? This is done in Access 2003. Thanks, Paul

  Read the article

• Does Chrome use a different DNS server while Firefox and IE use a different one?

  - by Jian Lin

  Is the common set up for Chrome that it will use a different DNS server, while Firefox and IE will use a different one? My Chrome (including the one on the virtual PC) will sometimes "Resolving host" and wait there for 20, 30 seconds, while Firefox and IE won't. (so after 20, 30 seconds with a blank page, the page will finally not be able to load). So is there something that Chrome is doing that make the difference?

  Read the article

• Holding off Windows 2000/3 Server in Shutdown

  - by user1668993

  We have a C# VS2010 application running on a Windows 2000 Server box (there is also a Windows 2003 Server box) as pretty much the only application running. We remove power from the box. There is a short duration battery (maybe 3 minutes of power) which then waits 10 seconds and then decides things are coming down and notifies Windows that it needs to shut down. Windows sends a CTRL_SHUTDOWN_EVENT event to the application which fields it and tries to keep Windows from going down for a while to let another computer which communicates with this one time to do some file work on the first computer. It does this by a timing loop and after the loop is over, it exits gracefully and the computer shuts down. Nice plan but it doesn't work. The application gets to maybe 20 seconds and the application is forcibly killed by Windows and Windows shuts down. At 90 seconds, the hardware firmware running the battery turns off power to the computer. I have tried searching to find out how to hold off Windows for a bit of time. I tried creating (it wasn't there) the HKEY_LOCAL_MACHINE subtree: \SYSTEM\CurrentControlSet\Control\WaitToKillAppTimeout registry key to 60000 but though it seemed to keep the popup from happening, Windows itself died at about the same amount of time -- we think without having the opportunity to shut itself down gracefully. Maybe the registry key worked but wasn't enough. Basically I have an "ill-mannered" application which is refusing to shut down (for the best of reasons) and without the registry key thing, Windows eventually shuts it down anyway and then shuts itself down. With the registry change, we think what is happening is that Windows doesn't shut down the application but Windows itself is killed suddenly without shutting down but power is still not pulled for about another minute, and then power is pulled. So maybe we have layers here. First there is how long the application tries to stay open. Then there is how long Windows is prepared to allow it to stay open. Then there is ... something... which kills windows. Then there is the power loss. Anyone have any ideas how we can get windows to stay open and in operation say to 70 seconds instead of about 20? Is our registry key right, but not enough? Is there some additional key we need to set to determine how long after windows is notified of a shutdown before it just kills itself? Thanks in advance.

  Read the article

• Windows 7 freezing after returning from idle.

  - by myname

  If i return to my windows 7 x64 computer after it has been idle for a couple of minutes it will respond for 3 seconds and after that everything freezes for around 5-30 seconds and then the computer starts working normally again. The freezing time varies and some times it even get stuck there forever requiring a hard reboot. This is very annoying as you can imagine, it's almost as slow as resuming from hibernation every time you left it idle enough to turn off the monitor.

  Read the article

• Adjust Subtitles track

  - by CodingTales

  How do you adjust the subtitles track? I have a video and I downloaded the subtitles from somewhere. It is a few seconds after the video. I mean can you push the track a few seconds forward or pull it backward in either VLC or Windows Media Player?

  Read the article

• Disable SQL Server at windows startup (VS 2010)

  - by ile

  After I installed Windows 7, booting lasted for about 40 seconds. Then I installed VS2010 and booting is 20 seconds longer. In task manager I see SQL Server process running. Is there a way to disable these programs at startup and fasten booting?

  Read the article

• How can I configure desktop notification display time in Google Chrome?

  - by netvope

  Recently Gmail introduced an HTML5-based desktop notification feature for Google Chrome users (see this). It's very useful, however, the notifications disappear too quickly (in about 5 seconds) and I couldn't find a way to change the display time. Ideally, I would like the notification to stay for a few minutes if there is no user activity (or about 15 seconds if there is user activity). Is that possible?

  Read the article

• Message from Nagios Server

  - by user12213

  Nagios Server is monitoring my Server which hosts Windows Sharepoint. I am getting the following 2 alerts in my inbox from Nagios Server 1. Service: C:\ Drive Space State: CRITICAL Additional Info: CRITICAL - Socket timeout after 10 seconds 2. Service: CPU Load State: CRITICAL Additional Info: CRITICAL - Socket timeout after 10 seconds What do I infer from these?

  Read the article

• Why do I have such high overhead when creating tables in MSSQL7?

  - by scotty2012

  I have an old system running MSSQL7. It takes about 10.5 seconds to create the table below and another 30 seconds to add the index. Is there anything I can do to decrease these times? CREATE TABLE [dbo].[MyTable] ( [queue] [int] NOT NULL , [seqNum] [numeric](12, 0) NOT NULL , [cTime] [char] (14) NOT NULL , [msg] [char] (255) NULL , [status] [int] NOT NULL , [socket] [int] NULL ) ON [PRIMARY] GO CREATE INDEX [search] ON [dbo].[MyTable]([queue], [seqNum], [status]) ON [PRIMARY] GO CREATE INDEX [new] ON [dbo].[MyTable]([queue], [status]) ON [PRIMARY]

  Read the article

• why is LZMA SDK (7-zip) so slow

  - by Tono Nam

  I found 7-zip great and I will like to use it on .net applications. I have a 10MB file (a.001) and it takes: 2 seconds to encode. Now it will be nice if I could do the same thing on c#. I have downloaded http://www.7-zip.org/sdk.html LZMA SDK c# source code. I basically copied the CS directory into a console application in visual studio: Then I compiled and eveything compiled smoothly. So on the output directory I placed the file a.001 which is 10MB of size. On the main method that came on the source code I placed: [STAThread] static int Main(string[] args) { // e stands for encode args = "e a.001 output.7z".Split(' '); // added this line for debug try { return Main2(args); } catch (Exception e) { Console.WriteLine("{0} Caught exception #1.", e); // throw e; return 1; } } when I execute the console application the application works great and I get the output a.7z on the working directory. The problem is that it takes so long. It takes about 15 seconds to execute! I have also tried http://stackoverflow.com/a/8775927/637142 approach and it also takes very long. Why is it 10 times slower than the actual program ? Also Even if I set to use only one thread: It still takes much less time (3 seconds vs 15): (Edit) Another Possibility Could it be because C# is slower than assembly or C ? I notice that the algorithm does a lot of heavy operations. For example compare these two blocks of code. They both do the same thing: C void main() { time_t now; int i,j,k,x; long counter ; counter = 0; now = time(NULL); /* LOOP */ for(x=0; x<10; x++) { counter = -1234567890 + x+2; for (j = 0; j < 10000; j++) for(i = 0; i< 1000; i++) for(k =0; k<1000; k++) { if(counter > 10000) counter = counter - 9999; else counter= counter +1; } printf (" %d \n", time(NULL) - now); // display elapsed time } printf("counter = %d\n\n",counter); // display result of counter printf ("Elapsed time = %d seconds ", time(NULL) - now); gets("Wait"); } output c# static void Main(string[] args) { DateTime now; int i, j, k, x; long counter; counter = 0; now = DateTime.Now; /* LOOP */ for (x = 0; x < 10; x++) { counter = -1234567890 + x + 2; for (j = 0; j < 10000; j++) for (i = 0; i < 1000; i++) for (k = 0; k < 1000; k++) { if (counter > 10000) counter = counter - 9999; else counter = counter + 1; } Console.WriteLine((DateTime.Now - now).Seconds.ToString()); } Console.Write("counter = {0} \n", counter.ToString()); Console.Write("Elapsed time = {0} seconds", DateTime.Now - now); Console.Read(); } Output Note how much slower was c#. Both programs where run from outside visual studio on release mode. Maybe that is the reason why it takes so much longer in .net than on c++. Conclusion I cannot seem to know what is causing the problem. I guess I will use 7z.dll and invoke the necessary methods from c#. A library that does that is at: http://sevenzipsharp.codeplex.com/ and that way I am using the same library that 7zip is using as: // dont forget to add reference to SevenZipSharp located on the link I provided static void Main(string[] args) { // load the dll SevenZip.SevenZipCompressor.SetLibraryPath(@"C:\Program Files (x86)\7-Zip\7z.dll"); SevenZip.SevenZipCompressor compress = new SevenZip.SevenZipCompressor(); compress.CompressDirectory("MyFolderToArchive", "output.7z"); }

  Read the article

• Ado.net performance:What does SNIReadSync do?

  - by Beatles1692

  We have a query that takes 2 seconds to run in Sql Server Management Studio but it takes 13 seconds to be shown on a client screen. I used dotTrace to profile my source code and noticed there is this SNIReadSync method (part of ADO.net assemblies)that takes a lot of time to do its job(9 seconds).I ran my source over server so I could omit the network effects and the result was the same. It doesn't matter if I'm using OleDBConnection or SqlConnection. It doesn't matter if I'm using a DataReader or a DataSet. Connection pooling does not solve this issue(as my result shows). I googled this issue and I couldn't find an answer to the question that what this method is actually doing and how we can improve it. here's what I found on StakOverFlow that's not helpful either: http://stackoverflow.com/questions/1610874/snireadsync-executing-between-120-500-ms-for-a-simple-query-what-do-i-look-for

  Read the article

• Nested class or not nested class?

  - by eriks

  I have class A and list of A objects. A has a function f that should be executed every X seconds (for the first instance every 1 second, for the seconds instance every 5 seconds, etc.). I have a scheduler class that is responsible to execute the functions at the correct time. What i thought to do is to create a new class, ATime, that will hold ptr to A instance and the time A::f should be executed. The scheduler will hold a min priority queue of Atime. Do you think it is the correct implementation? Should ATime be a nested class of the scheduler?

  Read the article

• display image and script for a set period of time

  - by Ryan Max

  This is very similar to a question I asked the other day but my page code has become significantly more complicated and I need to revisit it. I've been using the following code: $('#myLink').click(function() { $('#myImg').attr('src', 'newImg.jpg'); setTimeout(function() { $('#myImg').attr('src', 'oldImg.jpg'); }, 15000); }); To replace an image for a set period of time (15 seconds) when the link is clicked, then after 15 seconds, revert to the original image. However now, I'd like to run a snippet of javascript as well when the link is clicked (in addition to replacing the image), and only when the link is clicked (it's related to the 15 second image) and then have the js code disappear as well after the 15 seconds...however I'm not sure how to have jquery send js code into the page...Basically I just want jQuery to "echo" this code onto the page underneath the 15 second while I am there, but I don't know how jquery formats this "echo". Does this question make sense?

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >