Search Results

Search found 711 results on 29 pages for 'trailing slash'.

Page 26/29 | < Previous Page | 22 23 24 25 26 27 28 29  | Next Page >

• Diff 2 files while ignoring parts of lines

  - by Millianz

  I would like to diff a file system. Currently my bash script prints out the file system recursively into a file (ls -l -R) and diffs it with an expected output. An example for a line in this file would be: drw---- 100000f3 00000400 0 ./foo/ My current diff command is diff "$TEMP_LOG" "$DIFF_FILE_OUT" --strip-trailing-cr --changed-group-format='%' --unchanged-group-format='' "$SubLog" As you can see I ignore additional lines in the current output file, I only care about lines that match with the master output. I now have the problem though that some files may differ in size, or a folder might even have a different name, but due to it's location I know what access rights it should have. For example: Output: ------- 00000000 00000000 528 ./foo/bar.txt Master: ------- 00000000 00000000 200 ./foo/bar.txt Only the size differs here, and it doesn't matter, I would like to just ignore certain parts of the diff, kind of like an ansi c comment. Master: ------- 00000000 00000000 /*200*/ ./foo/bar.txt -- OR -- Master: d------ 00000000 00000000 /*10*/ ./foo//*123123*///*76456546*//bar.txt Output: d------ 00000000 00000000 0 ./foo/asd/sdf/bar.txt And still have it diff correctly. Is this even possible with diff, or will I have to write a custom script for it? Since I'm fairly new to cygwin I might be using the completely wrong tool all together, I'm happy for any suggestions. Update: Taking a step back, here is the general task at hand that I want to achieve. I want to write a script that checks the file system to see if the read/write permissions are set up correctly. The structure of the file system is under my control, so I don't have to worry about it changing too much. Sometimes folders/files might not be present, but if they are their permissions must be checked. For Example assume that the following is a snapshot of the current file system structure drw ./foo drw ./foo/bar -rw ./foow/bar/bar.txt drw ./foo/baz -rw ./foo/baz/baz.txt And this is what the file system structure might dictate, i.e. if these folders / files are present, the permissions must match. drw ./foo drw ./foo/bar -rw ./foo/bar/bar.txt --- ./foo/bar/foobar.txt drw ./foo/baz -rw ./foo/baz/foobaz.txt In this case the file system checked out ok, since all files present match their expected values. The situation becomes more complicated as soon as certain folders might have any arbitrary name, only due to their location I know what their permissions should be. Assume that the directory ./foo/bar in the above example might be such a case, i.e. instead of bar the folder could have any name, but still match the -rw permissions. This seems like a very complicated situation, and I'm not even sure if I can solve it with bash scripting alone. I might have to write an actual application.

  Read the article

• Nginx fastcgi problems with django (double slashes in url?)

  - by wizard

  I'm deploying my first django app. I'm familiar with nginx and fastcgi from deploying php-fpm. I can't get python to recognize the urls. I'm also at a loss on how to debug this further. I'd welcome solutions to this problem and tips on debugging fastcgi problems. Currently I get a 404 page regardless of the url and for some reason a double slash For http://www.site.com/admin/ Page not found (404) Request Method: GET Request URL: http://www.site.com/admin// My urls.py from the debug output - which work in the dev server. Using the URLconf defined in ahrlty.urls, Django tried these URL patterns, in this order: ^listings/ ^admin/ ^accounts/login/$ ^accounts/logout/$ my nginx config server { listen 80; server_name beta.ahrlty.com; access_log /home/ahrlty/ahrlty/logs/access.log; error_log /home/ahrlty/ahrlty/logs/error.log; location /static/ { alias /home/ahrlty/ahrlty/ahrlty/static/; break; } location /media/ { alias /usr/lib/python2.6/dist-packages/django/contrib/admin/media/; break; } location / { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:8001; break; } } and my fastcgi_params fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param PATH_INFO $fastcgi_script_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; And lastly I'm running fastcgi from the commandline with django's manage.py. python manage.py runfcgi method=threaded host=127.0.0.1 port=8080 pidfile=mysite.pid minspare=4 maxspare=30 daemonize=false I'm having a hard time debugging this one. Does anything jump out at anybody? Notes nginx version: nginx/0.7.62 Django svn trunk rev 13013

  Read the article

• Dec 5th Links: ASP.NET, ASP.NET MVC, jQuery, Silverlight, Visual Studio

  - by ScottGu

  Here is the latest in my link-listing series.  Also check out my VS 2010 and .NET 4 series for another on-going blog series I’m working on. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET ASP.NET Code Samples Collection: J.D. Meier has a great post that provides a detailed round-up of ASP.NET code samples and tutorials from a wide variety of sources.  Lots of useful pointers. Slash your ASP.NET compile/load time without any hard work: Nice article that details a bunch of optimizations you can make to speed up ASP.NET project load and compile times. You might also want to read my previous blog post on this topic here. 10 Essential Tools for Building ASP.NET Websites: Great article by Stephen Walther on 10 great (and free) tools that enable you to more easily build great ASP.NET Websites.  Highly recommended reading. Optimize Images using the ASP.NET Sprite and Image Optimization Framework: A nice article by 4GuysFromRolla that discusses how to use the open-source ASP.NET Sprite and Image Optimization Framework (one of the tools recommended by Stephen in the previous article).  You can use this to significantly improve the load-time of your pages on the client. Formatting Dates, Times and Numbers in ASP.NET: Scott Mitchell has a great article that discusses formatting dates, times and numbers in ASP.NET.  A very useful link to bookmark.  Also check out James Michael’s DateTime is Packed with Goodies blog post for other DateTime tips. Examining ASP.NET’s Membership, Roles and Profile APIs (Part 18): Everything you could possibly want to known about ASP.NET’s built-in Membership, Roles and Profile APIs must surely be in this tutorial series. Part 18 covers how to store additional user info with Membership. ASP.NET with jQuery An Introduction to jQuery Templates: Stephen Walther has written an outstanding introduction and tutorial on the new jQuery Template plugin that the ASP.NET team has contributed to the jQuery project. Composition with jQuery Templates and jQuery Templates, Composite Rendering, and Remote Loading: Dave Ward has written two nice posts that talk about composition scenarios with jQuery Templates and some cool scenarios you can enable with them. Using jQuery and ASP.NET to Build a News Ticker: Scott Mitchell has a nice tutorial that demonstrates how to build a dynamically updated “news ticker” style UI with ASP.NET and jQuery. Checking All Checkboxes in a GridView using jQuery: Scott Mitchell has a nice post that covers how to use jQuery to enable a checkbox within a GridView’s header to automatically check/uncheck all checkboxes contained within rows of it. Using jQuery to POST Form Data to an ASP.NET AJAX Web Service: Rick Strahl has a nice post that discusses how to capture form variables and post them to an ASP.NET AJAX Web Service (.asmx). ASP.NET MVC ASP.NET MVC Diagnostics Using NuGet: Phil Haack has a nice post that demonstrates how to easily install a diagnostics page (using NuGet) that can help identify and diagnose common configuration issues within your apps. ASP.NET MVC 3 JsonValueProviderFactory: James Hughes has a nice post that discusses how to take advantage of the new JsonValueProviderFactory support built into ASP.NET MVC 3.  This makes it easy to post JSON payloads to MVC action methods. Practical jQuery Mobile with ASP.NET MVC: James Hughes has another nice post that discusses how to use the new jQuery Mobile library with ASP.NET MVC to build great mobile web applications. Credit Card Validator for ASP.NET MVC 3: Benjii Me has a nice post that demonstrates how to build a [CreditCard] validator attribute that can be used to easily validate credit card numbers are in the correct format with ASP.NET MVC. Silverlight Silverlight FireStarter Keynote and Sessions: A great blog post from John Papa that contains pointers and descriptions of all the great Silverlight content we published last week at the Silverlight FireStarter.  You can watch all of the talks online.  More details on my keynote and Silverlight 5 announcements can be found here. 31 Days of Windows Phone 7: 31 great tutorials on how to build Windows Phone 7 applications (using Silverlight).  Silverlight for Windows Phone Toolkit Update: David Anson has a nice post that discusses some of the additional controls provided with the Silverlight for Windows Phone Toolkit. Visual Studio JavaScript Editor Extensions: A nice (and free) Visual Studio plugin built by the web tools team that significantly improves the JavaScript intellisense support within Visual Studio. HTML5 Intellisense for Visual Studio: Gil has a blog post that discusses a new extension my team has posted to the Visual Studio Extension Gallery that adds HTML5 schema support to Visual Studio 2008 and 2010. Team Build + Web Deployment + Web Deploy + VS 2010 = Goodness: Visual blogs about how to enable a continuous deployment system with VS 2010, TFS 2010 and the Microsoft Web Deploy framework.  Visual Studio 2010 Emacs Emulation Extension and VIM Emulation Extension: Check out these two extensions if you are fond of Emacs and VIM key bindings and want to enable them within Visual Studio 2010. Hope this helps, Scott

  Read the article

• Azure &ndash; Part 6 &ndash; Blob Storage Service

  - by Shaun

  When migrate your application onto the Azure one of the biggest concern would be the external files. In the original way we understood and ensure which machine and folder our application (website or web service) is located in. So that we can use the MapPath or some other methods to read and write the external files for example the images, text files or the xml files, etc. But things have been changed when we deploy them on Azure. Azure is not a server, or a single machine, it’s a set of virtual server machine running under the Azure OS. And even worse, your application might be moved between thses machines. So it’s impossible to read or write the external files on Azure. In order to resolve this issue the Windows Azure provides another storage serviec – Blob, for us. Different to the table service, the blob serivce is to be used to store text and binary data rather than the structured data. It provides two types of blobs: Block Blobs and Page Blobs. Block Blobs are optimized for streaming. They are comprised of blocks, each of which is identified by a block ID and each block can be a maximum of 4 MB in size. Page Blobs are are optimized for random read/write operations and provide the ability to write to a range of bytes in a blob. They are a collection of pages. The maximum size for a page blob is 1 TB.   In the managed library the Azure SDK allows us to communicate with the blobs through these classes CloudBlobClient, CloudBlobContainer, CloudBlockBlob and the CloudPageBlob. Similar with the table service managed library, the CloudBlobClient allows us to reach the blob service by passing our storage account information and also responsible for creating the blob container is not exist. Then from the CloudBlobContainer we can save or load the block blobs and page blobs into the CloudBlockBlob and the CloudPageBlob classes.   Let’s improve our exmaple in the previous posts – add a service method allows the user to upload the logo image. In the server side I created a method name UploadLogo with 2 parameters: email and image. Then I created the storage account from the config file. I also add the validation to ensure that the email passed in is valid. 1: var storageAccount = CloudStorageAccount.FromConfigurationSetting("DataConnectionString"); 2: var accountContext = new DynamicDataContext<Account>(storageAccount); 3:  4: // validation 5: var accountNumber = accountContext.Load() 6: .Where(a => a.Email == email) 7: .ToList() 8: .Count; 9: if (accountNumber <= 0) 10: { 11: throw new ApplicationException(string.Format("Cannot find the account with the email {0}.", email)); 12: } Then there are three steps for saving the image into the blob service. First alike the table service I created the container with a unique name and create it if it’s not exist. 1: // create the blob container for account logos if not exist 2: CloudBlobClient blobStorage = storageAccount.CreateCloudBlobClient(); 3: CloudBlobContainer container = blobStorage.GetContainerReference("account-logo"); 4: container.CreateIfNotExist(); Then, since in this example I will just send the blob access URL back to the client so I need to open the read permission on that container. 1: // configure blob container for public access 2: BlobContainerPermissions permissions = container.GetPermissions(); 3: permissions.PublicAccess = BlobContainerPublicAccessType.Container; 4: container.SetPermissions(permissions); And at the end I combine the blob resource name from the input file name and Guid, and then save it to the block blob by using the UploadByteArray method. Finally I returned the URL of this blob back to the client side. 1: // save the blob into the blob service 2: string uniqueBlobName = string.Format("{0}_{1}.jpg", email, Guid.NewGuid().ToString()); 3: CloudBlockBlob blob = container.GetBlockBlobReference(uniqueBlobName); 4: blob.UploadByteArray(image); 5:  6: return blob.Uri.ToString(); Let’s update a bit on the client side application and see the result. Here I just use my simple console application to let the user input the email and the file name of the image. If it’s OK it will show the URL of the blob on the server side so that we can see it through the web browser. Then we can see the logo I’ve just uploaded through the URL here. You may notice that the blob URL was based on the container name and the blob unique name. In the document of the Azure SDK there’s a page for the rule of naming them, but I think the simple rule would be – they must be valid as an URL address. So that you cannot name the container with dot or slash as it will break the ADO.Data Service routing rule. For exmaple if you named the blob container as Account.Logo then it will throw an exception says 400 Bad Request.   Summary In this short entity I covered the simple usage of the blob service to save the images onto Azure. Since the Azure platform does not support the file system we have to migrate our code for reading/writing files to the blob service before deploy it to Azure. In order to reducing this effort Microsoft provided a new approch named Drive, which allows us read and write the NTFS files just likes what we did before. It’s built up on the blob serivce but more properly for files accessing. I will discuss more about it in the next post.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• String Format for DateTime in C#

  - by SAMIR BHOGAYTA

  String Format for DateTime [C#] This example shows how to format DateTime using String.Format method. All formatting can be done also using DateTime.ToString method. Custom DateTime Formatting There are following custom format specifiers y (year), M (month), d (day), h (hour 12), H (hour 24), m (minute), s (second), f (second fraction), F (second fraction, trailing zeroes are trimmed), t (P.M or A.M) and z (time zone). Following examples demonstrate how are the format specifiers rewritten to the output. [C#] // create date time 2008-03-09 16:05:07.123 DateTime dt = new DateTime(2008, 3, 9, 16, 5, 7, 123); String.Format("{0:y yy yyy yyyy}", dt); // "8 08 008 2008" year String.Format("{0:M MM MMM MMMM}", dt); // "3 03 Mar March" month String.Format("{0:d dd ddd dddd}", dt); // "9 09 Sun Sunday" day String.Format("{0:h hh H HH}", dt); // "4 04 16 16" hour 12/24 String.Format("{0:m mm}", dt); // "5 05" minute String.Format("{0:s ss}", dt); // "7 07" second String.Format("{0:f ff fff ffff}", dt); // "1 12 123 1230" sec.fraction String.Format("{0:F FF FFF FFFF}", dt); // "1 12 123 123" without zeroes String.Format("{0:t tt}", dt); // "P PM" A.M. or P.M. String.Format("{0:z zz zzz}", dt); // "-6 -06 -06:00" time zone You can use also date separator / (slash) and time sepatator : (colon). These characters will be rewritten to characters defined in the current DateTimeForma­tInfo.DateSepa­rator and DateTimeForma­tInfo.TimeSepa­rator. [C#] // date separator in german culture is "." (so "/" changes to ".") String.Format("{0:d/M/yyyy HH:mm:ss}", dt); // "9/3/2008 16:05:07" - english (en-US) String.Format("{0:d/M/yyyy HH:mm:ss}", dt); // "9.3.2008 16:05:07" - german (de-DE) Here are some examples of custom date and time formatting: [C#] // month/day numbers without/with leading zeroes String.Format("{0:M/d/yyyy}", dt); // "3/9/2008" String.Format("{0:MM/dd/yyyy}", dt); // "03/09/2008" // day/month names String.Format("{0:ddd, MMM d, yyyy}", dt); // "Sun, Mar 9, 2008" String.Format("{0:dddd, MMMM d, yyyy}", dt); // "Sunday, March 9, 2008" // two/four digit year String.Format("{0:MM/dd/yy}", dt); // "03/09/08" String.Format("{0:MM/dd/yyyy}", dt); // "03/09/2008" Standard DateTime Formatting In DateTimeForma­tInfo there are defined standard patterns for the current culture. For example property ShortTimePattern is string that contains value h:mm tt for en-US culture and value HH:mm for de-DE culture. Following table shows patterns defined in DateTimeForma­tInfo and their values for en-US culture. First column contains format specifiers for the String.Format method. Specifier DateTimeFormatInfo property Pattern value (for en-US culture) t ShortTimePattern h:mm tt d ShortDatePattern M/d/yyyy T LongTimePattern h:mm:ss tt D LongDatePattern dddd, MMMM dd, yyyy f (combination of D and t) dddd, MMMM dd, yyyy h:mm tt F FullDateTimePattern dddd, MMMM dd, yyyy h:mm:ss tt g (combination of d and t) M/d/yyyy h:mm tt G (combination of d and T) M/d/yyyy h:mm:ss tt m, M MonthDayPattern MMMM dd y, Y YearMonthPattern MMMM, yyyy r, R RFC1123Pattern ddd, dd MMM yyyy HH':'mm':'ss 'GMT' (*) s SortableDateTi­mePattern yyyy'-'MM'-'dd'T'HH':'mm':'ss (*) u UniversalSorta­bleDateTimePat­tern yyyy'-'MM'-'dd HH':'mm':'ss'Z' (*) (*) = culture independent Following examples show usage of standard format specifiers in String.Format method and the resulting output. [C#] String.Format("{0:t}", dt); // "4:05 PM" ShortTime String.Format("{0:d}", dt); // "3/9/2008" ShortDate String.Format("{0:T}", dt); // "4:05:07 PM" LongTime String.Format("{0:D}", dt); // "Sunday, March 09, 2008" LongDate String.Format("{0:f}", dt); // "Sunday, March 09, 2008 4:05 PM" LongDate+ShortTime String.Format("{0:F}", dt); // "Sunday, March 09, 2008 4:05:07 PM" FullDateTime String.Format("{0:g}", dt); // "3/9/2008 4:05 PM" ShortDate+ShortTime String.Format("{0:G}", dt); // "3/9/2008 4:05:07 PM" ShortDate+LongTime String.Format("{0:m}", dt); // "March 09" MonthDay String.Format("{0:y}", dt); // "March, 2008" YearMonth String.Format("{0:r}", dt); // "Sun, 09 Mar 2008 16:05:07 GMT" RFC1123 String.Format("{0:s}", dt); // "2008-03-09T16:05:07" SortableDateTime String.Format("{0:u}", dt); // "2008-03-09 16:05:07Z" UniversalSortableDateTime

  Read the article

• Minidlna Directory Issues

  - by Somnambulist

  I've done my searching and can't find an answer to THIS specific issue. I have my minidlna set up and running - but it's not really done properly. First off, when I open the server on my bluray player, all of my movies are listed twice - when they are certainly not saved on my external twice. Second, when I open the server - rather than reading "Movies" "TV" "Music", etc - It just mashes all of my movies, tv, and some other folders all together with no real organization. I never had this problem when I had my Windows set up, so I know it's something configured improperly more-so than my external drive giving me gruff. Here's my minidlna.conf file: # This is the configuration file for the MiniDLNA daemon, a DLNA/UPnP-AV media # server. # # Unless otherwise noted, the commented out options show their default value. # # On Debian, you can also refer to the minidlna.conf(5) man page for # documentation about this file. media_dir=/media/somnambulist/Ghost In You # This option can be specified more than once if you want multiple directories # scanned. # # If you want to restrict a media_dir to a specific content type, you can # prepend the directory name with a letter representing the type (A, P or V), # followed by a comma, as so: # * "A" for audio (eg. media_dir=A,/var/lib/minidlna/music) # * "P" for pictures (eg. media_dir=P,/var/lib/minidlna/pictures) # * "V" for video (eg. media_dir=V,/var/lib/minidlna/videos) # # WARNING: After changing this option, you need to rebuild the database. Either # run minidlna with the '-R' option, or delete the 'files.db' file # from the db_dir directory (see below). # On Debian, you can run, as root, 'service minidlna force-reload' instead. #media_dir=/var/lib/minidlna media_dir=V,/media/somnambulist/Ghost In You/Movies media_dir=V,/media/somnambulist/Ghost In You/TV media_dir=P,/home/somnambulist/Pictures # Path to the directory that should hold the database and album art cache. db_dir=/home/somnambulist/serverart # Path to the directory that should hold the log file. log_dir=/home/somnambulist/serverlog # Minimum level of importance of messages to be logged. # Must be one of "off", "fatal", "error", "warn", "info" or "debug". # "off" turns of logging entirely, "fatal" is the highest level of importance # and "debug" the lowest. #log_level=warn # Use a different container as the root of the directory tree presented to # clients. The possible values are: # * "." - standard container # * "B" - "Browse Directory" # * "M" - "Music" # * "P" - "Pictures" # * "V" - "Video" # if you specify "B" and client device is audio-only then "Music/Folders" will be used as root root_container=B # Network interface(s) to bind to (e.g. eth0), comma delimited. #network_interface= # IPv4 address to listen on (e.g. 192.0.2.1). #listening_ip= # Port number for HTTP traffic (descriptions, SOAP, media transfer). port=8200 # URL presented to clients. # The default is the IP address of the server on port 80. #presentation_url=http://example.com:80 # Name that the DLNA server presents to clients. friendly_name=Somnambulist Media Server # Serial number the server reports to clients. serial=12345678 # Model name the server reports to clients. #model_name=Windows Media Connect compatible (MiniDLNA) # Model number the server reports to clients. model_number=1 # Automatic discovery of new files in the media_dir directory. #inotify=yes # List of file names to look for when searching for album art. Names should be # delimited with a forward slash ("/"). album_art_names=Cover.jpg/cover.jpg/AlbumArtSmall.jpg/albumartsmall.jpg/AlbumArt.jpg/albumart.jpg/Album.jpg/album.jpg/Folder.jpg/folder.jpg/Thumb.jpg/thumb.jpg # Strictly adhere to DLNA standards. # This allows server-side downscaling of very large JPEG images, which may # decrease JPEG serving performance on (at least) Sony DLNA products. #strict_dlna=no # Support for streaming .jpg and .mp3 files to a TiVo supporting HMO. #enable_tivo=no # Notify interval, in seconds. #notify_interval=895 # Path to the MiniSSDPd socket, for MiniSSDPd support. #minissdpdsocket=/run/minissdpd.sock` And here's the error I get in terminal when I run: sudo service minidlna restart sudo service minidlna force-reload Force restart error: Restarting DLNA/UPnP-AV media server minidlna [2013/08/12 21:19:27] minidlna.c:474: error: Media directory "/media/somnambulist/Ghost In You/Movies" not accessible! [Permission denied] [2013/08/12 21:19:27] minidlna.c:474: error: Media directory "/media/somnambulist/Ghost In You/TV" not accessible! [Permission denied] Force-reload error: Restarting DLNA/UPnP-AV media server minidlna [2013/08/12 21:19:46] minidlna.c:474: error: Media directory "/media/somnambulist/Ghost In You/Movies" not accessible! [Permission denied] [2013/08/12 21:19:46] minidlna.c:474: error: Media directory "/media/somnambulist/Ghost In You/TV" not accessible! [Permission denied] rm: cannot remove ‘/home/somnambulist/serverart/files.db’: Permission denied rm: cannot remove ‘/home/somnambulist/serverart/art_cache/media/somnambulist/Ghost In You/Movies/Slumdog Millionaire/Slumdog.Millionaire.Cover.jpg’: Permission denied rm: cannot remove ‘/home/somnambulist/serverart/art_cache/media/somnambulist/Ghost In You/Movies/Zack and Miri Make a Porno/ZackAndMiriMakeAPornoCover.jpg’: Permission denied [2013/08/12 21:19:46] minidlna.c:744: warn: Failed to clean old file cache. [ OK ] I've spent hours on this at this point, read through various files - and even had a friend who is relatively Ubuntu-savvy try to help me via chat - no such luck. Thanks in advance for any help.

  Read the article

• Oracle apresenta resultados do ano

  - by pfolgado

  A Oracle acabou de apresentar os resultados do 4º trimestre e do ano fiscal FY11. Os resultados mais relevantes são: Receitas de Vendas cresceram 33%, atingindo um total de 35,6 mil milhões de dólares Vendas de Novas licenças cresceram 23% Receitas de Hardware de 4,4 mil milhões de dólares Resultados operacionais cresceram 39% Resultados por acção de cresceram 38% para 1,67 dólares “In Q4, we achieved a 19% new software license growth rate with almost no help from acquisitions,” said Oracle President and CFO, Safra Catz. “This strong organic growth combined with continuously improving operational efficiencies enabled us to deliver a 48% operating margin in the quarter. As our results reflect, we clearly exceeded even our own high expectations for Sun’s business.” “In addition to record setting software sales, our Exadata and Exalogic systems also made a strong contribution to our growth in Q4,” said Oracle President, Mark Hurd. “Today there are more than 1,000 Exadata machines installed worldwide. Our goal is to triple that number in FY12.” “In FY11 Oracle’s database business experienced its fastest growth in a decade,” said Oracle CEO, Larry Ellison. “Over the past few years we added features to the Oracle database for both cloud computing and in-memory databases that led to increased database sales this past year. Lately we’ve been focused on the big business opportunity presented by Big Data.” Oracle Reports Q4 GAAP EPS Up 34% To 62 Cents; Q4 NON-GAAP EPS Up 25% To 75 Cents Q4 Software New License Sales Up 19%, Q4 Total Revenue Up 13% Oracle today announced fiscal 2011 Q4 GAAP total revenues were up 13% to $10.8 billion, while non-GAAP total revenues were up 12% to $10.8 billion. Both GAAP and non-GAAP new software license revenues were up 19% to $3.7 billion. Both GAAP and non-GAAP software license updates and product support revenues were up 15% to $4.0 billion. Both GAAP and non-GAAP hardware systems products revenues were down 6% to $1.2 billion. GAAP operating income was up 32% to $4.4 billion, and GAAP operating margin was 40%. Non-GAAP operating income was up 19% to $5.2 billion, and non-GAAP operating margin was 48%. GAAP net income was up 36% to $3.2 billion, while non-GAAP net income was up 27% to $3.9 billion. GAAP earnings per share were $0.62, up 34% compared to last year while non-GAAP earnings per share were up 25% to $0.75. GAAP operating cash flow on a trailing twelve-month basis was $11.2 billion. For fiscal year 2011, GAAP total revenues were up 33% to $35.6 billion, while non-GAAP total revenues were up 33% to $35.9 billion. Both GAAP and non-GAAP new software license revenues were up 23% to $9.2 billion. GAAP software license updates and product support revenues were up 13% to $14.8 billion, while non-GAAP software license updates and product support revenues were up 13% to $14.9 billion. Both GAAP and non-GAAP hardware systems products revenues were $4.4 billion. GAAP operating income was up 33% to $12.0 billion, and GAAP operating margin was 34%. Non-GAAP operating income was up 27% to $15.9 billion, and non-GAAP operating margin was 44%. GAAP net income was up 39% to $8.5 billion, while non-GAAP net income was up 34% to $11.4 billion. GAAP earnings per share were $1.67, up 38% compared to last year while non-GAAP earnings per share were up 33% to $2.22. “In Q4, we achieved a 19% new software license growth rate with almost no help from acquisitions,” said Oracle President and CFO, Safra Catz. “This strong organic growth combined with continuously improving operational efficiencies enabled us to deliver a 48% operating margin in the quarter. As our results reflect, we clearly exceeded even our own high expectations for Sun’s business.” “In addition to record setting software sales, our Exadata and Exalogic systems also made a strong contribution to our growth in Q4,” said Oracle President, Mark Hurd. “Today there are more than 1,000 Exadata machines installed worldwide. Our goal is to triple that number in FY12.” “In FY11 Oracle’s database business experienced its fastest growth in a decade,” said Oracle CEO, Larry Ellison. “Over the past few years we added features to the Oracle database for both cloud computing and in-memory databases that led to increased database sales this past year. Lately we’ve been focused on the big business opportunity presented by Big Data.” In addition, Oracle also announced that its Board of Directors declared a quarterly cash dividend of $0.06 per share of outstanding common stock. This dividend will be paid to stockholders of record as of the close of business on July 13, 2011, with a payment date of August 3, 2011.

  Read the article

• Short Season, Long Models - Dealing with Seasonality

  - by Michel Adar

  Accounting for seasonality presents a challenge for the accurate prediction of events. Examples of seasonality include: ·         Boxed cosmetics sets are more popular during Christmas. They sell at other times of the year, but they rise higher than other products during the holiday season. ·         Interest in a promotion rises around the time advertising on TV airs ·         Interest in the Sports section of a newspaper rises when there is a big football match There are several ways of dealing with seasonality in predictions. Time Windows If the length of the model time windows is short enough relative to the seasonality effect, then the models will see only seasonal data, and therefore will be accurate in their predictions. For example, a model with a weekly time window may be quick enough to adapt during the holiday season. In order for time windows to be useful in dealing with seasonality it is necessary that: The time window is significantly shorter than the season changes There is enough volume of data in the short time windows to produce an accurate model An additional issue to consider is that sometimes the season may have an abrupt end, for example the day after Christmas. Input Data If available, it is possible to include the seasonality effect in the input data for the model. For example the customer record may include a list of all the promotions advertised in the area of residence. A model with these inputs will have to learn the effect of the input. It is possible to learn it specific to the promotion – and by the way learn about inter-promotion cross feeding – by leaving the list of ads as it is; or it is possible to learn the general effect by having a flag that indicates if the promotion is being advertised. For inputs to properly represent the effect in the model it is necessary that: The model sees enough events with the input present. For example, by virtue of the model lifetime (or time window) being long enough to see several “seasons” or by having enough volume for the model to learn seasonality quickly. Proportional Frequency If we create a model that ignores seasonality it is possible to use that model to predict how the specific person likelihood differs from average. If we have a divergence from average then we can transfer that divergence proportionally to the observed frequency at the time of the prediction. Definitions: Ft = trailing average frequency of the event at time “t”. The average is done over a suitable period of to achieve a statistical significant estimate. F = average frequency as seen by the model. L = likelihood predicted by the model for a specific person Lt = predicted likelihood proportionally scaled for time “t”. If the model is good at predicting deviation from average, and this holds over the interesting range of seasons, then we can estimate Lt as: Lt = L * (Ft / F) Considering that: L = (L – F) + F Substituting we get: Lt = [(L – F) + F] * (Ft / F) Which simplifies to: (i)                  Lt = (L – F) * (Ft / F)  +  Ft This latest expression can be understood as “The adjusted likelihood at time t is the average likelihood at time t plus the effect from the model, which is calculated as the difference from average time the proportion of frequencies”. The formula above assumes a linear translation of the proportion. It is possible to generalize the formula using a factor which we will call “a” as follows: (ii)                Lt = (L – F) * (Ft / F) * a  +  Ft It is also possible to use a formula that does not scale the difference, like: (iii)               Lt = (L – F) * a  +  Ft While these formulas seem reasonable, they should be taken as hypothesis to be proven with empirical data. A theoretical analysis provides the following insights: The Cumulative Gains Chart (lift) should stay the same, as at any given time the order of the likelihood for different customers is preserved If F is equal to Ft then the formula reverts to “L” If (Ft = 0) then Lt in (i) and (ii) is 0 It is possible for Lt to be above 1. If it is desired to avoid going over 1, for relatively high base frequencies it is possible to use a relative interpretation of the multiplicative factor. For example, if we say that Y is twice as likely as X, then we can interpret this sentence as: If X is 3%, then Y is 6% If X is 11%, then Y is 22% If X is 70%, then Y is 85% - in this case we interpret “twice as likely” as “half as likely to not happen” Applying this reasoning to (i) for example we would get: If (L < F) or (Ft < (1 / ((L/F) + 1)) Then  Lt = L * (Ft / F) Else Lt = 1 – (F / L) + (Ft * F / L)  

  Read the article

• Loading XML file containing leading zeros with SSIS preserving the zeros

  - by Compudicted

  Visiting the MSDN SQL Server Integration Services Forum oftentimes I could see that people would pop up asking this question: “why I am not able to load an element from an XML file that contains zeros so the leading/trailing zeros would remain intact?”. I started to suspect that such a trivial and often-required operation perhaps is being misunderstood by the developer community. I would also like to add that the whole state of affairs surrounding the XML today is probably also going to be increasingly affected by a motion of people who dislike XML in general and many aspects of it as XSD and XSLT invoke a negative reaction at best. Nevertheless, XML is in wide use today and its importance as a bridge between diverse systems is ever increasing. Therefore, I deiced to write up an example of loading an arbitrary XML file that contains leading zeros in one of its elements using SSIS so the leading zeros would be preserved keeping in mind the goal on simplicity into a table in SQL Server database. To start off bring up your BIDS (running as admin) and add a new Data Flow Task (DFT). This DFT will serve as container to adding our XML processing elements (besides, the XML Source is not available anywhere else other than from within the DFT). Double-click your DFT and drag and drop the XMS Source component from the Tool Box’s Data Flow Sources. Now, let the fun begin! Being inspired by the upcoming Christmas I created a simple XML file with one set of data that contains an imaginary SSN number of Rudolph containing several leading zeros like 0000003. This file can be viewed here. To configure the XML Source of course it is quite intuitive to point it to our XML file, next what the XML source needs is either an embedded schema (XSD) or it can generate one for us. In lack of the one I opted to auto-generate it for me and I ended up with an XSD that looked like: <?xml version="1.0"?> <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xs:element name="XMasEvent"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="CaseInfo"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="ID" type="xs:unsignedByte" /> <xs:element minOccurs="0" name="CreatedDate" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="LastName" type="xs:string" /> <xs:element minOccurs="0" name="FirstName" type="xs:string" /> <xs:element minOccurs="0" name="SSN" type="xs:unsignedByte" /> <!-- Becomes string -- > <xs:element minOccurs="0" name="DOB" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="Event" type="xs:string" /> <xs:element minOccurs="0" name="ClosedDate" /> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> As an aside on the XML file: if your XML file does not contain the outer node (<XMasEvent>) then you may end up in a situation where you see just one field in the output. Now please note that the SSN element’s data type was chosen to be of unsignedByte (and this is for a reason). The reason is stemming from the fact all our figures in the element are digits, this is good, but this is not exactly what we need, because if we will attempt to load the data with this XSD then we are going to either get errors on the destination or most typically lose the leading zeros. So the next intuitive choice is to change the data type to string. Besides, if a SSIS package was already created based on this XSD and the data type change was done thereafter, one should re-set the metadata by right-clicking the XML Source and choosing “Advanced Editor” in which there is a refresh button at the bottom left which will do the trick. So far so good, we are ready to load our XML file, well actually yes, and no, in my experience typically some data conversion may be required. So depending on your data destination you may need to tweak the data types targeted. Let’s add a Data Conversion Task to our DFT. Your package should look like: To make the story short I only will cover the SSN field, so in my data source the target SQL Table has it as nchar(10) and we chose string in our XSD (yes, this is a big difference), under such circumstances the SSIS will complain. So will go and manipulate on the data type of SSN by making it Unicode String (DT_WSTR), World String per se. The conversion should look like: The peek at the Metadata: We are almost there, now all we need is to configure the destination. For simplicity I chose SQL Server Destination. The mapping is a breeze, F5 and I am able to insert my data into SQL Server now! Checking the zeros – they are all intact!

  Read the article

• Lazy HTML attributes wrapping in Internet Explorer

  - by AGS777

  Having encountered this Internet Explorer (all versions) behavior several times previously, I eventually decided to share this most probably useless knowledge. Excuse my lengthy explanations because I am going to show the behavior along with a very simple case when one can come across it inadvertently. Let's say I want to implement some simple templating solution in JavaScript. I wrote an HTML template with an intention to bind data to it on the client side: Please note, that name of the “sys-template” class is just a coincidence. I do not use any ASP.NET AJAX code in this simple example. As you can see we need to replace placeholders (property name wrapped with curly braces) with actual data. Also, as you can see, many of the placeholders are situated within attribute values and it is where the danger lies. I am going to use <a /> element HTML as a template and replace each placeholder pattern with respective properties’ values with a little bit of jQuery like this: You can find complete code along with the contextFormat() method definition at the end of the post. Let’s assume that value for the name property (that we want to put in the title attribute) of the first data item is “first tooltip”. So it consists of two words. When the replacement occurred, title attribute should contain the “first tooltip” text which we are going to see as a tooltip for the <a /> element. But let’s run the sample code in Internet Explorer and check it out. What you’ll see is that only the first word of the supposed “title” attribute’s content is shown. So, were is the rest of my attribute and what happened? The answer is obvious once you see the result of jQuery(“.sys-template”).html() line for the given HTML markup. In IE you’ll get the following <A id={id} class={cssClass} title={name} href="{source}" myAttr="{attr}">Link to {source}</A> See any difference between this HTML and the one shown earlier? No? Then look carefully. While the original HTML of the <a /> element is well-formed and all the attributes are correctly quoted, when you take the same HTML back in Internet Explorer (it doesn’t matter whether you use html() method from jQuery library or IE’s innerHTML directly), you lose attributes’ quotes for some of the attributes. Then, after replacement, we’ll get following HTML for our first data item. I marked the attribute value in question with italic: <A id=1 class=first title=first tooltip href="first.html" myAttr="firstAttr">Link to first.html</A> Now you can easily imagine for yourself what happens when this HTML is inserted into the document and why we do not see the second (and any subsequent words if any) of our title attribute in the tooltip. There are still two important things to note. The first one (and it actually the reason why I named the post “lazy wrapping” is that if value of the HTML attribute does contains spaces in the original HTML, then it WILL be wrapped with quotation marks. For example, if I wrote following on my page (note the trailing space for the title attribute value) <a href="{source}" title="{name}  " id="{id}" myAttr="{attr}" class="{cssClass}">Link to {source}</a> then I would have my placeholder quoted correctly and the result of the replacement would render as expected: The second important thing to note is that there are exceptions for the lazy attributes wrapping rule in IE. As you can see href attribute value did not contain spaces exactly as all the other attributes with placeholders, but it was still returned correctly quoted Custom attribute myAttr is also quoted correctly when returned back from document, though its placeholder value does not contain spaces either. Now, on account of the highly unlikely probability that you found this information useful and need a solution to the problem the aforementioned behavior introduces for Internet Explorer browser, I can suggest a simple workaround – manually quote the mischievous attributes prior the placeholder pattern is replaced. Using the code of contextFormat() method shown below, you would need to add following line right before the return statement: result = result.replace(/=({([^}]+)})/g, '="$1"'); Below please find original sample code:

  Read the article

• JDeveloper does not recognize existing subversion working directory

  - by Bob Webster

  Just a quick note about an issue where JDeveloper no longer recognized an existing subversion working directory. Symptom:  JDeveloper Versioning menu offers to Version an Application that is already versioned in svn. Cause: The repository url contained in the hidden .svn folders of the working directory is no longer valid. Solution: Determine the correct url for the Subversion repository and update the .svn working directory.Fix the url contained in the svn folders of the working directory using the svn switch command. Example:           In a shell change directory to the Application folder.           Run the svn info command to confirm the current settings.                $ svn info                   Path: .                   URL: http://192.168.1.128/repos/jdeveloperrepo/AsyncExamples/BPELCallAsync/trunk                   Repository Root: http://192.168.1.128/repos/jdeveloperrepo                   Repository UUID: 3dc5eb88-3001-0010-8d6e-fd6f73825647                   Revision: 145                   Node Kind: directory                   Schedule: normal                   Last Changed Rev: 145                   Last Changed Date: 2012-06-07 07:15:56 -0700 (Thu, 07 Jun 2012)            In this case, the IP address in the repository URL is incorrect,           the svn server is located at 192.168.56.1           Note: The IP Address currently set is displayed after the Project Name in the            Application Navigator.  See the screen snapshot above.            Run the svn switch command with the --relocate option            Provide as much of the urls as necessary to correctly rewrite the url from current to new.            For example,            to change the repository server address from 192.168.1.128   to   192.168.56.1                     $  svn switch --relocate  http://192.168.1.128   http://192.168.56.1  .                               (Note the trailing period in the above command)           When the url is correct, JDeveloper should recognize the Subversion Working Directory.

  Read the article

• Using a mounted NTFS share with nginx

  - by Hoff

  I have set up a local testing VM with Ubuntu Server 12.04 LTS and the LEMP stack. It's kind of an unconventional setup because instead of having all my PHP scripts on the local machine, I've mounted an NTFS share as the document root because I do my development on Windows. I had everything working perfectly up until this morning, now I keep getting a dreaded 'File not found.' error. I am almost certain this must be somehow permission related, because if I copy my site over to /var/www, nginx and php-fpm have no problems serving my PHP scripts. What I can't figure out is why all of a sudden (after a reboot of the server), no PHP files will be served but instead just the 'File not found.' error. Static files work fine, so I think it's PHP that is causing the headache. Both nginx and php-fpm are configured to run as the user www-data: root@ubuntu-server:~# ps aux | grep 'nginx\|php-fpm' root 1095 0.0 0.0 5816 792 ? Ss 11:11 0:00 nginx: master process /opt/nginx/sbin/nginx -c /etc/nginx/nginx.conf www-data 1096 0.0 0.1 6016 1172 ? S 11:11 0:00 nginx: worker process www-data 1098 0.0 0.1 6016 1172 ? S 11:11 0:00 nginx: worker process root 1130 0.0 0.4 175560 4212 ? Ss 11:11 0:00 php-fpm: master process (/etc/php5/php-fpm.conf) www-data 1131 0.0 0.3 175560 3216 ? S 11:11 0:00 php-fpm: pool www www-data 1132 0.0 0.3 175560 3216 ? S 11:11 0:00 php-fpm: pool www www-data 1133 0.0 0.3 175560 3216 ? S 11:11 0:00 php-fpm: pool www root 1686 0.0 0.0 4368 816 pts/1 S+ 11:11 0:00 grep --color=auto nginx\|php-fpm I have mounted the NTFS share at /mnt/webfiles by editing /etc/fstab and adding the following line: //192.168.0.199/c$/Websites/ /mnt/webfiles cifs username=Jordan,password=mypasswordhere,gid=33,uid=33 0 0 Where gid 33 is the www-data group and uid 33 is the user www-data. If I list the contents of one of my sites you can in fact see that they belong to the user www-data: root@ubuntu-server:~# ls -l /mnt/webfiles/nTv5-2.0 total 8 drwxr-xr-x 0 www-data www-data 0 Jun 6 19:12 app drwxr-xr-x 0 www-data www-data 0 Aug 22 19:00 assets -rwxr-xr-x 0 www-data www-data 1150 Jan 4 2012 favicon.ico -rwxr-xr-x 0 www-data www-data 1412 Dec 28 2011 index.php drwxr-xr-x 0 www-data www-data 0 Jun 3 16:44 lib drwxr-xr-x 0 www-data www-data 0 Jan 3 2012 plugins drwxr-xr-x 0 www-data www-data 0 Jun 3 16:45 vendors If I switch to the www-data user, I have no problem creating a new file on the share: root@ubuntu-server:~# su www-data $ > /mnt/webfiles/test.txt $ ls -l /mnt/webfiles | grep test\.txt -rwxr-xr-x 0 www-data www-data 0 Sep 8 11:19 test.txt There should be no problem reading or writing to the share with php-fpm running as the user www-data. When I examine the error log of nginx, it's filled with a bunch of lines that look like the following: 2012/09/08 11:22:36 [error] 1096#0: *1 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 192.168.0.199, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.0.123" 2012/09/08 11:22:39 [error] 1096#0: *1 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 192.168.0.199, server: , request: "GET /apc.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.0.123" It's bizarre that this was working previously and now all of sudden PHP is complaining that it can't "find" the scripts on the share. Does anybody know why this is happening? EDIT I tried editing php-fpm.conf and changing chdir to the following: chdir = /mnt/webfiles When I try and restart the php-fpm service, I get the error: Starting php-fpm [08-Sep-2012 14:20:55] ERROR: [pool www] the chdir path '/mnt/webfiles' does not exist or is not a directory This is a total load of bullshit because this directory DOES exist and is mounted! Any ls commands to list that directory work perfectly. Why the hell can't PHP-FPM see this directory?! Here are my configuration files for reference: nginx.conf user www-data; worker_processes 2; error_log /var/log/nginx/nginx.log info; pid /var/run/nginx.pid; events { worker_connections 1024; multi_accept on; } http { include fastcgi.conf; include mime.types; default_type application/octet-stream; set_real_ip_from 127.0.0.1; real_ip_header X-Forwarded-For; ## Proxy proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 32m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffers 32 4k; ## Compression gzip on; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; ### TCP options tcp_nodelay on; tcp_nopush on; keepalive_timeout 65; sendfile on; include /etc/nginx/sites-enabled/*; } my site config server { listen 80; access_log /var/log/nginx/$host.access.log; error_log /var/log/nginx/error.log; root /mnt/webfiles/nTv5-2.0/app/webroot; index index.php; ## Block bad bots if ($http_user_agent ~* (HTTrack|HTMLParser|libcurl|discobot|Exabot|Casper|kmccrew|plaNETWORK|RPT-HTTPClient)) { return 444; } ## Block certain Referers (case insensitive) if ($http_referer ~* (sex|vigra|viagra) ) { return 444; } ## Deny dot files: location ~ /\. { deny all; } ## Favicon Not Found location = /favicon.ico { access_log off; log_not_found off; } ## Robots.txt Not Found location = /robots.txt { access_log off; log_not_found off; } if (-f $document_root/maintenance.html) { rewrite ^(.*)$ /maintenance.html last; } location ~* \.(?:ico|css|js|gif|jpe?g|png)$ { # Some basic cache-control for static files to be sent to the browser expires max; add_header Pragma public; add_header Cache-Control "max-age=2678400, public, must-revalidate"; } location / { try_files $uri $uri/ index.php; if (-f $request_filename) { break; } rewrite ^(.+)$ /index.php?url=$1 last; } location ~ \.php$ { include /etc/nginx/fastcgi.conf; fastcgi_pass unix:/var/run/php5-fpm.sock; } } php-fpm.conf ;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix (/opt/php5). This prefix can be dynamicaly changed by using the ; '-p' argument from the command line. ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. ; Relative path can also be used. They will be prefixed by: ; - the global prefix if it's been set (-p arguement) ; - /opt/php5 otherwise ;include=etc/fpm.d/*.conf ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Note: the default prefix is /opt/php5/var ; Default Value: none pid = /var/run/php-fpm.pid ; Error log file ; Note: the default prefix is /opt/php5/var ; Default Value: log/php-fpm.log error_log = /var/log/php5-fpm/php-fpm.log ; Log level ; Possible Values: alert, error, warning, notice, debug ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes ;daemonize = yes ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; Multiple pools of child processes may be started with different listening ; ports and different management options. The name of the pool will be ; used in logs and stats. There is no limitation on the number of pools which ; FPM can handle. Your system will tell you anyway :) ; Start a new pool named 'www'. ; the variable $pool can we used in any directive and will be replaced by the ; pool name ('www' here) [www] ; Per pool prefix ; It only applies on the following directives: ; - 'slowlog' ; - 'listen' (unixsocket) ; - 'chroot' ; - 'chdir' ; - 'php_values' ; - 'php_admin_values' ; When not set, the global prefix (or /opt/php5) applies instead. ; Note: This directive can also be relative to the global prefix. ; Default Value: none ;prefix = /path/to/pools/$pool ; The address on which to accept FastCGI requests. ; Valid syntaxes are: ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on ; a specific port; ; 'port' - to listen on a TCP socket to all addresses on a ; specific port; ; '/path/to/unix/socket' - to listen on a unix socket. ; Note: This value is mandatory. ;listen = 127.0.0.1:9000 listen = /var/run/php5-fpm.sock ; Set listen(2) backlog. A value of '-1' means unlimited. ; Default Value: 128 (-1 on FreeBSD and OpenBSD) ;listen.backlog = -1 ; List of ipv4 addresses of FastCGI clients which are allowed to connect. ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address ; must be separated by a comma. If this value is left blank, connections will be ; accepted from any ip address. ; Default Value: any ;listen.allowed_clients = 127.0.0.1 ; Set permissions for unix socket, if one is used. In Linux, read/write ; permissions must be set in order to allow connections from a web server. Many ; BSD-derived systems allow connections regardless of permissions. ; Default Values: user and group are set as the running user ; mode is set to 0666 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 ; Unix user/group of processes ; Note: The user is mandatory. If the group is not set, the default user's group ; will be used. user = www-data group = www-data ; Choose how the process manager will control the number of child processes. ; Possible Values: ; static - a fixed number (pm.max_children) of child processes; ; dynamic - the number of child processes are set dynamically based on the ; following directives: ; pm.max_children - the maximum number of children that can ; be alive at the same time. ; pm.start_servers - the number of children created on startup. ; pm.min_spare_servers - the minimum number of children in 'idle' ; state (waiting to process). If the number ; of 'idle' processes is less than this ; number then some children will be created. ; pm.max_spare_servers - the maximum number of children in 'idle' ; state (waiting to process). If the number ; of 'idle' processes is greater than this ; number then some children will be killed. ; Note: This value is mandatory. pm = dynamic ; The number of child processes to be created when pm is set to 'static' and the ; maximum number of child processes to be created when pm is set to 'dynamic'. ; This value sets the limit on the number of simultaneous requests that will be ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP ; CGI. ; Note: Used when pm is set to either 'static' or 'dynamic' ; Note: This value is mandatory. pm.max_children = 50 ; The number of child processes created on startup. ; Note: Used only when pm is set to 'dynamic' ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 pm.start_servers = 20 ; The desired minimum number of idle server processes. ; Note: Used only when pm is set to 'dynamic' ; Note: Mandatory when pm is set to 'dynamic' pm.min_spare_servers = 5 ; The desired maximum number of idle server processes. ; Note: Used only when pm is set to 'dynamic' ; Note: Mandatory when pm is set to 'dynamic' pm.max_spare_servers = 35 ; The number of requests each child process should execute before respawning. ; This can be useful to work around memory leaks in 3rd party libraries. For ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. ; Default Value: 0 pm.max_requests = 500 ; The URI to view the FPM status page. If this value is not set, no URI will be ; recognized as a status page. By default, the status page shows the following ; information: ; accepted conn - the number of request accepted by the pool; ; pool - the name of the pool; ; process manager - static or dynamic; ; idle processes - the number of idle processes; ; active processes - the number of active processes; ; total processes - the number of idle + active processes. ; max children reached - number of times, the process limit has been reached, ; when pm tries to start more children (works only for ; pm 'dynamic') ; The values of 'idle processes', 'active processes' and 'total processes' are ; updated each second. The value of 'accepted conn' is updated in real time. ; Example output: ; accepted conn: 12073 ; pool: www ; process manager: static ; idle processes: 35 ; active processes: 65 ; total processes: 100 ; max children reached: 1 ; By default the status page output is formatted as text/plain. Passing either ; 'html' or 'json' as a query string will return the corresponding output ; syntax. Example: ; http://www.foo.bar/status ; http://www.foo.bar/status?json ; http://www.foo.bar/status?html ; Note: The value must start with a leading slash (/). The value can be ; anything, but it may not be a good idea to use the .php extension or it ; may conflict with a real PHP file. ; Default Value: not set pm.status_path = /status ; The ping URI to call the monitoring page of FPM. If this value is not set, no ; URI will be recognized as a ping page. This could be used to test from outside ; that FPM is alive and responding, or to ; - create a graph of FPM availability (rrd or such); ; - remove a server from a group if it is not responding (load balancing); ; - trigger alerts for the operating team (24/7). ; Note: The value must start with a leading slash (/). The value can be ; anything, but it may not be a good idea to use the .php extension or it ; may conflict with a real PHP file. ; Default Value: not set ping.path = /ping ; This directive may be used to customize the response of a ping request. The ; response is formatted as text/plain with a 200 response code. ; Default Value: pong ping.response = pong ; The timeout for serving a single request after which the worker process will ; be killed. This option should be used when the 'max_execution_time' ini option ; does not stop script execution for some reason. A value of '0' means 'off'. ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) ; Default Value: 0 ;request_terminate_timeout = 0 ; The timeout for serving a single request after which a PHP backtrace will be ; dumped to the 'slowlog' file. A value of '0s' means 'off'. ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) ; Default Value: 0 ;request_slowlog_timeout = 0 ; The log file for slow requests ; Default Value: not set ; Note: slowlog is mandatory if request_slowlog_timeout is set ;slowlog = log/$pool.log.slow ; Set open file descriptor rlimit. ; Default Value: system defined value ;rlimit_files = 1024 ; Set max core size rlimit. ; Possible Values: 'unlimited' or an integer greater or equal to 0 ; Default Value: system defined value ;rlimit_core = 0 ; Chroot to this directory at the start. This value must be defined as an ; absolute path. When this value is not set, chroot is not used. ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one ; of its subdirectories. If the pool prefix is not set, the global prefix ; will be used instead. ; Note: chrooting is a great security feature and should be used whenever ; possible. However, all PHP paths will be relative to the chroot ; (error_log, sessions.save_path, ...). ; Default Value: not set ;chroot = ; Chdir to this directory at the start. ; Note: relative path can be used. ; Default Value: current directory or / when chroot ;chdir = /var/www ; Redirect worker stdout and stderr into main error log. If not set, stdout and ; stderr will be redirected to /dev/null according to FastCGI specs. ; Note: on highloaded environement, this can cause some delay in the page ; process time (several ms). ; Default Value: no ;catch_workers_output = yes ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from ; the current environment. ; Default Value: clean env ;env[HOSTNAME] = $HOSTNAME ;env[PATH] = /usr/local/bin:/usr/bin:/bin ;env[TMP] = /tmp ;env[TMPDIR] = /tmp ;env[TEMP] = /tmp ; Additional php.ini defines, specific to this pool of workers. These settings ; overwrite the values previously defined in the php.ini. The directives are the ; same as the PHP SAPI: ; php_value/php_flag - you can set classic ini defines which can ; be overwritten from PHP call 'ini_set'. ; php_admin_value/php_admin_flag - these directives won't be overwritten by ; PHP call 'ini_set' ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. ; Defining 'extension' will load the corresponding shared extension from ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not ; overwrite previously defined php.ini values, but will append the new value ; instead. ; Note: path INI options can be relative and will be expanded with the prefix ; (pool, global or /opt/php5) ; Default Value: nothing is defined by default except the values in php.ini and ; specified at startup with the -d argument ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected] ;php_flag[display_errors] = off ;php_admin_value[error_log] = /var/log/fpm-php.www.log ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i

  Read the article

• How to override C# DateTime serialization with class auto-generated from wsdl?

  - by Calvin Fisher

  I have a WSDL that the consumer of my web service expects will be adhered to strictly. I converted it into an interface with wsdl.exe and had my web service implement it. Except for this problem, I have been generally pleased with the results. A simple GetCurrentTime method will have the following response class generated from the WSDL in the interface definition: [System.CodeDobmCompiler.GeneratedCodeAttribute("wsdl", "2.0.50727.3038")] [System.SerializableAttribute()] [System.Diagnostics.DebuggerStepThroughAttribute()] [System.ComponentModel.DesignerCategoryAttribute("code")] [System.Xml.Serialization.XmlTypeAttribute(Namespace="[Client Namespace]")] public partial class GetCurrentTimeResponse { private System.DateTime timeStampField; [System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified] public System.DateTime TimeStamp{ // [accesses timeStampField] } } When I put the response data into the automatically generated response class, it gets serialized into an appropriate XML response. (Most of the web methods have much more complicated return types with multiple levels of arrays.) The problem is that the default serialization of DateTime objects violates one of the requirements in the WSDL: ... <xsd:simpleType name="SearchTimeStamp"> <xsd:restriction base="xsd:dateTime"> <xsd:pattern value="[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}(.[0-9]{1,7})?Z"> </xsd:restriction> </xsd:simpleType> ... Note the last part of the pattern where subseconds must be either 1 or 7 characters if they are included. The client seems to be rejecting the response because it does not match that requirement. The main issue is that when .NET serializes a DateTime object, it omits all trailing zeroes, meaning the resulting subsecond value varies in length. (e.g., "12:34:56.700" gets serialized as "<TimeStamp>12:34:56:7</TimeStamp>" by default). We use millisecond precision, so I need all timestamps to format with 7 subsecond digits in order to be compliant with the WSDL. It would be easy if I could specify a format string, but I'm not sure how to control the string that the DateTime object uses to serialize to XML, or to otherwise override the serialization behavior. How do I do this? Keeping in mind the following... I would like to modify the generated code as little as possible... preferably not at all if the change can be made through a partial class or inherited class. Using an inherited class for the return type of the web method will cause the web service to no longer implement the auto-generated interface. The TimeStamp type occurs in other, more complex response types. So, manually overriding the entire serialization process may be prohibitively time-consuming.

  Read the article

• In Email, Image (img) Source (src) Tags are rewritten as relative links. How to fix?

  - by Noah Goodrich

  I'm working on sending out an html based email, and every time it sends the image src tags and some of the anchor href tags are modified to be relative url's. Update 2: This is happening between when the body of the email is generated and sent and when it arrives in my inbox. Update: I am using Postfix on a LAMPP server. In addition, I am using Zend_Mail to send the emails out. For example, I have a link: src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/header.jpg" And it gets rewritten as: src="../../../../images/email/highpoint_2009_04/header.jpg" What can cause this to occur and how is it corrected? Email headers: Return-Path: <[email protected]> X-Original-To: [email protected] Delivered-To: [email protected] Received: by mail.example.com (Postfix, from userid 0) id 6BF012252; Tue, 14 Apr 2009 12:15:20 -0600 (MDT) To: Gabriel <[email protected]> Subject: Free Map to Sales Success From: Somebody <[email protected]> Date: Tue, 14 Apr 2009 12:15:20 -0600 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: multipart/related Content-Disposition: inline Message-Id: <[email protected]> Original content to be sent out: <table align="center" border="0" cellpadding="0" cellspacing="0" width="600"> <tbody> <tr> <td valign="top"> <a href="http://www.furnituretrainingcompany.com"> <img moz-do-not-send="true" alt="The Furniture Training Company - Know More. Sell More." src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/header.jpg" border="0" height="123" width="600"> </a> </td> </tr> </tbody> </table> <table align="center" border="0" cellpadding="0" cellspacing="0" width="600"> <tbody> <tr> <td valign="top"><img alt="Visit us at High Point to receive your free training poster" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/hero.jpg" moz-do-not-send="true" height="150" width="600"><br> </td> </tr> </tbody> </table> <table align="center" border="0" cellpadding="0" cellspacing="0" width="600"> <tbody> <tr> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer_content_left.jpg" moz-do-not-send="true" height="30" width="30"><br> </td> <td bgcolor="#ffffff" valign="top"><font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" color="#000000" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><big><small><big><b>See you at Market</b></big><br> </small></big></big></big></big></font> <font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" color="#000000" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><big><small><br> </small></big></big></big></big></font><small><font face="Helvetica, Arial, sans-serif">Visit our space to get your free Map to Sales Success poster! This unique 24 X 36 color poster is your guide to developing high volume salespeople with larger tickets. Find us in the new NHFA Retailer Resource Center located in the Plaza. <br> <br> Don&#8217;t miss Mark Lacy&#8217;s entertaining seminar "Help Wanted! My Sales Associates Can&#8217;t Sell Water to a Thirsty Camel." He&#8217;ll reveal powerful secrets for turning sales associates into furniture experts that will sell. See him Saturday, April 25th at 11:30 AM in the seminar room of the new NHFA Retail Resource Center in the Plaza. <br> <br> Stop by our space to learn how our ingenious internet-delivered training courses are easy to use, guaranteed to work, and cheaper than the daily donuts. Over 95% report increased sales. <br> <br> Plan to see us at High Point. </font></small> <font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" color="#000000" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><big><small><small><br> <br> <br> <br> </small></small></big></big></big></big></font><small><font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" color="#000000" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><small> </small></big></big></big></font></small> <a href="http://www.furnituretrainingcompany.com/map"><img alt="Find out more" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/image_content_left.jpg" moz-do-not-send="true" border="0" height="67" width="326"></a><br> <br> </td> <td bgcolor="#ffffff" valign="top"> <img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer_content_middle.jpg" moz-do-not-send="true" height="28" width="28"><br> </td> <td bgcolor="#ffffff" valign="top"><img alt="Roadmap to Sales Success poster" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/image_content_right.jpg" moz-do-not-send="true" height="267" width="186"><br> <font face="Helvetica, Arial, sans-serif"><small><font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" color="#000000" size="1"><big><big><big><small><b>Road Map to Sales Success<br> </b><br> </small></big></big></big></font>This beautiful poster is yours free for simply stopping by and visiting with us at High Point. <span class="moz-txt-slash">Our space is located inside the </span>new NHFA Retailer Resource Center in the Plaza Suites, 222 South Main St, 1st Floor. We will be at market from Sat April 25th until Thur April 30th. </small></font><br> </td> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer_content_right.jpg" moz-do-not-send="true" height="30" width="30"><br> <br> </td> </tr> </tbody> </table> <table align="center" border="0" cellpadding="0" cellspacing="0" width="600"> <tbody> <tr> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/disclaimer_divider.jpg" moz-do-not-send="true" height="25" width="600"><br> </td> </tr> </tbody> </table> <table align="center" border="0" cellpadding="0" cellspacing="0" width="600"> <tbody> <tr> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer_disclaimer_left.jpg" moz-do-not-send="true"></td> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer_disclaimer_middle.jpg" moz-do-not-send="true"><br> <font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" color="#666666" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><big><small><small><small>If you are not attending the High Point market in April but would still like to receive a free Road Map to Sales Success poster visit us on the web at <u><a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="http://www.furnituretrainingcompany.com">www.furnituretrainingcompany.com</a></u>, or to speak with a Furniture Training Company representative, call toll free (866) 755-5996. We do not offer free shipping outside of the U.S. and Canada. Retailers outside of the U.S. and Canada may call for more information. Limit one free Road Map to Sales Success per company. Other copies of the poster may be purchased on our web site.<br> <br> </small></small></small></big></big></big></big></font> <font color="#666666"><small><font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><small><small>We hope you found this message to be useful. However, if you'd rather not receive future emails of this sort from The Furniture Training Company, please <a moz-do-not-send="true" href="http://www.furnituretraining.com/contact">click here to unsubscribe</a>.<br> <br> </small></small></big></big></big></font></small><small><font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><small><small>&copy;Copyright 2009 The Furniture Training Company.<br> 1770 North Research Park Way, <br> North Logan, UT 84341. <br> All Rights Reserved.</small></small></big></big></big></font></small></font><br> </td> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer_disclaimer_right.jpg" moz-do-not-send="true"></td> </tr> </tbody> </table> <table align="center" border="0" cellpadding="0" cellspacing="0" width="600"> <tbody> <tr> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/footer.jpg" moz-do-not-send="true"> </td> </tr> </tbody> </table> <br> <br> Content that gets sent: <table border=3D"0" cellspacing=3D"0" cellpadding=3D"0" width=3D"600" al= ign=3D"center">=0D=0A<tbody>=0D=0A<tr>=0D=0A<td valign=3D"top"><a href= =3D"http://www.furnituretrainingcompany.com"> <img src=3D"http://www.fur= nituretrainingcompany.com/images/email/highpoint_2009_04/header.jpg" bor= der=3D"0" alt=3D"The Furniture Training Company - Know More. Sell More."= width=3D"600" height=3D"123" /> </a></td>=0D=0A</tr>=0D=0A</tbody>=0D= =0A</table>=0D=0A<table border=3D"0" cellspacing=3D"0" cellpadding=3D"0"= width=3D"600" align=3D"center">=0D=0A<tbody>=0D=0A<tr>=0D=0A<td valign= =3D"top"><img src=3D"http://www.furnituretrainingcompany.com/images/emai= l/highpoint_2009_04/hero.jpg" alt=3D"Visit us at High Point to receive y= our free training poster" width=3D"600" height=3D"150" /><br /></td>=0D= =0A</tr>=0D=0A</tbody>=0D=0A</table>=0D=0A<table border=3D"0" cellspacin= g=3D"0" cellpadding=3D"0" width=3D"600" align=3D"center">=0D=0A<tbody>= =0D=0A<tr>=0D=0A<td valign=3D"top" bgcolor=3D"#ffffff"><img src=3D"http:= //www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer= _content_left.jpg" alt=3D"" width=3D"30" height=3D"30" /><br /></td>=0D= =0A<td valign=3D"top" bgcolor=3D"#ffffff"><span style=3D"font-size: xx-s= mall; font-family: Verdana,Arial,Helvetica,sans-serif; color: #000000;">= <big><big><big><big><small><big><strong>See you at Market</strong></big>= <br /> </small></big></big></big></big></span> <span style=3D"font-size:= xx-small; font-family: Verdana,Arial,Helvetica,sans-serif; color: #0000= 00;"><big><big><big><big><small><br /> </small></big></big></big></big><= /span><small><span style=3D"font-family: Helvetica,Arial,sans-serif;">Vi= sit our space to get your free Map to Sales Success poster! This unique= 24 X 36 color poster is your guide to developing high volume salespeopl= e with larger tickets. Find us in the new NHFA Retailer Resource Center= located in the Plaza. <br /> <br /> Don&rsquo;t miss Mark Lacy&rsquo;s= entertaining seminar "Help Wanted! My Sales Associates Can&rsquo;t Sell= Water to a Thirsty Camel." He&rsquo;ll reveal powerful secrets for turn= ing sales associates into furniture experts that will sell. See him Satu= rday, April 25th at 11:30 AM in the seminar room of the new NHFA Retail= Resource Center in the Plaza. <br /> <br /> Stop by our space to learn= how our ingenious internet-delivered training courses are easy to use,= guaranteed to work, and cheaper than the daily donuts. Over 95% report= increased sales. <br /> <br /> Plan to see us at High Point. </span></s= mall> <span style=3D"font-size: xx-small; font-family: Verdana,Arial,Hel= vetica,sans-serif; color: #000000;"><big><big><big><big><small><small><b= r /> <br /> <br /> <br /> </small></small></big></big></big></big></span= ><small><span style=3D"font-size: xx-small; font-family: Verdana,Arial,H= elvetica,sans-serif; color: #000000;"><big><big><big><small> </small></b= ig></big></big></span></small> <a href=3D"http://www.furnituretrainingco= mpany.com/map"><img src=3D"http://www.furnituretrainingcompany.com/image= s/email/highpoint_2009_04/image_content_left.jpg" border=3D"0" alt=3D"Fi= nd out more" width=3D"326" height=3D"67" /></a><br /> <br /></td>=0D=0A<= td valign=3D"top" bgcolor=3D"#ffffff"><img src=3D"http://www.furnituretr= ainingcompany.com/images/email/highpoint_2009_04/spacer_content_middle.j= pg" alt=3D"" width=3D"28" height=3D"28" /><br /></td>=0D=0A<td valign=3D= "top" bgcolor=3D"#ffffff"><img src=3D"http://www.furnituretrainingcompan= y.com/images/email/highpoint_2009_04/image_content_right.jpg" alt=3D"Roa= dmap to Sales Success poster" width=3D"186" height=3D"267" /><br /> <spa= n style=3D"font-family: Helvetica,Arial,sans-serif;"><small><span style= =3D"font-size: xx-small; color: #000000;"><big><big><big><small><strong>= Road Map to Sales Success<br /> </strong><br /> </small></big></big></bi= g></span>This beautiful poster is yours free for simply stopping by and= visiting with us at High Point. <span class=3D"moz-txt-slash">Our space= is located inside the </span>new NHFA Retailer Resource Center in the P= laza Suites, 222 South Main St, 1st Floor. We will be at market from Sat= April 25th until Thur April 30th. </small></span><br /></td>=0D=0A<td v= align=3D"top" bgcolor=3D"#ffffff"><img src=3D"http://www.furnituretraini= ngcompany.com/images/email/highpoint_2009_04/spacer_content_right.jpg" a= lt=3D"" width=3D"30" height=3D"30" /><br /> <br /></td>=0D=0A</tr>=0D=0A= </tbody>=0D=0A</table>=0D=0A<table border=3D"0" cellspacing=3D"0" cellpa= dding=3D"0" width=3D"600" align=3D"center">=0D=0A<tbody>=0D=0A<tr>=0D=0A= <td valign=3D"top" bgcolor=3D"#ffffff"><img src=3D"http://www.furnituret= rainingcompany.com/images/email/highpoint_2009_04/disclaimer_divider.jpg= " alt=3D"" width=3D"600" height=3D"25" /><br /></td>=0D=0A</tr>=0D=0A</t= body>=0D=0A</table>=0D=0A<table border=3D"0" cellspacing=3D"0" cellpaddi= ng=3D"0" width=3D"600" align=3D"center">=0D=0A<tbody>=0D=0A<tr>=0D=0A<td= valign=3D"top" bgcolor=3D"#ffffff"><img src=3D"http://www.furnituretrai= ningcompany.com/images/email/highpoint_2009_04/spacer_disclaimer_left.jp= g" alt=3D"" /></td>=0D=0A<td valign=3D"top" bgcolor=3D"#ffffff"><img src= =3D"http://www.furnituretrainingcompany.com/images/email/highpoint_2009_= 04/spacer_disclaimer_middle.jpg" alt=3D"" /><br /> <span style=3D"font-s= ize: xx-small; font-family: Verdana,Arial,Helvetica,sans-serif; color: #= 666666;"><big><big><big><big><small><small><small>If you are not attendi= ng the High Point market in April but would still like to receive a free= Road Map to Sales Success poster visit us on the web at <span style=3D"= text-decoration: underline;"><a class=3D"moz-txt-link-abbreviated" href= =3D"http://www.furnituretrainingcompany.com">www.furnituretrainingcompan= y.com</a></span>, or to speak with a Furniture Training Company represen= tative, call toll free (866) 755-5996. We do not offer free shipping out= side of the U.S. and Canada. Retailers outside of the U.S. and Canada ma= y call for more information. Limit one free Road Map to Sales Success pe= r company. Other copies of the poster may be purchased on our web site.<= br /> <br /> </small></small></small></big></big></big></big></span> <sp= an style=3D"color: #666666;"><small><span style=3D"font-size: xx-small;= font-family: Verdana,Arial,Helvetica,sans-serif;"><big><big><big><small= ><small>We hope you found this message to be useful. However, if you'd r= ather not receive future emails of this sort from The Furniture Training= Company, please <a href=3D"http://www.furnituretraining.com/contact">cl= ick here to unsubscribe</a>.<br /> <br /> </small></small></big></big></= big></span></small><small><span style=3D"font-size: xx-small; font-famil= y: Verdana,Arial,Helvetica,sans-serif;"><big><big><big><small><small>&co= py;Copyright 2009 The Furniture Training Company.<br /> 1770 North Resea= rch Park Way, <br /> North Logan, UT 84341. <br /> All Rights Reserved.<= /small></small></big></big></big></span></small></span><br /></td>=0D=0A= <td valign=3D"top" bgcolor=3D"#ffffff"><img src=3D"http://www.furnituret= rainingcompany.com/images/email/highpoint_2009_04/spacer_disclaimer_righ= t.jpg" alt=3D"" /></td>=0D=0A</tr>=0D=0A</tbody>=0D=0A</table>=0D=0A<tab= le border=3D"0" cellspacing=3D"0" cellpadding=3D"0" width=3D"600" align= =3D"center">=0D=0A<tbody>=0D=0A<tr>=0D=0A<td valign=3D"top" bgcolor=3D"#= ffffff"><img src=3D"http://www.furnituretrainingcompany.com/images/email= /highpoint_2009_04/footer.jpg" alt=3D"" /></td>=0D=0A</tr>=0D=0A</tbody>= =0D=0A</table>=0D=0A<p><br /></p><br><hr><a href=3D'http://localhost/ftc= /app/unsubscribe.php?action=3DoptOut&pid=3D6121&cid=3D19&email=3Dmarkl@f= urnituretrainingcompany.com'>Click to Unsubscribe</a>

  Read the article

• Unable to rename file with c# ftp methods when current user directory is different from root

  - by Agata

  Hello everyone, Remark: due to spam prevention mechanizm I was forced to replace the beginning of the Uris from ftp:// to ftp. I've got following problem. I have to upload file with C# ftp method and afterwards rename it. Easy, right? :) Ok, let's say my ftp host is like this: ftp.contoso.com and after logging in, current directory is set to: users/name So, what I'm trying to achieve is to log in, upload file to current directory as file.ext.tmp and after upload is successful, rename the file to file.ext The whole difficulty is, as I guess, to properly set the request Uri for FtpWebRequest. MSDN states: The URI may be relative or absolute. If the URI is of the form "ftp://contoso.com/%2fpath" (%2f is an escaped '/'), then the URI is absolute, and the current directory is /path. If, however, the URI is of the form "ftp://contoso.com/path", first the .NET Framework logs into the FTP server (using the user name and password set by the Credentials property), then the current directory is set to UserLoginDirectory/path. Ok, so I upload file with the following URI: ftp.contoso.com/file.ext.tmp Great, the file lands where I wanted it to be: in directory "users/name" Now, I want to rename the file, so I create web request with following Uri: ftp.contoso.com/file.ext.tmp and specify rename to parameter as: file.ext and this gives me 550 error: file not found, no permissions, etc. I traced this in Microsoft Network Monitor and it gave me: Command: RNFR, Rename from CommandParameter: /file.ext.tmp Ftp: Response to Port 53724, '550 File /file.ext.tmp not found' as if it was looking for the file in the root directory - not in the current directory. I renamed the file manually using Total Commander and the only difference was that CommandParameter was without the first slash: CommandParameter: file.ext.tmp I'm able to successfully rename the file by supplying following absolute URI: ftp.contoso.com/%2fusers/%2fname/file.ext.tmp but I don't like this approach, since I would have to know the name of current user's directory. It can probably be done by using WebRequestMethods.Ftp.PrintWorkingDirectory, but it adds extra complexity (calling this method to retrieve directory name, then combining the paths to form proper URI). What I don't understand is why the URI ftp.contoso.com/file.ext.tmp is good for upload and not for rename? Am I missing something here? The project is set to .NET 4.0, coded in Visual Studio 2010.

  Read the article

• Firebug not breaking on errors

  - by stormdrain

  Hi. I reinstalled Firefox today, because... whatever. I reinstalled firebug, therefully, and now when I try to use it, it's all different. I believe it is the same version I had before. In fact, I even went digging through my trash and replaced the new firebug with the one I removed with the old Firefox. They ended up being the same version (1.5.3). My issue is, when I have an error in my script somewhere, it used to be that if on the script pane of firebug, the script would break on the error, and the script page would go to the offending line, highlighted, and all was right with the world. Now, it logs the error in the console, and that's it. I've spent the better part of the last hour trying to convince myself this isn't worth an ulcer; I am losing the battle, though. I've searched Google, put ads on Craigslist, even thought about becoming a cop. There were some examples on the Firebug dox, but none of them helped. A bunch of old references to a mysterious (break on all errors) option; an option which I think I might have set by accident--there is a little red circle-slash on my pause button (that's what she said), but there the script continues, all on its own. There was a guide somewhere on the firebug pages that spoke of setting the breakpoint next to the error in the console. I, however, don't have this option for some reason. The line of code is there in the console, but no breakpoint button next to it. This, however, would not be ideal even if it worked. I liked it when I could have the script page open, and if there were errors it would jump to that line. I could try to fix it, and re-load the page. If that line was fixed, GREAT, on to the next error on the page -- which would be highlighted and ready. I would like to offer a solicitation of help. Help.

  Read the article

• Using will_paginate with AJAX live search with jQuery in Rails

  - by Mark Richman

  I am using will_paginate to successfully page through records. I am also using AJAX live search via jQuery to update my results div. No problem so far. The issue I have is when trying to paginate through those live search results. I simply get "Page is loading..." with no div update. Am I missing something fundamental? # index.html.erb <form id="searchform" accept-charset="utf-8" method="get" action="/search"> Search: <input id="search" name="search" type="text" autocomplete="off" title="Search location, company, description..." /> <%= image_tag("spinner.gif", :id => "spinner", :style =>"display: none;" ) %> </form> # JobsController#search def search if params[:search].nil? @jobs = Job.paginate :page => params[:page], :order => "created_at desc" elsif params[:search] and request.xhr? @jobs = Job.search params[:search], params[:page] end render :partial => "jobs", :layout => false, :locals => { :jobs => @jobs } end # Job#search def self.search(search, page) logger.debug "Job.paginate #{search}, #{page}" paginate :per_page => @@per_page, :page => page, :conditions => ["description LIKE ? or title LIKE ? or company LIKE ?", "%#{search}%", "%#{search}%", "%#{search}%"], :order => 'created_at DESC' end # search.js $(document).ready(function(){ $("#search").keyup(function() { $("#spinner").show(); // show the spinner var form = $(this).parents("form"); // grab the form wrapping the search bar. var url = form.attr("action"); // grab the URL from the form's action value. var formData = form.serialize(); // grab the data in the form $.get(url, formData, function(html) { // perform an AJAX get, the trailing function is what happens on successful get. $("#spinner").hide(); // hide the spinner $("#jobs").html(html); // replace the "results" div with the result of action taken }); }); });

  Read the article

• Oracle JDBC connection exception in Solaris but not Windows?

  - by lupefiasco

  I have some Java code that connects to an Oracle database using DriverManager.getConnection(). It works just fine on my Windows XP machine. However, when running the same code on a Solaris machine, I get the following exception. Both machines can reach the database machine on the network. I have included the Oracle trace logs. Mar 23, 2010 12:12:33 PM org.apache.commons.configuration.ConfigurationUtils locate FINE: ConfigurationUtils.locate(): base is /users/theUser/ADCompare, name is props.txt Mar 23, 2010 12:12:33 PM org.apache.commons.configuration.ConfigurationUtils locate FINE: Loading configuration from the path /users/theUser/ADCompare/props.txt Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver connect FINE: OracleDriver.connect(url=jdbc:oracle:thin:@//theServer:1521/theService, info) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver connect FINER: OracleDriver.connect() walletLocation:(null) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver parseUrl FINER: OracleDriver.parseUrl(url=jdbc:oracle:thin:@//theServer:1521/theService) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver parseUrl FINER: sub_sub_index=12, end=46, next_colon_index=16, user=17, slash=18, at_sign=17 Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver parseUrl FINER: OracleDriver.parseUrl(url):return Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver connect FINER: user=theUser, password=******, database=//theServer:1521/theService, protocol=thin, prefetch=null, batch=null, accumulate batch result =true, remarks=null, synonyms=null Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection <init> FINE: PhysicalConnection.PhysicalConnection(ur="jdbc:oracle:thin:@//theServer:1521/theService", us="theUser", p="******", db="//theServer:1521/theService", info) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection <init> FINEST: PhysicalConnection.PhysicalConnection() : connectionProperties={user=theUser, password=******, protocol=thin} Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection initialize FINE: PhysicalConnection.initialize(ur="jdbc:oracle:thin:@//theServer:1521/theService", us="theUser", access) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection initialize FINE: PhysicalConnection.initialize(ur, us):return Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection needLine FINE: PhysicalConnection.needLine()--no return java.lang.ArrayIndexOutOfBoundsException: 31 at oracle.net.nl.NVTokens.parseTokens(Unknown Source) at oracle.net.nl.NVFactory.createNVPair(Unknown Source) at oracle.net.nl.NLParamParser.addNLPListElement(Unknown Source) at oracle.net.nl.NLParamParser.initializeNlpa(Unknown Source) at oracle.net.nl.NLParamParser.<init>(Unknown Source) at oracle.net.resolver.TNSNamesNamingAdapter.loadFile(Unknown Source) at oracle.net.resolver.TNSNamesNamingAdapter.checkAndReload(Unknown Source) at oracle.net.resolver.TNSNamesNamingAdapter.resolve(Unknown Source) at oracle.net.resolver.NameResolver.resolveName(Unknown Source) at oracle.net.resolver.AddrResolution.resolveAndExecute(Unknown Source) at oracle.net.ns.NSProtocol.establishConnection(Unknown Source) at oracle.net.ns.NSProtocol.connect(Unknown Source) at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1037) at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:282) at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:468) at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165) at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35) at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:839) at java.sql.DriverManager.getConnection(DriverManager.java:582) at java.sql.DriverManager.getConnection(DriverManager.java:185) The above exception is also thrown if I use OracleDataSource instead of the generic DriverManager.getConnection(). Any ideas on why the behavior is different in the different environments?

  Read the article

• How do I use .htaccess RewriteRule to change underscores to dashes

  - by soopadoubled

  I'm working on a site, and its CMS used to save new page urls using the underscore character as a word seperator. Despite the fact that Google now treats underscore as a word seperator, the SEO powers that be are demanding the site use dashes instead. This is very easy to do within the CMS, and I can of course change all existing URLs saved in the MySQL database that serves the CMS. My problem lies in writing a .htaccess rule that will 301 old style underscore seperated links to the new style hyphenated verstion. I had success using the answers to this Stack Overflow question on other sites, using: RewriteRule ^([^_]*)_([^_]*_.*) $1-$2 [N] RewriteRule ^([^_]*)_([^_]*)$ /$1-$2 [L,R=301] However this CMS site uses a lot of existing rules to produce clean URLs, and I can't get this working in conjunction with the existing rule set. .htaccess currently looks like this: Options FollowSymLinks # RewriteOptions MaxRedirects=50 RewriteEngine On RewriteBase / RewriteCond %{HTTP_HOST} !^www\.mydomain\.co\.uk$ [NC] RewriteRule (.*) http://www.mydomain.co.uk/$1 [R=301,L] #trailing slash enforcement RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_URI} !# RewriteCond %{REQUEST_URI} !(.*)/$ RewriteRule ^(.*)$ http://www.mydomain.co.uk/$1/ [L,R=301] RewriteRule ^test/([0-9]+)(/)?$ test_htaccess.php?year=$1 [nc] RewriteRule ^index(/)?$ index.php RewriteRule ^department/([^/]*)/([^/]*)/([^/]*)(/)?$ ecom/index.php?action=ecom.details&mode=$1&$2=$3 [nc] RewriteRule ^department/([^/]*)(/)?$ ecom/index.php?action=ecom.details&mode=$1 [nc] RewriteRule ^product/([^/]*)/([^/]*)/([^/]*)(/)?$ ecom/index.php?action=ecom.pdetails&mode=$1&$2=$3 [nc] RewriteRule ^product/([^/]*)(/)?$ ecom/index.php?action=ecom.pdetails&mode=$1 [nc] RewriteRule ^content/([^/]*)(/)?$ ecom/index.php?action=ecom.cdetails&mode=$1 [nc] RewriteRule ([^/]*)/action/([^/]*)/([^/]*)/([^/]*)/([^/]*)(/)?$ $1/index.php?action=$2&mode=$3&$4=$5 [nc] RewriteRule ([^/]*)/action/([^/]*)/([^/]*)(/)?$ $1/index.php?action=$2&mode=$3 [nc] RewriteRule ([^/]*)/action/([^/]*)(/)?$ $1/index.php?action=$2 [nc] RewriteRule ^eaction/([^/]*)/([^/]*)/([^/]*)/([^/]*)(/)?$ ecom/index.php?action=$1&mode=$2&$3=$4 [nc] RewriteRule ^eaction/([^/]*)/([^/]*)(/)?$ ecom/index.php?action=$1&mode=$2 [nc] RewriteRule ^action/([^/]*)/([^/]*)(/)?$ index.php?action=$1&mode=$2 [nc] RewriteRule ^sid/([^/]*)(/)?$ index.php?sid=$1 [nc] ## Error Handling ## #RewriteRule ^error/([^/]*)(/)?$ index.php?action=error&mode=$1 [nc] # ----------------------------------- Content Section ------------------------------ # #RewriteRule ^([^/]*)(/)?$ index.php?action=cms&mode=$1 [nc] RewriteRule ^accessibility(/)?$ index.php?action=cms&mode=accessibility RewriteRule ^terms(/)?$ index.php?action=cms&mode=conditions RewriteRule ^privacy(/)?$ index.php?action=cms&mode=privacy RewriteRule ^memberpoints(/)?$ index.php?action=cms&mode=member_points RewriteRule ^contactus(/)?$ index.php?action=contactus RewriteRule ^sitemap(/)?$ index.php?action=sitemap ErrorDocument 404 /index.php?action=error&mode=content ExpiresDefault "access plus 3 days" All page URLS are in one of the 3 following formats: http://www.mydomain.com/department/some_page_address/ http://www.mydomain.com/product/some_page_address/ http://www.mydomain.com/content/some_page_address/ I'm sure I am missing something obvious, but at this level my regex and mod_rewrite skills clearly aren't up to par. Any ideas would be greatly appreciated!

  Read the article

• trouble with utf-8 chars & apache2 rewrite rules

  - by tixrus

  I see the post http://stackoverflow.com/questions/2565864/validating-utf-8-in-htaccess-rewrite-rule and I think that is great, but a more fundamental problem I am having first: I needed to expand to handle utf-8 chars for query string parameters, names of directories, files, and used in displays to users etc. I configured my Apache with DefaultCharset utf-8 and also my php if that matters. My original rewrite rule filtered everything except regular A-Za-z and underscore and hyphen. and it worked. Anything else would give you a 404 (which is what I want!) Now, however it seems that everything matches, including stuff I don't want, however, although it seems to match it doesn't go in the query string unless it is a regular A-Za-z_- character string. I find this confusing, because the rule says put whatever you matched into the query string: Here is the original rule: RewriteRule ^/puzzle/([A-Za-z_-]+)$ /puzzle.php?g=$1 [NC] and here is the revised rule: RewriteRule ^/puzzle/(\w+)$ /puzzle.php?g=$1 [NC] I made the change because somewhere I read that \w matches ALL the alpha chars where as A-Zetc. only matches the ones without accents and stuff. It doesn't seem to matter which of those rules I use: Here is what happens: In the application I have this: echo $_GET['g']; If I feed it a url like http://mydomain.com/puzzle/USA it echoes out "USA" and works fine. If I feed it a url like http://mydomain.com/puzzle/México it echoes nothing for that and warns me that index g is not defined and of course doesn't get resources for Mexico. if I feed it a url like http://mydomain.com/puzzle/fuzzle/buzzle/j.qle it does the same thing. This last case should be a 404! And it does this no matter which of the above rules I use. I configured a rewrite log RewriteLogLevel 5 RewriteLog /opt/local/apache2/logs/puzzles.httpd.rewrite but it is empty. Here is from the regular access log (it gives a status of 200) [26/May/2010:11:21:42 -0700] "GET /puzzle/M%C3%A9xico HTTP/1.1" 200 342 [26/May/2010:11:21:54 -0700] "GET /puzzle/M/l.foo HTTP/1.1" 200 342 What can I do to get these $%#$@(*#@!!! characters but not slash, dot or other non-alpha into my program, and once there, will it decode them correctly??? Would posix char classes work any better? Is there anything else I need to configure?

  Read the article

• Regular exp to validate email in C

  - by Liju Mathew

  Hi, We need to write a email validation program in C. We are planning to use GNU Cregex.h) regular expression. The regular expression we prepared is [a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*@(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9])? But the below code is failing while compiling the regex. #include <stdio.h> #include <regex.h> int main(const char *argv, int argc) { const char *reg_exp = "[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*@(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9])?"; int status = 1; char email[71]; regex_t preg; int rc; printf("The regex = %s\n", reg_exp); rc = regcomp(&preg, reg_exp, REG_EXTENDED|REG_NOSUB); if (rc != 0) { if (rc == REG_BADPAT || rc == REG_ECOLLATE) fprintf(stderr, "Bad Regex/Collate\n"); if (rc == REG_ECTYPE) fprintf(stderr, "Invalid Char\n"); if (rc == REG_EESCAPE) fprintf(stderr, "Trailing \\\n"); if (rc == REG_ESUBREG || rc == REG_EBRACK) fprintf(stderr, "Invalid number/[] error\n"); if (rc == REG_EPAREN || rc == REG_EBRACE) fprintf(stderr, "Paren/Bracket error\n"); if (rc == REG_BADBR || rc == REG_ERANGE) fprintf(stderr, "{} content invalid/Invalid endpoint\n"); if (rc == REG_ESPACE) fprintf(stderr, "Memory error\n"); if (rc == REG_BADRPT) fprintf(stderr, "Invalid regex\n"); fprintf(stderr, "%s: Failed to compile the regular expression:%d\n", __func__, rc); return 1; } while (status) { fgets(email, sizeof(email), stdin); status = email[0]-48; rc = regexec(&preg, email, (size_t)0, NULL, 0); if (rc == 0) { fprintf(stderr, "%s: The regular expression is a match\n", __func__); } else { fprintf(stderr, "%s: The regular expression is not a match: %d\n", __func__, rc); } } regfree(&preg); return 0; } The regex compilation is failing with the below error. The regex = [a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*@(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9])? Invalid regex main: Failed to compile the regular expression:13 What is the cause of this error? Whether the regex need to be modified? Thanks, Mathew Liju

  Read the article

• .htaccess mod_rewrite issue

  - by Orhan Toy

  Almost in any project I work on, some issues with .htaccess occur. I usually just find the easiest solution and leave it because I don't have any knowledge or understanding for Apache, servers etc. But this time I thought I would ask you guys. This is the files and folders in my (simplified) setup: /modrewrite-test .htaccess /config /inc /lib /public_html .htaccess /cms /navigation index.php edit.php /pages index.php edit.php login.php page.php The "config", "inc" and "lib" folders are meant to be "hidden" from the root of the website. I try to accomplish this by making a .htaccess-file in the root that redirects the user to "public_html". The .htacess-file contains this: RewriteEngine On RewriteRule (.*) public_html/$1 This works perfect. If I type "http://localhost/modrewrite-test/login.php" in my browser, I end up in public_html/login.php which is my intention. So this works fine. The .htaccess-file in "public_html" contains this: RewriteEngine On # Root RewriteRule ^$ page.php [L] # Login RewriteRule ^(admin)|(login)\/?$ login.php [L] # Page (if not a file/directory) RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ page.php?url=$1 [L] The first rewrite just redirects me to public_html/page.php if I try to reach "http://localhost/modrewrite-test/". The next rewrite is just for the convenience of users trying to log in - so if they try to reach "http://localhost/modrewrite-test/admin" or "http://localhost/modrewrite-test/login" they will end up at the login.php-file. The third and last rewrite handles the rest of the requests. If I try to reach "http://localhost/modrewrite-test/bla/bla/bla" it will just redirect me to public_html/page.php (with the 'url' GET-variable set) instead of finding a folder called "la", containing a folder named "bla" and etc. All of these things work perfect but a minor issues occurs when I for instance try to reach "http://localhost/modrewrite-test/cms/navigation" without a slash at the end of the URL. When I try to reach that page the browser is somehow redirected to "http://localhost/modrewrite-test/public_html/cms/navigation/". The correct page is shown but why does it get redirected and add the "public_html" part in the URL? The desired behavior is that the URL stays intact and that the page public_html/cms/navigation/index.php is shown. The files and folders in the (simplified) can be found at http://highbars.com/modrewrite-test.zip

  Read the article

• How can I make my Perl Jabber bot an event-driven program?

  - by TheGNUGuy

  I'm trying to make a Jabber bot and I am having trouble keeping it running while waiting for messages. How do I get my script to continuously run? I have tried calling a subroutine that has a while loop that I, in theory, have set up to check for any messages and react accordingly but my script isn't behaving that way. Here is my source: http://pastebin.com/03Habbvh # set jabber bot callbacks $jabberBot-SetMessageCallBacks(chat=\&chat); $jabberBot-SetPresenceCallBacks(available=\&welcome,unavailable=\&killBot); $jabberBot-SetCallBacks(receive=\&prnt,iq=\&gotIQ); $jabberBot-PresenceSend(type="available"); $jabberBot-Process(1); sub welcome { print "Welcome!\n"; $jabberBot-MessageSend(to=$jbrBoss-GetJID(),subject="",body="Hello There!",type="chat",priority=10); &keepItGoing; } sub prnt { print $_[1]."\n"; } #$jabberBot-MessageSend(to=$jbrBoss-GetJID(),subject="",body="Hello There! Global...",type="chat",priority=10); #$jabberBot-Process(5); #&keepItGoing; sub chat { my ($sessionID,$msg) = @_; $dump-pl2xml($msg); if($msg-GetType() ne 'get' && $msg-GetType() ne 'set' && $msg-GetType() ne '') { my $jbrCmd = &trimSpaces($msg-GetBody()); my $dbQry = $dbh-prepare("SELECT command,acknowledgement FROM commands WHERE message = '".lc($jbrCmd)."'"); $dbQry-execute(); if($dbQry-rows() 0 && $jbrCmd !~ /^insert/si) { my $ref = $dbQry-fetchrow_hashref(); $dbQry-finish(); $jabberBot-MessageSend(to=$msg-GetFrom(),subject="",body=$ref-{'acknowledgement'},type="chat",priority=10); eval $ref-{'command'}; &keepItGoing; } else { $jabberBot-MessageSend(to=$msg-GetFrom(),subject="",body="I didn't understand you!",type="chat",priority=10); $dbQry-finish(); &keepItGoing; } } } sub gotIQ { print "iq\n"; } sub trimSpaces { my $string = $_[0]; $string =~ s/^\s+//; #remove leading spaces $string =~ s/\s+$//; #remove trailing spaces return $string; } sub keepItGoing { print "keepItGoing!\n"; my $proc = $jabberBot-Process(1); while(defined($proc) && $proc != 1) { $proc = $jabberBot-Process(1); } } sub killBot { print "killing\n"; $jabberBot-MessageSend(to=$_[0]-GetFrom(),subject="",body="Logging Out!",type="chat",priority=10); $jabberBot-Process(1); $jabberBot-Disconnect(); exit; }

  Read the article

• Using PHP to read a web page with fsockopen(), but fgets is not working

  - by asdasd

  Im using this code here: http://www.digiways.com/articles/php/httpredirects/ public function ReadHttpFile($strUrl, $iHttpRedirectMaxRecursiveCalls = 5) { // parsing the url getting web server name/IP, path and port. $url = parse_url($strUrl); // setting path to '/' if not present in $strUrl if (isset($url['path']) === false) $url['path'] = '/'; // setting port to default HTTP server port 80 if (isset($url['port']) === false) $url['port'] = 80; // connecting to the server] // reseting class data $this->success = false; unset($this->strFile); unset($this->aHeaderLines); $this->strLocation = $strUrl; $fp = fsockopen ($url['host'], $url['port'], $errno, $errstr, 30); // Return if the socket was not open $this-success is set to false. if (!$fp) return; $header = 'GET / HTTP/1.1\r\n'; $header .= 'Host: '.$url['host'].$url['path']; if (isset($url['query'])) $header .= '?'.$url['query']; $header .= '\r\n'; $header .= 'Connection: Close\r\n\r\n'; // sending the request to the server echo "Header is: ".str_replace('\n', '\n', $header).""; $length = strlen($header); if($length != fwrite($fp, $header, $length)) { echo 'error writing to header, exiting'; return; } // $bHeader is set to true while we receive the HTTP header // and after the empty line (end of HTTP header) it's set to false. $bHeader = true; // continuing untill there's no more text to read from the socket while (!feof($fp)) { echo "in loop"; // reading a line of text from the socket // not more than 8192 symbols. $good = $strLine = fgets($fp, 128); if(!$good) { echo 'bad'; return; } // removing trailing \n and \r characters. $strLine = ereg_replace('[\r\n]', '', $strLine); if ($bHeader == false) $this-strFile .= $strLine.'\n'; else $this-aHeaderLines[] = trim($strLine); if (strlen($strLine) == 0) $bHeader = false; echo "read: $strLine"; return; } echo "after loop"; fclose ($fp); } This is all I get: Header is: GET / HTTP/1.1\r\n Host: www.google.com/\r\n Connection: Close\r\n\r\n in loopbad So it fails the fgets($fp, 128);

  Read the article

• How to configure the framesize using AudioUnit.framework on iOS

  - by Piperoman

  I have an audio app i need to capture mic samples to encode into mp3 with ffmpeg First configure the audio: /** * We need to specifie our format on which we want to work. * We use Linear PCM cause its uncompressed and we work on raw data. * for more informations check. * * We want 16 bits, 2 bytes (short bytes) per packet/frames at 8khz */ AudioStreamBasicDescription audioFormat; audioFormat.mSampleRate = SAMPLE_RATE; audioFormat.mFormatID = kAudioFormatLinearPCM; audioFormat.mFormatFlags = kAudioFormatFlagIsPacked | kAudioFormatFlagIsSignedInteger; audioFormat.mFramesPerPacket = 1; audioFormat.mChannelsPerFrame = 1; audioFormat.mBitsPerChannel = audioFormat.mChannelsPerFrame*sizeof(SInt16)*8; audioFormat.mBytesPerPacket = audioFormat.mChannelsPerFrame*sizeof(SInt16); audioFormat.mBytesPerFrame = audioFormat.mChannelsPerFrame*sizeof(SInt16); The recording callback is: static OSStatus recordingCallback(void *inRefCon, AudioUnitRenderActionFlags *ioActionFlags, const AudioTimeStamp *inTimeStamp, UInt32 inBusNumber, UInt32 inNumberFrames, AudioBufferList *ioData) { NSLog(@"Log record: %lu", inBusNumber); NSLog(@"Log record: %lu", inNumberFrames); NSLog(@"Log record: %lu", (UInt32)inTimeStamp); // the data gets rendered here AudioBuffer buffer; // a variable where we check the status OSStatus status; /** This is the reference to the object who owns the callback. */ AudioProcessor *audioProcessor = (__bridge AudioProcessor*) inRefCon; /** on this point we define the number of channels, which is mono for the iphone. the number of frames is usally 512 or 1024. */ buffer.mDataByteSize = inNumberFrames * sizeof(SInt16); // sample size buffer.mNumberChannels = 1; // one channel buffer.mData = malloc( inNumberFrames * sizeof(SInt16) ); // buffer size // we put our buffer into a bufferlist array for rendering AudioBufferList bufferList; bufferList.mNumberBuffers = 1; bufferList.mBuffers[0] = buffer; // render input and check for error status = AudioUnitRender([audioProcessor audioUnit], ioActionFlags, inTimeStamp, inBusNumber, inNumberFrames, &bufferList); [audioProcessor hasError:status:__FILE__:__LINE__]; // process the bufferlist in the audio processor [audioProcessor processBuffer:&bufferList]; // clean up the buffer free(bufferList.mBuffers[0].mData); //NSLog(@"RECORD"); return noErr; } With data: inBusNumber = 1 inNumberFrames = 1024 inTimeStamp = 80444304 // All the time same inTimeStamp, this is strange However, the framesize that i need to encode mp3 is 1152. How can i configure it? If i do buffering, that implies a delay, but i would like to avoid this because is a real time app. If i use this configuration, each buffer i get trash trailing samples, 1152 - 1024 = 128 bad samples. All samples are SInt16.

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29  | Next Page >