Search Results

Search found 25098 results on 1004 pages for 'usb network adapter'.

Page 26/1004 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • Virtual PC network connection setting issue

    - by George2
    Hello everyone, I am using Virtual PC 2007 on Windows Vista Enterprise x86. My confusion is about the network setting for guest OS. In the network setting, I can set the network adaptor of guest OS to one of my physical network adaptors of my host OS (I have tested that it works for guest OS to use the physical network adaptor of host OS to access external network). But in this way, 1. since both host OS and guest OS will use the same physical network adaptor, will there be any conflicts (e.g. same H/W serves two OS)? 2. will guest OS share a part of network bandwidth of the host OS of the physical network adaptor? 3. What means NAT setting in guest OS network connection adaptor? thanks in advance, George

    Read the article

  • USB connection is unstable with Nexus S 2.3.4 on AMD 64 running 64-bit Windows 7, but works with 32-bit Windows Vista

    - by Mike
    The USB connection is unstable with Nexus S (Android 2.3.4) on AMD 64 running 64-bit Windows 7, but it works with 32-bit Windows Vista. Problem Description: On the 64-bit Windows 7 machine my Nexus S appears to connect, but then it disconnects moments later. Neither accessing USB storage or loading an Android application package file (APK) using the Android Debug Bridge (ADB) work. On 32-bit Windows Vista using the same USB cable, USB storage works. I haven't tried the ADB on 32-bit Windows Vista. Reproduction steps for USB storage: (I have provided the reproduction steps for USB storage and not ADB, because if one isn't working, then the other isn't working either and the USB storage reproduction steps are shorter to document.) Connect the USB cable to the Nexus S and my Windows 7 machine. Effect: The "USB Mass Storage, USB Connected" dialog appears with the button "Turn on USB storage." Click "Turn on USB Storage" Effect: The "working circle" appears. A dialog briefly appears saying "USB storage in use," then it either returns me to Step 1 (now that I am running 2.3.4) or is replaced with the Nexus S's application homepage (while I was running 2.3.3). I'm not sure if the version matters, but I mention it for completeness. On the 32-bit Windows Vista machine the connection is stable. I am able to navigate through the Nexus S file system create, read, update, and delete files, etc. I haven't tried connecting with the ADB. Troubleshooting summary: Tried and failed: Uninstalling and reinstalling the Android USB drivers including removing the files. Uninstalling my custom software Pulling the Nexus S's battery Restarting the Nexus S Restarting 64-bit Windows 7 Changing USB ports on the 64-bit Windows 7 box Compared the dates and file size on the DLLs in my google-usb_driver\amd64 directory and the windows\System32 directory. They match. The sizes for the google-usb_driver\i386 directory do not match (expected). Turning off Debugging mode on the Nexus S does not resolve the problem. Searching Google. Tried and succeeded: Connecting to another machine (Windows Vista) using the same USB cable and Nexus S phone. Troubleshooting observations: I notice that uninstalling the device drivers and deleting the files, then reinstalling the drivers, then rebooting 64-bit Windows 7 then unplugging the Nexus S, then plugging it back in occasionally helps for a short amount of time (minutes to hours, not days). When it is working, I can both access the Nexus S's drive and load/test applications using the ADB. I have observed some wonky behavior in the Device Manager that I haven't tracked down. Sometimes the black Nexus S image appears in the list of devices. Sometimes the image displays as a computer with a green ISA card. Sometimes it neither appears on the top level of devices nor under “other devices,” but it does appear under "disk drives" as "Android UMS Composite USB Device." System configuration: The Nexus S is running Android OS 2.3.4's "Settings\about phone\System updates" indicates that it is up to date as of May 21st 2011. Both 32-bit Windows Vista and 64-bit Windows 7 are up to date. The Windows Vista system is running on an Intel 32-bit processor. Windows 7 is running on an AMD 64-bit processor. I have done Android development on both systems, but I usually develop on the 64-bit Windows 7 machine.

    Read the article

  • Building a Mac/PC Network in a Dorm with Network Restrictions

    - by user70340
    I have been a Windows XP user for the last few years, but I recently bought a 15'' MacBook Pro for research purposes. I would like to set up a no-hassle Mac/PC Network at home so that I can access the internet on both computers and hardware between computers (i.e. a harddrive, or a mouse/keyboard with Synergy). Unfortunately, I live in a dorm with silly network restrictions so a solution is not straightforward. In particular: The dorm has a wired and wireless network, both which provide an internet connection. The wired network provides way faster internet (download speeds of 15 MB/s vs. 2 MB/s on wireless), so I would like to somehow exploit this, at least on my PC for Bittorrent :) Multiple devices can connect to the wireless network, but cannot "see" each other on the network (so software like Synergy would not work). Only 1 MAC address can connect to the wired network at a time. Ideally I would just connect a wireless router to the wired network and then have both the Mac and the PC on that, but the 1 MAC address restriction will not allow the both computer to access the internet simultaneously. I cannot think of a way to bypass this restriction (though I'm not network savvy), so I am planning to create a private no-internet network to allow the devices to see each other and share hardware. Here are some thoughts. I would appreciate any feedback at all! If I build a private wireless network: (first choice) I will use a wireless router that is not connected to the internet. My PC and Mac will be connected to each other wirelessly. I can then connect the PC to the internet via a wired network, but then the Mac will not have internet access as its wireless card is already in use. In this case, could I stream internet access from the PC to the Mac via the wireless network? Or could I buy a USB wireless card for the Mac so that it can connect to both my private network and the dorm network? If I build a private wired network: (second choice) Then both the PC and the Mac will connect to the internet wirelessly, which means I cannot take advantage of the faster download speeds.

    Read the article

  • Map /dev/bus/usb node to /sys node on Linux

    - by Cody Brocious
    I'm using libusb to find and access a USB device, but once I get the information I need from there, I need to map it to a /sys node. This could be to the actual USB bus it's on, the /sys/bus/usb-serial node (which is where I'm going to get eventually), or effectively anywhere else since I can walk the tree from there. I can get to a /dev/bus/usb node easily enough, but I'm a bit lost from there. What would be the best route to perform this mapping? Alternatively, a way to get the /dev/ttyUSB device node for a /dev/bus/usb node would work as well, since it gets me the same result.

    Read the article

  • Booting from a USB drive that was originally a boot drive

    - by daveh551
    When Win 7 went RTM, I upgraded my laptop from XP. But to protect myself against the possibility of having data inaccessible, I got a new disk and put it in the laptop, and took the old (XP) disk and put it in a USB enclosure. I have no trouble accessing the data on the USB drive under Windows 7. But I would like to be able to plug it in, tell the BIOS to boot from the USB drive, and be back on my old machine. The laptop is a Dell Precision M90, and it has a boot from USB option in its boot menu. But when I try to do that, it does read the drive, gets as far as putting up the Windows XP splash screen and starting the boot progress bar, and then reboots. What do I need to do to the old disk now running on USB to allow the machine to boot from it?

    Read the article

  • Use Network-Manager to Connect to a wifi Access Point on the command-line

    - by Stefano Palazzo
    I'd like to connect to a wireless access point from the command-line. ideally, I'd only need the name of the AP. But the hardware-address would work as well. I know I can use nmcli to connect to a managed network connection, but in my case, the access point may not be configured for Network-Manager yet (See the difference between the output of nm-tool and nmcli con). Example output of nmcli: Auto pwln 3a3d62b1-bbdf-4f76-b4d2-c211fd5cfb03 802-11-wireless [...] Wired Network aa586921-accf-4932-98c4-c873c310f08e 802-3-ethernet [...] Cisco-UDP Uni 7f94847b-04dc-40b7-9955-5246fb77cc65 vpn [...] T-mobile (D1) 867f345a-cbbf-4bd4-b883-a5e5ae0932f0 gsm [...] Example output of nm-tool: State: connected - Device: eth1 [Auto pwln] ---------------------------------------------------- [...] Wireless Access Points (* = current AP) *pwln: Infra, [...], Freq 2472 MHz, Rate 54 Mb/s, Strength 80 WPA WPA2 WLAN: Infra, [...], Freq 2422 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 [...] How do I connect to an access point that may or may not be known to NM? Extra: Finding out if the connection needs a pass-phrase, and submitting it on the command-line as well would be great too (that is to say It'd be nice if network-manager wouldn't pop open any keyring dialogues or errors on the gui)

    Read the article

  • Can't connect to hidden network with BCM4313

    - by poomerang
    The wireless works fine with all the other wi-fi nets I have tried, the only problem is with this hidden network. I should add it's the only hidden network I've tried, so I am not sure if the problem is it being hidden or somethings else, but I've checked the settings of NetworkManager against another Ubuntu system (which can connect) and they appear to be the same, passphrase included. The network is using WPA2 Personal with AES encryption, I don't know how to check this setting but I believe it's the usual for WPA2, and therefore usually not a problem. Also, I can connect through ethernet, which should exclude any blacklisting of my device, I believe. I usually use brcmsmac drivers, I've tried also STA but the result is the same. I've also tried the suggestion from Unable to connect to hidden SSID with no luck output of lspci -v is 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Askey Computer Corp. Device 7175 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d4000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac

    Read the article

  • usb device in dual mode on gentoo linux

    - by Idlecool
    i am having a flip flop usb modem which has two modes 1 usb mass storage mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fff5 ONDA Communication S.p.A. 2 usbserial mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fffe ONDA Communication S.p.A. by default whenever i plug the modem to the usb port.. the linux machine recognize it as a usb mass storage device.. how can i make it load as usbserial device i have been using a package usb_modeswitch in the past on ubuntu 10.04 but i cannt install the same package on gentoo live cd.. even udev is not installed on live cd.. how to change the product-id of the usb device on gentoo live disc without udev.

    Read the article

  • "Enable Wireless" option is disabled in network settings

    - by silenTK
    I'm using Ubuntu 11.10 (dual booted with Windows 7) but I'm unable to access Internet wireless even though I can do so on Windows 7. The output for rfkill list all is given below: rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no The output for sudo lshw -C network *-network DISABLED is: description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: 11:11:11:11:11:11 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:16 memory:c2500000-c2503fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: 22:22:22:22:22:22 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff Broadcom STA wireless driver is installed, activated, and currently in use. My laptop is a HP-Pavilion-g6-1004tx. My hardware switch is on. Enable Wireless option is also disabled in network settings.

    Read the article

  • Adding a new USB port inside a Macbook Pro

    - by MikeC8
    I have a USB Dongle that I'd like to put inside my Macbook Pro. I have already found a spot that will fit the dongle. The next question is splicing one of the USB ports and connecting it to the dongle. Here's a photograph of the inside of my Macbook Pro, showing the USB ports and a little gray plastic divider with four holes in it above each port. http://min.us/mvoQEem My question: Does anyone know what is inside these holes? Presumably each one is a pin for the USB port, right? Can I just stick a wire in there, giving me 4 pins, plus the fifth attached to the metal outside the port? More generally, any one have any ideas for what might be the easiest way to get a USB port inside my MBP? :) Thanks!

    Read the article

  • Actual High Speed USB flash drive

    - by CSkau
    I'm looking to upgrade my EEE 1000H by possibly replacing the HDD with simple (internal) usb connected storage. The problem I'm having now is that I can't seem to find any actual high speed usb sticks. They all proclaim high speeds, but usually turn out to be ~30 mb/s - much lower than the 60 mb/s (480 mbit/s / 8 ) I understand USB 2.0 is at - no ? Can anyone enlighten me as to why no USB sticks seem to go past that low bar or alternatively point me in the direction of some actual high speed usb sticks ? Any help is greatly appreciated :) Cheers!

    Read the article

  • USB keyboard not recognized by motherboard with only a legacy PS/2 header

    - by Luis
    I've bought a D945GSEJT Atom motheboard that has three usb ports available and no PS/2 connector, just a PS/2 header. I have a PS/2 keyboard with a PS/2 to USB adapter and connected it to a USB port. I tried all three USB ports. The problem is that the board seems to not recognize my keyboard. None of the keys I press are detected by the system. I've read that maybe I could try to change BIOS USB settings to solve this detection problem. But how can I do it if I can't type anything? Is there any other option other than buying a PS/2 adapter and plug it to the PS/2 header?

    Read the article

  • Syncing Large Directories/Filesystems using USB Drive [closed]

    - by Alan Lue
    Does anyone have a solution for syncing large directories/filesystems using just a USB flash drive (and specifically without using a network connection)? The objective is simply to sync a user directory between two computers. The contents of the user directory could amount to a large quantity of data—say, a quantity larger than could be stored on any single USB drive—but the aggregate size of changes that must be propagated by a single sync could easily fit on a USB drive. As an example, suppose a user directory is already synchronized between a desktop and a laptop computer. Here's a use case: Some changes are made in the user directory on the desktop. We mount a USB drive onto the desktop and copy whatever changes need to be applied to the laptop user directory in order to synchronize the desktop and laptop user directories. We now mount the USB drive onto the laptop and apply the changes. The desktop and laptop user directories are now synchronized. Any ideas? Alan

    Read the article

  • USB hardwares driver installation

    - by unknown (google)
    I am using few USB hardwares like camera and scanners with my software application. I plugged my hardware in USB A installed the drivers and the device was working properly. Now I tried to connect the same hardware in USB B (ie, some other USB port), and again it is asking for the driver installation. I need to know the reason behind this. Is it something to do with the particular device or system? Anywork around for this during the first time driver installation? Please anyone explain me how the USB works physical address, how it is assigned and how the driver for a device getting installed. Thanks in advance.

    Read the article

  • Syncing Large Directories/Filesystems using USB Drive

    - by Alan Lue
    Does anyone have a solution for syncing large directories/filesystems using just a USB flash drive (and specifically without using a network connection)? The objective is simply to sync a user directory between two computers. The contents of the user directory could amount to a large quantity of data—say, a quantity larger than could be stored on any single USB drive—but the aggregate size of changes that must be propagated by a single sync could easily fit on a USB drive. As an example, suppose a user directory is already synchronized between a desktop and a laptop computer. Here's a use case: Some changes are made in the user directory on the desktop. We mount a USB drive onto the desktop and copy whatever changes need to be applied to the laptop user directory in order to synchronize the desktop and laptop user directories. We now mount the USB drive onto the laptop and apply the changes. The desktop and laptop user directories are now synchronized. Any ideas? Alan

    Read the article

  • Ubuntu 12.04 on Vm Player showing Wired Network Instead of Wireless Network

    - by Fak365
    I am new to Ubuntu, recently I installed ubuntu 12.04 in Vm Player (Virtual Machine) on my Dell laptop having windows 7 ultimate 32 bit for just to check the security of my wireless network and want to crack the WiFi (WPA-PSK) password but in ubuntu it does not show the wireless network it shows the 2 arrow sign as i have not connect the ethernet cable to my laptop and connected through WiFi on my main OS (windows 7) but it shows the wired network and internet is working but it does not show wifi connection. On windows 7 WiFi is connected and showing the WiFi connection and working correctly.But my main motive is to crack the WiFi password as it can't detect WiFi network so what to do? Please Help.!!thanks My Laptop Specification : Laptop : Dell Latitude D620 OS : Windows 7 Ultimate 32 bit Processor : Core Duo 2 T7200 @ 2Ghz Ram : 2 GB WiFi card : Intel Pro/Wireless 3945 ABG Virtual Machine : Vm Player V 5.0.1 If Need to Install Drivers Please Give Me Full Information how to install and which driver I should install. Thanks In Advance.

    Read the article

  • Cannot turn on "Network Discovery and File Sharing" when Windows Firewall is enabled

    - by Cheeso
    I have a problem similar to this one. Windows Firewall prevents File and Printer sharing from working and Why does File and Printer Sharing keep turning off in Windows 7? I cannot turn on Network Discovery. This is Windows 7 Home Premium, x64. It's a Dell XPS 1340 and Windows came installed from the OEM. This used to work. Now it doesn't. I don't know what has changed. In windows Explorer, the UI looks like this: When I click the yellow panel that says "Click to change...", the panel disappears, then immediately reappears, with exactly the same text. If I go through the control panel "Network and Sharing Center" thing, the UI looks like this: If I tick the box to "turn on network discovery", the "Save Changes" button becomes enabled. If I then click that button, the dialog box just closes, with no message or confirmation. Re-opening the same dialog box shows that Network Discovery has not been turned on. If I turn off Windows Firewall, I can then turn on Network Discovery via either method. The machine is connected to a wireless home network, via a router. The network is marked as "Home Network" in the Network and Sharing Center, which I think corresponds to the "Private" profile in Windows Firewall Advanced Settings app. (Confirm?) The PC is not part of a domain, and has never been part of a domain. The machine is not bridging any networks. There is a regular 100baseT connector but I have the network adapter for that disabled in Windows. Something else that seems odd. Within Windows Firewall Advanced Settings, there are no predefined rules available. If I click the "New Rule...." Action on the action pane, the "Predefined" option is greyed out. like this: In order to attempt to allow the network discovery protocols through on the private network, I hand-coded a bunch of rules, intending to allow the necessary UPnP and WDP protocols supporting network discovery. I copied them from a working Windows 7 Ultimate PC, running on the same network. This did not work. Even with the hand-coded rules, I still cannot turn on Network Discovery. I looked on the interwebs, and the only solution that appears to work is a re-install of Windows. Seriously? If I try netsh advfirewall firewall set rule group="Network Discovery" new enable=Yes ...it says "No rules match the specified criteria" EDIT: by the way, these services are running. DNS Client Function Discovery Resource Publication SSDP Discovery UPnP Device Host in any case, since it works with no firewall, I would assume all necessary services are present and running. The issue is a firewall thing, but I don't know how to diagnose further, or fix it. Q1: Is there a way to definitively insure the correct holes are punched through the Windows Firewall to allow Network Discovery to function? Q2: Should I expect the "predefined" firewall rules to be greyed out? Q3: Why did this change?

    Read the article

  • Why wouldn't the default Control Adapter mappings work on Chrome or Safari?

    - by Deane
    I have confirmed that my Control Adapters are not triggering in Chrome and Safari. I've debugged, and the breakpoints inside the adapters just don't get hit in Chrome/Safari, when they work perfectly find in Firefox/IE. So, for Chrome/Safari, IIS is just ignoring the mapping. My AdapterMappings.browser file looks like this: <browsers> <browser refID="Default"> <controlAdapters> [...adapters here....] </controlAdapters> </browser> </browsers> This should provide mappings for all browsers, correct? I used the Charles proxy to check what user agents were being sent. They are: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5 Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7 Any idea why this would be? Everything I've read tells me that my browser mappings are correct? And, as I said this works for IE/Firefox, so I know my configuration is technically correct.

    Read the article

  • USB TO DB9 Adapter

    - by Ioudas
    I have a USB-to-DB9 adapter, no FCC serial visible anywhere, that I need drivers for. I can't seem to get any relevant info searching on Google. Does anyone have any good ideas where I might be able to get a lead on some drivers? I'll even upload a picture of it.

    Read the article

  • Differentiate VMware network adapter from physical network adapters

    - by Venkat
    I have to differentiate between the real addresses and the VM addresses using any Windows API. I'm using Getadaptersaddresses API to populate a list of ipaddresses for the local machine. I need to extract only the "real" addresses apart from the addresses associated with the VMware network adapter and other addresses(auto-configuration and tunnel adapter addresses) I've not been able to find any API or any flag to differentiate this. Is there any way this can be done? PS:The IfType flag in the IP_ADAPTER_ADDRESSES structure returned by Getadaptersaddresses doesn't help me differentiate between VMware addresses and the real addresses

    Read the article

  • I found two usb sticks on the ground. Now what?

    - by Stefano Borini
    As from subject. I want to see what's inside. I am seriously interested in finding the owner if possible and returning them, but I am worried it could be an attempt at social engineering. I own a macbook intel with OSX 10.6. It is a very important install. What would you do in my situation if you want to see the content without risks ? Any proposal welcome. Edit: I decided not to plug them in, and I brought them to the hotel reception. They will forward it to the police.

    Read the article

  • USB transfer speed "logarithmically" decreases. Why and can it be improved?

    - by starship
    I have an external hard drive. Just today I tried to copy a bigger file (it was film of ~230 MB) and at first it rushed up until ~70%. There is started decreasing. At first it started at around 56 MB/s Then it rapidly dropped to 23 MB/s (File transfer was 70% complete) Then it slowly started decreasing until it was around 2 MB/s (File was ~90% complete) When it finished the transfer it was slightly above 1.5 MB/s. To describe it graphically: If you drew a curve of the decrease it would probably resemble the graph of a logarithm function So, what I'm really asking is: "Why does this happen?" and "Is there a way around it?" Thank you!

    Read the article

  • VirtualBox "Bridged Adapter" when host NIC is turned off

    - by chris_l
    Hi, I'm running Linux (Debian Etch) in a VirtualBox VM on my MacBook. I usually ssh from my Mac terminal to the guest machine. I also want to access the internet from my guest, so I set up my host's WLAN card (en1) as a bridged adapter for eth0 on the client. This works fine, but when I turn off the WLAN card (e.g. to reduce battery consumption), I'd still like to ssh from my host to the guest. This fails of course, because en1 loses its IP address. Is a bridged adapter the best option for what I want to do? How can I make it work? (A simple "ifconfig en1 add 10.0.0.4" didn't do the trick...) Thanks Chris

    Read the article

  • Network config with pppoe and Ubuntu 13.10

    - by Pavel
    I have an internet connection that is using pppoe. In my windows I do not assign an ip address for my network and I am able to connect using password and username. I installed Ubintu 13.10 today, and I did pppoeconf, and I setup an ip/network mask and changed the mac address in the options, and I was able to connect to the Internet. I restarted the computer, and I got a message saying that the wired connection is not managed. Internet was not working. I went to network manager file, and I changed the option to true, but I still can't connect to the Internet. I am pretty new to linux. How can I get my Internet working? Thanks

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >