Search Results

Search found 6432 results on 258 pages for 'wireless adapter'.

Page 26/258 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • Limited connection whenever I connect to a Wi-Fi network outside the company

    - by anderZubi
    Whenever I connect my work laptop to a wireless network outside of my company, the connection shows as Limited, and there is no internet access. I have tried several times by disabling/enabling the network adapter, restarting the computer... without success. Sometimes, after a while, without taking any action, it shows fine, and I have internet access. But can pass 2 hours before this happens. My computer is under a domain network, but I don't think that's the problem, because I can successfuly connect other computers belonging to same domain to other networks. I'm running Windows 8 Pro and my network adapter is the following: Qualcomm Atheros AR9285 Wireless Network Adapter Any idea of which is the problem and how to solve it?

    Read the article

  • Can't detect wireless networks, running ubuntu 9.10 on eeepc 1000he

    - by David Brown
    Hi, I am running Ubuntu 9.10 on an ASUS eeepc 1000HE, and my wireless card, RaLink RT 2860, is failing to recognize any wireless networks. It was working fine this morning, until I accidentally hit Fn F2, disabling the wireless card. I hit Fn F2 again to reenable it, but it no longer will detect any wireless networks (and other computers in the household do recognize them). Any help at all will be greatly appreciated! I googled quite a bit and talked to a human about this but could not fix it. We tried dhclient ra0, which returned There is already a pid file /var/run/dhclient.pid with pid 2438 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.2 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/ra0/00:25:d3:13:f4:20 Sending on LPF/ra0/00:25:d3:13:f4:20 Sending on Socket/fallback DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. No working leases in persistent database - sleeping. Other data: iwconfig returns (other stuff here...) ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA" Mode:Auto Frequency=2.412 GHz Bit Rate=1 Mb/s RTS thr:off Fragment thr:off Link Quality=10/100 Signal level:0 dBm Noise level:-87 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ifconfig returns (other stuff here...) ra0 Link encap:Ethernet HWaddr 00:25:d3:13:f4:20 inet6 addr: fe80::225:d3ff:fe13:f420/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:583 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 ra0:avahi Link encap:Ethernet HWaddr 00:25:d3:13:f4:20 inet addr:169.254.7.117 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 Interrupt:19

    Read the article

  • ListView adapter data change without ListView being notified

    - by brockoli
    I've written a ListActivity that has a custom list adapter. The list is being updated from a ContentProvider when onCreate is run. I also have a service that gets started when I run the app and it first updates the ContentProvider, then sends a Broadcast that the content has been updated. My ListActivity recieves the broadcast and tries to update my ListView. My problem is, I'm getting intermittent errors about the ListView adapter data changing without the ListView being notified. I call the notifyDataSetChanged() method on my list adapter right after I update it. What it seems like is happening is the list is still in the process of being updated after first call in onCreate when it recieves the broadcast from the service to update, so it tries to update my ListView before it's finished updating from it's first run. Does this make sense? Here is some of my code. NOTE: The service is working properly, it gets new data and updates my ContentProvider, and I do get the broadcast in my activity when it is updated. @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); ctx = this; getPrefs(); setContentView(R.layout.main); // Setup preference listener preferences = PreferenceManager.getDefaultSharedPreferences(this); preferences.registerOnSharedPreferenceChangeListener(listener); // Setup report list adapter ListView nzbLv = (ListView) findViewById(R.id.report_list); nzbla = new NZBReportListAdaptor(ctx); getReports(); nzbla.setListItems(report_list); nzbLv.setAdapter(nzbla); // Broadcast receiver to get notification from NZBService to update ReportList registerReceiver(receiver, new IntentFilter(NZBService.BROADCAST_ACTION)); startService(new Intent(ctx, NZBService.class)); } @Override public void onResume() { super.onResume(); timerHandler.resume(); new updateSabQueue().execute(); //updateList(); } @Override public void onPause() { super.onPause(); timerHandler.pause(); unregisterReceiver(receiver); } private BroadcastReceiver receiver = new BroadcastReceiver() { public void onReceive(Context context, Intent intent) { Toast.makeText(ctx, "NZBService broadcast recieved", Toast.LENGTH_SHORT).show(); updateReportList(); } }; private void updateReportList() { new updateReportList().execute(); } private class updateReportList extends AsyncTask<Void, Void, Boolean> { /* (non-Javadoc) * @see android.os.AsyncTask#onPreExecute() * Show progress dialog */ protected void onPreExecute() { } /* (non-Javadoc) * @see android.os.AsyncTask#doInBackground(Params[]) * Get new articles from the internet */ protected Boolean doInBackground(Void...unused) { getReports(); return true; } /** * On post execute. * Close the progress dialog */ @Override protected void onPostExecute(Boolean updated) { if (updated) { Log.d(TAG, "NZB report list adapter updated"); synchronized(this) { nzbla.setListItems(report_list); } Log.d(TAG, "NZB report list notified of change"); nzbla.notifyDataSetChanged(); } } } Now that this question is answered, I will post my updated code in an effort to help others who might come across it. @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); ctx = this; getPrefs(); setContentView(R.layout.main); // Setup preference listener preferences = PreferenceManager.getDefaultSharedPreferences(this); preferences.registerOnSharedPreferenceChangeListener(listener); // Setup report list adapter ListView nzbLv = (ListView) findViewById(R.id.report_list); nzbla = new NZBReportListAdaptor(ctx); report_list.addAll(getReports()); nzbla.setListItems(report_list); nzbLv.setAdapter(nzbla); // Broadcast receiver to get notification from NZBService to update ReportList registerReceiver(receiver, new IntentFilter(NZBService.BROADCAST_ACTION)); startService(new Intent(ctx, NZBService.class)); } private class updateReportList extends AsyncTask<Void, Void, ArrayList<Report>> { /* (non-Javadoc) * @see android.os.AsyncTask#onPreExecute() * Show progress dialog */ protected void onPreExecute() { } /* (non-Javadoc) * @see android.os.AsyncTask#doInBackground(Params[]) * Get new articles from the internet */ protected ArrayList<Report> doInBackground(Void...unused) { return getReports(); } /** * On post execute. * Close the progress dialog */ @Override protected void onPostExecute(ArrayList<Report> updated) { nzbla.setListItems(updated); nzbla.notifyDataSetChanged(); } } private ArrayList<Report> getReports() { ArrayList<Report> reports = new ArrayList<Report>(); ContentResolver r = getContentResolver(); Cursor c = r.query(NZBReportProvider.CONTENT_URI, null, null, null, NZBReportProvider.ARTICLE_KEY_ROWID + " DESC"); startManagingCursor(c); Log.d(TAG, "NZBReport cursor.getCount=" + c.getCount()); int title = c.getColumnIndex(NZBReportProvider.ARTICLE_KEY_TITLE); int desc = c.getColumnIndex(NZBReportProvider.ARTICLE_KEY_DESCRIPTION); int cat = c.getColumnIndex(NZBReportProvider.ARTICLE_KEY_CAT); int size = c.getColumnIndex(NZBReportProvider.ARTICLE_KEY_SIZE); int link = c.getColumnIndex(NZBReportProvider.ARTICLE_KEY_LINK); int catid = c.getColumnIndex(NZBReportProvider.ARTICLE_KEY_CATID); int date = c.getColumnIndex(NZBReportProvider.ARTICLE_KEY_DATE_ADDED); int group = c.getColumnIndex(NZBReportProvider.ARTICLE_KEY_GROUP); if (c.getCount() > 0) { c.moveToFirst(); do { URL url = null; try { url = new URL(c.getString(link)); } catch (MalformedURLException e) { // TODO Auto-generated catch block e.printStackTrace(); } reports.add(new Report(c.getString(title), url, c.getString(desc), c.getString(cat), c.getString(date), c.getString(size), c.getInt(catid), c.getString(group))); } while (c.moveToNext()); } return reports; }

    Read the article

  • Is there a way to run CUDA applications with the CUDA device being a secondary adapter?

    - by Slartibartfast
    I've been trying to run a CUDA program on a remote computer which has Windows 7 installed. The GPU is GeForce GTX 480. One of the problems I've been facing is that, the computer has two adapters, 1) Standard VGA Adapter 2) NVIDIA GeForce GTX 480 Even though this shows in the device manager. The desktop uses the standard VGA Adapter. I'm assuming this is because the Standard VGA is the primary adapter. Also the device manager shows that the monitor is connected to the standard VGA Adapter. In this scenario if i try to run any CUDA application it fails to recognise a CUDA capable device. Is it necessary for the NVIDIA adapter to be the primary one? Or is there any way to use CUDA when the graphics card is a secondary adapter. I've seen a few posts in the NVIDIA forums on this before, one suggests using another low cost NVIDIA card as the primary adapter, but that is currently not an option. I couldn't find any other solutions. Thanks I tried running the deviceQuery test from the NVIDIA GPU Computing Samples. This was the result i obtained CUDA Device Query (Runtime API) version (CUDART static linking) cudaGetDeviceCount FAILED CUDA Driver and Runtime version may be mismatched FAILED The driver version I'm using is 263.06. The CUDA version is 3.2 I ran the same test on my desktop which also has windows 7 and a GeForce GTX 465. The CUDA toolkit version is 3.2. The driver version was the same and the test passed, although it failed with an older driver.

    Read the article

  • Troubleshooting wireless connection problem / site survey?

    - by johnnyb10
    I just started in the IT department of a small company (200 users) and it's clear that one of the main problems that is driving everyone crazy is the spotty nature of the wireless connectivity throughout the office, particularly in certain conference rooms. This is a huge problem because the connection often drops during important presentations to clients. I was hired to help ease the load on the existing IT admin, who has done a great job, but is overloaded with many other tasks to deal with. So I would like to try to help out with this wireless issue. I am looking for advice on the best way to solve this problem--a realistic troubleshooting methodology that does not require me to spend any money. So far, I've experimented with Ekahau Heat Mapper, which is free and helps create a site survey. But I'm not exactly sure what I'm looking for or if there are other programs/tools/methods I should try as well. Any advice would be greatly appreciated. [Some background: The wireless setup consists of an HP ProCurve Mobility MSM (710?) controller that controls 10 access points throughout the building. There are three virtual wireless networks configured on the controller: one seems to be a default that cannot be changed, one is for internal employees and authenticates via Active Directory, and the third is a guest network for visitors. When I use HeatMapper, these show up as three different SSIDs, with different MAC addresses, all on the same channel. At first I thought maybe this would cause interference, but this seems to be the way the controller works;apparently, it automatically configures the channels to avoid interference from the other APs on the network.]

    Read the article

  • Wireless disconnects at random after upgrade to Ubuntu 10.4

    - by Daniel Elessedil Kjeserud
    After upgrading my home server from Ubuntu 8.10 to 10.4 my wireless seemingly drops out, even though my IRC client keeps it's connection to the servers, so it looks like the machine just stops taking wireless requests. A ping will give a me this Request timeout for icmp_seq 27 ping: sendto: Host is down After a while the machine just starts responding again, without any interaction from me. When the machine comes back, this is what dmesg gives me [ 18.296288] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.296350] wlan0: deauthenticating from 00:1b:63:22:a4:5f by local choice (reason=3) [ 18.296440] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.298697] wlan0: direct probe responded [ 18.298706] wlan0: authenticate with AP 00:1b:63:22:a4:5f (try 1) [ 18.306836] wlan0: authenticated [ 18.306886] wlan0: associate with AP 00:1b:63:22:a4:5f (try 1) [ 18.309396] wlan0: RX AssocResp from 00:1b:63:22:a4:5f (capab=0x411 status=0 aid=2) [ 18.309402] wlan0: associated [ 18.310187] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.447742] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 18.447748] apm: overridden by ACPI. [ 19.163282] padlock: VIA PadLock not detected. [ 28.352022] wlan0: no IPv6 routers present kjes@brin:~$ lspci 02:07.0 Network controller: RaLink RT2561/RT61 rev B 802.11g It's on a wireless network with WPA2, the machine worked without any problems on the same wireless network since Ubuntu 8.10 was the most resent version, and there have been no changes to my network recently. Even though the server drops out, everything else on the network keeps working like normal.

    Read the article

  • Is browser based wireless authentication secure?

    - by johnnyb10
    Our wireless network previously used a preshared WPA/WPA2 key for guest access, which allows them access to the Internet. (Our employee access uses 802.1x authentication). We just had a wireless consultant come in to fix various wireless issues we had; one of the things he wound up doing was changing our guest access to HTML-based instead of the preshared key. So now that guest SSID is open (instead of using WPA) and users are presented with a browser-based login screen before they can get on the Internet. My question is: Is this an acceptable method from a security standpoint? I would assume that having an open network is necessarily a bad idea, but the consultant said that the traffic is still using PEAP, so it's secure. I didn't get a chance to question him further on this because we ran late and a bunch of other things came up. Please let me know what you think about the advantages/disadvantages of using HTML-based wireless authentication as opposed to using a preshared WPA key. Thanks...

    Read the article

  • DLINK WBR-1310B Wireless Router seems to hang...

    - by Ira Baxter
    I have a brand new DLINK-1310B Wireless Router (box never before opened, although I bought it the neighborhood computer junk store). I am using it at home (and in fact am using it this instant from a wireless laptop). When operative, I can ping it at 192.168.0.1, and I can log into it from the PC attached to by LAN and from the wireless PC at //192.168.0.1. In the course of the day since I've installed, it seems to have locked up 3 times. Each time the symptoms are my web browser (or other internet service) stops with a "No internet connection" error. Attempts to contact the router via 192.168.0.1 get no reaction, from either the wireless laptop or from the hardwired PC sitting next to it. It doesn't respond to pings to that address either. Rebooting fixes it. Its brand new. I've seen discussion in other questions about aging cheap electronics. Its too new to be aged. Anyboyd else seen this behavior with a DLINK-1310? Or do I just need to exchange it for another and try again? (I hate rolling dice, I bought the DLINK becuase a previous Linksys died of apparant heating problems). Remarkably, nobody talks about how much software is in a router. Is the stuff just buggy?

    Read the article

  • D-LINK DIR-615 router keeps giving my wireless devices bad ip addresses

    - by mlsteeves
    I have a D-LINK DIR-615 router, and wired devices have no problem getting an IP, however; wireless devices end up with a 169.254.. address (subsequently, they cannot access the internet through the router). I have removed all wired connections from the router, so there is no other dhcp server running. I've also gone back to the store, and replaced it with another, thinking that maybe it was defective. According to the router, it gave 192.168.0.101 to the wireless device. According to the wireless device it got 169.254.67.71. I've tried both a laptop and an iPod Touch, both exhibit the same behaviour. Has anyone seen this type of behaviour, or have any ideas of stuff to try? NEW INFORMATION I looked at the logs on the router, and when the wireless device tries to connect, this is what is logged: Sep 10 18:13:39 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:31 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:26 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:23 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:21 UDHCPD sending OFFER of 192.168.0.111 I connected a computer directly to the router, and here is what it looks like: Sep 10 18:14:18 UDHCPD Inform: add_lease 192.168.0.110 Sep 10 18:14:14 UDHCPD sending ACK to 192.168.0.110 Sep 10 18:14:14 UDHCPD sending OFFER of 192.168.0.110 Not sure if that helps or not.

    Read the article

  • Windows 7 Automatically Connecting To Unsecured Wireless Networks On Startup

    - by Xtend
    Most of the questions on this topic related to folks connecting to somebody else's wireless network when their own was available and could remedy the situation by going to their connections and unchecking the "connect automatically" box. See this: " Avoid automatically connecting to wireless network on windows 7 " as an example. In my situation, I've noticed that Win 7 will automatically connect to any unsecured wifi network - even if I have never connected to it in the past. If I am traveling and boot Win 7, it will start and connect to what appears to be the best signaled unsecured network without prompting me for confirmation (note: in the above link, "Naveen" seems to have same problem). Obviously, that is a security concern to me. Further, when I open "Network and Sharing" and "Manage wireless networks" the network is not displayed (probably because I labelled it a public network). Again, these are new, never connected with before, wireless networks. I always promptly disconnect from them but don't want to have to be on constant guard for an auto connection to a malicious network. This began about a month ago, as I recall, Win 7 did not behave like this in the past, I didn't monkey with wifi settings, and don't use a 3rd party connection manager. I did have to download some internet security certificates for army website access but I don't think that should mess with network settings. Any ideas how I can tell Win7 cease automatically connecting to networks or, at least, to prompt me for a confirmation before connecting?

    Read the article

  • Windows 7: Wi-Fi connection drops intermittently - only returns after "Troubleshoot connection" resets the adapter

    - by sleske
    On our laptop (running Windows 7) the Wi-Fi connection drops intermittently. Symptoms: Connectivity is suddenly lost, and the "signal strenght" indicator in the tray shows zero strength and a yellow "star" symbol. What happens then: The problem does not resolve itself by just waiting. If I click on the tray icon, the "Windows network diagnostics" wizard pops up and tells me that there is a networking problem (duh). If I click on the "repair" button (not sure about the wording), the wizard works for a while, then reports that it has reset the network adapter. Then Wi-Fi works again. While the above procedure has worked every time so far, it is very annoying. It takes 10-20s to repair the connection, and in the meantime downloads, video streams etc. may have been aborted. Some more details: The problem occurs without any apparent regularity, but usually a few minutes after powerup (though not every time). It happens frequently enough to be annoying. It is unlikely to be a router problem - another laptop running at the same time usually has no Wi-Fi problems. I am at a loss about what to try to troubleshoot this. Any ideas? Computer: Acer Aspire 7739Z. Wi-Fi card: Atheros AR5B125

    Read the article

  • Wireless signal changes from strong to weak after connecting

    - by gibberish
    Router (primary AP) is a WRVS4400N, WAP (signal booster) is a WAP4410N. Problem: User is physically located within ten feet of WAP (200 feet from main wireless router). Signal is at 5 bars as user connects to wireless network. Within seconds, signal is at or below two bars and connection is poor. Background: Trying to solve problem of weak wireless signal in back offices. Desired result is for client laptops to automatically switch to the stronger signal. WAP is connected to network via Ethernet cable. WAP is set to AP mode (instead of Wireless Repeater mode) WAP does appear to boost signal. Using Windows 7 sys tray Connect To A Network applet, can observe signal boost as laptop approaches the WAP. Above-described problem happens to users located near or beyond the WAP. It does not happen to users in close proximity to the router. Secondary Question: If using WAP in AP Mode, do WAP and Router (primary AP) need to be on the same channel?

    Read the article

  • iPod Shuffle (3G) - USB adapter cables

    - by bencnscp
    The iPod shuffle (3G) seems to have a proprietary connector that is different than the previous one for iPod shuffle (2G). I have tried the cable that comes with the 2G, and even a 3rd party charger, and their connectors are physically keyed so you cannot plug them in. Is anyone using a 3rd-party cable (besides the one Apple provided)?

    Read the article

  • getting Internet connection sharing working in a slightly more complicated configuration

    - by tirichitirca t
    I have the following configuration: Computer A - Mac OSX 10.8.4, wireless & wired adapters Computer B - Windows 7 (64 bit), wireless & wired adapters, has internet connection via the wired adapter (ethernet) d-link wired/wireless router. Problem to solve: Connect from computer A to the internet through the wired connection of computer B. I tried the following: I set up a local network between A and B using the d-link router. The configuration is this: D-link router - 192.168.0.1 A - wired connection to the d-link router, static 192.168.0.101 (I could have used the wireless but I preferred the wired connection) B - wireless connection to the d-link router DHCP 192.168.0.102 (but I made sure it always gets the same address) B - wired connection to the internet using some address that begins with 10.x.y.z. In this configuration A can see B. I enabled ICS on the wired adapter of B. I set up the Gateway of A to point to B and DNS servers to point to the DNS servers specified for the 10.x.y.z address. It doesn't work, A goes only as far as B. It can ping the 10.x.y.z address of B though. I then found this article: http://terrybritton.com/windows-internet-connection-sharing-ics-not-working-with-linux-bridging-is-the-solution-916/. Terry is suggesting that a bridge should be defined on B between the two connections. I tried that but basically computer B is screwed as soon as I create the bridge. It can't connect to the internet anymore. It is as if the network bridge seems to think the traffic to the internet should go from the wired connection to the wireless and not the other way around. The other thing that puzzles me is the router itself. In general the router needs an internet address. In a normal configuration it is the router that gets the ip address and the internet traffic goes through the router. In my case I am not interested in that. So, any suggestions to get this working? I wouldn't shy away from using a commercial software but I would think windows 7 should allow me to do it. Thanks

    Read the article

  • Can a USB/IDE/SATA adapter be flaky?

    - by Ward
    I use USB/IDE/SATA converters a lot and on the two that I have now, I sometimes get errors copying files to drives. It only happens when I'm copying big files to the drive (big can mean as little as 100MB, I think it happens more often with bigger files - 300MB or more), and basically the copy will fail and I'll get one or more error messages about "Delayed write failed." But if I disconnect the drive and re-connect it, I'll usually be able to continue. (The file that was being copied will be corrupt, but otherwise the drive is fine.) I just noticed a new type of flakiness: the data transfer rate can vary widely. I copied one set of files (5x300MB files) and it took 10+minutes, then I copied another set (approx. the same sizes) and it took less than a minute. I haven't done systematic testing, the other things I'm doing on my laptop at the same time might have some impact, and I haven't cross-checked the two adapters I have and the 3 hard drives I'm working with to see if there's a pattern. I'm more wondering if anyone else has seen anything like this.

    Read the article

  • How to fix notifyDataSetChanged/ListView problems in dynamic Adapter wrapper Android

    - by ipaterson
    Summary: Trying to dynamically add heading rows to a ListView via a custom adapter wrapper. ListView is having trouble keeping the scroll position in sync. Runnable demo project provided. I would like to dynamically add items to a list based on the values in a CursorAdapter, several positions ahead of what the user is currently viewing. To do this, I have an adapter that wraps the CursorAdapter and keeps the new content indexed in a SparseArray. The ListView needs to be updated when items are added to the custom adapter, but I have met a lot of pitfalls trying to get that to work and would love some advice. The demo project can be downloaded here: http://dl.dropbox.com/u/15334423/DynamicSectionedList.zip In the demo, the headings are added dynamically by looking ahead 10 places to find the correct position where the list items switch to the next letter. Each implementation of notifyDataSetChanged has problems as described: Demo 1 This demo shows the importance of notifyDataSetChanged(). On clicking anything, the app will crash. This is due to some sanity checking in ListView... mItemCount != adapter.getItemCount(). Moral is, we need to notify the list that data has changed. Demo 2 The natural next step is to notify the ListView of changes when changes occur. Unfortunately, doing so while the ListView is scrolling firmly breaks all touch interaction until the app switches out of touch mode. You will need to "fling scroll" far enough to generate new headings in order to notice this. Tapping the screen will not cause the scroll to stop, and once stopped none of the list items will be clickable. This is due to some if (!mDataChanged) { /* do very important stuff */ } code in AbsListView.onTouchEvent(). Demo 3 To fix this, Demo 3 introduces a pendingChanges flag and the custom Adapter gains a notifyDataSetChangedIfNeeded() which can be called by the ListView once it has entered a "safe" state for changes. The first point where changes must be notified is in ListView.layoutChildren(), so I overrode that method to first notify of changes if needed, then call through. Fling past at least one heading then click a list item. This doesn't quite work right, though I'm not totally sure why. Tapping or selecting an item with the keyboard/trackball causes the list to refresh without properly syncing the old position. It scrolls to the top of the list which is not acceptable. Demo 4 The scroll problem in Demo 3 can be conquered, at least in touch mode. By adding a call to notifyDataSetChangedIfNeeded() on touch down, the data change happens to take place at such a time that all touch interaction works as expected and the list position is properly synced. However, I can't find an analog for that when the device is not in touch mode, not to mention the fact that it definitely seems like a hack. The list almost always scrolls back to the top, I can't find out what causes it to occasionally maintain the correct position. Since Android is fighting me at each step of the way, I feel like there should be a better approach. Please try the demo, if any fixes can be applied to get it working that would be great! Many thanks to anyone who can look into this, hopefully if we can get the code working it will be useful for others trying to accomplish the same optimization for lists with headings.

    Read the article

  • Asus PCE-N53 11n N600 PCI-E Adapter on 3.x kernel

    - by CITguy
    Problem ASUS PCE-N53 wireless NIC doesn't work for latest versions of the linux kernel. How do I get it working on my system? (Note: I'm posting the answer I've found for others to use.) Installing Driver for Linux 3.x Kernel ASUS provides Linux drivers from their website, but it mentions that the driver supports "Linux Kernel 2.6.x", so it won't work without a some modifications to the driver code. Fortunately, an archlinux forum mentions similar problems and one user was able to create a patch for kernel 3.8.x that seems to work with kernel 3.11.x. Here's how I got it working: Prerequisites Ubuntu: sudo apt-get install build-essential Arch: sudo pacman -S base-devel Steps: 1. Download the driver from the ASUS website The download can be found under "Support Drivers & Tools". 2. Unzip the contents of the downloaded file cd into the new directory 3. Patch The arch forum mentions a 3.8 patch file that needs to be downloaded. Download rt5592sta_fix_64bit_3.8.patch to the current directory. tar -xvf {driver_source.tar.gz} cd into the directory created in previous step patch -p1 < ../rt5592sta_fix_64bit_3.8.patch 4. Compile NOTE: You will need to use sudo for it to compile properly. sudo make sudo make install sudo modprobe rt5592sta 5. Enjoy If all is well, you should now have a working card.

    Read the article

  • I have a problem with a AE1200 Cisco/Linksys Wireless-N USB adapter having stopped working after I ran the update manager in Ubuntu 12.04

    - by user69670
    Here is the problem, I use a Cisco/Linksys AE1200 wireless network adapter to connect my desktop to a public wifi internet connection. I use ndiswrapper to use the windows driver and it had been working fine for me untill I ran the update manager overnight a few days ago. When I woke up it was asking for the normal computer restart to implement the changes but after rebooting the computer, the wireless adapter did not work, the status light on the adapter did not light up even though ubuntu recognizes it is there and according to ndiswrapper the drivers are loaded and the hardware is present. the grep command is being a bitch for some unknown reason today so this will be long sorry Output from "lspci": 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI Radeon Xpress 200 Host Bridge (rev 01) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) 00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) 00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) 00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RC410 [Radeon Xpress 200] 02:02.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem 02:03.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Output from "lsusb": Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 009: ID 13b1:0039 Linksys AE1200 802.11bgn Wireless Adapter [Broadcom BCM43235] Bus 003 Device 002: ID 045e:0053 Microsoft Corp. Optical Mouse Bus 004 Device 002: ID 1043:8006 iCreate Technologies Corp. Flash Disk 32-256 MB Output from "ifconfig": eth0 Link encap:Ethernet HWaddr 00:19:21:b6:af:7c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0xb400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:13232 errors:0 dropped:0 overruns:0 frame:0 TX packets:13232 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1084624 (1.0 MB) TX bytes:1084624 (1.0 MB) Output from "iwconfig": lo no wireless extensions. eth0 no wireless extensions. Output from "lsmod": Module Size Used by nls_iso8859_1 12617 1 nls_cp437 12751 1 vfat 17308 1 fat 55605 1 vfat uas 17828 0 usb_storage 39646 1 nls_utf8 12493 1 udf 84366 1 crc_itu_t 12627 1 udf snd_ca0106 39279 2 snd_ac97_codec 106082 1 snd_ca0106 ac97_bus 12642 1 snd_ac97_codec snd_pcm 80845 2 snd_ca0106,snd_ac97_codec rfcomm 38139 0 snd_seq_midi 13132 0 snd_rawmidi 25424 2 snd_ca0106,snd_seq_midi bnep 17830 2 parport_pc 32114 0 bluetooth 158438 10 rfcomm,bnep ppdev 12849 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd 62064 11 snd_ca0106, snd_ac97_codec,snd_pcm,snd_rawj9fe snd_ca0106,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_ca0106,snd_pcm sp5100_tco 13495 0 i2c_piix4 13093 0 radeon 733693 3 ttm 65344 1 radeon drm_kms_helper 45466 1 radeon drm 197692 5 radeon,ttm,drm_kms_helper i2c_algo_bit 13199 1 radeon mac_hid 13077 0 shpchp 32325 0 ati_agp 13242 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid 8139too 23283 0 8139cp 26759 0 pata_atiixp 12999 1 Output from "sudo lshw -C network": *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 5 bus info: pci@0000:02:05.0 logical name: eth0 version: 10 serial: 00:19:21:b6:af:7c size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 10 0bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:20 ioport:b400(size=256) memory:ff5fdc00-ff5fdcff Output from "iwlist scan": lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. Output from "lsb_release -d": Ubuntu 12.04 LTS Output from "uname -mr": 3.2.0-24-generic-pae i686 Output from "sudo /etc/init.d/networking restart": * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... [ OK ]

    Read the article

  • Sharing a USB wireless-g adaptor between two computers

    - by cornjuliox
    I've got two computers here that need to connect via wireless-g usb adapter to the same network for internet access but only one USB adapter. Both PCs are using Windows XP, and I have no crossover cables. I've got both computers wired up to a router, and the PC with the active internet connection has ICS enabled, but the second PC gets no internet. Any ideas?

    Read the article

  • Home networking - Wireless switch?

    - by gamers2000
    I currently have a Linksys WRT160N that has a couple wireless clients and a few wired clients. We are planning to switch from DSL to cable and unfortunately, there isn't a cable point in a location close to the wired clients (i.e. the new location of the router would be too far from the wired clients to lay Ethernet cables). Thus, I was wondering if there was a wireless switch of some sort in which it would be a standard Ethernet switch that would connect to my wireless network? (This is a home network,of course.)

    Read the article

  • Windows XP does not list WPA wireless networks

    - by Tomalak
    What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

    Read the article

  • Netgear Wireless-n 150 wrn1000v2

    - by Jordan
    I'm not sure if this is the place to ask this question, move it if it's not. I'm trying to fix a wireless network. It only connects to a few devices and when it does work the connection is spotty. The router is a netgear wireless-n 150 wrn1000v2. Connecting to the router isn't a big problem, but connecting to the internet via WiFi is. I can't upgrade the firmware becuase it is from Comcast and it seems as though they only allow their versions of the firmware. I've monitored the network with wireshark and I see that the devices that are having trouble connecting are constantly asking "who is 192.168.1.1 tell 192.168.1.x" where x is the ip for the device. 192.168.1.1 is the router. This is from running wireshark on the wireless device. What does this mean. At this point I feel like buying a new router is the only option.

    Read the article

  • Setting up multiple wireless access points on same network

    - by SqlRyan
    I'd like to add wireless to my network, and I need multiple access points to cover the whole area. I'd like to set them up so that there's only one "wireless network" that the clients see, and it switches them as seamlessly as possible between access points as they wander around (if that's not possible, then at least have it so that they don't need to set up the security by hand on each one the first time, if possible). I've searched online, and there are quite a few sets of mixed instructions (same vs different SSID, frequency, does the security need to match exactly, etc.). Can somebody who has some experience doing this please let me know what they did? I imagine it's pretty simple, but there seems to be no clear cut "yes, you can do this" online, even though I know you can. I have a mid-size LAN with about 20 workstations and two Domain Controllers on it. Also, I'll be doing this with consumer wireless components, if it makes a difference, not enterprise-level components (ie. Linksys rather than Cisco).

    Read the article

  • Driver choice for addressing ubuntu wireless card issues

    - by Holly
    Hello, this should be a relatively simple question. I'm attempting to get my windows wireless card to work with ubuntu, booted from my portable hard drive. This is the guide I'm attempting to follow is on help.ubuntu.com, /community/WifiDocs/Driver/Ndiswrapper My wireless card is a Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller. My computer is an HP Pavilion Entertainment dv5 notebook, which came with Vista 64. I would like confirmation about which of the drivers I should use. At this point, I'm leaning towards Broadcom BCM4318 HP Pavilion zv6000, but I thought it best to ask advice before taking action. The drivers I have to chose from are listed on this page http://sourceforge.net/apps/mediawiki/ndiswrapper/index.php?title=Category:Broadcom Thanks! Holly

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >