Search Results

Search found 1096 results on 44 pages for 'xx'.

Page 26/44 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • Wireless router setup for 1-1 NAT

    - by Carlos
    What I have: A linksys router WAG160N with firmware version 2 A "pool" of 5 external static IP's provided by my ISP 213.xx.xxx.n All the required configuration values for the static IPs such as (Subnet Mask, Gateway and static DNS 1, 2, 3) Current WAN Configuration: Encapsulation: RFC 2364 PPPoA Multiplexing: VC QoS type: UBR DSL modulation: MultiMode What's connected to the network: 1 x Server (That I want to make available to the outside) 5 x Desktops with static internal IP's, such as 192.168.0.xx 2 x Network printers, also with internal static IP's 2 x Laptops 1 x NAS (Network Attached Storage) also on static IP What I want to do: I would like to make the server available from outside the network, for example from your house. The problem is that Im not really sure how to do this. I have tried following the steps on the instruction manual in Linksys but they do not seem to work, once I set it up as shown bellow, I loose internet and all hell breaks loose. Going into further detail, I would prefer if the network is changed as little as possible, by this I mean that all the computers stay networked within eachother and only the server is accessible from the outside the network. What I need HELP with: I have read around that it is possible to set a 1-1 NAT (I know where it is in the menu but have no clue what it does...) so that I can NAT a single public IP directly to a single private IP (in our case the server). But please, How do I do that? Or maybe an alternative?

    Read the article

  • Formula-based Excel page headers

    - by Jake Krohn
    I'm using the "Rows to repeat at top" function in Excel's "Page Setup" dialog to ensure that a multi-row header block appears on every printed page of my worksheet. However, I'd like to be able to change certain bits of the header based on the content of the current page. I would simply like to display the value of one cell in the first row that is printed on the page. If this is my header: Section: xx And the data looks like this (columns are Section and Name): 1 Foo 1 Bar 2 Baz I want the "xx" in the header to be "1". If, further down on the next page, the value in the Section column is "3", I want that printed in the header of the next page. I originally thought that using the "OFFSET" function might help, e.g. ="Section: "&OFFSET(A2, 1, 0) But it only shows the offset from the original placement of the header, thus only working on page 1. The end document is a PDF, so right now I'm able to go back in with the "TouchUp Text Tool" in Acrobat and add the numbers page by page. But it gets to be a tedious process with 70+ page reports. Anyone have any better ideas that don't require me mucking up the original Excel document with inserted headers every N lines? This is Excel 2008 for Mac, if it makes a difference.

    Read the article

  • network routing between mac & virtual XP

    - by Kevin
    Hi - I have a max laptop running XP inside VirtualBox. The network is setup to be a "Bridged Adapter" so that the IPs for both the host & guest OS's are assigned by my wireless routed. My guest XP has Nortel VPN connecting to corporate lan. When this is connected, I want to allow my host Mac OS to access the corporate network. But I'm struggling. Without Nortel VPN running, I can change routing on the mac so all traffic is sent via the guest XP - this works. But once I activate the VPN, this no longer works. If I try to change the routing on mac to run through the IP address assigned to the Nortel adapter, I get a "Network is unreachable" error. Below is the output from ipconfig /all on the guest XP OS. I'm beginning to believe that what I want to do is not possible because of the way Nortel secure the VPN - but before I give up I thought I'd post the problem here. Thanks, Kevin z:\eclipseworkspace\RESMobileSuite\trunk>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : zzzz-3177b42dd0 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : zzzz.zzz Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : AMD PCNET Family PCI Ethernet Adapter Physical Address. . . . . . . . . : 08-00-XX-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 Lease Obtained. . . . . . . . . . : 30 April 2010 12:22:02 Lease Expires . . . . . . . . . . : 01 May 2010 12:22:02 Ethernet adapter {8EB7A442-9683-45FB-A602-56110A4B3434}: Connection-specific DNS Suffix . : zzzz.zz Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler Miniport Physical Address. . . . . . . . . : 44-45-YY-YY-YY-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XXX.4.52.62 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : XXX.4.52.62 DNS Servers . . . . . . . . . . . : XXX.6.21.36 XXX.6.21.100

    Read the article

  • DNS lookup fails when with all the MAC workstations

    - by user39564
    Hi, I am having this insane problem. We are mac-heavy users. Around 10 workstations, one Xserve server, two windows workstation and one Linux (me). Last year I added an A record to our domain's DNS. However we had to change that a few months ago to a new IP. But all the Mac workstations fail to resolve the proper DNS and they still resolve to the old IP, even after 2 months. On both the windows workstation and my linux box a simple nslookup resolves to proper IP. However, on ALL the mac workstation, dig and nslookup report the old IP address. From my linux workstation: jp@lo:~$ nslookup - 208.67.222.222 client.xyz.com Server: 208.67.222.222 Address: 208.67.222.222#53 Non-authoritative answer: Name: client.xyz.com Address: 68.71.40.xx But when I am trying the exact same command from any Mac workstation, I get the old IP: $ nslookup - 208.67.222.222 client.xyz.com Server: 208.67.222.222 Address: 208.67.222.222#53 Non-authoritative answer: Name: client.xyz.com Address: 98.143.155.xx The strange thing is that this only happens in our internal network. No problem from home nor from another server. I did try to flush the DNS, don't worry. It did not help. I am starting to wonder if my router (OpenWRT) or Mac OS X Server is not in some way spoofing the DNS request and thus acting as a cache. Any suggestions/comments would be grateful. Thank you, JP

    Read the article

  • Migrating WebLogic 10.3.0 to new host. Slow managed server startup times

    - by wadevondoom
    We are migrating our Blue Martini Commerce application (only supported on WebLogic 10.3.0) to a new host (Redhat 6.3 on a VMWare ESX vm). We are seeing extremely slow start up times for our managed server(s) that is basically 20x slower than our current production. As a for instance the Publish managed server takes ~30 - 45 seconds in current production and in the new environment it takes ~10 minutes. The setup uses the same domain structure and JVM as the current production environment. The same setup files are used. We use jdk1.6.0_33 on 64 bit architecture. We used the generic 64bit weblogic installer and used pack / unpack utilities to migrate the domain. The JAVA_OPTS to start this server are: "-d64 -Xms256m -Xmx512m -XX:PermSize=48m -XX:MaxPermSize=256m" The sysadmins have checked /etc/sysctl.conf and /etc/limits.conf to ensure we were not hitting some kind of process limit. As I am not sure what this managed server does from a Blue Martini perspective during the phase of startup I also had the DBA check to ensure that Oracle RAC (11.2.0.3) wasn't also hitting some kind of process limit or if there was a tns listener issue. The new host is quite a bit stricter with their server lock downs so there are a few differences.... Redhat 6.3 in new env, RH 5.7 in current SElinux is targeted in new env and disabled in current VM in new env and dedicated hardware in current iptables disabled in current. It was enabled in new prod but I had them disable it just in case I apologize for not being more specific. I am mostly hoping got some tips. I do not have the typical root access I would normally have in this environment. I am just hoping got a path forward. I did a few 'kill -3' to see if there are blocked threads and I got nadda. The service works for all intents and purposes it is just painfully slow. Thanks you all in advance for reading and best regards. Wade

    Read the article

  • Why is only one wget command working in my crontab?

    - by afEkenholm
    I wish to fetch content from a PHP script on my server two times a day, altering a query variable lang to set what language we want, and save this content in two language specific files. This is my crontab: */15 * * * * ~root/apache.sh > /var/log/checkapache.log 10 0 * * * wget -O /path/to/file-sv.sql "http://mydomain.com/path/?lang=sv" 11 0 * * * wget -O /path/to/file-en.sql "http://mydomain.com/path/?lang=en" The problem is that only the first wget command line is being executed (or to be precise: the only file that is being written is /path/to/file-sv.sql). If I switch the second and the third row, /path/to/file-en.sql gets written instead. The first line always runs as expected, no matter where it is. I then tried using lynx -dump "http://mydomain.com/path/?lang=xx" > /path/to/file-xx.sql to no avail; still only the first lynx line executed successfully. Even mixing wget and lynx did not change this! Getting kinda desperate! Am I missing something? There are thousands of articles on crontab (combined with) wget or lynx, but all seems to cover basic setups and syntax. Does anyone got a clue of what I am doing wrong? Thanks, Alexander

    Read the article

  • server_name seems to be ignored in nginx

    - by user46171
    I have two domains set up in nginx.conf. Both are using SSL with their own certificates, and proxy to Apache. However the second domain is completely ignored, and nginx always resolves to the first domain. I can't see what in the issue is with this configuration, having set the server_name in each case correctly (as far as I can see): http { include mime.types; default_type application/octet-stream; keepalive_timeout 65; upstream site { # real IP addresses masked server xx.xxx.x.xxx; server xx.xxx.x.xxx; } server { # this domain always works listen 443; server_name *.first-site.com; ssl on; ssl_certificate /var/ssl/first-site.crt; ssl_certificate_key /var/ssl/first-site.key; location / { access_log off; proxy_connect_timeout 15; proxy_next_upstream error; proxy_pass http://site; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Protocol https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } server { # this domain is ignored, always resolves to first-site.com listen 443; server_name *.second-site.com; ssl on; ssl_certificate /var/ssl/second-site.crt; ssl_certificate_key /var/ssl/second-site.key; location / { access_log off; proxy_connect_timeout 15; proxy_next_upstream error; proxy_pass http://site; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Protocol https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } }

    Read the article

  • Getting dwl-g122 to work on ubuntu

    - by User1
    I have a USB WiFi adapter, D-Link dwl-g122. I'm running Ubuntu 10.4. My laptop has a built-in wireless card that is connecting fine to the router. I plug in the usb and it never really connects. Here are some details: iwconfig wlan1 IEEE 802.11bg ESSID:"\x0B\xE1..." Mode:Managed Frequency:2.457 GHz Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on lshw -c network: *-network:1 description: Wireless interface physical id: 3 logical name: wlan1 serial: 00:13:46:8b:xx:xx capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg dmesg [ 1096.814176] wlan1: direct probe to AP xxx (try 1) [ 1096.820960] wlan1: direct probe responded [ 1096.820969] wlan1: authenticate with AP xxx (try 1) [ 1096.823790] wlan1: authenticated [ 1096.823869] wlan1: associate with AP xxx (try 1) [ 1096.827667] wlan1: RX AssocResp from xxx (capab=0x411 status=0 aid=1) [ 1096.827674] wlan1: associated [ 1142.590912] wlan1: deauthenticating from xxx by local choice (reason=3) lsmod|rt2 rt2500usb 19643 0 rt2x00usb 11260 1 rt2500usb rt2x00lib 32133 2 rt2500usb,rt2x00usb mac80211 238896 3 ath5k,rt2x00usb,rt2x00lib cfg80211 148725 4 ath5k,ath,rt2x00lib,mac80211 led_class 3764 3 ath5k,rt2x00lib,sdhci It looks like the driver loads but it doesn't feel like connecting. The behavior is identical even if I blacklist the other wifi card (using an ath5k driver). It's almost like it is using the wrong password or something. Does anyone know what is happening? Is anyone using Ubuntu successful?

    Read the article

  • is there a man in the middle attacking to my server machine?

    - by GongT
    My server works well about half a year. But a strange thing happened (several hours before). This server has two IP-address 58.17.85.19 & 117.21.178.19 When I navigate to http://58.17.85.19, nothing different as before. But http://117.21.178.19 will return a "302 Object moved" and become a "redirect loop" I do some test: ($cmd = "wget http://117.21.178.19/?xx=$RANDOM --max-redirect 0 -S --no-cache -O -") Step by step: run $cmd on my PC and my firend's one (we live in two side of China, far away). - got 302 run $cmd on this server - got 200 OK (content is correct result of index.php) run $cmd on another server in same computer room - got 200 OK telnet from my PC and build an HTTP request (type by hand) - got 200 OK shutdown php-fpm, run $cmd on my PC - got 302 run $cmd on server - 502 Bad Gateway shutdown nginx, run $cmd on both the server and my PC - Connection refused. create iptables rule, refuse any connection to 58.17.85.19:80. run nc -l 80 -k -vvv on server and run $cmd on my PC NC show me that.... Server accept connection (Connection from [my ip]) My connection closed ! (Remove fd xx from list) wget dump out response - got 302 I know that, normaly, NC will accept connection, then dump HTTP request from client, and client will wait for response. this connection will open forever(infact client will close connection becouse timeout), becouse NC can't give any response. So... where my request gone? who send an response to the client? some virus on my server system? If so, why 58.17.85.19 didn't has this error? or... I was attacked by a middleman?

    Read the article

  • ms excel 2010 in windows xp - when open workbook the data is formatted differently than when i saved it

    - by Justin
    I haven't been able to find an answer to this. I have multiple files that I use regularly in excel that now have cell formats of "date". Every single cell in the entire workbook (all sheets) is now formatted as "date". The problem is that I lost my formatting for percents, numbers years, etc and now everything is converted to date (xx/xx/xxxx). I am able to open previously saved versions of a file (prior to me having the problem) and the cells are formatted as I intend them to be (percents, numbers, general, as well as dates). Since this has happened on a couple different files recently, I am wondering how this is happening and how do I prevent it from happening in the future. I cannot cure the problem just by highlighting the entire sheet and converting back to general because I lose all my percents and number formatting. Example (Correct formatting): Month Year Working Days MTD POS Curr Rem May 2012 22 0 1,553,549 June 2012 22 0 1,516,903 June 2011 22 0 1,555,512 June 2010 22 0 1,584,704 Example (Incorrect formatting): Month Year Working Days MTD POS Curr Rem June Tuesday, July 04, 1905 Wednesday, January 04, 1900 Wednesday, January 18, 1900 213,320 July Tuesday, July 04, 1905 Wednesday, January 04, 1900 Monday, January 16, 1900 314,261 July Monday, July 03, 1905 Wednesday, January 04, 1900 Sunday, January 15, 1900 447,759 July Sunday, July 02, 1905 Wednesday, January 04, 1900 Monday, January 16, 1900 321,952 Sorry for the mess. Any suggestions?

    Read the article

  • Two network adapters in one WindowsXP PC, how to make them work?

    - by Deele
    I have a need to set up network so I can use two ethernet cards inside one Windows (Windows XP SP2) based PC, one for internet connection, second, for internal LAN. How should I configure each NIC, with what IP's, subnet masks and gateways, so I can use inernet on my PC and get in touch with devices on my LAN? I have found that there are some sort of re routing nessesary inside my PC, but how does it work? I have already set up some configuration already, but I can't use it together with PC #1 NIC #1 connected. I need to disconnect, to access NIC WEB interface. Current configuration: Switch #1 and PC #1 NAS #2 are gigabit one's, so I could access NAS with gigabit speed. PC #1 NIC #1 IP XX.XXX.162.106 SN 255.255.255.248 GW XX.XXX.162.105 PC #1 NIC #2 IP 10.0.0.1 SN 255.255.0.0 GW 0.0.0.0 NAS #1 NIC #1 IP 10.0.0.12 SN 255.255.0.0 GW 0.0.0.0 My question is - what exact configuration should I do for every NIC in this LAN, so it would work? Is it possible to achieve internet access for Laptop, that is inside that NIC #2 LAN (should I just set up basic ICS)?

    Read the article

  • Can not connect remotely to MySQL Server on Ubuntu 10.10

    - by BobFranz
    Ok I have searched google for two days trying to get this to work. Here are the steps I have taken so far: Clean install of Ubuntu 10.10 Install mysql 5.1 as well as admin Comment out the bind address in the config file Create a new database Create a new user that is username@% to allow remote connections Grant all access to this user to the new database EXCEPT the grant option Login on the server is ok using this new user and database on the localhost Login on the server is ok using this new user and database on the server internal network ip Login from a remote computer is ok using this new user and database using the internal network ip Login is not working when logging in with this username and database using the external ip address from the server or the remote computer. I have port forwarding enabled for this port and it is viewable from outside as confirmed by canyouseeme.org I have nmap'd using the following command on the internal ip and get the below result: nmap -PN -p 3306 192.168.1.73 Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:41 PST Nmap scan report for computername-System-Name (192.168.1.73) Host is up (0.00064s latency). PORT STATE SERVICE 3306/tcp open mysql Nmap done: 1 IP address (1 host up) scanned in 0.23 seconds I have nmap'd using the following command on the internal ip and get the below result(I have hidden ip for obvious reasons): nmap -PN -p 3306 xxx.xxx.xx.xxx Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:42 PST Nmap scan report for HOSTNAME (xxx.xxx.xx.xxx) Host is up (0.00056s latency). PORT STATE SERVICE 3306/tcp closed mysql Nmap done: 1 IP address (1 host up) scanned in 0.21 seconds I am completely stuck here and need some help. I have tried everything under the moon and still can not connect from a remote external ip address. Any help is greatly appreciated and I need to do anything to help find the problem let me know and I will post the results here.

    Read the article

  • Issues with returned mail sent to web-based email domains

    - by Beeder
    My company is having issues with returned mail that we send out to external domains. A few weeks ago we replaced a firewall and changed ISP providers and began subsequently having issues RECEIVING emails from external sources because we hadn't updated our new IPs in the DNS records. After making the necessary configuration changes and setting up SMTP forwarding over port 25 to our mail server, everything was working fine up until a few days ago when we started having mail sent out returned to us. We aren't having any trouble communicating internally (to recipients on our domain) but it seems we're having trouble with outbound messages to web-based email recipients. (@hotmail, @live, @yahoo, @gmail...etc) Currently we are running Server 2003 SP2 and exchange 2003. I'm very unfamiliar with configuring Exchange and could really use some help in narrowing down the possibilities. I did some research and am becoming suspicious of Sender ID being the culprit due to our recent IP address change and the likelihood that Sender ID is identifying us as a fake domain. Am I going in entirely the wrong direction? Any input or guidance would be infinitely appreciated. This is the message that is returned when an outbound message fails...this particular one was sent to my @live.com account for testing purposes... Your message did not reach some or all of the intended recipients. The following recipient(s) could not be reached: [email protected] on 5/17/2012 3:02 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. Unfortunately, messages from xx.x.xx.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. I tried a reverse DNS lookup and found that we are set up as a Forward-confirmed reverse DNS. So do I just need to contact my ISP and have them correct their DNS records or is this something I can solve on our end??

    Read the article

  • Amazon EC2 - Free memory

    - by Damo
    We have an amazon ec2 small instance running and over the past few days we noticed that the memory is going down and down. On the small instance, we are running apache and tomcat6 Tomcat is started with the following JVM parameters -Xms32m -Xmx128m -XX:PermSize=128m -XX:MaxPermSize=256m We use nagios to monitor stuff like updates to apply, free disk space and memory. Everything else is behaving as expected but our memory is going down all the time. Our app receives approx half a million hits a day When I shutdown apache and tomcat, and ran free -m, we had only 594mb of memory free out out of the 1.7gb of memory. Not much else is running on the small instance and when running the top command I cannot see where the memory is going. The app we run on tomcat is a grails webapp. Could there be a possibility that there is a memory leak within our application? I read online and folks say that a small amazon instance is perfect for running apach and tomcat. I found a few posts online that showed how to setup apache and tomcat to limit the memory usage and I have already performed those steps. The memory is not being used up as quick but the memory is still decreasing over time. We have other amazone ec2 small instances running grails apps and the memory is fairly standard on those nodes. But they would not be receiving as much traffic Just to add, when I run the top command on the problem server, I cannot see where all the memory is being used Any help with this is greatly appreciated The output of free -m when run on my server is as follows total used free shared buffers cached Mem: 1657 1380 277 0 158 773 -/+ buffers/cache: 447 1209 Swap: 895 0 895 In your opinion, does this look ok? At what stage would the OS give back memory, would it wait to the memory reaches 0% or is this OS dependent?

    Read the article

  • ?????Exadata????

    - by Liu Maclean(???)
    ??check Exadata Image & OS versions , GI & DB patches sundiag exacheck cellserv ==> imageinfo dbhost ==> /usr/local/bin/imagehistory Also check the version of the switch. Login to Switch and execute the following command [root@myswitch-1 sbin]# version [root@dmorlsw-ib2 sbin]# cd /usr/local/bin [root@dmorlsw-ib2 bin]# ls -lrt version -rwxr-xr-x 1 root root 20356 Apr 4 2011 version Output will look as below. [root@dmorlsw-ib2 ~]# version SUN DCS 36p version: 1.3.3-2 Build time: Apr 4 2011 11:15:19 SP board info: Manufacturing Date: 2009.05.05 Serial Number: "NCD3X0178" Hardware Revision: 0x0006 Firmware Revision: 0x0102 BIOS version: NOW1R112 BIOS date: 04/24/2009 ib8# cat /sys/class/infiniband/is4_0/fw_ver 7.2.300 ib8 # cat /sys/class/dmi/id/bios_version NOW1R112 ib8 # nm2version NM2-36p version: 1.0.1-1 Build time: Sep 14 2009 12:52:51 ComExpress info: Manufacturing Date: 2009.08.19 Serial Number: Hardware Revision: 0x0006 Firmware Revision: 0x0102 { case `uname` in Linux ) ILOM="/usr/bin/ipmitool sunoem cli" ;; SunOS ) ILOM="/opt/ipmitool/bin/ipmitool sunoem cli" ;; esac ; ImageInfo="/opt/oracle.cellos/imageinfo" ; uname -srm ; head -1 /etc/*release ; uptime | cut -d, -f1 ; $ILOM "show /SP system_description system_identifier" | grep = ; $ImageInfo -activated -node -status -ver | grep -v ^$ ; } | tee /tmp/ExaInfo.log $GRID_HOME/OPatch/opatch lsinv -all -oh $GRID_HOME | tee /tmp/OPatchInv.log $ORACLE_HOME/OPatch/opatch lsinv -all | tee -a /tmp/OPatchInv.log cat /tmp/ExaInfo.log Linux 2.6.18-128.1.16.0.1.el5 x86_64 ==> /etc/enterprise-release <== Enterprise Linux Enterprise Linux Server release 5.3 (Carthage) ==> /etc/redhat-release <== Enterprise Linux Enterprise Linux Server release 5.3 (Carthage) 20:37:56 up 458 days system_description = SUN FIRE X4170 SERVER, ILOM v3.0.6.10.b, r52264 system_identifier = Sun Oracle Database Machine Active image version: 11.2.1.2.3 Active image activated: XXXX-XX-XX 12:27:12 +0800 Active image status: success Active node type: COMPUTE Inactive image version: undefined FileName: OPatchInv.log ---------------- ... Oracle Home       : /u01/app/11.2.0/grid Central Inventory : /u01/app/oraInventory   from           : /etc/oraInst.loc OPatch version    : 11.2.0.1.2 OUI version       : 11.2.0.1.0 OUI location      : /u01/app/11.2.0/grid/oui ... -------------------------------------------------------------------------------- List of Oracle Homes:   Name                                       Location   Ora11g_gridinfrahome1         /u01/app/11.2.0/grid   OraDb11g_home1                  /u01/app/oracle/product/11.2.0/dbhome_1 -------------------------------------------------------------------------------- Installed Top-level Products (1): Oracle Grid Infrastructure                                           11.2.0.1.0 ... Interim patches (2) : Patch  9524394      : applied on Thu Jun 03 20:46:05 CST 2010 ... {TRACKING BUG FOR 11.2.0.1 DB MACHINE BUNDLE PATCH 3} Patch  9455587      : applied on Fri Apr 02 18:27:47 CST 2010 ... {MERGE REQUEST ON TOP OF 11.2.0.1.0 FOR BUGS 8483425 8667622 8702731 8730804} Rac system comprising of multiple nodes  Local node = dbserv01  Remote node = dbserv02  Remote node = dbserv03  Remote node = dbserv04 -------------------------------------------------------------------------------- OPatch succeeded. ... Oracle Home       : /u01/app/oracle/product/11.2.0/dbhome_1 ... Oracle Database 11g                                                  11.2.0.1.0 ... Interim patches (5) : Patch  8888434      : applied on Sat Jan 08 00:27:33 CST 2011 ... {AIX-ASM-CF: LMHB TERMINATE INSTANCE WHEN OFFLINE ONE FAILGROUP IN ASM DG} Patch  8730312      : applied on Thu Jun 03 21:30:03 CST 2010 ... {FWD MERGE FOR BASE BUG 8715387 FOR 12G} Patch  9502717      : applied on Thu Jun 03 21:25:54 CST 2010 ... {LMS HIT ORA-600 [KJBLDRMNEXTPKEY:SEEN] AND CRASHED THE INSTANCE} { + same 2 as GI above} ?? cell server Cache Policy cell08# MegaCli64 -LDInfo -Lall -aALL | grep 'Current Cache Policy' Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU cell09# MegaCli64 -LDInfo -Lall -aALL | grep 'Current Cache Policy' Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU Cache policy is in WB Would recommend proactive  battery repalcement. Example : a. /opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp  -Cache -LALL -aALL ####( Will list the cache policy) b. /opt/MegaRAID/MegaCli/MegaCli64 -LDSetProp  -WB  -LALL -aALL ####( Will try to change teh policy from xx to WB)     So policy Change to WB will not come into effect immediately     Set Write Policy to WriteBack on Adapter 0, VD 0 (target id: 0) success     Battery capacity is below the threshold value ??cell BBU??????: cell08# /opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuStatus -a0 BBU status for Adapter: 0 BatteryType: iBBU Voltage: 4061 mV Current: 0 mA Temperature: 36 C BBU Firmware Status: Charging Status : None Voltage : OK Temperature : OK Learn Cycle Requested : No Learn Cycle Active : No Learn Cycle Status : OK Learn Cycle Timeout : No I2c Errors Detected : No Battery Pack Missing : No Battery Replacement required : No Remaining Capacity Low : Yes Periodic Learn Required : No Battery state: GasGuageStatus: Fully Discharged : No Fully Charged : Yes Discharging : Yes Initialized : Yes Remaining Time Alarm : No Remaining Capacity Alarm: No Discharge Terminated : No Over Temperature : No Charging Terminated : No Over Charged : No Relative State of Charge: 99 % Charger System State: 49168 Charger System Ctrl: 0 Charging current: 0 mA Absolute state of charge: 21 % Max Error: 2 % Exit Code: 0x00 ????BBU ??: dcli -g ~/cell_group -l root -t '{ uname -srm ; head -1 /etc/*release ; uptime | cut -d, -f1 ; imagehistory ; ipmitool sunoem cli "show /SP system_description system_identifier" | grep = ; ipmitool sunoem cli "show /SP/policy FLASH_ACCELERATOR_CARD_INSTALLED /opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuStatus -a0 | egrep -i 'BBU|Battery|Charge:|Fully|Low|Learn' ; }' | tee /tmp/ExaInfo.log Target cells: ['cellserv01', 'cellserv02', 'cellserv03', 'cellserv04', 'cellserv05', 'cellserv06', 'cellserv07'] cellserv01: Linux 2.6.18-128.1.16.0.1.el5 x86_64 cellserv01: ==> /etc/enterprise-release <== cellserv01: Enterprise Linux Enterprise Linux Server release 5.3 (Carthage) cellserv01: cellserv01: ==> /etc/redhat-release <== cellserv01: Enterprise Linux Enterprise Linux Server release 5.3 (Carthage) cellserv01: 01:17:39 up 635 days cellserv01: Version : 11.2.1.2.1 cellserv01: Image activation date : 2011-03-25 11:59:34 -0800 cellserv01: Imaging mode : fresh cellserv01: Imaging status : success cellserv01: cellserv01: Version : 11.2.1.2.3 cellserv01: Image activation date : 2011-04-13 12:15:46 +0800 cellserv01: Imaging mode : patch cellserv01: Imaging status : success cellserv01: cellserv01: Version : 11.2.1.2.6 cellserv01: Image activation date : 2011-05-27 23:08:22 +0800 cellserv01: Imaging mode : patch cellserv01: Imaging status : success cellserv01: cellserv01: system_description = SUN FIRE X4275 SERVER, ILOM v3.0.6.10.b, r52264 cellserv01: system_identifier = Sun Oracle Database Machine cellserv01: Connected. Use ^D to exit. cellserv01: -> show /SP/policy FLASH_ACCELERATOR_CARD_INSTALLED cellserv01: show: No matching properties found. cellserv01: cellserv01: -> Session closed cellserv01: Disconnected cellserv01: BBU status for Adapter: 0 cellserv01: BatteryType: iBBU cellserv01: BBU Firmware Status: cellserv01: Learn Cycle Requested : No cellserv01: Learn Cycle Active : No cellserv01: Learn Cycle Status : OK cellserv01: Learn Cycle Timeout : No cellserv01: Battery Pack Missing : No cellserv01: Battery Replacement required : No cellserv01: Remaining Capacity Low : Yes cellserv01: Periodic Learn Required : No cellserv01: Battery state: cellserv01: Fully Discharged : No cellserv01: Fully Charged : Yes cellserv01: Relative State of Charge: 99 % cellserv01: Absolute state of charge: 21 % dcli -l root -g /root/all_group '/opt/MegaRAID/MegAaCli/MegaCli64 -AdpBbuCmd -a0' > BBU.out check ipmi: dcli -g ~/cell_group -l root -t '{ > ipmitool sunoem cli "show /SP/policy FLASH_ACCELERATOR_CARD_INSTALLED" | grep = ; MegaCli64 -LDInfo -Lall -aALL | grep 'Current Cache Policy' ; }' | tee /tmp/ExaCells.log

    Read the article

  • OpenVPN - Windows 8 to Windows 2008 Server, not connecting

    - by niico
    I have followed this tutorial about setting up an OpenVPN Server on Windows Server - and a client on Windows (in this case Windows 8). The server appears to be running fine - but it is not connecting with this error: Mon Jul 22 19:09:04 2013 Warning: cannot open --log file: C:\Program Files\OpenVPN\log\my-laptop.log: Access is denied. (errno=5) Mon Jul 22 19:09:04 2013 OpenVPN 2.3.2 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [IPv6] built on Jun 3 2013 Mon Jul 22 19:09:04 2013 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:04 2013 Need hold release from management interface, waiting... Mon Jul 22 19:09:05 2013 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'state on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'log all on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold off' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold release' Mon Jul 22 19:09:05 2013 Socket Buffers: R=[65536->65536] S=[65536->65536] Mon Jul 22 19:09:05 2013 UDPv4 link local: [undef] Mon Jul 22 19:09:05 2013 UDPv4 link remote: [AF_INET]66.666.66.666:9999 Mon Jul 22 19:09:05 2013 MANAGEMENT: >STATE:1374494945,WAIT,,, Mon Jul 22 19:10:05 2013 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) Mon Jul 22 19:10:05 2013 TLS Error: TLS handshake failed Mon Jul 22 19:10:05 2013 SIGUSR1[soft,tls-error] received, process restarting Mon Jul 22 19:10:05 2013 MANAGEMENT: >STATE:1374495005,RECONNECTING,tls-error,, Mon Jul 22 19:10:05 2013 Restart pause, 2 second(s) Note I have changed the IP and port no (it uses a non-standard port for security reasons). That port is open on the hardware firewall. The server logs are showing a connection attempt from my client: TLS: Initial packet from [AF_INET]118.68.xx.xx:65011, sid=081af4ed xxxxxxxx Mon Jul 22 14:19:15 2013 118.68.xx.xx:65011 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) How can I problem solve this & find the problem? Thx Update - Client config file: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. ;proto tcp proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote 00.00.00.00 1194 ;remote 00.00.00.00 9999 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\my-laptop.crt" key "C:\\Program Files\\OpenVPN\\config\\my-laptop.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Server config file: ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) ;local 00.00.00.00 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. std 1194 port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\server.crt" key "C:\\Program Files\\OpenVPN\\config\\server.key" # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh "C:\\Program Files\\OpenVPN\\config\\dh2048.pem" # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow differenta # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nobody # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I have changed IP's for security

    Read the article

  • OSB and Coherence Integration

    - by mark.ms.smith
    Anyone who has tried to manage Coherence nodes or tried to cache results in OSB, will appreciate the new functionality now available. As of WebLogic Server 10.3.4, you can use the WebLogic Administration Server, via the Administration Console or WLST, and java-based Node Manager to manage and monitor the life cycle of stand-alone Coherence cache servers. This is a great step forward as the previous options mainly involved writing your own scripts to do this. You can find an excellent description of how this works at James Bayer’s blog. You can also find the WebLogic documentation here.As of Oracle Service Bus 11gR1 (11.1.1.3.0), OSB now supports service result caching for Business Bervices with Coherence. If you use Business Services that return somewhat static results that do not change often, you can configure those Business Services to cache results. For Business Services that use result caching, you can control the time to live for the cached result. After the cached result expires, the next Business Service call results in invoking the back-end service to get the result. This result is then stored in the cache for future requests to access. I’m thinking that this caching functionality would be perfect for some sort of cross reference data that was refreshed nightly by batch. You can find the OSB Business Service documentation here.Result Caching in a dedicated JVMThis example demonstrates these new features by configuring a OSB Business Service to cache results in a separate Coherence JVM managed by WebLogic. The reason why you may want to use a separate, dedicated JVM is that the result cache data could potentially be quite large and you may want to protect your OSB java heap.In this example, the client will call an OSB Proxy Service to get Employee data based on an Employee Id. Using a Business Service, OSB calls an external system. The results are automatically cached and when called again, the respective results are retrieved from the cache rather than the external system.Step 1 – Set up your Coherence Server Via the OSB Administration Server Console, create your Coherence Server to be used as the results cache.Here are the configured Coherence Server arguments from the Server Start tab. Note that I’m using the default Cache Config and Override files in the domain.-Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=256m -Dtangosol.coherence.override=/app/middleware/jdev_11.1.1.4/user_projects/domains/osb_domain2/config/osb/coherence/osb-coherence-override.xml -Dtangosol.coherence.cluster=OSB-cluster -Dtangosol.coherence.cacheconfig=/app/middleware/jdev_11.1.1.4/user_projects/domains/osb_domain2/config/osb/coherence/osb-coherence-cache-config.xml -Dtangosol.coherence.distributed.localstorage=true -Dtangosol.coherence.management=all -Dtangosol.coherence.management.remote=true -Dcom.sun.management.jmxremote Just incase you need it, here is my Coherence Server classpath:/app/middleware/jdev_11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar: /app/middleware/jdev_11.1.1.4/modules/features/weblogic.server.modules.coherence.server_10.3.4.0.jar: /app/middleware/jdev_11.1.1.4/oracle_osb/lib/osb-coherence-client.jarBy default, OSB will try and create a local result cache instance. You need to disable this by adding the following JVM parameters to each of the OSB Managed Servers:-Dtangosol.coherence.distributed.localstorage=false -DOSB.coherence.cluster=OSB-clusterIf you need more information on configuring a remote result cache, have a look at the configuration documentration under the heading Using an Out-of-Process Coherence Cache Server.Step 2 – Configure your Business Service Under the respective Business Service Message Handling Configuration (Advanced Properties), you need to enable “Result Caching”. Additionally, you need to determine what the cache data will be keyed on. In the example below, I’m keying it on the unique Employee Id.The Results As this test was on my laptop, the actual timings are just an indication that there is a benefit to caching results. Using my test harness, I sent 10,000 requests to OSB, all with the same Employee Id. In this case, I had result caching disabled.You can see that this caused the back end Business Service (BS_GetEmployeeData) to be called for each request. Then after enabling result caching, I sent the same number of identical requests.You can now see the Business Service was only invoked once on the first request. All subsequent requests used the Results Cache.

    Read the article

  • Save the Date - Oracle Partner Community Forum: Exadata, Exalogic and Manageability, Vienna, 23-24 April 2013

    - by Javier Puerta
    Hardware and Software Engineered to Work Together .Ritu { font-family: Arial, Helvetica, sans-serif; } .Ritu { font-family: Arial, Helvetica, sans-serif; } .Ritu { font-family: Arial, Helvetica, sans-serif; } body,td,th { font-family: Arial, Helvetica, sans-serif; font-size: x-small; } .color { color: #F00; } .c { color: #F00; } .c { color: #F00; } .c { color: #000; font-size: xx-small; } .c a { color: #F00; } .c { color: #F00; } .cl { color: #F00; } .b { color: #000; font-size: xx-small; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .c { color: #F00; font-size: small; } .b { font-weight: bold; font-size: x-small; } .c { color: #F00; font-size: x-small; } .clr { color: #F00; } .c { color: #F00; } inside the Click Here The order you must follow to make the colored link appear in browsers. If not the default window link will appear 1. Select the word you want to use for the link 2. Select the desired color, Red, Black, etc 3. Select bold if necessary ___________________________________________________________________________________________________________________ Templates use two sizes of fonts and the sans-serif font tag for the email. All Fonts should be (Arial, Helvetica, sans-serif) tags Normal size reading body fonts should be set to the size of 2. Small font sizes should be set to 1 !!!!!!!DO NOT USE ANY OTHER SIZE FONT FOR THE EMAILS!!!!!!!! ___________________________________________________________________________________________________________________ -- Oracle PartnerNetwork | Account | Feedback SAVE THE DATE ORACLE PARTNER COMMUNITY FORUM: EXADATA, EXALOGIC AND MANAGEABILITY 23-24 APRIL 2013, VIENNA, AUSTRIA The 2013 event expands its scope to cover all the building blocks of the Cloud infrastructure: Exadata, Exalogic and Manageability! Dear partner I am delighted to announce the 2013 edition of the Exadata, Exalogic and Manageability Partner Community Forum for EMEA partners which will take place in Vienna, Austria, on April 23-24, 2013. After the experience of last year where we ran a joint Exadata and Manageability event, we received requests from many of you to add also Exalogic to the scope of the forum, and this way to cover the complete infrastructure architecture on the Exa platform. The continued market adoption of Exadata and Exalogic is being paralleled by a growth in the rate of projects sold and implemented by partners. Sharing customer cases and best-practices presented by other partners constitutes the core of this event. If you want to present an experience of your company around Exadata, Exalogic or Manageability that can be a learning experience for other partners, we still have some slots in the agenda. (Please contact Javier Puerta if you want to present.) Attending the Community Forum you will also have the opportunity to get Oracle’s insight on new products and market trends. And, of course, interact with the Oracle executives responsible for the Exadata, Exalogic and Manageability business. The atmosphere of beautiful Vienna will be the scenario of the event. Detailed venue and hotel booking information will be sent to you in January. Don't miss out on attending this key event! Save the date now - 23 & 24 April 2013, and watch out for your formal invitation coming soon. Kind regards, Javier Puerta Core Technology Partner Programs, Oracle EMEA E-Mail: [email protected] Jürgen Kress SOA Partner Adoption Oracle EMEA E-Mail: [email protected] Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact PBC | Legal Notices and Terms of Use | Privacy Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States

    Read the article

  • Save the Date - Oracle Partner Community Forum: Exadata, Exalogic and Manageability, Vienna, 23-24 April 2013

    - by Javier Puerta
    Hardware and Software Engineered to Work Together .Ritu { font-family: Arial, Helvetica, sans-serif; } .Ritu { font-family: Arial, Helvetica, sans-serif; } .Ritu { font-family: Arial, Helvetica, sans-serif; } body,td,th { font-family: Arial, Helvetica, sans-serif; font-size: x-small; } .color { color: #F00; } .c { color: #F00; } .c { color: #F00; } .c { color: #000; font-size: xx-small; } .c a { color: #F00; } .c { color: #F00; } .cl { color: #F00; } .b { color: #000; font-size: xx-small; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .c { color: #F00; font-size: small; } .b { font-weight: bold; font-size: x-small; } .c { color: #F00; font-size: x-small; } .clr { color: #F00; } .c { color: #F00; } inside the Click Here The order you must follow to make the colored link appear in browsers. If not the default window link will appear 1. Select the word you want to use for the link 2. Select the desired color, Red, Black, etc 3. Select bold if necessary ___________________________________________________________________________________________________________________ Templates use two sizes of fonts and the sans-serif font tag for the email. All Fonts should be (Arial, Helvetica, sans-serif) tags Normal size reading body fonts should be set to the size of 2. Small font sizes should be set to 1 !!!!!!!DO NOT USE ANY OTHER SIZE FONT FOR THE EMAILS!!!!!!!! ___________________________________________________________________________________________________________________ -- Oracle PartnerNetwork | Account | Feedback SAVE THE DATE ORACLE PARTNER COMMUNITY FORUM: EXADATA, EXALOGIC AND MANAGEABILITY 23-24 APRIL 2013, VIENNA, AUSTRIA The 2013 event expands its scope to cover all the building blocks of the Cloud infrastructure: Exadata, Exalogic and Manageability! Dear partner I am delighted to announce the 2013 edition of the Exadata, Exalogic and Manageability Partner Community Forum for EMEA partners which will take place in Vienna, Austria, on April 23-24, 2013. After the experience of last year where we ran a joint Exadata and Manageability event, we received requests from many of you to add also Exalogic to the scope of the forum, and this way to cover the complete infrastructure architecture on the Exa platform. The continued market adoption of Exadata and Exalogic is being paralleled by a growth in the rate of projects sold and implemented by partners. Sharing customer cases and best-practices presented by other partners constitutes the core of this event. If you want to present an experience of your company around Exadata, Exalogic or Manageability that can be a learning experience for other partners, we still have some slots in the agenda. (Please contact Javier Puerta if you want to present.) Attending the Community Forum you will also have the opportunity to get Oracle’s insight on new products and market trends. And, of course, interact with the Oracle executives responsible for the Exadata, Exalogic and Manageability business. The atmosphere of beautiful Vienna will be the scenario of the event. Detailed venue and hotel booking information will be sent to you in January. Don't miss out on attending this key event! Save the date now - 23 & 24 April 2013, and watch out for your formal invitation coming soon. Kind regards, Javier Puerta Core Technology Partner Programs, Oracle EMEA E-Mail: [email protected] Jürgen Kress SOA Partner Adoption Oracle EMEA E-Mail: [email protected] Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact PBC | Legal Notices and Terms of Use | Privacy Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States

    Read the article

  • Error X3650 when compiling shader in XNA

    - by Saikai
    I'm attempting to convert the XBDEV.NET Mosaic Shader for use in my XNA project and having trouble. The compiler errors out because of the half globals. At first I tried replacing the globals and just writing the variables explicitly in the code, but that garbles the Output. Next I tried replacing all the half with float vars, but that still garbles the resulting Image. I call the effect file from SpriteBatch.Begin(). Is there a way to convert this shader to the new pixel shader conventions? Are there any good tutorials for this topic? Here is the shader file for reference: /*****************************************************************************/ /* File: tiles.fx Details: Modified version of the NVIDIA Composer FX Demo Program 2004 Produces a tiled mosaic effect on the output. Requires: Vertex Shader 1.1 Pixel Shader 2.0 Modified by: [email protected] (www.xbdev.net) */ /*****************************************************************************/ float4 ClearColor : DIFFUSE = { 0.0f, 0.0f, 0.0f, 1.0f}; float ClearDepth = 1.0f; /******************************** TWEAKABLES *********************************/ half NumTiles = 40.0; half Threshhold = 0.15; half3 EdgeColor = {0.7f, 0.7f, 0.7f}; /*****************************************************************************/ texture SceneMap : RENDERCOLORTARGET < float2 ViewportRatio = { 1.0f, 1.0f }; int MIPLEVELS = 1; string format = "X8R8G8B8"; string UIWidget = "None"; >; sampler SceneSampler = sampler_state { texture = <SceneMap>; AddressU = CLAMP; AddressV = CLAMP; MIPFILTER = NONE; MINFILTER = LINEAR; MAGFILTER = LINEAR; }; /***************************** DATA STRUCTS **********************************/ struct vertexInput { half3 Position : POSITION; half3 TexCoord : TEXCOORD0; }; /* data passed from vertex shader to pixel shader */ struct vertexOutput { half4 HPosition : POSITION; half2 UV : TEXCOORD0; }; /******************************* Vertex shader *******************************/ vertexOutput VS_Quad( vertexInput IN) { vertexOutput OUT = (vertexOutput)0; OUT.HPosition = half4(IN.Position, 1); OUT.UV = IN.TexCoord.xy; return OUT; } /********************************** pixel shader *****************************/ half4 tilesPS(vertexOutput IN) : COLOR { half size = 1.0/NumTiles; half2 Pbase = IN.UV - fmod(IN.UV,size.xx); half2 PCenter = Pbase + (size/2.0).xx; half2 st = (IN.UV - Pbase)/size; half4 c1 = (half4)0; half4 c2 = (half4)0; half4 invOff = half4((1-EdgeColor),1); if (st.x > st.y) { c1 = invOff; } half threshholdB = 1.0 - Threshhold; if (st.x > threshholdB) { c2 = c1; } if (st.y > threshholdB) { c2 = c1; } half4 cBottom = c2; c1 = (half4)0; c2 = (half4)0; if (st.x > st.y) { c1 = invOff; } if (st.x < Threshhold) { c2 = c1; } if (st.y < Threshhold) { c2 = c1; } half4 cTop = c2; half4 tileColor = tex2D(SceneSampler,PCenter); half4 result = tileColor + cTop - cBottom; return result; } /*****************************************************************************/ technique tiles { pass p0 { VertexShader = compile vs_1_1 VS_Quad(); ZEnable = false; ZWriteEnable = false; CullMode = None; PixelShader = compile ps_2_0 tilesPS(); } }

    Read the article

  • Java Mission Control for SE Embedded 8

    - by kshimizu-Oracle
    ????????????Java???·????????????Java Mission Control????Java SE 8 Embedded???????????Java????????????????Java Mission Control?????????JVM?Java????????? CPU?????????? ???????? ?????????? ???????UI???????????????? ????????????????????????????????????????????????????????????(Java Mission Control????????????????????????????????) 1. Java Mission Control??????? Java?????????????? JMX?????(MBean????) ? Java SE Embedded 8?Compact 3?Full JRE?????(???Minimal?VM??????) ????·???? ? Java SE Embedded 8?Full JRE??????(???Minimal?VM??????) ? ???????Java ME 8??????????????? 2. ???????JVM?????     2.1. JMX?????(MBeans???)????? >java -Dcom.sun.management.jmxremote=true               -Dcom.sun.management.jmxremote.port=7091                # ????????              -Dcom.sun.management.jmxremote.authenticate=false   # ????              -Dcom.sun.management.jmxremote.ssl=false                  # SSL??              -jar appliation.jar ? ??????????????????????JVM??????????????????? "-Djava.rmi.server.hostname=192.168.0.20"                     # ?????????IP????/???? ???????????(http://docs.oracle.com/javase/7/docs/technotes/guides/management/faq.html)?5???????????????????????     2.2. ????·????????? JVM????????????????????? "-XX:+UnlockCommercialFeatures -XX:+FlightRecorder" 3. Java Mission Control?????? JDK????????jmc??????????? >"JDK_HOME"/bin/jmc 4. Java Mission Control??JVM??????  Java Mission Control?????????????????????????????????????? - ????????????IP????·??????????????????JVM????????????????????? - ??????????(????·?????)?????????? - ??????????OK??? ????????????????????????????????????????????????????????????Java?????Java Mission Control???????? ??URL) http://www.oracle.com/technetwork/jp/java/javaseproducts/mission-control/index.html http://www.oracle.com/technetwork/jp/java/javaseproducts-old/mission-control/java-mission-control-wp-2008279-ja.pdf http://www.oracle.com/technetwork/java/embedded/resources/tech/java-flight-rec-on-java-se-emb-8-2158734.html

    Read the article

  • ??????????? - Java SE Embedded 8

    - by kshimizu-Oracle
    Java?OS??????1?????????????????????????????????3?????????????? HEAP: Java????????????????????????????????? NON-HEAP: NON-HEAP????JVM???????????????????Code Cache?Metaspace???2????????????? Code Cache: ????JIT??????????????????????????? Metaspace: HEAP??????????????????????????   JavaVM??????????: VM?????????????????? ??????????????? ????????????????????????????????????????????????????????????????????????? HEAP?Java Mission Control???????????????????? (????)? ????Java SE?????????????API????????????????????????????????????? Mission Control?????API?????????????????????????????????API??????????????? HEAP???????????? VM????????"-Xmx"???????????????? java.lang.Runtime.maxMemory(); ?????HEAP????????? ?????VM????????"-Xms"? ????????????? "-Xms"???????"-Xmx"?????????? java.lang.Runtime.totalMemory(); ???????????HEAP????????????? java.lang.Runtime.freeMemory(); ??NON-HEAP???????????? API??????????? Java Mission Control?????????? ????????????Java Mission Control??????????????????????? ????"NON_HEAP"?????????NON-HEAP?????? ???? HEAP????NON-HEAP?????????????? Java VM???????????????????????????????????????? ?????????????????????????????????? ????HEAP/NON-HEAP?????????????????????????? OS?????????????? Linux???????procfs?Java??????????????????? (VmHWM or VmRSS) ????? ????HEAP/NON-HEAP??????????????????????????? ?????????????????? ??????JVM?????????????????? ?????????????????JVM???????????????????? ???JVM?????? ????????????? Embedded??JVM?????????? ??Embedded???Oracle JVM??????CPU????????????????????????????????????????? ??????CPU??????????????????????????????????????? Minimal/Client/Server??JVM???????????????? ????JVM??????????????????? ??????Compact????????????????? ? 2 - 3?????? Concept Guide (http://docs.oracle.com/javase/8/embedded/embedded-concepts/basic-concepts.htm) ???????? ??JVM??????????? ????????????????????? -Xms: ??????????? ?????????? ?????????????????????????????????????????????????? -Xmx: ??????????? -XX:ReservedCodeCacheSize: Code Cache??????? ?) JIT??????????????Code Cache????????????0???????? -Xint: JIT??????????? ????????????? JIT?????????????????????? ????????????????? -Xss: ???????????????????? ????????????????????????? ????????????????????????????? -XX:CompileThreshold: JIT?????????????????????????????????? ?????????????????????? ????????? ?????????????????? Code Cache?????????? ?????????? ????????????????????? ????????????????????????? ??????????????????????? ?????????????????????

    Read the article

  • Why does Silverlight 4 ClientHttp WebRequest prompt the user for a login and password?

    - by James Cadd
    One of the new features of the client http stack in Silverlight 4 is the ability to supply network credentials. When I use this feature Windows shows a "Windows Security" message box that prompts the user for a login and password (text in the box is "The server xx at xx requires a username and password. Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection)."). I'm setting the login and password as shown below so I'm not sure why this is displayed. My code is: var request = WebRequestCreator.ClientHttp.Create(new Uri("http://myserver:8080/gui/?list=1")); request.Credentials = new NetworkCredential("login", "password"); request.BeginGetResponse(new AsyncCallback(OnRequestComplete), request); If I enter the username and password into the messagebox the request completes successfully. For a number of reasons I'd rather prompt the user for the login and password so I'd like to avoid the messagebox if possible. My setup is Silverlight 4 final, VS 2010 final, Windows 7 x86. The application is out of browser with elevated permissions.

    Read the article

  • dojox.grid.DataGrid populated from Servlet

    - by jeff porter
    I'd like to hava a Dojo dojox.grid.DataGrid with its data from a servlet. Problem: The data returned from the servlet does not get displayed, just the message "Sorry, an error has occured". If I just place the JSON string into the HTML, it works. ARRRRGGH. Can anyone please help me! Thanks Jeff Porter Servlet code... public void doGet(HttpServletRequest req, HttpServletResponse resp) { res.setContentType("json"); PrintWriter pw = new PrintWriter(res.getOutputStream()); if (response != null) pw.println("[{'batchId':'2001','batchRef':'146'}]"); pw.close(); } HtmL code... <div id="gridDD" dojoType="dojox.grid.DataGrid" jsId="gridDD" style="height: 600x; width: 100%;" store="ddInfo" structure="layoutHtmlTableDDDeltaSets"> </div> var rawdataDDInfo = ""; // empty at start ddInfo = new dojo.data.ItemFileWriteStore({ data: { identifier: 'batchId', label: 'batchId', items: rawdataDDInfo } }); <script> function doSelectBatchsAfterDate() { var xhrArgs = { url: "../secure/jsonServlet", handleAs: "json", preventCache: true, load: function(data) { var xx =dojo.toJson(data); var ddInfoX = new dojo.data.ItemFileWriteStore({data: xx}); dijit.byId('gridDD').setStore(ddInfoX); }, error: function(error) { alert("error:" + error); } } //Call the asynchronous xhrGet var deferred = dojo.xhrGet(xhrArgs); } </script> <img src="go.gif" onclick="doSelectBatchsAfterDate();"/>

    Read the article

  • Duration of Excessive GC Time in "java.lang.OutOfMemoryError: GC overhead limit exceeded"

    - by jilles de wit
    Occasionally, somewhere between once every 2 days to once every 2 weeks, my application crashes in a seemingly random location in the code with: java.lang.OutOfMemoryError: GC overhead limit exceeded. If I google this error I come to this SO question and that lead me to this piece of sun documentation which expains: The parallel collector will throw an OutOfMemoryError if too much time is being spent in garbage collection: if more than 98% of the total time is spent in garbage collection and less than 2% of the heap is recovered, an OutOfMemoryError will be thrown. This feature is designed to prevent applications from running for an extended period of time while making little or no progress because the heap is too small. If necessary, this feature can be disabled by adding the option -XX:-UseGCOverheadLimit to the command line. Which tells me that my application is apparently spending 98% of the total time in garbage collection to recover only 2% of the heap. But 98% of what time? 98% of the entire two weeks the application has been running? 98% of the last millisecond? I'm trying to determine a best approach to actually solving this issue rather than just using -XX:-UseGCOverheadLimit but I feel a need to better understand the issue I'm solving.

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >