Search Results

Search found 45949 results on 1838 pages for 'super tomtom'.

Page 260/1838 | < Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >

  • How to check DVD region settings in Window 7

    - by jmatthias
    I have installed Windows 7 on my laptop. When I put a movie in the DVD drive, the video player starts up and tells me 'THIS DISC IS NOT FORMATTED TO PLAY IN THIS REGION'. I have changed the DVD region a few times in the past but while I was in Windows XP I changed the region in Region 1. I cannot find how to check the DVD region setting in Windows 7 (it's not located on the hard properties page of the DVD anymore. Does anybody know how to check the DVD region in Windows 7? Update: If I connect an external USB DVD drive I can see the DVD region tab on the hardware properties dialog. I guess there is some compatibility problem with my internal DVD drive and Windows 7 (as I said I was able to inspect/change the DVD region in Windows XP). Solution: I think I had used LtnRPC in the past to remove the region from my DVD drive. It looks like Windows 7 does not like region free DVD drives (at least mine anyway). I was able to use LtnRPC to reset the region back to 1. I can now see the region tab on the DVD drives hardware properties.

    Read the article

  • Laptop Bios password removing !!

    - by Mr-Right
    hi, I have a dell D620 (Laptop), My younger brother set password by mistake on BIOS Setup and forgot it. Now I want to reset BIOS Setup program so that password can be reset.Any other alternative is appriciated as well. thanks in advance.

    Read the article

  • Why do Ping and Dig provide different IP address than nslookup?

    - by user1032531
    When pinging my domain name which points to my home public IP from two different servers on my LAN, it shows them pinging different IP. Further investigation shows dig and nslookup providing different results. See below. A little history. My IP used to be 11.22.33.444 and is hosted by Comcast. I changed routers, and it somehow got changed to 55.66.77.888. I've since updated my 1and1 domain name to point to the 55.66.77.888. desktop is a basic server, runs the web server, and connects wirelessly to my LAN. laptop is a GUI and connected via CAT5. Both operate Centos6.4. My old router was a D-Link, and used their "Virtual Server" feature to pass port 80 to desktop. My new router is a Linksys, and I use their "Port Forwarding" feature to pass port 80 to desktop (however, I haven't gotten this part working yet). What is going on??? Why the different IPs? Obviously, it most somehow be stored on the server, but why does the actual machine even know the public IP since it is on a LAN? How do I purge the old IP? [root@desktop etc]# dig +short myDomain.com 11.22.33.444 [root@desktop etc]# nslookup www.myDomain.com Server: 8.8.8.8 Address: 8.8.8.8#53 Non-authoritative answer: Name: www.myDomain.com Address: 55.66.77.888 [root@desktop etc]# dig myDomain.com ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.6 <<>> myDomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 13822 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myDomain.com. IN A ;; ANSWER SECTION: myDomain.com. 16031 IN A 11.22.33.444 ;; Query time: 21 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Mon Oct 21 04:36:52 2013 ;; MSG SIZE rcvd: 44 [root@desktop etc]# [root@laptop ~]# dig +short myDomain.com 55.66.77.888 [root@laptop ~]# nslookup www.myDomain.com Server: 192.168.0.1 Address: 192.168.0.1#53 Non-authoritative answer: Name: www.myDomain.com Address: 55.66.77.888 [root@laptop ~]#

    Read the article

  • Extract InstallSHIELD's CAB files when there is no HDR files?

    - by user433531
    layout.bin setup.lid _sys1.cab _user1.cab DATA.TAG data1.cab SETUP.INI setup.ins _INST32I.EX_ SETUP.EXE _ISDEL.EXE _SETUP.DLL lang.dat os.dat I want to extract an InstallSHIELD's 5 install package and above is the list of files in "data1" folder. However there is no *.hdr files so I can't extact the CAB files using tools on Internet, even though the package is still able to be installed without any error. Can anybody give me a suggestion for this please?

    Read the article

  • Windows 8 Media Center Pack Install Fails with DoTransmogrify failed due to error 0x80070011

    - by Conrad Frix
    When I attempt to use Add Features to install the Windows 8 Media Center pack I get the "Something Went Wrong" Message Checking %localappdata%\Microsoft\Windows\Windows Anytime Upgrade\Upgrade.log I can see the following error block 2012-10-27 18:43:13, Error WAU DoTransmogrify failed due to error 0x80070011. 2012-10-27 18:43:13, Error WAU UpgradeSKU failed. Exiting. 2012-10-27 18:43:13, Error WAU The worker process exited unexpectedly 2012-10-27 18:43:13, Error WAU Something went wrong 2012-10-27 18:43:13, Error WAU Close this wizard and try again. My understanding is that 0x80070011 means Error_Not_Same_Device. I think this may be related to the fact that C:\Users is a junction point to D:\Users Do I have to move my users directory back? Is there a workaround?

    Read the article

  • Windows 7 backup and restore: Is each backup incremental or complete?

    - by Margaret
    I have a computer that's been taking backups using Windows 7's Backup and Restore feature. However, I now need to reclaim hard disk space, and am trying to figure out what I can safely delete. When I go into the Backup and Restore options on the machine, it shows several backups. Is it safe to delete the older ones? Or is it an incremental backup, that means that files not changed since before the last backup would then be lost?

    Read the article

  • Where is my free space?

    - by Andrey
    A week ago I got a low disk space warning on my Vista x64 Ultimate box - 60 Mb free on the disk C; I cleaned up some downloaded msdn images and got 20 Gb freed up. Three days ago I got another notification, it looked suspicious but I didnt have time to deal with it and just moved some heavy stuff to another drive to free up about 17 Gb.... Today morning - 53Mb left on drive C, again! Now it looks really suspecious, so I downloaded TreeSize to see what's taking up the space, just to see it reporting only 121 GB out of 200 GB used, in other words I suppose to have about 79 Gb free. Then I went to Folder Options, enabled viewing of system and hidden files, rerun teh tool to see another 5 Gb added (which is expected). Then I open disk C in windows explorer, select all and right click Properties, to see it reporting teh same amount of files - 126 Gb. But when I look at Drive C properties, it reports that 200GB of 200 Gb are taken. I just scanned the drive with two different antiviruses - Symantec and AVG and found no viruses... I'm a little confused at this point, any ideas where is my free space, woudl be highly appreciated! Thank you! Andrey

    Read the article

  • Moving domain and keeping IMAP email - Linux Evolution, Mac Mail

    - by Douglas Squirrel
    This question is about keeping email during a server move, where the clients are Linux (me) and Mac (my wife) using IMAP. I receive email at [email protected] using a webmail service that my hosting company (1and1) provides. I read it via IMAP in evolution, so I should have copies of all the emails on my local machine. I have just moved mydomain.com from one type of account to another, and the hosting company don't move my existing email on the server when I do this - I assume they move my account to a different mailserver, and don't choose to provide a migration path for the email to move too (yes, this is annoying). Before migrating, I backed up Evolution (File - Backup settings) and did a spot-check in the evolution-backup.tar.gz file to be sure that my mail was in there. After migrating, I restored (File - Restore settings) and had hoped that I would see all my mail again. Unfortunately, Evolution just shows me new mail sent to the account, not the old mail. Is there a way to get the old mail back in the mailserver, or at least displaying in Evolution, as it was before the move? If not, can I read it in some convenient way, e.g. in Evolution offline or in a text file (then I can pick the mails I really want to keep and resend them to myself)? Also, I am about to do a similar move for my wife's domain, [email protected]. She reads her mail on a Mac using IMAP to Apple Mail. Is there anything I can do to make the move smooth for her? (I have backed up [her user]/Library/Mail already, but not sure what to do once the move is done.)

    Read the article

  • What happens when a server has too many requests?

    - by eSKay
    I am wondering why websites crash at all. If a server has too many requests, it might queue up the request in its waiting lists and serve it when all the earlier requests have been served. That means that the request for the website will be taken care of, although it may take some more time than expected. Then, how do websites crash due to server overload?

    Read the article

  • An I/O operation initiated by the Registry

    - by sebastian
    Hi, I keep getting this error on my PC: An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry. I've seen other cases on the web, but there is one difference. this error won't go away with an restart. can someone help? thanks, Sebastian

    Read the article

  • Cisco VPN stops Windows 7 Browsing

    - by Sharjeel Sayed
    My browsing and other 'internet' activity (dropbox,digsby etc) halts when I connect to my office VPN using Cisco Systems VPN client Version 5.0.04.0300 on my Windows 7 Ultimate.The only option left for me at this time is to use my office proxy to enable the connection back. I tried doing the ucheck "Use default gateway on remote network" solution as mentioned on a previous post Windows 7 VPN stops web browser but I don't see that option on the properties of "Cisco systems VPN adapter" connection properties. Here is the screenshot

    Read the article

  • Boot Vista x64 with both ICH8 and ICH10 AHCI support

    - by adurity
    I have a situation where I need to boot Windows Vista 64-bit from both a ICH10 and ICH8 AHCI SATA controller. Currently, it is setup to boot from the ICH10, but when I try booting with the ICH8, I get the famed Windows STOP 7B BSOD. How can I add the ICH8 driver so that I can work around this BSOD and boot the system? I have updated to the latest Intel AHCI driver (8.9.0.1023 as of this post) which is supposed to support both chipsets, but I feel I am missing something.

    Read the article

  • Mobile Broadband Strategy in USA [closed]

    - by AJM
    I'm looking to set up mobile broadband so I have an internet connection that will work wherever I travel in the US. I'm looking for recommendations on suppliers but also advice on whether its unrealsitic to think that we I could upload data to a cloud based backup server (like Amazon etc) over this link.

    Read the article

  • Dell PR03X port replicator and DisplayPort to DVI adapter not detecting second monitor

    - by yothenberg
    I have a Dell M4400 connected to a PR03X port replicator/docking station. I use the DVI port to connect it to a first Dell 2208WFP monitor and I'm trying to use a DisplayPort-to-DVI adapter to connect it to a second Dell 2208WFP monitor. The second monitor, connected via the DisplayPort-to-DVI adapter immediately goes into sleep mode and the laptop doesn't detect it. What is really weird is that it did detect it the first time I plugged it in but after I unplugged the monitor and plugged it back in it stopped working. I swapped the monitors round and it detected them both but after unplugging the monitor connected via the DisplayPort-to-DVI and plugging it in again it stopped working. Both monitors work if plugged in directly to the DVI port. Is there some way to force re-detection? Any ideas?

    Read the article

  • Synergy 1.4.2 Linux server, OSX client, Media/Function key mapping issues

    - by at165dB
    I'm using an Apple bluetooth keybord to control my Linux synergy server. SSH tunneling, Mouse, Keyboard, and Copy&Paste all work. Linux sees all the media/app keys that are on top of the F# keys correctly. However if I press any of those keys while controlling my OSX client, nothing happens on the client. Running synergys with -d DEBUG1 I can see the following keycode info: Pressing the "dim monitor" key that also serves as F1 generates: new mask: 0x2000 event: KeyPress code=232, state=0x0010 new mask: 0x2000 If I press "fn" and the same key, I can see it sending what I'm assuming is an F1: event: KeyPress code=67, state=0x0010 onKeyDown id=61374 mask=0x2000 button=0x0043 send key down to "foo.cisco.com" id=61374, mask=0x2000, button=0x0043 new mask: 0x2000 event: KeyRelease code=67, state=0x0010 onKeyUp id=61374 mask=0x2000 button=0x0043 send key up to "foo.cisco.com" id=61374, mask=0x2000, button=0x0043 I'm guessing I need to tweak my synergy.conf so that the server sends keys that it currently isn't. I'm also not sure what I need to do to tweak the keys that it is sending, but are not working. Below are all the other keys I'm having issues with. Does anyone have any idea how I can enable their functionality? brighten monitor: new mask: 0x2000 event: KeyPress code=233, state=0x0010 new mask: 0x2000 expose: new mask: 0x2000 event: KeyPress code=128, state=0x0010 new mask: 0x2000 dashboard: new mask: 0x2000 event: KeyPress code=212, state=0x0010 new mask: 0x2000 dim keyboard: new mask: 0x2000 event: KeyPress code=237, state=0x0010 new mask: 0x2000 brighten keyboard: new mask: 0x2000 event: KeyPress code=238, state=0x0010 new mask: 0x2000 rewind: event: KeyPress code=173, state=0x0010 onKeyDown id=57521 mask=0x2000 button=0x00ad send key down to "foo.cisco.com" id=57521, mask=0x2000, button=0x00ad new mask: 0x2000 event: KeyRelease code=173, state=0x0010 onKeyUp id=57521 mask=0x2000 button=0x00ad send key up to "foo.cisco.com" id=57521, mask=0x2000, button=0x00ad play/pause: event: KeyPress code=172, state=0x0010 onKeyDown id=57523 mask=0x2000 button=0x00ac send key down to "foo.cisco.com" id=57523, mask=0x2000, button=0x00ac new mask: 0x2000 event: KeyRelease code=172, state=0x0010 onKeyUp id=57523 mask=0x2000 button=0x00ac send key up to "foo.cisco.com" id=57523, mask=0x2000, button=0x00ac fastforward: event: KeyPress code=171, state=0x0010 onKeyDown id=57520 mask=0x2000 button=0x00ab send key down to "foo.cisco.com" id=57520, mask=0x2000, button=0x00ab new mask: 0x2000 event: KeyRelease code=171, state=0x0010 onKeyUp id=57520 mask=0x2000 button=0x00ab send key up to "foo.cisco.com" id=57520, mask=0x2000, button=0x00ab mute: event: KeyPress code=121, state=0x0010 onKeyDown id=57517 mask=0x2000 button=0x0079 send key down to "foo.cisco.com" id=57517, mask=0x2000, button=0x0079 new mask: 0x2000 event: KeyRelease code=121, state=0x0010 onKeyUp id=57517 mask=0x2000 button=0x0079 send key up to "foo.cisco.com" id=57517, mask=0x2000, button=0x0079 volume down: onKeyDown id=57518 mask=0x2000 button=0x007a send key down to "foo.cisco.com" id=57518, mask=0x2000, button=0x007a new mask: 0x2000 event: KeyRelease code=122, state=0x0010 onKeyUp id=57518 mask=0x2000 button=0x007a send key up to "foo.cisco.com" id=57518, mask=0x2000, button=0x007a volume up: event: KeyPress code=123, state=0x0010 onKeyDown id=57519 mask=0x2000 button=0x007b send key down to "foo.cisco.com" id=57519, mask=0x2000, button=0x007b new mask: 0x2000 event: KeyRelease code=123, state=0x0010 onKeyUp id=57519 mask=0x2000 button=0x007b send key up to "foo.cisco.com" id=57519, mask=0x2000, button=0x007b eject: event: KeyPress code=169, state=0x0010 onKeyDown id=57345 mask=0x2000 button=0x00a9 send key down to "foo.cisco.com" id=57345, mask=0x2000, button=0x00a9 new mask: 0x2000 event: KeyRelease code=169, state=0x0010 onKeyUp id=57345 mask=0x2000 button=0x00a9 send key up to "foo.cisco.com" id=57345, mask=0x2000, button=0x00a9

    Read the article

  • Why would ssh fail to expand %h variable in .ssh/config?

    - by Zoran
    Why would ssh fail to expand %h from .ssh/config? This used to work and still works except on a RHEL box. Looking for what the origin of this could be. Is there a setting somewhere that tells ssh to not expand %h? I have something like this in my .ssh/config: Host *.foo HostName %h.mydomain.com On the RHEL box where this doesn't work, I get this: $ ssh -vvvv bar.foo OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /home/zsimic/.ssh/config debug1: Applying options for *.foo debug1: Applying options for *.foo debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 ssh: Could not resolve hostname %h.mydomain.com: Name or service not known

    Read the article

  • Macbook Pro Hard Drive won't shop up on disk startup

    - by Kristal
    I have a macbook pro from 2007. It came with an installation CD for 10.4.8. The first problem is that it won't even recognize the installation CD even though the CD seems perfectly fine. So I used another installation CD just to get me to the Disc Utility dialogue box. I went through the steps to erase the hard drive. However when I attempted to reboot the machine using Disc Startup there was no option for me to select the hard drive. Of course, since I don't have the appropriate installation disk in it won't let me install anything. What are my options? Do I need to ask Apple to send me a new installation CD for this computer? And why wouldn't the hard drive show up in the Startup options?

    Read the article

  • Playing an Online mp3

    - by Mohsen
    I have a problem with playing online mp3s. I'm using latest version of javazoom's jlayer and basicplayer. Here is the exception: Caused by: javazoom.jlgui.basicplayer.BasicPlayerException: java.io.EOFException at javazoom.jlgui.basicplayer.BasicPlayer.initAudioInputStream(Unknown Source) at javazoom.jlgui.basicplayer.BasicPlayer.open(Unknown Source) ... 12 more Caused by: java.io.EOFException at java.io.DataInputStream.readInt(DataInputStream.java:375) at com.sun.media.sound.WaveFileReader.getFMT(WaveFileReader.java:244) at com.sun.media.sound.WaveFileReader.getAudioFileFormat(WaveFileReader.java:85) at javax.sound.sampled.AudioSystem.getAudioFileFormat(AudioSystem.java:985) at javazoom.jlgui.basicplayer.BasicPlayer.initAudioInputStream(Unknown Source) ... 15 more My java is 1.6.0_16. Certain files cannot be player through the Internet. I have a set of mp3s, playing one after the other. Randomly one mp3 doesn't work throwing above exception. Some mp3s can be played by calling again play() method if javazoom's basicplayer, but others can never be played online. I was able to find this post but I doubt if this really relates to my directx version or something. Mohsen

    Read the article

  • DBAN Hangs at PCI (sysfs)

    - by David
    I'm running Derik's Boot and Nuke 2.2.6 (beta). When I get to a blue screen(Not BSOD) the following is printed. Derik's Boot and Nuke 2.2.6 (beta) is starting. Waiting for USB devices to register..........................done. PCI (sys) After that, it just sits there forever... Any advice, other than an older version of DBAN? I have gotten this version of DBAN to work on an older machine before.

    Read the article

  • external hard drive is no longer recognized, gives buffer I/O errors

    - by BioGeek
    Hi all, The external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive. When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message. [19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21 [19712.145347] usb 2-2: configuration #1 chosen from 1 choice [19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices [19712.147514] usb-storage: device found at 21 [19712.147519] usb-storage: waiting for device to settle before scanning [19717.148978] usb-storage: device scan complete [19717.149527] scsi 25:0:0:0: Direct-Access ST350082 0AS PQ: 0 ANSI: 2 CCS [19717.151020] sd 25:0:0:0: Attached scsi generic sg2 type 0 [19717.151685] sd 25:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [19717.160402] sd 25:0:0:0: [sdb] Write Protect is off [19717.160412] sd 25:0:0:0: [sdb] Mode Sense: 34 00 00 00 [19717.160418] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165685] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165691] sdb: sdb1 [19719.171808] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19719.171818] sd 25:0:0:0: [sdb] Attached SCSI disk [19737.430998] sd 25:0:0:0: [sdb] Unhandled sense code [19737.431007] sd 25:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [19737.431016] sd 25:0:0:0: [sdb] Sense Key : Medium Error [current] [19737.431027] sd 25:0:0:0: [sdb] Add. Sense: Unrecovered read error [19737.431038] end_request: I/O error, dev sdb, sector 6160463 [19737.431050] Buffer I/O error on device sdb1, logical block 6160400 [19737.431060] Buffer I/O error on device sdb1, logical block 6160401 [19737.431067] Buffer I/O error on device sdb1, logical block 6160402 [19737.431075] Buffer I/O error on device sdb1, logical block 6160403 [19737.431082] Buffer I/O error on device sdb1, logical block 6160404 [19737.431088] Buffer I/O error on device sdb1, logical block 6160405 [19737.431096] Buffer I/O error on device sdb1, logical block 6160406 [19737.431102] Buffer I/O error on device sdb1, logical block 6160407 [19737.431114] Buffer I/O error on device sdb1, logical block 6160408 [19737.431121] Buffer I/O error on device sdb1, logical block 6160409 [19737.712183] sd 6:0:0:0: [sdb] Unhandled sense code [19737.712191] sd 6:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [19737.712200] sd 6:0:0:0: [sdb] Sense Key : Hardware Error [current] [19737.712210] sd 6:0:0:0: [sdb] Add. Sense: No additional sense information [19737.712222] end_request: I/O error, dev sdb, sector 0 [19737.712232] Buffer I/O error on device sdb, logical block 0 Neither does the external drive show when I use fdisk: jeroen@phalacrocorax:~$ sudo fdisk -l [sudo] password for jeroen: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000341ad Device Boot Start End Blocks Id System /dev/sda1 * 1 18714 150320173+ 83 Linux /dev/sda2 18715 19457 5968147+ 5 Extended /dev/sda5 18715 19457 5968116 82 Linux swap / Solaris` I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external harddisk. Do I have any other options?

    Read the article

  • 2 ATI Radeon HD 5870 (crossfire): Intermittent loud fan and non-functioning secondary card

    - by Merritt
    Installed 2 5870s. Left off the left side panel of my case(cooler master haf x), started my computer, installed the drivers and set up the crossfire... yada yada yada... everything worked fine. Then turned off computer, put left side panel back on, turned on computer, and heard a very loud buzzing (asssuming it was a gpu fan). Checked status of cards (in Windows 7) and the secondary card did not appear. Turned off the computer, took off left side panel, jiggled power connectors into secondary card, then turned the computer back on, and it worked again. Put the panel on, turned on computer, worked. Sometime later, turned on computer, and there's that loud fan sound again. What gives?

    Read the article

  • In org-mode, is there a way to show the number of undone todo items in a subtree when collapsed?

    - by Gerry Lufwansa
    For example, suppose I have this document: * category 1 ** TODO item 1.1 ** not a todo item ** DONE a done todo item ** TODO item 1.4 * category 2 ** not a todo item ** not a todo item * category 3 ** DONE done item * category 4 ** TODO item 4.1 *** TODO subitem 4.1.1 *** TODO subitem 4.1.2 When collapsed, I'd like to see something like: * category 1 (2)... * category 2 (0)... * category 3 (2)... * category 4 (3)...

    Read the article

  • Why am I having DNS problems going through Network Solutions DNS to Amazon AWS?

    - by BestPractices
    Network Solutions appears to have an issue with AWS hostnames. This AWS ELB has been out there for months and is resolvable from every major DNS provider but network solutions. Any idea as to why? WORKING (4.2.2.2 DNS) $ nslookup testloadbalancer-1761726467.us-west-2.elb.amazonaws.com Server: 4.2.2.5 Address: 4.2.2.5#53 Non-authoritative answer: Name: testloadbalancer-1761726467.us-west-2.elb.amazonaws.com Address: 50.112.251.201 NOT WORKING (Network Solutions DNS) $ nslookup testloadbalancer-1761726467.us-west-2.elb.amazonaws.com ns1.worldnic.com Server: ns1.worldnic.com Address: 205.178.190.1#53 ** server can't find testloadbalancer-1761726467.us-west-2.elb.amazonaws.com.localhost: SERVFAIL

    Read the article

< Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >