Search Results

Search found 45949 results on 1838 pages for 'super tomtom'.

Page 257/1838 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >

  • How do i have 4GB of video memory with a 1GB video card?

    - by Tomas Spc Yaczik
    I ran the direct X diagnostic tool to take a look at my graphics capabilities and its telling me that the approximate video memory is clocked in at 4096MB. That doesn't make any sense, how is that possible? The only things that i can think of were that DirectX was inaccurate so i looked at the graphics statistics of my computer on CPU-Z which was included with the motherboard and that's telling me i have "negative" 1988MB. Not only is that not 4096MB, but its giving me a negative number and i know for a fact that you can't have a negative amount of memory???!!! The only things i can think of that would be amplifying my video memory output is the PCIe 3.0 bus, or that the motherboard is somehow including the on board video chip set with the video card which only then is only 2GB of video memory, which still has to be being amplified by something. Any suggestions?

    Read the article

  • What happened to my "Predefined rules" in Windows Firewall? How can I get them back?

    - by Cheeso
    Windows Firewall Advanced Settings in Windows 7 , has predefined rule sets. When I click the "Add Rule..." button in my Windows 7 Ultimate install, it looks like this: But, on a machine I have that runs Windows 7 Home Premium, when I click "Add Rule...", the "predefined rules" option is greyed out. Like this: Is this expected? Does Win7 Home Premium NOT have predefined rules? How can I get the rules back?

    Read the article

  • graphics cards with no HDMI output

    - by Noam Gal
    I am currently looking at Gainward GTX260 896MB GS GLH, but I've seen it also on the x275 version - the card doesn't have an HDMI output, only two dvi and one tv out (s-video?). They claim they support HDMI using a dvi-HDMI converter. Will I get a true high definition quality on my TV (assuming it supports it) like that? Or is it not as good, and I should stick to cards that have an HDMI output (ATI), or pay way too much for x295? What about connecting the audio? The x260 comes with an internal spdif cable - does that mean I can connect my soundcard to my graphics card, and have the audio come out through the dvi, and into the HDMI cable? Or am I mixing it all up here, and I have to somehow connect the sound to the TV using a seperate cable (Hoping it has a seperate audio-in for the HDMI channel)?

    Read the article

  • wondering how much data bandwidth can a 3G gsm cell tower can support?

    - by Karim
    i was always wondering how many simaltinues users can a 3G tower supports with its data rates? i mean they advertize 28.8Mb/Sec for the 3G Data but in reallity if a lot of people use it say 10 , it wont give 288Mb/Sec bandwidth. i didnt find anywhere where such information is published so i thought to ask here. dont know why the cell operators keep it such a secret :)

    Read the article

  • How can I download a file directly to a web server?

    - by matt
    I'd like to download files directly to a hosted server, whether it's one I set up myself or a hosted service like Dropbox. For example, when I download a podcast, instead of downloading it to my computer then uploading it to the server, how can I have it download directly to the cloud. My interest here is reducing the traffic I'm using over a metered data plan on my laptop, so I don't want my computer acting as a physical intermediary caching the file. Ideally, there would be some way for me to have a download link and tell it to go directly to my server. How can I accomplish this? I realize that this question is potentially involving a "webapp" and it is potentially involving "server administration" and since my goal is to cut my computer out of the loop I can see people saying this is off-topic and should be on another site. My issue is this: I don't know if this is going to be a webapp solution or a server solution but I do know regardless I'm going to be using a computer to get it done and I am replacing a function that's currently done on my computer so I figured I'd ask it here. If I was wrong and this definitely should be at webapps feel free to let me know or just migrate it.

    Read the article

  • Netgear WG311 v2 not identified on Windows 7

    - by iamrohitbanga
    I have a Netgear WG311 v2 wireless card. It was working fine on vista. Now I have installed Windows 7 and the device is not identified. Device Manager shows it as an Ethernet card. When I update the driver using the list provided with the Windows distribution. It shows it under Wireless devices in Device Manager but it says device cannot start code 10. Any idea on how to install it.

    Read the article

  • Nvidia Ion HDMI output problems with Acer Revo

    - by Techfeeler
    I bought an Acer Revo. First I connected it to my Sony TV via HDMI output. For a few days it worked very well. Then one day when switching on the computer, it boots and the TV screen turns black and the TV displays the error message "no input signal". I connected the Revo to a Samsung LED TV, and it did the same. What do you guys think the problem is? How do I tackle this issue? Any help is deeply appreciated.

    Read the article

  • LaTeX presentation - which package

    - by Maciej Piechotka
    I need to create a technical presenatation (just a few slides but with formulas etc.). It seems that LaTeX is a natural choice. However - which package should I use and why (the second part is important as probably for the first one there is no right answer)? As far I found Beamer Prosper I know that I can use either but: There may be better one which I'll use in future There may be a kill-features I have no idea about Thank you in advance for answers and lack of flames ;)

    Read the article

  • How can I restrict a user's time spent on internet?

    - by phan
    I see related questions on how to restrict access to certain websites but that is not really what I want. Here's my situation: My baby sitter wants access to the internet but we we don't want her spending hours on the computer and neglecting our infant children. Thus, I want to be able to restrict her surfing to 30 minutes a session, with sessions being at least 3 hours apart. I do not care to restrict the content. Does anyone know what is the best way to implement this? Thanks.

    Read the article

  • What is the best position for power unit?

    - by guest86
    I would like to buy new computer case. Last time I bought a computer was in 2008 and many things have changed up to day. Many new computer cases have power unit placed down, on bottom. I'm thinking about buying some of those cases, but i'm not sure about something - if power unit is placed on the bottom it can't take away hot air from the case and pump it out right? All my PC parts are silent - CPU (E8200, placed below 12cm Nochtua fan of power unit) has heat-pipe cooler with Nochtua fan spinning at only 800rpms, GPU has cooler powered by 7V instead 12 and that's why i don't want to HAVE TO place another fan to pump out hot air instead of PU placed on top. That might make some noise. So i ask someone more experienced: if i buy some computer case with PU placed down, do i HAVE TO place some fan to pump out hot air?

    Read the article

  • Installing Zend on CentOS is having dependency issues

    - by rax
    I'm trying to install PHP's Zend Server on my CentOS VPS but it's having dependency issues that I can't seem to resolve. zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-gui-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-dev-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) knowledgetree-ce-3.7.0-2.noarch from KTnoarch has depsolving problems --> Missing Dependency: php-5.2-xmlrpc-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) knowledgetree-ce-3.7.0-2.noarch from KTnoarch has depsolving problems --> Missing Dependency: php-5.2-fileinfo-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-zend-extensions is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-common-extensions-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-fileinfo-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) Error: Missing Dependency: php-5.2-xmlrpc-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) Error: Missing Dependency: php-5.2-gui-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-common-extensions-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-dev-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-zend-extensions is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) When consulting the Google, all I get told is how to install PHP 5.2.* on CentOS. According to the output of php -v, I've done that. PHP 5.2.8 (cli) (built: Sep 28 2009 15:37:15) Copyright (c) 1997-2008 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies with the ionCube PHP Loader v3.1.34, Copyright (c) 2002-2009, by ionCube Ltd. How can I solve this issue?

    Read the article

  • Several "SideBySide" errors in the event viewer (Windows XP SP3)

    - by Wesley
    Hi all, For some reason, my netbook continuously comes up with SideBySide errors in the event viewer under Computer Management. Is there some way to get rid of these errors? My netbook occasionally BSODs and looking back into the event viewer after, at least 8 SideBySide errors were logged prior to BSOD. Please help! Thanks in advance. Netbook is a Samsung N120 with upgraded RAM to 2 GB. EDIT: So, SideBySide errors have been resolved and apparently the BSOD isn't related. But I remember specifically, that last time I had a BSOD, it was due to an "unknown hard error." What causes that?

    Read the article

  • Why doesn’t windows explorer show my removable / USB drive even though the command prompt does ?

    - by Gishu
    I'm running WinXP SP2. Around 50% of the time, when I slot in my USB drive. Windows explorer refuses to show the drive. If I click on the Safely remove hardware icon on the tray, I can see a menu item for the drive - say drive G: (the light on the USB drive is also on) If I type in G: into the address bar of explorer, it says 'Cannot find...' If I type in G: into a command prompt window, it works and I can do a dir to see the list of directories on the drive. To fix this, I've to remove-reinsert the pen-drive. But doing it every day is annoying. Also this happens only on this machine.. I use this drive on my home machine and it works flawlessly each time. Can anyone suggest things that I could try ? Thanks for reading...

    Read the article

  • Adobe CS5.1; I want the measure tool as the default; when I use Ctrl-I, the measure (ruler) tool appears... is this sort of thing possible?

    - by Earl J
    I scan many slides, transparencies, and negatives. I need to straighten them often. I would like the ruler/measurement tool under CTRL-I to remain as the default with eveery start of Photoshop. Is it possible to make it the default instead of the eyedropper tool? Perhaps a shortcut key of its own might work as well... where one keystroke will bring it to the top... will it stay there? hmmm. . . I've just given myself an idea... (LOL)

    Read the article

  • S5000XVN Intel Motherboard - Only sees 12 out of 16GB of RAM

    - by Richie086
    So I have an older Intel S5000XVN motherboard, here are the specs CPU Arch : 2 CPU - 2 Cores - 2 Threads CPU PSN : Intel Xeon CPU 5160 @ 3.00GHz CPU EXT : MMX, SSE (1, 2, 3, 3S), EM64T, VT-x CPUID : 6.F.6 / Extended : 6.F CPU Cache : L1 : 2 x 32 / 2 x 32 KB - L2 : 4096 KB Core : Woodcrest (65 nm) / Stepping : B2 Freq : 2985.21 MHz (331.69 * 9) MB Brand : Intel MB Model : S5000XVN NB : Intel 5000X rev 31 SB : Intel 6321ESB rev 09 RAM : 16384 MB FB-DDR2 RAM Speed : 331.7 MHz (1:1) @ N/A Slot 1 : 2048MB (5300) Slot 1 Manufacturer : Kingston Slot 2 : 2048MB (5300) Slot 2 Manufacturer : Qimonda Slot 3 : 2048MB (5300) Slot 3 Manufacturer : Kingston Slot 4 : 2048MB (5300) Slot 4 Manufacturer : Qimonda Slot 5 : 2048MB (5300) Slot 5 Manufacturer : Kingston Slot 6 : 2048MB (5300) Slot 6 Manufacturer : Qimonda As you can clearly see, CPU-Z says I have 16GB of PC2-5300 RAM installed. For some reason in both BIOS and in Windows the maximum usable RAM is 12GB instead of 16GB. I have a dedicated video card connnected, so it can't be stealing RAM to use for the GPU (the S5000XVN does not have any onboard video). I am running Windows Server 2008 R2 x64 as the primary OS - so there should not be a memory limitation imposed on me from the OS. Has anyone experienced this before? Any ideas on how I can actually use all 16GB of RAM? I plan on using this machine to use for a Hyper-V server and have x2 Quad Core Xeon CPUs on the way as I write this post.

    Read the article

  • Excel: conditionally format a cell using the format of another, content-matching cell

    - by Eric A. Meyer
    I have an Excel spreadsheet where I’d like to be able to create a “key” of formatted cells with unique values, and then in another sheet format cells using the key formatting. So for example, my key is as follows, with one value per cell and the visual formatting indicated in parentheses: A (red background) B (green background) C (blue background) So that’s on one sheet (or in a remote corner of the current sheet—whichever is better). Then, in an area that I mark for conditional formatting, I can type one of those three letters and have the cell where I typed it visually formatted according to the key. So if I type a “B” into one of the conditionally formatted cells, it gets a green background. (Note that I’m using backgrounds here solely for ease of explanation: ideally I want to have all visual formatting copied over, whether it’s foreground color, background color, font weight, borders, or whatever. But I’ll take what I can get, obviously.) And—just to make it extra-tricky—if I change the formatting in the key, that change should be reflected in cells that reference the key. Thus, if I change the “B” formatting in the key from a green background to a purple background, any “B” in the main sheet should switch to the new color. Similarly, it should be possible to add or remove values from the key and have those changes applied to the main data set. I’m okay with the formatting-update-on-key-change being triggered by clicking a button or something. I suspect that if any of this is possible it will require VBA, but I’ve never used it so I’ve no idea where to start if that’s the case. I’m hoping it’s possible without VBA. I know it’s possible to just use multiple conditional formats, but my use case here is that I’m trying to create the above-described capability for someone who isn’t conversant with conditional formatting. I’d like to let them be able to define a key, update it if necessary, and keep on truckin’ without me having to rewrite the spreadsheet’s formatting rules for them. --- UPDATE --- So I think I was a bit unclear about my original request. Let me try again with an image. The image shows the “key” on the left, where values and styles are defined using keyboard and mouse input. On the right, you see the data that should be formatted to match the key. Thus if I type a “C” into a cell in the Data area, it should be blue-backed. Furthermore, if I change the formatting of “C” in the Key to have a purple background, all the “C” cells should switch from blue to purple. For further craziness, if I add more to the Key (say, “D” with a yellow background) then any “D” cells will be styled to match; if I remove a Key entry, then matching values in the Data area should revert to default styling. So. Is that more clear? Is it possible, in whole or in part? I don’t have to use conditional formatting for this; in fact, at this point I suspect I probably shouldn’t. But I’m open to any approach!

    Read the article

  • Why does 1080p through a VGA cable fit my HDTV but is oversized when through an HDMI cable?

    - by GraemeF
    I have put together a new PC with a XFX GeForce GTX 260 graphics card and have it connected to my HDTV. First, I used an old VGA cable with a DVI to VGA adapter and plugged it in to my HDTV's VGA port. Running at 1920x1080 it fit the screen perfectly. Now, to avoid running another cable across the room, I have connected it with a DVI to HDMI cable to my TV's HDMI port, and the desktop at 1920x1080 is cropped by the edge of the screen. I have "fixed" the cropping by using NVIDIA's "Adjust desktop size and position" tool, which created a screen resolution of 1814x1022 to fit the screen, but this is no longer the TV's native resolution and confuses some software (e.g. WoW). Why does VGA work as expected, but HDMI is scaled up? Can it be avoided?

    Read the article

  • How do i tell if my drivers are up to date on Acer?

    - by joe
    Hoping some kind souls can help me out ? I got a blue screen the other day after trying to load sandboxie. So its obviously conflicting with something. I checked if my drivers were up to date on my acer aspire one AOD270 on this intel based site; http://www.drivermanager.com/en/down...tel&Logo=intel Its showing i have 2 drivers that need updating ; Intel NM10 Express chipset and the Realtek PCIE Cardreader. I have no idea whether to do the update via the Intel Driver update site or the Acer drivers download page? I then ran Bluescreenview and on the dump file its showing ; ''caused by driver'' igdkmd32.sys ''file description'' Intel (R) WDDM Kernel mode driver ''product name''Intel Graphics Accelerator Drivers for Windows 7(R) I bought the laptop here in SE Asia about a year ago. The ''HOT!! NEW download tool'' on the acer drivers site (below) doesnt seem to work and the info about removing and installing drivers is limited. Not sure what to trust on non acer/manufacturer sites. http://support.acer.com/us/en/produc...1&modelId=4040 I've located the igdkmd32.sys file inside the INTEL GRAPHICS MEDIA ACCELERATOR 3600 SERIES 8.14.8.1064. When i click on ''update driver'' in control panel it searches and says its up to date. In windows maintenance it says this intel had a problem, but no solution. For all i know my drivers could be up to date and its something else. Can anybody advise a dummy step by step the process i should follow ? I've never done this before. eg do i delete the old driver first and then download the new one.how much of a problem i could cause by downloading this type of thing wrongly? As yet i havent downloaded any drivers. I've asked on other forums but no luck as yet. Thanks for any help!

    Read the article

  • Do I need to be worried about these SMART drive temperatures?

    - by Steve Lorimer
    I have 5 hard drives in a machine sitting in a cupboard. /dev/sda is a 500GB Seagate drive, and is the boot disk. /dev/sd{b,c,d,e} are 2TB drives in a raid6 configuration. smartctl is showing significantly higher temperatures (like ~140 degrees celsius) on the raid drives than the boot drive. Do I need to be worried? /dev/sdb and /dev/sde are new Western Digital Black drives (new=1 week) /dev/sdc and /dev/sdd are 5 year old Hitachi drives /dev/sda [SAT], Temperature_Celsius changed from 40 to 39 /dev/sdc [SAT], Temperature_Celsius changed from 142 to 146 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 142 /dev/sdd [SAT], Temperature_Celsius changed from 142 to 146 /dev/sda [SAT], Airflow_Temperature_Cel changed from 61 to 62 /dev/sda [SAT], Temperature_Celsius changed from 39 to 38 /dev/sde [SAT], Temperature_Celsius changed from 107 to 108 /dev/sdb [SAT], Temperature_Celsius changed from 108 to 109 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 150 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 150 /dev/sda [SAT], Airflow_Temperature_Cel changed from 62 to 61 /dev/sda [SAT], Temperature_Celsius changed from 38 to 39 Update: Adding detailed drive information as per request: /dev/sda =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Pipeline HD 5900.2 Device Model: ST3500312CS Serial Number: 5VV47HXA LU WWN Device Id: 5 000c50 02aad5ad6 Firmware Version: SC13 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdb =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2003FZEX-00Z4SA0 Serial Number: WD-WMC1F1398726 LU WWN Device Id: 5 0014ee 003b8bd25 Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdc =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K3000 Device Model: Hitachi HDS723020BLA642 Serial Number: MN1220F30WSTUD LU WWN Device Id: 5 000cca 369cc9f5d Firmware Version: MN6OA580 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdd =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K3000 Device Model: Hitachi HDS723020BLA642 Serial Number: MN1220F30WST4D LU WWN Device Id: 5 000cca 369cc9f48 Firmware Version: MN6OA580 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sde =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2003FZEX-00Z4SA0 Serial Number: WD-WMC1F1483782 LU WWN Device Id: 5 0014ee 3002d235c Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled

    Read the article

  • How to compare old CPU to new CPU?

    - by Lasse V. Karlsen
    I hope this question doesn't get closed at once :) I have an old laptop, a Compaq NC4200, which is going its final laps around the track these days. Battery is dead, and everything kinda runs slow. It also has only 1GB of memory, and even though I don't know if it can take more, I probably wouldn't be able to get hold of any that matches without having to special order it. The size, however, has been ideal for my usage pattern, so I'm looking to replace it with a similarly sized laptop, at least in the same size category. However, it's been a while since I tried keeping track of CPUs, so I have a question. The old laptop has a Intel Pentium M 760 1.86GHz processor. One laptop I found online has a Intel Pentium SU4100 1.3GHz dual-core. This type of processor seems to be quite common in the price and size-range I've been looking. What kind of relative performance boost could I expect from the old one to the new one? I am not expecting a "about 7.45x speed", but some indication would be nice. For instance, dual-core tells me it might be akin to 2.6GHz, but I assume I can't simply compare 1.86GHz to 2.6GHz and expect the new one to run about 1.4x as fast, I expect more these days. Or is that unrealistic for this kind of processor? Do I need to up my price range and go for a 2+ GHz processor?

    Read the article

  • Why do I get this message from chrome when navigating to https://www.amazon.com?

    - by Denis
    This is probably not the site you are looking for! You attempted to reach www.amazon.com, but instead you actually reached a server identifying itself as *.voxcdn.com. This may be caused by a misconfiguration on the server or by something more serious. An attacker on your network could be trying to get you to visit a fake (and potentially harmful) version of www.amazon.com. Intermittently, I get a blank page when going to http://www.amazon.com. So I stuck an 's' in the URL, making it https://www.amazon.com and got that message above (with the nice red screen) from Chrome indicating there might be some monkey business going on. After hammering on the URL a bunch of times and pulling it up in Chrome's developer tool to look at the network traffic on it, the url (without the s) started behaving. The url with the s just hangs, but the red screen no longer comes up. Some specs... I've got a macBook Pro, Snow Leopard, Time Warner cable. I've had enough strange stuff happening over the past couple months (google.com, youtube.com, amazon.com not coming up or loading strange error messages with random reference numbers) that I finally decided to switch to OpenDNS. Still having problems, though.

    Read the article

  • Why doesn't my environment variable get set?

    - by reprogrammer
    I have to set an environment variable called GDK_NATIVE_WINDOWS to fix the problem with Eclipse buttons in Ubuntu. To set the environment variable, I added the following line to ~/.pam_environment. GDK_NATIVE_WINDOWS DEFAULT=true Surprisingly, the environment variable doesn't get set when I echo $GDK_NATIVE_WINDOWS in a terminal. However, all other environment variables that I've listed in ~/.pam_environment are set properly. Besides, when I switch to a tty, e.g. Alt+Ctrl+F1, the environment variable gets set correctly. Can anyone tell what's wrong with setting this environment variable in ~/.pam_environment?

    Read the article

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >