batch insert - Page 261

moving raid 10 to another identical server both on Smart Array 6i controllers

- by SalimQrdl

I have dead HP DL 380G4 with RAID 1+0 with 1 logical volume from 4x72GB drives on built-in Smart Array 6i 128Mb BBWC. It was shut down properly. It seems it was usual death for Proliant with ILO led 2,3,8 lighting. I want to move array to another identical server with same raid firmware level. What is the best strategy?: I have RAID 1+0 on bay 0 bay 1 bay 2 bay 3 As I understand bay0+bay1 are in RAID 1 , bay2+bay3 are in RAID 1, and both RAID 1 pairs are in RAID 0. So should I : Clear RAID config on new server, insert bay 0, bay 2 and power-on or Create RAID 1+0 with 1 logical volume from clear HDDs , and then poweroff ,remove HDDs and insert 2 HDDs(bay 0, bay 2) from old RAID 1+0. then power-on. (each hdd has its raid position info stored but may be could work on same config) According to documentation for Smart Array 6i it could be possible to migrate. however one requirement point is unclear for me Before you move drives, the following conditions must be met: • The array is in its original configuration. " What is orginal and non-original config for RAID 1+0? Another point "If you want to move an array to another controller, you must also consider the following additional limitations: • All drives in the array must be moved at the same time." I want to move one hdd from each RAID 1 pair. to have mirrors untouched just in case. Do they mean to move all 4 simultaniously? Smart Array 6i User Guide: Moving Drives and Arrays You can move drives to other ID positionson the same array controller. You can also move a complete arrayfrom one controller to another, even if the controllers are on different servers. Before you move drives, the following conditions must be met: • If moving thedrives to a different server, the new server must have enough empty bays to accommodate all the drives simultaneously. • The move will not result in more than 14 physical drives per controller channel. • No controller will be configured with more than 32 logical volumes. • The array has no failed or missing drives. • The array is in its original configuration. • The controller is not reading from or writing to any of the spare drives in the array. • The controller is not running capacity expansion, capacity extension, or RAID or stripe size migration. • The controller is using the latestfirmware version (recommended). If you want to move an array to another controller, you must also consider the following additional limitations: • All drives in the array must be moved at the same time. • In most cases, a moved array (and the logical drives that it contains) can still undergo arraycapacity expansion, logical drive capacity extension, or migration of RAID level orstripe size. When all the conditions have been met: Back up all data before removing any drives or changing configuration. This step is requiredif you are moving data-containing drives from a controller that does not have a battery-backed cache. Power down the system. If you are moving an array from a controller that contains a RAID ADG logical volume to a controller that does not support RAID ADG: Move the drives. Power up the system. If a 1724 POST message is displayed, drive positions were changed successfully and the configuration was updated. If a 1785 (NotConfigured)POST message is displayed: a. Power down the system immediately to prevent data loss. b. Return the drives to their original locations. c. Restore the data from backup, if necessary. Check the new drive configuration byrunning ORCA or ACU ("Configuring an Array" on page 9).

Read the article

Mongodb Slave replication lag

- by Leonid Bugaev

We using standard mongo setup: 2 replicas + 1 arbiter. Both replica servers use same AWS m1.medium with RAID10 EBS. We experiencing constantly growing replication lag on secondary replica. I tried to do full-resync, you can see it on graph, but it helped only for some hours. Our mongo usage is really low now, and frankly i can't understan why it can be. iostat 1 for secondary: avg-cpu: %user %nice %system %iowait %steal %idle 80.39 0.00 2.94 0.00 16.67 0.00 Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn xvdap1 0.00 0.00 0.00 0 0 xvdb 0.00 0.00 0.00 0 0 xvdfp4 12.75 0.00 189.22 0 193 xvdfp3 12.75 0.00 189.22 0 193 xvdfp2 7.84 0.00 40.20 0 41 xvdfp1 7.84 0.00 40.20 0 41 md127 19.61 0.00 219.61 0 224 mongostat for secondary (why 100% locks? i guess its the problem): insert query update delete getmore command flushes mapped vsize res faults locked % idx miss % qr|qw ar|aw netIn netOut conn set repl time *10 *0 *16 *0 0 2|4 0 30.9g 62.4g 1.65g 0 107 0 0|0 0|0 198b 1k 16 replset-01 SEC 06:55:37 *4 *0 *8 *0 0 12|0 0 30.9g 62.4g 1.65g 0 91.7 0 0|0 0|0 837b 5k 16 replset-01 SEC 06:55:38 *4 *0 *7 *0 0 3|0 0 30.9g 62.4g 1.64g 0 110 0 0|0 0|0 342b 1k 16 replset-01 SEC 06:55:39 *4 *0 *8 *0 0 1|0 0 30.9g 62.4g 1.64g 0 82.9 0 0|0 0|0 62b 1k 16 replset-01 SEC 06:55:40 *3 *0 *7 *0 0 5|0 0 30.9g 62.4g 1.6g 0 75.2 0 0|0 0|0 466b 2k 16 replset-01 SEC 06:55:41 *4 *0 *7 *0 0 1|0 0 30.9g 62.4g 1.64g 0 138 0 0|0 0|1 62b 1k 16 replset-01 SEC 06:55:42 *7 *0 *15 *0 0 3|0 0 30.9g 62.4g 1.64g 0 95.4 0 0|0 0|0 342b 1k 16 replset-01 SEC 06:55:43 *7 *0 *14 *0 0 1|0 0 30.9g 62.4g 1.64g 0 98 0 0|0 0|0 62b 1k 16 replset-01 SEC 06:55:44 *8 *0 *17 *0 0 3|0 0 30.9g 62.4g 1.64g 0 96.3 0 0|0 0|0 342b 1k 16 replset-01 SEC 06:55:45 *7 *0 *14 *0 0 3|0 0 30.9g 62.4g 1.64g 0 96.1 0 0|0 0|0 186b 2k 16 replset-01 SEC 06:55:46 mongostat for primary insert query update delete getmore command flushes mapped vsize res faults locked % idx miss % qr|qw ar|aw netIn netOut conn set repl time 12 30 20 0 0 3 0 30.9g 62.6g 641m 0 0.9 0 0|0 0|0 212k 619k 48 replset-01 M 06:56:41 5 17 10 0 0 2 0 30.9g 62.6g 641m 0 0.5 0 0|0 0|0 159k 429k 48 replset-01 M 06:56:42 9 22 16 0 0 3 0 30.9g 62.6g 642m 0 0.7 0 0|0 0|0 158k 276k 48 replset-01 M 06:56:43 6 18 12 0 0 2 0 30.9g 62.6g 640m 0 0.7 0 0|0 0|0 93k 231k 48 replset-01 M 06:56:44 6 12 8 0 0 3 0 30.9g 62.6g 640m 0 0.3 0 0|0 0|0 80k 125k 48 replset-01 M 06:56:45 8 21 14 0 0 9 0 30.9g 62.6g 641m 0 0.6 0 0|0 0|0 118k 419k 48 replset-01 M 06:56:46 10 34 20 0 0 6 0 30.9g 62.6g 640m 0 1.3 0 0|0 0|0 164k 527k 48 replset-01 M 06:56:47 6 21 13 0 0 2 0 30.9g 62.6g 641m 0 0.7 0 0|0 0|0 111k 477k 48 replset-01 M 06:56:48 8 21 15 0 0 2 0 30.9g 62.6g 641m 0 0.7 0 0|0 0|0 204k 336k 48 replset-01 M 06:56:49 4 12 8 0 0 8 0 30.9g 62.6g 641m 0 0.5 0 0|0 0|0 156k 530k 48 replset-01 M 06:56:50 Mongo version: 2.0.6

Read the article

How do I reset/update my BIOS for Optiplex GX280?

- by Sam Langlhey

So far this has been a nightmare for me, which has been frustrating me constantly. I am using Dell Optiplex GX280 with Windows XP home edition, which is running a BIOS version A04. Recently, i've rebooted the pc to find out that its not booting. It will get to the Windows boot up screen with the progress bar but only to restart to the same process again, over and over. Frustrated that I am, i've inserted the Windows recovery CD to at least either repair of reinstall the operating system to find out that was not possible. I hit F8 to have the boot options, each of the boot option that I've selected gave me an error saying: "Selected boot device is not available." Right after that, I went to the BIOS setting and did a diagnostic test, which recognized all the Boot devices onboard. Now, I cannot even repair of reinstall Windows XP, because the system is not booting from none of the boot devices. The surprise is when I removed the hard-drive from the computer and loaded it on into another computer successfully; that's right, there is nothing wrong with the hard drive. After that I was totally puzzled. I found a few pointers online saying that the BIOS start-up block might be corrupted itself and I might need to flash/update the BIOS. I found the detailed instruction on how to create a Boot up disk by downloading the BIOS firmware from the manufacture's website. I did exactly as instructed below: Download the latest version or your choose version of BIOS file for your computer or motherboard from the manufacturer’s support site. Rename the downloaded file to AMIBOOT.ROM. Copy the file to a floppy disk. Insert the floppy disk to the floppy drive. Turn on the system. After I did that and powered on the PC to boot from the floppy drive, it gave me this error message: "Non-System Disk or Disk Error. Replace and Strike any key when ready." I did all that, and I kept on pressing [Ctrl]+[Home] to force it, but it did not did any satisfying result. Desperate as I am, my next attempt is to try the instruction below. Since I want to be ready, in the event it does not work, do you have any solution that you can provide? Please keep in mind that I cannot boot from any of the devices at this moment. My only hope now is to come on with a solution that will work through the Floppy drive, since that's the only drive that affected. Thank you very much for your advice and support in advance. To create a Windows startup disk, insert a floppy disk into the drive of a similarly configured, working Windows XP system, launch My Computer, right-click the floppy disk icon, and select the Format command from the context menu. When you see the Format dialog box, leave all the default settings as they are and click the Start button. Once the format operation is complete, close the Format dialog box to return to My Computer, double-click the drive C icon to access the root directory, and copy the following three files to the floppy disk: Boot.ini NTLDR Ntdetect.com

Read the article

Two pass blur shader using libgdx tile map renderer

- by Alexandre GUIDET

I am trying to apply the following technique: blur effect using two pass shader to my libgdx game using the OrthogonalTiledMapRenderer. The idea is to blur the background wich is also a tilemap but rendered with another camera with a different zoom applied. Here is a screen capture without effect: Using the OrthogonalTiledMapRenderer sprite batch like this: backgroundMapRenderer.getSpriteBatch().setShader(shaderBlurX); backgroundMapRenderer.render(layerBackground); I get the following render: Wich is ok for X blur pass. I then try using frame buffer object like in this example. But the effect seems to be too much zoomed: I may be messing up with the camera and the zoom factor. Here is the code: private ShaderProgram shaderBlurX; private ShaderProgram shaderBlurY; private int FBO_SIZE = 800; private FrameBuffer targetA; private FrameBuffer targetB; targetA = new FrameBuffer(Pixmap.Format.RGBA8888, FBO_SIZE, FBO_SIZE, false); targetB = new FrameBuffer(Pixmap.Format.RGBA8888, FBO_SIZE, FBO_SIZE, false); targetA.begin(); Gdx.gl.glClearColor(1, 1, 1, 0); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); backgroundMapRenderer.render(layerBackground); targetA.end(); targetB.begin(); Gdx.gl.glClearColor(1, 1, 1, 0); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); backgroundMapRenderer.getSpriteBatch().setShader(shaderBlurX); backgroundMapRenderer.render(layerBackground); targetB.end(); TextureRegion back = new TextureRegion(targetB.getColorBufferTexture()); back.flip(false, true); backgroundMapRenderer.getSpriteBatch() .setProjectionMatrix(backgroundCamera.combined); backgroundMapRenderer.getSpriteBatch().setShader(shaderBlurY); backgroundMapRenderer.getSpriteBatch().begin(); backgroundMapRenderer.getSpriteBatch().draw(back, 0, 0); backgroundMapRenderer.getSpriteBatch().end(); I know I am making something the wrong way, but I can't find any resources about applying two passes shader using tile map renderer. Does someone know how to achieve this?

Read the article

The Complete List of iPad Tips, Tricks, and Tutorials

- by Ross

The Apple iPad is the latest new toy, and we’ve put together a comprehensive list of every tip, trick, and tutorial that we could find to help you get the most out of it—and we’re even giving one away to one lucky reader. So read on! Note: We’ll be keeping this page updated as we find more great articles, so you should bookmark this page for future reference. Want Your Own iPad? How-To Geek is Giving One Away! All you have to do to enter is become a fan of our Facebook page, and we’ll pick a random fan to win the prize. Win an iPad on the How-To Geek Facebook Fan Page Disable the “clicking sound” on the iPad Keyboard Does the clicking sound when you tap the iPad keyboard bother you? Thankfully it’s easy to disable with a couple of taps. How to disable the “clicking sound” on your iPad’s keyboard Enable and add bookmarks to the Safari Bookmarks Bar on your iPad By default, Safari doesn’t display the Bookmarks Bar. This tip shows you how to change that. How to enable and add bookmarks to the Safari Bookmarks Bar on your iPad Clear the Cache, History and Cookies in Safari for the iPad You’re probably used to clearing this kind of data right from within the browser. Not so with Safari on the iPad – but here’s how you can. How to clear the cache, history and cookies in Safari for iPad How to add more Apps to your iPad Dock The iPad has four icons in its ‘dock’. Did you know it can hold 6? How to add more Apps to your iPad Dock Convert PDF files to ePub files to read on your iPad with iBooks ePub is the format that iBooks are in. So for those of you with large eBook collections in PDF, here’s how you convert them to read in iBooks. How to convert PDF files to ePub files to read on your iPad with iBooks How to force your iPad to restart Has an app caused your iPad to freeze up, and you can’t escape? This tip shows you how to force your iPad to restart. How to force your iPad to restart How to export Keynote for iPad presentations to your Mac or PC Exporting Keynote presentations from your iPad to your Mac or PC isn’t as straight forward as you might have expected. This tutorial shows you how. How to export Keynote for iPad presentations to your Mac or PC How to import presentations to Keynote on your iPad Having trouble getting your presentations onto your iPad? How to import presentations to Keynote on your iPad How to import documents to Pages on your iPad This guide shows you how to transfer documents (MS Word or Pages) from your Mac/PC to your iPad. How to import documents to Pages on your iPad How to insert photos in a Pages document using iPad and share it as a PDF Want to spice up that doc with a picture you just took? This tutorial will show you how – and how to export that document as a PDF. How to insert photos in a Pages document using iPad and share it as a PDF How to lock your iPad If you have kids or co-workers/friends who think it’s funny to mess with your iPad – lock it. How to lock your iPad How to remove the “Sent from my iPad” signature from outgoing email on your iPad Does everyone need to know you just sent that email from your iPad? Probably not. This guide shows you how to remove the “Sent from my iPad” signature and replace it with your own (or none). How to remove the “Sent from my iPad” signature from outgoing email on your iPad How To Sync Multiple Calendars to the iPad With Google Sync This tutorial will show you a workaround on how to sync multiple calendars on your iPad using Google Sync. How to Sync Multiple Calendars to the iPad With Google Sync How to determine the MAC address of your iPad If your network restricts connections via MAC address – this guide will show you how to determine what yours is. How to determine the MAC address of your iPad How to take a screenshot of your iPad Do you need to take a screenshot of your iPad? This quick tip shows you how to do just that. How to take a screenshot of your iPad How to delete apps from your iPod Touch, iPhone or iPad Anyone who had an iPod Touch or iPhone before they had an iPad won’t need this tutorial. But if you’re new to the experience, this one will help. How to delete apps from your iPod Touch, iPhone or iPad How to determine the iPad ECID on Windows and Mac iPadintosh shows us how to determine the iPad’s ECID code – something you’ll want to have come Jailbreak time. How to grab the iPad ECID in Windows or OS X iPad Apps: Twitter and social networking essentials Enggadget has you covered with reviews of the first slew of iPad specific Twitter and other social networking apps. iPad Apps: Twitter and social networking essentials What does your website look like on an iPad? iPad Peek is a web based tool that allows you to enter any given URL, and it will display that page the same way Safari on the iPad does. Great for web site owners who don’t have access to an iPad. iPadPeek Stream Music and Videos to your iPad Gizmodo reviews the iPad app StreamToMe, which allows you to stream media from your Mac to your iPad across your local network. Their feelings in a nutshell – worth the $3, but not perfect. Review: StreamToMe for the iPad Apple iPad : Change links in Google Reader to point to full HTML webpage How to change links in Safari for iPad so that Google Reader points to a full HTML webpage How to connect an iPad to your existing wireless keyboard This video will show you how to connect your iPad to a wireless keyboard if you’re having any problems – and from the sound of things, quite a few folks are. via TUAW How to get started with the iPad Mashable has a very entry-level guide that will help you set up your iPad for the first time. Mashable’s Guide to Setting up the iPad Essential iPad Apps Downloadsquad gives mini-reviews to 8 iPad apps that you should install as soon as you get your iPad. iPad App Buyers Guide: Essential Apps you should get on day one Videos: The Official iPad Guided Tours From none other than Apple! Great getting started videos for all the included iPad apps. The Official iPad Guided Tours The Official iPad Manual When you buy an iPad, you don’t get a manual. But that’s not to say there isn’t one. Apple provides a 150 guide for your iPad in PDF format. The Official iPad Manual (pdf) How to print from your iPad Sure, it’s actually just an App (PrintCentral – $9.99 USD), but as of right now, it’s the only way. PrintCentral How to make your own iPad Wallpaper A perfectly detailed tutorial on how to make your own wallpaper for your iPad. The author also provides a really nice sample wallpaper, published under the Attribution-Noncommercial 2.0 Generic license. How to make your own iPad Wallpaper Got any more tips? Share them in the comments, and we’ll update the post with the links, or just the tip itself. Similar Articles Productive Geek Tips Want an iPad? How-To Geek is Giving One Away!Why Wait? Amazing New Add-on Turns Your iPhone into an iPad! [Comic]Clear the Auto-Complete Email Address Cache in OutlookAsk the Readers: Share Your Tips for Defeating Viruses and MalwareStupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos

Read the article

Tools and Utilities for the .NET Developer

- by mbcrump

Tweet this list! Add a link to my site to your bookmarks to quickly find this page again! Add me to twitter! This is a list of the tools/utilities that I use to do my job/hobby. I wanted this page to load fast and contain information that only you care about. If I have missed a tool that you like, feel free to contact me and I will add it to the list. Also, this list took a lot of time to complete. Please do not steal my work, if you like the page then please link back to my site. I will keep the links/information updated as new tools/utilities are created. Windows/.NET Development – This is a list of tools that any Windows/.NET developer should have in his bag. I have used at some point in my career everything listed on this page and below is the tools worth keeping. Name Description License AnkhSVN Subversion support for Visual Studio. It also works with VS2010. Free Aurora XAML Designer One of the best XAML creation tools available. Has a ton of built in templates that you can copy/paste into VS2010. COST/Trial BeyondCompare Beyond Compare 3 is the ideal tool for comparing files and folders on your Windows or Linux system. Visualize changes in your code and carefully reconcile them. COST/Trial BuildIT Automated Task Tool Its main purpose is to automate tasks, whether it is the final packaging of a product, an automated daily build, maybe sending out a mailing list, even backing-up files. Free C Sharper for VB Convert VB to C#. COST CLRProfiler Analyze and improve the behavior of your .NET app. Free CodeRush Direct competitor to ReSharper, contains similar feature. This is one of those decide for yourself. COST/Trial Disk2VHD Disk2vhd is a utility that creates VHD (Virtual Hard Disk - Microsoft's Virtual Machine disk format) versions of physical disks for use in Microsoft Virtual PC or Microsoft Hyper-V virtual machines (VMs). Free Eazfuscator.NET Is a free obfuscator for .NET. The main purpose is to protect intellectual property of software. Free EQATEC Profiler Make your .NET app run faster. No source code changes are needed. Just point the profiler to your app, run the modified code, and get a visual report. COST Expression Studio 3/4 Comes with Web, Blend, Sketch Flow and more. You can create websites, produce beautiful XAML and more. COST/Trial Expresso The award-winning Expresso editor is equally suitable as a teaching tool for the beginning user of regular expressions or as a full-featured development environment for the experienced programmer or web designer with an extensive knowledge of regular expressions. Free Fiddler Fiddler is a web debugging proxy which logs all HTTP(s) traffic between your computer and the internet. Free Firebug Powerful Web development tool. If you build websites, you will need this. Free FxCop FxCop is an application that analyzes managed code assemblies (code that targets the .NET Framework common language runtime) and reports information about the assemblies, such as possible design, localization, performance, and security improvements. Free GAC Browser and Remover Easy way to remove multiple assemblies from the GAC. Assemblies registered by programs like Install Shield can also be removed. Free GAC Util The Global Assembly Cache tool allows you to view and manipulate the contents of the global assembly cache and download cache. Free HelpScribble Help Scribble is a full-featured, easy-to-use help authoring tool for creating help files from start to finish. You can create Win Help (.hlp) files, HTML Help (.chm) files, a printed manual and online documentation (on a web site) all from the same Help Scribble project. COST/Trial IETester IETester is a free Web Browser that allows you to have the rendering and JavaScript engines of IE9 preview, IE8, IE7 IE 6 and IE5.5 on Windows 7, Vista and XP, as well as the installed IE in the same process. Free iTextSharp iText# (iTextSharp) is a port of the iText open source java library for PDF generation written entirely in C# for the .NET platform. Use the iText mailing list to get support. Free Kaxaml Kaxaml is a lightweight XAML editor that gives you a "split view" so you can see both your XAML and your rendered content. Free LINQPad LinqPad lets you interactively query databases in a LINQ. Free Linquer Many programmers are familiar with SQL and will need a help in the transition to LINQ. Sometimes there are complicated queries to be written and Linqer can help by converting SQL scripts to LINQ. COST/Trial LiquidXML Liquid XML Studio 2010 is an advanced XML developers toolkit and IDE, containing all the tools needed for designing and developing XML schema and applications. COST/Trial Log4Net log4net is a tool to help the programmer output log statements to a variety of output targets. log4net is a port of the excellent log4j framework to the .NET runtime. We have kept the framework similar in spirit to the original log4j while taking advantage of new features in the .NET runtime. For more information on log4net see the features document. Free Microsoft Web Platform Installer The Microsoft Web Platform Installer 2.0 (Web PI) is a free tool that makes getting the latest components of the Microsoft Web Platform, including Internet Information Services (IIS), SQL Server Express, .NET Framework and Visual Web Developer easy. Free Mono Development Don't have Visual Studio - no problem! This is an open Source C# and .NET development environment for Linux, Windows, and Mac OS X Free Net Mass Downloader While it’s great that Microsoft has released the .NET Reference Source Code, you can only get it one file at a time while you’re debugging. If you’d like to batch download it for reading or to populate the cache, you’d have to write a program that instantiated and called each method in the Framework Class Library. Fortunately, .NET Mass Downloader comes to the rescue! Free nMap Nmap ("Network Mapper") is a free and open source (license) utility for network exploration or security auditing. Many systems and network administrators also find it useful for tasks such as network inventory, managing service upgrade schedules, and monitoring host or service uptime. Free NoScript (Firefox add-in) The NoScript Firefox extension provides extra protection for Firefox, Flock, Seamonkey and other Mozilla-based browsers: this free, open source add-on allows JavaScript, Java and Flash and other plug-ins to be executed only by trusted web sites of your choice (e.g. your online bank), and provides the most powerful Anti-XSS protection available in a browser. Free NotePad 2 Notepad2, a fast and light-weight Notepad-like text editor with syntax highlighting. This program can be run out of the box without installation, and does not touch your system's registry. Free PageSpy PageSpy is a small add-on for Internet Explorer that allows you to select any element within a webpage, select an option in the context menu, and view detailed information about both the coding behind the page and the element you selected. Free Phrase Express PhraseExpress manages your frequently used text snippets in customizable categories for quick access. Free PowerGui PowerGui is a free community for PowerGUI, a graphical user interface and script editor for Microsoft Windows PowerShell! Free Powershell Comes with Win7, but you can automate tasks by using the .NET Framework. Great for network admins. Free Process Explorer Ever wondered which program has a particular file or directory open? Now you can find out. Process Explorer shows you information about which handles and DLLs processes have opened or loaded. Also, included in the SysInterals Suite. Free Process Monitor Process Monitor is an advanced monitoring tool for Windows that shows real-time file system, Registry and process/thread activity. Free Reflector Explore and analyze compiled .NET assemblies, viewing them in C#, Visual Basic, and IL. This is an Essential for any .NET developer. Free Regular Expression Library Stuck on a Regular Expression but you think someone has already figured it out? Chances are they have. Free Regulator Regulator makes Regular Expressions easy. This is a must have for a .NET Developer. Free RenameMaestro RenameMaestro is probably the easiest batch file renamer you'll find to instantly rename multiple files COST ReSharper The one program that I cannot live without. Supports VS2010 and offers simple refactoring, code analysis/assistance/cleanup/templates. One of the few applications that is worth the $$$. COST/Trial ScrewTurn Wiki ScrewTurn Wiki allows you to create, manage and share wikis. A wiki is a collaboratively-edited, information-centered website: the most famous is Wikipedia. Free SharpDevelop What is #develop? SharpDevelop is a free IDE for C# and VB.NET projects on Microsoft's .NET platform. Free Show Me The Template Show Me The Template is a tool for exploring the templates, be their data, control or items panel, that comes with the controls built into WPF for all 6 themes. Free SnippetCompiler Compiles code snippets without opening Visual Studio. It does not support .NET 4. Free SQL Prompt SQL Prompt is a plug-in that increases how fast you can work with SQL. It provides code-completion for SQL server, reformatting, db schema information and snippets. Awesome! COST/Trial SQLinForm SQLinForm is an automatic SQL code formatter for all major databases including ORACLE, SQL Server, DB2, UDB, Sybase, Informix, PostgreSQL, Teradata, MySQL, MS Access etc. with over 70 formatting options. COST/OnlineFree SSMS Tools SSMS Tools Pack is an add-in for Microsoft SQL Server Management Studio (SSMS) including SSMS Express. Free Storm STORM is a free and open source tool for testing web services. Free Telerik Code Convertor Convert code from VB to C Sharp and Vice Versa. Free TurtoiseSVN TortoiseSVN is a really easy to use Revision control / version control / source control software for Windows.Since it's not an integration for a specific IDE you can use it with whatever development tools you like. Free UltraEdit UltraEdit is the ideal text, HTML and hex editor, and an advanced PHP, Perl, Java and JavaScript editor for programmers. UltraEdit is also an XML editor including a tree-style XML parser. An industry-award winner, UltraEdit supports disk-based 64-bit file handling (standard) on 32-bit Windows platforms (Windows 2000 and later). COST/Trial Virtual Windows XP Comes with some W7 version and allows you to run WinXP along side W7. Free VirtualBox Virtualization by Sun Microsystems. You can virtualize Windows, Linux and more. Free Visual Log Parser SQL queries against a variety of log files and other system data sources. Free WinMerge WinMerge is an Open Source differencing and merging tool for Windows. WinMerge can compare both folders and files, presenting differences in a visual text format that is easy to understand and handle. Free Wireshark Wireshark is one of the best network protocol analyzer's for Unix and windows. This has been used several times to get me out of a bind. Free XML Notepad 07 Old, but still one of my favorite XML viewers. Free Productivity Tools – This is the list of tools that I use to save time or quickly navigate around Windows. Name Description License AutoHotKey Automate almost anything by sending keystrokes and mouse clicks. You can write a mouse or keyboard macro by hand or use the macro recorder. Free CLCL CLCL is clipboard caching utility. Free Ditto Ditto is an extension to the standard windows clipboard. It saves each item placed on the clipboard allowing you access to any of those items at a later time. Ditto allows you to save any type of information that can be put on the clipboard, text, images, html, custom formats, ..... Free Evernote Remember everything from notes to photos. It will synch between computers/devices. Free InfoRapid Inforapid is a search tool that will display all you search results in a html like browser. If you click on a word in that browser, it will start another search to the word you clicked on. Handy if you want to trackback something to it's true origin. The word you looked for will be highlighted in red. Clicking on the red word will open the containing file in a text based viewer. Clicking on any word in the opened document will start another search on that word. Free KatMouse The prime purpose of the KatMouse utility is to enhance the functionality of mice with a scroll wheel, offering 'universal' scrolling: moving the mouse wheel will scroll the window directly beneath the mouse cursor (not the one with the keyboard focus, which is default on Windows OSes). This is a major increase in the usefulness of the mouse wheel. Free ScreenR Instant Screencast with nothing to download. Works with Mac or PC and free. Free Start++ Start++ is an enhancement for the Start Menu in Windows Vista. It also extends the Run box and the command-line with customizable commands. For example, typing "w Windows Vista" will take you to the Windows Vista page on Wikipedia! Free Synergy Synergy lets you easily share a single mouse and keyboard between multiple computers with different operating systems, each with its own display, without special hardware. It's intended for users with multiple computers on their desk since each system uses its own monitor(s). Free Texter Texter lets you define text substitution hot strings that, when triggered, will replace hotstring with a larger piece of text. By entering your most commonly-typed snippets of text into Texter, you can save countless keystrokes in the course of the day. Free Total Commander File handling, FTP, Archive handling and much more. Even works with Win3.11. COST/Trial Available Wizmouse WizMouse is a mouse enhancement utility that makes your mouse wheel work on the window currently under the mouse pointer, instead of the currently focused window. This means you no longer have to click on a window before being able to scroll it with the mouse wheel. This is a far more comfortable and practical way to make use of the mouse wheel. Free Xmarks Bookmark sync and search between computers. Free General Utilities – This is a list for power user users or anyone that wants more out of Windows. I usually install a majority of these whenever I get a new system. Name Description License µTorrent µTorrent is a lightweight and efficient BitTorrent client for Windows or Mac with many features. I use this for downloading LEGAL media. Free Audacity Audacity® is free, open source software for recording and editing sounds. It is available for Mac OS X, Microsoft Windows, GNU/Linux, and other operating systems. Learn more about Audacity... Also check our Wiki and Forum for more information. Free AVast Free FREE Antivirus. Free CD Burner XP Pro CDBurnerXP is a free application to burn CDs and DVDs, including Blu-Ray and HD-DVDs. It also includes the feature to burn and create ISOs, as well as a multilanguage interface. Free CDEX You can extract digital audio CDs into mp3/wav. Free Combofix Combofix is a freeware (a legitimate spyware remover created by sUBs), Combofix was designed to scan a computer for known malware, spyware (SurfSideKick, QooLogic, and Look2Me as well as any other combination of the mentioned spyware applications) and remove them. Free Cpu-Z Provides information about some of the main devices of your system. Free Cropper Cropper is a screen capture utility written in C#. It makes it fast and easy to grab parts of your screen. Use it to easily crop out sections of vector graphic files such as Fireworks without having to flatten the files or open in a new editor. Use it to easily capture parts of a web site, including text and images. It's also great for writing documentation that needs images of your application or web site. Free DropBox Drag and Drop files to sync between computers. Free DVD-Fab Converts/Copies DVDs/Blu-Ray to different formats. (like mp4, mkv, avi) COST/Trial Available FastStone Capture FastStone Capture is a powerful, lightweight, yet full-featured screen capture tool that allows you to easily capture and annotate anything on the screen including windows, objects, menus, full screen, rectangular/freehand regions and even scrolling windows/web pages. Free ffdshow FFDShow is a DirectShow decoding filter for decompressing DivX, XviD, H.264, FLV1, WMV, MPEG-1 and MPEG-2, MPEG-4 movies. Free Filezilla FileZilla Client is a fast and reliable cross-platform FTP, FTPS and SFTP client with lots of useful features and an intuitive graphical user interface. You can also download a server version. Free FireFox Web Browser, do you really need an explanation? Free FireGestures A customizable mouse gestures extension which enables you to execute various commands and user scripts with five types of gestures. Free FoxIt Reader Light weight PDF viewer. You should install this with the advanced setting or it will install a toolbar and setup some shortcuts. Free gSynchIt Synch Gmail and Outlook. Even supports Outlook 2010 32/64 bit COST/Trial Available Hulu Desktop At home or in a hotel, this has replaced my cable/satellite subscription. Free ImgBurn ImgBurn is a lightweight CD / DVD / HD DVD / Blu-ray burning application that everyone should have in their toolkit! Free Infrarecorder InfraRecorder is a free CD/DVD burning solution for Microsoft Windows. It offers a wide range of powerful features; all through an easy to use application interface and Windows Explorer integration. Free KeePass KeePass is a free open source password manager, which helps you to manage your passwords in a secure way. Free LastPass Another password management, synchronize between browsers, automatic form filling and more. Free Live Essentials One download and lots of programs including Mail, Live Writer, Movie Maker and more! Free Monitores MonitorES is a small windows utility that helps you to turnoff monitor display when you lock down your machine.Also when you lock your machine, it will pause all your running media programs & set your IM status message to "Away" / Custom message(via options) and restore it back to normal when you back. Free mRemote mRemote is a full-featured, multi-tab remote connections manager. Free Open Office OpenOffice.org 3 is the leading open-source office software suite for word processing, spreadsheets, presentations, graphics, databases and more. It is available in many languages and works on all common computers. It stores all your data in an international open standard format and can also read and write files from other common office software packages. It can be downloaded and used completely free of charge for any purpose. Free Paint.NET Simple, intuitive, and innovative user interface for editing photos. Free Picasa Picasa is free photo editing software from Google that makes your pictures look great. Free Pidgin Pidgin is an easy to use and free chat client used by millions. Connect to AIM, MSN, Yahoo, and more chat networks all at once. Free PING PING is a live Linux ISO, based on the excellent Linux From Scratch (LFS) documentation. It can be burnt on a CD and booted, or integrated into a PXE / RIS environment. Free Putty PuTTY is an SSH and telnet client, developed originally by Simon Tatham for the Windows platform. Free Revo Uninstaller Revo Uninstaller Pro helps you to uninstall software and remove unwanted programs installed on your computer easily! Even if you have problems uninstalling and cannot uninstall them from "Windows Add or Remove Programs" control panel applet.Revo Uninstaller is a much faster and more powerful alternative to "Windows Add or Remove Programs" applet! It has very powerful features to uninstall and remove programs. Free Security Essentials Microsoft Security Essentials is a new, free consumer anti-malware solution for your computer. Free SetupVirtualCloneDrive Virtual CloneDrive works and behaves just like a physical CD/DVD drive, however it exists only virtually. Point to the .ISO file and it appears in Windows Explorer as a Drive. Free Shark 007 Codec Pack Play just about any file format with this download. Also includes my W7 Media Playlist Generator. Free Snagit 9 Screen Capture on steroids. Add arrows, captions, etc to any screenshot. COST/Trial Available SysinternalsSuite Go ahead and download the entire sys internals suite. I have mentioned multiple programs in this suite already. Free TeraCopy TeraCopy is a compact program designed to copy and move files at the maximum possible speed, providing the user with a lot of features. Free for Home TrueCrypt Free open-source disk encryption software for Windows 7/Vista/XP, Mac OS X, and Linux Free TweetDeck Fully featured Twitter client. Free UltraVNC UltraVNC is a powerful, easy to use and free software that can display the screen of another computer (via internet or network) on your own screen. The program allows you to use your mouse and keyboard to control the other PC remotely. It means that you can work on a remote computer, as if you were sitting in front of it, right from your current location. Free Unlocker Unlocks locked files. Pretty simple right? Free VLC Media Player VLC media player is a highly portable multimedia player and multimedia framework capable of reading most audio and video formats Free Windows 7 Media Playlist This program is special to my heart because I wrote it. It has been mentioned on podcast and various websites. It allows you to quickly create wvx video playlist for Windows Media Center. Free WinRAR WinRAR is a powerful archive manager. It can backup your data and reduce the size of email attachments, decompress RAR, ZIP and other files downloaded from Internet and create new archives in RAR and ZIP file format. COST/Trial Available Blogging – I use the following for my blog. Name Description License Insert Code for Windows Live Writer Insert Code for Windows Live Writer will format a snippet of text in a number of programming languages such as C#, HTML, MSH, JavaScript, Visual Basic and TSQL. Free LiveWriter Included in Live Essentials, but the ultimate in Windows Blogging Free PasteAsVSCode Plug-in for Windows Live Writer that pastes clipboard content as Visual Studio code. Preserves syntax highlighting, indentation and background color. Converts RTF, outputted by Visual Studio, into HTML. Free Desktop Management – The list below represent the best in Windows Desktop Management. Name Description License 7 Stacks Allows users to have "stacks" of icons in their taskbar. Free Executor Executor is a multi purpose launcher and a more advanced and customizable version of windows run. Free Fences Fences is a program that helps you organize your desktop and can hide your icons when they are not in use. Free RocketDock Rocket Dock is a smoothly animated, alpha blended application launcher. It provides a nice clean interface to drop shortcuts on for easy access and organization. With each item completely customizable there is no end to what you can add and launch from the dock. Free WindowsTab Tabbing is an essential feature of modern web browsers. Window Tabs brings the productivity of tabbed window management to all of your desktop applications. Free

Read the article

SQL SERVER – Out of the Box – Activty and Performance Reports from SSSMS

- by pinaldave

SQL Server management Studio 2008 is wonderful tool and has many different features. Many times, an average user does not use them as they are not aware about these features. Today, we will learn one such feature. SSMS comes with many inbuilt performance and activity reports, but we do not use it to the full potential. Let us see how we can access these standard reports. Connect to SQL Server Node >> Right Click on it >> Go to Reports >> Click on Standard Reports >> Pick Any Report. Click to Enlarge You can see there are many reports, which an average users needs right away, are available there. Let me list all the reports available. Server Dashboard Configuration Changes History Schema Changes History Scheduler Health Memory Consumption Activity – All Blocking Transactions Activity – All Cursors Activity – All Sessions Activity – Top Sessions Activity – Dormant Sessions Activity - Top Connections Top Transactions by Age Top Transactions by Blocked Transactions Count Top Transactions by Locks Count Performance – Batch Execution Statistics Performance – Object Execution Statistics Performance – Top Queries by Average CPU Time Performance – Top Queries by Average IO Performance – Top Queries by Total CPU Time Performance – Top Queries by Total IO Service Broker Statistics Transactions Log Shipping Status In fact, when you look at the above list, it is fairly clear that they are very thought out and commonly needed reports that are available in SQL Server 2008. Let us run a couple of reports and observe their result. Performance – Top Queries by Total CPU Time Click to Enlarge Memory Consumption Click to Enlarge There are options for custom reports as well, which we can configure. We will learn about them in some other post. Additionally, you can right click on the reports and export in Excel or PDF. I think this tool can really help those who are just looking for some quick details. Does any of you use this feature, or this feature has some limitations and You would like to see more features? Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

Read the article

DropDownList and SelectListItem Array Item Updates in MVC

- by Rick Strahl

So I ran into an interesting behavior today as I deployed my first MVC 4 app tonight. I have a list form that has a filter drop down that allows selection of categories. This list is static and rarely changes so rather than loading these items from the database each time I load the items once and then cache the actual SelectListItem[] array in a static property. However, when we put the site online tonight we immediately noticed that the drop down list was coming up with pre-set values that randomly changed. Didn't take me long to trace this back to the cached list of SelectListItem[]. Clearly the list was getting updated - apparently through the model binding process in the selection postback. To clarify the scenario here's the drop down list definition in the Razor View:@Html.DropDownListFor(mod => mod.QueryParameters.Category, Model.CategoryList, "All Categories") where Model.CategoryList gets set with:[HttpPost] [CompressContent] public ActionResult List(MessageListViewModel model) { InitializeViewModel(model); busEntry entryBus = new busEntry(); var entries = entryBus.GetEntryList(model.QueryParameters); model.Entries = entries; model.DisplayMode = ApplicationDisplayModes.Standard; model.CategoryList = AppUtils.GetCachedCategoryList(); return View(model); } The AppUtils.GetCachedCategoryList() method gets the cached list or loads the list on the first access. The code to load up the list is housed in a Web utility class. The method looks like this:/// <summary> /// Returns a static category list that is cached /// </summary> /// <returns></returns> public static SelectListItem[] GetCachedCategoryList() { if (_CategoryList != null) return _CategoryList; lock (_SyncLock) { if (_CategoryList != null) return _CategoryList; var catBus = new busCategory(); var categories = catBus.GetCategories().ToList(); // Turn list into a SelectItem list var catList= categories .Select(cat => new SelectListItem() { Text = cat.Name, Value = cat.Id.ToString() }) .ToList(); catList.Insert(0, new SelectListItem() { Value = ((int)SpecialCategories.AllCategoriesButRealEstate).ToString(), Text = "All Categories except Real Estate" }); catList.Insert(1, new SelectListItem() { Value = "-1", Text = "--------------------------------" }); _CategoryList = catList.ToArray(); } return _CategoryList; } private static SelectListItem[] _CategoryList ; This seemed normal enough to me - I've been doing stuff like this forever caching smallish lists in memory to avoid an extra trip to the database. This list is used in various places throughout the application - for the list display and also when adding new items and setting up for notifications etc.. Watch that ModelBinder! However, it turns out that this code is clearly causing a problem. It appears that the model binder on the [HttpPost] method is actually updating the list that's bound to and changing the actual entry item in the list and setting its selected value. If you look at the code above I'm not setting the SelectListItem.Selected value anywhere - the only place this value can get set is through ModelBinding. Sure enough when stepping through the code I see that when an item is selected the actual model - model.CategoryList[x].Selected - reflects that. This is bad on several levels: First it's obviously affecting the application behavior - nobody wants to see their drop down list values jump all over the place randomly. But it's also a problem because the array is getting updated by multiple ASP.NET threads which likely would lead to odd crashes from time to time. Not good! In retrospect the modelbinding behavior makes perfect sense. The actual items and the Selected property is the ModelBinder's way of keeping track of one or more selected values. So while I assumed the list to be read-only, the ModelBinder is actually updating it on a post back producing the rather surprising results. Totally missed this during testing and is another one of those little - "Did you know?" moments. So, is there a way around this? Yes but it's maybe not quite obvious. I can't change the behavior of the ModelBinder, but I can certainly change the way that the list is generated. Rather than returning the cached list, I can return a brand new cloned list from the cached items like this:/// <summary> /// Returns a static category list that is cached /// </summary> /// <returns></returns> public static SelectListItem[] GetCachedCategoryList() { if (_CategoryList != null) { // Have to create new instances via projection // to avoid ModelBinding updates to affect this // globally return _CategoryList .Select(cat => new SelectListItem() { Value = cat.Value, Text = cat.Text }) .ToArray(); } …} The key is that newly created instances of SelectListItems are returned not just filtered instances of the original list. The key here is 'new instances' so that the ModelBinding updates do not update the actual static instance. The code above uses LINQ and a projection into new SelectListItem instances to create this array of fresh instances. And this code works correctly - no more cross-talk between users. Unfortunately this code is also less efficient - it has to reselect the items and uses extra memory for the new array. Knowing what I know now I probably would have not cached the list and just take the hit to read from the database. If there is even a possibility of thread clashes I'm very wary of creating code like this. But since the method already exists and handles this load in one place this fix was easy enough to put in. Live and learn. It's little things like this that can cause some interesting head scratchers sometimes…© Rick Strahl, West Wind Technologies, 2005-2012Posted in MVC ASP.NET .NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Reporting Services - It's a Wrap!

- by smisner

If you have any experience at all with Reporting Services, you have probably developed a report using the matrix data region. It's handy when you want to generate columns dynamically based on data. If users view a matrix report online, they can scroll horizontally to view all columns and all is well. But if they want to print the report, the experience is completely different and you'll have to decide how you want to handle dynamic columns. By default, when a user prints a matrix report for which the number of columns exceeds the width of the page, Reporting Services determines how many columns can fit on the page and renders one or more separate pages for the additional columns. In this post, I'll explain two techniques for managing dynamic columns. First, I'll show how to use the RepeatRowHeaders property to make it easier to read a report when columns span multiple pages, and then I'll show you how to "wrap" columns so that you can avoid the horizontal page break. Included with this post are the sample RDLs for download. First, let's look at the default behavior of a matrix. A matrix that has too many columns for one printed page (or output to page-based renderer like PDF or Word) will be rendered such that the first page with the row group headers and the inital set of columns, as shown in Figure 1. The second page continues by rendering the next set of columns that can fit on the page, as shown in Figure 2.This pattern continues until all columns are rendered. The problem with the default behavior is that you've lost the context of employee and sales order - the row headers - on the second page. That makes it hard for users to read this report because the layout requires them to flip back and forth between the current page and the first page of the report. You can fix this behavior by finding the RepeatRowHeaders of the tablix report item and changing its value to True. The second (and subsequent pages) of the matrix now look like the image shown in Figure 3. The problem with this approach is that the number of printed pages to flip through is unpredictable when you have a large number of potential columns. What if you want to include all columns on the same page? You can take advantage of the repeating behavior of a tablix and get repeating columns by embedding one tablix inside of another. For this example, I'm using SQL Server 2008 R2 Reporting Services. You can get similar results with SQL Server 2008. (In fact, you could probably do something similar in SQL Server 2005, but I haven't tested it. The steps would be slightly different because you would be working with the old-style matrix as compared to the new-style tablix discussed in this post.) I created a dataset that queries AdventureWorksDW2008 tables: SELECT TOP (100) e.LastName + ', ' + e.FirstName AS EmployeeName, d.FullDateAlternateKey, f.SalesOrderNumber, p.EnglishProductName, sum(SalesAmount) as SalesAmount FROM FactResellerSales AS f INNER JOIN DimProduct AS p ON p.ProductKey = f.ProductKey INNER JOIN DimDate AS d ON d.DateKey = f.OrderDateKey INNER JOIN DimEmployee AS e ON e.EmployeeKey = f.EmployeeKey GROUP BY p.EnglishProductName, d.FullDateAlternateKey, e.LastName + ', ' + e.FirstName, f.SalesOrderNumber ORDER BY EmployeeName, f.SalesOrderNumber, p.EnglishProductName To start the report: Add a matrix to the report body and drag Employee Name to the row header, which also creates a group. Next drag SalesOrderNumber below Employee Name in the Row Groups panel, which creates a second group and a second column in the row header section of the matrix, as shown in Figure 4. Now for some trickiness. Add another column to the row headers. This new column will be associated with the existing EmployeeName group rather than causing BIDS to create a new group. To do this, right-click on the EmployeeName textbox in the bottom row, point to Insert Column, and then click Inside Group-Right. Then add the SalesOrderNumber field to this new column. By doing this, you're creating a report that repeats a set of columns for each EmployeeName/SalesOrderNumber combination that appears in the data. Next, modify the first row group's expression to group on both EmployeeName and SalesOrderNumber. In the Row Groups section, right-click EmployeeName, click Group Properties, click the Add button, and select [SalesOrderNumber]. Now you need to configure the columns to repeat. Rather than use the Columns group of the matrix like you might expect, you're going to use the textbox that belongs to the second group of the tablix as a location for embedding other report items. First, clear out the text that's currently in the third column - SalesOrderNumber - because it's already added as a separate textbox in this report design. Then drag and drop a matrix into that textbox, as shown in Figure 5. Again, you need to do some tricks here to get the appearance and behavior right. We don't really want repeating rows in the embedded matrix, so follow these steps: Click on the Rows label which then displays RowGroup in the Row Groups pane below the report body. Right-click on RowGroup,click Delete Group, and select the option to delete associated rows and columns. As a result, you get a modified matrix which has only a ColumnGroup in it, with a row above a double-dashed line for the column group and a row below the line for the aggregated data. Let's continue: Drag EnglishProductName to the data textbox (below the line). Add a second data row by right-clicking EnglishProductName, pointing to Insert Row, and clicking Below. Add the SalesAmount field to the new data textbox. Now eliminate the column group row without eliminating the group. To do this, right-click the row above the double-dashed line, click Delete Rows, and then select Delete Rows Only in the message box. Now you're ready for the fit and finish phase: Resize the column containing the embedded matrix so that it fits completely. Also, the final column in the matrix is for the column group. You can't delete this column, but you can make it as small as possible. Just click on the matrix to display the row and column handles, and then drag the right edge of the rightmost column to the left to make the column virtually disappear. Next, configure the groups so that the columns of the embedded matrix will wrap. In the Column Groups pane, right-click ColumnGroup1 and click on the expression button (labeled fx) to the right of Group On [EnglishProductName]. Replace the expression with the following: =RowNumber("SalesOrderNumber" ). We use SalesOrderNumber here because that is the name of the group that "contains" the embedded matrix. The next step is to configure the number of columns to display before wrapping. Click any cell in the matrix that is not inside the embedded matrix, and then double-click the second group in the Row Groups pane - SalesOrderNumber. Change the group expression to the following expression: =Ceiling(RowNumber("EmployeeName")/3) The last step is to apply formatting. In my example, I set the SalesAmount textbox's Format property to C2 and also right-aligned the text in both the EnglishProductName and the SalesAmount textboxes. And voila - Figure 6 shows a matrix report with wrapping columns. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

SSIS Lookup component tuning tips

- by jamiet

Yesterday evening I attended a London meeting of the UK SQL Server User Group at Microsoft’s offices in London Victoria. As usual it was both a fun and informative evening and in particular there seemed to be a few questions arising about tuning the SSIS Lookup component; I rattled off some comments and figured it would be prudent to drop some of them into a dedicated blog post, hence the one you are reading right now. Scene setting A popular pattern in SSIS is to use a Lookup component to determine whether a record in the pipeline already exists in the intended destination table or not and I cover this pattern in my 2006 blog post Checking if a row exists and if it does, has it changed? (note to self: must rewrite that blog post for SSIS2008). Fundamentally the SSIS lookup component (when using FullCache option) sucks some data out of a database and holds it in memory so that it can be compared to data in the pipeline. One of the big benefits of using SSIS dataflows is that they process data one buffer at a time; that means that not all of the data from your source exists in the dataflow at the same time and is why a SSIS dataflow can process data volumes that far exceed the available memory. However, that only applies to data in the pipeline; for reasons that are hopefully obvious ALL of the data in the lookup set must exist in the memory cache for the duration of the dataflow’s execution which means that any memory used by the lookup cache will not be available to be used as a pipeline buffer. Moreover, there’s an obvious correlation between the amount of data in the lookup cache and the time it takes to charge that cache; the more data you have then the longer it will take to charge and the longer you have to wait until the dataflow actually starts to do anything. For these reasons your goal is simple: ensure that the lookup cache contains as little data as possible. General tips Here is a simple tick list you can follow in order to tune your lookups: Use a SQL statement to charge your cache, don’t just pick a table from the dropdown list made available to you. (Read why in SELECT *... or select from a dropdown in an OLE DB Source component?) Only pick the columns that you need, ignore everything else Make the database columns that your cache is populated from as narrow as possible. If a column is defined as VARCHAR(20) then SSIS will allocate 20 bytes for every value in that column – that is a big waste if the actual values are significantly less than 20 characters in length. Do you need DT_WSTR typed columns or will DT_STR suffice? DT_WSTR uses twice the amount of space to hold values that can be stored using a DT_STR so if you can use DT_STR, consider doing so. Same principle goes for the numerical datatypes DT_I2/DT_I4/DT_I8. Only populate the cache with data that you KNOW you will need. In other words, think about your WHERE clause! Thinking outside the box It is tempting to build a large monolithic dataflow that does many things, one of which is a Lookup. Often though you can make better use of your available resources by, well, mixing things up a little and here are a few ideas to get your creative juices flowing: There is no rule that says everything has to happen in a single dataflow. If you have some particularly resource intensive lookups then consider putting that lookup into a dataflow all of its own and using raw files to pass the pipeline data in and out of that dataflow. Know your data. If you think, for example, that the majority of your incoming rows will match with only a small subset of your lookup data then consider chaining multiple lookup components together; the first would use a FullCache containing that data subset and the remaining data that doesn’t find a match could be passed to a second lookup that perhaps uses a NoCache lookup thus negating the need to pull all of that least-used lookup data into memory. Do you need to process all of your incoming data all at once? If you can process different partitions of your data separately then you can partition your lookup cache as well. For example, if you are using a lookup to convert a location into a [LocationId] then why not process your data one region at a time? This will mean your lookup cache only has to contain data for the location that you are currently processing and with the ability of the Lookup in SSIS2008 and beyond to charge the cache using a dynamically built SQL statement you’ll be able to achieve it using the same dataflow and simply loop over it using a ForEach loop. Taking the previous data partitioning idea further … a dataflow can contain more than one data path so why not split your data using a conditional split component and, again, charge your lookup caches with only the data that they need for that partition. Lookups have two uses: to (1) find a matching row from the lookup set and (2) put attributes from that matching row into the pipeline. Ask yourself, do you need to do these two things at the same time? After all once you have the key column(s) from your lookup set then you can use that key to get the rest of attributes further downstream, perhaps even in another dataflow. Are you using the same lookup data set multiple times? If so, consider the file caching option in SSIS 2008 and beyond. Above all, experiment and be creative with different combinations. You may be surprised at what works. Final thoughts If you want to know more about how the Lookup component differs in SSIS2008 from SSIS2005 then I have a dedicated blog post about that at Lookup component gets a makeover. I am on a mini-crusade at the moment to get a BULK MERGE feature into the database engine, the thinking being that if the database engine can quickly merge massive amounts of data in a similar manner to how it can insert massive amounts using BULK INSERT then that’s a lot of work that wouldn’t have to be done in the SSIS pipeline. If you think that is a good idea then go and vote for BULK MERGE on Connect. If you have any other tips to share then please stick them in the comments. Hope this helps! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

Session memory – who’s this guy named Max and what’s he doing with my memory?

- by extended_events

SQL Server MVP Jonathan Kehayias (blog) emailed me a question last week when he noticed that the total memory used by the buffers for an event session was larger than the value he specified for the MAX_MEMORY option in the CREATE EVENT SESSION DDL. The answer here seems like an excellent subject for me to kick-off my new “401 – Internals” tag that identifies posts where I pull back the curtains a bit and let you peek into what’s going on inside the extended events engine. In a previous post (Option Trading: Getting the most out of the event session options) I explained that we use a set of buffers to store the event data before we write the event data to asynchronous targets. The MAX_MEMORY along with the MEMORY_PARTITION_MODE defines how big each buffer will be. Theoretically, that means that I can predict the size of each buffer using the following formula: max memory / # of buffers = buffer size If it was that simple I wouldn’t be writing this post. I’ll take “boundary” for 64K Alex For a number of reasons that are beyond the scope of this blog, we create event buffers in 64K chunks. The result of this is that the buffer size indicated by the formula above is rounded up to the next 64K boundary and that is the size used to create the buffers. If you think visually, this means that the graph of your max_memory option compared to the actual buffer size that results will look like a set of stairs rather than a smooth line. You can see this behavior by looking at the output of dm_xe_sessions, specifically the fields related to the buffer sizes, over a range of different memory inputs: Note: This test was run on a 2 core machine using per_cpu partitioning which results in 5 buffers. (Seem my previous post referenced above for the math behind buffer count.) input_memory_kb total_regular_buffers regular_buffer_size total_buffer_size 637 5 130867 654335 638 5 130867 654335 639 5 130867 654335 640 5 196403 982015 641 5 196403 982015 642 5 196403 982015 This is just a segment of the results that shows one of the “jumps” between the buffer boundary at 639 KB and 640 KB. You can verify the size boundary by doing the math on the regular_buffer_size field, which is returned in bytes: 196403 – 130867 = 65536 bytes 65536 / 1024 = 64 KB The relationship between the input for max_memory and when the regular_buffer_size is going to jump from one 64K boundary to the next is going to change based on the number of buffers being created. The number of buffers is dependent on the partition mode you choose. If you choose any partition mode other than NONE, the number of buffers will depend on your hardware configuration. (Again, see the earlier post referenced above.) With the default partition mode of none, you always get three buffers, regardless of machine configuration, so I generated a “range table” for max_memory settings between 1 KB and 4096 KB as an example. start_memory_range_kb end_memory_range_kb total_regular_buffers regular_buffer_size total_buffer_size 1 191 NULL NULL NULL 192 383 3 130867 392601 384 575 3 196403 589209 576 767 3 261939 785817 768 959 3 327475 982425 960 1151 3 393011 1179033 1152 1343 3 458547 1375641 1344 1535 3 524083 1572249 1536 1727 3 589619 1768857 1728 1919 3 655155 1965465 1920 2111 3 720691 2162073 2112 2303 3 786227 2358681 2304 2495 3 851763 2555289 2496 2687 3 917299 2751897 2688 2879 3 982835 2948505 2880 3071 3 1048371 3145113 3072 3263 3 1113907 3341721 3264 3455 3 1179443 3538329 3456 3647 3 1244979 3734937 3648 3839 3 1310515 3931545 3840 4031 3 1376051 4128153 4032 4096 3 1441587 4324761 As you can see, there are 21 “steps” within this range and max_memory values below 192 KB fall below the 64K per buffer limit so they generate an error when you attempt to specify them. Max approximates True as memory approaches 64K The upshot of this is that the max_memory option does not imply a contract for the maximum memory that will be used for the session buffers (Those of you who read Take it to the Max (and beyond) know that max_memory is really only referring to the event session buffer memory.) but is more of an estimate of total buffer size to the nearest higher multiple of 64K times the number of buffers you have. The maximum delta between your initial max_memory setting and the true total buffer size occurs right after you break through a 64K boundary, for example if you set max_memory = 576 KB (see the green line in the table), your actual buffer size will be closer to 767 KB in a non-partitioned event session. You get “stepped up” for every 191 KB block of initial max_memory which isn’t likely to cause a problem for most machines. Things get more interesting when you consider a partitioned event session on a computer that has a large number of logical CPUs or NUMA nodes. Since each buffer gets “stepped up” when you break a boundary, the delta can get much larger because it’s multiplied by the number of buffers. For example, a machine with 64 logical CPUs will have 160 buffers using per_cpu partitioning or if you have 8 NUMA nodes configured on that machine you would have 24 buffers when using per_node. If you’ve just broken through a 64K boundary and get “stepped up” to the next buffer size you’ll end up with total buffer size approximately 10240 KB and 1536 KB respectively (64K * # of buffers) larger than max_memory value you might think you’re getting. Using per_cpu partitioning on large machine has the most impact because of the large number of buffers created. If the amount of memory being used by your system within these ranges is important to you then this is something worth paying attention to and considering when you configure your event sessions. The DMV dm_xe_sessions is the tool to use to identify the exact buffer size for your sessions. In addition to the regular buffers (read: event session buffers) you’ll also see the details for large buffers if you have configured MAX_EVENT_SIZE. The “buffer steps” for any given hardware configuration should be static within each partition mode so if you want to have a handy reference available when you configure your event sessions you can use the following code to generate a range table similar to the one above that is applicable for your specific machine and chosen partition mode. DECLARE @buf_size_output table (input_memory_kb bigint, total_regular_buffers bigint, regular_buffer_size bigint, total_buffer_size bigint) DECLARE @buf_size int, @part_mode varchar(8) SET @buf_size = 1 -- Set to the begining of your max_memory range (KB) SET @part_mode = 'per_cpu' -- Set to the partition mode for the table you want to generate WHILE @buf_size <= 4096 -- Set to the end of your max_memory range (KB) BEGIN BEGIN TRY IF EXISTS (SELECT * from sys.server_event_sessions WHERE name = 'buffer_size_test') DROP EVENT SESSION buffer_size_test ON SERVER DECLARE @session nvarchar(max) SET @session = 'create event session buffer_size_test on server add event sql_statement_completed add target ring_buffer with (max_memory = ' + CAST(@buf_size as nvarchar(4)) + ' KB, memory_partition_mode = ' + @part_mode + ')' EXEC sp_executesql @session SET @session = 'alter event session buffer_size_test on server state = start' EXEC sp_executesql @session INSERT @buf_size_output (input_memory_kb, total_regular_buffers, regular_buffer_size, total_buffer_size) SELECT @buf_size, total_regular_buffers, regular_buffer_size, total_buffer_size FROM sys.dm_xe_sessions WHERE name = 'buffer_size_test' END TRY BEGIN CATCH INSERT @buf_size_output (input_memory_kb) SELECT @buf_size END CATCH SET @buf_size = @buf_size + 1 END DROP EVENT SESSION buffer_size_test ON SERVER SELECT MIN(input_memory_kb) start_memory_range_kb, MAX(input_memory_kb) end_memory_range_kb, total_regular_buffers, regular_buffer_size, total_buffer_size from @buf_size_output group by total_regular_buffers, regular_buffer_size, total_buffer_size Thanks to Jonathan for an interesting question and a chance to explore some of the details of Extended Event internals. - Mike

Read the article

Umbraco Permissions Script - Secure Version

- by Vizioz Limited

Back in May I blogged about how to set Permissions for Umbraco using SetACL to set the appropriate directory permissions based on the installation recommendations.Recently I have been working on a site for a client who wanted every security item to be locked down as tightly as possible. And so I modified the script based on the Umbraco security best practices, I thought I'd share it with everyone, if I have missed anything, or if anyone has any suggestions on how to improve this, please let me know :)Please refer to my previous post regarding the SetAcl command line application that you will need.I suggest you save the following into a batch file called: umbPermSecure.batecho offREM Script to setup the Security Permissions for an Umbraco siteREM This script will give your machine Network Service the minimum rights requiredREM for Umbraco to workREM I suggest you update this script to also remove any users who do not need REM access to the web foldersREM **** Pre-requisites ****REM You will need to download - http://setacl.sourceforge.net/REM It is assumed that you have stored SetACL in a directory called, C:\SetACL ifREM not, you will need to modify the script.REM **** Usage ****REM You need to pass in the path for the root of your Umbraco directoryREM E.g. umbPermSecure.bat C:\inetpub\umbracoroot@echo umbPermSecure.bat - Script to set Umbraco File and Directory Permissions@echo based on the Umbraco Security Best Practices Document (13th March 2009)@echo Published by Chris Houston - 19th October 2009@echo http://blog.vizioz.com@echo Adding READ only access SetACL.exe -on "%1" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"SetACL.exe -on "%1\web.config" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"SetACL.exe -on "%1\bin" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"SetACL.exe -on "%1\umbraco" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"@echo Adding READ and EXECUTE access SetACL.exe -on "%1\app_code" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read_ex" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"SetACL.exe -on "%1\usercontrols" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read_ex" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"@echo Adding READ, WRITE and MODIFY access SetACL.exe -on "%1\config" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read" -ace "n:%computername%\NETWORK SERVICE;p:change" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"SetACL.exe -on "%1\css" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read" -ace "n:%computername%\NETWORK SERVICE;p:change" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"SetACL.exe -on "%1\data" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read" -ace "n:%computername%\NETWORK SERVICE;p:change" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"SetACL.exe -on "%1\masterpages" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read" -ace "n:%computername%\NETWORK SERVICE;p:change" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"SetACL.exe -on "%1\media" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read" -ace "n:%computername%\NETWORK SERVICE;p:change" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"SetACL.exe -on "%1\python" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read" -ace "n:%computername%\NETWORK SERVICE;p:change" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"SetACL.exe -on "%1\scripts" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read" -ace "n:%computername%\NETWORK SERVICE;p:change" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"SetACL.exe -on "%1\xslt" -ot file -actn ace -ace "n:%computername%\NETWORK SERVICE;p:read" -ace "n:%computername%\NETWORK SERVICE;p:change" -actn clear -clr "dacl,sacl" -log "c:\setacl\log.txt"

Read the article

BI Publisher at Collaborate 2010

- by mike.donohue

Noelle and I are heading to Collaborate 2010 next week. There are over two dozen sessions on BI Publisher including a Hands On Lab (see below). Very excited to see what our customers and partners will be presenting and how they are using BI Publisher to get better reports and reduce costs. My only regret is that many sessions are scheduled at the same time so I won't get to see all of them. Noelle and I will be presenting the following: Monday, April 19 2:30 pm - 3:30 pm Introduction to Oracle Business Intelligence Publisher Session: 227 Location: Reef F By: Mike 2:30 pm - 3:30 pm The Reporting Platform for Applications: Oracle Business Intelligence Publisher Session: 73170 Location: South Seas Ballroom J By: Noelle 3:45 pm - 4:45 pm Oracle Business Intelligence Publisher Hands On Lab (1) Session: 217 Location: Palm D By: Noelle and Mike Tuesday, April 20 8:00 am - 9:00 am Oracle Business Intelligence Publisher Best Practices Session: 218 Location: Palm D By: Noelle and Mike We will also be at the BI Technology demo pod in the exhibt hall so please stop by and say hello. All BI Publisher related Sessions Sunday, April 18 2:00 pm - 2:50 pm Customizing your Invoices in a Flash! 3:00 pm - 3:50 pm BI Publisher SIG Meeting - Part 1 4:00 pm - 4:50 pm BI Publisher SIG Meeting - Part 2 Monday, April 19 8:00 am - 9:00 am XML Publisher and FSG for Beginners 2:30 pm - 3:30 pm Introduction to Oracle Business Intelligence Publisher 2:30 pm - 3:30 pm The Reporting Platform for Applications: Oracle Business Intelligence Publisher 2:30 pm - 3:30 pm Bay Ballroom A What it Takes to Make Your Business Intelligence Implementation a Success 2:30 pm - 3:30 pm XML Publisher-More Than Just Form Letters 3:45 pm - 4:45 pm JD Edwards EnterpriseOne Reporting and Batch Discussions presented by Technology SIG 3:45 pm - 4:45 pm Hands On Lab: Oracle Business Intelligence Publisher (1) Tuesday, April 20 8:00 am - 9:00 am Oracle Business Intelligence Publisher Best Practices 8:00 am - 9:00 am Creating XML Publisher Documents with PeopleCode 10:30 am - 11:30 am Moving to BI Publisher, Now What? Automated Fax and Email from Oracle EBS 2:00 pm - 3:00 pm Smart Reporting in Oracle Financials Release 12.1 2:00 pm - 3:00 pm Custom Check Printing Framework using XML Publisher 2:00 pm - 3:00 pm BI Publisher and Oracle BI for JD Edwards Wednesday, April 21 8:00 am - 9:00 am XML Publisher Tips for PeopleTools 10:30 am - 11:30 am JD Edwards World - Technical Upgrade Considerations 10:30 am - 11:30 am Data Visualization Best Practices: Know how to design and improve your BI & EPM reports, dashboards, and queries 10:30 am - 11:30 am Oracle BIEE End-to-End 1:00 pm - 2:00 pm Empower JD Edwards Users with Oracle BI Publisher for Ad Hoc Reporting 1:00 pm - 2:00 pm BIP and JD Edwards World - Good Stuff! 2:15 pm - 3:15 pm Proven Strategies for Increasing ROI with PeopleSoft HCM 4:00 pm - 5:00 pm Using Oracle BI Delivers to Send Reports to JD Edwards Users Thursday, April 22 9:45 am - 10:45 am PeopleSoft Recruiting Enhancements You Can Use 9:45 am - 10:45 am Reducing Cost with Oracle's BI Publisher Note (1) the Hands On Lab was not showing in the joint scheduler as of this posting but, it is definitely ON.

Read the article

CodePlex Daily Summary for Monday, June 14, 2010

CodePlex Daily Summary for Monday, June 14, 2010New ProjectsBD File Hash: BD File Hash is a convenient file hash and hash compare tool for Windows which currently works with MD5, SHA-1, and SHA-256 algorithms. FileScan: This is an application that searches through a drive or directory structure for files matching a filter. This project was converted from VB to ...genesis9: genesis9HeinanOS: HeinanOS is an operating system developed mainly in C++. HeinanOS is a light OS (1.44 MB image) with a lot of capabilites and many more are being ...MediaBrowserWS - Creates a Web Service for the popular MediaBrowser plugin: Creates a web service in Media Center for accessing your MediaBrowser collection. Allows for external devices (Tablets/phones/laptops) to access a ...MME: New Edition of Managed Menu Extensions for Visual Studio 2010 The Main goal of "MME" is to provide easy access to adding Right Click menus in the ...MVMMapper: Generate the ViewModel and its mapping to the Model when implementing MVVM in .NET. Developed using T4 templates. Current version supports Silver...ProjectArDotNet: Si te agarro te parto! Si te agarro te emperno no me importa que seas menor de edad!Scriptagility for DotNetNuke: Scriptagility is a DotNetNuke module for Javascript developers. This module provides dynamic client scripting infrastructure for developing javascr...simpleLinux Distro: SimpleLinux. is a Linux distributions that is easy to use. Simple Linux website: http://simplelinux.tkTag Cloud Control for asp.net: Tag Cloud Control for asp.net allows the user to display the most important keywords to display in tag cloud. Each Tag has it own navigation url to...thefreeimdb: fsadie qwUppityUp: UppityUp is a simple and light-weight tray application which monitors a remote server and shows a notification when it comes online. This is usefu...Vivid3D 2 - DirectX 10 3D ToolKit: The sequel to my first ever engine wrote several years ago. It is not based on it in anyway. VSIDev: VSI DevXTQXK_WORK: Actionscript 3.0东坡博客: 这是一个ASP。net mvc 2博客。New Releases.NET Extensions - Extension Methods Library: Release 2010.08: Added extension methods for Bitmap manipulation (scaling for now): - Bitmap.ScaleToSize() - Bitmap.ScaleToSizeProportional() - Bitmap.ScaleProport...Black Falcon Software's Database Data-Access-Layers: “SQLHELPER”, “ORAHELPER” - Handling Binary Data: See attached document...BTech Networking Library: BTech Networking Library: Same as pervious just new namespace, extended networking coming soon!!!Community Forums NNTP bridge: Community Forums NNTP Bridge V37: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Generic Entity Model 2: GEM2 build 54383: This is second BETA release of GEM2! Please see source code change sets for updates! Following implementation is not included in this release: My...Hades: Projet Hadès - Official Demo - Version 0.1.0 Beta: ---------------------------------------------------------------------------- - Projet Hadès - Official Demo - Version 0.1.0 Beta ------------------...HeinanOS: HeinanOS M1 Source Code: You can download HeinanOS M1 Source Code and contribute to HeinanOS development! Be aware that you should not use this code for your own systems! ...HeinanOS: Milestone 1: This is the first major release for HeinanOS 1.0 Please note this is a PRE-RELEASE! This release includes the following features: -Bootable DOS-...HKGolden Express: HKGoldenExpress (Build 201006131900): New features: (None) Bug fix: Incorrect message submit date of message/ replies. (Note: Showing message submit date is enabled since Build 20100...HKGolden Express: HKGoldenExpress (Build 201006140110): New features: (None) Bug fix: (None) Improvements: (None) Other changes: Set time zone of message date as Hong Kong. Adjusted the format of messa...MediaCoder.NET: MediaCoder.NET v1.0 Beta 1.5: Installer file for MediaCoder.NET v1.0 beta 1.5. Now converts multiple files.MME: First release: Features of this release 1. One installer MME.msi. However you can also install MMEMenuManagerSetup.vsix which installs a project template that e...MSBuild Launch Pad (mPad): 1.1 Beta 1: Platform selection box is added.MVMMapper: MVMMapper Release v 1.0.1: This release has no downloadable documentation. Please use the Documentation section to get started.NginxTray: NginxTray 0.7 RC2: NginxTray 0.7 RC2PowerAuras: PowerAuras-3.0.0K-beta3: New Auras: Item Name Equipment Slot Tracking Changes from beta1 5 new aura textures Fixed Tracking bug Added graphical equipment slot sele...PowerAuras: PowerAuras-3.0.0K-beta4: New Auras: Item Name Equipment Slot Tracking Changes from beta1 5 new aura textures Fixed Tracking bug Added graphical equipment slot sele...Scriptagility for DotNetNuke: Scriptagility 1.0 (Beta): Initial public release please evaluate and feedbackSharpDevelop: SharpDevelop 4.0 Beta 1: Release notes: http://community.sharpdevelop.net/forums/t/11388.aspxsimpleLinux Distro: Project X3: This is an example of download for simpleLinuxSOAPI - StackOverflow API Parser/Wrapper Generator: SOAPI Beta 3: The SOAPI Beta 3 download will be made availabe later today when the initial documentation is complete. The previously available Beta 1 download h...Sofa: Initial release V1.0: This is the first release of Sofa. As it is made of code being previously used, as we tested it is a stable release. But bugs are always possible,...Tag Cloud Control for asp.net: Tag Cloud Control for asp.net: Tag Cloud Control for asp.net allows the user to display the most important keywords to display in tag cloud. Each Tag has it own navigation url to...UppityUp: UppityUp v0.1: First functional version, supports monitoring availability by ping (ICMP) requests. Fit for general use. Consists of one standalone .exe file - no...VCC: Latest build, v2.1.30613.0: Automatic drop of latest buildWindStyle ExifInfo for Windows Live Writer: 1.1.0.0: Add: Multiple Language(English and Simplified Chinese); Add: Insert multiple files; Fix: Error when insert pictures without Exif info; Update: Icon...Work Recorder - Hold on own time!: WorkRecorder 1.2: +Add a whole day chartXsltDb - DotNetNuke Module Builder: 01.01.24: Syntax highlighting delivered!New samples for RadControls. On single page you can find RadTreeView, RadRating, RadChart, RadFormDecorator, RadEdito...xUnit.net Contrib: xunitcontrib 0.4 (ReSharper 5.0 RTM + dotCover): xunitcontrib release 0.4 (ReSharper runner) This release provides a test runner plugin for Resharper 5.0, 4.5 and 4.1, targetting all versions of x...Most Popular ProjectsCommunity Forums NNTP bridgeRIA Services EssentialsNeatUploadBxf (Basic XAML Framework)Agile Personal Development Methodology.NET Transactional File ManagerSOLID by exampleASP.NET MVC Time PlannerWEI ShareSiverlight ProjectMost Active ProjectsjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryNB_Store - Free DotNetNuke Ecommerce Catalog ModuleRhyduino - Arduino and Managed CodeCommunity Forums NNTP bridgeCassandraemonBlogEngine.NETLightweight Fluent WorkflowMediaCoder.NETAndrew's XNA Helpers

Read the article

Listing common SQL Code Smells.

- by Phil Factor

Once you’ve done a number of SQL Code-reviews, you’ll know those signs in the code that all might not be well. These ’Code Smells’ are coding styles that don’t directly cause a bug, but are indicators that all is not well with the code. . Kent Beck and Massimo Arnoldi seem to have coined the phrase in the "OnceAndOnlyOnce" page of www.C2.com, where Kent also said that code "wants to be simple". Bad Smells in Code was an essay by Kent Beck and Martin Fowler, published as Chapter 3 of the book ‘Refactoring: Improving the Design of Existing Code’ (ISBN 978-0201485677) Although there are generic code-smells, SQL has its own particular coding habits that will alert the programmer to the need to re-factor what has been written. See Exploring Smelly Code and Code Deodorants for Code Smells by Nick Harrison for a grounding in Code Smells in C# I’ve always been tempted by the idea of automating a preliminary code-review for SQL. It would be so useful to trawl through code and pick up the various problems, much like the classic ‘Lint’ did for C, and how the Code Metrics plug-in for .NET Reflector by Jonathan 'Peli' de Halleux is used for finding Code Smells in .NET code. The problem is that few of the standard procedural code smells are relevant to SQL, and we need an agreed list of code smells. Merrilll Aldrich made a grand start last year in his blog Top 10 T-SQL Code Smells.However, I'd like to make a start by discovering if there is a general opinion amongst Database developers what the most important SQL Smells are. One can be a bit defensive about code smells. I will cheerfully write very long stored procedures, even though they are frowned on. I’ll use dynamic SQL occasionally. You can only use them as an aid for your own judgment and it is fine to ‘sign them off’ as being appropriate in particular circumstances. Also, whole classes of ‘code smells’ may be irrelevant for a particular database. The use of proprietary SQL, for example, is only a ‘code smell’ if there is a chance that the database will have to be ported to another RDBMS. The use of dynamic SQL is a risk only with certain security models. As the saying goes, a CodeSmell is a hint of possible bad practice to a pragmatist, but a sure sign of bad practice to a purist. Plamen Ratchev’s wonderful article Ten Common SQL Programming Mistakes lists some of these ‘code smells’ along with out-and-out mistakes, but there are more. The use of nested transactions, for example, isn’t entirely incorrect, even though the database engine ignores all but the outermost: but it does flag up the possibility that the programmer thinks that nested transactions are supported. If anything requires some sort of general agreement, the definition of code smells is one. I’m therefore going to make this Blog ‘dynamic, in that, if anyone twitters a suggestion with a #SQLCodeSmells tag (or sends me a twitter) I’ll update the list here. If you add a comment to the blog with a suggestion of what should be added or removed, I’ll do my best to oblige. In other words, I’ll try to keep this blog up to date. The name against each 'smell' is the name of the person who Twittered me, commented about or who has written about the 'smell'. it does not imply that they were the first ever to think of the smell! Use of deprecated syntax such as *= (Dave Howard) Denormalisation that requires the shredding of the contents of columns. (Merrill Aldrich) Contrived interfaces Use of deprecated datatypes such as TEXT/NTEXT (Dave Howard) Datatype mis-matches in predicates that rely on implicit conversion.(Plamen Ratchev) Using Correlated subqueries instead of a join (Dave_Levy/ Plamen Ratchev) The use of Hints in queries, especially NOLOCK (Dave Howard /Mike Reigler) Few or No comments. Use of functions in a WHERE clause. (Anil Das) Overuse of scalar UDFs (Dave Howard, Plamen Ratchev) Excessive ‘overloading’ of routines. The use of Exec xp_cmdShell (Merrill Aldrich) Excessive use of brackets. (Dave Levy) Lack of the use of a semicolon to terminate statements Use of non-SARGable functions on indexed columns in predicates (Plamen Ratchev) Duplicated code, or strikingly similar code. Misuse of SELECT * (Plamen Ratchev) Overuse of Cursors (Everyone. Special mention to Dave Levy & Adrian Hills) Overuse of CLR routines when not necessary (Sam Stange) Same column name in different tables with different datatypes. (Ian Stirk) Use of ‘broken’ functions such as ‘ISNUMERIC’ without additional checks. Excessive use of the WHILE loop (Merrill Aldrich) INSERT ... EXEC (Merrill Aldrich) The use of stored procedures where a view is sufficient (Merrill Aldrich) Not using two-part object names (Merrill Aldrich) Using INSERT INTO without specifying the columns and their order (Merrill Aldrich) Full outer joins even when they are not needed. (Plamen Ratchev) Huge stored procedures (hundreds/thousands of lines). Stored procedures that can produce different columns, or order of columns in their results, depending on the inputs. Code that is never used. Complex and nested conditionals WHILE (not done) loops without an error exit. Variable name same as the Datatype Vague identifiers. Storing complex data or list in a character map, bitmap or XML field User procedures with sp_ prefix (Aaron Bertrand)Views that reference views that reference views that reference views (Aaron Bertrand) Inappropriate use of sql_variant (Neil Hambly) Errors with identity scope using SCOPE_IDENTITY @@IDENTITY or IDENT_CURRENT (Neil Hambly, Aaron Bertrand) Schemas that involve multiple dated copies of the same table instead of partitions (Matt Whitfield-Atlantis UK) Scalar UDFs that do data lookups (poor man's join) (Matt Whitfield-Atlantis UK) Code that allows SQL Injection (Mladen Prajdic) Tables without clustered indexes (Matt Whitfield-Atlantis UK) Use of "SELECT DISTINCT" to mask a join problem (Nick Harrison) Multiple stored procedures with nearly identical implementation. (Nick Harrison) Excessive column aliasing may point to a problem or it could be a mapping implementation. (Nick Harrison) Joining "too many" tables in a query. (Nick Harrison) Stored procedure returning more than one record set. (Nick Harrison) A NOT LIKE condition (Nick Harrison) excessive "OR" conditions. (Nick Harrison) User procedures with sp_ prefix (Aaron Bertrand) Views that reference views that reference views that reference views (Aaron Bertrand) sp_OACreate or anything related to it (Bill Fellows) Prefixing names with tbl_, vw_, fn_, and usp_ ('tibbling') (Jeremiah Peschka) Aliases that go a,b,c,d,e... (Dave Levy/Diane McNurlan) Overweight Queries (e.g. 4 inner joins, 8 left joins, 4 derived tables, 10 subqueries, 8 clustered GUIDs, 2 UDFs, 6 case statements = 1 query) (Robert L Davis) Order by 3,2 (Dave Levy) MultiStatement Table functions which are then filtered 'Sel * from Udf() where Udf.Col = Something' (Dave Ballantyne) running a SQL 2008 system in SQL 2000 compatibility mode(John Stafford)

Read the article

ASP.NET Frameworks and Raw Throughput Performance

- by Rick Strahl

A few days ago I had a curious thought: With all these different technologies that the ASP.NET stack has to offer, what's the most efficient technology overall to return data for a server request? When I started this it was mere curiosity rather than a real practical need or result. Different tools are used for different problems and so performance differences are to be expected. But still I was curious to see how the various technologies performed relative to each just for raw throughput of the request getting to the endpoint and back out to the client with as little processing in the actual endpoint logic as possible (aka Hello World!). I want to clarify that this is merely an informal test for my own curiosity and I'm sharing the results and process here because I thought it was interesting. It's been a long while since I've done any sort of perf testing on ASP.NET, mainly because I've not had extremely heavy load requirements and because overall ASP.NET performs very well even for fairly high loads so that often it's not that critical to test load performance. This post is not meant to make a point or even come to a conclusion which tech is better, but just to act as a reference to help understand some of the differences in perf and give a starting point to play around with this yourself. I've included the code for this simple project, so you can play with it and maybe add a few additional tests for different things if you like. Source Code on GitHub I looked at this data for these technologies: ASP.NET Web API ASP.NET MVC WebForms ASP.NET WebPages ASMX AJAX Services (couldn't get AJAX/JSON to run on IIS8 ) WCF Rest Raw ASP.NET HttpHandlers It's quite a mixed bag, of course and the technologies target different types of development. What started out as mere curiosity turned into a bit of a head scratcher as the results were sometimes surprising. What I describe here is more to satisfy my curiosity more than anything and I thought it interesting enough to discuss on the blog :-) First test: Raw Throughput The first thing I did is test raw throughput for the various technologies. This is the least practical test of course since you're unlikely to ever create the equivalent of a 'Hello World' request in a real life application. The idea here is to measure how much time a 'NOP' request takes to return data to the client. So for this request I create the simplest Hello World request that I could come up for each tech. Http Handler The first is the lowest level approach which is an HTTP handler. public class Handler : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/plain"; context.Response.Write("Hello World. Time is: " + DateTime.Now.ToString()); } public bool IsReusable { get { return true; } } } WebForms Next I added a couple of ASPX pages - one using CodeBehind and one using only a markup page. The CodeBehind page simple does this in CodeBehind without any markup in the ASPX page: public partial class HelloWorld_CodeBehind : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { Response.Write("Hello World. Time is: " + DateTime.Now.ToString() ); Response.End(); } } while the Markup page only contains some static output via an expression:<%@ Page Language="C#" AutoEventWireup="false" CodeBehind="HelloWorld_Markup.aspx.cs" Inherits="AspNetFrameworksPerformance.HelloWorld_Markup" %> Hello World. Time is <%= DateTime.Now %> ASP.NET WebPages WebPages is the freestanding Razor implementation of ASP.NET. Here's the simple HelloWorld.cshtml page:Hello World @DateTime.Now WCF REST WCF REST was the token REST implementation for ASP.NET before WebAPI and the inbetween step from ASP.NET AJAX. I'd like to forget that this technology was ever considered for production use, but I'll include it here. Here's an OperationContract class: [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class WcfService { [OperationContract] [WebGet] public Stream HelloWorld() { var data = Encoding.Unicode.GetBytes("Hello World" + DateTime.Now.ToString()); var ms = new MemoryStream(data); // Add your operation implementation here return ms; } } WCF REST can return arbitrary results by returning a Stream object and a content type. The code above turns the string result into a stream and returns that back to the client. ASP.NET AJAX (ASMX Services) I also wanted to test ASP.NET AJAX services because prior to WebAPI this is probably still the most widely used AJAX technology for the ASP.NET stack today. Unfortunately I was completely unable to get this running on my Windows 8 machine. Visual Studio 2012 removed adding of ASP.NET AJAX services, and when I tried to manually add the service and configure the script handler references it simply did not work - I always got a SOAP response for GET and POST operations. No matter what I tried I always ended up getting XML results even when explicitly adding the ScriptHandler. So, I didn't test this (but the code is there - you might be able to test this on a Windows 7 box). ASP.NET MVC Next up is probably the most popular ASP.NET technology at the moment: MVC. Here's the small controller: public class MvcPerformanceController : Controller { public ActionResult Index() { return View(); } public ActionResult HelloWorldCode() { return new ContentResult() { Content = "Hello World. Time is: " + DateTime.Now.ToString() }; } } ASP.NET WebAPI Next up is WebAPI which looks kind of similar to MVC. Except here I have to use a StringContent result to return the response: public class WebApiPerformanceController : ApiController { [HttpGet] public HttpResponseMessage HelloWorldCode() { return new HttpResponseMessage() { Content = new StringContent("Hello World. Time is: " + DateTime.Now.ToString(), Encoding.UTF8, "text/plain") }; } } Testing Take a minute to think about each of the technologies… and take a guess which you think is most efficient in raw throughput. The fastest should be pretty obvious, but the others - maybe not so much. The testing I did is pretty informal since it was mainly to satisfy my curiosity - here's how I did this: I used Apache Bench (ab.exe) from a full Apache HTTP installation to run and log the test results of hitting the server. ab.exe is a small executable that lets you hit a URL repeatedly and provides counter information about the number of requests, requests per second etc. ab.exe and the batch file are located in the \LoadTests folder of the project. An ab.exe command line looks like this: ab.exe -n100000 -c20 http://localhost/aspnetperf/api/HelloWorld which hits the specified URL 100,000 times with a load factor of 20 concurrent requests. This results in output like this: It's a great way to get a quick and dirty performance summary. Run it a few times to make sure there's not a large amount of varience. You might also want to do an IISRESET to clear the Web Server. Just make sure you do a short test run to warm up the server first - otherwise your first run is likely to be skewed downwards. ab.exe also allows you to specify headers and provide POST data and many other things if you want to get a little more fancy. Here all tests are GET requests to keep it simple. I ran each test: 100,000 iterations Load factor of 20 concurrent connections IISReset before starting A short warm up run for API and MVC to make sure startup cost is mitigated Here is the batch file I used for the test: IISRESET REM make sure you add REM C:\Program Files (x86)\Apache Software Foundation\Apache2.2\bin REM to your path so ab.exe can be found REM Warm up ab.exe -n100 -c20 http://localhost/aspnetperf/MvcPerformance/HelloWorldJsonab.exe -n100 -c20 http://localhost/aspnetperf/api/HelloWorldJson ab.exe -n100 -c20 http://localhost/AspNetPerf/WcfService.svc/HelloWorld ab.exe -n100000 -c20 http://localhost/aspnetperf/handler.ashx > handler.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/HelloWorld_CodeBehind.aspx > AspxCodeBehind.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/HelloWorld_Markup.aspx > AspxMarkup.txt ab.exe -n100000 -c20 http://localhost/AspNetPerf/WcfService.svc/HelloWorld > Wcf.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/MvcPerformance/HelloWorldCode > Mvc.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/api/HelloWorld > WebApi.txt I ran each of these tests 3 times and took the average score for Requests/second, with the machine otherwise idle. I did see a bit of variance when running many tests but the values used here are the medians. Part of this has to do with the fact I ran the tests on my local machine - result would probably more consistent running the load test on a separate machine hitting across the network. I ran these tests locally on my laptop which is a Dell XPS with quad core Sandibridge I7-2720QM @ 2.20ghz and a fast SSD drive on Windows 8. CPU load during tests ran to about 70% max across all 4 cores (IOW, it wasn't overloading the machine). Ideally you can try running these tests on a separate machine hitting the local machine. If I remember correctly IIS 7 and 8 on client OSs don't throttle so the performance here should be Results Ok, let's cut straight to the chase. Below are the results from the tests… It's not surprising that the handler was fastest. But it was a bit surprising to me that the next fastest was WebForms and especially Web Forms with markup over a CodeBehind page. WebPages also fared fairly well. MVC and WebAPI are a little slower and the slowest by far is WCF REST (which again I find surprising). As mentioned at the start the raw throughput tests are not overly practical as they don't test scripting performance for the HTML generation engines or serialization performances of the data engines. All it really does is give you an idea of the raw throughput for the technology from time of request to reaching the endpoint and returning minimal text data back to the client which indicates full round trip performance. But it's still interesting to see that Web Forms performs better in throughput than either MVC, WebAPI or WebPages. It'd be interesting to try this with a few pages that actually have some parsing logic on it, but that's beyond the scope of this throughput test. But what's also amazing about this test is the sheer amount of traffic that a laptop computer is handling. Even the slowest tech managed 5700 requests a second, which is one hell of a lot of requests if you extrapolate that out over a 24 hour period. Remember these are not static pages, but dynamic requests that are being served. Another test - JSON Data Service Results The second test I used a JSON result from several of the technologies. I didn't bother running WebForms and WebPages through this test since that doesn't make a ton of sense to return data from the them (OTOH, returning text from the APIs didn't make a ton of sense either :-) In these tests I have a small Person class that gets serialized and then returned to the client. The Person class looks like this: public class Person { public Person() { Id = 10; Name = "Rick"; Entered = DateTime.Now; } public int Id { get; set; } public string Name { get; set; } public DateTime Entered { get; set; } } Here are the updated handler classes that use Person: Handler public class Handler : IHttpHandler { public void ProcessRequest(HttpContext context) { var action = context.Request.QueryString["action"]; if (action == "json") JsonRequest(context); else TextRequest(context); } public void TextRequest(HttpContext context) { context.Response.ContentType = "text/plain"; context.Response.Write("Hello World. Time is: " + DateTime.Now.ToString()); } public void JsonRequest(HttpContext context) { var json = JsonConvert.SerializeObject(new Person(), Formatting.None); context.Response.ContentType = "application/json"; context.Response.Write(json); } public bool IsReusable { get { return true; } } } This code adds a little logic to check for a action query string and route the request to an optional JSON result method. To generate JSON, I'm using the same JSON.NET serializer (JsonConvert.SerializeObject) used in Web API to create the JSON response. WCF REST [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class WcfService { [OperationContract] [WebGet] public Stream HelloWorld() { var data = Encoding.Unicode.GetBytes("Hello World " + DateTime.Now.ToString()); var ms = new MemoryStream(data); // Add your operation implementation here return ms; } [OperationContract] [WebGet(ResponseFormat=WebMessageFormat.Json,BodyStyle=WebMessageBodyStyle.WrappedRequest)] public Person HelloWorldJson() { // Add your operation implementation here return new Person(); } } For WCF REST all I have to do is add a method with the Person result type. ASP.NET MVC public class MvcPerformanceController : Controller { // // GET: /MvcPerformance/ public ActionResult Index() { return View(); } public ActionResult HelloWorldCode() { return new ContentResult() { Content = "Hello World. Time is: " + DateTime.Now.ToString() }; } public JsonResult HelloWorldJson() { return Json(new Person(), JsonRequestBehavior.AllowGet); } } For MVC all I have to do for a JSON response is return a JSON result. ASP.NET internally uses JavaScriptSerializer. ASP.NET WebAPI public class WebApiPerformanceController : ApiController { [HttpGet] public HttpResponseMessage HelloWorldCode() { return new HttpResponseMessage() { Content = new StringContent("Hello World. Time is: " + DateTime.Now.ToString(), Encoding.UTF8, "text/plain") }; } [HttpGet] public Person HelloWorldJson() { return new Person(); } [HttpGet] public HttpResponseMessage HelloWorldJson2() { var response = new HttpResponseMessage(HttpStatusCode.OK); response.Content = new ObjectContent<Person>(new Person(), GlobalConfiguration.Configuration.Formatters.JsonFormatter); return response; } } Testing and Results To run these data requests I used the following ab.exe commands:REM JSON RESPONSES ab.exe -n100000 -c20 http://localhost/aspnetperf/Handler.ashx?action=json > HandlerJson.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/MvcPerformance/HelloWorldJson > MvcJson.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/api/HelloWorldJson > WebApiJson.txt ab.exe -n100000 -c20 http://localhost/AspNetPerf/WcfService.svc/HelloWorldJson > WcfJson.txt The results from this test run are a bit interesting in that the WebAPI test improved performance significantly over returning plain string content. Here are the results: The performance for each technology drops a little bit except for WebAPI which is up quite a bit! From this test it appears that WebAPI is actually significantly better performing returning a JSON response, rather than a plain string response. Snag with Apache Benchmark and 'Length Failures' I ran into a little snag with Apache Benchmark, which was reporting failures for my Web API requests when serializing. As the graph shows performance improved significantly from with JSON results from 5580 to 6530 or so which is a 15% improvement (while all others slowed down by 3-8%). However, I was skeptical at first because the WebAPI test reports showed a bunch of errors on about 10% of the requests. Check out this report: Notice the Failed Request count. What the hey? Is WebAPI failing on roughly 10% of requests when sending JSON? Turns out: No it's not! But it took some sleuthing to figure out why it reports these failures. At first I thought that Web API was failing, and so to make sure I re-ran the test with Fiddler attached and runiisning the ab.exe test by using the -X switch: ab.exe -n100 -c10 -X localhost:8888 http://localhost/aspnetperf/api/HelloWorldJson which showed that indeed all requests where returning proper HTTP 200 results with full content. However ab.exe was reporting the errors. After some closer inspection it turned out that the dates varying in size altered the response length in dynamic output. For example: these two results: {"Id":10,"Name":"Rick","Entered":"2012-09-04T10:57:24.841926-10:00"} {"Id":10,"Name":"Rick","Entered":"2012-09-04T10:57:24.8519262-10:00"} are different in length for the number which results in 68 and 69 bytes respectively. The same URL produces different result lengths which is what ab.exe reports. I didn't notice at first bit the same is happening when running the ASHX handler with JSON.NET result since it uses the same serializer that varies the milliseconds. Moral: You can typically ignore Length failures in Apache Benchmark and when in doubt check the actual output with Fiddler. Note that the other failure values are accurate though. Another interesting Side Note: Perf drops over Time As I was running these tests repeatedly I was finding that performance steadily dropped from a startup peak to a 10-15% lower stable level. IOW, with Web API I'd start out with around 6500 req/sec and in subsequent runs it keeps dropping until it would stabalize somewhere around 5900 req/sec occasionally jumping lower. For these tests this is why I did the IIS RESET and warm up for individual tests. This is a little puzzling. Looking at Process Monitor while the test are running memory very quickly levels out as do handles and threads, on the first test run. Subsequent runs everything stays stable, but the performance starts going downwards. This applies to all the technologies - Handlers, Web Forms, MVC, Web API - curious to see if others test this and see similar results. Doing an IISRESET then resets everything and performance starts off at peak again… Summary As I stated at the outset, these were informal to satiate my curiosity not to prove that any technology is better or even faster than another. While there clearly are differences in performance the differences (other than WCF REST which was by far the slowest and the raw handler which was by far the highest) are relatively minor, so there is no need to feel that any one technology is a runaway standout in raw performance. Choosing a technology is about more than pure performance but also about the adequateness for the job and the easy of implementation. The strengths of each technology will make for any minor performance difference we see in these tests. However, to me it's important to get an occasional reality check and compare where new technologies are heading. Often times old stuff that's been optimized and designed for a time of less horse power can utterly blow the doors off newer tech and simple checks like this let you compare. Luckily we're seeing that much of the new stuff performs well even in V1.0 which is great. To me it was very interesting to see Web API perform relatively badly with plain string content, which originally led me to think that Web API might not be properly optimized just yet. For those that caught my Tweets late last week regarding WebAPI's slow responses was with String content which is in fact considerably slower. Luckily where it counts with serialized JSON and XML WebAPI actually performs better. But I do wonder what would make generic string content slower than serialized code? This stresses another point: Don't take a single test as the final gospel and don't extrapolate out from a single set of tests. Certainly Twitter can make you feel like a fool when you post something immediate that hasn't been fleshed out a little more <blush>. Egg on my face. As a result I ended up screwing around with this for a few hours today to compare different scenarios. Well worth the time… I hope you found this useful, if not for the results, maybe for the process of quickly testing a few requests for performance and charting out a comparison. Now onwards with more serious stuff… Resources Source Code on GitHub Apache HTTP Server Project (ab.exe is part of the binary distribution)© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET Web Api Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

What to Do When Windows Won’t Boot

- by Chris Hoffman

You turn on your computer one day and Windows refuses to boot — what do you do? “Windows won’t boot” is a common symptom with a variety of causes, so you’ll need to perform some troubleshooting. Modern versions of Windows are better at recovering from this sort of thing. Where Windows XP might have stopped in its tracks when faced with this problem, modern versions of Windows will try to automatically run Startup Repair. First Things First Be sure to think about changes you’ve made recently — did you recently install a new hardware driver, connect a new hardware component to your computer, or open your computer’s case and do something? It’s possible the hardware driver is buggy, the new hardware is incompatible, or that you accidentally unplugged something while working inside your computer. The Computer Won’t Power On At All If your computer won’t power on at all, ensure it’s plugged into a power outlet and that the power connector isn’t loose. If it’s a desktop PC, ensure the power switch on the back of its case — on the power supply — is set to the On position. If it still won’t power on at all, it’s possible you disconnected a power cable inside its case. If you haven’t been messing around inside the case, it’s possible the power supply is dead. In this case, you’ll have to get your computer’s hardware fixed or get a new computer. Be sure to check your computer monitor — if your computer seems to power on but your screen stays black, ensure your monitor is powered on and that the cable connecting it to your computer’s case is plugged in securely at both ends. The Computer Powers On And Says No Bootable Device If your computer is powering on but you get a black screen that says something like “no bootable device” or another sort of “disk error” message, your computer can’t seem to boot from the hard drive that Windows was installed on. Enter your computer’s BIOS or UEFI firmware setup screen and check its boot order setting, ensuring that it’s set to boot from its hard drive. If the hard drive doesn’t appear in the list at all, it’s possible your hard drive has failed and can no longer be booted from. In this case, you may want to insert Windows installation or recovery media and run the Startup Repair operation. This will attempt to make Windows bootable again. For example, if something overwrote your Windows drive’s boot sector, this will repair the boot sector. If the recovery environment won’t load or doesn’t see your hard drive, you likely have a hardware problem. Be sure to check your BIOS or UEFI’s boot order first if the recovery environment won’t load. You can also attempt to manually fix Windows boot loader problems using the fixmbr and fixboot commands. Modern versions of Windows should be able to fix this problem for you with the Startup Repair wizard, so you shouldn’t actually have to run these commands yourself. Windows Freezes or Crashes During Boot If Windows seems to start booting but fails partway through, you may be facing either a software or hardware problem. If it’s a software problem, you may be able to fix it by performing a Startup Repair operation. If you can’t do this from the boot menu, insert a Windows installation disc or recovery disk and use the startup repair tool from there. If this doesn’t help at all, you may want to reinstall Windows or perform a Refresh or Reset on Windows 8. If the computer encounters errors while attempting to perform startup repair or reinstall Windows, or the reinstall process works properly and you encounter the same errors afterwards, you likely have a hardware problem. Windows Starts and Blue Screens or Freezes If Windows crashes or blue-screens on you every time it boots, you may be facing a hardware or software problem. For example, malware or a buggy driver may be loading at boot and causing the crash, or your computer’s hardware may be malfunctioning. To test this, boot your Windows computer in safe mode. In safe mode, Windows won’t load typical hardware drivers or any software that starts automatically at startup. If the computer is stable in safe mode, try uninstalling any recently installed hardware drivers, performing a system restore, and scanning for malware. If you’re lucky, one of these steps may fix your software problem and allow you to boot Windows normally. If your problem isn’t fixed, try reinstalling Windows or performing a Refresh or Reset on Windows 8. This will reset your computer back to its clean, factory-default state. If you’re still experiencing crashes, your computer likely has a hardware problem. Recover Files When Windows Won’t Boot If you have important files that will be lost and want to back them up before reinstalling Windows, you can use a Windows installer disc or Linux live media to recover the files. These run entirely from a CD, DVD, or USB drive and allow you to copy your files to another external media, such as another USB stick or an external hard drive. If you’re incapable of booting a Windows installer disc or Linux live CD, you may need to go into your BIOS or UEFI and change the boot order setting. If even this doesn’t work — or if you can boot from the devices and your computer freezes or you can’t access your hard drive — you likely have a hardware problem. You can try pulling the computer’s hard drive, inserting it into another computer, and recovering your files that way. Following these steps should fix the vast majority of Windows boot issues — at least the ones that are actually fixable. The dark cloud that always hangs over such issues is the possibility that the hard drive or another component in the computer may be failing. Image Credit: Karl-Ludwig G. Poggemann on Flickr, Tzuhsun Hsu on Flickr

Read the article

When Less is More

- by aditya.agarkar

How do you reconcile the fact that while the overall warehouse volume is down you still need more workers in the warehouse to ship all the orders? A WMS customer recently pointed out this seemingly perplexing fact in a customer conference. So what is going on? Didn't we tell you before that for a warehouse the customer is really the "king"? In this case customers are merely responding to a low overall low demand and uncertainty. They do not want to hold down inventory and one of the ways to do that is by decreasing the order size and ordering more frequently. Overall impact to the warehouse? Two words: "More work!!" This is not all. Smaller order sizes also mean challenges from a transportation perspective including a rise in costlier parcel or LTL shipments instead of cheaper TL shipments. Here is a hypothetical scenario where a customer reduces the order size by 10% and increases the order frequency by 10%. As you can see in the following table, the overall volume declines by 1% but the warehouse has to ship roughly 10% more lines. Order Frequency (Line Count)Order Size (Units)Total VolumeChange (%)10010010,000 -110909,900-1% If you want to see how "Less is More" in graphical terms, this is how it appears: Even though the volume is down, there is going to be more work in the warehouse in terms of number of lines shipped. The operators need to pick more discrete orders, pack them into more shipping containers and ship more deliveries. What do you do differently if you are facing this situation?In this case here are some obvious steps to take:Uno: Change your pick methods. If you are used to doing order picks, it needs to go out the door. You need to evaluate batch picking and grouping techniques. Go for cluster picking, go for zone picking, pick and pass...anything that improves your picker productivity. More than anything, cluster picking works like a charm and above all, its simple and very effective. Dos: Are you minimize "touch" points in your pick process? Consider doing one step pick, pack and confirm i.e. pick and pack stuff directly into shipping cartons. Done correctly the container will not require any more "touch" points all the way to the trailer loading. Use cartonization!Tres: Are the being picked from an optimized pick face? Are the items slotted correctly? This needs to be looked into. Consider automated "pull" or "push" replenishment into your pick face and also make sure that high demand items are occupying the golden zones. Cuatro: Are you tracking labor productivity? If not there needs to be a concerted push for having labor standards in place. Hope you found these ideas useful.

Read the article

Shutdown Hangs for 5 Minutes on Kubuntu 14.04

- by Augustinus

I've had persistent problems with a 5 minute hang at shutdown for the last three versions of Kubuntu (13.04, 13.10, and now 14.04). I suspect this is not a KDE-specific problem. Recently, I performed a fresh installation of Kubuntu 14.04 from a live-USB, and shutdown worked normally for about a week. The hang-up is now happening again, and I can't figure out why. A brief description of the problem: The hang-up occurs with all methods of initiating a normal shutdown: Clicking the shutdown or restart button in KDE, sudo shutdown -h now, sudo reboot The shutdown splash screen appears. Using the down-arrow to access verbose messages, I see "Asking all remaining processes to terminate." This message remains for 5 minutes with no disk activity. Finally, a rapid series of messages flurries to the screen: * All processes ended within 300 seconds... [ OK ] nm-dispatcher.action: Caught signal 15, shutting down... ModemManager[852]: <warn> Could not acquire the 'org.freedesktop.ModemManager1' service name ModemManager[852]: <info> ModemManager is shut down * Deactivating swap... [ OK ] * Unmounting local filesystems... [ OK ] * Will now restart` Possible Sources of the Problem: Before the problem re-appeared, I have mainly been doing routine computing. I have kept the system up-to-date using apt-get upgrade and apt-get dist-upgrade. The only other notable incident was a power failure. I do not have the computer connected to a UPS, so the power failure resulted in an immediate shutdown. Could this have corrupted an important file which must be accessed at shutdown? Is there any way that could cause a 5-minute hang-up? Here is a list of packages that have been updated before the problem appeared: bash iotop dpkg dpkg-dev python3-software-properties libdpkg-perl software-properties-kde software-properties-common akonadi-backend-mysql libakonadiprotocolinternals1 akonadi-server firefox-locale-en firefox flashplugin-installer libqapt2 libqapt2-runtime thunderbird openjdk-7-jre-headless thunderbird-locale-en kubuntu-driver-manager qapt-deb-installer openjdk-7-jre qapt-batch icedtea-7-jre-jamvm libelf1 dpkg dpkg-dev libdpkg-perl libjbig0 gettext-base libgettextpo-dev libssl1.0.0 libgettextpo0 libasprintf-dev linux-headers-3.13.0-24 gettext libasprintf0c2 linux-headers-3.13.0-24-generic openssl linux-libc-dev gstreamer0.10-qapt kubuntu-desktop linux-image-extra-3.13.0-24-generic linux-image-3.13.0-24-generic I would appreciate any help with this.

Read the article

Build an Organization Chart In Visio 2010

- by Mysticgeek

With trying to manage a business these days, it’s very important to have an Organization Chart to keep everything manageable. Here we’ll show you how to build one in Visio 2010. This Guest Article was written by our friends over at Office 2010 Club. Need for Organization Charts The need of creating Organization Charts are becoming indispensable these days, as companies start focusing on extensive hiring for far reach availability, increase in productivity and targeting diverse markets. Considering this rigorous change, creating an organization chart can help stakeholders in comprehending the ever growing organization structure & hierarchy with an ease. It shows the basic structure of organization along with defining the relationships between employees working in different departments. Opportunely, Microsoft Visio 2010 offers an easy way to create Organization chart. As before now, orthodox ways of listing organization hierarchy have been used for defining the structure of departments along with communication possible including; horizontal and vertical communications. To transform these lists which defines organizational structure, into a detailed chart, Visio 2010 includes an add-in for importing Excel spreadsheet, which comes in handy for pulling out data from spreadsheet to create an organization chart. Importantly, you don’t need to indulge yourself in maze of defining organizational hierarchies and chalking-out structure, as you just need to specify the column & row headers, along with data you need to import and it will automatically create out chart defining; organizational hierarchies with specified credentials of each employee, categorized in their corresponding departments. Creating Organization Charts in Visio 2010 To start off with, we have created an Excel spreadsheet having fields, Name, Supervisor, Designation, Department and Phone. The Name field contains name of all the employees working in different departments, whereas Supervisor field contains name of supervisors or team leads. This field is vital for creating Organization Chart, as it defines the basic structure & hierarchy in chart. Now launch Visio 2010, head over to View tab, under Add-Ons menu, from Business options, click Organization Chart Wizard. This will start Organization Chart Wizard, in the first step, enable Information that’s already stored in a file or database option, and click Next. As we are importing Excel sheet, select the second option for importing Excel spreadsheet. Specify the Excel file path and click Next to continue. In this step, you need to specify the fields which actually defines the structure of an organization. In our case, these are Name & Supervisor fields. After specifying fields, click Next to Proceed further. As organization chart is primarily for showing the hierarchy of departments/employees working in organization along with how they are linked together, and who supervises whom. Considering this, in this step we will leave out Supervisor field, because it’s inclusion wouldn’t be necessary as Visio automatically chalks-out the basic structure defined in Excel sheet. Add the rest of the fields under Displayed fields category, and click Next. Now choose the fields which you want to include in Organization Chart’s shapes and click Next. This step is about breaking the chart into multiple pages, if you are dealing with 100+ employees, you may want to specify numbers of pages on which Organization Chart will be displayed. But in our case, we are dealing with much less amount of data, so we will enable I want the wizard to automatically break my organization chart across pages option. Specify the name you need to show on the top of the page. If you are having less than 20 hierarchies, enter the name of the highest ranked employee in organization and click Finish to end the wizard. It will instantly create an Organization chart out of specified Excel spreadsheet. Highest ranked employee will be shown on top of the organization chart, supervising various employees from different departments. As shown below, his immediate subordinates further manages other employees and so on. For advance customizations, head over to Org Chart tab, here you will find different groups for setting up the Org Chart’s hierarchy and manage other employees’ positions. Under Arrange group, shapes’ arrangements can be changed and it provides easy navigation through the chart. You can also change the type of the position and hide subordinates of selected employee. From Picture group, you can insert a picture of the employees, departments, etc. From synchronization group, you have the option of creating a synced copy and expanding subordinates of selected employee. Under Organization Data group, you can change whole layout of Organization chart from Display Options including; shape display, show divider, enable/disable imported fields, change block position, and fill colors, etc. If at any point of time, you need to insert new position or announce vacancy, Organization Chart stencil is always available on the left sidebar. Drag the desired Organization Chart shape into main diagram page, to maintain the structure integrity, i.e, for inserting subordinates for a specific employee, drag the position shape over the existing employee shape box. For instance, We have added a consultant in organization, who is directly under CEO, for maintaining this, we have dragged the Consultant box and just dropped it over the CEO box to make the immediate subordinate position. Adding details to new position is a cinch, just right-click new position box and click Properties. This will open up Shape Data dialog, start filling in all the relevant information and click OK. Here you can see the newly created position is easily populated with all the specified information. Now expanding an Organization Chart doesn’t require maintenance of long lists any more. Under Design tab, you can also try out different designs & layouts over organization chart to make it look more flamboyant and professional. Conclusion An Organization Chart is a great way of showing detailed organizational hierarchies; with defined credentials of employees, departments structure, new vacancies, newly hired employees, recently added departments, and importantly shows most convenient way of interaction between different departments & employees, etc. Similar Articles Productive Geek Tips Geek Reviews: Using Dia as a Free Replacement for Microsoft VisioMysticgeek Blog: Create Appealing Charts In Excel 2007Create Charts in Excel 2007 the Easy Way with Chart AdvisorCreate a Hyperlink in a Word 2007 Flow Chart and Hide Annoying ScreenTipsCreate A Flow Chart In Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace Steve Jobs’ iPhone 4 Keynote Video

Read the article

SQL SERVER – A Quick Look at Logging and Ideas around Logging

- by pinaldave

This blog post is written in response to the T-SQL Tuesday post on Logging. When someone talks about logging, personally I get lots of ideas about it. I have seen logging as a very generic term. Let me ask you this question first before I continue writing about logging. What is the first thing comes to your mind when you hear word “Logging”? Now ask the same question to the guy standing next to you. I am pretty confident that you will get a different answer from different people. I decided to do this activity and asked 5 SQL Server person the same question. Question: What is the first thing comes to your mind when you hear the word “Logging”? Strange enough I got a different answer every single time. Let me just list what answer I got from my friends. Let us go over them one by one. Output Clause The very first person replied output clause. Pretty interesting answer to start with. I see what exactly he was thinking. SQL Server 2005 has introduced a new OUTPUT clause. OUTPUT clause has access to inserted and deleted tables (virtual tables) just like triggers. OUTPUT clause can be used to return values to client clause. OUTPUT clause can be used with INSERT, UPDATE, or DELETE to identify the actual rows affected by these statements. Here are some references for Output Clause: OUTPUT Clause Example and Explanation with INSERT, UPDATE, DELETE Reasons for Using Output Clause – Quiz Tips from the SQL Joes 2 Pros Development Series – Output Clause in Simple Examples Error Logs I was expecting someone to mention Error logs when it is about logging. The error log is the most looked place when there is any error either with the application or there is an error with the operating system. I have kept the policy to check my server’s error log every day. The reason is simple – enough time in my career I have figured out that when I am looking at error logs I find something which I was not expecting. There are cases, when I noticed errors in the error log and I fixed them before end user notices it. Other common practices I always tell my DBA friends to do is that when any error happens they should find relevant entries in the error logs and document the same. It is quite possible that they will see the same error in the error log and able to fix the error based on the knowledge base which they have created. There can be many different kinds of error log files exists in SQL Server as well – 1) SQL Server Error Logs 2) Windows Event Log 3) SQL Server Agent Log 4) SQL Server Profile Log 5) SQL Server Setup Log etc. Here are some references for Error Logs: Recycle Error Log – Create New Log file without Server Restart SQL Error Messages Change Data Capture I got surprised with this answer. I think more than the answer I was surprised by the person who had answered me this one. I always thought he was expert in HTML, JavaScript but I guess, one should never assume about others. Indeed one of the cool logging feature is Change Data Capture. Change Data Capture records INSERTs, UPDATEs, and DELETEs applied to SQL Server tables, and makes a record available of what changed, where, and when, in simple relational ‘change tables’ rather than in an esoteric chopped salad of XML. These change tables contain columns that reflect the column structure of the source table you have chosen to track, along with the metadata needed to understand the changes that have been made. Here are some references for Change Data Capture: Introduction to Change Data Capture (CDC) in SQL Server 2008 Tuning the Performance of Change Data Capture in SQL Server 2008 Download Script of Change Data Capture (CDC) CDC and TRUNCATE – Cannot truncate table because it is published for replication or enabled for Change Data Capture Dynamic Management View (DMV) I like this answer. If asked I would have not come up with DMV right away but in the spirit of the original question, I think DMV does log the data. DMV logs or stores or records the various data and activity on the SQL Server. Dynamic management views return server state information that can be used to monitor the health of a server instance, diagnose problems, and tune performance. One can get plethero of information from DMVs – High Availability Status, Query Executions Details, SQL Server Resources Status etc. Here are some references for Dynamic Management View (DMV): SQL SERVER – Denali – DMV Enhancement – sys.dm_exec_query_stats – New Columns DMV – sys.dm_os_windows_info – Information about Operating System DMV – sys.dm_os_wait_stats Explanation – Wait Type – Day 3 of 28 DMV sys.dm_exec_describe_first_result_set_for_object – Describes the First Result Metadata for the Module Transaction Log Impact Detection Using DMV – dm_tran_database_transactions Log Files I almost flipped with this final answer from my friend. This should be probably the first answer. Yes, indeed log file logs the SQL Server activities. One can write infinite things about log file. SQL Server uses log file with the extension .ldf to manage transactions and maintain database integrity. Log file ensures that valid data is written out to database and system is in a consistent state. Log files are extremely useful in case of the database failures as with the help of full backup file database can be brought in the desired state (point in time recovery is also possible). SQL Server database has three recovery models – 1) Simple, 2) Full and 3) Bulk Logged. Each of the model uses the .ldf file for performing various activities. It is very important to take the backup of the log files (along with full backup) as one never knows when backup of the log file come into the action and save the day! How to Stop Growing Log File Too Big Reduce the Virtual Log Files (VLFs) from LDF file Log File Growing for Model Database – model Database Log File Grew Too Big master Database Log File Grew Too Big SHRINKFILE and TRUNCATE Log File in SQL Server 2008 Can I just say I loved this month’s T-SQL Tuesday Question. It really provoked very interesting conversation around me. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Optimization, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

New Features in ASP.NET Web API 2 - Part I

- by dwahlin

I’m a big fan of ASP.NET Web API. It provides a quick yet powerful way to build RESTful HTTP services that can easily be consumed by a variety of clients. While it’s simple to get started using, it has a wealth of features such as filters, formatters, and message handlers that can be used to extend it when needed. In this post I’m going to provide a quick walk-through of some of the key new features in version 2. I’ll focus on some two of my favorite features that are related to routing and HTTP responses and cover additional features in a future post. Attribute Routing Routing has been a core feature of Web API since it’s initial release and something that’s built into new Web API projects out-of-the-box. However, there are a few scenarios where defining routes can be challenging such as nested routes (more on that in a moment) and any situation where a lot of custom routes have to be defined. For this example, let’s assume that you’d like to define the following nested route: /customers/1/orders This type of route would select a customer with an Id of 1 and then return all of their orders. Defining this type of route in the standard WebApiConfig class is certainly possible, but it isn’t the easiest thing to do for people who don’t understand routing well. Here’s an example of how the route shown above could be defined: public static class WebApiConfig { public static void Register(HttpConfiguration config) { config.Routes.MapHttpRoute( name: "CustomerOrdersApiGet", routeTemplate: "api/customers/{custID}/orders", defaults: new { custID = 0, controller = "Customers", action = "Orders" } ); config.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); GlobalConfiguration.Configuration.Formatters.Insert(0, new JsonpFormatter()); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } With attribute based routing, defining these types of nested routes is greatly simplified. To get started you first need to make a call to the new MapHttpAttributeRoutes() method in the standard WebApiConfig class (or a custom class that you may have created that defines your routes) as shown next: public static class WebApiConfig { public static void Register(HttpConfiguration config) { // Allow for attribute based routes config.MapHttpAttributeRoutes(); config.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); } } Once attribute based routes are configured, you can apply the Route attribute to one or more controller actions. Here’s an example: [HttpGet] [Route("customers/{custId:int}/orders")] public List<Order> Orders(int custId) { var orders = _Repository.GetOrders(custId); if (orders == null) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.NotFound)); } return orders; } This example maps the custId route parameter to the custId parameter in the Orders() method and also ensures that the route parameter is typed as an integer. The Orders() method can be called using the following route: /customers/2/orders While this is extremely easy to use and gets the job done, it doesn’t include the default “api” string on the front of the route that you might be used to seeing. You could add “api” in front of the route and make it “api/customers/{custId:int}/orders” but then you’d have to repeat that across other attribute-based routes as well. To simply this type of task you can add the RoutePrefix attribute above the controller class as shown next so that “api” (or whatever the custom starting point of your route is) is applied to all attribute routes: [RoutePrefix("api")] public class CustomersController : ApiController { [HttpGet] [Route("customers/{custId:int}/orders")] public List<Order> Orders(int custId) { var orders = _Repository.GetOrders(custId); if (orders == null) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.NotFound)); } return orders; } } There’s much more that you can do with attribute-based routing in ASP.NET. Check out the following post by Mike Wasson for more details. Returning Responses with IHttpActionResult The first version of Web API provided a way to return custom HttpResponseMessage objects which were pretty easy to use overall. However, Web API 2 now wraps some of the functionality available in version 1 to simplify the process even more. A new interface named IHttpActionResult (similar to ActionResult in ASP.NET MVC) has been introduced which can be used as the return type for Web API controller actions. To return a custom response you can use new helper methods exposed through ApiController such as: Ok NotFound Exception Unauthorized BadRequest Conflict Redirect InvalidModelState Here’s an example of how IHttpActionResult and the helper methods can be used to cleanup code. This is the typical way to return a custom HTTP response in version 1: public HttpResponseMessage Delete(int id) { var status = _Repository.DeleteCustomer(id); if (status) { return new HttpResponseMessage(HttpStatusCode.OK); } else { throw new HttpResponseException(HttpStatusCode.NotFound); } } With version 2 we can replace HttpResponseMessage with IHttpActionResult and simplify the code quite a bit: public IHttpActionResult Delete(int id) { var status = _Repository.DeleteCustomer(id); if (status) { //return new HttpResponseMessage(HttpStatusCode.OK); return Ok(); } else { //throw new HttpResponseException(HttpStatusCode.NotFound); return NotFound(); } } You can also cleanup post (insert) operations as well using the helper methods. Here’s a version 1 post action: public HttpResponseMessage Post([FromBody]Customer cust) { var newCust = _Repository.InsertCustomer(cust); if (newCust != null) { var msg = new HttpResponseMessage(HttpStatusCode.Created); msg.Headers.Location = new Uri(Request.RequestUri + newCust.ID.ToString()); return msg; } else { throw new HttpResponseException(HttpStatusCode.Conflict); } } This is what the code looks like in version 2: public IHttpActionResult Post([FromBody]Customer cust) { var newCust = _Repository.InsertCustomer(cust); if (newCust != null) { return Created<Customer>(Request.RequestUri + newCust.ID.ToString(), newCust); } else { return Conflict(); } } More details on IHttpActionResult and the different helper methods provided by the ApiController base class can be found here. Conclusion Although there are several additional features available in Web API 2 that I could cover (CORS support for example), this post focused on two of my favorites features. If you have .NET 4.5.1 available then I definitely recommend checking the new features out. Additional articles that cover features in ASP.NET Web API 2 can be found here.

Read the article

C#: Optional Parameters - Pros and Pitfalls

- by James Michael Hare

When Microsoft rolled out Visual Studio 2010 with C# 4, I was very excited to learn how I could apply all the new features and enhancements to help make me and my team more productive developers. Default parameters have been around forever in C++, and were intentionally omitted in Java in favor of using overloading to satisfy that need as it was though that having too many default parameters could introduce code safety issues. To some extent I can understand that move, as I’ve been bitten by default parameter pitfalls before, but at the same time I feel like Java threw out the baby with the bathwater in that move and I’m glad to see C# now has them. This post briefly discusses the pros and pitfalls of using default parameters. I’m avoiding saying cons, because I really don’t believe using default parameters is a negative thing, I just think there are things you must watch for and guard against to avoid abuses that can cause code safety issues. Pro: Default Parameters Can Simplify Code Let’s start out with positives. Consider how much cleaner it is to reduce all the overloads in methods or constructors that simply exist to give the semblance of optional parameters. For example, we could have a Message class defined which allows for all possible initializations of a Message: 1: public class Message 2: { 3: // can either cascade these like this or duplicate the defaults (which can introduce risk) 4: public Message() 5: : this(string.Empty) 6: { 7: } 8: 9: public Message(string text) 10: : this(text, null) 11: { 12: } 13: 14: public Message(string text, IDictionary<string, string> properties) 15: : this(text, properties, -1) 16: { 17: } 18: 19: public Message(string text, IDictionary<string, string> properties, long timeToLive) 20: { 21: // ... 22: } 23: } Now consider the same code with default parameters: 1: public class Message 2: { 3: // can either cascade these like this or duplicate the defaults (which can introduce risk) 4: public Message(string text = "", IDictionary<string, string> properties = null, long timeToLive = -1) 5: { 6: // ... 7: } 8: } Much more clean and concise and no repetitive coding! In addition, in the past if you wanted to be able to cleanly supply timeToLive and accept the default on text and properties above, you would need to either create another overload, or pass in the defaults explicitly. With named parameters, though, we can do this easily: 1: var msg = new Message(timeToLive: 100); Pro: Named Parameters can Improve Readability I must say one of my favorite things with the default parameters addition in C# is the named parameters. It lets code be a lot easier to understand visually with no comments. Think how many times you’ve run across a TimeSpan declaration with 4 arguments and wondered if they were passing in days/hours/minutes/seconds or hours/minutes/seconds/milliseconds. A novice running through your code may wonder what it is. Named arguments can help resolve the visual ambiguity: 1: // is this days/hours/minutes/seconds (no) or hours/minutes/seconds/milliseconds (yes) 2: var ts = new TimeSpan(1, 2, 3, 4); 3: 4: // this however is visually very explicit 5: var ts = new TimeSpan(days: 1, hours: 2, minutes: 3, seconds: 4); Or think of the times you’ve run across something passing a Boolean literal and wondered what it was: 1: // what is false here? 2: var sub = CreateSubscriber(hostname, port, false); 3: 4: // aha! Much more visibly clear 5: var sub = CreateSubscriber(hostname, port, isBuffered: false); Pitfall: Don't Insert new Default Parameters In Between Existing Defaults Now let’s consider a two potential pitfalls. The first is really an abuse. It’s not really a fault of the default parameters themselves, but a fault in the use of them. Let’s consider that Message constructor again with defaults. Let’s say you want to add a messagePriority to the message and you think this is more important than a timeToLive value, so you decide to put messagePriority before it in the default, this gives you: 1: public class Message 2: { 3: public Message(string text = "", IDictionary<string, string> properties = null, int priority = 5, long timeToLive = -1) 4: { 5: // ... 6: } 7: } Oh boy have we set ourselves up for failure! Why? Think of all the code out there that could already be using the library that already specified the timeToLive, such as this possible call: 1: var msg = new Message(“An error occurred”, myProperties, 1000); Before this specified a message with a TTL of 1000, now it specifies a message with a priority of 1000 and a time to live of -1 (infinite). All of this with NO compiler errors or warnings. So the rule to take away is if you are adding new default parameters to a method that’s currently in use, make sure you add them to the end of the list or create a brand new method or overload. Pitfall: Beware of Default Parameters in Inheritance and Interface Implementation Now, the second potential pitfalls has to do with inheritance and interface implementation. I’ll illustrate with a puzzle: 1: public interface ITag 2: { 3: void WriteTag(string tagName = "ITag"); 4: } 5: 6: public class BaseTag : ITag 7: { 8: public virtual void WriteTag(string tagName = "BaseTag") { Console.WriteLine(tagName); } 9: } 10: 11: public class SubTag : BaseTag 12: { 13: public override void WriteTag(string tagName = "SubTag") { Console.WriteLine(tagName); } 14: } 15: 16: public static class Program 17: { 18: public static void Main() 19: { 20: SubTag subTag = new SubTag(); 21: BaseTag subByBaseTag = subTag; 22: ITag subByInterfaceTag = subTag; 23: 24: // what happens here? 25: subTag.WriteTag(); 26: subByBaseTag.WriteTag(); 27: subByInterfaceTag.WriteTag(); 28: } 29: } What happens? Well, even though the object in each case is SubTag whose tag is “SubTag”, you will get: 1: SubTag 2: BaseTag 3: ITag Why? Because default parameter are resolved at compile time, not runtime! This means that the default does not belong to the object being called, but by the reference type it’s being called through. Since the SubTag instance is being called through an ITag reference, it will use the default specified in ITag. So the moral of the story here is to be very careful how you specify defaults in interfaces or inheritance hierarchies. I would suggest avoiding repeating them, and instead concentrating on the layer of classes or interfaces you must likely expect your caller to be calling from. For example, if you have a messaging factory that returns an IMessage which can be either an MsmqMessage or JmsMessage, it only makes since to put the defaults at the IMessage level since chances are your user will be using the interface only. So let’s sum up. In general, I really love default and named parameters in C# 4.0. I think they’re a great tool to help make your code easier to read and maintain when used correctly. On the plus side, default parameters: Reduce redundant overloading for the sake of providing optional calling structures. Improve readability by being able to name an ambiguous argument. But remember to make sure you: Do not insert new default parameters in the middle of an existing set of default parameters, this may cause unpredictable behavior that may not necessarily throw a syntax error – add to end of list or create new method. Be extremely careful how you use default parameters in inheritance hierarchies and interfaces – choose the most appropriate level to add the defaults based on expected usage. Technorati Tags: C#,.NET,Software,Default Parameters

Read the article

Silverlight Cream for June 03, 2010 -- #875

- by Dave Campbell

In this Issue: Ben Hodson, Fons Sonnemans, SilverLaw, Mike Snow, John Papa, René Schulte, Walt Ritscher, and David Anson. Shoutouts: René Schulte announced a whole batch of new features for WriteableBitmap that are now available: Filled To The Bursting Point - WriteableBitmapEx 0.9.5.0 Check out John Papa's Sticky Seesmic Desktop Plugin ... download it, play with it... he's going to blog about building plugins later Tim Heuer reported a Silverlight 4 minor update–June 2010 Erik Mork and Crew have a new Podcast up: This Week in Silverlight: Redmond Exodus? From SilverlightCream.com: Tutorial for Configuring Silverlight 4, Entity Framework and WCF RIA Services in Separate Component Assemblies (DLL’s) Ben Hodson is a new author(to me) that submitted his post at SilverlightCream.com... this is a good-looking tutorial on configuring separate component assemblies for all your project pieces. SpiralText in Silverlight 4 Fons Sonnemans had a good time playing with the PathListBox in Blend and produced a demo of text on a Spiral... you can run it right on the post, then grab the code. How To: Starting A Storyboard Not Before The Application Has Completed Loading - Silverlight 4 SilverLaw takes a look at the problem of having a Storyboard start too early, and demonstrates code to avoid the problem. Silverlight Tip of the Day#27 – Displaying Special Characters in XAML Mike Snow's latest Tip of the day is on encoding 'special' characters for use in XAML... simple looking at it, frustrating to debug if you don't do it right. Diving into the RichTextBox (Silverlight TV #31) John Papa talks about the RichTextBox with Mark Rideout in this edition of Silverlight TV. Mark provides a great video tutorial for the control. Push and Pull - Silverlight Webcam Capturing Details Boy, René Schulte doesn't slow down does he?... his latest is (in his words from a section heading) "Silverlight Webcam 101" ... and he means it... this is one to save to OneNote or as a PDF! Looking for Silverlight BiDi or RTL? Use the FlowDirection property If you need RTL or BiDi in Silverlight and you haven't checked it out yet, Walt Ritscher has a nice intro up on using the FlowDirection property, with demos and code. How to: Show text labels on a numeric axis with Silverlight/WPF Toolkit Charting David Anson has another charting puzzle resolved on his site... putting text labels on the dependent axis. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

SPARC T4-4 Beats 8-CPU IBM POWER7 on TPC-H @3000GB Benchmark

- by Brian

Oracle's SPARC T4-4 server delivered a world record TPC-H @3000GB benchmark result for systems with four processors. This result beats eight processor results from IBM (POWER7) and HP (x86). The SPARC T4-4 server also delivered better performance per core than these eight processor systems from IBM and HP. Comparisons below are based upon system to system comparisons, highlighting Oracle's complete software and hardware solution. This database world record result used Oracle's Sun Storage 2540-M2 arrays (rotating disk) connected to a SPARC T4-4 server running Oracle Solaris 11 and Oracle Database 11g Release 2 demonstrating the power of Oracle's integrated hardware and software solution. The SPARC T4-4 server based configuration achieved a TPC-H scale factor 3000 world record for four processor systems of 205,792 QphH@3000GB with price/performance of $4.10/QphH@3000GB. The SPARC T4-4 server with four SPARC T4 processors (total of 32 cores) is 7% faster than the IBM Power 780 server with eight POWER7 processors (total of 32 cores) on the TPC-H @3000GB benchmark. The SPARC T4-4 server is 36% better in price performance compared to the IBM Power 780 server on the TPC-H @3000GB Benchmark. The SPARC T4-4 server is 29% faster than the IBM Power 780 for data loading. The SPARC T4-4 server is up to 3.4 times faster than the IBM Power 780 server for the Refresh Function. The SPARC T4-4 server with four SPARC T4 processors is 27% faster than the HP ProLiant DL980 G7 server with eight x86 processors on the TPC-H @3000GB benchmark. The SPARC T4-4 server is 52% faster than the HP ProLiant DL980 G7 server for data loading. The SPARC T4-4 server is up to 3.2 times faster than the HP ProLiant DL980 G7 for the Refresh Function. The SPARC T4-4 server achieved a peak IO rate from the Oracle database of 17 GB/sec. This rate was independent of the storage used, as demonstrated by the TPC-H @3000TB benchmark which used twelve Sun Storage 2540-M2 arrays (rotating disk) and the TPC-H @1000TB benchmark which used four Sun Storage F5100 Flash Array devices (flash storage). [*] The SPARC T4-4 server showed linear scaling from TPC-H @1000GB to TPC-H @3000GB. This demonstrates that the SPARC T4-4 server can handle the increasingly larger databases required of DSS systems. [*] The SPARC T4-4 server benchmark results demonstrate a complete solution of building Decision Support Systems including data loading, business questions and refreshing data. Each phase usually has a time constraint and the SPARC T4-4 server shows superior performance during each phase. [*] The TPC believes that comparisons of results published with different scale factors are misleading and discourages such comparisons. Performance Landscape The table lists the leading TPC-H @3000GB results for non-clustered systems. TPC-H @3000GB, Non-Clustered Systems System Processor P/C/T – Memory Composite(QphH) $/perf($/QphH) Power(QppH) Throughput(QthH) Database Available SPARC Enterprise M9000 3.0 GHz SPARC64 VII+ 64/256/256 – 1024 GB 386,478.3 $18.19 316,835.8 471,428.6 Oracle 11g R2 09/22/11 SPARC T4-4 3.0 GHz SPARC T4 4/32/256 – 1024 GB 205,792.0 $4.10 190,325.1 222,515.9 Oracle 11g R2 05/31/12 SPARC Enterprise M9000 2.88 GHz SPARC64 VII 32/128/256 – 512 GB 198,907.5 $15.27 182,350.7 216,967.7 Oracle 11g R2 12/09/10 IBM Power 780 4.1 GHz POWER7 8/32/128 – 1024 GB 192,001.1 $6.37 210,368.4 175,237.4 Sybase 15.4 11/30/11 HP ProLiant DL980 G7 2.27 GHz Intel Xeon X7560 8/64/128 – 512 GB 162,601.7 $2.68 185,297.7 142,685.6 SQL Server 2008 10/13/10 P/C/T = Processors, Cores, Threads QphH = the Composite Metric (bigger is better) $/QphH = the Price/Performance metric in USD (smaller is better) QppH = the Power Numerical Quantity QthH = the Throughput Numerical Quantity The following table lists data load times and refresh function times during the power run. TPC-H @3000GB, Non-Clustered Systems Database Load & Database Refresh System Processor Data Loading(h:m:s) T4Advan RF1(sec) T4Advan RF2(sec) T4Advan SPARC T4-4 3.0 GHz SPARC T4 04:08:29 1.0x 67.1 1.0x 39.5 1.0x IBM Power 780 4.1 GHz POWER7 05:51:50 1.5x 147.3 2.2x 133.2 3.4x HP ProLiant DL980 G7 2.27 GHz Intel Xeon X7560 08:35:17 2.1x 173.0 2.6x 126.3 3.2x Data Loading = database load time RF1 = power test first refresh transaction RF2 = power test second refresh transaction T4 Advan = the ratio of time to T4 time Complete benchmark results found at the TPC benchmark website http://www.tpc.org. Configuration Summary and Results Hardware Configuration: SPARC T4-4 server 4 x SPARC T4 3.0 GHz processors (total of 32 cores, 128 threads) 1024 GB memory 8 x internal SAS (8 x 300 GB) disk drives External Storage: 12 x Sun Storage 2540-M2 array storage, each with 12 x 15K RPM 300 GB drives, 2 controllers, 2 GB cache Software Configuration: Oracle Solaris 11 11/11 Oracle Database 11g Release 2 Enterprise Edition Audited Results: Database Size: 3000 GB (Scale Factor 3000) TPC-H Composite: 205,792.0 QphH@3000GB Price/performance: $4.10/QphH@3000GB Available: 05/31/2012 Total 3 year Cost: $843,656 TPC-H Power: 190,325.1 TPC-H Throughput: 222,515.9 Database Load Time: 4:08:29 Benchmark Description The TPC-H benchmark is a performance benchmark established by the Transaction Processing Council (TPC) to demonstrate Data Warehousing/Decision Support Systems (DSS). TPC-H measurements are produced for customers to evaluate the performance of various DSS systems. These queries and updates are executed against a standard database under controlled conditions. Performance projections and comparisons between different TPC-H Database sizes (100GB, 300GB, 1000GB, 3000GB, 10000GB, 30000GB and 100000GB) are not allowed by the TPC. TPC-H is a data warehousing-oriented, non-industry-specific benchmark that consists of a large number of complex queries typical of decision support applications. It also includes some insert and delete activity that is intended to simulate loading and purging data from a warehouse. TPC-H measures the combined performance of a particular database manager on a specific computer system. The main performance metric reported by TPC-H is called the TPC-H Composite Query-per-Hour Performance Metric (QphH@SF, where SF is the number of GB of raw data, referred to as the scale factor). QphH@SF is intended to summarize the ability of the system to process queries in both single and multiple user modes. The benchmark requires reporting of price/performance, which is the ratio of the total HW/SW cost plus 3 years maintenance to the QphH. A secondary metric is the storage efficiency, which is the ratio of total configured disk space in GB to the scale factor. Key Points and Best Practices Twelve Sun Storage 2540-M2 arrays were used for the benchmark. Each Sun Storage 2540-M2 array contains 12 15K RPM drives and is connected to a single dual port 8Gb FC HBA using 2 ports. Each Sun Storage 2540-M2 array showed 1.5 GB/sec for sequential read operations and showed linear scaling, achieving 18 GB/sec with twelve Sun Storage 2540-M2 arrays. These were stand alone IO tests. The peak IO rate measured from the Oracle database was 17 GB/sec. Oracle Solaris 11 11/11 required very little system tuning. Some vendors try to make the point that storage ratios are of customer concern. However, storage ratio size has more to do with disk layout and the increasing capacities of disks – so this is not an important metric in which to compare systems. The SPARC T4-4 server and Oracle Solaris efficiently managed the system load of over one thousand Oracle Database parallel processes. Six Sun Storage 2540-M2 arrays were mirrored to another six Sun Storage 2540-M2 arrays on which all of the Oracle database files were placed. IO performance was high and balanced across all the arrays. The TPC-H Refresh Function (RF) simulates periodical refresh portion of Data Warehouse by adding new sales and deleting old sales data. Parallel DML (parallel insert and delete in this case) and database log performance are a key for this function and the SPARC T4-4 server outperformed both the IBM POWER7 server and HP ProLiant DL980 G7 server. (See the RF columns above.) See Also Transaction Processing Performance Council (TPC) Home Page Ideas International Benchmark Page SPARC T4-4 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Sun Storage 2540-M2 Array oracle.com OTN Disclosure Statement TPC-H, QphH, $/QphH are trademarks of Transaction Processing Performance Council (TPC). For more information, see www.tpc.org. SPARC T4-4 205,792.0 QphH@3000GB, $4.10/QphH@3000GB, available 5/31/12, 4 processors, 32 cores, 256 threads; IBM Power 780 QphH@3000GB, 192,001.1 QphH@3000GB, $6.37/QphH@3000GB, available 11/30/11, 8 processors, 32 cores, 128 threads; HP ProLiant DL980 G7 162,601.7 QphH@3000GB, $2.68/QphH@3000GB available 10/13/10, 8 processors, 64 cores, 128 threads.

Search Results

Search found 10691 results on 428 pages for 'batch insert'.

Page 261/428 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268 | Next Page >

- by SalimQrdl

- by Leonid Bugaev

- by Sam Langlhey

- by Alexandre GUIDET

- by Ross

- by mbcrump

- by pinaldave

- by Rick Strahl

- by smisner

- by jamiet

- by extended_events

- by Vizioz Limited

- by mike.donohue

- by Phil Factor

- by Rick Strahl

- by Chris Hoffman

- by aditya.agarkar

- by Augustinus

- by Mysticgeek

- by pinaldave

- by dwahlin

- by James Michael Hare

- by Dave Campbell

- by Brian

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268 | Next Page >