Search Results

Search found 18580 results on 744 pages for 'wireless connection'.

Page 261/744 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• openvpn WARNING: No server certificate verification method has been enabled

  - by tmedtcom

  I tried to install openvpn on debian squeez (server) and connect from my fedora 17 as (client). Here is my configuration: server configuration ###cat server.conf # Serveur TCP ** proto tcp** port 1194 dev tun # Cles et certificats ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem # Reseau #Adresse virtuel du reseau vpn server 192.170.70.0 255.255.255.0 #Cette ligne ajoute sur le client la route du reseau vers le serveur push "route 192.168.1.0 255.255.255.0" #Creer une route du server vers l'interface tun. #route 192.170.70.0 255.255.255.0 # Securite keepalive 10 120 #type d'encryptage des données **cipher AES-128-CBC** #activation de la compression comp-lzo #nombre maximum de clients autorisés max-clients 10 #pas d'utilisateur et groupe particuliers pour l'utilisation du VPN user nobody group nogroup #pour rendre la connexion persistante persist-key persist-tun #Log d'etat d'OpenVPN status /var/log/openvpn-status.log #logs openvpnlog /var/log/openvpn.log log-append /var/log/openvpn.log #niveau de verbosité verb 5 ###cat client.conf # Client client dev tun [COLOR="Red"]proto tcp-client[/COLOR] remote <my server wan IP> 1194 resolv-retry infinite **cipher AES-128-CBC** # Cles ca ca.crt cert client.crt key client.key # Securite nobind persist-key persist-tun comp-lzo verb 3 Message from the host client (fedora 17) in the log file / var / log / messages: Dec 6 21:56:00 GlobalTIC NetworkManager[691]: <info> Starting VPN service 'openvpn'... Dec 6 21:56:00 GlobalTIC NetworkManager[691]: <info> VPN service 'openvpn' started (org.freedesktop.NetworkManager.openvpn), PID 7470 Dec 6 21:56:00 GlobalTIC NetworkManager[691]: <info> VPN service 'openvpn' appeared; activating connections Dec 6 21:56:00 GlobalTIC NetworkManager[691]: <info> VPN plugin state changed: starting (3) Dec 6 21:56:01 GlobalTIC NetworkManager[691]: <info> VPN connection 'Connexion VPN 1' (Connect) reply received. Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]: OpenVPN 2.2.2 x86_64-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] built on Sep 5 2012 Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]:[COLOR="Red"][U][B] WARNING: No server certificate verification method has been enabled.[/B][/U][/COLOR] See http://openvpn.net/howto.html#mitm for more info. Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]:[COLOR="Red"] WARNING: file '/home/login/client/client.key' is group or others accessible[/COLOR] Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]: UDPv4 link local: [undef] Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]: UDPv4 link remote: [COLOR="Red"]<my server wan IP>[/COLOR]:1194 Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]: [COLOR="Red"]read UDPv4 [ECONNREFUSED]: Connection refused (code=111)[/COLOR] Dec 6 21:56:03 GlobalTIC nm-openvpn[7472]: [COLOR="Red"]read UDPv4[/COLOR] [ECONNREFUSED]: Connection refused (code=111) Dec 6 21:56:07 GlobalTIC nm-openvpn[7472]: read UDPv4 [ECONNREFUSED]: Connection refused (code=111) Dec 6 21:56:15 GlobalTIC nm-openvpn[7472]: read UDPv4 [ECONNREFUSED]: Connection refused (code=111) Dec 6 21:56:31 GlobalTIC nm-openvpn[7472]: read UDPv4 [ECONNREFUSED]: Connection refused (code=111) Dec 6 21:56:41 GlobalTIC NetworkManager[691]: <warn> VPN connection 'Connexion VPN 1' (IP Conf[/CODE] ifconfig on server host(debian): ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:16:21:ac inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe16:21ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9059 errors:0 dropped:0 overruns:0 frame:0 TX packets:5660 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:919427 (897.8 KiB) TX bytes:1273891 (1.2 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.170.70.1 P-t-P:192.170.70.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on the client host (fedora 17) as0t0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 5.5.0.1 netmask 255.255.252.0 destination 5.5.0.1 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 200 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2 bytes 321 (321.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 as0t1: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 5.5.4.1 netmask 255.255.252.0 destination 5.5.4.1 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 200 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2 bytes 321 (321.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 as0t2: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 5.5.8.1 netmask 255.255.252.0 destination 5.5.8.1 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 200 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2 bytes 321 (321.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 as0t3: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 5.5.12.1 netmask 255.255.252.0 destination 5.5.12.1 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 200 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2 bytes 321 (321.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 **p255p1**: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::21d:baff:fe20:b7e6 prefixlen 64 scopeid 0x20<link> ether 00:1d:ba:20:b7:e6 txqueuelen 1000 (Ethernet) RX packets 4842070 bytes 3579798184 (3.3 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3996158 bytes 2436442882 (2.2 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 16 p255p1 is label for eth0 interface and on the server : root@hoteserver:/etc/openvpn# tree . +-- client ¦** +-- ca.crt ¦** +-- client.conf ¦** +-- client.crt ¦** +-- client.csr ¦** +-- client.key ¦** +-- client.ovpn ¦* ¦** +-- easy-rsa ¦** +-- build-ca ¦** +-- build-dh ¦** +-- build-inter ¦** +-- build-key ¦** +-- build-key-pass ¦** +-- build-key-pkcs12 ¦** +-- build-key-server ¦** +-- build-req ¦** +-- build-req-pass ¦** +-- clean-all ¦** +-- inherit-inter ¦** +-- keys ¦** ¦** +-- 01.pem ¦** ¦** +-- 02.pem ¦** ¦** +-- ca.crt ¦** ¦** +-- ca.key ¦** ¦** +-- client.crt ¦** ¦** +-- client.csr ¦** ¦** +-- client.key ¦** ¦** +-- dh1024.pem ¦** ¦** +-- index.txt ¦** ¦** +-- index.txt.attr ¦** ¦** +-- index.txt.attr.old ¦** ¦** +-- index.txt.old ¦** ¦** +-- serial ¦** ¦** +-- serial.old ¦** ¦** +-- server.crt ¦** ¦** +-- server.csr ¦** ¦** +-- server.key ¦** +-- list-crl ¦** +-- Makefile ¦** +-- openssl-0.9.6.cnf.gz ¦** +-- openssl.cnf ¦** +-- pkitool ¦** +-- README.gz ¦** +-- revoke-full ¦** +-- sign-req ¦** +-- vars ¦** +-- whichopensslcnf +-- openvpn.log +-- openvpn-status.log +-- server.conf +-- update-resolv-conf on the client: [login@hoteclient openvpn]$ tree . |-- easy-rsa | |-- 1.0 | | |-- build-ca | | |-- build-dh | | |-- build-inter | | |-- build-key | | |-- build-key-pass | | |-- build-key-pkcs12 | | |-- build-key-server | | |-- build-req | | |-- build-req-pass | | |-- clean-all | | |-- list-crl | | |-- make-crl | | |-- openssl.cnf | | |-- README | | |-- revoke-crt | | |-- revoke-full | | |-- sign-req | | `-- vars | `-- 2.0 | |-- build-ca | |-- build-dh | |-- build-inter | |-- build-key | |-- build-key-pass | |-- build-key-pkcs12 | |-- build-key-server | |-- build-req | |-- build-req-pass | |-- clean-all | |-- inherit-inter | |-- keys [error opening dir] | |-- list-crl | |-- Makefile | |-- openssl-0.9.6.cnf | |-- openssl-0.9.8.cnf | |-- openssl-1.0.0.cnf | |-- pkitool | |-- README | |-- revoke-full | |-- sign-req | |-- vars | `-- whichopensslcnf |-- keys -> ./easy-rsa/2.0/keys/ `-- server.conf the problem source is cipher AES-128-CBC ,proto tcp-client or UDP or the interface p255p1 on fedora17 or file authentification ta.key is not found ????

  Read the article

• Openvpn plugin openvpn-auth-ldap does not bind to Active Directory

  - by Selivanov Pavel

  I'm trying to configure OpenVPN with openvpn-auth-ldap plugin to authorize users via Active Directory LDAP. When I use the same server config without plugin option, and add client config with generated client key and cert, connection is successful, so problem is in the plugin. server.conf: plugin /usr/lib/openvpn/openvpn-auth-ldap.so "/etc/openvpn-test/openvpn-auth-ldap.conf" port 1194 proto tcp dev tun keepalive 10 60 topology subnet server 10.0.2.0 255.255.255.0 tls-server ca ca.crt dh dh1024.pem cert server.crt key server.key #crl-verify crl.pem persist-key persist-tun user nobody group nogroup verb 3 mute 20 openvpn-auth-ldap.conf: <LDAP> URL ldap://dc1.domain:389 TLSEnable no BindDN cn=bot_auth,cn=Users,dc=domain Password bot_auth Timeout 15 FollowReferrals yes </LDAP> <Authorization> BaseDN "cn=Users,dc=domain" SearchFilter "(sAMAccountName=%u)" RequireGroup false # <Group> # BaseDN "ou=groups,dc=mycompany,dc=local" # SearchFilter "(|(cn=developers)(cn=artists))" # MemberAttribute uniqueMember # </Group> </Authorization> Top-level domain in AD is used by historical reasons. Analogue configuration is working for Apache 2.2 in mod-authzn-ldap. User and password are correct. client.conf: remote server_name port 1194 proto tcp client pull remote-cert-tls server dev tun resolv-retry infinite nobind ca ca.crt ; with keys - works fine #cert test.crt #key test.key ; without keys - by password auth-user-pass persist-tun verb 3 mute 20 In server log there is string PLUGIN_INIT: POST /usr/lib/openvpn/openvpn-auth-ldap.so '[/usr/lib/openvpn/openvpn-auth-ldap.so] [/etc/openvpn-test/openvpn-auth-ldap.conf]' which indicates, that plugin failed. I can telnet to dc1.domain:389, so this is not network/firewall problem. Later server says TLS Error: TLS object -> incoming plaintext read error TLS handshake failed - without plugin it tryes to do usal key authentification. server log: Tue Nov 22 03:06:20 2011 OpenVPN 2.1.3 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Oct 21 2010 Tue Nov 22 03:06:20 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue Nov 22 03:06:20 2011 PLUGIN_INIT: POST /usr/lib/openvpn/openvpn-auth-ldap.so '[/usr/lib/openvpn/openvpn-auth-ldap.so] [/etc/openvpn-test/openvpn-auth-ldap.conf]' intercepted=PLUGIN_AUTH_USER_PASS_VERIFY|PLUGIN_CLIENT_CONNECT|PLUGIN_CLIENT_DISCONNECT Tue Nov 22 03:06:20 2011 Diffie-Hellman initialized with 1024 bit key Tue Nov 22 03:06:20 2011 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Tue Nov 22 03:06:20 2011 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Tue Nov 22 03:06:20 2011 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Nov 22 03:06:20 2011 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Nov 22 03:06:20 2011 TLS-Auth MTU parms [ L:1543 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Nov 22 03:06:20 2011 Socket Buffers: R=[87380->131072] S=[16384->131072] Tue Nov 22 03:06:20 2011 TUN/TAP device tun1 opened Tue Nov 22 03:06:20 2011 TUN/TAP TX queue length set to 100 Tue Nov 22 03:06:20 2011 /sbin/ifconfig tun1 10.0.2.1 netmask 255.255.255.0 mtu 1500 broadcast 10.0.2.255 Tue Nov 22 03:06:20 2011 Data Channel MTU parms [ L:1543 D:1450 EF:43 EB:4 ET:0 EL:0 ] Tue Nov 22 03:06:20 2011 GID set to nogroup Tue Nov 22 03:06:20 2011 UID set to nobody Tue Nov 22 03:06:20 2011 Listening for incoming TCP connection on [undef] Tue Nov 22 03:06:20 2011 TCPv4_SERVER link local (bound): [undef] Tue Nov 22 03:06:20 2011 TCPv4_SERVER link remote: [undef] Tue Nov 22 03:06:20 2011 MULTI: multi_init called, r=256 v=256 Tue Nov 22 03:06:20 2011 IFCONFIG POOL: base=10.0.2.2 size=252 Tue Nov 22 03:06:20 2011 MULTI: TCP INIT maxclients=1024 maxevents=1028 Tue Nov 22 03:06:20 2011 Initialization Sequence Completed Tue Nov 22 03:07:10 2011 MULTI: multi_create_instance called Tue Nov 22 03:07:10 2011 Re-using SSL/TLS context Tue Nov 22 03:07:10 2011 Control Channel MTU parms [ L:1543 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Nov 22 03:07:10 2011 Data Channel MTU parms [ L:1543 D:1450 EF:43 EB:4 ET:0 EL:0 ] Tue Nov 22 03:07:10 2011 Local Options hash (VER=V4): 'c413e92e' Tue Nov 22 03:07:10 2011 Expected Remote Options hash (VER=V4): 'd8421bb0' Tue Nov 22 03:07:10 2011 TCP connection established with [AF_INET]10.0.0.9:47808 Tue Nov 22 03:07:10 2011 TCPv4_SERVER link local: [undef] Tue Nov 22 03:07:10 2011 TCPv4_SERVER link remote: [AF_INET]10.0.0.9:47808 Tue Nov 22 03:07:11 2011 10.0.0.9:47808 TLS: Initial packet from [AF_INET]10.0.0.9:47808, sid=a2cd4052 84b47108 Tue Nov 22 03:07:11 2011 10.0.0.9:47808 TLS_ERROR: BIO read tls_read_plaintext error: error:140890C7:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:peer did not return a certificate Tue Nov 22 03:07:11 2011 10.0.0.9:47808 TLS Error: TLS object -> incoming plaintext read error Tue Nov 22 03:07:11 2011 10.0.0.9:47808 TLS Error: TLS handshake failed Tue Nov 22 03:07:11 2011 10.0.0.9:47808 Fatal TLS error (check_tls_errors_co), restarting Tue Nov 22 03:07:11 2011 10.0.0.9:47808 SIGUSR1[soft,tls-error] received, client-instance restarting Tue Nov 22 03:07:11 2011 TCP/UDP: Closing socket client log: Tue Nov 22 03:06:18 2011 OpenVPN 2.1.3 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Oct 22 2010 Enter Auth Username:user Enter Auth Password: Tue Nov 22 03:06:25 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue Nov 22 03:06:25 2011 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Tue Nov 22 03:06:25 2011 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Nov 22 03:06:25 2011 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Nov 22 03:06:25 2011 Control Channel MTU parms [ L:1543 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Nov 22 03:06:25 2011 Socket Buffers: R=[87380->131072] S=[16384->131072] Tue Nov 22 03:06:25 2011 Data Channel MTU parms [ L:1543 D:1450 EF:43 EB:4 ET:0 EL:0 ] Tue Nov 22 03:06:25 2011 Local Options hash (VER=V4): 'd8421bb0' Tue Nov 22 03:06:25 2011 Expected Remote Options hash (VER=V4): 'c413e92e' Tue Nov 22 03:06:25 2011 Attempting to establish TCP connection with [AF_INET]10.0.0.2:1194 [nonblock] Tue Nov 22 03:06:26 2011 TCP connection established with [AF_INET]10.0.0.2:1194 Tue Nov 22 03:06:26 2011 TCPv4_CLIENT link local: [undef] Tue Nov 22 03:06:26 2011 TCPv4_CLIENT link remote: [AF_INET]10.0.0.2:1194 Tue Nov 22 03:06:26 2011 TLS: Initial packet from [AF_INET]10.0.0.2:1194, sid=7a3c2a0f bd35bca7 Tue Nov 22 03:06:26 2011 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Tue Nov 22 03:06:26 2011 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=Fort-Funston_CA/[email protected] Tue Nov 22 03:06:26 2011 Validating certificate key usage Tue Nov 22 03:06:26 2011 ++ Certificate has key usage 00a0, expects 00a0 Tue Nov 22 03:06:26 2011 VERIFY KU OK Tue Nov 22 03:06:26 2011 Validating certificate extended key usage Tue Nov 22 03:06:26 2011 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication Tue Nov 22 03:06:26 2011 VERIFY EKU OK Tue Nov 22 03:06:26 2011 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=server/[email protected] Tue Nov 22 03:06:26 2011 Connection reset, restarting [0] Tue Nov 22 03:06:26 2011 TCP/UDP: Closing socket Tue Nov 22 03:06:26 2011 SIGUSR1[soft,connection-reset] received, process restarting Tue Nov 22 03:06:26 2011 Restart pause, 5 second(s) ^CTue Nov 22 03:06:27 2011 SIGINT[hard,init_instance] received, process exiting Does anybody know how to get openvpn-auth-ldap wirking?

  Read the article

• Problem using Hibernate-Search

  - by KCore

  Hi, I am using hibernate search for my application. It is well configured and running perfectly till some time back, when it stopped working suddenly. The reason according to me being the number of my model (bean) classes. I have some 90 classes, which I add to my configuration, while building my Hibernate Configuration. When, I disable hibernate search (remove the search annotations and use Configuration instead of AnnotationsConfiguration), I try to start my application, it Works fine. But,the same app when I enable search, it just hangs up. I tried debugging and found the exact place where it hangs. After adding all the class to my AnnotationsConfiguration object, when I say cfg.buildSessionfactory(), It never comes out of that statement. (I have waited for hours!!!) Also when I decrease the number of my model classes (like say to half i.e. 50) it comes out of that statement and the application works fine.. Can Someone tell why is this happening?? My versions of hibernate are: hibernate-core-3.3.1.GA.jar hibernate-annotations-3.4.0.GA.jar hibernate-commons-annotations-3.1.0.GA.jar hibernate-search-3.1.0.GA.jar Also if need to avoid using AnnotationsConfiguration, I read that I need to configure the search event listeners explicitly.. can anyone list all the neccessary listeners and their respective classes? (I tried the standard ones given in Hibernate Search books, but they give me ClassNotFound exception and I have all the neccesarty libs in classpath) Here are the last few lines of hibernate trace I managed to pull : 16:09:32,814 INFO AnnotationConfiguration:369 - Hibernate Validator not found: ignoring 16:09:32,892 INFO ConnectionProviderFactory:95 - Initializing connection provider: org.hibernate.connection.C3P0ConnectionProvider 16:09:32,895 INFO C3P0ConnectionProvider:103 - C3P0 using driver: com.mysql.jdbc.Driver at URL: jdbc:mysql://localhost:3306/autolinkcrmcom_data 16:09:32,898 INFO C3P0ConnectionProvider:104 - Connection properties: {user=root, password=****} 16:09:32,900 INFO C3P0ConnectionProvider:107 - autocommit mode: false 16:09:33,694 INFO SettingsFactory:116 - RDBMS: MySQL, version: 5.1.37-1ubuntu5.1 16:09:33,696 INFO SettingsFactory:117 - JDBC driver: MySQL-AB JDBC Driver, version: mysql-connector-java-3.1.10 ( $Date: 2005/05/19 15:52:23 $, $Revision: 1.1.2.2 $ ) 16:09:33,701 INFO Dialect:175 - Using dialect: org.hibernate.dialect.MySQLDialect 16:09:33,707 INFO TransactionFactoryFactory:59 - Using default transaction strategy (direct JDBC transactions) 16:09:33,709 INFO TransactionManagerLookupFactory:80 - No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended) 16:09:33,711 INFO SettingsFactory:170 - Automatic flush during beforeCompletion(): disabled 16:09:33,714 INFO SettingsFactory:174 - Automatic session close at end of transaction: disabled 16:09:32,814 INFO AnnotationConfiguration:369 - Hibernate Validator not found: ignoring 16:09:32,892 INFO ConnectionProviderFactory:95 - Initializing connection provider: org.hibernate.connection.C3P0ConnectionProvider 16:09:32,895 INFO C3P0ConnectionProvider:103 - C3P0 using driver: com.mysql.jdbc.Driver at URL: jdbc:mysql://localhost:3306/autolinkcrmcom_data 16:09:32,898 INFO C3P0ConnectionProvider:104 - Connection properties: {user=root, password=****} 16:09:32,900 INFO C3P0ConnectionProvider:107 - autocommit mode: false 16:09:33,694 INFO SettingsFactory:116 - RDBMS: MySQL, version: 5.1.37-1ubuntu5.1 16:09:33,696 INFO SettingsFactory:117 - JDBC driver: MySQL-AB JDBC Driver, version: mysql-connector-java-3.1.10 ( $Date: 2005/05/19 15:52:23 $, $Revision: 1.1.2.2 $ ) 16:09:33,701 INFO Dialect:175 - Using dialect: org.hibernate.dialect.MySQLDialect 16:09:33,707 INFO TransactionFactoryFactory:59 - Using default transaction strategy (direct JDBC transactions) 16:09:33,709 INFO TransactionManagerLookupFactory:80 - No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended) 16:09:33,711 INFO SettingsFactory:170 - Automatic flush during beforeCompletion(): disabled 16:09:33,714 INFO SettingsFactory:174 - Automatic session close at end of transaction: disabled 16:09:33,716 INFO SettingsFactory:181 - JDBC batch size: 15 16:09:33,719 INFO SettingsFactory:184 - JDBC batch updates for versioned data: disabled 16:09:33,721 INFO SettingsFactory:189 - Scrollable result sets: enabled 16:09:33,723 DEBUG SettingsFactory:193 - Wrap result sets: disabled 16:09:33,725 INFO SettingsFactory:197 - JDBC3 getGeneratedKeys(): enabled 16:09:33,727 INFO SettingsFactory:205 - Connection release mode: auto 16:09:33,730 INFO SettingsFactory:229 - Maximum outer join fetch depth: 2 16:09:33,732 INFO SettingsFactory:232 - Default batch fetch size: 1000 16:09:33,735 INFO SettingsFactory:236 - Generate SQL with comments: disabled 16:09:33,737 INFO SettingsFactory:240 - Order SQL updates by primary key: disabled 16:09:33,740 INFO SettingsFactory:244 - Order SQL inserts for batching: disabled 16:09:33,742 INFO SettingsFactory:420 - Query translator: org.hibernate.hql.ast.ASTQueryTranslatorFactory 16:09:33,744 INFO ASTQueryTranslatorFactory:47 - Using ASTQueryTranslatorFactory 16:09:33,747 INFO SettingsFactory:252 - Query language substitutions: {} 16:09:33,750 INFO SettingsFactory:257 - JPA-QL strict compliance: disabled 16:09:33,752 INFO SettingsFactory:262 - Second-level cache: enabled 16:09:33,754 INFO SettingsFactory:266 - Query cache: disabled 16:09:33,757 INFO SettingsFactory:405 - Cache region factory : org.hibernate.cache.impl.bridge.RegionFactoryCacheProviderBridge 16:09:33,759 INFO RegionFactoryCacheProviderBridge:61 - Cache provider: net.sf.ehcache.hibernate.EhCacheProvider 16:09:33,762 INFO SettingsFactory:276 - Optimize cache for minimal puts: disabled 16:09:33,764 INFO SettingsFactory:285 - Structured second-level cache entries: disabled 16:09:33,766 INFO SettingsFactory:314 - Statistics: disabled 16:09:33,769 INFO SettingsFactory:318 - Deleted entity synthetic identifier rollback: disabled 16:09:33,771 INFO SettingsFactory:333 - Default entity-mode: pojo 16:09:33,774 INFO SettingsFactory:337 - Named query checking : enabled 16:09:33,869 INFO Version:20 - Hibernate Search 3.1.0.GA 16:09:35,134 DEBUG DocumentBuilderIndexedEntity:157 - Field selection in projections is set to false for entity **com.xyz.abc**. recognized hibernaterecognized hibernaterecognized hibernaterecognized hibernaterecognized hibernaterecognized hibernaterecognized hibernaterecognized hibernaterecognized hibernaterecognized hibernateDocumentBuilderIndexedEntity Donno what the last line indicates ??? (hibernaterecognized....) After the last line it doesnt do anything (no trace too ) and just hangs....

  Read the article

• Hibernate unknown entity (not missing @Entity or import javax.persistence.Entity )

  - by david99world

  I've got a really simple class... import javax.persistence.Column; import javax.persistence.Entity; import javax.persistence.GeneratedValue; import javax.persistence.GenerationType; import javax.persistence.Id; import javax.persistence.Table; @Entity @Table(name = "users") public class User { @Column(name = "firstName") private String firstName; @Column(name = "lastName") private String lastName; @Column(name = "email") private String email; @Id @GeneratedValue(strategy=GenerationType.AUTO) @Column(name = "id") private long id; public String getFirstName() { return firstName; } public void setFirstName(String firstName) { this.firstName = firstName; } public String getLastName() { return lastName; } public void setLastName(String lastName) { this.lastName = lastName; } public String getEmail() { return email; } public void setEmail(String email) { this.email = email; } public long getId() { return id; } public void setId(long id) { this.id = id; } } I call it using... public class Main { /** * @param args */ public static void main(String[] args) { // TODO Auto-generated method stub HibernateUtil.buildSessionFactory(); Session session = HibernateUtil.getSessionFactory().getCurrentSession(); session.beginTransaction(); User u = new User(); u.setEmail("[email protected]"); u.setFirstName("David"); u.setLastName("Gray"); session.save(u); session.getTransaction().commit(); System.out.println("Record committed"); session.close(); } } I keep getting... Exception in thread "main" org.hibernate.MappingException: Unknown entity: org.assessme.com.entity.User at org.hibernate.internal.SessionFactoryImpl.getEntityPersister(SessionFactoryImpl.java:1172) at org.hibernate.internal.SessionImpl.getEntityPersister(SessionImpl.java:1316) at org.hibernate.event.internal.AbstractSaveEventListener.saveWithGeneratedId(AbstractSaveEventListener.java:117) at org.hibernate.event.internal.DefaultSaveOrUpdateEventListener.saveWithGeneratedOrRequestedId(DefaultSaveOrUpdateEventListener.java:204) at org.hibernate.event.internal.DefaultSaveEventListener.saveWithGeneratedOrRequestedId(DefaultSaveEventListener.java:55) at org.hibernate.event.internal.DefaultSaveOrUpdateEventListener.entityIsTransient(DefaultSaveOrUpdateEventListener.java:189) at org.hibernate.event.internal.DefaultSaveEventListener.performSaveOrUpdate(DefaultSaveEventListener.java:49) at org.hibernate.event.internal.DefaultSaveOrUpdateEventListener.onSaveOrUpdate(DefaultSaveOrUpdateEventListener.java:90) at org.hibernate.internal.SessionImpl.fireSave(SessionImpl.java:670) at org.hibernate.internal.SessionImpl.save(SessionImpl.java:662) at org.hibernate.internal.SessionImpl.save(SessionImpl.java:658) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:601) at org.hibernate.context.internal.ThreadLocalSessionContext$TransactionProtectionWrapper.invoke(ThreadLocalSessionContext.java:352) at $Proxy4.save(Unknown Source) at Main.main(Main.java:20) hibernateUtil is... import org.hibernate.SessionFactory; import org.hibernate.cfg.Configuration; import org.hibernate.service.ServiceRegistry; import org.hibernate.service.ServiceRegistryBuilder; public class HibernateUtil { private static SessionFactory sessionFactory; private static ServiceRegistry serviceRegistry; public static SessionFactory buildSessionFactory() { try { // Create the SessionFactory from hibernate.cfg.xml Configuration configuration = new Configuration(); configuration.configure(); serviceRegistry = new ServiceRegistryBuilder().applySettings(configuration.getProperties()).buildServiceRegistry(); return new Configuration().configure().buildSessionFactory(serviceRegistry); } catch (Throwable ex) { // Make sure you log the exception, as it might be swallowed System.err.println("Initial SessionFactory creation failed." + ex); throw new ExceptionInInitializerError(ex); } } public static SessionFactory getSessionFactory() { sessionFactory = new Configuration().configure().buildSessionFactory(serviceRegistry); return sessionFactory; } } does anyone have any ideas as I've looked at so many duplicates but the resolutions don't appear to work for me. hibernate.cfg.xml shown below... <?xml version='1.0' encoding='utf-8'?> <!DOCTYPE hibernate-configuration PUBLIC "-//Hibernate/Hibernate Configuration DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd"> <hibernate-configuration> <session-factory> <!-- Database connection settings --> <property name="connection.driver_class">com.mysql.jdbc.Driver</property> <property name="connection.url">jdbc:mysql://localhost/ssme</property> <property name="connection.username">root</property> <property name="connection.password">mypassword</property> <!-- JDBC connection pool (use the built-in) --> <property name="connection.pool_size">1</property> <!-- SQL dialect --> <property name="dialect">org.hibernate.dialect.MySQLDialect</property> <!-- Enable Hibernate's automatic session context management --> <property name="current_session_context_class">thread</property> <!-- Disable the second-level cache --> <property name="cache.provider_class">org.hibernate.cache.NoCacheProvider</property> <!-- Echo all executed SQL to stdout --> <property name="show_sql">true</property> <!-- Drop and re-create the database schema on startup --> <property name="hbm2ddl.auto">update</property> </session-factory> </hibernate-configuration>

  Read the article

• Disk Drive not working

  - by user287681

  The CD/DVD drive on my sisters' (I'm helping her shift from Win. XP (now officially deprecated by Microsoft) to Ubuntu) system. Now, it may end up being a failed attempt, all together (Almost the whole last year (when she's been on XP) the disk drive hasn't (not even powering on) been working.), I just want to make sure I've explored every remote possibility. Because I figure, "Huh, now that I've got Ubuntu running, instead of XP, that (just) might make a difference.". I have tried using the sudo lshw command in the terminal, to (seemingly) no avil, but, who knows, you might be able to make something out of it. Here's the output: kyra@kyra-Satellite-P105:~$ sudo lshw [sudo] password for kyra: kyra-satellite-p105 description: Notebook product: Satellite P105 () vendor: TOSHIBA version: PSPA0U-0TN01M serial: 96084354W width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=oem-specific chassis=notebook frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=00900559-F88E-D811-82E0-00163680E992 *-core description: Motherboard product: Satellite P105 vendor: TOSHIBA physical id: 0 version: Not Applicable serial: 1234567890 *-firmware description: BIOS vendor: TOSHIBA physical id: 0 version: V4.70 date: 01/19/20092 size: 92KiB capabilities: isa pci pcmcia pnp upgrade shadowing escd cdboot acpi usb biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM)2 CPU T5 slot: U2E1 size: 1667MHz capacity: 1667MHz width: 64 bits clock: 166MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1 Cache size: 16KiB capacity: 16KiB capabilities: asynchronous internal write-back *-cache:1 description: L2 cache physical id: 6 slot: L2 Cache size: 2MiB capabilities: burst external write-back *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB capacity: 3GiB *-bank:0 description: SODIMM DDR2 Synchronous physical id: 0 slot: M1 size: 1GiB width: 64 bits *-bank:1 description: SODIMM DDR2 Synchronous physical id: 1 slot: M2 size: 1GiB width: 64 bits *-pci description: Host bridge product: Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display:0 description: VGA compatible controller product: Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0200000-d027ffff ioport:1800(size=8) memory:c0000000-cfffffff memory:d0300000-d033ffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:d0280000-d02fffff *-multimedia description: Audio device product: NM10/ICH7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d0340000-d0343fff *-pci:0 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:84000000-841fffff ioport:84200000(size=2097152) *-pci:1 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:4000(size=4096) memory:84400000-846fffff ioport:84700000(size=2097152) *-network description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d6:d2:35 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.13.0-29-generic firmware=15.32.2.9 ip=10.110.20.157 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:43 memory:84400000-84400fff *-pci:2 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:5000(size=4096) memory:84900000-84afffff ioport:84b00000(size=2097152) *-usb:0 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:1820(size=32) *-usb:1 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:1840(size=32) *-usb:2 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:1860(size=32) *-usb:3 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:1880(size=32) *-usb:4 description: USB controller product: NM10/ICH7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:d0544000-d05443ff *-pci:3 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list resources: ioport:2000(size=4096) memory:d0000000-d00fffff ioport:80000000(size=67108864) *-pcmcia description: CardBus bridge product: PCIxx12 Cardbus Controller vendor: Texas Instruments physical id: 4 bus info: pci@0000:0a:04.0 version: 00 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 resources: irq:17 memory:d0004000-d0004fff ioport:2400(size=256) ioport:2800(size=256) memory:80000000-83ffffff memory:88000000-8bffffff *-firewire description: FireWire (IEEE 1394) product: PCIxx12 OHCI Compliant IEEE 1394 Host Controller vendor: Texas Instruments physical id: 4.1 bus info: pci@0000:0a:04.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm ohci bus_master cap_list configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=3 resources: irq:17 memory:d0007000-d00077ff memory:d0000000-d0003fff *-storage description: Mass storage controller product: 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) vendor: Texas Instruments physical id: 4.2 bus info: pci@0000:0a:04.2 version: 00 width: 32 bits clock: 33MHz capabilities: storage pm bus_master cap_list configuration: driver=tifm_7xx1 latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0005000-d0005fff *-generic description: SD Host controller product: PCIxx12 SDA Standard Compliant SD Host Controller vendor: Texas Instruments physical id: 4.3 bus info: pci@0000:0a:04.3 version: 00 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0007800-d00078ff *-network description: Ethernet interface product: PRO/100 VE Network Connection vendor: Intel Corporation physical id: 8 bus info: pci@0000:0a:08.0 logical name: eth0 version: 02 serial: 00:16:36:80:e9:92 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s resources: irq:20 memory:d0006000-d0006fff ioport:2000(size=64) *-isa description: ISA bridge product: 82801GBM (ICH7-M) LPC Interface Bridge vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide description: IDE interface product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:18b0(size=16) *-serial UNCLAIMED description: SMBus product: NM10/ICH7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:18c0(size=32) *-scsi physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: ST9250421AS vendor: Seagate physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: SD13 serial: 5TH0B2HB size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000d7fd5 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 13bb4bdd-8cc9-40e2-a490-dbe436c2a02d size: 230GiB capacity: 230GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2014-06-01 17:37:01 filesystem=ext4 lastmountpoint=/ modified=2014-06-01 21:15:21 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2014-06-01 21:15:21 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 2037MiB capacity: 2037MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 2037MiB capabilities: nofs *-remoteaccess UNCLAIMED vendor: Intel physical id: 1 capabilities: inbound kyra@kyra-Satellite-P105:~$

  Read the article

• Kubuntu 12.04 - Touchpad and keyboard stopped working at random

  - by StepTNT

  As in the title, I've got this problem with my Kubuntu 12.04. At first I've thought that the whole system was hung, but it happened again 5 minutes ago and, while the keyboard and the touchpad stopped working, the music was still playing, so I guess that's just an "input" problem, because the system was still working! Any solution? Is there some data that you need to know about my setup? EDIT: Added my lshw outout description: Notebook product: N53SV () vendor: ASUSTeK Computer Inc. version: 1.0 serial: B2N0AS17695408A width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=N uuid=8083F2DA-A43E-E081-3F3F-BCAEC55F8AA1 *-core description: Motherboard product: N53SV vendor: ASUSTeK Computer Inc. physical id: 0 version: 1.0 serial: BSN12345678901234567 slot: MIDDLE *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: N53SV.214 date: 08/10/2011 size: 64KiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 800MHz capacity: 4GHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache description: L1 cache physical id: 5 slot: L1-Cache size: 32KiB capacity: 32KiB capabilities: internal write-back instruction *-memory description: System Memory physical id: 40 slot: System board or motherboard size: 10GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: 99U5428-040.A00LF vendor: Kingston physical id: 0 serial: 103C28C3 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 58383D1F slot: ChannelA-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 2 serial: 58183D19 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 3 serial: 58183C8F slot: ChannelB-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:d000(size=4096) memory:db000000-dc0fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:db000000-dbffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:d000(size=128) memory:dc000000-dc07ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:dc400000-dc7fffff memory:b0000000-bfffffff ioport:e000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:48 memory:df00b000-df00b00f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:df008000-df0083ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:49 memory:df000000-df003fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:c000(size=4096) memory:de600000-deffffff ioport:d4200000(size=10485760) *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:b000(size=4096) memory:ddc00000-de5fffff ioport:d3700000(size=10485760) *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 48:5d:60:f2:2c:fd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-24-generic firmware=N/A ip=192.168.1.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:ddc00000-ddc0ffff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:a000(size=4096) memory:dd200000-ddbfffff ioport:d2c00000(size=10485760) *-usb description: USB controller product: FL1000G USB 3.0 Host Controller vendor: Fresco Logic physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:dd200000-dd20ffff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:44 ioport:9000(size=4096) memory:dc800000-dd1fffff ioport:d2100000(size=10485760) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: bc:ae:c5:5f:8a:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:46 ioport:9000(size=256) memory:d2104000-d2104fff memory:d2100000-d2103fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:df007000-df0073ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:e0b0(size=8) ioport:e0a0(size=4) ioport:e090(size=8) ioport:e080(size=4) ioport:e060(size=32) memory:df006000-df0067ff *-disk description: ATA Disk product: ST9750420AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0002 serial: 5WS0A7QR size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=e0c5913d *-volume:0 description: Windows FAT volume vendor: MSDOS5.0 physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: FAT32 serial: 4ce5-3acb size: 3004MiB capacity: 3004MiB capabilities: primary fat initialized configuration: FATs=2 filesystem=fat *-volume:1 description: EXT4 volume vendor: Linux physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 logical name: / version: 1.0 serial: c198cc2a-d86a-4460-a4d5-3fc0b21e439c size: 28GiB capacity: 28GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-03-15 16:53:54 filesystem=ext4 lastmountpoint=/ modified=2012-05-02 18:52:04 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,acl,barrier=1,data=ordered mounted=2012-05-09 19:06:01 state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 4c1cdebc-ec09-2947-a3b5-c1f9f1cddc1c size: 152GiB capacity: 152GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-02-22 16:02:47 filesystem=ntfs label=OS state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 514GiB capacity: 514GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 10GiB capabilities: nofs *-logicalvolume:1 description: HPFS/NTFS partition physical id: 6 logical name: /dev/sda6 capacity: 504GiB *-cdrom description: DVD-RAM writer product: BD-MLT UJ240AS vendor: MATSHITA physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.00 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:df005000-df0050ff ioport:e040(size=32)

  Read the article

• Database file is inexplicably locked during SQLite commit

  - by sweeney

  Hello, I'm performing a large number of INSERTS to a SQLite database. I'm using just one thread. I batch the writes to improve performance and have a bit of security in case of a crash. Basically I cache up a bunch of data in memory and then when I deem appropriate, I loop over all of that data and perform the INSERTS. The code for this is shown below: public void Commit() { using (SQLiteConnection conn = new SQLiteConnection(this.connString)) { conn.Open(); using (SQLiteTransaction trans = conn.BeginTransaction()) { using (SQLiteCommand command = conn.CreateCommand()) { command.CommandText = "INSERT OR IGNORE INTO [MY_TABLE] (col1, col2) VALUES (?,?)"; command.Parameters.Add(this.col1Param); command.Parameters.Add(this.col2Param); foreach (Data o in this.dataTemp) { this.col1Param.Value = o.Col1Prop; this. col2Param.Value = o.Col2Prop; command.ExecuteNonQuery(); } } this.TryHandleCommit(trans); } conn.Close(); } } I now employ the following gimmick to get the thing to eventually work: private void TryHandleCommit(SQLiteTransaction trans) { try { trans.Commit(); } catch (Exception e) { Console.WriteLine("Trying again..."); this.TryHandleCommit(trans); } } I create my DB like so: public DataBase(String path) { //build connection string SQLiteConnectionStringBuilder connString = new SQLiteConnectionStringBuilder(); connString.DataSource = path; connString.Version = 3; connString.DefaultTimeout = 5; connString.JournalMode = SQLiteJournalModeEnum.Persist; connString.UseUTF16Encoding = true; using (connection = new SQLiteConnection(connString.ToString())) { //check for existence of db FileInfo f = new FileInfo(path); if (!f.Exists) //build new blank db { SQLiteConnection.CreateFile(path); connection.Open(); using (SQLiteTransaction trans = connection.BeginTransaction()) { using (SQLiteCommand command = connection.CreateCommand()) { command.CommandText = DataBase.CREATE_MATCHES; command.ExecuteNonQuery(); command.CommandText = DataBase.CREATE_STRING_DATA; command.ExecuteNonQuery(); //TODO add logging } trans.Commit(); } connection.Close(); } } } I then export the connection string and use it to obtain new connections in different parts of the program. At seemingly random intervals, though at far too great a rate to ignore or otherwise workaround this problem, I get unhandled SQLiteException: Database file is locked. This occurs when I attempt to commit the transaction. No errors seem to occur prior to then. This does not always happen. Sometimes the whole thing runs without a hitch. No reads are being performed on these files before the commits finish. I have the very latest SQLite binary. I'm compiling for .NET 2.0. I'm using VS 2008. The db is a local file. All of this activity is encapsulated within one thread / process. Virus protection is off (though I think that was only relevant if you were connecting over a network?). As per Scotsman's post I have implemented the following changes: Journal Mode set to Persist DB files stored in C:\Docs + Settings\ApplicationData via System.Windows.Forms.Application.AppData windows call No inner exception Witnessed on two distinct machines (albeit very similar hardware and software) Have been running Process Monitor - no extraneous processes are attaching themselves to the DB files - the problem is definitely in my code... Does anyone have any idea whats going on here? I know I just dropped a whole mess of code, but I've been trying to figure this out for way too long. My thanks to anyone who makes it to the end of this question! brian UPDATES: Thanks for the suggestions so far! I've implemented many of the suggested changes. I feel that we are getting closer to the answer...however... The code above technically works however it is non-deterministic! It is not guaranteed to do anything aside from spin in neutral forever. In practice it seems to work somewhere between the 1st and 10th iteration. If i batch my commits at a reasonable interval damage will be mitigated but I really do not want to leave things in this state... More suggestions welcome!

  Read the article

• W7 routing - traffic not going to default gateway

  - by Ian Macintosh

  I have a really strange Windows 7 IPv4 routing issue that I can't get to the bottom of. The summary of the issue is that the default gateway is set to 192.168.254.253, but that it is actually using a default gateway of 192.168.254.254. Here's a network diagram: .-,( ),-. .-( )-. .-----( internet )----.--------------------------. | '-( ).-' | | | '-.( ).-' | | v v v .------------. .------. .------. | 10mb Fibre | | ADSL | | ADSL | '------------' '------' '------' | | | | | | v v v .---------------------. .--------------------. .--------------------. | Juniper Box | | Draytek DSL Router | | Draytek DSL Router | |---------------------| |--------------------| |--------------------| | (public IP address) | | 172.16.0.x | | 172.16.0.x | '---------------------' '--------------------' '--------------------' | | | | | .-------------------' | v v v .-------------------------. .-----------------. | Draytek Dual WAN Router | | Untangle GW | |-------------------------| |-----------------| | 192.168.254.254 | | 192.168.254.253 | '-------------------------' '-----------------' | | | | | v v =================================== LAN =================================== | | | | v v .----------------. .----------------. | Windows 7 W/S | | Windows 7 W/S | |----------------| |----------------| | 192.168.254.38 | | 192.168.254.77 | '----------------' '----------------' This is a recently (a few weeks ago) converted fibre site with the original 2 DSL lines still attached and running. An Untangle (firewall) was installed with the fibre line. Here is the affected PC network configuration: C:\>ipconfig /allcompartments /all Windows IP Configuration ============================================================================== Network Information for Compartment 1 (ACTIVE) ============================================================================== Host Name . . . . . . . . . . . . : COMP36 Primary Dns Suffix . . . . . . . : XXXXXX.local Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : XXXXXX.local Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : XXXXXX.local Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : C8-9C-DC-33-F1-65 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::3925:86a5:7066:ab92%15(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.254.38(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 22 August 2012 10:20:32 Lease Expires . . . . . . . . . . : 30 August 2012 10:20:31 Default Gateway . . . . . . . . . : 192.168.254.253 DHCP Server . . . . . . . . . . . : 192.168.254.200 DHCPv6 IAID . . . . . . . . . . . : 315137244 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-4A-17-8D-10-78-D2-74-2F-8A DNS Servers . . . . . . . . . . . : 192.168.254.200 Primary WINS Server . . . . . . . : 192.168.254.200 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.XXXXXX.local: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : XXXXXX.local Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes The routing table: C:\>route print =========================================================================== Interface List 15...c8 9c dc 33 f1 65 ......Realtek PCIe GBE Family Controller #2 1...........................Software Loopback Interface 1 10...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.254.253 192.168.254.38 10 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.254.0 255.255.255.0 On-link 192.168.254.38 266 192.168.254.38 255.255.255.255 On-link 192.168.254.38 266 192.168.254.255 255.255.255.255 On-link 192.168.254.38 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.254.38 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.254.38 266 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 15 266 fe80::/64 On-link 15 266 fe80::3925:86a5:7066:ab92/128 On-link 1 306 ff00 ::/8 On-link 15 266 ff00::/8 On-link =========================================================================== Persistent Routes: None And the strange routing as demonstrated by tracert: C:\>tracert -d www.bbc.co.uk Tracing route to www.bbc.net.uk [212.58.246.95] over a maximum of 30 hops: 1 1 ms 1 ms <1 ms 192.168.254.254 2 1 ms 1 ms 1 ms 172.16.0.254 3 17 ms 18 ms 16 ms XXXXXXXXXXXXXXX 4 18 ms 19 ms 19 ms XXXXXXXXXXXXXXX 5 22 ms 22 ms 22 ms XXXXXXXXXXXXXXX 6 22 ms 21 ms 22 ms XXXXXXXXXXXXXXX 7 21 ms 21 ms 22 ms 217.41.169.109 8 30 ms 32 ms 57 ms 109.159.251.227 9 46 ms 39 ms 35 ms 109.159.251.137 10 27 ms 66 ms 30 ms 109.159.254.116 ^C However, when done from another Windows 7 workstation: C:\Users\administrator>ipconfig /allcompartments /all Windows IP Configuration ============================================================================== Network Information for Compartment 1 (ACTIVE) ============================================================================== Host Name . . . . . . . . . . . . : PABX-BACKUP Primary Dns Suffix . . . . . . . : XXXXXX.local Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : XXXXXX.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : XXXXXX.local Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 8C-89-A5-94-43-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9479:1c11:6f9f:ae0b%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.254.77(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 15 August 2012 08:27:18 Lease Expires . . . . . . . . . . : 27 August 2012 08:27:31 Default Gateway . . . . . . . . . : 192.168.254.253 DHCP Server . . . . . . . . . . . : 192.168.254.200 DHCPv6 IAID . . . . . . . . . . . : 244091301 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-C2-79-BE-8C-89-A5-94-43-84 DNS Servers . . . . . . . . . . . : 192.168.254.200 Primary WINS Server . . . . . . . : 192.168.254.200 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.XXXXXX.local: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : XXXXXX.local Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft 6to4 Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes C:\Users\administrator> And finally, doing a tracert from the 2nd workstation yields expected results: C:\Users\administrator>tracert -d www.bbc.co.uk Tracing route to www.bbc.net.uk [212.58.244.67] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.254.253 2 1 ms 1 ms 1 ms 141.0.xxx.xxx 3 2 ms 2 ms 2 ms 141.0.xxx.xxx 4 7 ms 2 ms 2 ms 109.204.xxx.xxx 5 2 ms 2 ms 2 ms 95.177.0.7 6 3 ms 2 ms 2 ms 95.177.0.9 7 30 ms 2 ms 2 ms 95.177.0.2 8 2 ms 2 ms 2 ms 195.66.224.103 9 ^C As expected, it is routing via .253, and the 2nd hop is the inside interface of the Juniper NTU. I've not inspected the traffic yet. In particular, I was going to look for ICMP redirects, though why there would be an ICMP redirect at all is not really sensible? .254 used to be the default gateway before the fibre was installed. Any ideas? Doesn't make sense to me why there should be this routing issue :( The Draytek Dual WAN Router was rebooted, the PC was rebooted. The PC had the network disabled and then re-enabled. All the standard stuff when Windows looses the plot. Hopefully somebody recognises the symptoms! PS: Sorry for the long post, but I didn't want to leave something potentially relevant out. PPS: No iSCSI involved on/at this or any other workstation so Windows 7 routing traffic through the gateway for local addresses isn't the issue.

  Read the article

• Prevent RDP logon brute force in mikrotik router via winbox

  - by holian

  Masters, I need help, how to config our router to block RDP brute force attacks I would like to set our router to only allow RDP connection from a specified country (our specified IP ranges), plus i need to set up router to block (take ips to black list) and drop brute force attepmst to specified port numbers. I try to set this with changeing the ftp port to rdp port. http://wiki.mikrotik.com/wiki/Bruteforce_login_prevention_%28FTP_%26_SSH Any suggestion tnx. H Current configuration: I try to configure the router via Winbox. I set some NAT rules (from dyndns to local address, rdp port) In the filter rules tab: I'm not sure this configuration should do the trick?! Is the content text "530 login incorrect" is fit for RDP connection to? Because in the tutorial used for filtering FTP connection. How to set router to allow RDP attempts from specified IP ranges? Thank you // New config

  Read the article

• Testing radius server from Mac OS X client

  - by Calvin Froedge

  I have a radius server set up on a server running Ubuntu 11.04. I have configured my switch to use the authentication server's IP (192.168.1.2) for RADIUS / 802.1x authentication, and I created a connection to test connecting from my Mac OSX client. Here is my radius configuration for the client: client 192.168.1.0/16 { secret = testing123 } I can successfully authenticate using both 127.0.0.1 (localhost) and 192.168.1.2 (ip of eth1), so I know radius is getting those requests. I set up a connection to test from my macbook, and my requests are timing out. http://screencast.com/t/tMhRLS3H7 Is there a better way to test the radius connection from my macbook? Thanks! UPDATE: I was able to successfully test on Mac OSX client using RadPerf. This is available as a cross-platform command line tool.

  Read the article

• Can't get the L2TP IPSEC up and running

  - by Maciej Swic

  i have an Ubuntu 11.10 (oneiric) server running on a ReadyNAS. Im planning to use this to accept ipsec+l2tp connections through a router. However, the connection is failing somewhere half through. Using Openswan IPsec U2.6.28/K3.0.0-12-generic and trying to connect with an iOS 5 iPhone 4S. This is how far i can get: auth.log: Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "PSK" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-NAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-noNAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "passthrough-for-non-l2tp" Jan 19 13:54:11 ubuntu pluto[1990]: listening for IKE messages Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying new style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying old style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo ::1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 2001:470:28:81:a00:27ff:* Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/etc/ipsec.secrets" Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/var/lib/openswan/ipsec.secrets.inc" Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [RFC 3947] method set to=109 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] method set to=110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [8f8d83826d246b6fc7a8a6a428c11de8] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [4d1e0e136deafa34c4f3ea9f02ec7285] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [80d0bb3def54565ee84645d4c85ce3ee] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [9909b64eed937c6573de52ace952fa6b] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [Dead Peer Detection] Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: responding to Main Mode from unknown peer 95.*.*.233 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R1: sent MR1, expecting MI2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R2: sent MR2, expecting MI3 Jan 19 14:05:03 ubuntu pluto[1990]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 95.*.*.233 port 500, complainant 95.*.*.233: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Router config UDP 500, 1701 and 4500 forwarded to 192.168.19.99 (Ubuntu server for ipsec). Ipsec passthrough enabled. /etc/ipsec.conf # /etc/ipsec.conf - Openswan IPsec configuration file # This file: /usr/share/doc/openswan/ipsec.conf-sample # # Manual: ipsec.conf.5 version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes #charonstart=yes #plutostart=yes protostack=netkey conn PSK authby=secret forceencaps=yes pfs=no auto=add keyingtries=3 dpdtimeout=60 dpdaction=clear rekey=no left=192.168.19.99 leftnexthop=192.168.19.1 leftprotoport=17/1701 right=%any rightprotoport=17/%any rightsubnet=vhost:%priv,%no dpddelay=10 #dpdtimeout=10 #dpdaction=clear include /etc/ipsec.d/l2tp-psk.conf /etc/ipsec.d/l2tp-psk.conf conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT # # PreSharedSecret needs to be specified in /etc/ipsec.secrets as # YourIPAddress %any: "sharedsecret" authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=192.168.19.99 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "0" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port, but propose "0" instead of their port. rightprotoport=17/%any dpddelay=10 dpdtimeout=10 dpdaction=clear conn passthrough-for-non-l2tp type=passthrough left=192.168.19.99 leftnexthop=192.168.19.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/ipsec.secrets include /var/lib/openswan/ipsec.secrets.inc %any %any: PSK "my-key" 192.168.19.99 %any: PSK "my-key" /etc/xl2tpd/xl2tpd.conf [global] debug network = yes debug tunnel = yes ipsec saref = no listen-addr = 192.168.19.99 [lns default] ip range = 192.168.19.201-192.168.19.220 local ip = 192.168.19.99 require chap = yes refuse chap = no refuse pap = no require authentication = no ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd pcp-accept-local ipcp-accept-remote noccp auth crtscts idle 1800 mtu 1410 mru 1410 defaultroute debug lock proxyarp connect-delay 5000 ipcp-accept-local /etc/ppp/chap-secrets # Secrets for authentication using CHAP # client server secret IP addresses maciekish * my-secret * * maciekish my-secret * I can't seem to find the problem. Other ipsec connections to other hosts work from the network im currently at.

  Read the article

• Reusable VS clean code - where's the balance?

  - by Radek Šimko

  Let's say I have a data model for a blog posts and have two use-cases of that model - getting all blogposts and getting only blogposts which were written by specific author. There are basically two ways how I can realize that. 1st model class Articles { public function getPosts() { return $this->connection->find() ->sort(array('creation_time' => -1)); } public function getPostsByAuthor( $authorUid ) { return $this->connection->find(array('author_uid' => $authorUid)) ->sort(array('creation_time' => -1)); } } 1st usage (presenter/controller) if ( $GET['author_uid'] ) { $posts = $articles->getPostsByAuthor($GET['author_uid']); } else { $posts = $articles->getPosts(); } 2nd one class Articles { public function getPosts( $authorUid = NULL ) { $query = array(); if( $authorUid !== NULL ) { $query = array('author_uid' => $authorUid); } return $this->connection->find($query) ->sort(array('creation_time' => -1)); } } 2nd usage (presenter/controller) $posts = $articles->getPosts( $_GET['author_uid'] ); To sum up (dis)advantages: 1) cleaner code 2) more reusable code Which one do you think is better and why? Is there any kind of compromise between those two?

  Read the article

• Stable reverse port forwarding in SSH and stale sessions

  - by Vi

  Using VPS to forward ports behind NAT: for((;;)) { ssh -R 2222:127.0.0.1:22 [email protected]; sleep 10; } When connection is broken somehow and it is reconnecting. Warning: remote port forwarding failed for listen port 2222 Linux vi-server.no-ip.org 2.6.18-92.1.13.el5.028stab059.3 #1 SMP Wed Oct 15 13:33:44 MSD 2008 i686 I type: vi@vi-server:~$ killall sshd Connection to vi-server.org closed by remote host. Connection to vi-server.org closed. Linux vi-server.no-ip.org 2.6.18-92.1.13.el5.028stab059.3 #1 SMP Wed Oct 15 13:33:44 MSD 2008 i686 vi@vi-server:~$ Now it's OK. How it's simpler to make this automatic?

  Read the article

• How do I get this Cisco VPN client to connect?

  - by WebWeasel

  I've got Ubuntu 10.10 64 bit and installed network-manager-vpnc and configured the connection but I keep getting this: NetworkManager[1217]: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4420 NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' appeared, activating connections NetworkManager[1217]: <info> VPN plugin state changed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 3 NetworkManager[1217]: <info> VPN connection 'CSI' (Connect) reply received. modem-manager: (net/tun0): could not get port's parent device NetworkManager[1217]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/tun0, iface: tun0) NetworkManager[1217]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/tun0, iface: tun0): no ifupdown configuration found. kernel: [ 2281.723506] tun0: Disabled Privacy Extensions avahi-daemon[1109]: Withdrawing workstation service for tun0. NetworkManager[1217]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/tun0, iface: tun0) NetworkManager[1217]: <warn> VPN plugin failed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 6 NetworkManager[1217]: <info> VPN plugin state change reason: 0 NetworkManager[1217]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. NetworkManager[1217]: <info> Policy set 'Auto eth0' (eth0) as default for IPv4 routing and DNS. NetworkManager[1217]: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4547 NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' appeared, activating connections NetworkManager[1217]: <info> VPN plugin state changed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 3 I've seen a couple of bugs on Launchpad that could be the same thing or have I done something wrong?

  Read the article

• Kill your temp tables using keyboard shortcuts : SSMS

  - by jamiet

  Here’s a nifty little SSMS trick that my colleague Tom Hunter educated me on the other day and I thought it was worth sharing. If you’re a keyboard shortcut junkie then you’ll love it. How often when working with code in SSMS that contains temp tables do you see the following message: Msg 2714, Level 16, State 6, Line 78 There is already an object named '#table' in the database. Quite often I would imagine, it happens to me all the time! Usually I write a bit of code at the top of the query window that goes and drops the table if it exists but there’s a much easier way of dealing with it. Remember that temp tables disappear as soon as your sessions ends hence wouldn’t it be nice if there were a quick way of recycling (i.e. stopping and restarting) your session? Well turns out there is and all it takes is a sequence of 4 keystrokes: Bring up the context menu using that mythically-named button that usually sits 3 to the right of the space bar ‘C’ for “Connection” ‘H’ for “Change Connection…” ‘Enter’ to select the same connection you had open last time (screenshots below) Once you’ve done it a few times you’ll probably have the whole sequence down to less than a second. Such a simple little trick, I’m annoyed with myself for it not occurring to me before! The only caveat is that you’ll need a “USE <database>” directive at the top of your query window but I don’t think that’s much of a bind! That is all other than to say if you like little SSMS titbits like this then Lee Everest’s blog is a good one to keep an eye on! @jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• OBIEE 11.1.1 - Disable Wrap Data Types in WebLogic Server 10.3.x

  - by Ahmed Awan

  By default, JDBC data type’s objects are wrapped with a WebLogic wrapper. This allows for features like debugging output and track connection usage to be done by the server. The wrapping can be turned off by setting this value to false. This improves performance, in some cases significantly, and allows for the application to use the native driver objects directly. Tip: How to Disable Wrapping in WLS Administration Console You can use the Administration Console to disable data type wrapping for following JDBC data sources in bifoundation_domain domain: Data Source Name bip_datasource mds-owsm EPMSystemRegistry   To disable wrapping for each JDBC data source (as stated in above table): 1.     If you have not already done so, in the Change Center of the Administration Console, click Lock & Edit. 2.     In the Domain Structure tree, expand Services, then select Data Sources. 3.     On the Summary of Data Sources page, click the data source name for example “mds-owsm”. 4.     Select the Configuration: Connection Pool tab. 5.     Scroll down and click Advanced to show the advanced connection pool options. 6.     In Wrap Data Types, deselect the checkbox to disable wrapping. 7.     Click Save. 8.     To activate these changes, in the Change Center of the Administration Console, click Activate Changes. Important Note: This change does not take effect immediately—it requires the server be restarted.

  Read the article

• Access FTPS from behind Forefront TMG

  - by Maxim V. Pavlov

  I have a web server on which IIS 7 host an SSL-enabled site. The client in am trying to connect with is behind the corporate Forefront TMG. The app is Total Commander - a file manager shell, that has the ability to connect to SSL FTP by putting a checkmark over SSL/TLS in the FTP connection settings. When FTP Access Filter in FF is enabled, my connection attempt fails on Negociating TLS step of FTP connection. The same happens even if I enable Allow Active FTP in the filter's settings. But when I disable the FTP Access Filter on FF completely, I am able to connect fine. How to configure FF TMG to allow FTPS?

  Read the article

• VPN with wrong subnet mask

  - by Philipp Schmid

  I followed these instructions on www.hottonetworking.com to set up VPN on a clean install of Windows Server 2008 SP2 (not R2 yet). When I then establish a VPN connection to that machine from a client machine (running Windows 7 RC), everything succeeds (it seems since I get a 'Connected' state in the network sharing center window), but I end up with a subnet mask (according to ipconfig /all) of 255.255.255.255 instead of 255.255.255.0. The net effect is that I don't have local network or internet capability. What additional configuration steps do I have to do to get VPN with the proper subnet mask working? Update: Using the steps outlined in the Technet article mentioned by Mr. Nimble, I was able to get internet connection. Apparently the subnet mask is not an issue as my coworker was able to connect using his VPN connection and ping the server machine by name as well.

  Read the article

• Oracle SQL Developer version 3.2.2 Released

  - by thatjeffsmith

  This is another maintenance release, but I don’t want to minimize the work done in either the 3.2.1 or the 3.2.2 editions. The two releases include more than 400 bug fixes. Version 3.2 should be rocking and rolling and good to go while we work on the next major release! You can find the downloads and bug fixes in the normal places: Download 3.2.2 Bug fixes Connection Names If you downloaded and used version 3.2.1 and noticed some of your connection names were no longer valid due to ‘special’ characters, we’ve loosed our restrictions a bit for 3.2.2. You can now go back to using spaces and hyphens in your connection names. periods, spaces, hyphens should now all work More Copy & Paste Stuff While fixing a bug, the developer decided to also enhance the feature while he was in the code. I love seeing this happen organically. No one is sitting over their shoulder with the red magic marker. No, I’m too far away to do that except on very special days So here’s a ‘trick’ – if you want to copy cells from your grids, just drag the selected cells to the worksheet/editor. You’ll get a comma delimited list – very handy! Select cells, drag and drop up to the worksheet – Voila! Comma separated values

  Read the article

• IPSec VPN's being dropped by router and will not re-establish

  - by David Gard

  We have 3 sites, with our two remote sites connection to head office via LAN-to-LAN VPN's. All 3 sites use DrayTek 2900's with firware version v3.3.1.1_RC2 (this is a release candidate that DrayTek suggested I try, but sadly it made no difference). The only way to re-establish the VPN's once they have been dropped is to restart the router. Head office is set to dial out to both sites, with both the 'Always on' and 'Enable PING to keep alive' (pinging a server in the remote offices) options ticked. However, at random intervals the VPN's drop, logging IKE_RELEASE VPN : Dial-out Profile Index = 7, Name = Shepton (for one connection, and '6' & 'Wincanton' for the other connection). I first tried swapping the router with one at another site, and then had all three replaced, but that failed to solve the problem. Is anyone aware of anything that could cause the VPN's to drop randomly like this? Thanks.

  Read the article

• IPv6 address is not working in Ubuntu

  - by Alex Farber

  Telnet connection with echo service succeeds for localhost and 127.0.0.1 host names, but fails with ::1 host name: alex@u120432:~$ telnet localhost 7 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 123 123 ^] telnet q Connection closed. alex@u120432:~$ telnet ::1 7 Trying ::1... telnet: Unable to connect to remote host: Connection refused alex@u120432:~$ My own program trying to talk using IPv6 address fails as well. Why IPv6 address is rejected? OS: Ubuntu 12.04 32 bit.

  Read the article

• Exim mail server slow on sending through SMTP

  - by catalint

  It takes about 30 seconds for the server to send me the banner, but initial connection is done instantly only happens when I am at the office, from home it works fine at the office I have a rRns set-up for my client ip that it's not working. Server: Exim, public fixed ip, rDNS, no ports blocked, in a datacenter Config: hostlist loopback = <; 127.0.0.0/8 ; 0.0.0.0 ; ::1 ; 0000:0000:0000:0000:0000:ffff:7f00:0000/8 hostlist senderverifybypass_hosts = net-iplsearch;/etc/senderverifybypasshosts hostlist skipsmtpcheck_hosts = net-iplsearch;/etc/skipsmtpcheckhosts hostlist spammeripblocks = net-iplsearch;/etc/spammeripblocks hostlist backupmx_hosts = lsearch;/etc/backupmxhosts hostlist trustedmailhosts = lsearch;/etc/trustedmailhosts domainlist user_domains = ${if exists{/etc/userdomains} {lsearch;/etc/userdomains} fail} This happens super fast on the server: 30132 ident connection to 89.238.207.49 failed: Connection refused 30132 sender_fullhost = [89.238.207.49] 30132 sender_rcvhost = [89.238.207.49] 30132 Process 30132 is handling incoming connection from [89.238.207.49] 30132 host in host_lookup? no (option unset) 30132 set_process_info: 30132 handling incoming connection from [89.238.207.49] 30132 host in host_reject_connection? no (option unset) 30132 host in sender_unqualified_hosts? no (option unset) 30132 host in recipient_unqualified_hosts? no (option unset) 30132 host in helo_verify_hosts? no (option unset) 30132 host in helo_try_verify_hosts? no (option unset) 30132 host in helo_accept_junk_hosts? yes (matched "*") 30132 using ACL "acl_connect" 30132 processing "accept" 30132 check hosts = +trustedmailhosts 30132 sender host name required, to match against lsearch;/etc/trustedmailhosts 30132 looking up host name for 89.238.207.49 30132 IP address lookup yielded relay.easycomm.ro Client side 2011.09.14 13:08:13 SMTP (mail.server.ro): Begin execution 2011.09.14 13:08:13 SMTP (mail.server.ro): Port: 465, Secure: SSL, SPA: no 2011.09.14 13:08:13 SMTP (mail.server.ro): Finding host 2011.09.14 13:08:13 SMTP (mail.server.ro): Connecting to host 2011.09.14 13:08:13 SMTP (mail.server.ro): Securing connection 2011.09.14 13:08:13 SMTP (mail.server.ro): Connected to host ---> This is a 1 minute 5 seconds gap 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 220-genius.filipnet.ro ESMTP Exim 4.69 #1 Wed, 14 Sep 2011 13:09:26 +0300 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 220-We do not authorize the use of this system to transport unsolicited, 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 220 and/or bulk e-mail. 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] EHLO CatalinDell 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-genius.filipnet.ro Hello CatalinDell [89.238.207.49] 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-SIZE 52428800 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-PIPELINING 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-AUTH PLAIN LOGIN 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250 HELP 2011.09.14 13:09:18 SMTP (mail.server.ro): Authorizing to server 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] AUTH LOGIN 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 334 VXNlcm5hbWU6 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] dGVzdEBzcG9ydGd1cnUucm8= 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 334 UGFzc3dvcmQ6 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] ***** 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 235 Authentication succeeded 2011.09.14 13:09:18 SMTP (mail.server.ro): Authorized to host 2011.09.14 13:09:18 SMTP (mail.server.ro): Connected to host 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] MAIL FROM: <*****> 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250 OK 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] RCPT TO: <*****> 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250 Accepted 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] DATA 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 354 Enter message, ending with "." on a line by itself 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] . ---> This is a 1 minute 10 seconds gap 2011.09.14 13:10:28 SMTP (mail.server.ro): <rx> 250 OK id=1R3mPG-0004T4-7Q 2011.09.14 13:10:28 SMTP (mail.server.ro): End execution --- Initial info I've setup an email account on "Windows Live Mail" that comes with Windows 7 Receiving is super fast, but for some reason sending is very slow, I had to increase the outgoing timeout to 3 minutes in order to make it work. Server software is Exim / Dovecot / cPanel. Do you have any ideeas why there is a slow sending process? Thank you!

  Read the article

• Dual Nic, one keeps dropping

  - by user1215018

  I'm running windows server 2008 r2 on a dell poweredge 2850. I have 2 NICs, one is configured behind a firewall with a dhcp server on the main local LAN and another one has it's own dedicated connection to one of our 13 static IPs. So in a nutshell we have 2 of our static IPs going to this server, one indirectly through a firewall/dhcp server, and the other directly. I am trying to reach IIS on port 80 and port 443. The problem is that the NIC with the direct connection (NIC2) keeps dropping and says either "No internet connection" or "Unauthenticated". However, the NIC behind the firewall (NIC1) has no problems at all. Update: This is the second time this has happened in 3 days and each time the fix has been enabling the dhcp client on the NIC, allowing it to error out to a 169.x.x.x address, then re-enabling the nic with it's static IP assignment.

  Read the article

• Sync custom AD properties to SharePoint Profile

  - by KunaalKapoor

  Here are some step-by-step instructions regarding configuring SharePoint to sync with custom AD attributes:Add the custom attribute in Active DirectoryThis part will have to be your doing; here is some documentation regarding creating customattributes in AD:http://msdn.microsoft.com/en-us/library/ms675085(VS.85).aspxhttp://technet.microsoft.com/en-us/magazine/2008.05.schema.aspxhttp://blogs.technet.com/b/isingh/archive/2007/02/18/adding-custom-attributes-in-active-directory.aspx2. Open up the miisclient.exe (C:\Program Files\Microsoft Office Servers\14.0\Synchronization Service\UIShell\miisclient.exe)a. This will have to be opened up with the farm admin account3. Click on "Management Agents" in the ribbon4. Right-click the Active Directory Management Agent ("MOSS-<name of sync connection>") and click "Refresh Schema"a. When prompted, enter the credentials for the farm account5. Once complete, close out of miisclient.exe6. Go into Central Admin --> Application Management --> Manage Service Applications --> Go into the User Profile Service Application7. Click on "Manage User Properties"8. Click on "New Property"9. Put in the correct information regarding the attribute that was created10. At the bottom of this page, under the "Source Data Connection" drop down, select the AD synchronization connection you have already configured11. For the "Attribute" drop down, select the new attribute you have created12. For the "Direction" drop down, select "Import"13. Click "OK"14. Run a full synchronization for the user profile service application and the custom property will get synced (as long as the attribute is set in Active Directory for the desired users)

  Read the article

• Stop Cisco AnyConnect from locking down the NIC

  - by Johannes Rössel

  Cisco's VPN crapclients (including the AnyConnect one) have the nasty habit of clobbering all NICs on the system you're using them. The old client had a checkbox in the connection options that allowed you to use other network interfaces while being connected while the AnyConnect client doesn't have any options at all, seemingly. But they both lock down the network interface they are using to connect to the VPN. Since I am forced to use AnyConnect to actually have an internet connection and I like to control a second computer at home via RDP (over the same network interface so far) this doesn't quite work out. With the old client IPv6 still worked just fine, though AnyConnect seems to dislike that as well now. Is there any way to still use the same network interface for LAN access? I actually don't really care about any possible security implications (which might be why Cisco does this) as it's my freaking internet connection and not a secure way of working from home. The trade-off is quite different :-)

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >