Search Results

Search found 25718 results on 1029 pages for 'external hard drive'.

Page 262/1029 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

• Issues with creating USB bootable Mountain Lion

  - by Sidd

  I am trying to set up a triple boot Windows 8, Mountain Lion, and Ubuntu. I am stuck though. I have got Windows 8 on a partition, and I am trying to get Mountain Lion on there at this point. I installed a VMware with a Snow Leopard 10.6.2 image on the Windows 8 platform. I used the disk utility in this program in order to get Mountain Lion on there. This is what i did specifically: I got the installesd.dmg. I 'mounted' that file or whatever you call it, and out came something along the lines of "Install Mountain Lion OS x" (something like that - it was like a submenu under the installesd.dmg in the disk utility). I got my PNY 8 gb Attache Flash Drive and went to the Erase tab of disk utility. I erased it using the Mac OS Extended (Journaled) setting and called it "Mac". I went to the Restore tab, dragged "Mac" into destination, and dragged "Install Mountain Lion OS x" to the source. Everything seemed to go well, but it didn't. When trying to boot from the flash drive (and yes, I set the BIOS correctly), it skipped it, and loaded Windows 8 normally as if nothing was plugged in. When I try looking at the flash drive in windows 8, it comes up as a 200 mb capacity drive labeled "EFI" with nothing in it (remember, it was 8gb in the beginning). I downloaded Plop Boot Manager, but it did not recognize a USB being plugged in. Does anyone know how I could fix this?

  Read the article

• VMware vSphere Hypervisor 5 with Intel SPL 5000 in Raid 0 no boot from DVD?

  - by Richard

  I hope this is the correct StackExchange, since I am only using StackOverflow for Web development, but need some help with my server configuration. I would like to install VMware vSphere Hypervisor 5 on my server here at home and run a view machines on it such as Windows Server 2008 and Red Hat. I used to have either OpenSuse or Windows Server 2008 installed but I would like to get into VMWare Hypervisor. My hardware configuration: - Intel S5000PSL with bios version S5000.86B.10.60.0091 build date 10/09/2008 as of read out of bios - E5420 @ 2.5GHz Intel Xeon CPU The Intel Virtualization Technology is enabled in the BIOS - DVD DH20A4P DVD Writer - 8GB ECC Ram I have configured a RAID 0 on my 2 WD 2TB SATA drives I have burned the Hypervisor 5 on an empty DVD and it is bootable, I tested it on my client PC. The main problem here is basically, that I cannot boot the DVD on my server. I have set the Boot Option to the DVD drive. I have booted from the BIOS straight in the DVD drive and it does not work. I do not see any error messages. The only thing I see are the PXE error messages when it tries booting from the network and other devices, obviously without any result. Does anybody know why I cannot boot the DVD? What could cause the problem? I have sucessfully installed Windows Server 2008 via original DVD about 1 year ago, so the DVD drive can read and does work. The DVD drive is available in the BIOS and I have checked all cables and none of them is loose in any way. I even see the light flashing but it does not want to boot from the DVD. I am looking forward to suggestions and things that I should check. Thank you very much

  Read the article

• New Computer freezing up at random

  - by Benjamin Frost

  Since I built my system about 4 weeks ago I'v been getting random freezes, Sometimes it can happen directly after startup and sometimes it wont freeze up for 3-4 days of 24/7 running. It seems to be happening under all stress loads but mainly when the CPU is under 10% load. It doesn't give me a BSOD or anything, it simply just freezes and repeats the last sound before the freeze until I shut it down by the power button. I'v re-seated everything in the system except the CPU, Cleaned the RAM sockets and gold fittings. None of the components have been clocked above their factory settings as of yet, don't want to overclock them until I sort out these freezes. Temps are all well under the rated max temps, the highest the temps have been are below CPU: Low load: 16-21°C Full Load (100%) 40-43°C *(From HWMonitor by CPUID) GPU 1: Low Load: 25-30°C Full Load (100%): 45-50°C GPU 2: Low Load: 23-27°C Full Load (100%): 45-50°C *(GPU Temps from Catalyst Control Center) General Case temps Rear: 18-20°C Mid: 20-21°C Front (HDD/SSD Bays): 14-19°C (Case temps may be a little off as it's from the Kaze master pro fan controller) I have Un-installed EVERY driver for Motherboard, GPU & Soundcard and Re-installed twice. Windows is all up to date. To date i'v tried the following Running Memtest for 24 hrs straight, No errors Running Memtest on each individual RAM modules, No errors Reseated everything except the CPU Cleaned DIMM Sockets and Gold inputs Tested the Graphics cards 1 at a time Re-arranged all the SATA devices to run on Chipset controlled ports Re-installing all drivers OS: Win7 Professional 64bit Motherboard: ASRock X79 Extreme9 CPU: i7 3930k 3.2GHz GPU: Sapphire 7950 OC Edition V2 (2 card Crossfire) RAM: G.Skill Ripjaws Z F3-17000CL11Q-16GBZL 16GB (4x4GB) DDR3 Boot Drive: OCZ Agility 4 128GB Data Drive 1: Western Digital Black 2TB Data Drive 2: Western Digital Black 2TB Data Drive 3: Western Digital Green 3TB Power Supply: Corsair AX1200 Gold

  Read the article

• Migrating Windows XP BOOT.INI Settings to Windows 7 Boot-loader

  - by Synetech inc.

  Hi, Two months ago my motherboard died, so I bought a used computer that came with Windows 7. I have since installed my old hard-drive, which had Windows XP on it, in this system. What I am trying to do now is to figure out a way to migrate the settings from XP's BOOT.INI into 7's boot-loader. Below is the BOOT.INI I used in XP (I have reduced the strings and updated the disks to point to the new location of the old HD. Oh and I am not clear on the drive letters. In XP, I could boot the recovery console or MS-DOS from a file in C:\ that contains the boot-sector. I am not sure what drive letter it would be called now—I had to manually change all the drive letters of the old partitions in Windows 7 because it auto-assigned them all wrong/differently). [boot loader] timeout=10 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP (Safe)" /safeboot:network /sos /bootlog /noguiboot C:\CMDCONS\BOOTSECT.DAT="Recovery Console" /cmdcons C:\BOOTSECT.DOS="MS-DOS 7.10" /win95 I have looked around, and have only been able to find some bcdedit commands to add XP to the boot-loader, but none that include information on setting safe-mode for it (or changing any of the XP load options for that matter). Not surprisingly I suppose, I have not found anything on adding the XP recovery console or DOS to the Windows 7 boot-loader. (Yes, I tried EasyBCD, but that did not help; it had no options for XP, and the best I managed was to get a choice of booting 7 or normal-mode XP—choosing XP didn't even give the old XP boot menu.) Can anyone please tell me how to export the entries in XP's boot.ini to 7's boot-loader so that on boot, I can choose to load the following: Windows 7 Windows 7 (Safe-mode) (Windows 7 (The Win7 counterpart of the Recovery Console)) Windows XP Windows XP (Safe-mode) Windows XP (Recovery Console) MS-DOS 7.10

  Read the article

• How do I resolve BSOD: PAGE_FAULT_IN_NONPAGED_AREA?

  - by Burnzy

  I have been trouble shooting this for a few days and cannot fix this anyhow. Computer specifications Mobo: ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard CPU: Intel(R) Core(TM) i7 CPU 920 (Bloomfield) @ 2.67 ( no OC ) RAM: 6144MB RAM GPU: 2x NVIDIA GeForce GTS 250 1Go in SLI (sli is not enabled anyway at the moment anyway) Drives: OCZ RevoDrive OCZSSDPX-1RVD0120 PCI-E x4 120GB PCI Express MLC Internal SSD [RAID-0]. (I know this could potentilly cause trouble but I had the BSOD before using this drive) Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive Click here for a log of a crash I just had. Click here for a log of a crash I had 30 minutes later, note that it's another driver. Some info Occurence: It seems pretty random so far, haven't noticed any kind of pattern I tried: Windows memory diagnostic (went smoothly at 1066mhz) As I said, it was still happening on my HDD, so when I bought the revodrive I install a new OS on there and still got the error, I believed it happened and I had no drivers installed at that point (not 100% sure) Change the following registry value to 1 (true): HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager \MemoryManagement\ClearPageFileAtShutdown Tried to lower even more ram clock Made sure ram timing was set to recommended by manufacturer Verified if motherboard was in good physical condition (yes and its brand new) There is one thing to note, when I got the new motherboard, I installed the new drivers WITHOUT formatting and the I removed the motherboard drivers that I could remove from the control panel (pretty much the first things that have been installed). Could this cause an issue even ON THE OTHER drive (revodrive). Hopefully someone can help me, I am getting tired of this, spending so much money and cannot get this to work correctly. If you need any other information let me know, thank you!

  Read the article

• Where is my free space?

  - by Andrey

  A week ago I got a low disk space warning on my Vista x64 Ultimate box - 60 Mb free on the disk C; I cleaned up some downloaded msdn images and got 20 Gb freed up. Three days ago I got another notification, it looked suspicious but I didnt have time to deal with it and just moved some heavy stuff to another drive to free up about 17 Gb.... Today morning - 53Mb left on drive C, again! Now it looks really suspecious, so I downloaded TreeSize to see what's taking up the space, just to see it reporting only 121 GB out of 200 GB used, in other words I suppose to have about 79 Gb free. Then I went to Folder Options, enabled viewing of system and hidden files, rerun teh tool to see another 5 Gb added (which is expected). Then I open disk C in windows explorer, select all and right click Properties, to see it reporting teh same amount of files - 126 Gb. But when I look at Drive C properties, it reports that 200GB of 200 Gb are taken. I just scanned the drive with two different antiviruses - Symantec and AVG and found no viruses... I'm a little confused at this point, any ideas where is my free space, woudl be highly appreciated! Thank you! Andrey

  Read the article

• hdparm - how to secure erase SATA SSD over USB

  - by cc0

  I have been following this guide on how to secure erase an SSD (trying to improve the performance of mine, which currently only writes at about 30mb/s seq). However, I'm using an USB--Sata docking device to avoid having the harddrive frozen. Apparently using this solution the SATA device is recognized as a SCSI drive, which is giving me trouble. I use the "hdparm -I /dev/sda" command with those parameters, and I get the error; HDIO_DRIVE_CMD (identify) failed: Invalid Exchange After a lot of googling on the issue I can't seem to find anyone who has actually solved this problem. However, I have not tried to just go ahead and use the secure erase. So I'm not sure if this would actually still work. I would love any and all input I can get on this, especially on whether it will still work to do a secure erase with the drive being recognized as a SCSI drive. The drive itself is a Samsung 256gb SSD (pm800), I'm sure you can understand my reluctance to go through this procedure without feeling reasonably safe that I won't mess it up beyond repair.

  Read the article

• How to check DVD region settings in Window 7

  - by jmatthias

  I have installed Windows 7 on my laptop. When I put a movie in the DVD drive, the video player starts up and tells me 'THIS DISC IS NOT FORMATTED TO PLAY IN THIS REGION'. I have changed the DVD region a few times in the past but while I was in Windows XP I changed the region in Region 1. I cannot find how to check the DVD region setting in Windows 7 (it's not located on the hard properties page of the DVD anymore. Does anybody know how to check the DVD region in Windows 7? Update: If I connect an external USB DVD drive I can see the DVD region tab on the hardware properties dialog. I guess there is some compatibility problem with my internal DVD drive and Windows 7 (as I said I was able to inspect/change the DVD region in Windows XP). Solution: I think I had used LtnRPC in the past to remove the region from my DVD drive. It looks like Windows 7 does not like region free DVD drives (at least mine anyway). I was able to use LtnRPC to reset the region back to 1. I can now see the region tab on the DVD drives hardware properties.

  Read the article

• Sophos UTM in Hyper-V

  - by TheD

  So, I had a previous thread about this Virtualizing Firewalls/UTM. Essentially, I have configured what I think would work, but networking isn't my strong point! Two Virtual Adapters - with IP addresses 192.168.0.2 (External) and 192.168.0.3 (Internal) respectively. The External Adapater looks at 192.168.0.1 (my Zyxel) for it's default gateway. The Internal Adapter, 192.168.0.3, which is what the Sophos UTM listens on, has it's default gateway set to 192.168.0.2, the IP of the External Lan interface. So, PC (192.168.0.11, DHCP) --> (LAN) --> Switch --> 192.168.0.3 (Internal LAN Interface IP) --> Sophos UTM --> 192.168.0.2 (External LAN Interface IP) --> 192.168.0.1 --> Internet Would this be the correct setup, or am I completely out of the game here? Cheers!

  Read the article

• Formatting an HP ProLiant dl380 G4

  - by i.h4d35

  I have an old HP ProLiant dl380 G4 server whose hard disk needs to be formatted. Unfortunately, I cannot seem to do so. For one, it doesn't seem to be detecting any Hard Drives attached to the Server. The Hard Disks show up in the Ctrl+A option (SCSI Configuration Utility). Also, while inserting the SmartStart CD (7.01 or 7.04), it shows a message that no logical drives are found and there aren't any options to create one. Alternately I've tried slipstreaming the SCSI Driver into the OS but that doesn't seem to be helping. Also, I have a USB Floppy drive (for the SCSI driver) but that doesn't seem to be detected. Also, directly installing the OS (MS Server 2003 Standard Edition) obviously doesn't work (shows no hard disk found) Could anyone please advise as to what other needs to be done to format my server? Also please tell me what are the possible errors/mistakes which've been made so that I can learn from them. I went through some questions here on ServerFault and the HP guides here but they weren't of much help to a n00b like me. Thanks in Advance.

  Read the article

• Two instances of Windows Vista on boot up after failed clean install

  - by Dwayne

  I tried to install a clean version of Vista but failed. I ended up with Windows and Windows.old on my C: drive and a dual boot option on boot up. I gave up and booted up the old version and tried to rename the Windows.old to Windows and was asked if I wanted to merge the two folders. I answered yes and all seemed OK until I booted up this morning and was given the choice of two versions of Vista. The first one is the one that failed to installed correctly and the second one is the old version. How can I get rid of the failed installation? I got rid of the bad boot via MSCONFIG. Here is my current situation: several hard drives installed Using C: as my boot drive a much larger drive (H:) for storing most of my files. I found a subfolder in my C:\windows folder named windows. Upon inspection I determined it to be older than the C:\windows folder and therefore it must be the older, working version of the boot. I renamed the C:\windows folder to c:\windows.bad and moved the sub windows to the C: root directory. I also copied it to the h: drive. Now MSCONFIG reports that the copy that is booting is the h: copy. How can I change it back to the C:\ copy and can I delete the C:\windows.bad file set?

  Read the article

• Give back full control to a user on a disk from another computer

  - by Foghorn

  I have my friend's hard drive mounted externally. After messing with the permissions with TAKEOWN so I could fix some viruses, I have full control over their drive. The problem is, now it's stuck in a "autochk not found" reboot sequence. I think the problem is that the boot sector is invisible to the drive now. So my question is, How can I use icacls to give back the full ownership, when the user I am giving it to is not on my machine? I ran the TAKEOWN command from my windows 7 laptop, their machine is a windows xp Professional with three partitions, I only altered the one that has the boot sector. Here is the permissions that icacls shows: (Where my computer is %System% my username is ME, and the drive is E:\ C:\Users\ME icacls E:\* E:\$RECYCLE.BIN %System%\ME:(OI)(CI)(F) Mandatory Label\Low Mandatory Level:(OI)(CI)(IO)(NW) E:\ALLDATAW %System%\ME:(I)(OI)(CI)(F) E:\alrt_200.data %System%\ME:(OI)(CI)(F) E:\AUTOEXEC.BAT %System%\ME:(OI)(CI)(F) E:\AZ Commercial %System%\ME:(I)(OI)(CI)(F) E:\boot.ini %System%\ME:(OI)(CI)(F) E:\Config.Msi %System%\ME:(I)(OI)(CI)(F) E:\CONFIG.SYS %System%\ME:(OI)(CI)(F) E:\Documents and Settings %System%\ME:(I)(OI)(CI)(F) E:\IO.SYS %System%\ME:(OI)(CI)(F) E:\Mitchell1 %System%\ME:(I)(OI)(CI)(F) E:\MSDOS.SYS %System%\ME:(OI)(CI)(F) E:\MSOCache %System%\ME:(I)(OI)(CI)(F) E:\NTDClient.log %System%\ME:(OI)(CI)(F) E:\NTDETECT.COM %System%\ME:(OI)(CI)(F) E:\ntldr %System%\ME:(OI)(CI)(F) E:\pagefile.sys %System%\ME:(OI)(CI)(F) E:\Program Files %System%\ME:(I)(OI)(CI)(F) E:\RECYCLER %System%\ME:(I)(OI)(CI)(F) E:\RHDSetup.log %System%\ME:(OI)(CI)(F) E:\System Volume Information %System%\ME:(I)(OI)(CI)(F) E:\WINDOWS %System%\ME:(I)(OI)(CI)(F) Successfully processed 22 files; Failed processing 0 files C:\Users\ME

  Read the article

• Will having 2 MX records pointing to different mail server types cause delivery issues?

  - by Lyken

  I've inherited a setup where the mail server is exchange 2010. For some reason, I'm not sure why there is 2 MX records setup. One being the exchange server which is the higher priority while the external (non-exchange) server is the secondary mx record. I don't believe this was done for redundancy reasons as the other mail server is not set to route mail back to the exchange server (it's just the webhosts email for their hosting) The client has been experiencing disappearing email, however after my investigations its not actually disappearing, but exchange is successfully receiving the mail and then passing it on to the external server. It isn't happening all the time, just with some email messages from some domains. My question: Is exchange passing the mail on because it can see the secondary MX record and is configured (somewhere) to send mail out? If so, how do I stop it? Is it as easy as just removing the second MX record pointing to the external mail server and exchange will stop passing mail on? I'm not exchange expert so I'm kinda stumped. Exchange MX tools are saying everything is setup and configured correctly from an external point of view.

  Read the article

• Protocol to mount fat32 network filesystem on Linux with ability to lock files ( not advisory locks

  - by nagul

  I have a fat32 filesystem sitting on a NAS storage device (nslu2) that I need to mount on my Ubuntu system. I've tried Samba and NFS mounts, but both don't seem to support proper locking. More specifically, I am unable to save files to the mounted drive through GNUcash, KeepassX etc, which makes the share fairly useless. Is there a protocol that allows me to achieve this ? Note that the NAS storage device is running a linux OS so I can run pretty much any protocol that has a linux implementation. The only option I'm not looking for is to reformat the partition to ext3, which I'm not able to do due to other constraints. Alternatively, has anyone managed proper locking of a fat32 system over the network using Samba ? Or, is advisory locking the best you get with a network-mounted fat32 file system ? I've thought of trying sshfs but I've not found any indication that this will solve my problem. Edit: Okay, maybe I can reformat the drive, but to any file system except ext3. The "unslung" nslu2 doesn't like more than one ext3 drive, and I already have one attached. So any solution that involves reformatting the drive to ntfs, hfs etc is fine, as long as I can mount it on linux and lock files.

  Read the article

• DIR $file "File Not Found" vs DIR $filedir shows it....not permissions, not USB

  - by Kev

  I was having this problem before on a USB drive, but now it's happening on my main RAID5-backed hard disk: 2013-10-17 9:37 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel*" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs 2003-09-09 11:29 PM 1,056,768 Manuel d'intervention d'urgence MFC.doc 2004-06-20 10:36 PM 139,849 Manuel d'intervention d'urgence MFC.pdf 2 File(s) 1,196,617 bytes 0 Dir(s) 196,068,691,968 bytes free 2013-10-17 9:38 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel d'intervention d'urgence MFC.doc" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs File Not Found 2013-10-17 9:38 C:\> This is from a Command Prompt window where I went to Properties and told it I wanted to modify who it ran as. I opened it, had it run as me with the "restricted access" unchecked, then ran the above. The file in question has the following ACLs: Administrators, SYSTEM, and OurCompanyUsers. All three have full control of everything. Nobody has any Deny bits set. I am a member of Administrators. So I don't believe it's a permissions issue. It's not a USB drive, so this time there is no question of USB hardware. Windows Server 2003 Standard Edition SP2. What does this mean? Is this more likely a hardware or software problem?

  Read the article

• Permissions on mac for itunes library with multiple users - idea

  - by John

  I currently have a lot of music on an external drive and my itunes set up from there. However, periodically, when the external drive isn't connected, itunes will default back to the library location of my home directory user path. I don't want to mess with an external drive, as my mac HD is large enough to house the music collection. However, I have 4 family members - all with their own logins - using this same gob of music. I don't want 4 copies of the library, only one with all libraries referencing it. So, what I want to do is: 1 - move all music files to a shared directory at /Macintosh HD/users/music. I created this directory and adjusted permissions, so all four users can read and write to this directory. 2 - get all four accounts to reference this library instead of the external or local home locations I am hoping I can just check the box to keep library organized in my account, which is the admin and let itunes move it all. Then delete current libraries for each account and re-add from the new shared location. Will the itunes organization process cause permissions issues either by setting permissions to all the files access to my account only or write permissions or any other 'gotcha'? I am having a hard time coming up with a smooth solution that won't break everything and cause me to have mega duplicates or access issues. I would prefer not to do any xml library file editing if possible. Am I dreaming? Thanks for help.

  Read the article

• Robocopy launches and then hangs/just sits there

  - by NateO

  I'm setting up an archive process to store old files on an external hard drive. The computer in question is running Windows 7 Pro 32bit. We have a server folder with 150,000+ files in it, most of which are pretty small (below 200k). I'm trying to use robocopy in a batch file to do this. It was working fine the other day, now all it does upon launch is sit there. It shows me all the options and whatnot, and also lists the number of files in the directory and the directory itself, but it never gets past that line. If I switch the destination to the local C drive, it eventually starts copying files. Is there something in my batch file that needs to change? Or could there be a problem with the external Western Digital drive that I'm using? The WD drive currently is holding about 175,000 files. Here is the one line batch file I have: robocopy "\\cgifp01\Prepress\Public\ImportedPDF" "E:\OldFiles" *.* /R:2 /W:10 /MINAGE:15 /MOV /B /XJ /XF "blank_test.pdf" Thanks for any tips or ideas. Nate

  Read the article

• Files on ext4 on Drobo with corrupt, zero-ed out blocks

  - by Patrick

  I have a 2TB ext4 file system (Ubuntu running Linux kernel 2.6.31-22-server x86_64). This file system is the second drive on a Drobo box plugged in via USB. We've not had problems on the first drive (Drobo limits drive size to 2TB due to some OS limitations, so if you have more space than that it appears as two separate drives). I am sharing this files with Samba (smbd 3.4.0) with a mix of Windows and Linux workstations. Recently we've been experiencing some data corruption in multiple files. In many cases I have an un-corrupt original file stored on one of the workstations. These are binary files of various formats, (e.g. SQLite, but others as well). I used "split" to split a corrupt and uncorrupt file into 4096 byte chunks (this is the block size of the ext4 file system). I then ran md5sum on pairs of chunks and discovered that the chunks matched in many cases and in every case where they did not match, the corrupt chunk was a solid chunk of zeroes (620f0b67a91f7f74151bc5be745b7110 for what it's worth). I'm trying to track down a culprit but am a bit at a loss. I don't believe Samba is at fault since I'm using it without issue on the first drive exported by the Drobo. What can I do to narrow this down and find out what's going on?

  Read the article

• Why do I get a DegradedArray event with mdadm

  - by azera

  Hello Just so we're clear on what's happening: I bought 4 new sata 2 drives, with the intent of using them in a raid5 all drive are fully recognised by both my bios and my linux box (gentoo) I created a raid5 array, fiddled a bit with it to understand how it works, how to monitor ect At some point, this triggered a degradedarray event, even though the array is brand new. I tried to stopping the array and recreating a new array with the same drive but the new array starts degraded too. here is what I used to create it mdadm --create -l5 -n4 /dev/md/md0-r5 /dev/sdb /dev/sdd /dev/sde /dev/sdf here are the output from my /proc/mdstat and mdadm --detail --scan **mdstat** Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md127 : active raid5 sdf[4] sde[2] sdd[1] sdb[0] 4395415488 blocks level 5, 64k chunk, algorithm 2 [4/3] [UUU_] [>....................] recovery = 2.8% (41689732/1465138496) finish=890.3min speed=26645K/sec unused devices: <none> **detail** ARRAY /dev/md/md0-r5 metadata=0.90 spares=1 UUID=453e2833:81f22a74:64188b84:66721085 As such I have a couple questions: does a raid5 array always start in degraded mode at first ? why does sdf have the number 4 between bracket instead of 3, why does it see a spare disk and why is the 4th drive marked with _ instead of U ? (bad configuration ?) How can I recreate the array from scratch, do i have to format each drive on its own before recreating it ? Thanks for any help, I'm not sure about what I should do at the moment

  Read the article

• Do registry issues with Win7 persist through a recovery from a system image?

  - by user59089

  So I need a bit of advice, please; here's my situation: I have 1) a system image on an a brand new external 1 TB SATA drive, that I managed to successfully capture before my 2) primary system drive went down. I realize this is a fairly simple matter of buying a new primary drive and performing the recovery to the fresh disk...however, the issue is that I believe Win7 was also having some significant issues of its own--basically, Update unable to install updates, and Backup continually ditching the auto backup schedule. I'd been trying to address those issues when my system was still working, but it's been so fruitless, I'm convinced a Win7 re-install would be best, and now I'm concerned that if I was in fact having what I believe are likely registry-related issues before, that these will persist through a recovery--would that likely be correct? I'm mainly worried about recovering my files, so if I did a full recovery from the image, should I be able to then access my individual files, and copy them manually to an external drive, so I can then do a full re-install of Win7? Sory if this seems obvious, but I've never done a recovery before and just trying to make sure there's no red flags with what I have in mind...

  Read the article

• Had almost 300 GB worth of files with random names on my computer, and now they are gone. Any idea what they were and where they went?

  - by John

  A couple of days ago I noticed I had a folder on my computer with more than 15 files in it. All the files were the exact same size (215 MB). They all had different names (just a bunch of random characters like Abe327(/-38s etc. I wasn't sure what they were so I decided to try to delete them. But then I noticed they disappeared from the D drive. Then the next day I noticed a new folder, with similar names and file sizes showed up on my C drive. The timestamps on the first set of files was almost all from a few months ago. Like the timestamps were saying 3:52 AM, 403 AM, etc. all from the same date. Then the set of files on the C drive that just appeared had yesterday's date on them. But similarly, all the files had timestamps within a 24 hour period. Like they had all just been created. Now this morning, all of those files are gone, and I didn't delete them. There are now no files like this in either drive. Any idea what these files were? Why were they so large, and why are they switching drives? Why did they disappear completely now, after the initial files were there for a few months.

  Read the article

• Mac Grey/White Screen of Death

  - by cust0s

  The other night I updated my iTunes to the latest version (through Software Update) when I came to turn on my computer I was greeted with the dreaded white screen of death. I use an early 2008 iMac 24". I've tried the basic things, unplugging/turning off accessories, trying to boot from the install disk, reseting pram, etc, etc. Still no luck and no change what-so-ever. All I've been able to ascertain that my keyboard still works (by ejecting). I should point out that I did recently replace my Hard drive with a Western Digital Black 500GB (though the computer is well out of warrenty) and I'm a little concerned that the problem could be the screen. Update (18/05/10): I've been told that I could be getting the White/Grey screen of death because the optical flex cable is damaged (aparently this is common). Apparently the Optical Drive is part of the POST sequence, and an inability to read the drive can result in failure for the system to move on to other bootable volumes. More info here. I will disable the optical drive and see if that works.

  Read the article

• BackupPC - why does it use rsync --sender --server ... ?

  - by Jakobud

  I'm in the process of experimenting with BackupPC on a CentOS 5.5 server. I have everything pretty much setup with default values. I tried setting up a basic backup for a host's /www directory. The backup fails with the following errors: full backup started for directory /www Running: /usr/bin/ssh -q -x -l root target /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Xfer PIDs are now 30395 Read EOF: Connection reset by peer Tried again: got 0 bytes Done: 0 files, 0 bytes Got fatal error during xfer (Unable to read 4 bytes) Backup aborted (Unable to read 4 bytes) Not saving this as a partial backup since it has fewer files than the prior one (got 0 and 0 files versus 0) First of all, yes I have my ssh keys setup to allow me to ssh to the target server without requiring a password. In the process of troubleshooting, I tried the above ssh command directly from the command line, and it hangs. Looking at the end of the debug messages for SSH I get: debug1: Sending subsystem: /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Request for subsystem '/usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/' failed on channel 0 Next I started looking at the rsync flags. I did not recognize --server and --sender. Looking at the rsync man pages, sure enough, I don't see anything about --server or --sender in there. What are those in there for? Looking at the BackupPC config I have this: RsyncClientPath = /usr/bin/rsync RsyncClientCmd = $sshPath -q -x -l root $host $rsyncPath $argList+ And for the arguments, I have the following listed: --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive Notice there is no --server, --sender or --ignore-times. Why are these things getting added in? Is this part of the problem?

  Read the article

• Configuration Help for Sendmail Required

  - by Vinayak Mahadevan

  Hi I need some help with respect to sendmail configuration. The basic problem is that I have some employees working from other places and they need access to their mail. So what I have done right now is whatever mails which are meant for them which are generated from within the company and collected by my internal mail server is bounced to an external mail server from where the employees access it. This is done through a email id on a different domain. This was working fine till I restricted the external mailing access for certain users using rulesets in sendmail.cf. Once I had put that in place only people who had external mailing rights could send mails to people outside the office. What I would like to know is that is there anyway where I can expose sendmail on two different ips and thereby configure everybody's email id to point to the same internal mail server using 2 different ips. one ip when inside the company and one ip outside the company. Is it possible that I have one static ip configured for both internal access and external access or is there any otherway it can be done with sendmail. Can anybody help me Sorry for the long post Regards Vinayak

  Read the article

• Unix Permissions: Enable access to files no matter the user?

  - by TK Kocheran

  I've been using Linux for a long time and I still am completely in the dark about how file permissions really work. With that in mind, does anyone have any books or thorough guides I could read to really understand things completely? I've done my fair share of sysadminning, so I know the easy stuff like making directories readable and writable, making files executable, and changing the owner of a file, but on sharing files across users, I'm lost. Here's my main problem. I have a number of machines across which I intend to synchronize my music library. I've been using Unison for a while now and it's a great choice as I can easily run it over SSH on my local network which I just set up. Win-win. Up until this point, I've been synchronizing computers using a 2TB external hard drive. (computer 1 unisons to HD, computer 2 unisons to HD, etc.) This is tedious at best, especially since I encrypted the drive, making it a huge hassle to hook it up to all of my machines and sync it. Anyway, the drive is running ext4 (in TrueCrypt), so it maintains all Unix filesystem info like owners and groups. I just set up a new machine and just Unison'd it to get the music on it, and I realized that now, all of my permissions are fubar. I had to run Unison as root since that was the only way I could get the files to come off of the external drive. Apparently, since I'm using a different user name on this machine than my usual "rfkrocktk" across all machines, this essentially throws a huge wrench in the gears. Here's my use case. This laptop has two effective users, "leandra" and "rfkrocktk". I want to share music between these two users, so I symlinked /home/rfkrocktk/Music to point to /home/leandra/Music. How do I (a) allow both users access to read/write/delete files in this folder, and (b) keep everything nicely in sync without messing up file ownership?

  Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >