Search Results

Search found 26742 results on 1070 pages for 'linux kernel'.

Page 262/1070 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

• Xen 4.1 host (dom0) with blktap disks ("tap:aio:") not connecting

  - by Manwe

  Problem using blktap with xen-4.1 running Ubuntu Precise stock kernel with dom0 xen-4.1. I get: [ 5.580106] XENBUS: Waiting for devices to initialise: 295s...290s. ... [ 300.580288] XENBUS: Timeout connecting to device: device/vbd/51713 (local state 3, remote state 1) And some syslog lines: May 17 13:07:30 localhost logger: /etc/xen/scripts/blktap: add XENBUS_PATH=backend/tap/10/51713 May 17 13:07:31 localhost logger: /etc/xen/scripts/blktap: Writing backend/tap/10/51713/hotplug-status connected to xenstore. with tap:aio: disk lines. file:/ works. disk = [ 'tap:aio:/data/root.img,xvda1,w', ] Problem exists with lucid and precises domU kernels and both guests work in Ubuntu hardy dom0 Host 64bit 2.6.24-28-xen xen-3.3 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise

  Read the article

• Are there any command line utilities which can calculate and/or limit how fast a pipe is running?

  - by stsquad

  I'm doing some basic stress testing of a Linux kernel network IWF with netcat. The set-up is fairly simple. On the target side: nc -l -p 10000 > /dev/null And on my desktop I was running: cat /dev/urandom | nc 192.168.0.20 10000 I'm using urandom for some poor-mans fuzz testing. However I find that even at this rate I can break something quite quickly. EDIT So I've been playing with trickle to rate limit how fast I'm generating data: cat /dev/urandom | trickle -u 10 nc 192.168.0.20 10000 But it's hard to tell if this is working. What would be really useful is a the pv equivilent of trickle that can work with pipes.

  Read the article

• Meaning of Bridge-Check in iptables flowchart

  - by networkIT

  In the famous iptables flow-chart what does bridge-check exactly stands for ? I couldn't find any documentation. The only clue I found was while scanning the MikroTik RouterOS documentation ( RouterOS is build upon a Linux 2.6.16 kernel ), I found this : In-interface Bridge = Checks if the input interface is a port for a bridge or is the bridge. Manual:Packet Flow Comparing both flow-charts brings clues that iptables Bridge-check might equal MikroTik In-Interface Bridge. Is this true ? Else, what might be the meaning of iptables Bridge-Check ?

  Read the article

• Why is my ethernet interface in promiscuous mode

  - by nhed

  I read that seeing a flag of M in netstat -i is the way to tell which of your interfaces is in promiscuous mode I run it and I see that eth1 is in promiscuous mode $ netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth1 1500 0 1770161198 0 0 0 57446481 0 0 0 BMRU lo 16436 0 97501566 0 0 0 97501566 0 0 0 LRU This seems to be the case on all the machines I checked (All Centos6.0, both virtual and physical), any idea why ethernet devices would be in such a mode unless someone was running any pcap based app (sudo lsof | grep pcap shows nothing)? I did not see any mention of promiscuous in any of the config files (sudo grep -r promis /etc) Any ideas what puts the interface into that mode and why? p.s. most of the posts I see seem to be security related, this is not that

  Read the article

• Does lshw list the "factory" speed of a memory module or the effective speed and how to find the former?

  - by Panayiotis Karabassis

  I hope I phrased this correctly. lshw gives: description: DIMM Synchronous 400 MHz (2.5 ns) product: M378B5773CH0-CH9 vendor: Samsung physical id: 0 slot: DIMM0 size: 2GiB width: 64 bits clock: 400MHz (2.5ns) And indeed the memory speed is set is set to 800MHz in the BIOS, which I think makes sense since it is a double rate. On the other hand, Googling strongly suggests that to this product number corresponds the PC3-10600 type, which is 1333MHz, not 800MHz. And this seems to be confirmed in the BIOS, where if I select Auto for memory bus speed, 1333MHz is selected "based on SPD settings". However in the latter case, the computer does not boot, i.e. the kernel panics, complaining that something attempted to kill the Idle process. So, I am I am beginning to suspect that I have been given defective memory, the technician that installed saw this, and lowered the bus speed. Is this a possibility?

  Read the article

• Weird RAM Upgrade Experience

  - by Axel Isouard

  I have a laptop, HP EliteBook 8540p having originally 4GB RAM and I've recently bought Corsair Value Select SO-DIMM 16 Go (2x 8 Go) DDR3 1333 MHz. It fits the required RAM specifications perfectly, and once I've inserted them, the BIOS recognizes the memory correctly, but my linux Gentoo running on kernel 3.1.6 SMP x86_64 crashes immediately when I'm running an app which consumes a lot of memory. The laptop crashes as if there's no more battery left, when the memory reaches at least 6000MB ram. Windows 7 doesn't want to run anymore, it shows a blue screen with the IRQ LESS OR EQUAL error if I set 8GB, and it doesn't boot at all if I set 16GB. Is there something I could do to fix this please ?

  Read the article

• Entire filesystem restore from rdiff-backup snapshot

  - by atmosx

  I'm trying to make a complete system restore from an rdiff-backup. The cli for backing was: rdiff-backup --exclude-special-files --exclude /tmp --exclude /mnt --exclude /proc --exclude /sys / /mnt/backup/ebox/ I created a new partition mounted the partition at /mnt/gentoo and did: rdiff-backup -r /mnt/vol2 /mnt/gentoo However when I try to chroot to this system (following gentoo's manual, which means mounting /dev/ and /proc) I get the following error: chroot: failed to run command/bin/bash': No such file or directory` All this takes place on a Parallels (virtual machine) Debian installation. Any ideas on how to proceed in order to fully restore the system? Best Regards ps. /mnt/gentoo/bin/bash works fine if I execute it. All files and permissions are in place rdiff-backup seems to work just fine. However the system cannot neither boot (exits with kernel panic - cannot find init) or be chrooted.

  Read the article

• Unable to use cloned VM, OpenSUSE, VirtualBox

  - by Kremchik

  I've cloned a VM and now while booting it I see a message: Trying manual resume from /dev/sda1 Invoking userspace resume from /dev/sda1 resume: libgcrypt version: 1.5.0 Trying manual resume from /dev/sda1 invoking in-kernel resume from /dev/sda1 Waiting for device /dev/disk/by-id/ata-VBOX_HARDDISK_.....-part2 to appear: ... Could not find /dev/disk/...-part2 Want me to fall back to /dev/disk/...-part2 (Y/n) If I press 'Y' it tries to boot again with failure, then exits to /bin/sh. If I press 'n' it exits to /bin/sh immediately. I've read a solution here: http://diggerpage.blogspot.com/2011/11/cannot-boot-opensuse-12-after-cloning.html but I don't understand how to access files on disk to edit /etc/fstab and /boot/grub/menu.lst?

  Read the article

• PHP application failed to connect after a network plugged back in

  - by tntu

  My data-center appears to have had some issues with their network and thus my server has suffered from on an off network connectivity for about an hour. After the connection has been completely re-established my code still kept reporting the same issue over and over until I have restarted the service. The code is a simple PHP code that loops forever checking the Apple feed-back server and then sleeps for a few minutes and then it begins all over again. Now I understand the error being generated if the network is down but once it got back up why did it continue until I have restarted the code? Does PHP have something that needs to be re-initialized or something?? Messges log: Dec 20 08:57:22 server kernel: r8169: eth0: link down Dec 20 08:57:28 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:29 server kernel: r8169: eth0: link down Dec 20 08:57:33 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:33 server kernel: r8169: eth0: link down Dec 20 08:57:37 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:38 server kernel: r8169: eth0: link down Dec 20 08:57:44 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:44 server kernel: r8169: eth0: link down Dec 20 08:57:52 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:52 server kernel: r8169: eth0: link down Dec 20 09:10:58 server kernel: r8169 0000:06:00.0: eth0: link up PHP Error: PHP Warning: stream_socket_client(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /home/push/feedback.php on line 36 Code Line 36: $apns = stream_socket_client('ssl://feedback.sandbox.push.apple.com:2196', $errcode, $errstr, 60, STREAM_CLIENT_CONNECT, $stream_context);

  Read the article

• GRUB2 not detecting OS on raid partitions

  - by sleeves

  I have recently added a drive to a system and have successfully raid'ed (RAID-1) the paritions, with the exception of the boot partition. I have it ready and mirrored, but can't get GRUB2 (update-grub) to find it. System: Ubuntu 11.04 Raid Metadata: 1.2 If I run update-grub, it finds the kernel images on the /dev/sda2 partition (present root) but not the images on /dev/md127. /dev/md127 is composed of "missing" and "/dev/sdb2". fdisk on /dev/sdb confirms that sdb2 is of type fd (raid autodetect) and is also flagged bootable. I have two things I want to do. Make the boot.cfg on /dev/sdb2 have a menu option to have the root be /dev/md127 Install grub onto /dev/md127 so the actual boot.cfg from there is being used. Thanks!

  Read the article

• Is it reasonable to make a RAID-1 array with a ram disk and a physical disk to maximize read performance and protect data?

  - by Petr Pudlák

  In one of the answers on SO (I forgot which one) I've seen a suggestion to make a RAID-1 array composed of a RAM disk and a physical partition. By adding the physical partition with --write-mostly and enabling --write-behind the system should read everything instantly from the RAM disk but still save all data to the physical partition so that the data are preserved and the RAID array can be assembled again after reboot. Is such a setup reasonable? Will it perform any better in some scenario than having just the physical partition and perhaps tweaking the kernel to favor disk cache (swappiness and vfs_cache_pressure)?

  Read the article

• slow software raid

  - by Jure1873

  I've got software raid 1 for / and /home and it seems I'm not getting the right speed out of it. Reading from md0 I get around 100 MB/sec Reading from sda or sdb I get around 95-105 MB/sec I thought I would get more speed (while reading data) from two drives. I don't know what is the problem. I'm using kernel 2.6.31-18 hdparm -tT /dev/md0 /dev/md0: Timing cached reads: 2078 MB in 2.00 seconds = 1039.72 MB/sec Timing buffered disk reads: 304 MB in 3.01 seconds = 100.96 MB/sec hdparm -tT /dev/sda /dev/sda: Timing cached reads: 2084 MB in 2.00 seconds = 1041.93 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.77 MB/sec hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 2150 MB in 2.00 seconds = 1075.94 MB/sec Timing buffered disk reads: 302 MB in 3.01 seconds = 100.47 MB/sec Edit: Raid 1

  Read the article

• Munin "Available entropy" when using adress space layout randomization

  - by clawspoon

  Having just configured munin for statistics logging on my gentoo server (hardened profile), I am noticing that my "Available entropy" is consitently in the 200-300 range. This seems way to low, so I checked it manually using the command $ cat /proc/sys/kernel/random/entropy_avail 3544 Odd. Consistently very low values in Munin and practically filled up when checking manually. After thinking about the problem for a while I came to the conclusion that the problem is probably that I'm using Adress Space Layout Randomization which is using the entropy when running commands/programs. Since Munin runs a whole slew of programs all the entropy is used up, and Munin then measures how much entropy there is, resulting in the low values. Does anyone have any experience with this? How can this be avoided?

  Read the article

• Display "iftop" on web

  - by DmitrySemenov

  I do iftop -i eth1 > out.txt It does produce the file with "encrypted" UI content such as [(B[)0[[1;80r[[mO[[?7h[[?1h[=[[H[[J[[0;7mO Listening on eth1 [[1;48H[[mO12.5Kb Is it possible to display this as a web xhtml output somehow? cat out.txt on my console does produce a normal iftop window but when I do the same thing over the web I get the content above. I understand that it is "managed" on kernel level. Is the task that I want to perform possible?

  Read the article

• Linux Centos 6 becomes unavailable from time to time - OS&network issue

  - by adoado0

  I am encountering following problem. There is one server (DL160 G5) running Centos 6.3 with default kernel 2.6.32-220.2.1.el6.x86_64 - at this point I'd like to add that issue appeared also at older version - 6.1 and older kernel (do not remember exactly which version). There is cPanel installed and from time to time it becomes unavailable (network connection). What I've checked is (via KVMoIP): load average is completely normal it does not lack memory or disk space when problem occurs no console notifications checked all access logs and there is no sign that it can be caused by a client script cannot even access local interface (127.0.0.1) or main IP address running tcpdump I can only see packets arriving to server - no responses all services seem to be running properly (mail,sql,http,ssh) checked crontab and all clients' crontabs too network port utilisation is low ( up to several Mbits) arriving packet rate is low - hundreds per second (according to tcpdump) console (via kvmoip) works fine, no lags there is no conntrack at this server there is no ipv6 at this server flushing iptables, unloading modules does not resolve problem restarting network does not resolve problem, no errors appear it also occurs when two sepearate networks are configured (and multiple gateways) as well as one IP, one default gw and one network is configured - so it seems network configuration independent it seems to repeat randomly (load,packet rate,bandwith usage,load independent) checked server with different rootkit detection tools - it seems to be clean server has been rebooted, it did not change anything there are no interface errors it apperas randomly can be once a week or several times per day It usually works fine after 1-15 minutes. What I can also check? It is definitely OS issue - there is traffic at interface only in one direction when problem occurs, can not even ping loopback. Any ideas? Recommended checks? Anything I did not checked above.

  Read the article

• writting becomes slow after few writes

  - by user1566277

  I am running an embedded Linux on arm with a SD-Card. While writing huge amounts of data I see bizarre effects. E.g, when I dd a 15 MB file few times, it writes the file (normally) in less than 2 Secs. But After lets say 3-4 times it takes sometimes 15 to 30 Seconds to write the same file. If I sync after writing the file, then this does not happen but sync takes long time too. If there is enough gap between writing two files than presumably kernel syncs itself. How can I optimize the whole performance so that write should always finish inside 2 Seconds. The File system I am using is ext3. Any pointers?

  Read the article

• Top causes of slow ssh logins

  - by Peter Lyons

  I'd love for one of you smart and helpful folks to post a list of common causes of delays during an ssh login. Specifically, there are 2 spots where I see a range from instantaneous to multi-second delays. Between issuing the ssh command and getting a login prompt and between entering the passphrase and having the shell load Now, specifically I'm looking at ssh details only here. Obviously network latency, speed of the hardware and OSes involved, complex login scripts, etc can cause delays. For context I ssh to a vast multitude of linux distributions and some Solaris hosts using mostly Ubuntu, CentOS, and MacOS X as my client systems. Almost all of the time, the ssh server configuration is unchanged from the OS's default settings. What ssh server configurations should I be interested in? Are there OS/kernel parameters that can be tuned? Login shell tricks? Etc?

  Read the article

• How do I configure a swap partition using swapspace

  - by jcalfee314

  I finally have the swapspace project installed and running (via init.d). The purpose is to have a dynamically re-sizing swap partition. I'm clueless however on how to use it. It has good documentation but just does not go into that last step. How to I configure a swap partition using swapspace? The process is probably the same for any 3rd party program that would provide a swap space implementation to the kernel. I know this was intended to run as a process because the project provides an init.d script.

  Read the article

• Doing "text mode 'splash' game" during boot.

  - by Vi

  Sometimes I want to do something (for example, playing a simple text-mode game) while the system is booting up. This is especially useful when lengthy reiserfs transaction replays are happening. Current hacky way of doing it is: Put the program on initramfs. Before running /sbin/init, "openvt 2 /my/program". Turn off messages from kernel (sysrq 0) Override /dev/console with /dev/null (to prevent boot messages). The problems are: There are STILL some messages interfering with program output. I can't see boot messages by switching to that virtual terminal back. After finishing the boot sequence, /dev/tty2 ends up being attached both to getty and my program. How to do it properly without of running graphical splashes? The system is Linux Debian Squeeze, no dependency based sysv scripts.

  Read the article

• Ubuntu stops auto-mounting flash drive

  - by Brian

  It seems that after being up for a few days, my Ubuntu system refuses to auto-mount hot-plugged USB disks (i.e. flash drives). The output from dmesg shows that the kernel recognizes the device correctly. The only solution I'm aware of at the moment is to reboot (logging out may work as well, but the impact is the same since I have a bunch of stuff open and it takes a few minutes to get everything situated after startup/login). I thought gvfs-fuse-daemon was the thing responsible for managing filesystems in userspace, but killing and restarting that doesn't help. Any other ideas?

  Read the article

• Migrating a running production server to Xen, unmodified as a second HDD?

  - by DaveCol

  I have a production server which I am looking to virtualize via XEN. For this purpose I have purchased a new Sata HDD, in which I have promptly installed CentOS 5.5 x64 with XEN server installed. Now I have two HDD: /dev/sda1 running as host with Xen Server Installed; and /dev/sda2 which is the HDD where the original server has installed. Is it posible to use /dev/sda2 to work as GuestOS in a xen server? Would I have to modify its kernel? Thank you for any input

  Read the article

• Bonding and default gateway problem (CentOS)

  - by lg

  I configured network bonding on two machine with centos 5.5. Bonding works well, but the problem is default gateway: it is not configured! I follow this tutorial. I added GATEWAY in both (and either) /etc/sysconfig/network and /etc/sysconfig/network-scripts/ifcfg-bond0. But, when I restart network (or server) there is no default gateway (route command). This is ip route ls output after network restart: 10.0.0.0/16 dev bond0 proto kernel scope link src 10.0.0.88 Where is my mistake?

  Read the article

• nfs mount fails in Ubuntu 10, but not with -v

  - by stuartreynolds

  (1) mount -t nfs remotehost:/remotedir localmountpoint -o owner,rw (2) mount -v -t nfs remotehost:/remotedir localmountpoint -o owner,rw (1) Used to work with Ubuntu 9 and now fails with Ubuntu 10 (2.6.32-21-generic kernel) with the error: mount.nfs: an incorrect mount option was specified Strangely, adding -v (verbose) in (2) makes the problem go away. This is currently a blocker for me because the fstab line: remotehost:/remotedir localmountpoint nfs owner,rw 0 0 causes the same error (I don't believe I can specify verbose in fstab). Is this a bug in mount or my options really incorrect?

  Read the article

• Running Ubuntu off a USB drive?

  - by Solignis

  I was wondering if a USB 2.0 Thumb drive has enough bandwidth to act as a primary system drive in an Ubuntu Linux server. More specifically an SAN server. I am running an iSCSI target, ZFS and NFS-kernel-server, BIND9 (Slave), and Openldap (Slave). I was thinking of resorting to a thumb drive because my new motherboard only has 4 SATA ports and I have 5 disks. 4 (ZFS Pool) 1 (System). And unless I get an expansion card there is no way to get more SATA ports. This "server" leans more twords a home server. I use in my lab with my VMware server. It provides storage, or atleast it did until it died. Would it still be better to go with the SATA hard disk?

  Read the article

• Key is not detected in xev neither showkey -k in Ubuntu 10.04 in a Virtualbox VM.

  - by Somebody still uses you MS-DOS

  My question mark key in my keyboard isn't working. ("?"). I've tried to use xev and showkey -k to try to identify at least it's code and manually use xmodmap to mao this key. Unfortunately, the keys aren't being detected in neither utilities. I'm using Ubuntu 10.04 in a Virtual Machine, and my Kernel is 2.6.32-22-generic. What can this be? It's not a special multimedia key, it's a simple one. I would like to understand what exactly is happening so at least I can try to better debug this issue.

  Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >