Search Results

Search found 17870 results on 715 pages for 'screen resolution'.

Page 263/715 | < Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >

• Upgrade went wrong, laptop essentially 'bricked'

  - by hexagonheat

  I have an old netbook I was trying to upgrade from 10.04 to 10.10. Ubuntu was in the process of upgrading when everything completely froze. I left it sit for an hour but it would not respond to anything. So I powered down the machine and it didn't have the necessary files to run Ubuntu. I went to the terminal and it told me to put in some command that I can not remember to 'rebuild' something. That takes me to now, when I turn on the laptop it comes up with a screen "GNU GRUB version 1.98+20100804-5ubuntu3.3" and has a bunch of options such as: 1. Ubuntu, with Linux 2.6.35-32-generic 2. Ubuntu, with Linux 2.6.35-32-generic (recover mode) etc. (there are like 15 of these with different numbers after 2.6.35 and the word 'generic'. It doesn't seem to matter what I pick, it will go to the "Ubuntu" loading screen with the colored dots but then every time it will freeze and I have to reboot to the same thing. I can't seem to get a terminal prompt anywhere either. Any ideas? I can't think of what to do :(

  Read the article

• Can't set 1280x1024 with Nvidia Geforce 8400 GS

  - by torbengb

  I've just installed 10.04 LTS using the Windows installer. The system hangs during boot; the splash screen is frozen and it accepts neither Ctrl+Alt+F2 nor Ctrl+Alt+Del, only a hard reset. (I'm a linux noob.) When I edit the default Grub boot option to omit quiet splash, it gets to the point saying * setting sensors limit [OK] _ and there it stays. I can only get to the desktop using the Grub recovery boot option, of course with a lower resolution (800x600) but everything else seems to work fine. As I said, this is a new install. The only thing I've done is to use the Update Manager to get everything up to date, and activate the newest Nvidia driver using the "Hardware drivers" window. I had a similar problem when I installed 9.04 a year ago, and at that time posted this question with an answer that worked - this doesn't work with 10.04. Running nvidia-xconfig to create a new xorg.conf didn't fix it either (while in Recovery boot).

  Read the article

• Cant install windows 7(boot problem)

  - by Vadiklk

  First of all, I cant boot my windows 7. I get a black screen with a cursor up in the left corner. So, I tried using windows 7 installation which I've put on my flash drive. To boot from the drive, I've changed the boot order to boot from the drive first. It boots but does not find any HDD to install the windows on(which is pretty logic, I dont boot the HDD soon enough for the installer). but if i put the HDD in front of the flash drive in the boot order, it will just try to load windows 7 and i will get the black screen again. I've tried putting the HDD first and clicking f8 a lot. All I've got is an error. Something about some software change. I dunno. Help me please, cant do anything with my laptop till then.

  Read the article

• Force a Windows 7 user to change password when it has expired

  - by Joshua King

  Is it possible to force users (on Windows 7 PCs) to change their password once it has expired? Currently our users get notifications that their passwords will expire in 7, 3, 2 and 1 days but once the password has expired they are still able to log into their machines with the expired password. Most of our users ignore the warnings and don't change their password until we tell them they have to (when they ring Help Desk asking why their email and intranet isn't working). From memory, Windows XP machines would show a message at login that the password had expired and then offer the change password screen. Is it possible to do the same thing under Win7? Similar to how if you set a user's account to "must change password at next login" it gives the change password screen automatically.

  Read the article

• help download and install and save and use my wireless stick modem and software

  - by ADAM

  i installed Linux Ubuntu after my win os went totally dead by fatal blue screen. cannot reboot or install form CD ROM or get safe mode i installed Linux Ubuntu i still unable to install my wireless stick usb modem to connect and surf the Internet wireless form my provider. i use wireless network from neighborhood And i find it difficult to download and install and save porg and application from the INTERNET like skype and real player and others. it is different form windows and not that easy to use. i click to download for example and find real player but when click on it it opens as text file only and i cannot use it as it should be used for video and download and record from you tube. how to do it. and is there with Linux Ubuntu similar prog to download and record and save from you tube as in windows? Is there any trick to restart or reboot windows OS from the dead. can i use linux to reboot windows or to import my files from the blue screen stopped windows7? Any help is highly appreciated. thanks please email me to : [email protected]

  Read the article

• Why do LCD screens need a backlight? (seriously)

  - by Tudor

  Bare with me on this, I'm well aware that most LCDs have backlights. But what if, they DIDN'T? I spend long hours in front of a screen and I hate the concept of staring into a lightbulb all the time and my eyes getting sore. I need to get a new lcd (some sort of IPS that doesn't cost a fortune) soon, but no matter what I'll get, I'll still be looking at a damn light. How come you can read on a kindle w/o a backlight but there aren't any monitors like that? I mean, ideally, a screen should be like a book or any other object in real life. Just for curiosity's sake, does anyone know of any new monitor concepts? Also, http://www.indiaonrent.com/view/l/laptop-transparent-monitor.html hah!

  Read the article

• How do install Ubuntu from a USB stick?

  - by Sophia

  When I go to the boot menu on my computer and select USB stick, the screen goes black and there comes a flickering underline. Like I could write something. But I can't. Whatever I push, nothing happens. Except the PrintScrn/SysRq button. When I push it, mu computer beeps. I get no choose menu. Nothing. I found out the usb stick is in msdos format. So what format should I use and how can I format it? I am not a computer geek who knows everything. I'm just a beginner. And only 16 years old. I've got a new problem. The screen isn't black anymore. Now there comes an error message: SYSLINUX 4.04 CHS 20110518 Copyright (C) 1994-2011 H.Peter Anvin et al ERROR:No configurationfile found No DEFAULT or UI configuration directive found! boot: And when I write something: boot:example Could not find kernel image:example boot: Why does this fail all the time? ps. I'm using Ubuntu Oneiric 11.10.

  Read the article

• Laptop overheating within minutes of start up

  - by Spik330

  I have a Dell Windows 7 Home Prem with an I7-720QM. More information on the computer can be found here http://www.dell.com/support/home/us/en/04/product-support/servicetag/51CVCN1/configuration The Problem I am having is the computer will over heat unnaturally fast. From the time it takes from boot to when i can run my diagnostic tools which takes about two minutes the cpu temp is 86c after a few more minutes the cpu temp will reach 100 and the computer will black screen shut down. In total the the laptop can only be run for 3-5 minutes before completely shutting off. During this time there is nothing extensive running. After the laptop shuts down you have to wait for it to cool down or it will shut off even faster sometimes 7-15 seconds well still in the boot screen. Does anyone know what could be the problem maybe a sensor or is the computer fried?

  Read the article

• How to revert to "last known good configuration"

  - by Ripley

  Hi Guys. I failed to install ubuntu 10.04 with WUBI, for some reason it's showing me the root partion is not defined. I'm bored to fight with it so I just removed ubuntu in windows. However this installation made my original Windows XP cripple, a normal boot will end up with a blue screen, error code 7E, I'm still able to boot with the 'last known good configuration' tho. My understanding is booting like this will recover things and I'm supposed to be good when reboot, while this is not the case for me, I have to choose the 'boot from last known good configuration' each and every time to work around the blue screen. Could you suggest how could I resolve this? I feel it's foolish having to waste 10 more seconds each time starting the OS.

  Read the article

• Moving LiveMeeting admin functions to a different window

  - by Rob Farley

  I run a user group, and often host LiveMeeting sessions. I use a projector, with a crowd watching. How do I do the admin stuff (respond to Q&A, etc) on one window, and just have the video on the 'extended monitor'? I dont' want the people in the audience to see anything except the video feed, but I want to be able to watch questions come in, etc... Note: I don't have a problem extending the screen across the two monitors - I already have different stuff showing on my screen compared to the projector. I just want a way to put the LM video on Monitor 2 (projector), and the LM controls on Monitor 1.

  Read the article

• How can I get back my deskopt? the left and top panels

  - by Hunsullivan

  I installed the Ubuntu 12.10 and the driver for ATI Radeon HD 4330 (AMD Catalyst™ 12.6 Proprietary Linux x86 Display Driver) and the latest updates. After the restart now I can see only the deskopt backgrund and nothing more. No left or top panels. The resolution changed to 1024X768 and the graphic changed to: VESA:M92. What happened? Is there something wrong with the driver? How can I solve this? I'am a beginner, please answer according to this. Thank you!

  Read the article

• Same SCSI drive appears multiple times on the controller list

  - by ohad

  Hi, I have an Adaptec AHA-2940UW SCSI adapter, to which I connected a single Atlas 10K III drive (and nothing more). When my computer loads up, the pre-OS Adaptec screen shows (I believe this is called the POST screen), where I can see the Atlas drive listed many times (i.e. with ID0, ID1, ... ID5, ID7, ID8,...,ID15 [ID6 is the adapter itself]) Using the same HD on an Adaptec AHA-2940UB the disk only shows once Since my OS hasn't been installed yet, I'm not sure if this is a problem (I would guess it is), and if so - how to solve it. Termination and multiple LUNs come mind, but the cable provides termination and I don't see why a hard drive would request multiple LUNs, especially considering it is not jumpered at all, and multuple LUN support is disabled in the Adaptec controller BIOS (via the SCSISelect utility) Thank you

  Read the article

• Nvidia Drivers on Debian / Lenny (Stable) -> Installation successful -> Monitors gets black

  - by David

  I have successfully installed the proprietary drivers for my nvidia (geforce 7300 gt) graphics card on debian/lenny. I know its not the best way to chose for driver installation ( see this link: http://wiki.debian.org/NvidiaGraphicsDrivers#non-freedrivers ). but the two ways seem to be possible for me (nvidia-kernel module compilation). Now the problem is that the monitors gets black, the power light starts blinking after i launch the x-server. Have a short look a the logs (output truncated from /var/log/Xorg.0.log): (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) Jul 28 17:10:11 NVIDIA(0): Enabling RENDER acceleration (II) Jul 28 17:10:11 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) Jul 28 17:10:11 NVIDIA(0): enabled. (II) Jul 28 17:10:11 NVIDIA(0): NVIDIA GPU GeForce 7300 GT (G73) at PCI:1:0:0 (GPU-0) (--) Jul 28 17:10:11 NVIDIA(0): Memory: 262144 kBytes (--) Jul 28 17:10:11 NVIDIA(0): VideoBIOS: 05.73.22.25.00 (II) Jul 28 17:10:11 NVIDIA(0): Detected PCI Express Link width: 16X (--) Jul 28 17:10:11 NVIDIA(0): Interlaced video modes are supported on this GPU (--) Jul 28 17:10:11 NVIDIA(0): Connected display device(s) on GeForce 7300 GT at PCI:1:0:0: (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): 165.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Single Link TMDS (II) Jul 28 17:10:11 NVIDIA(0): Assigned Display Device: CRT-0 (==) Jul 28 17:10:11 NVIDIA(0): (==) Jul 28 17:10:11 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (==) Jul 28 17:10:11 NVIDIA(0): will be used as the requested mode. (==) Jul 28 17:10:11 NVIDIA(0): (II) Jul 28 17:10:11 NVIDIA(0): Validated modes: (II) Jul 28 17:10:11 NVIDIA(0): "nvidia-auto-select" (II) Jul 28 17:10:11 NVIDIA(0): Virtual screen size determined to be 1280 x 1024 (--) Jul 28 17:10:11 NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config (--) Jul 28 17:10:11 NVIDIA(0): option (==) Jul 28 17:10:11 NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp Here is the complete /etc/X11/xorg.conf file as generated by nvidia-xconfig: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" Hor

  Read the article

• Brightness too dark or too bright

  - by YatharthROCK

  Basically, below a seemingly-arbitrary threshold (seems to be around 60%) my laptop screen is too dark to really make out much, and above that threshold it takes its maximum brightness (which is waay too bright for my eyes). This problem only occurs when I change the brightness using Windows' UI. Changing the brightness using Fn keys on my keyboard works as expected; unless the screen went into dark mode because of Windows, in which case they have no effect. This problem started occuring on my ASUS laptop very recently. My laptop has a poor battery, but I don't think that's related. What is going on? I tried resetting power plan settings, turning off adaptive brightness and restarting. I'll give any info asked for. Help required urgently...

  Read the article

• Does lighter wallpaper consumes lesser power than a Darker one

  - by Lamb

  My VAIO advised me to switch to a White Background, to reduce power consumption. But it seems contradictory to common logic. Its like saying a brighter Torch consuming less than a dimmer one. Common Logic says that, Screen is BLACK when not using any POWER, so displaying black color should not consume any power (because without powering any pixel it gives black color) Also a white screen gives me more light than a darker one, so it should use more Energy. White Wallpaper = More Light Output = More Electrical Energy Consumed Black Wallpaper = Less Light = Less Electricity Consumed My question is - Is there anything wrong with the above argument ? A Lighter Wallpaper consumes less power than a Darker one. Is it true ? If yes, Why ?

  Read the article

• TraceTune: Larger Files and History

  - by Bill Graziano

  I updated TraceTune over the weekend.  I increased the trace file upload size to 20MB.  We’ve processed over half a million rows of trace data so far and I’m confident this won’t kill the server. I added average CPU and average disk reads to the screen that lists the SQL statements in a trace file. I only added these two.  I’m pretty sure average writes isn’t that import.  I’m still thinking about average duration.  I’m trying to balance showing you what you need with a clean, simple interface.  Plus I have a way to see the averages that I describe further down. TraceTune now keeps the last 10 files that you’ve uploaded and will give you some basic details about each file. I think the last change I made is the most interesting. For each SQL statement, I show the history of that statement. You’ll see each trace file where this statement was found.  It will list the averages for CPU, reads, writes and duration.  This will quickly show you if you’re improving the performance of that query.  In my screen shot above you can that even though the execution counts are very different the averages are consistent. If you want to see what queries are consuming the most resources on your server give TraceTune a try.

  Read the article

• Switching DVI socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• VMware - Watching multiple virtual machine screens

  - by mr.b

  Hi, I don't know even if I put the question right, but here's what I'd like to accomplish. I have avoided specifying exact Vmware virtualization product here because I'm not sure which one would be most suitable for the task at hand. I am developing an application that works in local network. This application has to run on several computers at the same time, and it's important to me, as a developer and tester, to see (literally) how it behaves at all times on all computers. Is there any way to connect to screens of virtual machines deployed on ESX, ESXi, Sever 2.0, or some other product, so that I can see something like grid of screens, say 4x4 or 6x4 or whatever number of scaled screens, at the same time? Ability to interact with screens directly from grid (by double-clicking a screen, for instance, and then getting full resolution screen) would be greatly appreciated, of course. I hope that someone understood what I meant here. :)

  Read the article

• 12.10 upgrade broke brightness keys [closed]

  - by Chris Morgan

  I have been running Ubuntu (64-bit) on my HP 6710b laptop (Core 2 Duo with integrated graphics) for several years, and the backlight brightness keys have always worked. Since I upgraded to Ubuntu 12.10 earlier today, those keys do not work any more. The secondary function keys: Fn+F3: sleep; still works (and considerably faster than ever before!) Fn+F8: battery info; still works Fn+F9: reduce brightness; stopped working in 12.10 Fn+F10: increase brightness; stopped working in 12.10 It may also be worth while mentioning that X does not appear to be receiving the brightness events at all, or at least not sending them out further. (This I detected with a key logger I wrote for a Uni project, which uses X's Record extension; it is informed of the sleep and battery info keystrokes, but doesn't receive the brightness ones at all.) In the mean time, I know that I can use the Brightness & Lock settings screen to alter the brightness. (Wow! I can suddenly make my backlight darker than I could before—I can go right down to turning the backlight off, something I couldn't do before... but this model has a fairly dim screen, so I don't expect to use that much, if ever.) How can I get the brightness keys working again? This question is probably strongly related to I can't control my Brightness in HP Compaq 6710s.

  Read the article

• Antenna Aligner Part 6: Little Robots

  - by Chris George

  A week ago I took temporary ownership of a HTC Desire S so that I could start testing my app under Android. Support for Android was not in my original plan, but when Nomad added support for it recently, I starting thinking why not! So with some trepidation, I clicked the Build for Android button on the Nomad toolbar... nothing. Hmm... that's not right, I was expecting something to build. After a bit of faffing around I finally realised that I hadn't read the text on the Android setup page properly (yes that's right, RTFM!), and I needed a two-part application identifier, separated by a dot. I did this (not sure what the two part thing is all about, that one my list to investigate!) After making the change, the Android build worked and created the apk file. I uploaded this to the device and nervously ran it... it worked!!!  Well, more or less! So, there was not splash screen, but this was no surprise because I only have the iOS icons and splash screen in my project at the moment. What was more concerning was the compass update didn't seem to be working. I suspect this is a result of using an iOS specific option in the Phonegap compass watcher. Another thing to investigate. I've also just noticed that the css gradient background hasn't worked either... These issues aside, it was actually more successful than I was expecting, so happy days! Right, lets get Googling...   Next time: Preparing for submission to the App Store! :-)

  Read the article

• Multiple vulnerabilities in Thunderbird

  - by chandan

  CVE DescriptionCVSSv2 Base ScoreComponentProduct and Resolution CVE-2011-2372 Permissions, Privileges, and Access Controls vulnerability 3.5 Thunderbird Solaris 11 11/11 SRU 2 Solaris 10 Contact Support CVE-2011-2995 Denial Of Service (DoS) vulnerability 10.0 CVE-2011-2997 Denial Of Service (DoS) vulnerability 10.0 CVE-2011-2998 Denial Of Service (DoS) vulnerability 10.0 CVE-2011-2999 Permissions, Privileges, and Access Controls vulnerability 4.3 CVE-2011-3000 Improper Control of Generation of Code ('Code Injection') vulnerability 4.3 CVE-2011-3001 Permissions, Privileges, and Access Controls vulnerability 4.3 CVE-2011-3005 Denial Of Service (DoS) vulnerability 9.3 CVE-2011-3232 Improper Control of Generation of Code ('Code Injection') vulnerability 9.3 This notification describes vulnerabilities fixed in third-party components that are included in Sun's product distribution.Information about vulnerabilities affecting Oracle Sun products can be found on Oracle Critical Patch Updates and Security Alerts page.

  Read the article

• Scrollbars: A Retrospective

  - by Jason Fitzpatrick

  It’s easy to overlook the humble scrollbar, a much used but hardly thought about user interface element. This graphic compares scrollbars over the last thirty years. Some of the more modern Windows incarnations are missing but, on account of the Vista/Windows 7 scrollbar looking pretty much like a gray version of the XP one, we’ll forgive them. A full resolution version of the image is available at the link below. Scollbars Through History [via Geeks Are Sexy] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• Dual monitor setup can cause boot problem?

  - by kriszpontaz

  I have a two monitor setup, one 22" (1680x1050 res., 16:10) and another 19" (1280x1024 res. 5:4). I've installed ubuntu 11.10 beta2 x86, and the installation worked fine, the system boot was successful. I've upgraded ubuntu from the main server, and after restart, booting with the kernel 3.0.0-13, my system hangs up with a purple screen, and than nothing happens (the system boots successful with the kernel image 3.0.0-8). Nvidia current drivers not installed, but if i install it, the situation is the same. I have an Nvidia 9600GT installed. I tried to boot with one screen attached, I've tried each port, but no luck at all. With kernel image 3.0.0-8 the system successfully boots with each display attached, but the farther kernels (3.0.0-11; 3.0.0-12; ect.) all freezes, even one display, or multiple attached. I have two systems with ubuntu installed, and the other (with Ati HD 2400XT, latest closed drivers) don't have any issues like this, I wrote about. Update: The problem solved by reinstalling the operatin system, without automatically installing updates during install, with only one monitor attached. After completing installation, and clean reboot, i've installed closed nVidia drivers. After all, i found it's safe to connect another monitor to the system, it's not causing any problems. Probably the situation stays like this.

  Read the article

• andEngine dynamic sprites

  - by Blucreation

  Ive just started with andEngine the past week and i only started learning java/android 3 weeks. I can use a for loop to add multiple sprites to the screen but when i try to check collisions on them it only does it to one and not the rest. I want to be able to add a specific number for sprites made from the same texture to the scene, add collision detection to them and also make them slide across the screen (im making a game where you avoid the obstacles). My simple code: private void createobstacle(float pX, float pY) { obstacle = new AnimatedSprite(pX, pY, this.mObjTextureRegion.deepCopy(), getVertexBufferObjectManager()); obstacle.setScale(MathUtils.random(0.5f, 3f)); scene.attachChild(obstacle); } private void createobstacle(int num) { for(int i=0; i<=num; i++ ) { final float xPos = MathUtils.random(30.0f, (CAMERA_WIDTH - 30.0f)); final float yPos = MathUtils.random(30.0f, (CAMERA_HEIGHT - 30.0f)); createobstacle(xPos, yPos); } } Ive read about arrays but i cannot find any tutorials about anything im stuck with. Any help would be great!

  Read the article

• Issue with Toshiba Satellite C50 A-1JM

  - by Nathan Hawkes

  I am having some odd problems with my Toshiba laptop. For the last two days, it has not loaded past the boot screen for hours, if at all. When I force the laptop off and switch it back on, it goes to the Preparing Automatic Repair process but will not complete the process and go to the desktop. However, this only happens when the battery is plugged in. When I remove the battery and run the laptop on power, it works without issue. Would this be a battery issue (given it works without the battery) or a hard drive issue (given it won't get past the boot screen)? If neither, what would you suggest as a solution?

  Read the article

< Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >