Search Results

Search found 9062 results on 363 pages for 'big empin'.

Page 264/363 | < Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >

• PC shut downs automatically after 10-20 second. No POST screen, no beeps

  - by emzero

  I have this not-so-old computer that's not being used for a year or so. Specs: Motherboard: ASUS PN5-E SLI CPU: Intel Core2Duo E4300 RAM:2x2GB SuperTalent DDR2-800 VGA: Zogis GeForce 7950GT PSU: Vitsuba San-55-S 550w HD: No hardrives yet When I power on the computer, everything seem to start, but right away the whole system shuts down. I've removed and changed the RAM sticks, take out the VGA, everything I could think of. So what could it be causing this? The PSU? The motherboard is dead? The CPU? Any help to isolate the problem will be useful. Thanks PS: Please don't close the question, this could be helpful to anybody having a similar problem, even with different hardware. UPDATE I've removed the old thermal paste and apply a brand new one. I also cleaned every dust using a high pressure gas dust remover. Checked for bad capacitors, all of them seem ok. Opened the PSU, removed big giant dust balls, cleaned with high pressure dust remover. Still the same problem, but now it stays powered on for almost 20 seconds maybe. But no POST screen, no beeps at all, nothing. So I suspect it's a motherboard or PSU failure. Unfortunately I don't have an energy tester to test the PSU... Don't know what else to try. I don't have another 775-motherboard to test the CPU, RAM and VGA with it.

  Read the article

• Disconnect from PHP after output generated

  - by Oli

  I have a LEMP stack. Nginx sitting in front of PHP-FPM. Because some of the sites are heavy and there's OPCode caching, PHP is set up so that there are only 5 child processes running. The aim being that each child can deal with any request in less than half-a-second and then move onto the next request. One problem I've found is that if it's a big chunk of HTML that's getting sent out, and the user has a slow connection, that PHP thread stays occupied until they've finished downloading. Because of my current setup, I have a pretty unforgiving timeout inside PHP where the script is killed after 20 seconds. This is to make sure everybody gets a turn but on a slow connection, this can mean the user gets cut off with a 504 Gateway timeout. I was wondering if there was some sort of buffer solution that I could implement within or just behind Nginx that sent the request through and then... well... buffered the content into its own cache and feed that onto the client as and when they could download it. The aim being that the underlying PHP thread can be freed up. What I'm asking for doesn't have to be PHP-specific. Anything that deals with FastCGI, or even any Nginx-upstream might have a similar issue to this.

  Read the article

• load average in top and procs in vmstat

  - by Mingfei.hua

  As far as I know, the load average in top is the numbers of precess(threads) in running or uninterrupted sleep status, So it should be equal to (procs-r +1 )+ procs-b in vmstat, but in practice, this two number always have big gap. Any wrongs in my understanding, appreciate so much if some guys give me some guide. top - 05:34:50 up 1 day, 20:56, 5 users, load average: 2.83, 2.67, 1.62 Tasks: 79 total, 1 running, 78 sleeping, 0 stopped, 0 zombie Cpu(s): 6.8%us, 1.8%sy, 0.0%ni, 91.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.4%st Mem: 1758000k total, 582636k used, 1175364k free, 103932k buffers Swap: 917500k total, 0k used, 917500k free, 180868k cached procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 1182524 103784 180860 0 0 1 9 6 53 7 2 91 0 0 0 0 0 1182524 103784 180860 0 0 0 36 70 117 0 0 100 0 0 0 0 0 1182516 103784 180860 0 0 0 0 73 132 0 1 100 0 0 0 0 0 1182516 103784 180860 0 0 0 0 60 127 0 0 100 0 0 1 0 0 1182516 103784 180860 0 0 0 0 62 102 0 0 100 0 0 0 0 0 1182628 103784 180860 0 0 0 0 289 238 1 2 97 0 0 2 0 0 1152160 103784 180892 0 0 0 8 1481 2371 54 12 34 0 0 1 0 0 1182192 103784 180860 0 0 0 0 681 834 19 4 78 0 0 0 0 0 1182200 103784 180860 0 0 0 0 80 147 0 1 100 0 0 0 0 0 1182200 103784 180860 0 0 0 0 53 107 0 0 100 0 0 0 0 0 1182208 103788 180856 0 0 0 72 64 123 0 0 100 1 0

  Read the article

• Windows, why 8 GB of RAM feel like a few MB?

  - by Desmond Hume

  I'm on Windows 7 x64 with 4-core Intel i7 and 8 GB of RAM, but lately it feels like my computer's "RAM" is located solely on the hard drive. Here is what the task manager shows: The total amount of memory used by the processes in the list is just about 1 GB. And what is happening on my computer for a few days now is that one program (Cataloger.exe) is continually processing large quantities of (rather big) files, repeatedly opening and reading them for the purposes of cataloging. But it doesn't grow too much in memory and stays about that size, about 90 MB. However, the amount of data it processes in, say, 30 minutes can be measured in gigabytes. So my guess was that Windows file caching has something to do with it. And after some research on the topic, I came across this program, called RamMap, that displays detailed info on a computer's RAM. Here is the screenshot: So to me it looks like Windows keeps in RAM huge amounts of data that is no longer needed, redirecting any RAM allocation requests to the pagefile on the hard drive. Even when I close Cataloger.exe, the RamMap reports the size of the mapped file as about the same for a long time on. And it's not just this particular program. Earlier I noticed that similar slowdown occurred after some massive file operations with other programs. So it's really not an exception. Whatever it is, it slows down the computer by like 50 times. Opening a new tab in Chrome takes 20-30 seconds, opening a new program can take up to a minute. Due to the slowdown, some programs even crash. So what do you think, is the problem hiding in file caching or somewhere else? How do I solve it?

  Read the article

• Is there a program to show programs loading during the boot process in real time?

  - by Gary M. Mugford

  Hi all, There are any number of programs that will show me WHAT will run during the boot process for Windows XP. I've always been partial to Mike Lin's version but there are several others, some of which are quite possibly superior. That's not the issue. What I'd really like is a program that would load first and then would list the programs that were about to load and then check them off as the programs loaded. This isn't something I necessarily need for myself. But certain family members get click happy as soon as they see the icon they eventually want to run and end up clicking on it. THIRTY TWO TIMES in one memorable crash-inducing spasm. If there was some way for 'progress' to be shown during the loading of from the various spots Windows auto-loads from, PLUS a BIG BANNER saying "Please do not move the mouse or click on anything until done.", I think I might cut down on my early morning family support calls significantly. I've tried a variety of searches, but I couldn't find the ones that show in real time in the forest of links to programs that will show the list after the fact. Any leads? If not, do any of you who write the after-the-fact listers want to take a shot at producing a utility to do what I think would be a relatively popular utility? Best of the season to all of you and yours. Thanks in advance for any replies, GM

  Read the article

• Directory tree in a Resource without extraction...

  - by Corelgott

  Hi all, i am looking for a way to store a complete directory including sub directories in an application's resource and not have to extract it to use it. Details: We would like to use GeckoFx (Gecko as C# Component) in one of our applications. GeckoFX needs the XUL-Runner and needs to find it's folder structure We have some other data which I would not prefer to extracted to the customer's pc; At least not onto something persistent like a hdd... Getting the complete directory into the resources is not that kind of a big deal. Compress to one file and done. But not writing it to the disk to use it is something else. I have a strong dislike against temp folders and such things. Would anything like a RAM drive be possible? Some part of the RAM beeing mounted? Does something like this even exist as a lib, or would this only be possible by a device driver? Any thoughts on this? Thanks in advance! Corelgott

  Read the article

• Managing disk in a VM

  - by dst

  I'm replacing my two old rack servers with a new one that has plenty of power to take over the functionality my current servers. The server is a 4U rack mount with 16 3.5" SAS drive bays, two 2.5" bays, a Xeon E3-1230v2 CPU and 32GB of ECC RAM. My issue is the following. I would like to have a FreeBSD file server with ZFS managing disks. However, I need other VMs for e.g. a shell/git server, mail server etc. I'm wondering how to deal with the following issues: I want ZFS to fully manage the disks, so I'm not using any hardware RAID. Should I pass the SAS controller directly to the FreeBSD system as passthrough PCI? I want to maximize the reliability of the setup. On what disks should I install the hypervsor and keep server system disks? For (2) I have the option of having a RAID setup on the SAS controller and using that as system disk to store the hypervisor as well as VM images. However, this makes PCI passthrough to the file server impossible. Another option is using the two 2.5" bays. In terms of reliability how are SSDs compared to e.g. WD RE4 disks? Would it make sense to have two SSDs in software RAID as boot disks for the hypervisor or should I just go with e.g. WD RE4 disks in a software RAID setup. I also need to think about where to store the mails for the mail server, but this could be done over NFS between the VMs. BTW, this is for home use, so the load is not really that big. What I'm looking for is best practices for splitting up a server.

  Read the article

• Membership in two domains

  - by imagodei

  Hello! I would your suggestions for an effective solution for a person, who needs to access resources in two Windows domains and wants to use one computer. It's about our CEO, who has accepted a second position in another company. Accessing files and folders isn't big problem. The greatest challenge I see is that he wants to conveniently access Exchange accounts in both companies; he would like to send and receive mail in single Outlook if possible (two profiles?) There is also a challenge with calendars: he would like to have one calendar for all activities from both Exchange accounts. Creating a POP3 account for accessing second Exchange server is a last resort, because obviously there is a problem with scheduling meetings and other calendar related tasks. Forwarding and receiving all mail/tasks on primary Exchange server is inconvenient because simple replying to original sender is disabled; and also when manually changing the recepient, he will receive mail from the wrong address. We were considering Virtualisation, that is setting up an instance of virtual machine inside existing installation and then joining this virtual computer to a second domain. Then installing another MS Outlook. This would of course mean two different Outlook accounts, two different calendars, but would at least enable our CEO to access all information from a single laptop. Does anyone have any other idea? I know setting up two domains on a single computer is a no-go (without much hacking at least), but effective workarounds are appreciate. The thing I am looking here is high usage/efficiency/productivity, but also as elegant solution from the administration point of view. Thank you very much (if you managed to read this through, this is a good sign ^_^ )

  Read the article

• qsub: How can I find out what DRM middleware exactly is installed on a cluster?

  - by gojira

  I have a user account on a very big cluster. I have previous experience with Grid Engine and want to use the cluster for array jobs. The documentation tells me to use "qsub" for load balancing / submission of many jobs. Therefore I assumed this means the cluster has Grid Engine. However all my Grid Engine scripts failed to run. I checked the documentation and it is a bit weird. Now I slowly suspect that this cluster does not actually have Grid Engine, maybe it's running something called Torque (?!). The whole terminology in the man pages is a bit weird for me as a Grid Engine user, for example they talk about "bulk jobs" instead of "array jobs". There is no referral to variables on which I rely on, like SGE_TASK_ID etc. Instead they refer to variables starting with PBS_. Still, there are qsub and qstat commands. Also qsub behaves differently, apparently it is not possible to specifiy the command line parameters with bash-script comments etc. There is a documentation for the cluster system, but it does not say what the DRM middleware actually is - it refers to the entire DRM system simply as "qsub". I tried qsub --version qsub: 1.2 2010/8/17 I am not sure what I am actually running when I invoke qsub on that cluster! My question is, how can I find out if I am running Grid Engine or Torque (or whatever it is), and which version?

  Read the article

• How to interpret iozone values

  - by Henno

  I ran a test to measure my I/O IOPS on Linux: iozone -s 4g -r 2k -r 4k -r 8k -r 16k -r 32k -O -b /tmp/results.xls iozone claims that output is in operations per second yet the numbers are too big for that to be plausible. I'm observing some 320 CMDs/s maximum on vmware esx console (esxtop, then v). File size set to 4194304 KB Record Size 2 KB Record Size 4 KB Record Size 8 KB Record Size 16 KB Record Size 32 KB OPS Mode. Output is in operations per second. Command line used: iozone -s 4g -r 2k -r 4k -r 8k -r 16k -r 32k -O -b tmpresults.xls Time Resolution = 0.000001 seconds. Processor cache size set to 1024 Kbytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride KB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 4194304 2 19025 5580 27581 29848 284 198 415 1103217 1498 18541 4340 24245 25618 4194304 4 15650 21942 18962 21068 252 1198 193 976164 1677 22802 23093 21089 21232 4194304 8 11121 11638 10273 10165 247 1196 202 625020^C The test ran for 15 hours before I pressed ^C. Is that ordinary expectation for such command line (dedicated 4 drive RAID10 LUN, 10k RPM SAS drives in EMC CX300)?

  Read the article

• All commands stopped working in centos 6.5

  - by Michael

  I have made a big mistake while removing some duplicate packages as it appears to be broken. yum 1036 rpm -e --nodeps glibc-2.12-1.132.el6_5.2.x86_64 1037 rpm -e --nodeps nscd-2.12-1.132.el6_5.2.x86_64 1038 rpm -e --nodeps glibc-common-2.12-1.132.el6_5.2.x86_64 1040 rpm -e --nodeps glibc-common-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6.x86_64 glibc-headers-2.12-1.132.el6.x86_64 1041 rpm -e glibc.x86_64 1042 rpm -e --nodeps glibc.x86_64 The issue happened after doing 1042 step. None of commands work(including yum, rpm, ls, cp etc) and getting error /lib64/ld-linux-x86-64.so.2: bad ELF interpreter: No such file or directory I thought that installing glibc after removing all the current ones would help to resolve the duplicate package error :( Now I realised that it is used as the C library in the GNU system and most systems with the Linux kernel. It defines the "system calls" and other basic facilities such as open, malloc, printf, exit, etc. Is there any possible solutions other than reinstall? I have lost ssh access. Maybe anything can be done using rescue cd? Thanks

  Read the article

• What precautions should I take once defective RAM has been replaced?

  - by DustByte

  I recently discovered that my RAM is faulty (MemTest86+). I am waiting for new RAM to be sent to me.  It was through sheer luck that I discovered something was wrong. I was copying a large amount of big files and decided to verify the copies by their checksums. I discovered strange discrepancies, and noticed that checksum computation for the same file was not consistent. Now, this is the only problem I have encountered; no BSOD, no crashes, no errors. In a sense this makes me more worried than if I would have had massive crashes. I have no idea for how long the RAM has been faulty, and I have no idea if corrupt bits have been saved into files on my hard drives. I do know the RAM was fine two months ago (tested it back then). I am a user of Adobe's Lightroom and I am worried that photos or the catalog itself could carry corrupt data. Question: what should I do once new healthy RAM has been installed? Reinstall Windows (I'm using Windows 7, 64 bit)? Is there a risk that I will be presented with nasty surprises in the future if I don't? What about personal files? I have backups of some of the files but for newer files I'm not sure I can even trust the backups. It's going to take me many hard hours to manually replace files with older versions, or compare checksums.

  Read the article

• running chkdsk /F on a large mounted NTFS image file gets BSOD (Windows Vista)

  - by Citizentools

  Using ddrescue, I've created ISO files from the C: and D: drives on my Windows XP laptop's harddisk (after the laptop stopped booting and chkdsk etc. wouldn't fix it). I was able to mount the 60 GB D.iso file use OSFmount, and successfully recreated the D: drive on another laptop. The C.iso image is more problematic. ddrescue left about 3mb unrecovered of 85 GB total, after multiple passes (no big worries about this) and I'm able to mount it with OSFmount on a Windows Vista laptop. However, when I run chkdsk /F /V on the mounted drive (which was mounted as H:), I consistently get a blue screen (BSOD). CHKDSK makes it through the first three passes, including index fixing and security descriptor fixes, without errors, but triggers a BSOD when it attempts to fix the volume records or bitmap If I attempt to fix the drive by clicking on Properties-Tools-Error checking-Check Now-Automatically fix file system errors, I get an alert box reading "WIndows was unable to complete the disk check." I'd try a tool other than OSFMount, but it's the only thing I've found so far that will mount large ISO files, and it has worked for me up to now in this process. [Update 2011-11-13 18:41 EST] Just ran the same process using the original Windows XP laptop, with a different internal drive, and chkdsk worked like a champ. So the question is still interesting, but decidedly less urgent.

  Read the article

• Windows 7 Not Recognizing Camera Nor iPhone as Camera

  - by taudep

  I've been struggling with this one for a few days. I've recently upgraded an older computer to Windows 7 Home Premium. Neither my digital camera (A Canon SD1200IS) nor iPhone are ever detected as cameras, nor ever show up as accessable in Explorer. With the Canon camera, no driver is required. It's supposed to work with the default Windows 7 drivers. However, in the Control Panel's Device Manager, I'm always seeing a yellow icon next to the "Canon Digital Camera" device. I've uninstalled the device and let Windows attempt to reinstall, but it can never find a driver to install. With the iPhone, it's very similar. One big difference, though, is that iTunes can see the iPhone and back it up, etc. However, again when I go to the Device Manager, there's a yellow icon next to the iPhone. I've uninstalled iTunes, reinstalled, rebooted, deleted drivers, and let Window try to reinstall the driver, but it can never find the driver. So there seems to be some correlation that my machine can't detect cameras properly, and that it might be even a lower-level type of driver I'm struggling with. I know that USB however, does work, because I have have an external drive hooked into the machine. I've gone through the web and tried two hours worth of fixes, without success. I feel like if I can get the Canon camera detected, then the iPhone will be on it's way to being fixed too. BTW, I couldn't really find anything of use in the Event viewer. Any and all suggestions welcome.

  Read the article

• My home box as my own host?

  - by Majid

  Hi all, I have a 512 kb/s DSL service at home. I do not have a static IP but I can get one if I pay some extra to my ISP. Now, if I get the static IP, can I make my home box act as my internet host? What else do I need? Thanks P.S. I know that if at all possible, the site I make available this way might be slow, that is alright, my question is if it is possible at all. Edit: I need this for very small traffic. I am a php developer and for my projects I am often asked to provide a demo. I currently use a free hosting for this purpose but it is down most of the time and support is non-existent. So I thought to set-up my home computer as my test server. With this please note that: I will only occasionally have 'visitors' and that will be one or possibly two visitors at any time. These demos, are to showcase functionality, so no big images are served and page views will normally generate under 100KB of traffic.

  Read the article

• repo sync "CyanogenMod/android_prebuilt" size and resume capability.?

  - by james

  I'm downloading CyanogenMod-10.1 source on a low speed broadband. About 4GB of source is downloaded . In that 4GB, there is a big project "CyanogenMod/android_frameworks_base" which alone took 1GB of download without any interruption. Ok now, after 4GB of download, my internet got disconnected and I had to stop (ctrl + z) repo sync while it was downloading the project "CyanogenMod/android_prebuilt". Before I stopped repo sync the android_prebuilt got downloaded till 250MB and is at 42percent. I checked the working folder and there is a file "tmp_pack_df5CKb" of size 250MB in the path "$WORKING_DIR/.repo/projects/prebuilt.git/objects/pack/" . Then I restarted repo sync and it was downloading the android_prebuilt project. But I'm not sure if it was downloading from start or resuming from 250MB. While downloading this time , the previous "tmp_pack_df5CKb" isn't deleted and the content is being downloaded to a new file "tmp_pack_HPfvFG". I heard repo sync cannot be resumed for a project. But here, since the previous file isn't deleted I want to ask if android_prebuilt is resuming or downloading from start again? Now that my high speed internet is over (current speed 256kbps), I'm not sure if I can download the remaining ~4GB if single project is in size 500 MB.

  Read the article

• Getting Dell E6320 with I7 to work with 3 monitors at 1920x1080p x 3

  - by MadBoy

  I want to buy Dell E6320 which comes with Intel Core I7-2620M (2.70GHz, 4MB cache, Dual Core) with Intel HD Graphics 3000. Laptop will come with docking station. I want to connect 3 monitors to that docking station so that working at home would give me some additional boost. Docking station will allow me to connect only 2 monitors so I'm looking at following other options: Matrox TRIPLEHEAD2GO DIGITAL Edition or TRIPLEHEAD2GO DP Edition. But reading Matrox Support Page intel GPU can't run the highest resolution with 3 monitors connected, it even gets worse since it seems monitors would have to be able to work at 50hz. Also I'm not sure but it seems that Matrox doesn't split the monitors as 3 separate monitors but simply as one big space (which is a bit opposite to what I need) Buy 2 or maybe just 1 USB based monitor but it would also mean having 1 or 2 different monitors then the main one, unless I buy 3 USB based monitors which would mean more money to spend. Also I found only couple of models and most of them require USB 3.0 and no other cables to plug in (nice but costly - couldn't find decent monitor with only USB for sending signal and having power connected normally) . But docking station has only one USB 3.0 port. Can I use hub and still get it to work? Find some converters from Digital to USB (I think DisplayLink does some?) Buy different laptop but what kind? I need it to be I7, small (13"), fast and lightweight. At same time it requires docking station that I can use at home to connect 3 external monitors. Some other suggested solution... Edit: I need 3 monitors for work in terms of coding in Visual Studio or having word/excel/outlook open. Nothing fancy. Maybe some movie once in a while.

  Read the article

• Web page layout becomes broken when moved to live.

  - by Moses

  I want to preface my question with the fact that I'm only a front-end web developer, so please excuse my gross lack of knowledge in this area. My company has three webservers: one for development (IIS v5), one for staging (IIS v5), and one for live deployment (IIS v6). Staging is an exact mirror of live. When I compare the staging and live web pages side by side in Firefox (3.6), the pages are identical. However, when I compare the staging and live pages with Internet Explorer (8), there are major differences... In staging, the squares for bulleted lists are small. In live, the squares are big. In staging, the borders for tables are thick. In live, the borders are thin. In staging, an ASP generated image is the proper height. In live, the image is cropped at the bottom by about 10px. In the end, the layout on live became broken because of these tiny differences, but why? Does the fact that live is on IIS 6 and staging is on IIS 5 account for the small variance in display? And is there any way I can change this server side? Also, is there any reason why Firefox displays both correctly and IE displays both incorrectly?

  Read the article

• Cannot load from raid with grub

  - by Andrew Answer

  I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... This is my partial fdisk -l output: Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Anybody can resolve this issue? I have big headache with this.

  Read the article

• Is there a way in Windows 7 to disable "journaling"?

  - by Psycogeek

  C:\$extend\$Usn.Jrnl:$J:$data Here is a picture finally. The large strip in the center of the top band is the largest chunk, in the other, grey areas are the various clusters with it. On the right, the big long grey line is $logfile (not paging), and it is 63&nbsb;MB. Paging, 500&nbsb;MB is the dark cyan chunk, next to the yellow MFTres in the inner rings.. The disk was defragged so they could be seen easier. Not all clusters of this type of file are tagged, but the idea is there. The disk is 4k clusters, now about 12 GB size. Each cute little block in the picture is .81 MB and represents 207 clusters. The dkGreen section, is mostly the whole Winsxs pile, also interesting when they keep telling us it doesn't take much disk space. Wikipedia suggests that in previous NT systems "USN journaling" would be turned on when enabled (assumes it could also be turned off?). What aspects, services, or program is working on putting that stuff all over the disk which is known by $jrnl$ type clusters, even if it is not actual USN journaling? Is it possible in a Windows 7 system to completly disable the journaling, and what would be the ramifications of that? On a Windows XP NTFS system, I do not recall seeing the quantity of disk clusters used with these $jrnl$ names, so I do not recall this being necessary in this quantity for an NTFS file system itself? I understand that it would not be there, if it did not have a useful function :-) Information about how wonderful is fine, if that information will help track down what parts of the system create and use it. Change Journals states: Change journals are also needed to recover file system indexing Hmm, that might explain some of them, or why it was left on the disk. A crash while background indexing?

  Read the article

• Few questions about a good projector on my PC and tv?

  - by jasondavis

  I have always wanted a projector for my tv, satelite, cable, and even PC in a spare bedroom. Well it's more of a home office that I spend most my time in and the catch here is it is a small room. Room is only the standard 8foot tall. Room is about 13 feet wide on the wall where I would like to mount the project and the wall where the screen would be for it. So only about 13 feet away from projector to screen. I would like to know... 1) From experience or knowledge what would be a good projector I could hook up to my satelite box and also my PC? Cheaper is better in this case but I would still like the best image for my buck and something reliable. There is no sunlight in the room either to worry about. 2) From that distance of about 12-13 feet away, how big of a clear picture could I expect? 3) What kind of cables would I need to purchase and run through my attic to my cable/satelite receiver box as well as my PC? 4) These cables in question 3 would most likely need to be a good 15-20feet in length to reach, would I need anything special for that to work at those distances?

  Read the article

• How do I prevent spawning of zombie-like apache2 processes on Dreamhost VPS?

  - by Jonathan Hayward

  I have had a website for months or longer on a DreamHost VPS, and I have had vague memories on, in initial setup, having to turn off some customized Apache under /dh to get a standard Apache 2.x to work with. Things have been going along on an even keel, when I started making some changes lately and I found that when I tried to bounce Apache (/usr/sbin/apachectl restart), it couldn't bind to port 80, and my site had been converted from a big literature site to a small parking site. I tried to see what was listening on 80, and it was a DreamHost-customized Apache that had spawned. I killed all of them, restarted Apache, and changed the parent directory under /dh to mode 000. That was a day or two ago. I was bouncing Apache again in trying to get a new site to load under HTTPS, and I found that once again DreamHost's apache had spawned, from the directory I set to mode 000, and once again converted my site to a parking page. I renamed the directory, but I am very skeptical of whether I have permanently killed the DreamHost-customized Apache. Besides duct tape options like a crontab to kill and delete each minute, how can I permanently turn off the Apache processes that are spawning from a location under /dh and interfering with standard Apache? What should I be doing that I am not? Can DreamHost's technical support stop the interference? Thanks,

  Read the article

• How to connect a Win XP PC and Win 7 PC with a Linksys WRT54G Router to a PPPOE connection ?

  - by ChristianM

  I have two PCs and a WRT56G Router. My provider is a PPPOE connection (username and password). I can connect my Windows 7 easily. Even if I choose Auto or PPPOE on the router's configuration. Maybe because this one had the connection in the first place with the username and password set up. But I can't connect the Windows XP PC. Actually it does connect in a way, but it receives and sents just a few packages. I can actually see in My Network Places how many packages does the Gateway make and it's a big difference. And it won't open any page. How should I set up the router so I can give enough bandwith to the Windows XP PC ? I've seen another problem that I forgot to mention. The router can't connect with the pppoe settings. I don't know why, but with Auto DHCP setting and my Windows 7 connected with pppoe settings works. EDIT2: I've installed Win 7 on the other PC so I won't have any problem of compatibility betwen them. But I still can't connect the router with PPPOE settings to the internet. It looks like this: http://img641.imageshack.us/img641/9780/capturefba.png If you need any other screens or info, please tell me.

  Read the article

• Python not Working in Vim

  - by jdg

  I have a new install of VIM from the automatic windows installer: gvim73_46.exe I have Python 2.7 (32 bit) installed. If I open gvim, and type: :set python? I get E518: Unknown option. If I try typing: :python 'hello' Vim crashes. What could be wrong? Here are the contents of :version in case they are helpful, although python is installed, and it is using Python 2.7. I also checked, and C:\Windows\System32\python27.dll is where it should be... I am really lost here. Does anyone have any ideas as to what is going wrong? VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Oct 27 2010 17:59:02) MS-Windows 32-bit GUI version with OLE support Included patches: 1-46 Compiled by Bram@KIBAALE Big version with GUI. Features included (+) or not (-): +arabic +autocmd +balloon_eval +browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con_gui +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +gettext/dyn -hangul_input +iconv/dyn +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse +mouseshape +multi_byte_ime/dyn +multi_lang -mzscheme +netbeans_intg +ole -osfiletype +path_extra +perl/dyn +persistent_undo -postscript +printer -profile +python/dyn +python3/dyn +quickfix +reltime +rightleft +ruby/dyn +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white +tcl/dyn -tgetent -termresponse +textobjects +title +toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -xfontset -xim -xterm_save +xpm_w32 system vimrc file: "$VIM\vimrc" user vimrc file: "$HOME_vimrc" 2nd user vimrc file: "$VIM_vimrc" user exrc file: "$HOME_exrc" 2nd user exrc file: "$VIM_exrc" system gvimrc file: "$VIM\gvimrc" user gvimrc file: "$HOME_gvimrc" 2nd user gvimrc file: "$VIM_gvimrc" system menu file: "$VIMRUNTIME\menu.vim" Compilation: cl -c /W3 /nologo -I. -Iproto -DHAVE_PATHDEF -DWIN32 -DFEAT_CSCOPE -DFEAT_NETBEANS_INTG -DFEAT_XPM_W32 -DWINVER=0x0400 -D_WIN32_WINNT=0x0400 /Fo.\ObjGOLYHTR/ /Ox /GL -DNDEBUG /Zl /MT -DFEAT_OLE -DFEAT_MBYTE_IME -DDYNAMIC_IME -DFEAT_GUI_W32 -DDYNAMIC_ICONV -DDYNAMIC_GETTEXT -DFEAT_TCL -DDYNAMIC_TCL -DDYNAMIC_TCL_DLL=\"tcl83.dll\" -DDYNAMIC_TCL_VER=\"8.3\" -DFEAT_PYTHON -DDYNAMIC_PYTHON -DDYNAMIC_PYTHON_DLL=\"python27.dll\" -DFEAT_PYTHON3 -DDYNAMIC_PYTHON3 -DDYNAMIC_PYTHON3_DLL=\"python31.dll\" -DFEAT_PERL -DDYNAMIC_PERL -DDYNAMIC_PERL_DLL=\"perl512.dll\" -DFEAT_RUBY -DDYNAMIC_RUBY -DDYNAMIC_RUBY_VER=191 -DDYNAMIC_RUBY_DLL=\"msvcrt-ruby191.dll\" -DFEAT_BIG /Fd.\ObjGOLYHTR/ /Zi Linking: link /RELEASE /nologo /subsystem:windows /LTCG:STATUS oldnames.lib kernel32.lib advapi32.lib shell32.lib gdi32.lib comdlg32.lib ole32.lib uuid.lib /machine:i386 /nodefaultlib gdi32.lib version.lib winspool.lib comctl32.lib advapi32.lib shell32.lib /machine:i386 /nodefaultlib libcmt.lib oleaut32.lib user32.lib /nodefaultlib:python27.lib /nodefaultlib:python31.lib e:\tcl\lib\tclstub83.lib WSock32.lib e:\xpm\lib\libXpm.lib /PDB:gvim.pdb -debug

  Read the article

• Including email, IMs, configs, etc. in documentation or notes

  - by Jason Antman

  The shop I work in is pretty laid-back. We're on a documentation kick, only because historically we've been very bad with it. We do a lot of our brainstorming in face-to-face meetings, and also do a lot of communication via IM in addition to email. While I'm usually pretty good about documentation and keeping copious lab notes, I just finished a build of a host and spent hours searching through IMs, emails, files on my workstation, etc. to pull out anything I missed in my lab notes, which formed a large amount of the basis for the internal documentation. Does anyone have any thoughts on, aside from manually saving things to a project directory, managing various data sources (especially email and IM) and tracking them on project basis? Ideally, I'd like an easy way to put copies of emails, IM logs, etc. into a project-specific directory on my workstation and then just have a cron job that syncs that up with a shared folder. This isn't really a candidate for anything more advanced, as the bulk of the data will be copies of configs, code, etc. Here are the big restrictions: Email is via a centralized Zimbra install, so nothing can happen server-side. My workstation is Linux. Aside from writing Pidgin and Thunderbird plugins that let me tag chats and emails as belonging to a project, and then copy them to the appropriate place... any thoughts? Suggestions? Thanks, Jason

  Read the article

< Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >