Search Results

Search found 8821 results on 353 pages for 'core duo'.

Page 265/353 | < Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >

• asus n550jv audio problem: no sound from notebook' speakers

  - by skywalker

  Ubuntu 13.10. The problem is: the internal speakers don't work. I have no problem when I'm using the headphones. There is no hardware issue since in windows 8 everything works perfectly(external subwoofer included). I'm trying to modify /etc/modprobe.d/alsa-base.conf but I can't find the correct model to put into: options snd-hda-intel model= The file HD-Audio-Models.txt doesn't contain the model for ALC668. Some info: :~sudo aplay -l **** List of PLAYBACK Hardware Devices **** card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC668 Analog [ALC668 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 :~$ sudo lspci -v | grep -A7 -i "audio" 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) Subsystem: Intel Corporation Device 2010 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f7a14000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Kernel driver in use: snd_hda_intel -- 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04) Subsystem: ASUSTeK Computer Inc. Device 11cd Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel PS info :~$ amixer -c 0 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] :~$ pacmd dump-volumes Welcome to PulseAudio! Use "help" for usage information. Sink 0: reference = 0: 76% 1: 76%, real = 0: 76% 1: 76%, soft = 0: 100% 1: 100%, current_hw = 0: 76% 1: 76%, save = yes Input 8: volume = 0: 100% 1: 100%, reference_ratio = 0: 100% 1: 100%, real_ratio = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, volume_factor = 0: 100% 1: 100%, volume_factor_sink = 0: 100% 1: 100%, save = no Source 0: reference = 0: 100% 1: 100%, real = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, current_hw = 0: 100% 1: 100%, save = no Source 1: reference = 0: 16% 1: 16%, real = 0: 16% 1: 16%, soft = 0: 100% 1: 100%, current_hw = 0: 16% 1: 16%, save = yes

  Read the article

• The challenge of giving a positive No

  - by MarkPearl

  I find it ironic that the more I am involved in the software industry, the more apparent it becomes that soft skills are just as if not more important than the technical abilities of a developer. One of the biggest challenges I have faced in my career is in managing client expectations to what one can deliver and being able to work with multiple clients. If I look at where things commonly go pear shaped, one area features a lot is where I should have said "No" to a request, but because of the way the request was made I ended up saying yes. Time and time again this has caused immense pain. Thus, when I saw on Amazon that they had a book titled "The power of a positive no" by William Ury I had to buy it and read it. In William's book he explains an approach to saying No that while extremely simple does change the way a No is presented. In essence he talks of a pattern the Yes! > No > Yes? Pattern. 1. Yes! -> positively and concretely describing your core interests and values 2. No. -> explicitly link your no to this YES! 3. Yes? -> suggest another positive outcome or agreement to the other person Let me explain how I understood it. If you are working on a really important project and someone asks you to do add a quick feature to another project, your Yes! would be to the more important project, which would mean a No to the quick feature, and an option for your Yes? may be an alternative time when you can look at it.. An example of an appropriate response would be... It is really important that I keep to the commitment that I made to this customer to finish his project on time so I cannot work on your feature right now but I am available to help you in a weeks time. William then goes on to explain the type of behaviour a person may display when the no is received. He illustrates this with a diagram called the curve of acceptance. William points out that if you are aware of the type of behaviour you can expect it empowers you to stay true to your no. Personally I think reading and having an understanding of the “soft” side of things like saying no is invaluable to a developer.

  Read the article

• Lesser Known NHibernate Session Methods

  - by Ricardo Peres

  The NHibernate ISession, the core of NHibernate usage, has some methods which are quite misunderstood and underused, to name a few, Merge, Persist, Replicate and SaveOrUpdateCopy. Their purpose is: Merge: copies properties from a transient entity to an eventually loaded entity with the same id in the first level cache; if there is no loaded entity with the same id, one will be loaded and placed in the first level cache first; if using version, the transient entity must have the same version as in the database; Persist: similar to Save or SaveOrUpdate, attaches a maybe new entity to the session, but does not generate an INSERT or UPDATE immediately and thus the entity does not get a database-generated id, it will only get it at flush time; Replicate: copies an instance from one session to another session, perhaps from a different session factory; SaveOrUpdateCopy: attaches a transient entity to the session and tries to save it. Here are some samples of its use. ISession session = ...; AuthorDetails existingDetails = session.Get<AuthorDetails>(1); //loads an entity and places it in the first level cache AuthorDetails detachedDetails = new AuthorDetails { ID = existingDetails.ID, Name = "Changed Name" }; //a detached entity with the same ID as the existing one Object mergedDetails = session.Merge(detachedDetails); //merges the Name property from the detached entity into the existing one; the detached entity does not get attached session.Flush(); //saves the existingDetails entity, since it is now dirty, due to the change in the Name property AuthorDetails details = ...; ISession session = ...; session.Persist(details); //details.ID is still 0 session.Flush(); //saves the details entity now and fetches its id ISessionFactory factory1 = ...; ISessionFactory factory2 = ...; ISession session1 = factory1.OpenSession(); ISession session2 = factory2.OpenSession(); AuthorDetails existingDetails = session1.Get<AuthorDetails>(1); //loads an entity session2.Replicate(existingDetails, ReplicationMode.Overwrite); //saves it into another session, overwriting any possibly existing one with the same id; other options are Ignore, where any existing record with the same id is left untouched, Exception, where an exception is thrown if there is a record with the same id and LatestVersion, where the latest version wins SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.brushes.CSharp.aliases = ['c#', 'c-sharp', 'csharp']; SyntaxHighlighter.all();

  Read the article

• Getting Started with Kinect for Windows.

  - by Vishal

  Hello folks,      Recently I got involved in a project for building a demo application for one of our customers with Kinect for Windows. Yes, something similar what Tom Cruise did in the movie Minority Report. Waving arms, moving stuff around, swipes, speech recognition, manipulating computer screens without even touching it. Pretty cool!!! The idea in the movie showed us how technology would be after 50 years from that day.   Minority Report Movie clip.           Well, that 50 years of time frame got squeezed and recently on Feb 1st 2012, Microsoft released the official Kinect for Windows SDK. That’s just 10 years from the movie release. Although, the product is in it early stages but with developer creativity and continuously improving hardware, those features shown in the movie are not very far away from becoming a reality. Soon after releasing the SDK, Microsoft again announced in March the release of its new Kinect for Windows SDK version 1.5 which is coming out in sometime May. More history about Kinect. Anyways, so for a newbie with Kinect, where would you start. Here is what I would suggest you can do. Watch the Kinect for Windows Quick start Series by Den Fernandez. Download the Kinect for Windows SDK and start playing around with the demos in it. It also comes with some basic Kinect documentation. Coding4Fun Kinect Projects | Lot many more videos and open sources projects information. Kinect for Windows Session at Techdays NL demo by Jesus Rodriguez. Book: Beginning Kinect Programming with the Microsoft Kinect SDK.  | I did go through few of the chapters in this book and based on that, it does talk deeply about core Kinect concepts but in very easy to understand way. I would definitely suggest this book for any Kinect developers. I liked the way it explained the Gestures recognition in Chapter 6. Buy your Kinect device from either Amazon or NewEgg. You will get it cheaper then buying it from Microsoft Store. Personally, I love Newegg.com as I never had any order related or shipping issues with them. I always hate developing UI application but well, you would need to get your hands dirty with WPF too in order to work with Kinect. So get started with WPF concepts too. I will keep adding stuff to the list once I come across them but so far the above list would definitely get you started building your first Kinect apps. Till then Happy Kinecting…!!!!! Thanks, Vishal Mody

  Read the article

• WebLogic Server Weekly for March 26th, 2012: WLS 1211 Update, Java 7 Certification, Galleria, WebLogic for DBAs, REST and Enterprise Architecture, Singleton Services

  - by Steve Button

  WebLogic Server 12c Certified with Java 7 for Production Use WebLogic Server 12c (12.1.1) has been certified with JDK 7 for development usage since December and we have now completed JDK 7 certification for use with production systems. In doing so, we have updated the WebLogic Server 12c (12.1.1) distributions incorporating fixes associated with JDK 7 support as well as some bundled patches that address several issues that have been discovered since the initial release. These updated distributions are available for download from OTN and will be beneficial for all WebLogic Server 12c (12.1.1) users in general. What's New Release Notes Download Here! Updated Oracle WebLogic Server 12.1.1.0 distribution Never one to miss a trick, Markus Eisele was one of the first to notice the WebLogic Server 12c update and post a blog about it. Sources told me that as of Friday last week you have an updated version of WebLogic Server 12c on OTN. http://blog.eisele.net/2012/03/updated-oracle-weblogic-server-12110.html Using WebLogic Server 12c with Java 7 - Video To illustrate the use of Java 7 with WebLogic Server 12c, I put together a screen cam showing the creation of a domain using Java 7 and then build and deploy a simple web application that uses Java 7 syntax to show it working. Ireland OUG Presentation: WebLogic for DBAs Simon Haslam posted his slides from a presentation he gave Dublin on 21/3/12 at the OUG Ireland conference. In this presentation, he explains the core concepts and ideas behind WebLogic Server, walks through an installation and offers some tips and common gotcha's to avoid. Simon also covers some aspects of installing and use Enterprise Manager 12c. Note: I usually install the JVM and use the generic .jar installer rather than using an installer bundled with a JVM. http://www.slideshare.net/Veriton/weblogic-for-dbas-10h Slightly Retro: Jeff West on Enterprise Architecure and REST In this weeks flashback, we look at Jeff West's blog from early 2011 where he provides some thoughtful opinions on enterprise architecture and innovation, then jumps into his views on REST. After I progressed in my career and did more team-leading and architecture type roles I was ‘educated’ on what it meant to have Asynchronous and Long-Running processes as part of your Enterprise Application architecture. If I had a synchronous process then I needed a thread available to service the request and then provide the response. https://blogs.oracle.com/jeffwest/entry/weblogic_integration_wli_web_services_and_soap_and_rest_part_1 Starting Managed Servers without an Administration Server using Node Manager and WLST Blogger weblogic-tips shows how to start a managed server without going through the Administration Server, using the Node Manager and WLST. Connect WLST to a Node Manager by entering the nmConnect command. http://www.weblogic-tips.com/2012/02/18/starting-managed-servers-without-an-administration-server-using-node-manager-and-wlst/ Using WebLogic Server Singleton Services WebLogic Server has supported the notion of a Singleton Service for a number of releases, in which WebLogic Server will maintain a single instance of a configured singleton service on one managed server within a cluster. This blog demonstrates how the singleton service can be accessed and used from applications deployed on the cluster. http://buttso.blogspot.com.au/2012/03/weblogic-server-singleton-services.html

  Read the article

• Bluetooth firmware problem in Ubuntu 13.04

  - by chanzerre

  I have a [Dell Inspiron][1] 15R 5520 laptop. Bluetooth is not working at all. rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no dmesg|grep -i bluetooth gives [ 13.644428] Bluetooth: Core ver 2.16 [ 13.644445] Bluetooth: HCI device and connection manager initialized [ 13.644453] Bluetooth: HCI socket layer initialized [ 13.644455] Bluetooth: L2CAP socket layer initialized [ 13.644461] Bluetooth: SCO socket layer initialized [ 15.861363] Bluetooth: hci0 command 0x1003 tx timeout [ 15.903443] Bluetooth: can't load firmware, may not work correctly [ 17.332535] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.332538] Bluetooth: BNEP filters: protocol multicast [ 17.332544] Bluetooth: BNEP socket layer initialized [ 17.393768] Bluetooth: RFCOMM TTY layer initialized [ 17.393781] Bluetooth: RFCOMM socket layer initialized [ 17.393783] Bluetooth: RFCOMM ver 1.11 hciconfig gives hci0: Type: BR/EDR Bus: USB BD Address: E0:06:E6:D5:DB:46 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN ISCAN RX bytes:687 acl:0 sco:0 events:56 errors:0 TX bytes:2024 acl:0 sco:0 commands:52 errors:0 I have visited the site http://wireless.kernel.org/en/users/Drivers/b43 and according to it lspci -vnn -d 14e4: gives 08:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at c1500000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: wl So I got my PCI-ID as 14e4:4365 which it says is not supported. The alternative is wl. What should I do? My Wi-Fi is working normally without any problems, but Bluetooth is not working. sudo dpkg -i wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb gives following error (Reading database ... 208543 files and directories currently installed.) Unpacking wireless-bcm43142-dkms (from wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb) ... Setting up wireless-bcm43142-dkms (6.20.55.19-1) ... Loading new wireless-bcm43142-6.20.55.19 DKMS files... Building only for 3.8.0-23-generic Building initial module for 3.8.0-23-generic Traceback (most recent call last): File "/usr/share/apport/package-hooks/dkms_packages.py", line 22, in <module> import apport ImportError: No module named apport Error! Bad return status for module build on kernel: 3.8.0-23-generic (x86_64) Consult /var/lib/dkms/wireless-bcm43142/6.20.55.19/build/make.log for more information.

  Read the article

• Getting WLAN on my Laptop to work (Medion MD98300)

  - by Anand Böhmer

  Dear Ubuntu Community, I am having difficulties to get the WLAN Adapter on my Medion 98300 Laptop to work. The WLAN Card seems to be connected through an internal USB Interface and the Card itself had shown up as a wirelles Network while installing Ubuntu. I have tried a few things earlier, but none of my google reasearches have brought me to a working solution... I am quite new to the Linux System and only knoew a couple of terminal commands so far, so I probably have missed out on a few possible solutions. Maybe you can help me? Thank you very much in advance! A fre minimal technical Details: AMD Turion 64 X2 Dual-Core Mobile Technolgie TL-50 NVIDIA GeForce Go 6150 SanDisk 64GB SSD 2GB RAM DDR2 667 nForce Chipset (I forgt the Version, but deductable from the GPU I guess) WiFi: ZyDAS ZD1211B 802.11g Thank's a lot again! :) UPDATE: I tried around myself a little and found a guide on the Linux Mint forums that helped! I already had tried to install the linux backport modules etc. What I finally did was update the linux firmware and run the following command: echo "options acer_wmi wirelles=1" sudo tee /etc/modprobe.d/acer_wmi.conf and rebooted now I found and could connect to networks, but unfortunately I found, that the link quality was very bad, around 40 to 50. Eventhough my Router is running at high power and is only 6 Meters away! I then switched a few channels, but that did not improve much. Before, under Windows, I had a very good link quality and had the entire 16mbit/s internet connection at disposal, now I can only get about 3-5Mbit/s. better then nothing, but still pretty bad! The "TX power" is fixed on 20dBm and iwconfig says, that the "Power Management" is off... Maybe the power of the module is set too low?... UPDATE2: I figured that 20dBm is a normal power output. I even tried to change the power using iwconfig wlan0 txpower INTEGERHERE but, obviously my "Card" does not support more then 20. More would probably be illegal as well, so I won't even use more then 20. I guess that I will have to figure out a way, or maybe just switch cards. Are the Mailboard-USB-Connectors on a laptop of the same property as the standard external ones? If so, I could simply solder a micro Wirelless N Adapter onto the board :)

  Read the article

• Gradle for NetBeans RCP

  - by Geertjan

  Start with the NetBeans Paint Application and do the following to build it via Gradle (i.e., no Gradle/NetBeans plugin is needed for the following steps), assuming you've set up Gradle. Do everything below in the Files or Favorites window, not in the Projects window. In the application directory "Paint Application". Create a file named "settings.gradle", with this content: include 'ColorChooser', 'Paint' Create another file in the same location, named "build.gradle", with this content: subprojects { apply plugin: "announce" apply plugin: "java" sourceSets { main { java { srcDir 'src' } resources { srcDir 'src' } } } } In the module directory "Paint". Create a file named "build.gradle", with this content: dependencies { compile fileTree("$rootDir/build/public-package-jars").matching { include '**/*.jar' } } task show << { configurations.compile.each { dep -> println "$dep ${dep.isFile()}" } } Note: The above is a temporary solution, as you can see, the expectation is that the JARs are in the 'build/public-packages-jars' folder, which assumes an Ant build has been done prior to the Gradle build. Now run 'gradle classes' in the "Paint Application" folder and everything will compile correctly. So, this is how the Paint Application now looks: Preferable to the second 'build.gradle' would be this, which uses the JARs found in the NetBeans Platform... netbeansHome = '/home/geertjan/netbeans-dev-201111110600' dependencies { compile files("$rootDir/ColorChooser/release/modules/ext/ColorChooser.jar") def projectXml = new XmlParser().parse("nbproject/project.xml") projectXml.configuration.data."module-dependencies".dependency."code-name-base".each { if (it.text().equals('org.openide.filesystems')) { def dep = "$netbeansHome/platform/core/"+it.text().replace('.','-')+'.jar' compile files(dep) } else if (it.text().equals('org.openide.util.lookup') || it.text().equals('org.openide.util')) { def dep = "$netbeansHome/platform/lib/"+it.text().replace('.','-')+'.jar' compile files(dep) } else { def dep = "$netbeansHome/platform/modules/"+it.text().replace('.','-')+'.jar' compile files(dep) } } } task show << { configurations.compile.each { dep -> println "$dep ${dep.isFile()}" } } However, when you run 'gradle classes' with the above, you get an error like this: geertjan@geertjan:~/NetBeansProjects/PaintApp1/Paint$ gradle classes :Paint:compileJava [ant:javac] Note: Attempting to workaround javac bug #6512707 [ant:javac] [ant:javac] [ant:javac] An annotation processor threw an uncaught exception. [ant:javac] Consult the following stack trace for details. [ant:javac] java.lang.NullPointerException [ant:javac] at com.sun.tools.javac.util.DefaultFileManager.getFileForOutput(DefaultFileManager.java:1058) No idea why the above happens, still trying to figure it out. Once the above works, we can start figuring out how to use the NetBeans Maven repo instead and then the user of the plugin will be able to select whether to use local JARs or JARs from the NetBeans Maven repo. Many thanks to Hans Dockter who put the above together with me today, via Skype!

  Read the article

• Additional new material WebLogic Community

  - by JuergenKress

  Oracle Cloud Application Foundation 12c Helps Customers Deliver Next-Generation Applications on a Mission-Critical Cloud Platform In a recent online event, Oracle and industry speakers introduced Oracle Cloud Application Foundation 12c, including Oracle WebLogic 12.1.2 and Oracle Coherence 12.1.2.  Read More Team Spotlight: Mike Lehmann, Vice President of Product Management Meet the team behind Oracle Fusion Middleware. In this edition, we speak to Mike Lehmann, Oracle’s vice president of product management for Oracle Cloud Application Foundation, Oracle WebLogic Server, Oracle Coherence, Java Cloud Services, and Java Platform, Enterprise Edition. Read More New and Free: Learn Oracle Application Development Framework Mobile Online at Your Convenience Are you ready to go mobile? Check out this new tutorial from Oracle’s ADF Academy - Developing Applications with Oracle Application Development Framework Mobile. New: Oracle JDeveloper 12c and Oracle Application Development Framework 12c Announcing Oracle JDeveloper 12c and Oracle Application Development Framework 12c. New capabilities include HTML5, better Maven support, Git support, new Oracle ADF Faces components, improved REST support, Enterprise JavaBeans/Java Persistence API, and the latest support for Oracle WebLogic Server 12.1.2. Get more details and download. New: Oracle Enterprise Pack for Eclipse 12c The best Eclipse-based tools for Oracle WebLogic and Oracle Coherence continue to get better. Check out the latest Oracle WebLogic and Oracle Coherence support, improved Oracle Application Development Framework support, Maven, and more. Register: Oracle WebLogic Devcast Series Join us for the upcoming Oracle WebLogic Devcast webcast. Oracle GlassFish Server 3.1.2 and 2.1.1 updates  & An Overview of JSON-P & Comprehensive Free Java EE 6 Video Tutorial! Java ME Embedded 3.3 and Java ME Software Development Kit (SDK) 3.3 Now Available - Optimized for microcontrollers and other resource-constrained devices, this release reduces "core plumbing" for an app, and includes more information about memory and network usage critical for low-power apps. JDK 8 Early Access Releases now available JDK 8 Early Access Developer Documentation - Get the latest documentation changes to the Java Developer Guides and the Java Tutorials - Blog NetBeans IDE 7.4 Beta - This release extends HTML5 features to Java EE and PHP application development, introduces new support for Hybrid HTML5 development on Android and iOS platforms, and preview support for JDK 8. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• How i can fix " E: Internal Error, No file name for libc6 "

  - by SMAOUH

  Hello all please i need your help to fix this problem i have 2 broken packages system and i can't reinstall them or make any other option : update , upgrade , install & remove app .... Ubuntu 12.04.3 I have not found any solutions please help me sudo apt-get install -f smaouh@Linux:~$ sudo apt-get install -f [sudo] password for smaouh: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libopenal1 libpam-winbind libao-common gnome-exe-thumbnailer libqca2-plugin-ossl gir1.2-champlain-0.12 libmagickcore4 libmagickwand4 libmagickcore4-extra libcapi20-3 python-unidecode libopenal-data liblqr-1-0 gir1.2-gtkchamplain-0.12 unixodbc wine-gecko2.21 libchamplain-0.12-0 python-glade2 imagemagick-common libosmesa6 oss-compat gimp-help-common esound-common gimp-help-en libmpg123-0 ttf-mscorefonts-installer imagemagick winbind libodbc1 fonts-droid fonts-unfonts-core libchamplain-gtk-0.12-0 libclutter-gtk-1.0-0 gir1.2-gtkclutter-1.0 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 386 not upgraded. 4 not fully installed or removed. After this operation, 0B of additional disk space will be used. dpkg: error processing libc6 (--configure): libc6:amd64 2.15-0ubuntu10.5 cannot be configured because libc6:i386 is in a different version (2.15-0ubuntu10.4) dpkg: dependency problems prevent configuration of libc-dev-bin: libc-dev-bin depends on libc6 (>> 2.15); however: Package libc6 is not configured yet. libc-dev-bin depends on libc6 (<< 2.16); however: Package libc6 is not configured yet. dpkg: error processing libc-dev-bin (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libc6-dev: libc6-dev depends on libc6 (= 2.15-0ubuntu10.5); however: Package libc6 is not configured yet. libc6-dev depends on libc-dev-bin (= 2.15-0ubuntu10.5); however: Package libc-dev-bin is not configured yet. dpkg: error processing libc6-dev (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libc6-i386: libc6-i386 depends on libc6 (= 2.15-0ubuntu10.5); however: Package libc6 is not configured yet. dpkg: error processing libc6-i386 (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already Errors were encountered while processing: libc6 libc-dev-bin libc6-dev libc6-i386 E: Sub-process /usr/bin/dpkg returned an error code (1) smaouh@Linux:~$

  Read the article

• Developing for 2005 using VS2008!

  - by Vincent Grondin

  I joined a fairly large project recently and it has a particularity… Once finished, everything has to be sent to the client under VS2005 using VB.Net and can target either framework 2.0 or 3.0… A long time ago, the decision to use VS2008 and to target framework 3.0 was taken but people knew they would need to establish a few rules to ensure that each dev would use VS2008 as if it was VS2005… Why is that so? Well simply because the compiler in VS2005 is different from the compiler inside VS2008…  I thought it might be a good idea to note the things that you cannot use in VS2008 if you plan on going back to VS2005. Who knows, this might save someone the headache of going over all their code to fix errors… -        Do not use LinQ keywords (from, in, select, orderby…).   -        Do not use LinQ standard operators under the form of extension methods.   -        Do not use type inference (in VB.Net you can switch it OFF in each project properties). o   This means you cannot use XML Literals.   -        Do not use nullable types under the following declarative form:    Dim myInt as Integer? But using:   Dim myInt as Nullable(Of Integer)     is perfectly fine.   -        Do not test nullable types with     Is Nothing    use    myInt.HasValue     instead.   -        Do not use Lambda expressions (there is no Lambda statements in VB9) so you cannot use the keyword “Function”.   -        Pay attention not to use relaxed delegates because this one is easy to miss in VS2008   -        Do not use Object Initializers   -        Do not use the “ternary If operator” … not the IIf method but this one     If(confition, truepart, falsepart).   As a side note, I talked about not using LinQ keyword nor the extension methods but, this doesn’t mean not to use LinQ in this scenario. LinQ is perfectly accessible from inside VS2005. All you need to do is reference System.Core, use namespace System.Linq and use class “Enumerable” as a helper class… This is one of the many classes containing various methods that VS2008 sees as extensions. The trick is you can use them too! Simply remember that the first parameter of the method is the object you want to query on and then pass in the other parameters needed… That’s pretty much all I see but I could have missed a few… If you know other things that are specific to the VS2008 compiler and which do not work under VS2005, feel free to leave a comment and I’ll modify my list accordingly (and notify our team here…) ! Happy coding all!

  Read the article

• GPU hung when switching graphic card

  - by Lie Ryan

  I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

  Read the article

• Token based Authentication and Claims for Restful Services

  - by Your DisplayName here!

  WIF as it exists today is optimized for web applications (passive/WS-Federation) and SOAP based services (active/WS-Trust). While there is limited support for WCF WebServiceHost based services (for standard credential types like Windows and Basic), there is no ready to use plumbing for RESTful services that do authentication based on tokens. This is not an oversight from the WIF team, but the REST services security world is currently rapidly changing – and that’s by design. There are a number of intermediate solutions, emerging protocols and token types, as well as some already deprecated ones. So it didn’t make sense to bake that into the core feature set of WIF. But after all, the F in WIF stands for Foundation. So just like the WIF APIs integrate tokens and claims into other hosts, this is also (easily) possible with RESTful services. Here’s how. HTTP Services and Authentication Unlike SOAP services, in the REST world there is no (over) specified security framework like WS-Security. Instead standard HTTP means are used to transmit credentials and SSL is used to secure the transport and data in transit. For most cases the HTTP Authorize header is used to transmit the security token (this can be as simple as a username/password up to issued tokens of some sort). The Authorize header consists of the actual credential (consider this opaque from a transport perspective) as well as a scheme. The scheme is some string that gives the service a hint what type of credential was used (e.g. Basic for basic authentication credentials). HTTP also includes a way to advertise the right credential type back to the client, for this the WWW-Authenticate response header is used. So for token based authentication, the service would simply need to read the incoming Authorization header, extract the token, parse and validate it. After the token has been validated, you also typically want some sort of client identity representation based on the incoming token. This is regardless of how technology-wise the actual service was built. In ASP.NET (MVC) you could use an HttpModule or an ActionFilter. In (todays) WCF, you would use the ServiceAuthorizationManager infrastructure. The nice thing about using WCF’ native extensibility points is that you get self-hosting for free. This is where WIF comes into play. WIF has ready to use infrastructure built-in that just need to be plugged into the corresponding hosting environment: Representation of identity based on claims. This is a very natural way of translating a security token (and again I mean this in the widest sense – could be also a username/password) into something our applications can work with. Infrastructure to convert tokens into claims (called security token handler) Claims transformation Claims-based authorization So much for the theory. In the next post I will show you how to implement that for WCF – including full source code and samples. (Wanna learn more about federation, WIF, claims, tokens etc.? Click here.)

  Read the article

• C++ Accelerated Massive Parallelism

  - by Daniel Moth

  At AMD's Fusion conference Herb Sutter announced in his keynote session a technology that our team has been working on that we call C++ Accelerated Massive Parallelism (C++ AMP) and during the keynote I showed a brief demo of an app built with our technology. After the keynote, I go deeper into the technology in my breakout session. If you read both those abstracts, you'll get some information about what C++ AMP is, without being too explicit since we published the abstracts before the technology was announced. You can find the official online announcement at Soma's blog post. Here, I just wanted to capture the key points about C++ AMP that can serve as an introduction and an FAQ. So, in no particular order… C++ AMP lowers the barrier to entry for heterogeneous hardware programmability and brings performance to the mainstream, without sacrificing developer productivity or solution portability. is designed not only to help you address today's massively parallel hardware (i.e. GPUs and APUs), but it also future proofs your code investments with a forward looking design. is part of Visual C++. You don't need to use a different compiler or learn different syntax. is modern C++. Not C or some other derivative. is integrated and supported fully in Visual Studio vNext. Editing, building, debugging, profiling and all the other goodness of Visual Studio work well with C++ AMP. provides an STL-like library as part of the existing concurrency namespace and delivered in the new amp.h header file. makes it extremely easy to work with large multi-dimensional data on heterogeneous hardware; in a manner that exposes parallelization. introduces only one core C++ language extension. builds on DirectX (and DirectCompute in particular) which offers a great hardware abstraction layer that is ubiquitous and reliable. The architecture is such, that this point can be thought of as an implementation detail that does not surface to the API layer. Stay tuned on my blog for more over the coming months where I will switch from just talking about C++ AMP to showing you how to use the API with code examples… Comments about this post welcome at the original blog.

  Read the article

• BIP 10.1.3.4.x June 2010 Update Available

  - by Tim Dexter

  A new patchset for 10.1.3.4.0 and 10.1.3.4.1 is available on Metalink. some notes: The patch number is 9791839. This patchset includes 28 new bug fixes since the last patchset release on March 31. This is a culmulative update that includes all the fixes and enhancements from previous updates. The patch will supercede the other two updates. Install instructions are in the readme inside the patch There is also a new BIP client patch available, 9821068. No new template building features to my knowledge but there is an update to the template viewer to allow you to test and debug you siny new Excel templates. Server 8529759XMLP_TEMPLATE_DESIGNER CANNOT SAVE / UPLOAD TEMPLATE 8566455 BI PUBLISHER SCHEDULER DOES NOT START WITH JNDI DATA SOURCE 9295667RESPONSE OF GETSCHEDULEDREPORTINFO RETURNS STATUS AS 'UNKNOWN' INSTEAD OF 'SCHED 9542413 UNABLE TO CREATE A NEW TEMPLATE FROM UI 9546137 EXCEL ANALYZER TEMPLATE FAILS FOR A STRUCTURED XML WHEN IT IS UPLOADED 9556338 SIEBEL - BIP PARAMETERS SORT ORDER 9560562 BI PUBLISHER CACHE DIRECTORY FILLING UP AND POINTING TO INVALID DIRECTORY 9646599 USER ROLE DEFINED AS PRIMARYGROUP IN ACTIVEDIRECTORY GROUP ARE NOT RECOGNIZED 9664768 ER: NEED TO BIND USER ATTRIBUTE VALUES DEFINED IN ACTIVEDIRECTORY IN DATA QUERY 9665075 BI PUBLISHER AFTER 9546699 NOTIFICATIONS FOR REPORTS FAIL 9669973 ER: NEED TO SUPPORT PRE-PROCESSING XML WITH XSL FOR EXCEL TEMPLATE 9704401 ER: NEED TO SUPPORT DEFAULT GROUP FOR ALL USERS IN LDAP/AD SECURITY 9711899 SEARCH PARAMETER IS NOT VISIBLE WHEN SCHEDULE A REPORT 9753736 SOME ROLES FROM ACTIVEDIRECTORY ARE NOT LISTED IN ADMIN ROLE-FOLDER MAPPING 9771354 MULTIPLE PARAMETERS IN 10.1.3.4.1 DATA TEMPLATE ACT ACT DIFFERENTLY FROM 10.1.3. 9772982 "REFRESH OTHER PARAMETERS ON CHANGE" DOESN'T WORK PROPERLY Core  8599646 ER:EXTRA SPACE ADDED BELOW IMAGE IN A TABLE CELL OF TEMPLATE IN FIREFOX 9377593 SOME ROWS HEIGHT IN HTML/EXCEL OUTPUT ARE TOO BIG IN BI PUBLISHER 9487030 NAVIGATION TREE REPEATING TWICE IN PDF DCCUMENT CREATED BY BI PUBLISHER 9509432 PERFORMANCE ISSUE WHEN USING PDF TEMPLATE 9534424 PS: DOCUMENT-REPEAT-FULLPATH-ELEMENTNAME SHOULDNT USE DOT "." AS PATH SEPARATOR 9553360 FORMPROCESSOR CANNOT PARSE SOME PDF TEMPLATES 9554959 TEXT IN AUTOSHAPE IS NOT PROPERLY CUT OFF FOR LINE WRAPPING 9569417 AFTER APPLYING PATCH 9509432 PDF TEMPLATES WITH DBDRV PRODUCE NO OUTPUT 9571670 ER: EXCEL TEMPLATE TO SUPPORT XSLT LOGIC AND XSL CUSTOM EXTENTIONS 9589809 XSL:CALL-TEMPLATE IS MISSING IN GENERATED XSL FILE 9605920 BOOKMARK TESTCASE FAILED DUE TO ER9283933 9689634 PRINT FLOW CHART USING ACROSS 3 DOWN 0 GIVES EXTRA BLANK PAGES You might have noticed some fixes and ehancements to the Excel templates so I can get back on those now. There is a part two to the Mapviewer BIP Mashup coming ... just need aanother 4 hours in the day to squeeze it in.

  Read the article

• CAM v2.0 ships – all new foundation version

  - by drrwebber

  The latest release of the CAM editor toolset is now available on Sourceforge.net – search NIEM. In this all new version the support from Oracle has enabled a transformation of the editor underpinning Java framework and results in 3x performance improvement and 50% better memory utilization. The result of nearly six months of improvements are catalogued in the release notes. http://sourceforge.net/projects/camprocessor/files/CAM%20Editor/Releases/2.0/CAM_Editor_2-0_Release_Notes.pdf/download However here I’d like to talk about the strategic vision and highlight specific new go to features that make a difference for exchange schema designers and with a focus on the NIEM community. So why is this a foundation version? Basically the new drag and drop designer tool allows you to tailor your own dictionary collection of components and then simply select and position those into your resulting exchange structure. This is true global reuse enabled from a canonical domain dictionary collection. So instead of grappling with XSD Schema syntax, or UML model nuances – this is straightforward direct WYSIWYG visual engineering – using familiar sets of business components. Then the toolkit writes the complex XSD Schema for you, along with test samples, documentation, XMI/UML models, Mindmaps and more. So how do you get a set of business components? The toolkit allows you to harvest these from existing schema collections or enterprise data models, or as in the case of NIEM, existing domain dictionary collections. I’ve been using this for the latest IEEE/OASIS/NIST initiative on a Common Data Format (CDF) for elections management systems. So you can download those from OASIS and see how this can transform how you build actual business exchanges – improving the quality, consistency and usability – and dramatically allowing automated generation of artifacts you only dreamed of before – such as a model of your entire major exchange collection components. http://www.oasis-open.org/committees/documents.php?wg_abbrev=election So what we have here is a foundation version – setting the scene and the basis for changing how people can generate and manage information exchanges. A foundation built using the OASIS CAM standard combined with aspects of the NIEM Naming and Design Rules and the UN/CEFACT Core Components specifications and emerging work on OASIS CIQ name and address and ANSI/ISO code list schema. We still have a raft of work to do to integrate this into SOA best practices and extend the dictionary capabilities to assist true community development. Answering questions such as: - How good is my canonical component collection? - How much reuse is really occurring? - What inconsistencies and extensions are there in the dictionary components? Expect us to begin tackling these areas now that the foundation is in place. The immediate need is to develop training and self-start materials – so we will be focusing there for the next couple of months and especially leading up to the IJIS industry event in July in New Jersey, and the NIEM NTE event in August in Philadelphia. http://sourceforge.net/projects/camprocessor

  Read the article

• Five Best Practices for Going Mobile

  - by kellsey.ruppel

  76% of IT decision makers indicate mobile trends will have a high to extremely high impact on their organization. Has your organization gone mobile? Looking for some ideas on how to get started? John Brunswick shares his Best Practices for Going Mobile. Mobile technology has gone from nice-to-have to a cornerstone of user engagement. Mobile access enables social networking, decision support, purchasing, content consumption, and location-based searching, extending experiences beyond what is available in traditional desktop computing.  Organizations rushing to ensure their brand's mobile availability may have taken a tactical approach to implementation, but strategically approaching mobile can enable greater returns on a similar investment and subsequent mobile projects. Here are some strategic considerations for delivering products, services, and information to mobile constituents.  Who, Why, and What? Ask yourself these key questions: who are you attempting to engage through the channel, and why are they engaging you through this channel? What experience will satisfy their needs? What outcome will support your core business? Will you be informing and/or transacting with this person?  Mobile Behavior. Mobile users generally engage for a very specific purpose. Ensure that access to information, services, and products is streamlined. Arriving on a mobile site through search only to be asked to search again frustrates users.  Mobile Is Broad. After establishing the audience and goal, review technology requirements to support them. Do you need a mobile Website, native mobile application, or both? Do you need to support multiple devices? Know the difference between native mobile and mobile Web.  Social Strategy. Users are more likely to trust reviews from peers than marketing information from a vendor. If you are selling products or services, be sure to make social integration part of your strategy.  Content Management. Consider a shared content platform strategy for Web and mobile projects. Fresh, consistent content is important for high-quality experiences. Read more from John Brunswick.We'll also be talking mobile strategies and how you can transform your portal experience and optimize online engagement -- making your portals more interactive and more engaging across multiple channels in a webcast tomorrow. We hope you'll join us!

  Read the article

• Designing a completely new database/gui solution for my compnay

  - by user1277304

  I'm no expert when it come to everything Visual Studio 2010 and utilizing SQL server 2008. I'm sure some of my personal projects I've built for personal use would get laughed off the face of the planet, but SQLCe has been the solution I was looking for those home type of projects. And they work, flawlessly. Now I feel it's time to step up to the big league. I want to develop a complete, unified and module based solution for my company that I'm working for. We're still using stuff from the 80s for goodness sake! I use Excel and query the ancient database on my own because I can't stand the GUI. Nothing against people of age, but the IDE our programmers are using is from the stone age, and they use APL of all things with it. I've yet to see a radio button control anywhere in the GUI where it would make sense. Anyway, I want to do this right from the ground up. I'm by no means a newbie when it comes to programming in .NET 2010, however, I want the entire solution to be professionally done. I want version control, test projects, project flow, SQL 2008 integration and all the bells and whistles that come with that. I know for a fact that if we had something like that running, not only would development costs and time be slashed four fold, but the possibilities for expansion and performance would sky rocket. (Between the GUI an our DB engine, it can only use ONE CORE! ONE! It's 2012 for goodness sake!) Our business is growing and our current ancient solution just can't keep up, and I'd hate to see our business go down in flames because our programmer is stuck in the 80's and refuses to use anything current. So I ask you guys, the experts and know-it-alls, where do I start? Are there any gems of good books out there in the haystack of all "This for dummies" type of deals? I already have several people backing me in this endeavor, and while it may seem brash to just usurp the current programmers, I'm doing this for the company as a whole.

  Read the article

• Recovering an Ubuntu installation - Ubuntu eats itself after 'sudo apt-get install -f'

  - by Tony Martin

  Updater (I assume) put a no entry style alert icon on the panel which informed me that certain package dependencies were not up to snuff. Upgrades were thereafter only partial. The dialogue advised that I sudo apt-get install -f. I did this hoping that app-get would fulfil dependencies and replace corrupted files and watched it systematically remove every component of linux, both the stuff I had installed and the core ubuntu packages. I could only assume at this stage that this was in preparation for a fresh install but, of course, I know better now - if you find yourself with apt-get warning you that you are about to remove several hundred packages and asking you to type an involved confirmation string seek advice before proceeding. I digress. This was a 64 bit install of 12.04. All that is left is grub pointing to a couple of windows recovery partitions on the hard drive. Thankfully the Ext4 partition is reachable from a stick boot. EDIT: I've logged onto the machine with a 64 bit stick and can see the file structure left behind by apt-get after {ahem} fixing. My first instinct was to run install from the stick but it seemed to want to do another install rather than a repair. My question then: is there a way to recover the current installation so that if I reinstall the packages I had they will pick up the original settings? I'm particularly worried about losing email from evolution - the rest I could probably lash back together. As for the use of PPA I'm not sure what you're driving at. I generally use Ubuntu Software Centre to install software, though I have used terminal scripts to add new repositories and software successfully following guidance on various websites. The most recent change I made was a downgrade of Wine in an attempt to install and run excel2007 (a necessity, I think, as I have VBA work to do). The installer had stalled and had to be killed. I wonder if that corrupted whatever database holds a model of the package installation structure. I would also be interested to know how this disaster came about. I see people in the know recommending the sudo apt-get install -f as a fairly innocuous cure in similar circumstances. Thanks for your attention, Tony Martin p.s. Do please forgive the rant aspects of the original post. It's hard to write rationally with a large hole in the pit of your stomach.

  Read the article

• Implementing the Reactive Manifesto with Azure and AWS

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/31/implementing-the-reactive-manifesto-with-azure-and-aws.aspxMy latest Pluralsight course, Implementing the Reactive Manifesto with Azure and AWS has just been published! I’d planned to do a course on dual-running a messaging-based solution in Azure and AWS for super-high availability and scale, and the Reactive Manifesto encapsulates exactly what I wanted to do. A “reactive” application describes an architecture which is inherently resilient and scalable, being event-driven at the core, and using asynchronous communication between components. In the course, I compare that architecture to a classic n-tier approach, and go on to build out an app which exhibits all the reactive traits: responsive, event-driven, scalable and resilient. I use a suite of technologies which are enablers for all those traits: ASP.NET SignalR for presentation, with server push notifications to the user Messaging in the middle layer for asynchronous communication between presentation and compute Azure Service Bus Queues and Topics AWS Simple Queue Service AWS Simple Notification Service MongoDB at the storage layer for easy HA and scale, with minimal locking under load. Starting with a couple of console apps to demonstrate message sending, I build the solution up over 7 modules, deploying to Azure and AWS and running the app across both clouds concurrently for the whole stack - web servers, messaging infrastructure, message handlers and database servers. I demonstrating failover by killing off bits of infrastructure, and show how a reactive app deployed across two clouds can survive machine failure, data centre failure and even whole cloud failure. The course finishes by configuring auto-scaling in AWS and Azure for the compute and presentation layers, and running a load test with blitz.io. The test pushes masses of load into the app, which is deployed across four data centres in Azure and AWS, and the infrastructure scales up seamlessly to meet the load – the blitz report is pretty impressive: That’s 99.9% success rate for hits to the website, with the potential to serve over 36,000,000 hits per day – all from a few hours’ build time, and a fairly limited set of auto-scale configurations. When the load stops, the infrastructure scales back down again to a minimal set of servers for high availability, so the app doesn’t cost much to host unless it’s getting a lot of traffic. This is my third course for Pluralsight, with Nginx and PHP Fundamentals and Caching in the .NET Stack: Inside-Out released earlier this year. Now that it’s out, I’m starting on the fourth one, which is focused on C#, and should be out by the end of the year.

  Read the article

• Business Insight, IT Execution: 9 Project Management Tips

  - by Sylvie MacKenzie, PMP

  Excerpt from Profit Magazine - by David Rosenbaum When Marcos Baccetto was first asked to be the business-side project lead on Eaton Corporation’s Vehicle Group South America (VGSA) Oracle project, the operations services manager responsible for running manufacturing was, he confesses, “a little afraid” because of his lack of IT experience. Today, Baccetto calls the project “a fantastic experience,” and he is a true believer in the benefits of a close relationship between IT implementers and their line-of-business peers. Through his partnership with Jesiele Lima, then VGSA IT manager, Baccetto and Eaton’s South American operations team came to understand several important principles of business and IT. Here he shares nine tips managers should consider when working on an enterprise technology project. 1. Make it a business project, not an IT project. All levels of functional management must have ownership, responsibility, and accountability for the success of the implementation. 2. Share responsibility. Business owners should sign off on tests and data conversion. 3. Clean your data. Dedicating a team to improve core data quality prior to project launch can be a significant time-saver. 4. Select resources properly. Have functional people who can translate business needs to IT and can influence organizational change. 5. Manage scope. Follow project management methodologies and disciplines. 6. Adopt common processes, global solutions. Avoid customized, local solutions. The big-picture business goals can get lost in the details. 7. Implement processes prior to the go-live date. Change management can be key. Keep the workforce informed and train users in advance. 8. Define metrics milestones. Assume there will be a crisis during deployment. Having baseline metrics to compare against will help implementers keep their cool—and the project moving forward. 9. The sponsor’s commitment is critical. It is needed to support the truly difficult decisions.

  Read the article

• Oracle went back to school !....

  - by Cristina Ciocoiu

  I am Georgiana, Contracts Manager for Oracle University and Advanced Customer Services in Romania. I started working for Oracle for 4 years ago as a Contracts Specialist. Two years ago I became a manager of a team of 9 Contracts Specialists. On a sunny day in March some members of my team visited the students of the Academy of Economic Studies, accompanied by Recruitment colleagues. This was part of a new initiative to raise awareness on career opportunities at Oracle. We spent approximately 2 hours illustrating and explaining different aspects of the day-to-day activities of an Oracle Contracts Specialist to the future graduates of the Academy. Role Play Since a role play is worth 1000 job descriptions, the audience witnessed an entertaining performance on the contracting process from the phase of the negotiation with the customer to actual signing of the contract. The main focus was on the role of Contracts Specialist liaising with all the groups involved and ensuring that the contract is compliant with Oracle policies while generating the expected revenue. However, the team took other roles as well i.e. Sales Representative, Customer, Business Approver and Lawyer to demonstrate their role in the process. As each of these roles only have a small slice of the big pie, it is vital to understand what happens before and after you come on stage as a Contract Specialist. Contracts Specialist Being a Contracts Specialist goes beyond simply knowing what policies apply, it means understanding Oracle’s core business model, understanding customers’ requests and addressing them in the most effective way. The job also involves connecting smaller teams that are often geographically dispersed across multiple regions so that they become a bigger, stronger and successful team. You are the expert in this key position that can facilitate the closing of a deal or stop it from happening if the risk is too high. The role play provided insights on both. Why I love this job Events of this kind are sometimes just as useful for the “recruiters” as for the “recruits”. For me, as a presenter, it was an excellent opportunity to think about the many reasons why I love what I do in the Contracts department every day and to share this with the students. I wanted to explain to the audience, who are still considering education and career possibilities, that what we do in Contracts DOES make a difference. You have the power to achieve targets that you did not think reachable before. Working in the dynamic Oracle environment shapes you as a person and there is a lot to take away from this experience. Looking back to my years in the Academy (I graduated from the Academy myself), I wish I could have listened to more people talking about their great jobs and about how I could get there. If those were Oracle people I might have been writing this article sooner. J If you are interested to join the Contracts team please click here for more information or contact lavinia.protopopescu-AT-oracle-DOT-com. You can find all openings in Romania via http://campus.oracle.com

  Read the article

• OS Missing? Messed up the MBR on Win7 64-bit

  - by hom3lesshom3boy

  I have a Windows 7 machine with two hard drives: a 1TB C: drive and 500GB J:. I had Windows XP installed on C: and Windows 7 installed on J:. I installed Windows 7 after Windows XP from an installer .exe I (legally) bought and downloaded. It, and all of my other files, are sitting on my J: drive intact. While under my Windows 7 install, a few days ago I decided to use Priform's CCleaner and use its DriveWipe utility to wipe the C: drive. 1% into the process, I cancelled and attempted to use it again. It gives me an error saying it can't format the drive, so I poke around the Internet a bit, give up, and restart my computer. I first get an "OS is missing" error after the computer boots past the BIOS. I downloaded and put UBCD on a bootable USB to use another drivewiping tool to completely erase the C: drive, hoping it'll take the problem with it. No luck. I try to use TestDisk to make my J: my primary active drive, but no luck. I still get the "OS is missing" error. Or sometimes it'll hang at Verifying DMI Pool. Or sometimes I'll get the "NTLDR is missing" error. I get hold of Hiren's and put it on another bootable USB. I first I tried the Boot Windows 7 from Hard Drive option, and I get "Error 15: File Not Found". I tried the "Fix 'NTLDR is Missing'" option (I'm not quite sure why this is even showing up, since I'm trying to get into a HDD with Windows 7 installed. Probably messed up somewhere when I used TestDisk) and I get this list: I'll run through the error messages I get: 1st Try - Windows could not start because the following file is missing or corrupt: \system32\hal.dll 2nd Try - Windows could not start because the following file is missing or corrupt: \system32\ntoskrnl.exe 3rd Try - Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. 4th - 8th Try - Same as #3 9th Try - I/O Error accessing boot sector file multi(0)disk(0)fdisk(0)\BOOTSEC.DOS. And computer freezes. 10th Try - computer restarts Needless to say, not a single one of those works. I then tried to open up the Windows 7 exe I have sitting on my J: from the Mini-XP OS on Hiren's, but it won't run because I'm trying to run a 64-bit file from a 32-bit exe. At least, that's the problem according to these guys: http://social.technet.microsoft.com/...-b2f54e9c7d18/ I then borrowed a 64-bit Windows Home Premium CD from a friend to get to the recovery options. But I get the error message: This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows. I pressed Shift + F10 to get to the Command Prompt directly. These are the exact steps I took from there (paraphrased a little): X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. I restarted my computer, but it still didn't work. I unplugged the C: drive, then tried bootrec and Diskpart: X:\Sources> bootrec.exe X:\Sources> bootrec /RebuildBcd Total identified Windows installations: 1 [1] \\?\GLOBALROOT\Device\HarddiskVolume1\Windows Add installation to bootlist? Yes(Y)/No(N)/All(A):y The requested system device cannot be found. X:\Sources>DiskPart DISKPART> List Disk Disk # Status Size Free Dyn Gpt Disk 0_Online_465GB_0B_______* Disk 1 Online 1000MB 0B (this is Hiren's on a bootable usb) DISKPART> Select Disk 0 Disk 0 is now the selected disk. DISKPART> List Partition Partition # Type Size Offset Partition 1 System 465GB 31KB DISKPART> Select Partition 1 Partition 1 is now the selected partition DISKPART> Active The selected disk is not a fixed MBR disk. The ACTIVE command can only be used on fixed MBR disks. DISKPART> exit Leaving Diskpart... X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. Before I go any further, is there anything I'm overlooking/doing wrong? All I care about is making the J: and Windows 7 bootable again. SPECS: Windows 7 Professional 64-Bit GIGABYTE - Motherboard - Socket 775 - GA-P35-DS3R (rev. 2.1) Crucial Ballistix 2048MB PC6400 DDR2 800MHz (2x2GB) Intel Core 2 Duo E6700 Processor (2.6 (6GHZ) I think... not sure anymore C: HDD - SAMSUNG HD103UJ (1TB, not plugged in) J: HDD - WDC WD5000AKS-00V1A0 (500GB)

  Read the article

• Why is my laptop so sluggish? Or Damn You Facebook and Twitter! Or All Hail Chrome!

  - by John Conwell

  In the past three weeks, I've noticed that my laptop (dual core 2.1GHz, 2Gb RAM) has become amazingly sluggish.  I only uses for communications and data lookup workflows, so the slowness was tolerable.  But today I finally got fed up with the suckyness and decided to get to the root of the problem (I do have strong performance roots after all). It actually didn't take all that long to figure it out.  About a year ago I converted to Google Chrome (away from FireFox).  One of the great tools Chrome has is a "Task Manager" tool, that gives you Windows Task Manager like details for all the tabs open in the browser (Shift + Esc).  Since every tab runs in its own process, its easy from Task Manager (both Windows or Chrome) to identify and kill a single performance offending tab.  This is unlike IE, where you only get aggregate data about all tabs open.  Anyway, I digress.  Today my laptop sucked.  Windows Task Manager told me that I had two memory hogging Chrome tabs, but couldn't tell me which web page those tabs are showing.  Enter Chrome Task Manager which tells you the page title, along with CPU, memory and network utilization of each tab.  Enter my amazement.  Turns out Facebook was using just shy of half a Gb of RAM.  Half a Gigabyte!  That's 512 Megabytes!524,288 Kilobytes! 536,870,912 Bytes!  Or 4,294,967,296 Bits!  In other words, that's a frackin boat load of memory.  Now consider that Facebook is running on pretty much 96.3% (statistics based on absolutely nothing) of every house hold desktop, laptop, netbook, and mobile device in America, that is pretty horrific! And I wasn't playing any Facebook games like FarmWars or MafiaVille.  I just had my normal, default home page up showing me who just had breakfast, or just got finished with their morning run. I'm sorry...let me say that again...HALF A GIG OF RAM!  That is just unforgivable. I can just see my mom calling me up:  Mom: "John...I think I need a new computer.  Mine is really slow these days" John: "What do you have running?" Mom: "Oh, just Facebook" John: "Ok, close Facebook and tell me how fast your computer feels" Mom: "Well...I don't know how fast it is.  All I do is use Facebook" John: "Ok Mom, I'll send you a new computer by Tuesday" Oh yea...and the other offending web page?  It was Twitter, using a quarter of a Gigabyte. God I love social networks!

  Read the article

• Parallel MSBuild FTW - Build faster in parallel

  - by deadlydog

  Hey everyone, I just discovered this great post yesterday that shows how to have msbuild build projects in parallel Basically all you need to do is pass the switches “/m:[NumOfCPUsToUse] /p:BuildInParallel=true” into MSBuild. Example to use 4 cores/processes (If you just pass in “/m” it will use all CPU cores): MSBuild /m:4 /p:BuildInParallel=true "C:\dev\Client.sln" Obviously this trick will only be useful on PCs with multi-core CPUs (which we should all have by now) and solutions with multiple projects; So there’s no point using it for solutions that only contain one project.  Also, testing shows that using multiple processes does not speed up Team Foundation Database deployments either in case you’re curious Also, I found that if I didn’t explicitly use “/p:BuildInParallel=true” I would get many build errors (even though the MSDN documentation says that it is true by default). The poster boasts compile time improvements up to 59%, but the performance boost you see will vary depending on the solution and its project dependencies.  I tested with building a solution at my office, and here are my results (runs are in seconds): # of Processes 1st Run 2nd Run 3rd Run Avg Performance 1 192 195 200 195.67 100% 2 155 156 156 155.67 79.56% 4 146 149 146 147.00 75.13% 8 136 136 138 136.67 69.85%   So I updated all of our build scripts to build using 2 cores (~20% speed boost), since that gives us the biggest bang for our buck on our solution without bogging down a machine, and developers may sometimes compile more than 1 solution at a time.  I’ve put the any-PC-safe batch script code at the bottom of this post. The poster also has a follow-up post showing how to add a button and keyboard shortcut to the Visual Studio IDE to have VS build in parallel as well (so you don’t have to use a build script); if you do this make sure you use the .Net 4.0 MSBuild, not the 3.5 one that he shows in the screenshot.  While this did work for me, I found it left an MSBuild.exe process always hanging around afterwards for some reason, so watch out (batch file doesn’t have this problem though).  Also, you do get build output, but it may not be the same that you’re used to, and it doesn’t say “Build succeeded” in the status bar when completed, so I chose to not make this my default Visual Studio build option, but you may still want to. Happy building! ------------------------------------------------------------------------------------- :: Calculate how many Processes to use to do the build. SET NumberOfProcessesToUseForBuild=1  SET BuildInParallel=false if %NUMBER_OF_PROCESSORS% GTR 2 (                 SET NumberOfProcessesToUseForBuild=2                 SET BuildInParallel=true ) MSBuild /maxcpucount:%NumberOfProcessesToUseForBuild% /p:BuildInParallel=%BuildInParallel% "C:\dev\Client.sln"

  Read the article

< Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >