Search Results

Search found 8172 results on 327 pages for 'job interview'.

Page 265/327 | < Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >

  • CentOS security for lazy admins

    - by Robby75
    I'm running CentOS 5.5 (basic LAMP with Parallels Power Panel and Plesk) and have thus far neglected security (because it's not my full-time job, there is always something more important on my todo-list). My server does not contain any secret data and also no lives depend on it - Basically what I want is to make sure it does not become part of a botnet, that is "good enough" security in my case. Anyway, I don't want to become a full-time paranoid admin (like constantly watching and patching everything because of some obscure problem), I also don't care about most security problems like DOS attacks or problems that only exist when using some arcane settings. I'm in search of a "happy medium", for example a list of known important problems in the default installation of CentOS 5.5 and/or a list of security problems that have actually been exploited - not the typical endless list of buffer overflows that "maybe" a problem in some special case. The problem that I have with the usually recommended approaches (joining mailing lists, etc.) is that the really important problems (something where an exploit exists, that is exploitable in a common setup and where the attacker can do something really useful - i.e. not a DOS) are completely and utterly swamped by millions of tiny security alerts that surely are important for high-security servers, but not for me. Thanks for all suggestions!

    Read the article

  • Possible to IPSec VPN Tunnel Public IP Addresses?

    - by caleban
    A customer uses an IBM SAS product over the internet. Traffic flows from the IBM hosting data center to the customer network through Juniper VPN appliances. IBM says they're not tunneling private IP addresses. IBM says they're tunneling public IP addresses. Is this possible? What does this look like in the VPN configuration and in the packets? I'd like to know what the source/destination ip/ports would look like in the encrypted tunneled IPSec Payload and in the IP packet carrying the IPSec Payload. IPSec Payload: source:1.1.1.101:1001 destination:2.2.2.101:2001 IP Packet: source:1.1.1.1:101 destination:2.2.2.1:201 Is it possible to send public IP addresses through an IPSec VPN tunnel? Is it possible for IBM to send a print job from a server on their network using the static-nat public address over a VPN to a printer at a customer network using the printer's static-nat public address? Or can a VPN not do this? Can a VPN only work with interesting traffic from and to private IP addresses?

    Read the article

  • Find and Replace several several different values all at once

    - by matt
    I have a file with multiple instances of Text_1 and Text1 and I need to replace both those strings with Text_A and TextB respectively. Currently I'm doing two Find and Replace functions on each file one that finds Text_1 and replaces it with Text_A and the other that finds Text1 and replaces it with TextB. Is there any way to do this all at once instead of having to run "Find and Replace" twice? I am using Dreamweaver CS3, but I also have Notepad++, regular Notepad, OO Writer, MS Word if those will be easier. Ideally I could do this in Dreamweaver or Notepad++ but I'm open to downloading something else to get the job done. I'd prefer not to have to do any command line stuff or create a batch file (while I'm aware of it, I don't understand it really). Edit: In case the above description isn't clear, let me explain it this way... I want to run Find & Replace 1 time in 1 document and I want it to do ALL of the following during that one Find & Replace instance: Find: Text_1 and Replace with: Text_A Find: Text1 and Replace with: TextB I am not trying to do a Find and Replace across several documents.

    Read the article

  • Identifying Httpd error log in Fedora 16

    - by Cerin
    How do you find the cause of httpd errors in Fedora 16? The new systemctl command in Fedora 16 seems to horribly obscure any useful logging info. [root@host ~]# systemctl start httpd.service Job failed. See system logs and 'systemctl status' for details. [root@host ~]# systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/lib/systemd/system/httpd.service; enabled) Active: failed since Thu, 21 Jun 2012 16:26:56 -0400; 1min 23s ago Process: 2119 ExecStop=/usr/sbin/httpd $OPTIONS -k stop (code=exited, status=0/SUCCESS) Process: 2215 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=1/FAILURE) Main PID: 1062 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/httpd.service So the first command fails...and it tells me to run another command...which simply tells me that the command returned an error code. Where's the actual error? Even more frustrating is nothing seems to have been written to the logs: [root@host ~]# ls -lah /var/log/httpd/ total 8.0K drwx------. 2 root root 4.0K Jun 21 16:19 . drwxr-xr-x. 21 root root 4.0K Jun 20 16:33 .. -rw-r----- 1 root root 0 Jun 21 16:19 modsec_audit.log -rw-r----- 1 root root 0 Jun 21 16:19 modsec_debug.log

    Read the article

  • Which server software and configuration to retrieve from multiple POP servers, routing by address to correct user

    - by rolinger
    I am setting up a small email server on a Debian machine, which needs to pick up mail from a variety of POP servers and figure out who to send it to from the address, but I'm not clear what software will do what I need, although it seems like a very simple question! For example, I have 2 users, Alice and Bob. Any email to [email protected] ([email protected] etc) should go to Alice, all other mail to domain.example.com should go to Bob. Any email to [email protected] should go to Bob, and [email protected] should go to Alice Anything to *@bobs.place.com should go to Bob And so on... The idea is to pull together a load of mail addresses that have built up over the years and present them all as a single mailbox for Bob and another one for Alice. I'm expecting something like Postfix + Dovecot + Amavis + Spamassassin + Squirrelmail to fit the bill, but I'm not sure where the above comes in, can Postfix deal with it as a set of defined regular expressions, or is it a job for Amavis, or something else entirely? Do I need fetchmail in this mix, or is its role now included in one of the other components above. I think of it as content-filtering, but everything I read about content-filtering is focussed on detecting spam rather than routing email.

    Read the article

  • Why can't this user connect to domain share?

    - by Saariko
    Part of my reorganizing credentials in the domain, I have created several users that will be used solely for services (backup, LDAP, etc) The idea is that systems that need specific usage will use a user/service user, that will give them what they need. However, I am having trouble setting the correct needed data. For this example, I have a NAS (Ready NAS 1100 by Netgear), that runs it's own backup jobs. The job reads from a domain share: \domain\qa and copies all data to another location. When using the domain\administrator everything works. When I input the domain\srv.backup user I get an error connecting to the folder. The srv.backup is part of the 'Domain Admins' group, which is a member of 'Administrators' I thought there might be propagation issues, but even when the srv.backup user was a direct member of 'Administrators' the error still occurred. I have 2 DC's (W2K8R2 replicas) - I thought that could also cause a problem, AFAIKT it's not the issue. Sharing permissions are open to everyone The Security on the folder is as follow This is the test window from the NAS dashboard I doubled check that the 'srv.domain' is part of the 'Domain Admins' group As well as tried with a simple 1-9 password. What else do I need to check? thanks.

    Read the article

  • CMS/Wiki to use for a HTML5 video site

    - by Clinton Blackmore
    Greetings. I want to put up a website with instructive screencasts, and allow for people to add comments to them. I would like use the Video for Everybody technique, partly because I dislike Flash and because it helps in a small way to move the web forward [while being backwards compatable]. I recognize that HTML5 is still in draft, and that support for it varies. I do have some hosting space, and can run Perl, PHP, and Ruby on Rails applications, with a MySQL backend. I should mention that part of my working job involves running some web servers, and that I am a programmer by training (with only a limited familiarity with Perl and PHP, and none with Ruby). I should mention why I don't particularly want to go with a video hosting site (like YouTube or Vimeo): Flash Video Resolution and Quality [I'd like to put up 800x600 videos] Videos promote a club that is not stricly non-profit [ie. may fall afoul of Terms of Service] I'm already paying for web hosting, and free video hosting comes with time and bandwidth limits I don't want there to be two locations where you can comment on the video Now, having said all that, I'd be quite comfortable putting up my own HTML pages, except: that's so web 1.0! :) [ie. it does not allow for comments] I also want to do some blogging and possibly put up a wiki; the site will not be entirely screencasts So, can anyone recommend a CMS (or Wiki, or similar application) that I can customise for this purpose?

    Read the article

  • Cisco 7206 error trying to copy running-config (Bad file number)

    - by jasondewitt
    I have a cisco 7206 that terminates a bunch of pppoa sessions for dsl users. Today I noticed that if I tried to "show run" nothing happened. I mean that it doesn't show anything and just sends me right back to the command prompt. I decided I should probably try and back up the config and that is where I'm stuck. Any time I try to copy the running-config to tftp or to pcmcia card that I know is not full I get the following error: %Error opening system:/running-config (Bad file number) I get this error when I try to do anything with the running config. I've been googling around, but I haven't found any thing else that talks about this error. I've seen people say to erase the nvram and then try to "copy run start", but I don't want to erase the nvram until I can pull off a copy of the running-config. I would try to reboot it, but the startup-config that is on the nvram looks to be woefully out of date (good job me!). Any ideas what might be wrong? or how I can get the running config off the router?

    Read the article

  • Will just a couple of thermal "trip" shutdowns typically damage a CPU?

    - by T.J. Crowder
    The short version If a CPU gets so hot that the system turns itself off because of a thermal trip signal just a couple of times, is it likely that the CPU will be damaged? Or does the trip do its job, turning it off before the CPU gets damaged? (This is with all default settings in the BIOS; I haven't raised any temp thresholds or overclocked anything.) The longer version I just got this Intel Atom D510-based fanless system, installed a 2.5" mobile SATA drive and two 2GB PC2-6400s, closed it up, and having checked everything was recognized in the BIOS, set about installing Ubuntu. After a couple of false starts related, I think, to the external DVD drive I was using, I got the install happily running along. About three-fourths or so of the way through the install, having been running less than an hour, the machine turned itself off. I was actually out of the room at the time, but when I came back and turned it back on, it said it had shut down due to a thermal event. I went into the BIOS and saw that (at that point, having just been turned back on after a couple of minutes off), it was running 87C. As near as I can tell from Intel's docs (PDF here), the max "junction" temperature for the CPU is 100C and it will raise a THERMTRIP signal at 125C. Yowsa. Presumably there will be some back-and-forth with the vendor on this, I'm just wondering whether letting it get that hot a couple of times is likely to end up damaging it.

    Read the article

  • APACHE - PHP - Bounce emails

    - by user1179459
    I want to improve our mail server lists by handling all the bounces we get in our websites. I have a website which has over 8000+ users and another website which as over 1500+ users, they are emailed various notifications every second, ie. job alerts, email alerts, I am using POP connections with EXIM on APACHE server, most scripts are based on PHP language generates email on the fly. Problems i have But some users has registered long time ago and now quite few has bounce email address Some users register with dummy emails like [email protected] which never existed but a valid email address, any chance of stopping this without asking them login to the email account and clicking links which dont work most times.. (too annoying to the end user) Server is sending unnecessary emails can be avoided if i know they dont exists ? Solutions i need to have Is there a way i can download the bounce email list somewhere (WHM/Cpanel), i know exim mail has it but its not readable (i need a file like CSV or something similar to scan them over and write a php script to delete the users from the database ?) I need to know if there is any function in the PHP that can check the existence of the email address on the fly ? so that i can set the email send function in the mailer class to check before it sends out. On the server will bouncing emails are going to eatup lots of server resources ? like memory/cpu on processing them ? or are they are minimal where we dont have to worry about this at all ? May be a opensoruce or linux software to capture them and view them in a report basis and cleaning them up ? I am not a linux expert or server admin but i do lot of PHP coding, so please be descriptive of the solutions specially if they are linux commands Thank you!

    Read the article

  • Use Alladin eToken with ThunderBird and other tool

    - by Yurij73
    I'm looking for an example on how to setup the eToken PRO Java device to work with Mozilla Thunderbird and with other Linux tool such as PAM logon. I installed distributed pkiclient-5.00.28-0.i386.RPM from the official product page eToken Pro but that tool only handles importing/exporting certificates on the device. I read a glance an old HOWTO from eToken on Linux, but I couldn't install pkcs11-lib for this device as recommended for Thunderbird use this crypto device. It seems my usb token isn't listed in system, unless lsusb show it, so that is the matter modutil -list -dbdir /etc/pki/nssdb Listing of PKCS #11 Modules NSS Internal PKCS #11 Module Blockquote slots: 2 slots attached Blockquote status: loaded Blockquote slot: NSS User Private Key and Certificate Services Blockquote token: NSS Certificate DB Blockquote CoolKey PKCS #11 Module Blockquote library name: libcoolkeypk11.so Blockquote slots: 1 slot attached Blockquote status: loaded Blockquote slot: AKS ifdh [Main Interface] 00 00 token: is my token absent? on other hand i don't know which module is convenient to Java Pro, does CoolKey does all the job well? It seems Java token is too new hardware for Linux? there is excerpt from /etc/pam_pkcs11.conf #filename of the PKCS #11 module. The default value is "default" use_pkcs11_module = coolkey; screen_savers = gnome-screensaver,xscreensaver,kscreensaver pkcs11_module coolkey { module = libcoolkeypk11.so; description = "Cool Key"`

    Read the article

  • Need help to configure file:default on apache2

    - by turk182
    hi all!! im trying to use xen on ubuntu 8.04 hardy heron, because it is a project that assign to me in my new job, i have already installed xen and im running the virtual machines. according to the guide that they give me, i have to configure de file: default, from apache2 directory, like this: vi /etc/apache2/sites-available/default inside of this file i have to write the next information: NameVirtualHost * VirtualHost * ServerName "www".ejemplo.com ServerAlias ejemplo.com DocumentRoot /var/www/ ProxyRequests Off Proxy * Order deny,allow Allow from all /Proxy ProxyPass /balancer-manager ! ProxyPass / balancer://mycluster/ stickysession=BALANCEID nofailover=On ProxyPassReverse / "http"://http1.ejemplo.com/ ProxyPassReverse / "http"://http2.ejemplo.com/ Proxy balancer://mycluster BalancerMember "http://10.10.2.101:8080 loadfactor=1 BalancerMember "http://10.10.2.102:8080 loadfactor=2 ProxySet lbmethod=byrequests /Proxy Location /balancer-manager SetHandler balancer-manager Order deny,allow Allow from all /Location /VirtualHost in the section of balancermember im using the ip of the virtual machine: virtual machine 1 has ip 10.10.2.101 and virtual machine 2 has ip 10.10.2.102 then i have to install apache2 on each virtual machine and restart apache2 the question is what i hace to do to verify if all of this works allegedly i have to open a browser and write "www.ejemplo.com" and suppost show something thats the reason that im ask for help cause i dont know what to do, im looking for on the web and i cant find nothing related with this... ill appreciatte your help. THXS!!! pd. i closed "www" and "HTTP" in quotes by rules of this sites cause im a new user

    Read the article

  • Better approach to archiving large amounts of original video footage using optical media (DVD/Blu-ra

    - by Rob
    This question is to share my experience as well as ask for suggestions for better methods. Along with 2 friends, I completed the making of a short documentary film in 2006. Clip is at: http://www.youtube.com/mediamotioninvision The film was edited in Adobe Premiere Pro 1.5 on Windows XP. More details and screenshot here: http://www.flickr.com/photos/smilingrobbie/1350235514/ ( note this is not intended to be a plug, we've moved on from this initial learning curve project ;) ) The film is in 4:3 standard definition 720x576 PAL format. As well as retaining the final 30minute film, I wanted to keep all original files that assembled together to make the film. The footage was 83.5Gb So I archived them to over 20 4.7Gb DVD recordables in the original .avi format (i.e. data DVD-ROM format, NOT DVD-Video Mpeg2) Some .avi DV video files were larger than 4.7Gb so I used 7-zip to split them ( here is a guide as to how to do that: http://www.linglom.com/2008/10/12/how-to-split-a-large-file-using-7-zip/ ) To recombine them, a dos shell command like this would do that: copy /b file.avi.* file.avi would do the job, where .* is a wild card to include all the split parts e.g. 001, 002...00n assuming they are all in the same directory path folder. file.avi is the recombined file identical to the original. Later on, I bought a LG BE06 LU10 USB 2.0 Super-multi Blu-ray burner and archived the footage to 2 (two) x 50Gb BD-R DL discs. Again in the original format, written as files to a BD-R in the BD-R BD-ROM UDF format readable by PC/Mac etc, NOT Blu-ray video/film format. This seems to be a good solution for me, because: the archive is in a robust, reasonably permanent, non-volatile medium, i.e. DVD recordable / Blu-ray (debates about stability of optical media organic chemical dye compounds/substrates aside) the format of the archive is accessible by open source tools or just plain Windows Explorer and it's not in a proprietary format I just thought I'd ask folks for their experience on better methods, if such exist.

    Read the article

  • Error when starting qpidd as a service

    - by Sparks
    I have recently swapped from CENTOS 5 to FEDORA 17. Previously I have created my own init.d scripts successfully (albeit not for qpidd) however, in FEDORA I cannot get it to work. I have created the following script (called qpidd) in the init.d directory: #!/bin/bash # # /etc/rc.d/init.d/qpidd # # QPID/AMQP Broker scripts # # # chkconfig: 2345 20 80 # description: QPID/AMQP Broker service # processname: qpidd # pidfile: /var/lock/subsys/qpidd # Source function library. . /etc/init.d/functions SERVICENAME=qpidd start() { echo -n "Starting $SERVICENAME: " daemon qpidd -d & retval=$? touch /var/lock/subsys/$SERVICENAME return $retval } stop() { echo -n "Shutting down $SERVICENAME: " qpidd -q & retval=$? rm -f /var/lock/subsys/$SERVICENAME return $retval } case "$1" in start) start ;; stop) stop ;; status) status qpidd ;; restart) stop start ;; condrestart) [ -f /var/lock/subsys/<service> ] && restart || : ;; *) echo "Usage: $SERVICENAME {start|stop|status|restart" exit 1 ;; esac exit $? After this, I ran chkconfig --add qpidd, however, now when I run sudo service qpidd start I get the following message: Starting qpidd (via systemctl): Job failed. See system journal and 'systemctl status' for details. If I then run systemctl status qpidd I get the following message: Failed to issue method call: Unit name qpidd is not valid. I am now lost, I have search the web and Stack Overflow but cannot find anybody with similar problem, any help or direction to a website that can help would be much appreciated Sparks :)

    Read the article

  • windows clients cannot get dns resolution until you open and close ipv4 properties page

    - by GC78
    This strange problem has started recently. Some windows clients cannot seem to get dns resolution to the internet after boot, and sometimes again at some point in the day. Internal hosts are also slow to resolve. trying to ping an interal host by name will take a long time for the hostname to resolve to ip address and trying to ping a website by name will fail to resolve. If you go into the tcp/ip v4 properties and view but not change anything, ok/close out of that then the client starts working fine, hostnames will resolve quickly. I have seen this happen on both Vista and W7 clients. ipconfig /all at a client experiencing this problem shows everything in order. proper ip addr, gateway, dns server, dns suffix ect.. ipconfig /dnsflush will not fix them, neither will /release and /renew the clients get their ip address, mask and dns server info from either one of 2 OES dhcp servers that assign addresses in different scopes in the same subnet. the internal dns server is a different OES dns server the default gateway is not assigned by the OES server but is statically put in at the client (only for those who need to get to the Internet for their job) flat network topology What can I do to get to the bottom of this? It only happens to a few of the client machines and typically the same ones. It started happening when we made a change to one of the DHCP scopes in iManager. Strangly this problem only happens to clients that get an IP address from the scope that we didn't make any changes to.

    Read the article

  • installing lots of perl modules

    - by Colin Pickard
    Hi, I've been landed with the job of documenting how to install a very complicated application onto a clean server. Part of the application requires a lot of perl scripts, each of which seem to require lots of different perl modules. I don't know much about perl, and I only know one way to install the required modules. This means my documentation now looks this: Type each of these commands and accept all the defaults: sudo perl -MCPAN -e 'install JSON' sudo perl -MCPAN -e 'install Date::Simple' sudo perl -MCPAN -e 'install Log::Log4perl' sudo perl -MCPAN -e 'install Email::Simple' (.... continues for 2 more pages... ) Is there any way I can do all this one line like I can with aptitude i.e. Type the following command and go get a coffee: sudo aptitude install openssh-server libapache2-mod-perl2 build-essential ... Thank you (on behalf of the long suffering people who will be reading my document) EDIT: The best way to do this is to use the packaged versions. For the modules which were not packaged for Ubuntu 10.10 I ended up with a little perl script which I found here ) #!/usr/bin/perl -w use CPANPLUS; use strict; CPANPLUS::Backend->new( conf => { prereqs => 1 } )->install( modules => [ qw( Date::Simple File::Slurp LWP::Simple MIME::Base64 MIME::Parser MIME::QuotedPrint ) ] ); This means I can put a nice one liner in my document: sudo perl installmodules.pl

    Read the article

  • Upstart: cannot run as root

    - by Ronni Egeriis
    I have made this upstart script, which starts a Node.js service. But all of the sudden the service has stopped, and upstart has failed to restart it. Now that I am trying to start it manually, it fails to recognize my service: start: Unknown job: queue The script is properly placed in /etc/init, and should have the correct rights: -rw-r--r-- 1 root root 200 Aug 7 13:30 queue.conf When I check the config file with init-checkconf however, it says that it is not able to run as root: root@production1:~# init-checkconf /etc/init/queue.conf ERROR: cannot run as root What causes this error and how do I solve it? Debug info: Ubuntu 12.04.3 LTS root@production1:~# service --version service ver. 0.91-ubuntu1 Edit Here's queue.conf: description "Echo.it command queue" author "Ronni Egeriis Persson <[email protected]>" stop on shutdown respawn respawn 20 5 exec sudo -u beanstalk /usr/bin/node /var/www/queue/index.js >> /var/log/queue.log 2>&1 The command sudo -u beanstalk /usr/bin/node /var/www/queue/index.js >> /var/log/queue.log 2>&1 works fine when run manually.

    Read the article

  • Trying to setup catchall mail forwarding on my rackspace's cloudspace server

    - by bob_cobb
    I'm running Ubuntu 12 Precise Pangolin and am trying to configure my server to catchall mail sent to it and forward it to my gmail address. I've been trying lots of examples online like editing my main.cf file which looks like this: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = destiny alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = destiny, localhost.localdomain, localhost relayhost = smtp.sendgrid.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 51200000 recipient_delimiter = + inet_interfaces = all inet_protocols = all In my /etc/postfix/virtual I have: @mydomain.com [email protected] @myotherdomain.com [email protected] Which isn't working when I email [email protected] or [email protected]. So I got the recommendation to add the following to my /etc/alias: postmaster:root root:[email protected] restarted postfix, and tried emailing [email protected] or [email protected] but it still won't send. Does anyone have any idea what I'm doing wrong here? I'd appreciate any help.

    Read the article

  • mod_cache not working

    - by Pistos
    I have a PHP site that has many dynamically generated pages. I'm trying to turn to mod_cache to help boost performance, because in most cases, content does not change in a given day. I have configured mod_cache as best I could, following examples around the web, including the mod_cache page on apache.org. When I set LogLevel debug, I see a bit of information about the caching that is [not] happening. There are plenty of pairs of lines like this: [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(141): Adding CACHE_SAVE filter for /foo/bar [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(148): Adding CACHE_REMOVE_URL filter for /foo/bar Which is fine, because I've set CacheEnable disk /foo, to indicate that I want everything under /foo cached. I'm new to mod_cache, but my understanding about these lines is that it just means that mod_cache has acknowledged that the URL is supposed to be cached, but there are supposed to be more lines indicating that it is saving the data to cache, and then later retrieving them on subsequent hits to the same URL. I can hit the same URL till I'm blue in the face, whether with F5 refreshing, or not, or with different browsers, or different computers. It's always that pair of lines that shows in the logs, and nothing else. When I set CacheEnable disk /, then I see more activity. But I don't want to cache the entire site, and there are many, many different subpaths to the site, so I don't want to have to modify code to set no-cache headers in all the necessary places. I'll mention that mod_rewrite is in use here, rewriting /foo/bar to something like index.php?baz=/foo/bar, but my understanding is that mod_cache uses the pre-rewrite URL, not the post-rewrite URL. As far as I can tell, I have the response headers not getting in the way of caching. Here's an example from one hit: Cache-Control:must-revalidate, max-age=3600 Connection:Keep-Alive Content-Encoding:gzip Content-Length:16790 Content-Type:text/html Date:Fri, 01 Jun 2012 21:43:09 GMT Expires:Fri, 1 Jun 2012 18:43:09 -0400 Keep-Alive:timeout=15, max=100 Pragma: Server:Apache Vary:Accept-Encoding mod_cache config is as follows: CacheRoot /var/cache/apache2/ CacheDirLevels 3 CacheDirLength 2 CacheEnable disk /foo What is getting in the way of mod_cache doing its job of caching?

    Read the article

  • Somewhat powerful server needed for computationally expensive stuff

    - by Dane Larsen
    So here's my problem. My Dad runs a company that does some rather computationally expensive stuff. This is not supercomputer level stuff, but it does take several hours to run the average job on his Core i7 desktop. He asked me to look into a way to have his customers use the code on an hourly basis, namely via a server. Ideally he'd be able to buy a box for about $1000, and hook it right up to our home connection. Unfortunately, the data that needs to be both sent and received is on the order of several hundred megs. We live in a rural area, and the fastest connection offered is 1.5Mbit/s. Download. It's like .3Mbit/s upload. Not workable. What are the options for this kind of thing? Ideally, we'd have about 2GB of ram, 300-500GB of storage, and a nice dual core, and it has to run some flavor of Linux. Any suggestions? Thanks in advance EDIT: Also, ideally the monthly price would be < $100 per month.

    Read the article

  • Windows server 2008R2 routing with single NIC

    - by Fabian
    I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

    Read the article

  • How can I set up a local nameserver and modify DNS zones on it?

    - by Joe Hopfgartner
    This is a follow up to this question. I am having an issue with a Router that doesn't support hairpinning properly. See the link above for details. Now I want to set up a local DNS server that Hosts in our LAN can use to resolve public Hostnames (usual webbrowsing... ). Additionally I want to modify certain zones. In our LAN we have some servers serving resources that are not available in our public dns zone. We always have to configure our local LMHost files accordingly. For example we have a staging installation with a new feature running on a local Webserver, and we cannot access it with the IP directly because the website runs in a named virtual host container, we have to configure LMHost file to point some domain to the local IP address. And now we have also the Hair pinning issue. So my question is: What software can I use? Will bind do the job? I just need to insert some A entries into the zone. As easy as possible. We have local Linux/Ubuntu servers.

    Read the article

  • Postfix: Using google apps for stmp errors

    - by Zed Said
    I am using postfix and need to send the mail using google apps smtp. I am getting errors after I thought I had set everything up correctly: May 11 09:50:57 zedsaid postfix/error[22214]: 00E009693FB: to=<[email protected]>, relay=none, delay=2466, delays=2462/3.4/0/0.06, dsn=4.7.0, status=deferred (delivery temporarily suspended: SASL authentication failed; cannot authenticate to server smtp.gmail.com[74.125.155.109]: no mechanism available) May 11 09:50:57 zedsaid postfix/error[22213]: 0ACB36D1B94: to=<[email protected]>, relay=none, delay=2486, delays=2482/3.4/0/0.06, dsn=4.7.0, status=deferred (delivery temporarily suspended: SASL authentication failed; cannot authenticate to server smtp.gmail.com[74.125.155.109]: no mechanism available) May 11 09:50:57 zedsaid postfix/error[22232]: 067379693D3: to=<[email protected]>, relay=none, delay=2421, delays=2417/3.4/0/0.06, dsn=4.7.0, status=deferred (delivery temporarily suspended: SASL authentication failed; cannot authenticate to server smtp.gmail.com[74.125.155.109]: no mechanism available) main.cf: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = zedsaid.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = #relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all delay_warning_time = 4h smtpd_recipient_limit = 16 # how many error before back off. smtpd_soft_error_limit = 3 # how many max errors before blocking it. smtpd_hard_error_limit = 12 ## Gmail Relay relayhost = [smtp.gmail.com]:587 smtp_use_tls = yes smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = noanonymous smtp_sasl_tls_security_options = noanonymous smtp_sasl_mechanism_filter = login smtp_tls_eccert_file = smtp_tls_eckey_file = smtp_use_tls = yes smtp_enforce_tls = no smtp_tls_CAfile = /etc/postfix/cacert.pem smtpd_tls_received_header = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport debug_peer_list = smtp.gmail.com debug_peer_level = 3 What am I doing wrong?

    Read the article

  • CUPS causes printer to click and doesn't print

    - by Pez Cuckow
    I'm suffering a strange problem with my Cannon iP4850 when trying to use CUPS on a Raspberry Pi (this is not RPi specific, please do not vote to move it). When I plug the printer into my Laptop (OSX) or my Desktop W7 it identifies as a iP4800 and prints perfectly. So I plug it into the Pi (running debian), set it up in CUPS enable sharing and can now see the iP4800 series shared on the network. However if I print to it (using AirPrint etc...); the file gets to CUPS safely (shows in the queue) but when it tries to print the printer clicks (like a loud thunk) 3/4 times and then gives in, with a double amber flashing light. In cups it shows as job completed. Do you know why using the pi and cups would cause what appears to be a hardware fault and what I can do to fix the problem or to provide further debug info? Thanks for your time! Description: Canon iP4800 series Location: Lounge Driver: Canon PIXMA iP4800 - CUPS+Gutenprint v5.2.9 (color, 2-sided printing) Connection: usb://Canon/iP4800%20series?serial=2239B2 Note: I've tried deleting and re-adding the printer to the Laptop, Desktop and PI and the results are always the same Log for plugging in printer and printing (attempting to) something until the printer turned off again pi@pezpi /var/log $ dmesg [ 7284.176336] usb 1-1.2: new high speed USB device number 8 using dwc_otg [ 7284.279703] usb 1-1.2: New USB device found, idVendor=04a9, idProduct=10d5 [ 7284.279750] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7284.279771] usb 1-1.2: Product: iP4800 series [ 7284.279786] usb 1-1.2: Manufacturer: Canon [ 7284.279800] usb 1-1.2: SerialNumber: 2239B2 Setting cups to verbose: Change loglevel in cupsd.conf to debug (or debug2) pi@pezpi /var/log $ sudo vim /etc/cups/cupsd.conf pi@pezpi /var/log $ sudo /etc/init.d/cups restart [ ok ] Restarting Common Unix Printing System: cupsd. pi@pezpi /var/log $ Log from $ /var/log/cups/error_log is at http://pastebin.com/7VZMRMrG (too large to post here) The log contains - in order (deleted the log and then did the beneath) Restarting the cups server Attempting to print a test page x2 Printing from 192.168.1.90 via AirPrint Printing from 192.168.1.90 via Network Print Turning the printer off and on again

    Read the article

  • Removing forward lookup zone broke our site - why?

    - by user102469
    I'm fairly new to the job and trying to get to grips with the infrastructure here. We've moved a site from being locally hosted on our own network to an external host (1&1). I've transferred the DNS hosting from the previous DNS host to 1&1 to keep things simple. Once everything had gone through, visitors that were external to our network were being directed to the new site on 1&1 but requests from within our network were still going to our own server. I noticed in the DNS server that there was a forward lookup zone for the site pointing to our own server still. My (admittedly simplistic) understanding was that pausing that zone would then cause the DNS server to get the address for the site from our external DNS servers and our users would start landing on our new site. However, what happened instead was that they were being met with "page not found" type errors. I've resolved it my modifying the forward lookup zone A record to point to the external web server but would like to get an understanding as to why pausing the zone didn't work. Would deleting the zone work? I am reluctant to try that as creating it again will not be as easy as simply pressing "start". Many thanks.

    Read the article

< Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >