start - Page 265 - Developer IT

Keyword Research - Why Bother?

"Every long journey, starts with a single step" says Confucius. And with every successful SEO campaign, one must start with proper keyword research. Keyword research is more than just knowing which keywords to use for a campaign, it also determines the direction of your campaign in relation to whatever key phrase you are targeting.

Read the article

Best development architecture for a small team of programmers ( WAMP Stack )

- by Tio

Hi all.. I'm in the first month of work in a new company.. and after I met the two programmer's and asked how things are organized in terms of projects inside the company, they simply shrug their shoulders, and said that nothing is organized.. I think my jaw hit the ground that same time.. ( I know some, of you think I should quit, but I'm on a privileged position, I'm the most experienced there, so there's room for me to grow inside the company, and I'm taking the high road ).. So I talked to the IT guy, and one of the programmers, and maybe this week I'm going to get a server all to myself to start organizing things. I've used various architectures in my previous work experiences, on one I was developing in a server on the network ( no source control of course ).. another experience I had was developing in my local computer, with no server on the network, just source control. And at home, I have a mix of the two, everything I code is on a server on the network, and I have those folders under source control, and I also have a no-ip account configured on that server so I can access it everywhere and I can show the clients anything. For me I think this last solution ( the one I have at home ) is the best: Network server with WAMP stack. The server as a public IP so we can access it by domain name. And use subdomains for each project. Everybody works directly on the network server. I think the problem arises, when two or more people want to work on the same project, in this case the only way to do this is by using source control and local repositories, this is great, but I think this turns development a lot more complicated. In the example I gave, to make a change to the code, I would simply need to open the file in my favorite editor, make the change, alter the database, check in the changes into source control and presto all done. Using local repositories, I would have to get the latest version, run the scripts on the local database to update it, alter the file, alter the database, check in the changes to the network server, update the database on the network server, see if everything is running well on the network server, and presto all done, to me this seems overcomplicated for a change on a simple php page. I could share the database for the local development and for the network server, that sure would help. Maybe the best way to do this is just simply: Network server with WAMP stack ( test server so to speak ), public server accessible trough the web. LAMP stack on every developer computer ( minus the database ) We develop locally, test, then check in the changes into the server test and presto. What do you think? Maybe I should start doing this at home.. Thanks and best regards... Edit: I'm sorry I made a mistake and switched WAMP with LAMP, sorry about that..

Read the article

How to detect collisions in AS3?

- by Gabriel Meono

I'm trying to make a simple game, when the ball falls into certain block, you win. Mechanics: The ball falls through several obstacles, in the end there are two blocks, if the ball touches the left block you win, the next level will contain more blocks and less space between them. Test the movie (click on the screen to drop the ball): http://gabrielmeono.com/downloads/Lucky_Hit_Alpha.swf These are the main variables: var winBox:QuickObject;//You win var looseBox:QuickObject;//You loose var gameBall:QuickObject;//Ball dropped Question: How do I trigger a collision function if the ball hits the winBox? (Win message/Next level) Thanks, here is the full code: package { import flash.display.MovieClip; import com.actionsnippet.qbox.*; import flash.events.MouseEvent; [SWF(width = 600, height = 600, frameRate = 60)] public class LuckyHit extends MovieClip { public var sim:QuickBox2D; var winBox:QuickObject; var looseBox:QuickObject; var gameBall:QuickObject; /** * Constructor */ public function LuckyHit() { sim = new QuickBox2D(this); //sim.createStageWalls(); winBox = sim.addBox({x:5,y:600/30, width:300/30, height:10/30, density:0}); looseBox = sim.addBox({x:15,y:600/30, width:300/30, height:10/30, density:0}); // make obstacles for (var i:int = 0; i<(stage.stageWidth/50); i++){ //End sim.addCircle({x:1 + i * 1.5, y:16, radius:0.1, density:0}); sim.addCircle({x:2 + i * 1.5, y:15, radius:0.1, density:0}); //Mid End sim.addCircle({x:0 + i * 2, y:14, radius:0.1, density:0}); sim.addCircle({x:0 + i * 2, y:13, radius:0.1, density:0}); sim.addCircle({x:0 + i * 2, y:12, radius:0.1, density:0}); sim.addCircle({x:0 + i * 2, y:11, radius:0.1, density:0}); sim.addCircle({x:0 + i * 2, y:10, radius:0.1, density:0}); //Middle Start sim.addCircle({x:0 + i * 1.5, y:09, radius:0.1, density:0}); sim.addCircle({x:1 + i * 1.5, y:08, radius:0.1, density:0}); sim.addCircle({x:0 + i * 1.5, y:07, radius:0.1, density:0}); sim.addCircle({x:1 + i * 1.5, y:06, radius:0.1, density:0}); } sim.start(); stage.addEventListener(MouseEvent.CLICK, _clicked); } /** * .. * @param e MouseEvent.CLICK */ private function _clicked(e:MouseEvent) { gameBall = sim.addCircle({x:(mouseX/30), y:(1), radius:0.25, density:5}); } } }

Read the article

I'd like to learn how to do mobile development - which competitions can I join to help me learn?

- by Oscar

I want to start learning mobile device development, but I am someone that gets much more motivated when there is some goal to reach. Because of that, I would like to join a competition. I know about Microsoft Imagine Cup, which is a very nice competition. Are there any another mobile development competition with a deadline in the next 6~8 months? I have been googling for them, but I could not find any, maybe someone knows about something that I couldn't find.

Read the article

[News] Tests robotis?s avec Selenium et xUnit

Dans ce billet, joel abrahamsson illustre un cas concret d'utilisation de l'outil de tests d'IHM, Selenium, avec C# : "I have really enjoyed playing around with Selenium and I?m quite sure that I will start using it at work as well. I?m also quite happy with how my tests work and how I handle starting Selenium Server and I hope that this post will prove useful to others as well"

Read the article

book and resource about vanilla OpenGL ES 2.0 development

- by user827992

I Found this book but it talks about an SDK created by the author rather than pure simple OpenGL ES 2.0; this sounds more like a commercial to me than a good book for programming, i would like to start with just OpenGL ES 2.0 without talking about anything else: can you give me a good advice on this? A good book or on-line resource. I'm also interested in cross platform development with OpenGL ES, in particular Android and iOS.

Read the article

Getting Ramped for Silverlight 4

- by GeekAgilistMercenary

Here is a quick walk through of setting up your Silverlight 4 development environment. The first assumed step is that you have Visual Studio 2010 already installed and any appropriate patches. Then download the following in order and install each. Silverlight 4 Tools RC2 for Visual Studio and Silverlight 4 RTW Expression Blend 4 Release Candidate Silverlight Toolkit - Not necessary, but lots of good bits in this download. WCF RIA Services - This is also not necessary, but you should grab it just in case anyway. Once each of these are installed jump into Visual Studio 2010. Start a new Silverlight 4 Project by going to File -> New -> Project -> and select the Silverlight Project Templates. Here you'll see a new list of projects that are specific to the above listed downloads. Silverlight Business Application WCF RIA Service Class Library Silverlight Unit Test Application One way to confirm (and what I am going to display here in this entry) Silverlight 4 is installed ok is to select the Silverlight Application Template and start a new project. On the next screen you will see some of the standard options. I always go with the ASP.NET MVC Option and with these new installations I am going to select Silverlight 4 (should be selected already) from the drop down and check the Enable WCF RIA Services check box. I also, for good measure, always create a unit test project for the ASP.NET MVC Project that will host the Silverlight Application Project. When all is setup, the Solutions Explorer should look like what is shown below. Add the following code to the XAML of the MainPage.xaml of the Silverlight Project. <UserControl x:Class="Silverlight4.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400"> <Grid x:Name="LayoutRoot" Background="White"> <TextBlock x:Name="textBlockTest" Text="Hello World!" /> </Grid> </UserControl> Now execute the project, if all runs well you have installed Silverlight 4 successfully. Bam! Silverlight 4 ready to go! I will have more on Silverlight 4 very soon, as I will be starting a project (personal) and blogging it as I work through it. Also, if you run into any issues I would like to read about them, so please comment. I had a few issues and also had some design time rendering issues in the VS 2010 IDE when I installed these bits at first. Check out the original entry here.

Read the article

SharePoint 2010 Hosting - ASPHostPortal :: Installing SSRS 2008 R2 on SharePoint 2010

- by mbridge

What do you need first? Please download SQL Server® 2008 R2 November CTP Reporting Services Add-in for Microsoft SharePoint® Technologies 2010 and please follow this steps: 1. Install a SharePoint technology instance. (Already did this when installing PowerPivot with SharePoint) 2. Install SQL Server 2008 R2 November CTP Reporting Services and specify that the report server use SharePoint Integrated mode 3. Configure Reporting Services 4. Download the Reporting Services Add-in by clicking the rsSharePoint.msi link later on this page. To start the installation immediately, click Run After installing Reporting services and the add-in your reporting server is ready to be integrated with SharePoint, in SharePoint 2010 we have some new admin screens. To integrate go to central admin, general application settings: When you successfully installed the add-in a reporting services icon will be there. Click Reporting Services Integration: Add the report server web service url (To get the URL, open the Reporting Services Configuration tool, connect to the report server, and click Web Service URL. Click the URL to verify it works. Copy the URL and paste it into Report Server Web Service URL.), select your authentication mode (windows authentication is prefered). Add a username and password of your admin account. Click ok to configure and start the integration. After the installation you can set the reporting services default. What is changed in SP2010 is that there isn’t a report library available. You have to add content types to a default library. So go to a site collection, site actions, View all site content. Create a Asset library: Now we have to make sure we can add reports to the library. To do this we have to add content types: Open the library, click on library tools, library settings, Under Content Types, click Add from existing site content types. In the Select Content Types section, in Select site content types from, click the arrow to select Reporting Services. In the Available Site Content Types list, click Report Builder, Report Data Source and Report and then click Add to move the selected content type to the Content types to add list. Now we are ready to upload reports and execute them from within our webparts: Another interesting post: - Integrating SharePoint 2010 and SQL 2008 R2

Read the article

T-SQL Tuesday #31 - Logging Tricks with CONTEXT_INFO

- by Most Valuable Yak (Rob Volk)

This month's T-SQL Tuesday is being hosted by Aaron Nelson [b | t], fellow Atlantan (the city in Georgia, not the famous sunken city, or the resort in the Bahamas) and covers the topic of logging (the recording of information, not the harvesting of trees) and maintains the fine T-SQL Tuesday tradition begun by Adam Machanic [b | t] (the SQL Server guru, not the guy who fixes cars, check the spelling again, there will be a quiz later). This is a trick I learned from Fernando Guerrero [b | t] waaaaaay back during the PASS Summit 2004 in sunny, hurricane-infested Orlando, during his session on Secret SQL Server (not sure if that's the correct title, and I haven't used parentheses in this paragraph yet). CONTEXT_INFO is a neat little feature that's existed since SQL Server 2000 and perhaps even earlier. It lets you assign data to the current session/connection, and maintains that data until you disconnect or change it. In addition to the CONTEXT_INFO() function, you can also query the context_info column in sys.dm_exec_sessions, or even sysprocesses if you're still running SQL Server 2000, if you need to see it for another session. While you're limited to 128 bytes, one big advantage that CONTEXT_INFO has is that it's independent of any transactions. If you've ever logged to a table in a transaction and then lost messages when it rolled back, you can understand how aggravating it can be. CONTEXT_INFO also survives across multiple SQL batches (GO separators) in the same connection, so for those of you who were going to suggest "just log to a table variable, they don't get rolled back": HA-HA, I GOT YOU! Since GO starts a new batch all variable declarations are lost. Here's a simple example I recently used at work. I had to test database mirroring configurations for disaster recovery scenarios and measure the network throughput. I also needed to log how long it took for the script to run and include the mirror settings for the database in question. I decided to use AdventureWorks as my database model, and Adam Machanic's Big Adventure script to provide a fairly large workload that's repeatable and easily scalable. My test would consist of several copies of AdventureWorks running the Big Adventure script while I mirrored the databases (or not). Since Adam's script contains several batches, I decided CONTEXT_INFO would have to be used. As it turns out, I only needed to grab the start time at the beginning, I could get the rest of the data at the end of the process. The code is pretty small: declare @time binary(128)=cast(getdate() as binary(8)) set context_info @time ... rest of Big Adventure code ... go use master; insert mirror_test(server,role,partner,db,state,safety,start,duration) select @@servername, mirroring_role_desc, mirroring_partner_instance, db_name(database_id), mirroring_state_desc, mirroring_safety_level_desc, cast(cast(context_info() as binary(8)) as datetime), datediff(s,cast(cast(context_info() as binary(8)) as datetime),getdate()) from sys.database_mirroring where db_name(database_id) like 'Adv%'; I declared @time as a binary(128) since CONTEXT_INFO is defined that way. I couldn't convert GETDATE() to binary(128) as it would pad the first 120 bytes as 0x00. To keep the CAST functions simple and avoid using SUBSTRING, I decided to CAST GETDATE() as binary(8) and let SQL Server do the implicit conversion. It's not the safest way perhaps, but it works on my machine. :) As I mentioned earlier, you can query system views for sessions and get their CONTEXT_INFO. With a little boilerplate code this can be used to monitor long-running procedures, in case you need to kill a process, or are just curious how long certain parts take. In this example, I added code to Adam's Big Adventure script to set CONTEXT_INFO messages at strategic places I want to monitor. (His code is in UPPERCASE as it was in the original, mine is all lowercase): declare @msg binary(128) set @msg=cast('Altering bigProduct.ProductID' as binary(128)) set context_info @msg go ALTER TABLE bigProduct ALTER COLUMN ProductID INT NOT NULL GO set context_info 0x0 go declare @msg1 binary(128) set @msg1=cast('Adding pk_bigProduct Constraint' as binary(128)) set context_info @msg1 go ALTER TABLE bigProduct ADD CONSTRAINT pk_bigProduct PRIMARY KEY (ProductID) GO set context_info 0x0 go declare @msg2 binary(128) set @msg2=cast('Altering bigTransactionHistory.TransactionID' as binary(128)) set context_info @msg2 go ALTER TABLE bigTransactionHistory ALTER COLUMN TransactionID INT NOT NULL GO set context_info 0x0 go declare @msg3 binary(128) set @msg3=cast('Adding pk_bigTransactionHistory Constraint' as binary(128)) set context_info @msg3 go ALTER TABLE bigTransactionHistory ADD CONSTRAINT pk_bigTransactionHistory PRIMARY KEY NONCLUSTERED(TransactionID) GO set context_info 0x0 go declare @msg4 binary(128) set @msg4=cast('Creating IX_ProductId_TransactionDate Index' as binary(128)) set context_info @msg4 go CREATE NONCLUSTERED INDEX IX_ProductId_TransactionDate ON bigTransactionHistory(ProductId,TransactionDate) INCLUDE(Quantity,ActualCost) GO set context_info 0x0 This doesn't include the entire script, only those portions that altered a table or created an index. One annoyance is that SET CONTEXT_INFO requires a literal or variable, you can't use an expression. And since GO starts a new batch I need to declare a variable in each one. And of course I have to use CAST because it won't implicitly convert varchar to binary. And even though context_info is a nullable column, you can't SET CONTEXT_INFO NULL, so I have to use SET CONTEXT_INFO 0x0 to clear the message after the statement completes. And if you're thinking of turning this into a UDF, you can't, although a stored procedure would work. So what does all this aggravation get you? As the code runs, if I want to see which stage the session is at, I can run the following (assuming SPID 51 is the one I want): select CAST(context_info as varchar(128)) from sys.dm_exec_sessions where session_id=51 Since SQL Server 2005 introduced the new system and dynamic management views (DMVs) there's not as much need for tagging a session with these kinds of messages. You can get the session start time and currently executing statement from them, and neatly presented if you use Adam's sp_whoisactive utility (and you absolutely should be using it). Of course you can always use xp_cmdshell, a CLR function, or some other tricks to log information outside of a SQL transaction. All the same, I've used this trick to monitor long-running reports at a previous job, and I still think CONTEXT_INFO is a great feature, especially if you're still using SQL Server 2000 or want to supplement your instrumentation. If you'd like an exercise, consider adding the system time to the messages in the last example, and an automated job to query and parse it from the system tables. That would let you track how long each statement ran without having to run Profiler. #TSQL2sDay

Read the article

Oracle ADF Essentials & ADF training material now on the iPad By Grant Ronald

- by JuergenKress

Faster and Simpler Java-based Application Development - Now Free Oracle ADF Essentials is an end-to-end Java EE framework that simplifies application development by providing out-of-the-box infrastructure services and a visual and declarative development experience. Oracle ADF Essentials is free to develop and deploy. Oracle ADF Essentials Overview Demo Tutorial - Using Oracle ADF Essentials with JPA/EJB and JSF Oracle ADF Essentials FAQ Introduction to Oracle ADF Seminar Tutorial - Developing with Oracle ADF Essentials ADF training material now on the iPad By Grant Ronald My team has developed about a weeks worth of ADF training material under the title ADF Insider and ADF Insider Essentials. This is available from our page on OTN. But we are now loading all our content on YouTube as well so the content can now be accessed on iPads. Over the next couple of weeks we'll also add these YouTube links to the OTN page but in the meantime, if you have an interest in ADF I strongly urge you to subscribe to our ADFInsiderEssentials YouTube Channel so you can be alerted when new content comes on line. Please also provide your comments, thumbs up/down, and let us know what content/topics is of your interest. GlassFish Extension for Oracle JDeveloper by Shay Shmeltzer We just release a new version of Oracle JDeveloper - 11.1.2.3. One new feature here is built-in support for GlassFish. This include the ability to create an "application server" connection to GlassFish and then deploy to that server with one click from inside JDeveloper. You can use this for deploying Oracle ADF Essentials application on Glassfish, but you can also use it to deploy any Java EE application you build in JDeveloper on GlassFish. However, if you are planning to work with GlassFish and JDeveloper on a more regular basis as your development server, then you might find my new extension useful. The new extension allows you to start and stop an external GlassFish instance, as well as start it in debug mode (which will allow JDeveloper to remotely debug your application as it runs on the server. I also added a button that will invoke the web admin console of Glassfish. Here is a quick demo that will show you how to work with the extension. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: adf training,adf,grant Ronald,adf essential,WebLogic Community,Oracle,OPN,Jürgen Kress

Read the article

EPM 11.1.2 - R&A DATABASE CONNECTIONS DISAPPEAR FROM THE "DATABASE CONNECTION MANAGER

- by Powder

When accessing the database connection panel through Reporting and Analysis all previously entered database connection do not appear. This is due to a bug in the Windows SMB2 protocol. To work around this bug you have to disable the protocol. On Windows 2008 the protocol is automatically enabled. This needs to be done on both the servers and the clients. Note that “server” is the server which hosts RAF repository service and RM1 folder, “client” – server which hosts replicated Repository service that accesses repository files via network i.e. \\<server_host>\RM1 In order to disable SMB 2.0 on the server side, follow these steps: 1. Run "regedit" on Windows Server 2008 based computer. 2. Expand and locate the sub tree as follows. HKLM\System\CurrentControlSet\Services\LanmanServer\Parameters 3. Add a new REG_DWORD key with the name of "Smb2" (without quotation mark) Value name: Smb2 Value type: REG_DWORD 0 = disabled 1 = enabled 4. Set the value to 0 to disable SMB 2.0, or set it to 1 to re-enable SMB 2.0. 5. Reboot the server. To disable SMB 2.0 for Windows Vista or Windows Server 2008 systems that are the “client” systems run the following commands: sc config lanmanworkstation depend= bowser/mrxsmb10/nsi sc config mrxsmb20 start= disabled Note there's an extra " " (space) after the "=" sign. To enable back SMB 2.0 for Windows Vista or Windows Server 2008 systems that are the “client” systems run the following commands: sc config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi sc config mrxsmb20 start= auto Again, note there's an extra " " (space) after the "=" sign.

Read the article

remap an xml feed to the address of a wordpress rss feed

- by cboettig

I used to have a blog based on Wordpress and moved to one based on Jekyll. I can create a new feed in Jekyll by building an atom page in XML with a bit of Liquid code, like this The trouble is, the location of the new feed is http://carlboettiger.info/atom.xml, while the old feed from the wordpress site is http://carlboettiger.info/feed, with no extension. how can I configure the Jekyll-created feed such that followers who have pointed their readers to the old feed address from wordpress will start to get the new content? (Site's Jekyll source here)

Read the article

Hard drive mounted at / , duplicate mounted hard drive after using MountManager

- by HellHarvest

possible duplicate post I'm running 12.04 64bit. My system is a dual boot for both Ubuntu and Windows7. Both operating systems are sharing the drive named "Elements". My volume named "Elements" is a 1TB SATA NTFS hard drive that shows up twice in the side bar in nautilus. One of the icons is functional and even has the convenient "eject" icon next to it. Below is a picture of the left menu in Nautilus, with System Monitor-File Systems tab open on top of it. Can someone advise me about how to get rid of this extra icon? I think the problem is much more deep-rooted than just a GUI glitch on Nautilus' part. The other icon does nothing but spit out the following error when I click on it (image below). This only happened AFTER I tried using Mount Manager to automate mounting the drive at start up. I've already uninstalled Mount Manager, and restarted, but the problem didn't go away. The hard drive does mount automatically now, so I guess that's cool. But now, every time I boot up now and open Nautilus, BOTH of these icons appear, one of which is fictitious and useless. According to the image above and the outputs of several other commands, it appears to be mounted at / In which case, no matter where I am in Nautilus when I try to click on that icon, of course it will tell me that that drive is in use by another program... Nautilus. I'm afraid of trying to unmount this hard drive (sdb6) because of where it appears to be mounted. I'm kind of a noob, and I have this gut feeling that tells me trying to unmount a drive at / will destroy my entire file system. This fear was further strengthened by the output of "$ fsck" at the very bottom of this post. Error immediately below when that 2nd "Elements" hard drive is clicked in Nautilus: Unable to mount Elements Mount is denied because the NTFS volume is already exclusively opened. The volume may be already mounted, or another software may use it which could be identified for example by the help of the 'fuser' command. It's odd to me that that error message above claims that it's an NTFS volume when everything else tell me that it's an ext4 volume. The actual hard drive "Elements" is in fact an NTFS volume. Here's the output of a few commands and configuration files that may be of interest: $ fuser -a / /: 2120r 2159rc 2160rc 2172r 2178rc 2180rc 2188r 2191rc 2200rc 2203rc 2205rc 2206r 2211r 2212r 2214r 2220r 2228r 2234rc 2246rc 2249rc 2254rc 2260rc 2261r 2262r 2277rc 2287rc 2291rc 2311rc 2313rc 2332rc 2334rc 2339rc 2343rc 2344rc 2352rc 2372rc 2389rc 2422r 2490r 2496rc 2501rc 2566r 2573rc 2581rc 2589rc 2592r 2603r 2611rc 2613rc 2615rc 2678rc 2927r 2981r 3104rc 4156rc 4196rc 4206rc 4213rc 4240rc 4297rc 5032rc 7609r 7613r 7648r 9593rc 18829r 18833r 19776r $ sudo df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb6 496G 366G 106G 78% / udev 2.0G 4.0K 2.0G 1% /dev tmpfs 791M 1.5M 790M 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.0G 672K 2.0G 1% /run/shm /dev/sda1 932G 312G 620G 34% /media/Elements /home/solderblob/.Private 496G 366G 106G 78% /home/solderblob /dev/sdb2 188G 100G 88G 54% /media/A2B24EACB24E852F /dev/sdb1 100M 25M 76M 25% /media/System Reserved $ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00093cab Device Boot Start End Blocks Id System /dev/sda1 2048 1953519615 976758784 7 HPFS/NTFS/exFAT Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d9b Device Boot Start End Blocks Id System /dev/sdb1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sdb2 206848 392378768 196085960+ 7 HPFS/NTFS/exFAT /dev/sdb3 392380414 1465147391 536383489 5 Extended /dev/sdb5 1456762880 1465147391 4192256 82 Linux swap / Solaris /dev/sdb6 392380416 1448374271 527996928 83 Linux /dev/sdb7 1448376320 1456758783 4191232 82 Linux swap / Solaris Partition table entries are not in disk order $ cat /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> UUID=77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e / ext4 defaults 0 1 UUID=F6549CC4549C88CF /media/Elements ntfs-3g users 0 0 $ sudo blkid /dev/sda1: LABEL="Elements" UUID="F6549CC4549C88CF" TYPE="ntfs" /dev/sdb1: LABEL="System Reserved" UUID="5CDE130FDE12E156" TYPE="ntfs" /dev/sdb2: UUID="A2B24EACB24E852F" TYPE="ntfs" /dev/sdb6: UUID="77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e" TYPE="ext4" $ sudo blkid -c /dev/null (appears to be exactly the same as above) /dev/sda1: LABEL="Elements" UUID="F6549CC4549C88CF" TYPE="ntfs" /dev/sdb1: LABEL="System Reserved" UUID="5CDE130FDE12E156" TYPE="ntfs" /dev/sdb2: UUID="A2B24EACB24E852F" TYPE="ntfs" /dev/sdb6: UUID="77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e" TYPE="ext4" $ mount /dev/sdb6 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /media/Elements type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) /home/solderblob/.Private on /home/solderblob type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=76a47b0175afa48d,ecryptfs_fnek_sig=391b2d8b155215f7) gvfs-fuse-daemon on /home/solderblob/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=solderblob) /dev/sdb2 on /media/A2B24EACB24E852F type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) /dev/sdb1 on /media/System Reserved type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) $ ls -a . A2B24EACB24E852F Ubuntu 12.04.1 LTS amd64 .. Elements System Reserved $ cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=2013000k,nr_inodes=503250,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=809872k,mode=755 0 0 /dev/disk/by-uuid/77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e / ext4 rw,relatime,user_xattr,acl,barrier=1,data=ordered 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 /dev/sda1 /media/Elements fuseblk rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 /home/solderblob/.Private /home/solderblob ecryptfs rw,relatime,ecryptfs_fnek_sig=391b2d8b155215f7,ecryptfs_sig=76a47b0175afa48d,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs 0 0 gvfs-fuse-daemon /home/solderblob/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/sdb2 /media/A2B24EACB24E852F fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 /dev/sdb1 /media/System\040Reserved fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 gvfs-fuse-daemon /root/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=0,group_id=0 0 0 $ fsck fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) /dev/sdb6 is mounted. WARNING!!! The filesystem is mounted. If you continue you ***WILL*** cause ***SEVERE*** filesystem damage. Do you really want to continue<n>? no check aborted.

Read the article

Automatic login vs. manual login and screensaver lock

- by Erik Johansson

Is there a way to prevent a command from running when I login manually, but having it run when the computer starts up and GDM automatically logs me in. This is the setup: in the Gnome "on start programs" settings I have a command that locks the screen gnome-screensaver-command -l I have automatic login turned on. That means that the screen will be locked when I turn on the computer, but it will also be locked when I manually login from GDM, is there a way to prevent this?

Read the article

Working With Extended Events

- by Fatherjack

SQL Server 2012 has made working with Extended Events (XE) pretty simple when it comes to what sessions you have on your servers and what options you have selected and so forth but if you are like me then you still have some SQL Server instances that are 2008 or 2008 R2. For those servers there is no built-in way to view the Extended Event sessions in SSMS. I keep coming up against the same situations – Where are the xel log files? What events, actions or predicates are set for the events on the server? What sessions are there on the server already? I got tired of this being a perpetual question and wrote some TSQL to save as a snippet in SQL Prompt so that these details are permanently only a couple of clicks away. First, some history. If you just came here for the code skip down a few paragraphs and it’s all there. If you want a little time to reminisce about SQL Server then stick with me through the next paragraph or two. We are in a bit of a cross-over period currently, there are many versions of SQL Server but I would guess that SQL Server 2008, 2008 R2 and 2012 comprise the majority of installations. With each of these comes a set of management tools, of which SQL Server Management Studio (SSMS) is one. In 2008 and 2008 R2 Extended Events made their first appearance and there was no way to work with them in the SSMS interface. At some point the Extended Events guru Jonathan Kehayias (http://www.sqlskills.com/blogs/jonathan/) created the SQL Server 2008 Extended Events SSMS Addin which is really an excellent tool to ease XE session administration. This addin will install in SSMS 2008 or 2008R2 but not SSMS 2012. If you use a compatible version of SSMS then I wholly recommend downloading and using it to make your work with XE much easier. If you have SSMS 2012 installed, and there is no reason not to as it will let you work with all versions of SQL Server, then you cannot install this addin. If you are working with SQL Server 2012 then SSMS 2012 has built in functionality to manage XE sessions – this functionality does not apply for 2008 or 2008 R2 instances though. This means you are somewhat restricted and have to use TSQL to manage XE sessions on older versions of SQL Server. OK, those of you that skipped ahead for the code, you need to start from here: So, you are working with SSMS 2012 but have a SQL Server that is an earlier version that needs an XE session created or you think there is a session created but you aren’t sure, or you know it’s there but can’t remember if it is running and where the output is going. How do you find out? Well, none of the information is hidden as such but it is a bit of a wrangle to locate it and it isn’t a lot of code that is unlikely to remain in your memory. I have created two pieces of code. The first examines the SYS.Server_Event_… management views in combination with the SYS.DM_XE_… management views to give the name of all sessions that exist on the server, regardless of whether they are running or not and two pieces of TSQL code. One piece will alter the state of the session: if the session is running then the code will stop the session if executed and vice versa. The other piece of code will drop the selected session. If the session is running then the code will stop it first. Do not execute the DROP code unless you are sure you have the Create code to hand. It will be dropped from the server without a second chance to change your mind. /**************************************************************/ /*** To locate and describe event sessions on a server ***/ /*** ***/ /*** Generates TSQL to start/stop/drop sessions ***/ /*** ***/ /*** Jonathan Allen - @fatherjack ***/ /*** June 2013 ***/ /*** ***/ /**************************************************************/ SELECT [EES].[name] AS [Session Name - all sessions] , CASE WHEN [MXS].[name] IS NULL THEN ISNULL([MXS].[name], 'Stopped') ELSE 'Running' END AS SessionState , CASE WHEN [MXS].[name] IS NULL THEN ISNULL([MXS].[name], 'ALTER EVENT SESSION [' + [EES].[name] + '] ON SERVER STATE = START;') ELSE 'ALTER EVENT SESSION [' + [EES].[name] + '] ON SERVER STATE = STOP;' END AS ALTER_SessionState , CASE WHEN [MXS].[name] IS NULL THEN ISNULL([MXS].[name], 'DROP EVENT SESSION [' + [EES].[name] + '] ON SERVER; -- This WILL drop the session. It will no longer exist. Don't do it unless you are certain you can recreate it if you need it.') ELSE 'ALTER EVENT SESSION [' + [EES].[name] + '] ON SERVER STATE = STOP; ' + CHAR(10) + '-- DROP EVENT SESSION [' + [EES].[name] + '] ON SERVER; -- This WILL stop and drop the session. It will no longer exist. Don't do it unless you are certain you can recreate it if you need it.' END AS DROP_Session FROM [sys].[server_event_sessions] AS EES LEFT JOIN [sys].[dm_xe_sessions] AS MXS ON [EES].[name] = [MXS].[name] WHERE [EES].[name] NOT IN ( 'system_health', 'AlwaysOn_health' ) ORDER BY SessionState GO I have excluded the system_health and AlwaysOn sessions as I don’t want to accidentally execute the drop script for these sessions that are created as part of the SQL Server installation. It is possible to recreate the sessions but that is a whole lot of aggravation I’d rather avoid. The second piece of code gathers details of running XE sessions only and provides information on the Events being collected, any predicates that are set on those events, the actions that are set to be collected, where the collected information is being logged and if that logging is to a file target, where that file is located. /**********************************************/ /*** Running Session summary ***/ /*** ***/ /*** Details key values of XE sessions ***/ /*** that are in a running state ***/ /*** ***/ /*** Jonathan Allen - @fatherjack ***/ /*** June 2013 ***/ /*** ***/ /**********************************************/ SELECT [EES].[name] AS [Session Name - running sessions] , [EESE].[name] AS [Event Name] , COALESCE([EESE].[predicate], 'unfiltered') AS [Event Predicate Filter(s)] , [EESA].[Action] AS [Event Action(s)] , [EEST].[Target] AS [Session Target(s)] , ISNULL([EESF].[value], 'No file target in use') AS [File_Target_UNC] -- select * FROM [sys].[server_event_sessions] AS EES INNER JOIN [sys].[dm_xe_sessions] AS MXS ON [EES].[name] = [MXS].[name] INNER JOIN [sys].[server_event_session_events] AS [EESE] ON [EES].[event_session_id] = [EESE].[event_session_id] LEFT JOIN [sys].[server_event_session_fields] AS EESF ON ( [EES].[event_session_id] = [EESF].[event_session_id] AND [EESF].[name] = 'filename' ) CROSS APPLY ( SELECT STUFF(( SELECT ', ' + sest.name FROM [sys].[server_event_session_targets] AS SEST WHERE [EES].[event_session_id] = [SEST].[event_session_id] FOR XML PATH('') ), 1, 2, '') AS [Target] ) AS EEST CROSS APPLY ( SELECT STUFF(( SELECT ', ' + [sesa].NAME FROM [sys].[server_event_session_actions] AS sesa WHERE [sesa].[event_session_id] = [EES].[event_session_id] FOR XML PATH('') ), 1, 2, '') AS [Action] ) AS EESA WHERE [EES].[name] NOT IN ( 'system_health', 'AlwaysOn_health' ) /*Optional to exclude 'out-of-the-box' traces*/ I hope that these scripts are useful to you and I would be obliged if you would keep my name in the script comments. I have no problem with you using it in production or personal circumstances, however it has no warranty or guarantee. Don’t use it unless you understand it and are happy with what it is going to do. I am not ever responsible for the consequences of executing this script on your servers.

Read the article

Reasons to Use a VM For Development

- by George Stocker

Background: I work at a start-up company, where one team uses Virtual Machines to connect to a remote server to do their development, and another team (the team I'm on) uses local IIS/SQL Server 2005/Visual Studio installations to conduct work. Team VM is located about 1000 miles from Team Non-VM, and the servers the VMs run off of are located near Team VM (Latency, for those that are wondering, is about 50ms). A person high in the company is pushing for Team Non-VM to use virtual machines for programming, development, and testing. The latter point we agree on -- we want Virtual Machines to test configurations and various aspects of the web application in a 'clean' state. The Problem: What we don't agree on is having developers using RDP to connect to a desktop remotely that contains Visual Studio, SQL Server, and IIS to do the same development we could do locally on our laptops. I've tried the VM set-up, and besides the color issue, there is a latency issue that is rather noticeable, not to mention that since we're a start-up, a good number of employees work from home on occasion with our work laptops, and this move would cut off the laptops. They'd be turned in. Reasons to Use Remote VMs for Development (Not Testing!): Here are the stated reasons that this person wants us to use VMs: They work for TeamVM. They keep the source code "safe". If we want to work from home, we could just use our home PCs. Licenses (I don't know what the argument is, only that it's been used). Reasons not to use Remote VMs for Development: Here are the stated reasons why we don't want to use VMs: We like working from home. We get a lot done on our own time. We're not going to use our Home PCs to do work related stuff. The Latency is noticeable. Support for the VMs (if they go down, or if we need a new VM) takes a while. We don't have administrative privileges on the VM, and are unable to change settings as needed. What I'm looking for from the community is this: What reasons would you give for not using VMs for development? Keep in mind these are remote VMs -- this isn't a VM running on a local desktop. It's using the laptop (or a desktop) as a thin client for a remote VM. Also, on the other side of the coin: Is there something we're missing that makes VMs more palatable for development? Edit: I think 'safe' is used in term of corporate espionage, or more correctly if the Laptop gets stolen, the person who stole would have access to our source code. The former (as we've pointed out, is always going to be a possibility -- companies stop that with litigation, there isn't a technical solution (so far as I can see)). The latter point is ( though I don't know its usefulness in a corporate scenario) mitigated by Truecrypt'ing the entire volume.

Read the article

shotwell 0.12 shared library error

- by blade19899

i installed shotwell 0.12 like so via its official ppa sudo add-apt-repository ppa:yorba/ppa sudo apt-get update sudo apt-get install shotwell and when i tried to run it via dash it didn't start. i then typed in the gnome-terminal "shotwell" I then got this error error while loading shared libraries: libgexiv2.so.0: cannot open shared object file: No such file or directory my question is how to get shotwell 0.12 up and running in ubuntu 11.10 amd64

Read the article

Stop Office 2010 Upload Center Icon from Displaying in the Taskbar

- by Mysticgeek

One of the new features in Office 2010 is the ability to upload your files to Office Web Apps. When you do, an Upload Center icon appears in the Taskbar and helps manage documents. Here’s how to stop it from showing up. If you’re running Office 2010 and upload files to the web, you’ll notice the Microsoft Office Upload Center Icon appears on the Taskbar in the Notification Area. It will stay there even after you’re done uploading the document and closed out of all Office apps. You can use this to monitor and control the documents you’re uploading to the web. Getting rid of it is fairly simple. Right-click the icon and select Settings. When the Microsoft Office Upload Center Settings window appears, under Display Options, uncheck Display icon in notification area and click OK. That is all there is to it…now it will no longer appear in the Taskbar. After you upload your first document, it will also want to startup with Windows. You can go into msconfig and disable it from automatically starting up. If you need to access it again, it’s part of Office 2010 Tools which you can access from the Start Menu. Or you can type upload center into the Search box in the Start Menu and hit Enter. If you upload a lot of work to Microsoft Web Apps you might find this tool useful, but if you only occasionally upload docs, you might be annoyed by it always being in the Taskbar. Similar Articles Productive Geek Tips Manage Sending 2010 Documents to the Web with Office Upload CenterHow To Manage Action Center in Windows 7What is Mobsync.exe and Why Is It Running?Taskbar Eliminator Does What the Name Implies: Hides Your Windows TaskbarDisable Office 2010 Beta Send-a-Smile from Startup TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar

Read the article

Getting Started with Active Directory Rights Management Services for Exchange 2010

With security concerns being a constant litany, it's worth considering Active Directory Rights Management Services as a powerful tool in your access-control arsenal, particularly when it integrates so neatly with Exchange 2010. Elie Bou Issa kindly takes us, step by step, through everything we need to know to install and start using this versatile technology like a pro.

Read the article

Faut-il faire des études supérieures pour être un bon développeur ? Non, d'après les fondateurs de 37signals

Faut-il faire des études supérieures pour être un bon développeur ? Non d'après les fondateurs de 37signals « Oubliez la formation conventionnelle », peut-on lire en grand titre sur le best-seller « Rework », écrit par Jason Fried et David H. Hanson. Dans ce chapitre d'un livre atypique qui inspire depuis sa sortie de nombreux entrepreneurs et start-ups, les deux fondateurs de 37signals se moquent ouvertement les recruteurs qui exigent aux prétendants à leurs postes des diplômes uni...

Read the article

Gnome Do does not autostart and save shortcuts

- by Matt

For some reason the autostart of Gnome-Do will not work in 11.10. I've installed Gnome-Do via the Ubuntu Software Center. Then I changed the shortcut to launch Gnome-Do and marked the option to autostart Gnome-Do within Gnome-Do. In order to verify the autostart, I checked whether it's also found in the autostart applications (which it was). However, upon every restart I have to start Gnome-Do manually via the unity launcher and change the shortcut again.

Read the article

Stairway to MDX - STEP 1: Getting Started with MDX

To learn MDX, there is really no alternative to installing the system and trying out the statements, and experimenting. William Pearson, the well-known expert on MDX, kicks off a stairway series on this important topic by getting you running from a standing start. NEW! SQL Monitor 2.0Monitor SQL Server Central's servers withRed Gate's new SQL Monitor.No installation required. Find out more.

Read the article

Is an xml sitemap good or bad [closed]

- by Frederik Heyninck

Possible Duplicate: Are there any clear indicators that my sitemap file is beneficial? The good: You provide search engines with all the urls in your site But, does the search engine search further than the provided urls in the xml site map? If you have a website with a forum does every post need to be in the sitemap? What if remove the sitemap afterwords, will the search engine need to start over?

Read the article

Adobe Reader crashes immediately after starting

- by Tanveer Hossain

I'm running ubuntu 12.04 32 bit system. I installed adobe reader through software center but when click on the icon to start acroread it immediately crashes during showing splash window. I've also tried using terminal running command "acroread" but no gain. It even doesn't show any error massage. It should be noted that to solve the problem i've installed lsb module and ia32-libs. But my problem is not solved.

Read the article

Emphasize Some Comments - but not Dirty the Code

- by Jon Sandness

I'm having trouble structuring my comments at the moment. I have major sections of the code that, when scrolling through the document, I want to be able to see those stand out. Examples: This is a normal comment: int money = 100; //start out with 100 money - This is a comment to emphasize a certain part of the code: /****** Set up all the money ******/ But I don't like that this isn't very clean. Is there a standard way of setting up this type of a comment?

Search Results

Search found 28784 results on 1152 pages for 'start'.

Page 265/1152 | < Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272 | Next Page >

- by Tio

- by Gabriel Meono

- by Oscar

- by user827992

- by GeekAgilistMercenary

- by mbridge

- by Most Valuable Yak (Rob Volk)

- by JuergenKress

- by Powder

- by cboettig

- by HellHarvest

- by Erik Johansson

- by Fatherjack

- by George Stocker

- by blade19899

- by Mysticgeek

- by Matt

- by Frederik Heyninck

- by Tanveer Hossain

- by Jon Sandness

< Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272 | Next Page >