Search Results

Search found 9462 results on 379 pages for 'three tier'.

Page 265/379 | < Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >

• Replacing stock Core 2 Duo heatsink fan (just the fan really) with a Dell CPU fan

  - by user647345

  My old heatsink fan broke and I'm trying to reconnect its plugs to a new fan. My Dell CPU fan has some custom Dell plug. I snipped the old fan's wire in half and kept the plug on the end of it. I want to connect it to the Dell fan wire to the plug. The motherboard is a P5Q-e, the stock Core 2 Duo fan was .20A and the dell is .70A. Is that going to matter? The wire from the fan has four wires, the wire with the plug has four wires. They share three, of the four colors: red, black, and blue. Dell's fourth wire is white, while the plug's fourth wire is yellow. Is it safe to assume that I just connect the yellow and the white plug together and match the rest up? I don't want to take any risk of damaging anything. It runs fine passively without a fan, but I have speedstep on, so I would like to use this fan and just fasten it to the heatsink with some twist ties and paperclips and call it a day.

  Read the article

• How can I safely close this window and forever avoid seeing similar pop-ups from Mackeeper Zeobit's malware and spyware?

  - by Michael Prescott

  The attached image shows a window that just popped up and the only button available is the OK button. I could Force quit Safari, but I've got several sites open right now and don't want to try and find my place again. Besides, I've seen similar hacks in the past and I'd like to learn how to handle them in a way better than just a brute force-quit. I've never heard of MacKeeper or Zeobit, so I opened Firefox and did a few searches while Safari is obviously still stuck, waiting for me to click the sneaky OK button in the dialog window. Anyhow, at least the first few pages of most search results contain lots of blabbering from questionable witnesses about how MacKeeper saved them from some malware or spyware. However, any company that is hacking the browser to maliciously install their product is itself the criminal and not providing a true security application. So, there are three questions here: How can I close this window? Can I do something to Safari to avoid these hacks in the future? (Just curious) Is MacKeeper or Zeobit somehow loading the search results so that no information about their application being malware or spyware is listed (I can't be the only person in the world that is offended by their tactics, even though it appears I am)?

  Read the article

• New hard drive for backup? [closed]

  - by glaeven

  I have come to realize that I need another external drive to use with my MacBook Pro. I currently have a 1TB WD MyBook Essential that I have been using for about a year and a half. I have it currently partitioned into two drives, one for backup (I named it Leonov) and one for movies, TV shows and other large files I don't need very often (I call that side Discovery One). I use Time Machine for backups since it is completely automated and I can restore from it without much trouble (I have had to at least three times now). As of now, Leonov is full enough that every backup deletes an old one and Discovery One is approaching it's limits. I would like to get a new drive and move one of the sides to it. What are some reliable, external (~1TB) drives for under or around $100? Would it be easier to move the movies (et al.) or the backups to the new drive? I also feel like I should say that all of my important documents (for school and the like, just not my music) are also synced to Dropbox as another form of backup and access.

  Read the article

• RAID Volume is no longer showing in Raid Controller BIOS and in Windows

  - by Gordon

  Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. For their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

  Read the article

• Physical-to-virtual for personal use

  - by Journeyman Geek

  One of my current projects involves reducing the number of old computers lying around. So far, the office systems have been downsized from 5 to 2. One system which had no data on it was dumped entirely, while three other identical boxes were consolidated into to one (I swap hard drives as needed and they just work(tm)). I want to make further cuts. The physical systems in question all run windows xp sp3, and were old Pentium 4s with 256 MB of RAM. Currently, I have got a VirtualBox running on another system. My intention is to migrate all services to that. We can assume that disk space and RAM on the host is not an issue. I'd rather not go with a client-server physical-to-virtual (P2V) method like what VirtualBox uses now. I have a few specific concerns as well - specifically whether I'd need to reactivate or sysprep for dissimilar hardware first. An offline tool for imaging (Windows or Linux) would not be an issue since the drives could be mounted onto another system I have anyway or I could use a LiveCD. What would be my options for P2V conversion, and what would I need to keep in mind when doing this?

  Read the article

• Very strange networking problem in all computers in my house

  - by Anthony

  I have three computers in my house: One desktop (wired), and two laptops (wireless). I'm using Cox Communications (yes they suck), and yesterday they had a major outage. I know it was them because I called them up when I started losing connection to the internet. All the computers can connect just fine, but they don't have internet access. It just says "local only". The weird thing is, some of them work occasionally. For the first day my laptop was working perfectly, while all the other computers couldn't connect. Later on in the day it got reversed, and the desktop was the one with internet access. By the second day the problem on Cox's end was fixed, but we still had no access. I called them up and they reset my modem, and did the usual troubleshooting stuff. It never fixed the problem, but we found out that the problem had to do with conflicting IP addresses. My router was a Linksys WRT54G and it was about 5 years old. I figured it might have gotten damaged from the outage since it was so old, and now it's having trouble "fixing itself" and giving out the proper IP addresses. So I bought a new router, a Cisco Linksys E1000. I set everything up, and still the same problem. My computer has access right now (that's how I'm writing this), but no other computers seem to be able to get access. Is there possible damage to the modem? Can someone help me please? Sorry for this being so long.

  Read the article

• Converting DisplayPort and/or HDMI to DVI-D?

  - by Jeff Atwood

  Newer Radeon video cards come with four ports standard: DVI (x2) HDMI DisplayPort If I want to run three 24" monitors, all of which are DVI only, from this video card -- is it possible to convert either the HDMI or DisplayPort to DVI? If so, how? And which one is easier/cheaper to convert? I did a little research and it looks like there isn't a simple "dongle" method. I found this DisplayPort to DVI-D Dual Link Adapter but it's $120; almost cheaper to buy a new monitor that supports HDMI or DisplayPort inputs at that point! There's also a HDMI to DVI-D adapter at Monoprice but I'm not sure it will work, either. AnandTech seems to imply that you do need the DisplayPort-to-DVI: The only catch to this specific port layout is that the card still only has enough TMDS transmitters for two ports. So you can use 2x DVI or 1x DVI + HDMI, but not 2x DVI + HDMI. For 3 DVI-derived ports, you will need an active DisplayPort-to-DVI adapter.

  Read the article

• Mac "Steam needs to be online to update" - 404 fetching *_osx.zip.*

  - by Chris Boyle

  Since yesterday evening, when I launch Steam on OSX, a self-update progress bar appears instead (at 0 of 30MB or so). This bar does not advance, an error dialog appears: Steam needs to be online to update Please confirm your network connection and try again. The app then exits. This happens whether wifi or ethernet or both are connected, and pings to the outside world succeed throughout. If I look at the logs in Console, they are very similar to this example (though that's not mine). Specifically: Success! http://store.steampowered.com/public/client/steam_client_osx?date=718277 [...] Failed! http://cdn.store.steampowered.com/public/client/breakpad_osx.zip.27f59114a86fcd50533e1d7b128f9300947f9969 Failed! http://cdn.store.steampowered.com/public/client/steam_osx.zip.11a99384214805f2dd3be5084ba6be61d662f8ac Failed! http://cdn.store.steampowered.com/public/client/miles_osx.zip.d9fb546541f59c1fdd03962a605236b1021abab8 Requesting the first URL successfully returns some data including the filenames of the latter three, and requesting any of those gives me a 404 (I've tried multiple clients on multiple continents). Searches on Google and Twitter show about 10-20 others having this problem in the past 24 hours, but hardly the angry mob I'd expect if the problem affected all Steam OSX users. Things that have already been tried with no effect: Switching between wifi and ethernet. Killing all Steam processes including ipcserver. Moving the ~/Library/Application Support/Steam/registry.vdf file away. Requesting those URLs with other clients and from other locations. Interesting: that first URL with the date parameter returns the same content even without that parameter (thus would lead to the same 404s) suggesting that the problem is not necessarily specific to coming from a particular currently-installed version of Steam.

  Read the article

• Multiple Internet connections, multiple networks and split access in Linux

  - by Swapneel Patnekar

  I am having trouble setting up multiple internet connections for split access in Linux. We have 3 internet connections from 3 different ISP's. We want to configure our Linux gateway machine such that our three internal networks 10.2.1.0/24, 192.168.20.0/24 & 192.168.2.0/24 use ISP1, ISP2 and ISP3 respectively in a split access manner. Outlined below is the layout/settings, Interfaces of the Linux Gateway connected to Routers: eth0: 10.1.1.2<---------->10.1.1.1(Internal Interface of ADSL Router)[ISP1] eth1: 192.168.15.2<------>192.168.15.1(Internal Interface of 3G Router)[ISP2] eth3: 192.168.1.2<------->192.168.1.1(Internal Interface of ADSL Router)[ISP3] Kindly note that none of the interfaces in the Linux gateway has a public static IP address. Routers of ISP1 and ISP2 get assigned a dynamic public IP address when connected to the Internet, router of ISP3 has been assigned a public static IP address. Interface of Linux gateway connected to a switch, eth4: 10.2.1.1(LAN Interface for ISP1) eth4:0 192.168.20.1(LAN interface for ISP2) eth4:1 192.168.2.1(LAN Interface for ISP3) eth4:0 & eth4:1 are virtual interfaces with eth4 being the interface connected physically. Based on http://linux-ip.net/html/adv-multi-internet.html I've set the following routes, ip route flush table 4 ip route show table main | grep -Ev ^default | while read ROUTE ; do ip route add table 4 $ROUTE done ip route add table 4 default via 192.168.15.1 ip rule add fwmark 4 table 4 ip route flush cache Additionally, using the following iptables rules to mark & route packets as per the guide mentioned above : http://pastebin.com/KzWHFGJA At this point, computers from 192.168.2.0/24 network are successfully able to reach the Internet through ISP3. 192.168.20.0/24 and 10.2.1.0/24 are unable to access the Internet through ISP1 and ISP2 respectively. Any inputs will be much appreciated !

  Read the article

• How do you setup FTP with IIS Manager Users in an NLB environment with shared IIS configs?

  - by William Jens

  I've setup a 2 node NLB cluster and used the following to share IIS configs between them. http://blogs.technet.com/b/meamcs/archive/2012/05/30/configuring-iis-7-5-shared-configuration.aspx The IIS configs and content is located on a network share via a UNC path. This works - updating IIS settings on one node, is visible in another node and my website works on the individual nodes and the cluster as whole. I'm able to setup an FTP site and successfully connect with my Windows login. However, I want to use IIS Manager Authentication as defined in: http://www.iis.net/learn/publish/using-the-ftp-service/configure-ftp-with-iis-manager-authentication-in-iis-7 I've tried using "Network Service" with the FTP COM object as well as a dedicated user account that exists on all three hosts, but every time I try to login with an IIS user I get something like the following: IISWMSVC_AUTHENTICATION_UNABLE_TO_READ_CONFIG An unexpected error occurred while retrieving the authentication information. Exception:System.Runtime.InteropServices.COMException (0x8007052E): Filename: Error: at Microsoft.Web.Administration.Interop.AppHostWritableAdminManager.GetAdminSection(String bstrSectionName, String bstrSectionPath) at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath) at Microsoft.Web.Management.Server.ConfigurationAuthenticationProvider.GetSection(ServerManager serverManager) Process:dllhost User=NT AUTHORITY\NETWORK SERVICE Can anyone point me in the right direction here?

  Read the article

• What are useful .screenrc settings?

  - by gyaresu

  Basically like some of my own that I've posted below. I'm looking for added functionality to the programme 'screen'. At the very least have a look at the last line for a fantastic 'menu bar' at the bottom of a screen session. ## gyaresu's .screenrc 2008-03-25 # http://delicious.com/search?p=screenrc # Don't display the copyright page startup_message off # tab-completion flash in heading bar vbell off # keep scrollback n lines defscrollback 1000 # Doesn't fix scrollback problem on xterm because if you scroll back # all you see is the other terminals history. # termcapinfo xterm|xterms|xs|rxvt ti@:te@ # These will let you use bind -c selectHighs 0 select 10 #these three commands are bind -c selectHighs 1 select 11 #added to the command-class bind -c selectHighs 2 select 12 #selectHighs bind -c selectHighs 3 select 13 bind -c selectHighs 4 select 14 bind -c selectHighs 5 select 15 bind - command -c selectHighs #bind the hyphen to #command-class selectHighs screen -t rtorrent 0 rtorrent #screen -t tunes 1 ncmpc --host=192.168.1.4 --port=6600 #was for connecting to MPD music server. screen -t stuff 1 screen -t irssi 2 irssi screen -t dancing 4 screen -t python 5 python screen -t giantfriend 6 these_are_ssh_to_server_scripts.sh screen -t computerrescue 7 these_are_ssh_to_server_scripts.sh screen -t BMon 8 bmon -p eth0 screen -t htop 9 htop screen -t hellanzb 10 hellanzb screen -t watching 3 #screen -t interactive.fiction 8 #screen -t hellahella 8 paster serve --daemon /home/gyaresu/downloads/hellahella/hella.ini shelltitle "$ |bash" # THIS IS THE PRETTY BIT #change the hardstatus settings to give an window list at the bottom of the ##screen, with the time and date and with the current window highlighted hardstatus alwayslastline #hardstatus string '%{= mK}%-Lw%{= KW}%50>%n%f* %t%{= mK}%+Lw%< %{= kG}%-=%D %d %M %Y %c:%s%{-}' hardstatus string '%{= kG}[ %{G}%H %{g}][%= %{= kw}%?%-Lw%?%{r}(%{W}%n*%f%t%?(%u)%?%{r})%{w}%?%+Lw%?%?%= %{g}][%{B} %d/%m %{W}%c %{g}]'

  Read the article

• Analyze a BSOD (irql_less_than_or_equal)

  - by Bruno Reis

  Hello. About 2 months ago I bought a new system and built it at home: Mother board: XFX X58i Processor: Core i7 920, using the stock cooler Memory: 3x2GB Corsair DDR3 1600 Video card: NVIDIA GTS 250 (1GB) Hard disk: 2x WD 500GB, 7200rpm I have 2 screens plugged into the video card, and the system is connected to a 550W PSU. Nothing is overclocked. After building the system, I stressed it a lot with Prime95 and rthdribl to check its stability. All my tests were perfect. So I reinstalled Win 7 x64 Professional and started using it normally. The first week (2010-03-15) I got the infamous irql_less_than_or_equal BSOD. Ten days after (2010-03-24) I got another one. Then on 2010-04-09, 2010-05-04. Since 2 days ago it became worse: I got one bluescreen per day! (2010-05-12, 2010-05-13, 2010-05-14). I installed BlueScreenView to try to obtain some information, but I'm not able to extract any useful information apart from the bug check string (irql_less_than_or_equal), and that it was caused by ntoskrnl.exe (the first three at ntoskrnl.exe+71f00, the last 4 at ntoskrnl.exe+70600 -- which I suspect could be the same thing, as Microsoft could have patched this file in the mean time, so the address of the function causing it changed). Then I stressed my memory sticks with memtest, they worked perfectly. After booting, I've stressed my GPU with FurMark and RTHDRIBL, everything was fine. Then I stressed the CPU with 4 instances of Prime95 while monitoring the temperature -- that never exceeded 85oC with the case closed --, everything fine. Finally I've stressed the whole system with HeavyLoad for a looooong time, everything worked just fine. So, I have stressed most of the components of the system, but couldn't get any useful information from it. Do you have any hint on what else can I do to find the culprit? Thanks Bruno

  Read the article

• Will just a couple of thermal "trip" shutdowns typically damage a CPU?

  - by T.J. Crowder

  The short version If a CPU gets so hot that the system turns itself off because of a thermal trip signal just a couple of times, is it likely that the CPU will be damaged? Or does the trip do its job, turning it off before the CPU gets damaged? (This is with all default settings in the BIOS; I haven't raised any temp thresholds or overclocked anything.) The longer version I just got this Intel Atom D510-based fanless system, installed a 2.5" mobile SATA drive and two 2GB PC2-6400s, closed it up, and having checked everything was recognized in the BIOS, set about installing Ubuntu. After a couple of false starts related, I think, to the external DVD drive I was using, I got the install happily running along. About three-fourths or so of the way through the install, having been running less than an hour, the machine turned itself off. I was actually out of the room at the time, but when I came back and turned it back on, it said it had shut down due to a thermal event. I went into the BIOS and saw that (at that point, having just been turned back on after a couple of minutes off), it was running 87C. As near as I can tell from Intel's docs (PDF here), the max "junction" temperature for the CPU is 100C and it will raise a THERMTRIP signal at 125C. Yowsa. Presumably there will be some back-and-forth with the vendor on this, I'm just wondering whether letting it get that hot a couple of times is likely to end up damaging it.

  Read the article

• Name one good reason for immediately failing on a SMTP 4xx code

  - by Avery Payne

  I'm really curious about this. The question (highlighed in bold): Can someone name ONE GOOD REASON to have their email server permanently set up to auto-fail/immediate-fail on 4xx codes? Because frankly, it sounds like "their" setups are broken out-of-the-box. SMTP is not Instant Messaging. Stop treating it like IRC or Jabber or MSN or insert-IM-technology-here. I don't know what possesses people to have the "IMMEDIATE DELIVERY OR FAIL" mentality with SMTP setups, but they need to stop doing that. It just plain breaks things. Every two or three years, I stumble into this. Someone, somewhere, has decided in their infinite wisdom that 4xx codes are immediate failures, and suddenly its OMGWTFBBQ THE INTARNETZ ARE BORKEN, HALP SKY IS FALLING instead of "oh, it'll re-attempt delivery in about 30 minutes". It amazes me how it suddenly becomes "my" problem that a message won't go through, because someone else misconfigured "their" SMTP service. IF there is a legitimate reason for having your server permanently set up in this manner, then the first good answer will get the check. IF there is no good reason (and I suspect there isn't), then the first good-sounding-if-still-logically-flawed answer will get the check.

  Read the article

• Asterisk, IAXModem & Hylafax how-tos?

  - by Brian Postow

  I'm trying to set up Asterisk and IAXModem to send faxes via T38 (Yes, I know I'm swatting a fly with a Buick...) However, since I'm trying to do something so small with a product so large, I'm having trouble finding samples or how-tos that show me how to set this up. I've got all three installed, and I THINK I have my IAXModem config correct. I'm pretty sure that I have Hylafax correct (I've used it with T38Modem) so, I need to know which of the Asterisk samples I need to use, and how to use them. I think I want to use some combination of iax.conf, iaxprov.conf, sip.conf and sip_notify.conf. But I'm not sure where to put them, or what to change... I'm sure that the answer is RTFM, but I'm not sure WHICH M, or where in it to R... thanks. EDIT On a mailing list, someone told me that this actually WON'T WORK because IAX doesn't do T38. So, is there some other way to get Asterisk to work with Hylafax and send T38? I know that Asterisk does T38, the question is how to get the data from Hylafax and back...

  Read the article

• Software mirroring (RAID1) versus "Fake Raid" for new Windows 7 install

  - by kquinn

  I've just ordered two new hard drives for my main desktop and a copy of Windows 7 Professional 64-bit. I'd like to do a clean install of Win7 onto the new drives (leaving my old XP Pro boot partition around for a while in case something goes disastrously wrong, etc.). I want to have them set up in mirrored (RAID-1) mode. My understanding is that Win7 Pro can do software mirroring, but can I set this up directly at install time? If so, how? Note that I'd like the disk to be split into three partitions (OS/Apps&Data/Bulk data), all of which should be mirrored. Would it be better (more reliable or faster) to use my motherboard's hardware RAID support? My motherboard is an older nVidia nForce 680i SLI, which is not the most stable of motherboards, and I'm not sure how trustworthy its RAID1 configuration might be (or if Win7 could even detect and install onto a hardware-mirrored volume). Also, the performance characteristics of RAID1 are rather different than RAID0 or RAID5, and I'm wondering if Win7's software mirroring might actually be faster than hardware RAID1 (for example, I'm more of a Unix admin when I have to wear the sysadmin hat, and I've had great success deploying ZFS; most hardware RAID1 implementations have to read both disks and compare results to look for data errors, but ZFS can read from only one disk in the mirror and just use the built-in checksum, meaning it can have up to 2x the number of reads in-flight, as long as there's no data corruption). Edit: Okay, my question about whether Windows 7 can do software mirroring has been answered, and it can. I'm still unsure whether Windows software RAID or my motherboard's hardware "fake RAID" function is a better choice, though. Remember, I'm only interested in mirroring -- not the more complicated striping or parity operations that generally show the poor performance of crappy motherboard RAID solutions.

  Read the article

• I can't connect to my network, except in safe mode

  - by eidylon

  My laptop cannot connect to my network all of a sudden except in safe mode. When it boots, it will show the networks available in the tray popup, but if I click connect on any, it says "Unable to connect" and the troubleshooter is useless. Shortly thereafter all the networks disappear. I have tried removing IPv6 support as I have seen that cause problems. No joy. I've also tried removing the wireless network adapter in Device Manager and reinstalling it, also no joy. I've also tried attaching a USB wireless adapter, and it has the same problem. If I boot in safe mode, then it has no problems at all. Three other devices in the house connect fine, so I am pretty sure it is nothing to do with the router. Any ideas what to check next? I am running Win7 Ultimate on a 2GHz Quadcore with 8GB RAM with a Broadcom 802.11n wireless card. EDIT: RE wired connections: What is very weird is that if i plug in a wired connection, then not only does it connect via the wired connection, but the wireLESS also starts working perfectly. And a soon as I unplug the wire, then the wireLESS stops working again! So it seems the wireless is right now working only in safe-mode, or when a wired connection is also plugged in.

  Read the article

• SQL 2K5 - Multiple databases vs. Multiple files

  - by Bob Palmer

  Hey all, quick question. Our current legacy system was built using multiple distinct databases (about ten of them). These are all part of the same discreet system, and a large number of SPs and functionalty span multiple databases. There are also key relationships that span (for example, a header table may be in database A with history, etc. in database B). When deploying multiple copies of our app to the same server therefore, we have to use multiple instances (because the database names are coded into so many sprocs). We're evaluating the idea of taking these ten databases (about 30gb total with individual sizes ranging from 100mb to 10gb) and merging them into a single database. Currently, we have our databases spread accross multiple spindles for better IO. The question I have is whether or not there is any performance loss or benefit of having 10 different databases vs. 10 different database files? i.e. rather than having three databases (A, B, and C) Disk D: A.mdf (1gb) Disk E: B.mdf (4gb) Disk F: C.mdf (10gb) Disk G: A_Log.ldf, B_Log.ldf, C_Log.ldf have one database (X) Disk D: X1.mdf (5gb) Disk E: X2.mdf (5gb) Disk F: X3.mdf (5gb) Disk G: X1_log.ldf,X2_log.ldf,X3_log.ldf Thanks! -Bob

  Read the article

• Use one NIC to create multiple interfaces for Linux KVM

  - by Phanto

  I am working on a thesis research project, and I am having some difficulty figuring out how to make one NIC spawn several "bridge" interfaces such that each KVM VM can be seen on the local network. I am very new to KVM, and am still exploring what it can do. Below is the scenario that I am attempting to make (on a CentOS/RHEL 6 system): Linux KVM Host has 1 NIC (eth0) connected to a switch. Create multiple "bridge" or equivalent interfaces that are spawned off of eth0 that would provide a unique IP for each VM. This is so that each VM can communicate with other hosts on the network, and that other hosts on the network can communicate with the VM. IMPORTANT: I would like iptables on the KVM host to be able to manipulate/control/restrict the traffic that would be sent on those "bridge" interfaces. I would like to create a minimum of three VM's, each using their own unique "bridge" interfaces. I have previously made a br0 interface off of eth0, but unfortunately, I am unable to add any more to it. It appears that you can only bridge 1 interface to the NIC. I would like to bridge many to one. Would a tap device be able to do this? If so, how would it be set up? Effectively, I am attempting to replicate what can easily be created with VirtualBox on Windows, where each VM is given a "bridged" interface, and can live on the network. I want to achieve this very same thing with Linux KVM. Thank You EDIT: To be more descriptive, I want to achieve something that looks like this: This can be found on this page: http://en.gentoo-wiki.com/wiki/KVM#Networking_2 HOST +---------------+ | | KVM GUEST1 | | +--------------+ | +------+ | | | LAN ---+--- eth0 | +--+---+---- nic0 | KVM GUEST2 | | tap0----+ | |192.168.1.13 | +--------------+ | | tap1----+ | +--------------+ | | | +------+ | | | | | br0 +--+----------------------+---- nic0 | |192.168.1.12 | |192.168.1.14 | +---------------+ +--------------+

  Read the article

• HTB.init / tc behind NAT

  - by Ben K.

  I have an Ubuntu 10 box that I'm trying to set up as a bandwidth-shaping router. The machine has one WAN interface, eth0 and two LAN interfaces, eth1 and eth2. NAT is configured using MASQUERADE as described at InternetConnectionSharing. I'm mostly concerned with shaping outbound traffic from the LAN interfaces -- in the end, I'd like to end up with a hard 768Kbps limit per-LAN-interface (rather than a limit on eth0 pooled across all interfaces). I installed HTB.init, and riffing on the examples, tried to set this up on eth1 by putting three files into /etc/sysconfig/htb: /etc/sysconfig/htb/eth1 DEFAULT=30 R2Q=100 /etc/sysconfig/htb/eth1-2.root RATE=768Kbps BURST=15k /etc/sysconfig/htb/eth1-2:30.dfl RATE=768Kbps CEIL=788Kbps BURST=15k LEAF=sfq I can /etc/init.d/htb start and /etc/init.d/htb stats and see information that /seems/ to suggest it's working...but when I try pulling a large file via the WAN interface the shaping clearly isn't in effect. Any suggestions? My guess is it has something to do with where the shaping falls in the NAT chain, but I really have no idea where to begin troubleshooting this. ---- Update: Here's my /etc/init.d/htb list output, it seems to make sense -- the default rate for eth1 is 768Kbps? ### eth0: queueing disciplines qdisc htb 1: root refcnt 2 r2q 100 default 30 direct_packets_stat 0 qdisc sfq 30: parent 1:30 limit 127p quantum 1514b perturb 10sec ### eth0: traffic classes class htb 1:2 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b class htb 1:30 parent 1:2 leaf 30: prio 0 rate 6144Kbit ceil 6144Kbit burst 15Kb cburst 1598b ### eth0: filtering rules filter parent 1: protocol ip pref 100 u32 filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:30 match 00000000/00000000 at 12 match 00000000/00000000 at 16 ### eth1: queueing disciplines qdisc htb 1: root refcnt 2 r2q 100 default 30 direct_packets_stat 0 qdisc sfq 30: parent 1:30 limit 127p quantum 1514b perturb 10sec ### eth1: traffic classes class htb 1:2 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b class htb 1:30 parent 1:2 leaf 30: prio 0 rate 6144Kbit ceil 6144Kbit burst 15Kb cburst 1598b

  Read the article

• Backup software for incremental swapped-out drives?

  - by user13743

  We're using Acronis Home 11 to backup our main Windows machine at the office. We have a set of portable hard drives that we swap out each week, for redundancy. We have incremental sets ( a new diff of the entire series each night) building on each drive. However, from time to time, Acronis gets confused and sometimes makes a new full backup. This eats up a lot of drive on the disks. Also, I have to trick the Acronis script each time I swap out a drive and point it to the new incremental backup set. Finally, if a drive gets full, there's no way to partition the backup set on a drive. I found this out the hard way, and now one drive is full with one backup set. So now on the other drive, I have three folders of backup sets. When one starts to get full, I delete the oldest one and start a new set. That way one single drive never gets filled up with one single backup set. I'm looking for a backup software that can backup Windows in incremental sets, and doesn't get tripped up with swapped out drives. Is there a better solution?

  Read the article

• Programmer configuring a new network

  - by David Lively

  I'm in the process of expanding my home network from a couple of laptops on a wireless Verizon FiOS router to include: Linksys 24-port switch Cisco Pix 515 Cisco 3640 router One new development desktop and three new machines to act as a db server, web server and a backup system. My company is moving offices and we've decommissioned some older hardware, which I was able to pick up for the cost of the labor to move it home from the office. The benefits to working with dedicated web and db servers are very valuable to me. I know very little about network topology, other than that everything plugs into the switch, which then plugs into the cheap Verizon router. (Verizon provides a coax connection that the router must translate into Ethernet before I can use it with any of this equipment). Questions: What is the recommended topology for this equipment? Verizon router - Pix - 3600 - switch? Is the 3600 even necessary or desirable? The Verizon router has one WAN port and 4 client ports, all 10/100. Is there any performance benefit at all to wiring multiple connections from the verizon router to the switch, assuming I don't use the Pix? Should I use the Pix? Software firewalls are a pain, and seem silly if I have a device like this lying around. Anything else I should know? Am I wasting my time with this? I also obtained a 7 foot rack, shelves, patch panels, UPS, patch panels, etc, which are going into a conveniently air conditioned closet. All constructive advice appreciated.

  Read the article

• Can I get ethernet out of my Verizon FIOS set-top box?

  - by Tom Hughes

  Setup: my home network is long & skinny, and the FIOS-connected router is all the way at one of the apartment. At the other end, far away (and a floor higher) is my HD TV, which gets a cable-TV signal from a Verizon set-top box that is coax-connected back to the FIOS on-premises equipment. Wi-Fi won't work, the apartment is too stretched out, with old, thick walls and floors. Goal: I think there are three ways to get ethernet back to where the HD TV is: 1) run a cable! this isn't crazy but isn't cheap either (my building won't let me do it, it involves hiring an electrician because the cable would run partly through the public hallway ceiling) 2) split the coax near the TV and put in... a MoCA device? 3) somehow tease the set-top box, which has an RJ-11 (ethernet) port on the back, to give me network access. Question: any other choices? and, is one choice better than the others? #3 is by far the most desirable because it would involve the least wiring -- but I can't find any resources to help make it happen. #2 is a bit scary, I don't want to degrade service to the TV or anywhere else for that matter.

  Read the article

• OpenVPN, install a TAP adapter

  - by GolezTrol

  When I try to connect to my work VPN using OpenVPN, the connection fails with the message: All TAP-Win32 adapters on this system are currently in use. Many sources suggest to look in Control Panel\Network and Internet\Network Connections an enable the TAP adapter, but when I look there, there is none. Now I've run addtap.bat which is provided with OpenVPN, but I still don't get to see any TAP adapter, and logging in in VPN still fails. The output of addtap.bat is C:\Windows\system32>"C:\Program Files (x86)\OpenVPN\bin\tapinstall.exe" install "C:\Program Files (x86)\OpenVPN\driver\OemWin2k.inf" tap0801 Device node created. Install is complete when drivers are updated... Updating drivers for tap0801 from C:\Program Files (x86)\OpenVPN\driver\OemWin2k .inf. Drivers updated successfully. I've Run As Administrator both the setup of OpenVPN and addtap.bat. I've run deltapall.bat to remove any (maybe hidden) adapters. It said it removed three of them, after which I ran addtap.bat again to try to create another one. I also run OpenVPN itself as administrator. What's wrong? Running Windows 7 Home Premium on a HP Pavilion dv7 4050ed. It has worked before, but I recently had to reinstall my laptop, for which I used the restore disks I created when I just got it. Everything else seems to work fine. == UPDATE == The TAP adapter is found in Device Manager, but apparently it is disabled because it is incompatible with Windows 7 64bit. I've deïnstalled OpenVPNGui, downloaded a version that should be 64bit compatible, and installed that. Still no cigar. Then I found a tip to install OpenVPN (version 9) after installing OpenVPNGui, because that installs OpenVPN version 8. Now I got a v9 TAP driver in Device Manager, but it still doesn't work and shows up in device manager with an exclamation mark, and not at all in my network devices.

  Read the article

• PFSense VPN Routing

  - by SvrGuy

  We use PFSense firewalls at three installations with the following LAN networks: 1.) Datacenter #1: 10.0.0.0/16 2.) Datacenter #2: 10.1.0.0/16 3.) HQ: 10.2.0.0/16 All of these locations are linked via an IPSEC tunnel that works properly. Hosts in any of the above networks can communicate with hosts in any other of the above networks. Now, for our laptops etc. we established a road warrior network 10.3.0.0/16 and have implemented OpenVPN to link the laptops etc. to Datacenter #1. This works great too, so our laptops can connect and communicate with any host in Datacenter #1 (anything on 10.0.0.0/16) The problem is the laptops can't communicate with any hosts that Datacenter #1 can reach by its IPSEC tunnel to Datacenter #2 (and/or the HQ for that matter). Does anyone know what to do configuration wise on the PFSense box in Datacenter #1 to configure to route packets received on the OpenVPN tunnel to Datacenter #2 over the IPSEC tunnel? It could be a setting on the OpenVPN or some sort of static route or some such. Any ideas?

  Read the article

< Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >