Search Results

Search found 19934 results on 798 pages for 'usb flash drive'.

Page 265/798 | < Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >

  • Ubuntu Wubi "drive" failure; mount drive in XP?

    - by 618034
    Hi there, I installed the Wubi distribution of Ubuntu on a separate partition (which is silly, since why do I care if Windows can still manage the partition?) a few months back; it was pretty awesome, until Linux hosed. At this point, I can get Ubuntu to boot if I try really hard through grub, but once it does start, the screen is hosed, so no dice. At this point, I'd like to wipe it all and start over, but I need to get some stuff off the "disk". The Wubi install makes this difficult, since the "disk" is a flat file on an NTFS partition. I've done just about everything I can think of — I renamed the virtual disk .iso, mounted it with VirtualCloneDrive, then used whatever magic EXT3 (EXT4?) readers I could dig up on the Internet to parse the mount — but nothing's working. Can you offer any suggestions? The "disk" is currently in D:\ubuntu\disks\root.iso. Many thanks! (I may be high-latency at the moment, apologies if I don't address follow-ups quickly)

    Read the article

  • Streaming Flash Video - getting my feet wet

    - by Travis
    I'm working on a project that will involve having a couple thousand short videos online. I haven't done anything with online video before and this is all a bit new to me, so I am looking for some general advice... I would like to use Flowplayer, and I would like to encode the videos as H264s. I am enamoured with Flowplayer's slow motion feature, which if I understand correctly, is only available using a Wowza server. I'm wondering: Is it advisable to use a delivery network of some sort? (Flowplayer seems to have a partnership with HDDN, and recommends them. http://www.hddn.com/) Or would I be better off purchasing Wowza and installing it on our own server? (At first glance, it looks as though signing up with a network like HDDN is much simpler, but perhaps there are problems that come along with this...?) Any tips / warnings of imminent peril would be much appreciated. Thanks in advance.

    Read the article

  • Need deleted data back from Pen Drive, Please help

    - by Manav Sharma
    All, I am using a Pendrive to transfer files from one system to another. I think I deleted some files from the Pendrive that I now need back. Also, there are chances that I might have overwritten the memory where the deleted data might have existed. Is there any software to do something about that? I understand that logically whatever is overwritten in memory cannot to fetched back. But still I need to trust the advances in the technology. Any help is appreciated. Thanks

    Read the article

  • Synaptics/usb mouse drivers data is invalid on win server 2003

    - by the wonderer
    Have just installed windows server 2003 image onto an HP laptop. Cannot get the mouse drivers to work. Have the correct drivers because I've extracted them out of a working PC (exact same model). I am always getting "Data is invalid". This is the synaptics touchpad drivers. Does anyone know how to fix this/ workaround to get mouse working? I have heard it may have something to do with permissions in the registry?

    Read the article

  • Decyphering Seagate drive model numbers?

    - by Stefan Lasiewski
    I'm comparing Seagate's Enterprise and Desktop drives for a variety of old and new servers. These servers come from different generations, so options like size (73GB, 2TB) and interface (SATA vs SAS 3.0Gbps vs SAS 6Gbps vs SCSI Ultra320) are widely variable. I'm trying to compare the sizes, speeds and interfaces, but I'm getting thrown off by different models. Also, their website is not the best. Does anyone know of a documented explanation of the Seagate model numbers? And is there a single spreadsheet which compares the features for all drives (or all 'Enterprise' drives?). Seagate drives have model numbers like this: Model ST3600057SS 6-Gb/s SAS 600 GB None at Cheetah® 15K Hard Drives Model ST373455LW Ultra320 SCSI 73.4 GB 68-Pin LW at Cheetah® 15K Hard Drives Model ST32000644NS SATA 3Gb/s 2 TB None at Constellation™ ES Hard Drives Model ST973452SS 6-Gb/s SAS 73 GB None Savvio® 15K Hard Drives Model ST9200011FS SATA 3Gb/s 200 GB Pulsar™ Solid State Drives I understand the model numbers read something like this: ST - SOMETHING1 - SIZE - SOMETHING2 - INTERFACE Where the fields mean something like this: ST : For 'Seagate'? 'Seagate Technoligies'? SOMETHING1 - This field has number, but I'm not sure what that represents. SIZE - Size in Gigabytes. This is a number like '73' or '300' or '2000' SOMETHING2 - This field also has a number, but I'm not sure what it means. INTERFACE - This field seems to indicate the Interface. 'SS' means SAS, 'FC' means Fibre Channel, but I don't see how to distinguish between 6Gbps SAS and 3Gbps SAS, or different SATA or FC speeds. I don't see a field which indicates the RPM (15K , 10K, 7.2K) etc. Is this part of the model number?

    Read the article

  • Disable laptop CD-ROM drive

    - by Stan
    Since I seldom use the built-in cd-rom, but usually carelessly press open door button which is on the side of laptop. Is there any way to power off cd-rom so the button won't work. Better not to open the back lid and unplug power cable.

    Read the article

  • Reformat a WindowsXP drive: Quick, regular, or leave the current file-system

    - by Julie
    When reformatting, Windows XP ask me to choose from these formatting methods. (Implying that ALL of them are "formatting methods"... even #3) Reformat using NTFS (quick) Reformat using NTFS Leave the current file-system intact (no changes) What choice #3 really mean? Does it mean: A. Leave the current file-system (whatever file-system is already in use) and reformat to match that. (ie. If you current have NTFS, reformat to that again. If you currently have FAT32, reformat to that again. That is: Reformat without changing to a different file-system. Leave the current type.) or... B. Do absolutely nothing. Don't format. Don't delete any of my files. Abort the formatting process entirely.

    Read the article

  • Using the link command to keep backups on another drive

    - by Xavier
    I have a folder that contains a not so large amount of space called /data/backup. I have been told that if I link that folder (/data/backup) to an even bigger folder area like /bigdata/backup for example, that I will be able to execute backups to the /data/backup folder. It will then just create a link, but the data will be seen in both folders and the latter one (/bigdata/backup) will contain the backup results but it will show on both folders. Since the /bigdata/backup has far more disk space then the backup will no longer fail because of space problems in the /data/backup one. Is this true?

    Read the article

  • Grub Error 18 - Solid State Drive

    - by clint
    I recently used Raw Copy to make an image of my 300gb Raptor Hd to a OCZ Vertex SSD 60GB. And When I pluged in the SSD to boot I get a Grub Error 18. I have tried to changed in the BIOS setting to LBA, Large, Auto, trying different combination's. Any advice. thanks, Clint

    Read the article

  • Can't access shared drive when connecting over VPN

    - by evolvd
    I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

    Read the article

  • How to Install OS without DVD and USB boot

    - by Timothy James Reed
    I just purchased a used Dell F1D 1U rack mount server and would like to install Ubuntu or ESXi with Virtual Disks or anything for that matter. I'v read that Dell's have built in DRAC so you can access it remotely. There are 3 ethernet plugs in the back but I dont know which one to use. In the BIOS it says I can configure Remote access on [com1] or [com2] not sure if that is ethernet 1 & 2. I also set it up so to use a static IP adress. Thats as far as I have gone. Not sure what to do next. I'v Tried to do a PXE server with TFTP but get stuck at Error "cant locate file" or something like that. Not even sure I want to go that route anymore because of all the hassel of editing files. All my computers are OSX or Linux and the only Windows I have is via VMWare. What steps to i do now?

    Read the article

  • AFP AD ACL permissions issues with external drive

    - by AlanGBaker
    Mac OS X Server 10.4.11 connected to an AD domain system serving AFP shares to Mac OS X 10.5.8. If I create a share on the the internal RAID of the server with an ACL that allows RW to all ("Domain Users"), then it works, but a share created identically on the external RAID appliance (Drobo v2) doesn't. When the share from the Drobo is mounted, it shows no sign that it has any ACLs associated with it: neither in the Finder (Get Info), nor when checked via the terminal with "ls -lae". The Drobo does show that the ACLs exist when I ssh into the server and check it there, but when the clients mount that share, they just... ...disappear. Any thoughts?

    Read the article

  • Virtual Hard Drive not booting - VMWare

    - by Chloraphil
    I have a .vmdk (VMWare hard disk) file that I cannot use as the lone disk in a new virtual machine. If I attach it to an existing virtual machine then it works fine. It has Windows Server 2003 on it. When I attempt to boot the new VM it attempts a network boot. EDIT: VMWare Workstation 6.5 I could not find a PXE option in the settings, and I did look in the VM config file for "PXE" but did not find one.

    Read the article

  • Windows Server 2008 R2 Finding Hidden files that are causing drive to fill up

    - by Xaxum
    What is the best way to find out what files are sucking up so much space? My Windows directory lists its size as 15 GB but when I run a powershell script against it, it shows 40 GB. It seems 40 GB is about right because if I use that 40 GB and add it to the rest of my folders on C I get the 45 GB that is in use. I checked volume shadow copy and that is disabled and there are no volume shadow files listed. My page file is limited to 3 GB. How can I find out what files are taking 25 GB of space? Final Results: We ended up disabling UAC and then the Properties showed the true file size of the Windows folder, as shown in powershell script. This allowed us to drill down to the folder that had the issues... In our case it was in C:\Windows\System32\config\systemprofile\AppData\Local\VMware\VDM there were several large dump files, these were the mysterious unknown files in WinDirStat. It turns out our nessus scan is crashing a view service for a couple seconds so it creates a large dump file. So we will try this.. https://discussions.nessus.org/thread/5212

    Read the article

  • My iPhone is stuck at screen with USB cable and iTunes logo

    - by alex
    I just tried updating the iPhone's firmware, and things went haywire. iTunes informed the update had failed and linked me to this page. The iPhone is stuck on the image from the top of that page. I held down the sleep and home buttons until it turned off and turned it back on, and then went through the iPhone's 'restore' mode. It then error'd again and I'm stuck back with the logos on the iPhone. Does anyone know how to fix this? Thanks

    Read the article

  • VMWare Workstation can't read CD/DVD drive

    - by Chris W
    A fresh install of VMWare Workstation 7 (7.1.1 build 282343) on Windows 7 64 bit. When I try to read a CD/DVD from a guest (either to install a fresh guest or to read a CD within an existing VM I get the following error: Cannot connect virtual device ide1:0 because no corresponding device is available on the host. I've tried fiddling with the IDE channels as well as tried SCSI with no joy. What am I missing? I can run ISOs fine but I don't want to have to convert everything to an ISO when I presume that this should just work fine.

    Read the article

  • 4TB HGST SATA drive only shows 1.62 TB in Windows Server 2012

    - by user136085
    I'm using a Supermicro X9SRE-3F motherboard with the latest BIOS and 2x 4TB drives connected to the on-board SATA controller. If I set the BIOS to RAID and create a RAID 1 array, the array shows up in the BIOS as 3.6TB. However when I boot Windows (on a separate RAID 1 array), the 4TB drives show up individually in disk manager as 2x 1.62TB drives. I could use Windows 2012 to set up software RAID 1, but when I set the BIOS back to 2x individual drives, they still show up in Windows as 2x 1.62TB drives. How do I access the full capacity of these drives? Thanks, Brian Bulaw

    Read the article

  • Windows 8, Truecrypt drive mounts but Windows cannot read its content

    - by phil
    I installed Windows 8 and when I started it, it said that it was repairing a disk. The disk was an encrypted Truecrypt disk. I couldn't mount the disk in Truecrypt after that. I tried to repair the header and it worked, now I can mount the disk but neither Windows 7 or 8 can read the content. Windows asks if it should format the disk. I have all the important files on backup, but there are some media files that I would like to get back. Any ideas?

    Read the article

  • "Always available offline" option missing on one network drive in Windows 7

    - by Rynardt
    My network setup at home has 2 network storage devices on the network. The one is for media content on a Popcorn Hour A-110 and the other is a D-Link DNS-320 in RAID 1 configuration for business files. When I access these network drives and right click a folder the following context menu appears for the A-110 device, but not for the D-link. I have tested this in both Windows 7 32bit and Windows Vista 64bit. In both instances the "Always available offline" option is only available for the A-110 storage device, and not for the D-link. How do I get this option for the D-link? Any advice or ideas are welcome.

    Read the article

  • mirroring linux server to external usb harddrive

    - by DuPie
    My google-fu must be sucking. i havent been able to find a good solution for the following: numerous Linux server on commodity hardware Trying to do a recovery mirror copy to external harddrives External harddrives are smaller than source harddrives, but larger than data External drives are connected via usb2 (slow) Servers range from 20GB of data to 400GB of data Servers are remote, so hands on access is a pain need to copy boot files. empty external drives currently Basicly, looking for a way to do use a ghosting solution from INSIDE a running linux server to an external harddrive, without booting a cd etc. the rsync/cpio solutions i've looked at dont work great with grub/dev/proc etc. I understand that since the system isnt offline, it wont be a "mirror" image as files change, but thats ok. Are there any free/commercial products that would work?

    Read the article

  • Moving default web site to another drive

    - by Chadworthington
    I set the default location from c:\inetpub\wwwroot to d:\inetpub\wwwroot but when I access my .NET 4.0 site get this error: Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive. Source Error: Line 105: Set explicit="true" to force declaration of all variables. Line 106: --> Line 107: <compilation debug="true" strict="true" explicit="true" targetFramework="4.0"> Line 108: <assemblies> Line 109: <add assembly="System.Web.Extensions.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> When I try to Manage the Basic Settings on the Site and click the "Test Settings" button, I see that I have a problem under "authorization:" The server is configured to use pass-through authentication with a built-in account to access the specified physical path. However, IIS Manager cannot verify whether the built-in account has access. Make sure that the application pool identity has Read access to the physical path. If this server is joined to a domain, and the application pool identity is NetworkService or LocalSystem, verify that <domain>\<computer_name>$ has Read access to the physical path. Then test these settings again. 1) Do I need to grant rights to IIS to the new folder? Which user? I thought it was something like IIS_USER or something similar but I cannot determine the correct name of the user. 2) Also, do I need to set the default version of the framework somewhere at the Default Site level or at the Virtual folder level? How is this done in IIS6, I am used to IIS5 or whatever came with XP Pro. 3) My original site had a subfolder under wwwroot called "aspnet_client." How was this cleated? I manually copied it to the corresponding new location. My app was using seperate ASP specific databases for storing session state and role info, if that is relevant. Thanks

    Read the article

< Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >