Search Results

Search found 8408 results on 337 pages for 'cgi bin'.

Page 266/337 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

• permanently load module

  - by Radu

  I have a Compaq Presario CQ-61 320SQ, I am using Ubuntu 10.04 because after update to 10.10 my mouse and touchpad won't work, network won't work, sound won't work ... (I managed to fix most of them after almost a month of googling, but not all, my 2 Desktops have no problem with 10.10) so I decided to switch back to 10.04, where I have a problem: My broadband speed is very low beacause of the kernel module r8169, I downloaded the good module r8101 and every time the computer boots have a rc.local entry to fix this. Question: Can I load the modul permanently from a specific location. I heard about /etc/modules but there I need the module name, but I have to load it from a specific path (where is the default path for that) Thank you. So I studied the script: It creates the file r8101.ko in /lib/modules/uname -r/kernel/drivers/net so I think as long as nobody will delete that file, and I don't update the kernel, maybe adding r8108 to /etc/modules will work, and add r8169 to blacklist ... I will give it a try. EDIT2: So I added r8101 to /etc/modules and blacklist r8169 to /etc/modprobe.d/blacklist.conf It still uses the old module, lsmod prints: radu@adu:~$ lsmod | grep r8 r8101 67626 0 r8169 34108 0 mii 4381 1 r8169 EDIT: the module is loaded using this script that came with it: #!/bin/sh # invoke insmod with all arguments we got # and use a pathname, as insmod doesn't look in . by default TARGET_PATH=/lib/modules/`uname -r`/kernel/drivers/net echo echo "Check old driver and unload it." check=`lsmod | grep r8169` if [ "$check" != "" ]; then echo "rmmod r8169" /sbin/rmmod r8169 fi check=`lsmod | grep r8101` if [ "$check" != "" ]; then echo "rmmod r8101" /sbin/rmmod r8101 fi echo "Build the module and install" echo "-------------------------------" >> log.txt date 1>>log.txt make all 1>>log.txt || exit 1 module=`ls src/*.ko` module=${module#src/} module=${module%.ko} if [ "$module" == "" ]; then echo "No driver exists!!!" exit 1 elif [ "$module" != "r8169" ]; then if test -e $TARGET_PATH/r8169.ko ; then echo "Backup r8169.ko" if test -e $TARGET_PATH/r8169.bak ; then i=0 while test -e $TARGET_PATH/r8169.bak$i do i=$(($i+1)) done echo "rename r8169.ko to r8169.bak$i" mv $TARGET_PATH/r8169.ko $TARGET_PATH/r8169.bak$i else echo "rename r8169.ko to r8169.bak" mv $TARGET_PATH/r8169.ko $TARGET_PATH/r8169.bak fi fi fi echo "Depending module. Please wait." depmod -a echo "load module $module" modprobe $module echo "Completed." exit 0

  Read the article

• Running Teamsite User Admin tool IWUSERADM.exe from ASP.NET

  - by Narendra Tiwari

  It has really been a head scratching task for me. I 've tried many options but nothing worked. Finally I found a workaround on google to achive this by TaskScheduler. PROBLEM When we run Teamsite user administration command line tool IWUSERADM.exe though ASP.Net it gives following error: Application popup: cmd.exe - Application Error : The application failed to initialize properly (0xc0000142). Click on OK to terminate the application. CAUSE No specific cause, it seems to be a bug, supposed to be resolved with this Microsoft patch http://support.microsoft.com/kb/960266. and there is nothing related to permission issue, y web application is impersonated with an administrator account. off course running a bat file from dmin account is a potential secury threat but for this scenario lets conifned our discussion to run the command line tool. RESOLUTION I have not tried this patch as I have not permitted to run this patch on server. Below are the steps to achive the requirement. 1/ Create a batch file which runs the IWUSERADM.exe.         echo - Add Teamsite User    CD E:\Appli\GN00\iw-home\bin    iwuseradm add-user %1 2/ Temporarily create a schedule task and run  the .bat file by scheduled task by ASP.Net code using TaskScheduler http://www.codeproject.com/KB/cs/tsnewlib.aspx. 3/ Here is the function: private int AddTeamsiteUser(string strBatchFilePath, string strUser) { //Get a ScheduledTasks object for the local computer. ScheduledTasks st = new ScheduledTasks(); // Create a task Task t; try{ t = st.CreateTask("~AddTeamsiteUser"); } catch { throw new Exception("Schedule Task ~AddTeamsiteUser already exist."); }    t.SetAccountInformation(yourLogin, yourPassword); //Set the account under which the task should run.  t.Save();  t.Run(); Thread.Sleep(2000); //for sync issue //Remove the scheduled task st.DeleteTask("~AddTeamsiteUser"); return t.ExitCode;   Below are few resources related to the above scenario:- - Task Scheduler Class Library for .NET  http://www.codeproject.com/KB/cs/tsnewlib.aspx - Run a .BAT file from ASP.NET  http://codebetter.com/blogs/brendan.tompkins/archive/2004/05/13/13484.aspx - TaskScheduler Class  http://msdn.microsoft.com/en-us/library/system.threading.tasks.taskscheduler.aspx - Application Hangs whle running iwuseradm.exe through ASP.Net  http://bytes.com/topic/asp-net/answers/733098-system-diagnostics-process-hangs     t.ApplicationName = strBatchFilePath; t.Parameters = strUser; t.Comment = "Adding user to Teamsite Application"

  Read the article

• Installed Ubuntu 14.04LTS

  - by user291729

  On my laptop which came pre-installed with Windows 8.1. Felt I needed to see the competition for myself to establish which was a better OS. So I followed the channels to dual boot. All seemed fine and I accessed Ubuntu with no issues after selecting this from the menu to select the OS. I should add that the boot method was changed to legacy. However, since using Ubuntu, I no longer have the ability to select the OS. The laptop simply logs straight into Ubuntu. I therefore attempted to access the recovery options, only it appears the Windows 8 bootloader has somehow been corrupted as I am now told to use the Windows 8 recovery disc (which, as this was pre-installed - I do not have). Left with no other alternative, I have scoured these forums without success, and so I am hoping someone in the know (or who has experienced similar) can help. I have tried boot repair again without success. On rebooting I am only presented with a basic splash screen asking me to select Ubuntu, Memtest, Windows 8 Recovery or Windows 8 Bootloader (The bootloaders again require I insert the disc). I have tried Code: cat /boot/grub/grub.cfg df -h sudo fdisk -l cat /proc/partitions # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda9 84G 7.1G 73G 9% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 3.9G 4.0K 3.9G 1% /dev tmpfs 794M 1.4M 793M 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 80K 3.9G 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sdc1 7.5G 2.2G 5.4G 29% /media/john/DYLANMUSIC /dev/sr0 964M 964M 0 100% /media/john/Ubuntu 14.04 LTS amd64 /dev/sdb1 1.9T 892G 972G 48% /media/john/Storage Main WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4e2ccf75 Device Boot Start End Blocks Id System /dev/sda1 1 1953525167 976762583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 8011 MB, 8011120640 bytes 41 heads, 41 sectors/track, 9307 cylinders, total 15646720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 15646719 7819328 b W95 FAT32 Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7d968ff Device Boot Start End Blocks Id System /dev/sdb1 64 3907029119 1953514528 7 HPFS/NTFS/exFAT major minor #blocks name 8 0 976762584 sda 8 1 266240 sda1 8 2 1509376 sda2 8 3 266240 sda3 8 4 131072 sda4 8 5 841012780 sda5 8 6 358400 sda6 8 7 35376128 sda7 8 8 1024 sda8 8 9 89501696 sda9 8 10 8337408 sda10 11 0 987136 sr0 8 32 7823360 sdc 8 33 7819328 sdc1 8 16 1953514584 sdb 8 17 1953514528 sdb1 I am no expert on this and I'm at a loss as how to correct this without having to re-format everything and reinstall Windows 8. However, if I'm to try using Ubuntu again then there is the risk this problem may come back. Again, I did not do anything manually - the installer did everything (with the exception of changing the boot to Legacy to allow the booting of another bootloader). LiveCD works but doesn't give me the options that I've seen here and as mentioned earlier, only boot recovery only gives me the options as mentioned earlier. Also this fails to load via USB (possibly because HDD comes before USB in the boot order?). Being used to a Windows environment, the Ubuntu (and Linux) environment is a dive at a less than comfortable depth at present (but one I fully intend to get to grips with - especially the commands being more common via Terminal). I very much appreciate the help with this guys.

  Read the article

• Single-Signon options for Exchange 2010

  - by freiheit

  We're working on a project to migrate employee email from Unix/open-source (courier IMAP, exim, squirrelmail, etc) to Exchange 2010, and trying to figure out options for single-signon for Outlook Web Access. So far all the options I've found are very ugly and "unsupportable", and may simply not work with Forefront. We already have JA-SIG CAS for token-based single-signon and Shibboleth for SAML. Users are directed to a simple in-house portal (a Perl CGI, really) that they use to sign in to most stuff. We have an HA OpenLDAP cluster that's already synchronized against another AD domain and will be synchronized with the AD domain Exchange will be using. CAS authenticates against LDAP. The portal authenticates against CAS. Shibboleth authenticates with CAS but pulls additional data from LDAP. We're moving in the direction of having web services authenticate against CAS or Shibboleth. (Students are already on SAML/Shibboleth authenticated Google Apps for Education) With Squirrelmail we have a horrible hack linked to from that portal page that authenticates against CAS, gets your original plaintext password (yes, I know, evil), and gives you an HTTP form pre-filled with all the necessary squirrelmail login details with javaScript onLoad stuff to immediately submit the form. Trying to find out exactly what is possible with Exchange/OWA seems to be difficult. "CAS" is both the acronym for our single-signon server and an Exchange component. From what I've been able to tell there's an addon for Exchange that does SAML, but only for federating things like free/busy calendar info, not authenticating users. Plus it costs additional money so there's no way to experiment with it to see if it can be coaxed into doing what we want. Our plans for the Exchange cluster involve Forefront Threat Management Gateway (the new ISA) in the DMZ front-ending the CAS servers. So, the real question: Has anybody managed to make Exchange authenticate with CAS (token-based single-signon) or SAML, or with something I can reasonably likely make authenticate with one of those (such as anything that will accept apache's authentication)? With Forefront? Failing that, anybody have some tips on convincing OWA Forms Based Authentication (FBA) into letting us somehow "pre-login" the user? (log in as them and pass back cookies to the user, or giving the user a pre-filled form that autosubmits like we do with squirrelmail). This is the least-favorite option for a number of reasons, but it would (just barely) satisfy our requirements. From what I hear from the guy implementing Forefront, we may have to set OWA to basic authentication and do forms in Forefront for authentication, so it's possible this isn't even possible. I did find CasOwa, but it only mentions Exchange 2007, looks kinda scary, and as near as I can tell is mostly the same OWA FBA hack I was considering slightly more integrated with the CAS server. It also didn't look like many people had had much success with it. And it may not work with Forefront. There's also "CASifying Outlook Web Access 2", but that one scares me, too, and involves setting up a complex proxy config, which seems more likely to break. And, again, doesn't look like it would work with Forefront. Am I missing something with Exchange SAML (OWA Federated whatchamacallit) where it is possible to configure to do user authentication and not just free/busy access authorization?

  Read the article

• How to install Awesome WM without root access?

  - by ssice

  I want to install the Awesome window manager. In the environment where I want to configure it I don't have root access. I do have a machine were I can be root (I use for this a virtual machine in my laptop). I have tried the following: $ sudo apt-get install awesome The following packages are about to be installed: awesome libev3 libid3tag0 libimlib2 liblua5.1-0 libxcb-icccm1 libxcb-image0 libxcb-keysyms1 libxcb-property1 libxcb-randr0 libxcb-xinerama0 libxcb-xtest0 libxdg-basedir1 menu rlwrap Do you want to continue [Y/n]? n I do now have the list of dependencies for awesome, so I downloaded them all. For that, I did the following. $ pkgs="awesome libev3 libid3tag0 libimlib2 liblua5.1-0 libxcb-icccm1 libxcb-image0 libxcb-keysyms1 libxcb-property1 libxcb-randr0 libxcb-xinerama0 libxcb-xtest0 libxdg-basedir1 menu rlwrap" # this is just for not writing it all ;) $ sudo apt-get install --download-only $pkgs .... $ mkdir -p /tmp/x_debs $ for pkg in $pkgs; do cp /var/cache/apt/archives/$pkg* /tmp/x_debs/; done [ copies all *.deb from my dependencies to /tmp/x_debs ] Now, I want to install the dependencies. For that, I setup a fake dpkg install in my home folder: $ mkdir $HOME/root $ mkdir -p $HOME/root/var/lib/dpkg/{triggers,updates} $ touch $HOME/root/var/lib/dpkg/{available,status} Now I tried to install with dpkg, but I could not: $ dpkg --force-not-root --root=$HOME/root --recursive -i /tmp/x_debs It failed while trying to set permissions for the packages and running chroot. As I do have root access in this machine, I ran it with privileges: $ sudo dpkg --root=$HOME/root --recursive -i /tmp/x_debs Then I had a lot of stuff (i.e., everything: dependencies and the own WM) installed inside $HOME/root. Particularly, xcb-* libraries were installed in $HOME/root/usr/lib and the awesome binary in $HOME/root/usr/bin/awesome. If I try to execute awesome as is I get as an error that libraries could not be loaded. That's normal, as they are not in /usr/lib nor in /lib. So I ran export LD_LIBRARY_PATH=$HOME/root/usr/lib:$HOME/root/lib:${LD_LIBRARY_PATH} and awesome would try to load. However, I could not make gdm to run awesome within gnome or replacing it. I did it this way so I can copy everything in my $HOME/root folder, paste it in the other machine and have it running. Is there any other way (to have less wasted space maybe..) to do this? How can I tell gdm to exec awesome without root access?

  Read the article

• Beware of const members

  - by nmarun

  I happened to learn a new thing about const today and how one needs to be careful with its usage. Let’s say I have a third-party assembly ‘ConstVsReadonlyLib’ with a class named ConstSideEffect.cs: 1: public class ConstSideEffect 2: { 3: public static readonly int StartValue = 10; 4: public const int EndValue = 20; 5: } In my project, I reference the above assembly as follows: 1: static void Main(string[] args) 2: { 3: for (int i = ConstSideEffect.StartValue; i < ConstSideEffect.EndValue; i++) 4: { 5: Console.WriteLine(i); 6: } 7: Console.ReadLine(); 8: } You’ll see values 10 through 19 as expected. Now, let’s say I receive a new version of the ConstVsReadonlyLib. 1: public class ConstSideEffect 2: { 3: public static readonly int StartValue = 5; 4: public const int EndValue = 30; 5: } If I just drop this new assembly in the bin folder and run the application, without rebuilding my console application, my thinking was that the output would be from 5 to 29. Of course I was wrong… if not you’d not be reading this blog. The actual output is from 5 through 19. The reason is due to the behavior of const and readonly members. To begin with, const is the compile-time constant and readonly is a runtime constant. Next, when you compile the code, a compile-time constant member is replaced with the value of the constant in the code. But, the IL generated when you reference a read-only constant, references the readonly variable, not its value. So, the IL version of the Main method, after compilation actually looks something like: 1: static void Main(string[] args) 2: { 3: for (int i = ConstSideEffect.StartValue; i < 20; i++) 4: { 5: Console.WriteLine(i); 6: } 7: Console.ReadLine(); 8: } I’m no expert with this IL thingi, but when I look at the disassembled code of the exe file (using IL Disassembler), I see the following: I see our readonly member still being referenced by the variable name (ConstVsReadonlyLib.ConstSideEffect::StartValue) in line 0001. Then there’s the Console.WriteLine in line 000b and finally, see the value of 20 in line 0017. This, I’m pretty sure is our const member being replaced by its value which marks the upper bound of the ‘for’ loop. Now you know why the output was from 5 through 19. This definitely is a side-effect of having const members and one needs to be aware of it. While we’re here, I’d like to add a few other points about const and readonly members: const is slightly faster, but is less flexible readonly cannot be declared within a method scope const can be used only on primitive types (numbers and strings) Just wanted to share this before going to bed!

  Read the article

• apt-get broken + dependencies issue + many software uninstalled

  - by vnc786

  OS=ubuntu 12.04 64bit 3.2.0-29-generic what i did? apt-get purge libre* which i thought will remove LO 3.5 but, which was a big mistake after couple of moments, i realise that its is removing all other software so i did cltl-c which stopped the apt process i restarted my system after that i found that following software were missing apt-get,evince(pdf), cheese etc..here is full list http://pastebin.com/CWHrw10y i managed to install APT deb file through dpkg but now i am not able to do any installation so i just removed /var/lib/dpkg/status and created new but that didnt help apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: apt-utils coreutils debconf debconf-i18n dpkg libacl1 libapt-inst1.4 libapt-pkg4.12 libattr1 libbz2-1.0 libdb5.1 libgcc1 liblocale-gettext-perl liblzma5 libselinux1 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl perl-base tar tzdata xz-utils zlib1g Suggested packages: debconf-doc debconf-utils whiptail dialog gnome-utils libterm-readline-gnu-perl libgtk2-perl libnet-ldap-perl libqtgui4-perl libqtcore4-perl apt bzip2 ncompress xz-lzma The following NEW packages will be installed: apt-utils coreutils debconf debconf-i18n dpkg libacl1 libapt-inst1.4 libapt-pkg4.12 libattr1 libbz2-1.0 libdb5.1 libgcc1 liblocale-gettext-perl liblzma5 libselinux1 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl perl-base tar tzdata xz-utils zlib1g 0 upgraded, 24 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. Need to get 0 B/9,246 kB of archives. After this operation, 29.9 MB of additional disk space will be used. Do you want to continue [Y/n]? y E: Cannot get debconf version. Is debconf installed? debconf: apt-extracttemplates failed: No such file or directory dpkg: regarding .../libgcc1_1%3a4.6.3-1ubuntu5_amd64.deb containing libgcc1, pre-dependency problem: libgcc1 pre-depends on multiarch-support multiarch-support is unpacked, but has never been configured. dpkg: error processing /var/cache/apt/archives/libgcc1_1%3a4.6.3-1ubuntu5_amd64.deb (--unpack): pre-dependency problem - not installing libgcc1 No apport report written because MaxReports is reached already Errors were encountered while processing: /var/cache/apt/archives/libgcc1_1%3a4.6.3-1ubuntu5_amd64.deb E: Internal Error, No file name for libc6 W: Could not perform immediate configuration on 'multiarch-support:amd64'. Please see man 5 apt.conf under APT::Immediate-Configure for details. (2) E: Sub-process /usr/bin/dpkg returned an error code (1) # apt-get -u dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libc6 : Depends: libgcc1 but it is not installed Depends: tzdata but it is not installed E: Unmet dependencies. Try using -f. i have tried below link Unable to install due to debconf problem How do I resolve unmet dependencies? but no help... thanks

  Read the article

• Einladung zum Oracle Partner Day 2012

  - by A&C Redaktion

  EINLADUNG: ORACLE PARTNER DAY GERMANY - 29. Oktober 2012: COMMERZBANK ARENA, Frankfurt Sehr geehrter Oracle Partner, volle Kraft voraus! Unsere Neuausrichtung und Zusammenfassung der Ressourcen, die Sie sicherlich aufmerksam verfolgt haben, ist nun abgeschlossen. Wir sind sehr überzeugt davon, dass wir alle gemeinsam von diesen Veränderungen nachhaltig profitieren werden. Nur ein Stichwort dazu: „One Oracle Red Stack“. Oracle Alliances & Channels und seine Partner können ab sofort das komplette Oracle Produktportfolio bestehend aus Oracle Software Technology, Oracle Applications und Oracle Hardware anbieten – bei bestmöglichem Support aus unserer neuen Organisation. Mein Name ist Christian Werner. Ich bin seit einigen Wochen verantwortlich für alle Alliances & Channels Bereiche in Deutschland. Frau Silvia Kaske leitet jetzt den kompletten A&C Bereich in Europe North in der Funktion als Senior Director Europe North Alliances & Channel Sales. Willkommen an Bord! Was Sie als Oracle Partner davon erwarten können? Wir haben alle unsere Kräfte konzentriert. Aus drei eigenen Bereichen wird ein großes Ganzes. Für Sie bedeutet das: fokussiertes Wachstum, geballte Kompetenz und Supportinfrastruktur. Abgestimmte Prozesse und kürzere Zeiten für Approvals. Wir meinen: Die Zeit ist reif, um jetzt gemeinsam den Hebel auf „Volle Kraft voraus“ zu legen. Und die Bedingungen für Sie sind besser als jemals zuvor, wenn Sie Ihre Kundenbasis erweitern oder neue Marktbereiche erschließen wollen. Leinen los: Kommen Sie zum Oracle Partner Day, wenn Sie wissen wollen, was sich für Sie verbessern wird: am 29. Oktober 2012 in der Commerzbank Arena in Frankfurt. Treffen Sie Ihr neu aufgestelltes A&C-Team. Erleben Sie die Produktneuheiten von der Oracle Open World in San Francisco (30. September bis 4. Oktober 2012) aus erster Hand. Nutzen Sie das neue Speed Dating-Format mit ausgewählten Oracle Experten vor Ort – für konkrete Fragen zu Vertrieb und Produkten. Ganz besonders freue ich mich, dass dieses Jahr Jürgen Kunz, SVP Technology Northern Europe & Country Leader Germany, als Keynote Speaker dabei sein wird. Ich lade Sie ganz herzlich ein und freue mich, Sie in Frankfurt zu begrüßen! Die Teilnahme ist für Sie als Oracle Partner selbstverständlich kostenfrei. Hier finden Sie weitere Informationen zum Oracle Partner Day sowie die unkomplizierte Anmeldemöglichkeit. Ich freue mich auf Sie! Ihr Christian WernerSenior Director Alliances & Channels Germany Übrigens: Direkt nach dem Oracle Partner Day findet der Oracle Day für Endkunden statt. Sie als Partner können natürlich gemeinsam mit Ihren Kunden an dieser Veranstaltung teilnehmen. Bitte melden Sie sich schnell an, da die Plätze limitiert sind. Hier finden Sie weitere Infos zum Oracle Day.

  Read the article

• Einladung zum Oracle Partner Day 2012

  - by A&C Redaktion

  EINLADUNG: ORACLE PARTNER DAY GERMANY - 29. Oktober 2012: COMMERZBANK ARENA, Frankfurt Sehr geehrter Oracle Partner, volle Kraft voraus! Unsere Neuausrichtung und Zusammenfassung der Ressourcen, die Sie sicherlich aufmerksam verfolgt haben, ist nun abgeschlossen. Wir sind sehr überzeugt davon, dass wir alle gemeinsam von diesen Veränderungen nachhaltig profitieren werden. Nur ein Stichwort dazu: „One Oracle Red Stack“. Oracle Alliances & Channels und seine Partner können ab sofort das komplette Oracle Produktportfolio bestehend aus Oracle Software Technology, Oracle Applications und Oracle Hardware anbieten – bei bestmöglichem Support aus unserer neuen Organisation. Mein Name ist Christian Werner. Ich bin seit einigen Wochen verantwortlich für alle Alliances & Channels Bereiche in Deutschland. Frau Silvia Kaske leitet jetzt den kompletten A&C Bereich in Europe North in der Funktion als Senior Director Europe North Alliances & Channel Sales. Willkommen an Bord! Was Sie als Oracle Partner davon erwarten können? Wir haben alle unsere Kräfte konzentriert. Aus drei eigenen Bereichen wird ein großes Ganzes. Für Sie bedeutet das: fokussiertes Wachstum, geballte Kompetenz und Supportinfrastruktur. Abgestimmte Prozesse und kürzere Zeiten für Approvals. Wir meinen: Die Zeit ist reif, um jetzt gemeinsam den Hebel auf „Volle Kraft voraus“ zu legen. Und die Bedingungen für Sie sind besser als jemals zuvor, wenn Sie Ihre Kundenbasis erweitern oder neue Marktbereiche erschließen wollen. Leinen los: Kommen Sie zum Oracle Partner Day, wenn Sie wissen wollen, was sich für Sie verbessern wird: am 29. Oktober 2012 in der Commerzbank Arena in Frankfurt. Treffen Sie Ihr neu aufgestelltes A&C-Team. Erleben Sie die Produktneuheiten von der Oracle Open World in San Francisco (30. September bis 4. Oktober 2012) aus erster Hand. Nutzen Sie das neue Speed Dating-Format mit ausgewählten Oracle Experten vor Ort – für konkrete Fragen zu Vertrieb und Produkten. Ganz besonders freue ich mich, dass dieses Jahr Jürgen Kunz, SVP Technology Northern Europe & Country Leader Germany, als Keynote Speaker dabei sein wird. Ich lade Sie ganz herzlich ein und freue mich, Sie in Frankfurt zu begrüßen! Die Teilnahme ist für Sie als Oracle Partner selbstverständlich kostenfrei. Hier finden Sie weitere Informationen zum Oracle Partner Day sowie die unkomplizierte Anmeldemöglichkeit. Ich freue mich auf Sie! Ihr Christian WernerSenior Director Alliances & Channels Germany Übrigens: Direkt nach dem Oracle Partner Day findet der Oracle Day für Endkunden statt. Sie als Partner können natürlich gemeinsam mit Ihren Kunden an dieser Veranstaltung teilnehmen. Bitte melden Sie sich schnell an, da die Plätze limitiert sind. Hier finden Sie weitere Infos zum Oracle Day.

  Read the article

• Mysql-server-5.5 broken after update

  - by WalrusTusks

  Using Ubuntu 12.04, desktop, I had LAMP installed on my computer, and was using it as a server. However, after doing the upgrades one day, apt-get throws an error that mysql-server can't be configured, as it depends on another package: jay@rumbles:~$ sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: mysql-server-5.5 : Depends: mysql-server-core-5.5 (= 5.5.22-0ubuntu1) but 5.5.24-0ubuntu0.12.04.1 is installed E: Unmet dependencies. Try using -f ` jay@rumbles:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: mysql-server-5.5 Suggested packages: tinyca mailx The following packages will be upgraded: mysql-server-5.5 1 upgraded, 0 newly installed, 0 to remove and 35 not upgraded. 2 not fully installed or removed. Need to get 0 B/8,821 kB of archives. After this operation, 2,048 B of additional disk space will be used. Do you want to continue [Y/n]? y dpkg: dependency problems prevent configuration of mysql-server-5.5: mysql-server-5.5 depends on mysql-server-core-5.5 (= 5.5.22-0ubuntu1); however: Version of mysql-server-core-5.5 on system is 5.5.24-0ubuntu0.12.04.1. dpkg: error processing mysql-server-5.5 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) How can I fix this?

  Read the article

• apt-get install is not able to access /etc

  - by HorusKol

  I put together an ubuntu 12.04 server a couple of weeks ago and everything seemed fine until this morning. Suddenly, I'm having trouble installing new packages - at first I thought there was something wrong with tinyproxy and so I tried installing squid instead. However, I get similar results: Starting tinyproxy: tinyproxy: Could not open config file "/etc/tinyproxy.conf".\ ... /var/lib/dpkg/info/squid3.postinst: 1: /var/lib/dpkg/info/squid3.postinst: cannot open /etc/squid3/squid.conf: No such file It seems that apt-get is not creating the configuration files needed for these programs. I haven't modified any configuration or user groups since the last successful update/install of packages. /etc is present, and is populated with a nice healthy tree of configuration files. It is owned and grouped to root, and has the properties drwxr-xr-x - all the files and folders inside seem to be fine to, as far as I can tell. I've even been able to edit/save a couple as sudo. Full output from installing tinyproxy: Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: tinyproxy 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/61.6 kB of archives. After this operation, 201 kB of additional disk space will be used. Selecting previously unselected package tinyproxy. (Reading database ... 58916 files and directories currently installed.) Unpacking tinyproxy (from .../tinyproxy_1.8.3-1_amd64.deb) ... Processing triggers for ureadahead ... Processing triggers for man-db ... Setting up tinyproxy (1.8.3-1) ... Starting tinyproxy: tinyproxy: Could not open config file "/etc/tinyproxy.conf". invoke-rc.d: initscript tinyproxy, action "start" failed. dpkg: error processing tinyproxy (--configure): subprocess installed post-installation script returned error exit status 70 Errors were encountered while processing: tinyproxy E: Sub-process /usr/bin/dpkg returned an error code (1) Result of strace after installation: 18467 open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 18467 open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 18467 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\30\2\0\0\0\0\0"..., 832) = 832 18467 open("/etc/tinyproxy.conf", O_RDONLY) = -1 ENOENT (No such file or directory)

  Read the article

• How do you exclude yourself from Google Analytics on your website using cookies?

  - by Keoki Zee

  I'm trying to set up an exclusion filter with a browser cookie, so that my own visits to my don't show up in my Google Analytics. I tried 3 different methods and none of them have worked so far. I would like help understanding what I am doing wrong and how I can fix this. Method 1 First, I tried following Google's instructions, http://www.google.com/support/analytics/bin/answer.py?hl=en&answer=55481, for excluding traffic by Cookie Content: Create a new page on your domain, containing the following code: <body onLoad="javascript:pageTracker._setVar('test_value');"> Method 2 Next, when that didn't work, I googled around and found this Google thread, http://www.google.com/support/forum/p/Google%20Analytics/thread?tid=4741f1499823fcd5&hl=en, where the most popular answer says to use a slightly different code: SHS Analytics wrote: <body onLoad="javascript:_gaq.push(['_setVar','test_value']);"> Thank you! This has now set a __utmv cookie containing "test_value", whereas the original: pageTracker._setVar('test_value') (which Google is still recommending) did not manage to do that for me (in Mac Safari 5 and Firefox 3.6.8). So I tried this code, but it didn't work for me. Method 3 Finally, I searched StackOverflow and came across this thread, http://stackoverflow.com/questions/3495270/exclude-my-traffic-from-google-analytics-using-cookie-with-subdomain, which suggests that the following code might work: <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setVar', 'exclude_me']); _gaq.push(['_setAccount', 'UA-xxxxxxxx-x']); _gaq.push(['_trackPageview']); // etc... </script> This script appeared in the head element in the example, instead of in the onload event of the body like in the previous 2 examples. So I tried this too, but still had no luck with trying to exclude myself from Google Analytics. Re-iterate question So, I tried all 3 methods above with no success. Am I doing something wrong? How can I exclude myself from my Google Analytics using an exclusion cookie for my browser?

  Read the article

• Do I have to worry about "error: superfluous RAID member"?

  - by 0xC0000022L

  When running update-grub on the newly installed Ubuntu 12.04 with an older software RAID (md), I get: error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). Generating grub.cfg ... error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). Found linux image: /boot/vmlinuz-3.2.0-24-generic Found initrd image: /boot/initrd.img-3.2.0-24-generic error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). Found linux image: /boot/vmlinuz-3.2.0-23-generic Found initrd image: /boot/initrd.img-3.2.0-23-generic error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). Found memtest86+ image: /boot/memtest86+.bin error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). Found Debian GNU/Linux (5.0.9) on /dev/sdb1 Found Debian GNU/Linux (5.0.9) on /dev/sdc1 done I would be less worried if the message would say warning: ..., but since it says error: ... I'm wondering what the problem is. # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sdc1[1] sdb1[0] 48829440 blocks [2/2] [UU] md3 : active raid1 sdc2[1] sdb2[0] 263739008 blocks [2/2] [UU] md1 : active raid5 sdg1[3] sdf1[2] sde1[1] sdh1[0] sdi1[4] sdd1[5](S) 1250274304 blocks level 5, 64k chunk, algorithm 2 [5/5] [UUUUU] unused devices: <none> Do I have to worry or is this harmless? btw: disregard the mentioning of Debian 5.0.9, that was the previously installed system and is going to be overwritten. It's on /dev/md2 actually.

  Read the article

• Generating Report for NUnit

  - by thangchung

   All source codes for this post can be found at my github.Time ago, I received a request that people ask me how they can generate reports of the results of testing using NUnit? In fact, I may never do this. In the little world of my programming, I only care about the test results, red-green-refactoring, and that was it. When I got that question quite a bit unexpected, I knew that I could use NCover to generate reports, but reports of NCover too simple, it did not give us more details on the number of test cases, test methods, ... And I began to see about creating interesting report for NUnit.I was lucky to find an open source here. Its authors call it NUnit2Report, but one disadvantage is it only running on .NET 1.0. Indeed too old compared to the current version 4.0. And I try to download the preview, but I could not run. I had to open its source code and found that it uses XSLT to convert the output of NUnit results from XML to HTML. Nothing really special, because I also knew that after NUnit run output file extension is XML is created. Author only use this file to convert to HTML using XSLT. And I decided to convert it to. NET 4.0, because I will not have to code from scratch. Conversion work made me take some time, but was lucky that I finally have what I want. Thanks Gilles for the this OSS. I will send a mail to thank him for his efforts but put this out for the OSS. Now I will show people how to do it. I used the auto built NAnt and NUnit for running TestCase, and I use Selenium testing framework. After writing three TestCase using Selenium, I ran NUnit, and got the following results: There are 1 fail and 2s success. In the bin directory of this project will have the NUnit output file as shown below: Then I create a build file, and a bat file for easy running (can use PowerShell is here also.) Double click in the bat file to create a report like this:       Finally open the index.html file in the folder to view report. As everyone can see, it is the TestCase and divide very clearly, that I meet the requirements. This is really good. Once again I really thank NUnit2Report from Gilles. People can contact him via the mail address [email protected] or website  http://nunit2report.sourceforge.net. It really is useful to those who promised to QA. Hopefully this post will help anyone really interested in doing reports for NUnit.   

  Read the article

• Xorg.conf (nvidia) Second Monitor getting settings of first

  - by HennyH

  I've been spending the weekend (and some time before that) trying to set up my Korean QHD270 and Benq G2222HDL monitors with Ubuntu 13.10. With the nouveau drivers install both monitor function perfectly fine. After installing the nvidia drivers the Benq works but the QHD270 does not. Now, after days of struggling I managed to get the QHD270 to work following a mixture of blogs, particularly; this one and learnitwithme. Now, unfortunatly my G2222HDL does not work. I fixed the QHD270 by supplying a custom EDID, my xorg.conf looks like so (excluding keyboard and mouse): Section "ServerLayout" Identifier "Layout0" Screen "Default Screen" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Device" Identifier "Configured Video Device" Driver "nvidia" Option "CustomEDID" "DFP:/etc/X11/edid-shimian.bin" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Now, I tried defining a new Device,Monitor and Screen then in ServerLayout adding Screen "Second Screen" RightOf "Default Screen", but after doing so neither monitor worked. Hoping to fix the issue using a GUI based tool I opened up NVIDIA X Server Settings, which shows my current layout as: It seems that something is being output to the monitor, as suggested by my print screen: Any help would be greatly appreciated. Output of xrandr: Screen 0: minimum 8 x 8, current 5120 x 1440, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 597mm x 336mm 2560x1440 60.0*+ HDMI-0 disconnected (normal left inverted right x axis y axis) DP-0 disconnected (normal left inverted right x axis y axis) DVI-D-0 connected 2560x1440+2560+0 (normal left inverted right x axis y axis) 597mm x 336mm 2560x1440 60.0*+ DP-1 disconnected (normal left inverted right x axis y axis) And an extract from my log file (perhaps this is relevant?) [ 7.862] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680 at PCI:2:0:0 [ 7.862] (--) NVIDIA(0): CRT-0 [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0) (boot, connected) [ 7.862] (--) NVIDIA(0): DFP-1 [ 7.862] (--) NVIDIA(0): DFP-2 [ 7.862] (--) NVIDIA(0): DFP-3 [ 7.862] (--) NVIDIA(0): DFP-4 [ 7.862] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0): 330.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0): Internal Dual Link TMDS [ 7.862] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-4: Internal DisplayPort

  Read the article

• "Shared Folders" Feature Is Not Working In VirtualBox

  - by Islam Hassan

  I have Ubuntu 11.10 as a host and another linux 2.6 distribution as a guest. When I try to setup guest additions, this error message appears Building the shared folder support module .. fail And because of that, when I run the following in terminal mount -t vboxsf shared /root/shared I get the following error message mount: unknown filesystem type 'vboxsf' Any syggestions please? EDIT Sorry, the mentioned error message isn't complete, this is it. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) This is the content of vboxadd-install.log Uninstalling modules from DKMS Attempting to install using DKMS Creating symlink /var/lib/dkms/vboxguest/4.1.2/source -> /usr/src/vboxguest-4.1.2 DKMS: add Completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... make KERNELRELEASE=3.2.6 -C /lib/modules/3.2.6/build M=/var/lib/dkms/vboxguest/4.1.2/build..........................(bad exit status: 2) Error! Bad return status for module build on kernel: 3.2.6 (i686) Consult the make.log in the build directory /var/lib/dkms/vboxguest/4.1.2/build/ for more information. 0 0 ERROR: binary package for vboxguest: 4.1.2 not found Failed to install using DKMS, attempting to install without make KBUILD_VERBOSE=1 -C /lib/modules/3.2.6/build SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo; \ /bin/false) mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/* WARNING: Symbol version dump /usr/src/linux-source-3.2.6/Module.symvers is missing; modules will have no dependencies and modversions. Actually the log file is very large and it exceeds the 30000 characters limit. How can I upload the entire log file here?

  Read the article

• Ubuntu on Pandaboard giving me troubles

  - by Jeroen Jacobs

  I'm trying to install the OMAP4 extras for ubuntu on my pandaboard. For some reason, a few packages can't seem to be agree with eachother. This what I did so far: installed on Ubuntu 11.10 on sd card Powered on Pandaboard and let it finish it's initial install Did an "apt-get update" and "apt-get upgrade", to install updates So far, everything went fine, and I was quite happy with my Pandaboard, but then I made the mistake of typing this: apt-get install ubuntu-imap4-extras At first, everything seemed ok, and it started downloading and installing. But then after a while it just crashed. I tried it again but then it gave me this: Reading package lists... Done Building dependency tree Reading state information... Done ubuntu-omap4-extras is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: gstreamer0.10-openmax : Depends: gstreamer0.10-plugins-bad but it is not going to be installed gstreamer0.10-plugin-ducati : Depends: gstreamer0.10-plugins-bad but it is not going to be installed ubuntu-omap4-extras-multimedia : Depends: gstreamer0.10-plugins-bad (>= 0.10.22-2ubuntu4+ti1.5) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). So I tried to the suggestion: apt-get -f install: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: gstreamer0.10-plugins-bad The following NEW packages will be installed: gstreamer0.10-plugins-bad 0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded. 88 not fully installed or removed. Need to get 0 B/1,794 kB of archives. After this operation, 4,571 kB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 143575 files and directories currently installed.) Unpacking gstreamer0.10-plugins-bad (from .../gstreamer0.10-plugins bad_0.10.22-2ubuntu4+ti1.5.4.8+1_armel.deb) ... dpkg: error processing /var/cache/apt/archives/gstreamer0.10-plugins-bad_0.10.22-2ubuntu4+ti1.5.4.8+1_armel.deb (--unpack): trying to overwrite '/usr/lib/libgstbasecamerabinsrc-0.10.so.0.0.0', which is also in package gstreamer0.10-plugins-good 0.10.30-1ubuntu7.1 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/gstreamer0.10-plugins-bad_0.10.22-2ubuntu4+ti1.5.4.8+1_armel.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Seems like two packages (plugins-good and plugins-bad) are fighting over the same library. Any idea on how to fix this??

  Read the article

• All PHP sites stopped working on IIS7, internal server error 500

  - by TimothyP

  I installed multiple drupal 7 sites using the Web Platform Installer on Windows Server 2008. Until know they worked without any problems, but recently internal server error 500 started to show up (once every so many requests), now it happens for all requests to any of the php sites. There's not much detail to go on, and nothing changed between the time when it was working and now (well nothing I know of anyway) The log file is flooded with messages such as [09-Aug-2011 09:08:04] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:16] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:16] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:20] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:22] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:51] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:09:56] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:09:57] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:12:13] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:15:09] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:15:09] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:21:28] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:21:28] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 I have tried increasing the memory limit in php.ini as such: memory_limit = 512MB But that doesn't seem to solve the problem either. This is in the global php configuration in IIS When I looked at the sites one by one, I noticed that PHP seemed to have been disabled. PHP is not enabled. Register new PHP version to enable PHP via FastCGI So I tried to register the php version again C:\Program Files\PHP\v5.3\php-cgi.exe But when I try to apply the changes I get There was an error while performing this operation Details: Operation is not valid due to the current state of the object There doesn't seem to be any other information than that. I have no idea why all of a sudden php isn't available for the sites anymore. PS: I have rebooted IIS, the server, etc... This server is hosted on amazon S3, so I gave the server some more power Update These seem to be two different issues I used memory_limit=128MB instead of memory_limit=128M Notice the "M" instead of "MB" A memory_limit of 128M was not enough, had to increase it to 512M The first issue caused internal server errors for every request. Increasing to 512MB seemed to have solved the problem for a little while, but after a while the server errors return. Note that the PHP manager inside of IIS still shows there is no PHP available for the sites (the global config does see it as available) So the problem remains unsolved

  Read the article

• Backup a hosted Sharepoint

  - by David Mackintosh

  One of my customers has outsourced their Sharepoint and Exchange services to a hosted services provider. I believe it is a Sharepoint 2007 service. It is a shared hosting solution, so we do not have any kind of access to the server itself; we only have user-level and sharepoint-administrator-level access to the Sharepoint application. They have come to the point where they would like to have a copy of everything that is on the Sharepoint server. I have downloaded the Office Sharepoint Designer 2007, and it features three (!) ways to backup a Sharepoint server, none (!) of which work for me: File-Export-Personal Web Package: When selecting everything, it calculates a negative size. Barfs with No "content-type" in CGI environment error. File-Export-Sharepoint Template: barfs with a A World Wide Web browser, such as Windows Internet Explorer, is required to use this feature error. Site-Administration-Backup Web Site: wants to create the backup .cmp file on the sharepoint server itself. I don't have access to any servers on the same network so I can't redirect it to any form of the suggested \\server\place. Barfs with a The Web application at $URL could not be found. [...] error. Possibly moot because Google tells me that bad things happen using OSD to back up sites larger than 24MB (which this site is most definitely). So I called the helpdesk of the outsource provider, and got told that they recommend using OSD, but no they don't actually provide any application support for OSD (not that I blame them for that), but they could do a stsadm.exe backup and provide us with that, and OSD should be able to read the resulting cmp file. Then for authorization reasons they had my customer call them directly (since I can't authorize such an operation), and they told him that he didn't want a stsadm.exe backup, he wanted to get into an 'explorer view' and deal with things that way (they were vague). Google hasn't been much help in figuring out what an 'explorer view' is, let alone how I bring one up. The end goal of this operation is to have a backup of the site as it exists (hopefully today, but shortly anyways) in such a format that we don't need another sharepoint server to restore it to. Ie we'd like to be able to pick individual content directly out of this backup. We are not excessively concerned with things like formatting. We just want the documents. This is a fairly complex site with multiple subsites and multiple folders per subsite, so sitting there and manually downloading each file isn't really going to happen if there is a better easier way. So, my questions: Is the stsadm.exe backup what I want? If not, what do I want? If I manage to convince them that I do want the stsadm.exe backup, can I pick files out of the resulting backup file with OSD? If OSD isn't going to let me extract individual files, is there a tool I can use that can?

  Read the article

• How to force a new Notification in notify-osd to show up without waiting for the earlier one to exit?

  - by Nirmik

  I have made a script(and a .desktop shortcut leading to this script) for starting and stoping xampp... It checks the status of xampp and accordingly either starts or stops xampp. Now i have assigned a notification as soon as the script is started to display "Starting xampp..." or "Stopping xampp..." and then when xampp is started or stopped,it displays "Xampp started..." or "Xampp stopped..." I've used notify-send to show notification as seen in the script below Now the thing is that here,the second notification waits for the 1st one to disappear and then pops up even if xampp has started/stopped. I want the new notification to appear immediately by forcing the earlier one to exit before the completion of its life-cycle. This can be seen to take plce when you activate/deactivate wireless/networking immediately... For example the "Wireless enabled" comes up on selecting enable wireless and if you immediately select disable wireless,the "Wireless disabled" notification comes up without waiting for "Wireless enabled" notification to complete its life-cycle. So how do i achieve this? #!/bin/sh SERVICE='proftpd' if ps ax | grep -v grep | grep $SERVICE /dev/null then notify-send -i /opt/lampp/htdocs/xampp/img/logo-small.gif "Stopping XAMPP..." && gksudo /opt/lampp/lampp stop && notify-send -i /opt/lampp/htdocs/xampp/img/logo- small.gif "XAMPP Stoped." else notify-send -i /opt/lampp/htdocs/xampp/img/logo-small.gif "Starting XAMPP..." && gksudo /opt/lampp/lampp start && notify-send -i /opt/lampp/htdocs/xampp/img/logo-small.gif "XAMPP Started." fi On the man page for notify-send I found --urgency=LEVEL or -u where levels are low, normal, critical. Is this of any use? making it critical? Also I tried it with the command- notify-send -u=critical"Testing" but that dint work...it gives the error- Unknown urgency criticalTesting specified. Known urgency levels: low, normal, critical. or if I give the command notify-send -u=LOW"Testing" it gives me error missing argument to -u Any relation??

  Read the article

• .htaccess template, suggestions needed.

  - by purpler

  I compiled myself a .htaccess template and would like to know whether the caching and compressions is set up right, constructive suggestions and critics needed. # Defaults AddDefaultCharset UTF-8 DefaultLanguage en-US FileETag None Header unset ETag ServerSignature Off SetEnv TZ Europe/Belgrade # Rewrites Options +FollowSymLinks RewriteEngine On RewriteBase / # Redirect to WWW RewriteCond %{HTTP_HOST} ^serpentineseo.com RewriteRule (.*) http://www.serpentineseo.com/$1 [R=301,L] # Redirect index to root RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*index\.html\ HTTP/ RewriteRule ^(.*)index\.html$ /$1 [R=301,L] # Cache media files: ExpiresActive On ExpiresDefault A0 # Month <filesMatch "\.(gif|jpg|jpeg|png|ico|swf|js)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> # Week <FilesMatch "\.(css|pdf)$"> Header set Cache-Control "max-age=604800" </FilesMatch> # 10 Min <FilesMatch "\.(html|htm|txt)$"> Header set Cache-Control "max-age=600" </FilesMatch> # Do not cache <FilesMatch "\.(pl|php|cgi|spl|scgi|fcgi)$"> Header unset Cache-Control </FilesMatch> # Compress output <IfModule mod_deflate.c> <FilesMatch "\.(html|js|css)$"> SetOutputFilter DEFLATE </FilesMatch> </IfModule> # Error Documents ErrorDocument 206 /error/206.html ErrorDocument 401 /error/401.html ErrorDocument 403 /error/403.html ErrorDocument 404 /error/404.html ErrorDocument 500 /error/500.html # Prevent hotlinking RewriteCond %{HTTP_REFERER} !^$ RewriteCond %{HTTP_REFERER} !^http://(www\.)?serpentineseo.com/.*$ [NC] RewriteRule \.(gif|jpg|png)$ http://www.serpentineseo.com/images/angryman.png [R,L] # Prevent offline browsers RewriteCond %{HTTP_USER_AGENT} ^BlackWidow [OR] RewriteCond %{HTTP_USER_AGENT} ^Bot\ mailto:[email protected] [OR] RewriteCond %{HTTP_USER_AGENT} ^ChinaClaw [OR] RewriteCond %{HTTP_USER_AGENT} ^Custo [OR] RewriteCond %{HTTP_USER_AGENT} ^DISCo [OR] RewriteCond %{HTTP_USER_AGENT} ^Download\ Demon [OR] RewriteCond %{HTTP_USER_AGENT} ^eCatch [OR] RewriteCond %{HTTP_USER_AGENT} ^EirGrabber [OR] RewriteCond %{HTTP_USER_AGENT} ^EmailSiphon [OR] RewriteCond %{HTTP_USER_AGENT} ^EmailWolf [OR] RewriteCond %{HTTP_USER_AGENT} ^Express\ WebPictures [OR] RewriteCond %{HTTP_USER_AGENT} ^ExtractorPro [OR] RewriteCond %{HTTP_USER_AGENT} ^EyeNetIE [OR] RewriteCond %{HTTP_USER_AGENT} ^FlashGet [OR] RewriteCond %{HTTP_USER_AGENT} ^GetRight [OR] RewriteCond %{HTTP_USER_AGENT} ^GetWeb! [OR] RewriteCond %{HTTP_USER_AGENT} ^Go!Zilla [OR] RewriteCond %{HTTP_USER_AGENT} ^Go-Ahead-Got-It [OR] RewriteCond %{HTTP_USER_AGENT} ^GrabNet [OR] RewriteCond %{HTTP_USER_AGENT} ^Grafula [OR] RewriteCond %{HTTP_USER_AGENT} ^HMView [OR] RewriteCond %{HTTP_USER_AGENT} HTTrack [NC,OR] RewriteCond %{HTTP_USER_AGENT} ^Image\ Stripper [OR] RewriteCond %{HTTP_USER_AGENT} ^Image\ Sucker [OR] RewriteCond %{HTTP_USER_AGENT} Indy\ Library [NC,OR] RewriteCond %{HTTP_USER_AGENT} ^InterGET [OR] RewriteCond %{HTTP_USER_AGENT} ^Internet\ Ninja [OR] RewriteCond %{HTTP_USER_AGENT} ^JetCar [OR] RewriteCond %{HTTP_USER_AGENT} ^JOC\ Web\ Spider [OR] RewriteCond %{HTTP_USER_AGENT} ^larbin [OR] RewriteCond %{HTTP_USER_AGENT} ^LeechFTP [OR] RewriteCond %{HTTP_USER_AGENT} ^Mass\ Downloader [OR] RewriteCond %{HTTP_USER_AGENT} ^MIDown\ tool [OR] RewriteCond %{HTTP_USER_AGENT} ^Mister\ PiX [OR] RewriteCond %{HTTP_USER_AGENT} ^Navroad [OR] RewriteCond %{HTTP_USER_AGENT} ^NearSite [OR] RewriteCond %{HTTP_USER_AGENT} ^NetAnts [OR] RewriteCond %{HTTP_USER_AGENT} ^NetSpider [OR] RewriteCond %{HTTP_USER_AGENT} ^Net\ Vampire [OR] RewriteCond %{HTTP_USER_AGENT} ^NetZIP [OR] RewriteCond %{HTTP_USER_AGENT} ^Octopus [OR] RewriteCond %{HTTP_USER_AGENT} ^Offline\ Explorer [OR] RewriteCond %{HTTP_USER_AGENT} ^Offline\ Navigator [OR] RewriteCond %{HTTP_USER_AGENT} ^PageGrabber [OR] RewriteCond %{HTTP_USER_AGENT} ^Papa\ Foto [OR] RewriteCond %{HTTP_USER_AGENT} ^pavuk [OR] RewriteCond %{HTTP_USER_AGENT} ^pcBrowser [OR] RewriteCond %{HTTP_USER_AGENT} ^RealDownload [OR] RewriteCond %{HTTP_USER_AGENT} ^ReGet [OR] RewriteCond %{HTTP_USER_AGENT} ^SiteSnagger [OR] RewriteCond %{HTTP_USER_AGENT} ^SmartDownload [OR] RewriteCond %{HTTP_USER_AGENT} ^SuperBot [OR] RewriteCond %{HTTP_USER_AGENT} ^SuperHTTP [OR] RewriteCond %{HTTP_USER_AGENT} ^Surfbot [OR] RewriteCond %{HTTP_USER_AGENT} ^tAkeOut [OR] RewriteCond %{HTTP_USER_AGENT} ^Teleport\ Pro [OR] RewriteCond %{HTTP_USER_AGENT} ^VoidEYE [OR] RewriteCond %{HTTP_USER_AGENT} ^Web\ Image\ Collector [OR] RewriteCond %{HTTP_USER_AGENT} ^Web\ Sucker [OR] RewriteCond %{HTTP_USER_AGENT} ^WebAuto [OR] RewriteCond %{HTTP_USER_AGENT} ^WebCopier [OR] RewriteCond %{HTTP_USER_AGENT} ^WebFetch [OR] RewriteCond %{HTTP_USER_AGENT} ^WebGo\ IS [OR] RewriteCond %{HTTP_USER_AGENT} ^WebLeacher [OR] RewriteCond %{HTTP_USER_AGENT} ^WebReaper [OR] RewriteCond %{HTTP_USER_AGENT} ^WebSauger [OR] RewriteCond %{HTTP_USER_AGENT} ^Website\ eXtractor [OR] RewriteCond %{HTTP_USER_AGENT} ^Website\ Quester [OR] RewriteCond %{HTTP_USER_AGENT} ^WebStripper [OR] RewriteCond %{HTTP_USER_AGENT} ^WebWhacker [OR] RewriteCond %{HTTP_USER_AGENT} ^WebZIP [OR] RewriteCond %{HTTP_USER_AGENT} ^Wget [OR] RewriteCond %{HTTP_USER_AGENT} ^Widow [OR] RewriteCond %{HTTP_USER_AGENT} ^WWWOFFLE [OR] RewriteCond %{HTTP_USER_AGENT} ^Xaldon\ WebSpider [OR] RewriteCond %{HTTP_USER_AGENT} ^Zeus RewriteRule ^.*$ http://www.google.com [R,L] # Protect against DOS attacks by limiting file upload size LimitRequestBody 10240000 # Deny access to sensitive files <FilesMatch "\.(htaccess|psd|log)$"> Order Allow,Deny Deny from all </FilesMatch>

  Read the article

• How do you exclude yourself from Google Analytics on your website using cookies?

  - by Cold Hawaiian

  I'm trying to set up an exclusion filter with a browser cookie, so that my own visits to my don't show up in my Google Analytics. I tried 3 different methods and none of them have worked so far. I would like help understanding what I am doing wrong and how I can fix this. Method 1 First, I tried following Google's instructions, http://www.google.com/support/analytics/bin/answer.py?hl=en&answer=55481, for excluding traffic by Cookie Content: Create a new page on your domain, containing the following code: <body onLoad="javascript:pageTracker._setVar('test_value');"> Method 2 Next, when that didn't work, I googled around and found this Google thread, http://www.google.com/support/forum/p/Google%20Analytics/thread?tid=4741f1499823fcd5&hl=en, where the most popular answer says to use a slightly different code: SHS Analytics wrote: <body onLoad="javascript:_gaq.push(['_setVar','test_value']);"> Thank you! This has now set a __utmv cookie containing "test_value", whereas the original: pageTracker._setVar('test_value') (which Google is still recommending) did not manage to do that for me (in Mac Safari 5 and Firefox 3.6.8). So I tried this code, but it didn't work for me. Method 3 Finally, I searched StackOverflow and came across this thread, http://stackoverflow.com/questions/3495270/exclude-my-traffic-from-google-analytics-using-cookie-with-subdomain, which suggests that the following code might work: <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setVar', 'exclude_me']); _gaq.push(['_setAccount', 'UA-xxxxxxxx-x']); _gaq.push(['_trackPageview']); // etc... </script> This script appeared in the head element in the example, instead of in the onload event of the body like in the previous 2 examples. So I tried this too, but still had no luck with trying to exclude myself from Google Analytics. Re-iterate question So, I tried all 3 methods above with no success. Am I doing something wrong? How can I exclude myself from my Google Analytics using an exclusion cookie for my browser? Update I've been testing this for several days now, and I've confirmed that the 2nd method of excluding yourself from tracking does indeed work. The problem was that the filter settings weren't properly applied to my profile, which has been corrected. See the accepted answer below.

  Read the article

• How to stop Apache from crashing my entire server?

  - by CyberShadow

  I maintain a Gentoo server with a few services, including Apache. It's fairly low-end (2GB of RAM and a low-end CPU with 2 cores). My problem is that, despite my best efforts, an over-loaded Apache crashes the entire server. In fact, at this point I'm close to being convinced that Linux is a horrible operating system that isn't worth anyone's time looking for stability under load. Things I tried: Adjusting oom_adj for the root Apache process (and thus all its children). That had close to no effect. When Apache was overloaded it would bring the system to a grind, as the system paged out everything else before it got to kill anything. Turning off swap. Didn't help, it would unload memory paged to binaries of processes and other files on /, thus causing the same effect. Putting it in a memory-limited cgroup (limited to 512 MB of RAM, 1/4th of the total). This "worked", at least in my own stress tests - except the server keeps crashing under load (basically stalling all other processes, inaccessible via SSH, etc.) Running it with idle I/O priority. This wasn't a very good idea in the end, because it just caused the system load to climb indefinitely (into the thousands) with almost no visible effect - until you tried to access an unbuffered part of the disk. This caused the task to freeze. (So much for good I/O scheduling, eh?) Limiting the number of concurrent connections to Apache. Setting the number too low caused web sites to become unresponsive due to most slots being occupied with long requests (file downloads). I tried various Apache MPMs without much success (prefork, event, itk). Switching from prefork/event+php-cgi+suphp to itk+mod_php. This improved performance, but didn't solve the actual problem. Switching I/O schedulers (cfq to deadline). Just to stress this out: I don't care if Apache itself goes down under load, I just want the rest of my system to remain stable. Of course, having Apache recover quickly after a brief period of intensive load would be great to have, but one step at a time. Right now I am mostly dumbfounded by how can humanity, in this day and age, design an operating system where such a seemingly simple task (don't allow one system component to crash the entire system) seems practically impossible - or at least, very hard to do. Please don't suggest things like VMs or "BUY MORE RAM". Some more information gathered with a friend's help: The processes hang when the cgroup oom killer is invoked. Here's the call trace: [<ffffffff8104b94b>] ? prepare_to_wait+0x70/0x7b [<ffffffff810a9c73>] mem_cgroup_handle_oom+0xdf/0x180 [<ffffffff810a9559>] ? memcg_oom_wake_function+0x0/0x6d [<ffffffff810aa041>] __mem_cgroup_try_charge+0x32d/0x478 [<ffffffff810aac67>] mem_cgroup_charge_common+0x48/0x73 [<ffffffff81081c98>] ? __lru_cache_add+0x60/0x62 [<ffffffff810aadc3>] mem_cgroup_newpage_charge+0x3b/0x4a [<ffffffff8108ec38>] handle_mm_fault+0x305/0x8cf [<ffffffff813c6276>] ? schedule+0x6ae/0x6fb [<ffffffff8101f568>] do_page_fault+0x214/0x22b [<ffffffff813c7e1f>] page_fault+0x1f/0x30 At this point, the apache memory cgroup is practically deadlocked, and burning CPU in syscalls (all with the above call trace). This seems like a problem in the cgroup implementation...

  Read the article

• "Error detecting shell" when launching Gnome Tweak Tool

  - by user70988

  It was working before I started the process of installing Gnome. I've poked around on Google but can't find anything. If I log into Gnome the screen is massively zoomed in and I have to pan around the page. I was hoping the appropriate setting would be in the tweak tool. __ WARNING : Error detecting shell Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell_extensions.py", line 149, in __init__ shell = GnomeShellFactory().get_shell() File "/usr/lib/python2.7/dist-packages/gtweak/utils.py", line 38, in getinstance instances[cls] = cls() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 143, in __init__ proxy = _ShellProxy() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 44, in __init__ result, output = self.proxy.Eval('(s)', js) File "/usr/lib/python2.7/dist-packages/gi/overrides/Gio.py", line 148, in __call__ kwargs.get('flags', 0), kwargs.get('timeout', -1), None) File "/usr/lib/python2.7/dist-packages/gi/types.py", line 43, in function return info.invoke(*args, **kwargs) GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files WARNING : Shell not running Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 59, in __init__ self._shell = GnomeShellFactory().get_shell() File "/usr/lib/python2.7/dist-packages/gtweak/utils.py", line 38, in getinstance instances[cls] = cls() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 143, in __init__ proxy = _ShellProxy() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 44, in __init__ result, output = self.proxy.Eval('(s)', js) File "/usr/lib/python2.7/dist-packages/gi/overrides/Gio.py", line 148, in __call__ kwargs.get('flags', 0), kwargs.get('timeout', -1), None) File "/usr/lib/python2.7/dist-packages/gi/types.py", line 43, in function return info.invoke(*args, **kwargs) GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files WARNING : Could not list shell extensions Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 64, in __init__ extensions = self._shell.list_extensions() AttributeError: ShellThemeTweak instance has no attribute '_shell' Traceback (most recent call last): File "/usr/bin/gnome-tweak-tool", line 76, in <module> MainWindow() File "/usr/lib/python2.7/dist-packages/gtweak/mainwindow.py", line 44, in __init__ model) File "/usr/lib/python2.7/dist-packages/gtweak/tweakview.py", line 40, in __init__ self._model.load_tweaks() File "/usr/lib/python2.7/dist-packages/gtweak/tweakmodel.py", line 135, in load_tweaks mods = __import__("gtweak.tweaks", globals(), locals(), tweak_files, 0) File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 236, in <module> GSettingsSwitchTweak("org.gnome.settings-daemon.plugins.power", "lid-close-suspend-with-external-monitor"), File "/usr/lib/python2.7/dist-packages/gtweak/widgets.py", line 116, in __init__ _GSettingsTweak.__init__(self, schema_name, key_name, **options) File "/usr/lib/python2.7/dist-packages/gtweak/widgets.py", line 105, in __init__ options.get("summary",self.settings.schema_get_summary(key_name)), File "/usr/lib/python2.7/dist-packages/gtweak/gsettings.py", line 122, in schema_get_summary return self._schema._schema[key]["summary"] KeyError: 'lid-close-suspend-with-external-monitor'

  Read the article

• Referencing a picture in another DLL in Silverlight and Windows Phone 7

  - by Laurent Bugnion

  This one has burned me a few times, so here is how it works for future reference: Usually, when I add an Image control into a Silverlight application, and the picture it shows is local (as opposed to loaded from the web), I set the picture’s Build Action to Content, and the Copy to Output Directory to Copy if Newer. What the compiler does then is to copy the picture to the bin\Debug folder, and then to pack it into the XAP file. In XAML, the syntax to refer to this local picture is: <Image Source="/Images/mypicture.jpg" Width="100" Height="100" /> And in C#: return new BitmapImage(new Uri( "/Images/mypicture.jpg", UriKind.Relative)); One of the features of Silverlight is to allow referencing content (pictures, resource dictionaries, sound files, movies etc…) located in a DLL directly. This is very handy because just by using the right syntax in the URI, you can do this in XAML directly, for example with: <Image Source="/MyApplication;component/Images/mypicture.jpg" Width="100" Height="100" /> In C#, this becomes: return new BitmapImage(new Uri( "/MyApplication;component/Images/mypicture.jpg", UriKind.Relative)); Side note: This kind of URI is called a pack URI and they have been around since the early days of WPF. There is a good tutorial about pack URIs on MSDN. Even though it refers to WPF, it also applies to Silverlight Side note 2: With the Build Action set to Content, you can rename the XAP file to ZIP, extract all the files, change the picture (but keep the same name), rezip the whole thing and rename again to XAP. This is not possible if the picture is embedded in an assembly! So what’s the catch? Well the catch is that this does not work if you set the Build Action to Content. It’s actually pretty simple to explain: The pack URI above tells the Silverlight runtime to look within an assembly named MyOtherAssembly for a file named MyPicture.jpg in the Images folder. If the file is included as Content, however, it is not in the assembly. Silverlight does not find it, and silently returns nothing. The image is not displayed. And the fix? The fix, for class libraries, is to set the Build Action to Resource. With this, the picture will gets packed into the DLL itself. Of course, this will increase the size of the DLL, and any change to the picture will require recompiling the class library, which is not ideal. But in the cases where you want to distribute pictures (icons etc) together with a plug-in assembly, well, this is a good way to have everything in the same place Happy coding, Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >