Search Results

Search found 23946 results on 958 pages for 'remote computer'.

Page 266/958 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

• Western Digital Caviar SE16 not recognized

  - by NStorm

  Before I start, I have been looking at quite a few websites and I still have not found an answer to my problem. I have been building my own computer recently and I have just received the hard drive (WD Caviar SE16 WD5000AAKS) I was planning to put in my computer. After connecting the SATA power cable (99.99999% sure it is connected correctly) and the SATA cable to my motherboard (ASUS M5A78L-M/USB3) I booted my computer into a Linux Mint 13 XFCE 64-bit live USB expecting to see a hard drive when I came to install. Sadly when I checked the only hard drive that was showing was /dev/sda which was my USB with the Linux files on it. I also checked gparted and no hard drive other than my USB was showing up there either. Lastly I checked my BIOS and no matter what SATA port I connected the HDD to it wouldn't show up there either. Does anyone have any advice? Some images of my set-up which could help are bellow: Thanks in advance, Nick

  Read the article

• One motherboard crashed. Changed and wants to crash again

  - by CoachNono

  My computer started to freeze randomly. I was pretty sure it was the hard drive that was starting to fail. Before I could change it, the motherboard was completely dead. I bought the same one and reinstall it. Everything went working well until my computer started to freeze again and doing the same problem has before. I don't want my motherboard to burn again and I'm really wondering what can be the problem... Could it be the power supply or the video cards that burned the motherboard ? I tested the voltages of the power supply and they seemed fine... The computer worked as is for four years... Here are the specs: ASUS P5N-D Motherboard LGA 775 NVIDIA 750i SLI Intel Q6600 2X EN9600GT 512mb 650w Corsair

  Read the article

• Weird internet connection issue on Ubuntu 14.04

  - by user287876

  I have an old Gateway PC with Windows 7 installed alongside the original (XP, I think?). A while ago my friend walked me through and helped me install Ubuntu 14.04 alongside the others because my Win7 was having issues with the display driver (it would unexpectedly crash while trying to watch videos on YouTube or other places). And I can't update it because the original computer settings are for XP or something, not Win7. :( We recently switched from AT&T U-Verse to Comcast. I would have stayed with Ethernet, but somehow the adapter I have wouldn't connect to Comcast's thing during their installation. So I was given a wireless USB adapter. It worked fine, up until the last few days. It's not a problem on Win7 (using it right now). Connection's strong, things load. On Ubuntu though, it SAYS it connects even before I login to my account, but when I login and bring up Firefox, it will load the homepage, and maybe one or two other pages I venture to before suddenly just... endlessly trying to load the page. I would normally go in and manually select 'disconnect' from the connections options menu to refresh/restart it like I've done a few times already. But lately, it won't respond, and then a little while later an error message comes up saying the request timed out/failed. Restarting my computer doesn't help it. The other weird thing is that I've noticed the signal (when it's actually working properly before the last few days) is comparitively weaker than when I'm on Win7. But my location doesn't change. It's the same computer, same connection.

  Read the article

• Does programmable hardware exist to allow hardware to be programmed by computers?

  - by agentbanks217

  I am a programmer and I have never really dealt with the hardware of anything, only software. I want to start building things that I can control from my computer using programming. My question is are there such devices on the market that have a programmable interface or API? For example, I want to build an automated window blinds opening/closing device, and I would like to be able to control it from my computer e.g. writing an app or some code to schedule them when to open and close. I would like to know if there are any devices that can be programmed to do that (the computer part)?

  Read the article

• Web RDP not working in Ubuntu 11.10

  - by user77321

  I am not able to connect to the remote machine from Ubuntu 11.10 machine using Web RDP. The following are the details. Java Vendor: Oracle Corporation Java Version: 1.7.0_07 IVE Host: xxx.xxx.com Run Level:0, read timeout:90000 Applet is signed and trusted webRDP version: 1.0.8.16, 2011-04-14 10:34 Attempting to obtain the license from the application jar. Obtained the license from the application jar. Keyboard: IBM101 I have removed the actual host name from the above details The error message on a pop up window is Application Error UnsatisfiedLinkError Unable to load library 'libX11':liblibX11.so: cannot open shared object file: No such file or directory. This error happens soon after Applet loads. I am supposed to get a WebRDP Screen with logo then a Windows Login screen for the remote machine. ( This is working fine in Linux Mint) Anyone has experienced this problem? Any solutions?

  Read the article

• iPhone can't access webserver on lan

  - by dieselJoe

  I have Apache serving on 192.168.1.4:8888 on a Windows 7 computer. I can't view the website with iPhone/iPad's Safari. I have another linux computer and it can access the webserver or ping the address. Is there a problem with the apple devices? I have an app on the iphone capable of pinging. I ping the webserver's address and I get nothing. But I can ping the iPhone from the linux or windows computer.

  Read the article

• List of freely available programming books

  - by Karan Bhangui

  I'm trying to amass a list of programming books with opensource licenses, like Creative Commons, GPL, etc. The books can be about a particular programming language or about computers in general. Hoping you guys could help: Languages BASH Advanced Bash-Scripting Guide (An in-depth exploration of the art of shell scripting) C The C book C++ Thinking in C++ C++ Annotations How to Think Like a Computer Scientist C# .NET Book Zero: What the C or C++ Programmer Needs to Know About C# and the .NET Framework Illustrated C# 2008 (Dead Link) Data Structures and Algorithms with Object-Oriented Design Patterns in C# Threading in C# Common Lisp Practical Common Lisp On Lisp Java Thinking in Java How to Think Like a Computer Scientist Java Thin-Client Programming JavaScript Eloquent JavaScript Haskell Real world Haskell Learn You a Haskell for Great Good! Objective-C The Objective-C Programming Language Perl Extreme Perl (license not specified - home page is saying "freely available") The Mason Book (Open Publication License) Practical mod_perl (CreativeCommons Attribution Share-Alike License) Higher-Order Perl Learning Perl the Hard Way PHP Practical PHP Programming Zend Framework: Survive the Deep End PowerShell Mastering PowerShell Prolog Building Expert Systems in Prolog Adventure in Prolog Prolog Programming A First Course Logic, Programming and Prolog (2ed) Introduction to Prolog for Mathematicians Learn Prolog Now! Natural Language Processing Techniques in Prolog Python Dive Into Python Dive Into Python 3 How to Think Like a Computer Scientist A Byte of Python Python for Fun Invent Your Own Computer Games With Python Ruby Why's (Poignant) Guide to Ruby Programming Ruby - The Pragmatic Programmer's Guide Mr. Neighborly's Humble Little Ruby Book SQL Practical PostgreSQL x86 assembly Paul Carter's tutorial Lua Programming In Lua (for v5 but still largely relevant) Algorithms and Data Structures Algorithms Data Structures and Algorithms with Object-Oriented Design Patterns in Java Planning Algorithms Frameworks/Projects The Django Book The Pylons Book Introduction to Design Patterns in C++ with Qt 4 (Open Publication License) Version control The SVN Book Mercurial: The Definitive Guide Pro Git UNIX / Linux The Art of Unix Programming Linux Device Drivers, Third Edition Others Structure and Interpretation of Computer Programs The Little Book of Semaphores Mathematical Logic - an Introduction An Introduction to the Theory of Computation Developers Developers Developers Developers Linkers and loaders Beej's Guide to Network Programming Maven: The Definitive Guide I will expand on this list as I get comments or when I think of more :D Related: Programming texts and reference material for my Kindle What are some good free programming books? Can anyone recommend a free software engineering book? Edit: Oh I didn't notice the community wiki feature. Feel free to edit your suggestions right in!

  Read the article

• Java - Error Message Help

  - by Brian

  In the Code, mem is a of Class Memory and getMDR and getMAR ruturn ints. When I try to compile the code I get the following errors.....how can I fix this? Computer.java:25: write(int,int) in Memory cannot be applied to (int) Input.getInt(mem.write(cpu.getMDR())); ^ Computer.java:28: write(int,int) in Memory cannot be applied to (int) mem.write(cpu.getMAR()); Here is the code for Computer: class Computer{ private Cpu cpu; private Input in; private OutPut out; private Memory mem; public Computer() { Memory mem = new Memory(100); Input in = new Input(); OutPut out = new OutPut(); Cpu cpu = new Cpu(); System.out.println(in.getInt()); } public void run() { cpu.reset(); cpu.setMDR(mem.read(cpu.getMAR())); cpu.fetch2(); while (!cpu.stop()) { cpu.decode(); if (cpu.OutFlag()) OutPut.display(mem.read(cpu.getMAR())); if (cpu.InFlag()) Input.getInt(mem.write(cpu.getMDR())); if (cpu.StoreFlag()) { mem.write(cpu.getMAR()); cpu.getMDR(); } else { cpu.setMDR(mem.read(cpu.getMAR())); cpu.execute(); cpu.fetch(); cpu.setMDR(mem.read(cpu.getMAR())); cpu.fetch2(); } } } Here is the code for Memory: class Memory{ private MemEl[] memArray; private int size; public Memory(int s) {size = s; memArray = new MemEl[s]; for(int i = 0; i < s; i++) memArray[i] = new MemEl(); } public void write (int loc, int val) {if (loc >=0 && loc < size) memArray[loc].write(val); else System.out.println("Index Not in Domain"); } public int read (int loc) {return memArray[loc].read(); } public void dump() { for(int i = 0; i < size; i++) if(i%1 == 0) System.out.println(memArray[i].read()); else System.out.print(memArray[i].read()); } } Here is the code for getMAR and getMDR: public int getMAR() { return ir.getOpcode(); } public int getMDR() { return mdr.read(); }

  Read the article

• SSTP client disconnects shortly after successfully connected to VPN

  - by Eran Betzalel

  I'm successfully authenticating and connecting to a SSTP VPN (on windows 2008) from my windows 7 machine, but for some reason, the connection is disconnected about a 1-2 seconds after it's established. I've done the following: Defined a SSTP VPN on my windows server 2008. Defined the same machine as CA. Issued the needed certificates and published them on the client. I'm currently testing this VPN inside my LAN so all the needed ports are opened. Here are the event log entries when trying to connect: Error Log (Client): The user HOME\User dialed a connection named Home VPN which has terminated. The reason code returned on termination is 829. Error Log (Server-VPN): The user HOME\User connected on port VPN0-0 on 7/27/2012 at 1:57 AM and disconnected on 7/27/2012 at 1:57 AM. The user was active for 0 minutes 0 seconds. 312 bytes were sent and 4528 bytes were received. The reason for disconnecting was user request. What would be the issue? How can I resolve or debug it? UPDATE: I've found an event log (Log=System, Source=RasSstp) message on the windows 7 machine that tries to connect to the VPN: The SSTP-based VPN connection to the remote access server was terminated because of a security check failure. Security settings on the remote access server do not match settings on this computer. Contact the system administrator of the remote access server and relay the following information: SHA1 Certificate Hash: 065D681...520375552F SHA256 Certificate Hash: 18DED363...EEEE28CFD00

  Read the article

• Telling subversion client to ignore certificate errors

  - by Pekka

  I have set up a copy of Redmine through the Bitnami Redmine Stack and am having trouble accessing a remote SVN repository through https. The trouble seems to be related to the fact that I don't have a signed certificate, and the certificate provided doesn't match the host name (I am accessing the same server through a number of host names). I am new to Ruby, Mongrel, Rails and Redmine. Following the advice in this forum thread, I changed the path Redmine uses to invoke the svn client in \apps\redmine\lib\ redmine\scm\adapters\subversion_adapter.rb from SVN_BIN = "svn" to SVN_BIN = "svn --trust-server-cert --non-interactive --config-dir c:/user/temp" I was hoping that the --trust-server-cert option would fix the certificate problem. However, I am still getting the following error message in mongrel.log: svn: OPTIONS of 'https://server.xyz:8443/svn/reponame': Server certificate verification failed: certificate issued for a different hostname, issuer is not trusted (https://server.xyz:8443) Does anybody know what to do about this? Additional info: I re-started the mongrel service after each change I am sure the configuration change has taken effect because subversion has created a full configuration directory in c:\user\temp I can access the remote repository using command line svn no problem The remote repository runs on a Windows box with VisualSVN

  Read the article

• How can I solve http_port 3129 intercept with squid?

  - by wmoreno3

  My system: uname -a FreeBSD server.local.jmorenov.com.co 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012 [email protected]:/usr/obj/usr/src/sys/GENERIC amd64 pkg info | grep squid squid-3.2.7 HTTP Caching Proxy I have this configuration in squid.conf: http_port 3128 accel vhost allow-direct # OK http_port 3129 intercept # Does not work icp_port 0 When I tried with: http_port 3129 intercept By switch line on ipnat.rules. In access log appears: 2013/01/09 00:46:03 kid1| IPF (IPFilter) NAT open failed: (13) Permission denied 2013/01/09 00:46:03 kid1| BUG #3329: Orphan Comm::Connection: local=127.0.0.1:3129 remote=192.168.1.129:51595 FD 24 flags=33 2013/01/09 00:46:03 kid1| NOTE: 1 Orphans since last started. /var/log/squid/cache.log 2013/02/08 09:02:33 kid1| Squid plugin modules loaded: 0 2013/02/08 09:02:33 kid1| Accepting reverse-proxy HTTP Socket connections at local=127.0.0.1:3128 remote=[::] FD 33 flags=9 2013/02/08 09:02:33 kid1| Accepting NAT intercepted HTTP Socket connections at local=127.0.0.1:3129 remote=[::] FD 34 flags=41 My /etc/ipnat.rules: root@server:/root # cat /etc/ipnat.rules # em0 = External NIC # bge0 = Internal NIC map em0 0/0 -> 0/32 proxy port ftp ftp/tcp map em0 0/0 -> 0/32 portmap tcp/udp auto map em0 0/0 -> 0/32 # Redirect direct web traffic to local web server. rdr em0 192.168.0.3/32 port 80 -> 127.0.0.1 port 80 tcp rdr bge0 192.168.1.3/32 port 80 -> 127.0.0.1 port 80 tcp # Redirect everything else to squid on port 3128 or 3129 intercept rdr em0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3128 tcp rdr bge0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3128 tcp #rdr em0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3129 tcp #rdr bge0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3129 tcp With 3128 is OK, but with 3129, Does not work, when switch in ipnat.rules.

  Read the article

• Windows XP - Security Update for Windows XP (KB923561) (KB946648) (KB956572) (KB958644)

  - by leeand00

  My father's computer has Windows XP, but when I try to install the service packs it always fails. What gives? Here are the errors that I get in the event log: Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Category: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB946648). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 38 33 44 31 41 44 ={83D1AD 0028: 46 35 2d 37 37 39 44 2d F5-779D- 0030: 34 30 31 36 2d 38 43 33 4016-8C3 0038: 31 2d 35 34 39 32 37 30 1-549270 0040: 46 36 37 42 33 46 7d 20 F67B3F} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 34 20 00 04 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Catagory: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB956572). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 44 46 32 46 30 41 ={DF2F0A 0028: 39 38 2d 36 45 33 35 2d 98-6E35- 0030: 34 33 37 39 2d 41 42 33 4379-AB3 0038: 33 2d 41 30 33 30 33 45 3-A0303E 0040: 46 37 34 42 32 41 7d 20 F74B2A} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 32 20 00 02 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer EVO Source: Windows Update Agent Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB958644). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 39 33 39 37 41 32 ={9397A2 0028: 31 46 2d 32 34 36 43 2d 1F-246C- 0030: 34 35 33 42 2d 41 43 30 453B-AC0 0038: 35 2d 36 35 42 46 34 46 5-65BF4F 0040: 43 36 42 36 38 42 7d 20 C6B68B} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 31 20 00 01 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Category: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB923561). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 33 31 30 41 34 43 ={310A4C 0028: 30 38 2d 35 39 33 44 2d 08-593D- 0030: 34 31 41 33 2d 42 42 35 41A3-BB5 0038: 37 2d 38 33 42 33 38 36 7-83B386 0040: 44 37 37 33 42 35 7d 20 D773B5} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 33 20 00 03 . Thank you, Andrew

  Read the article

• configure a Cisco ASA to use MS-CHAP v2 for RADIUS authentication

  - by DrStalker

  Cisco ASA5505 8.2(2) Windows 2003 AD server We want to configure our ASA (10.1.1.1) to authenticate remote VPN users through RADIUS on the Windows AD controller (10.1.1.200) We have the following entry on the ASA: aaa-server SYSCON-RADIUS protocol radius aaa-server SYSCON-RADIUS (inside) host 10.1.1.200 key ***** radius-common-pw ***** When I test a login using the account COMPANY\username I see the users credentials are correct in the security log, but I get the following in the windows system logs: User COMPANY\myusername was denied access. Fully-Qualified-User-Name = company.com/CorpUsers/AU/My Name NAS-IP-Address = 10.1.1.1 NAS-Identifier = <not present> Called-Station-Identifier = <not present> Calling-Station-Identifier = <not present> Client-Friendly-Name = ASA5510 Client-IP-Address = 10.1.1.1 NAS-Port-Type = Virtual NAS-Port = 7 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = <undetermined> Policy-Name = VPN Authentication Authentication-Type = PAP EAP-Type = <undetermined> Reason-Code = 66 Reason = The user attempted to use an authentication method that is not enabled on the matching remote access policy. My assumption is that the ASA is using PAP authentication, instead of MS-CHAP v2; the credentials are confirmed, the proper Remote Access Policy is being used, but this policy is set to only allow MS-CHAP2. What do we need to do on the ASA to make it us MS-CHAP v2? In the ADSM GUI The "Microsoft CHAP v2 compatible" tickbox is enabled, but I don't know what this corresponds to in the config.

  Read the article

• powershell v2 remoting - How do you enable unecrypted traffic

  - by Peter Walke

  I'm writing a powershell v2 script that I'd like to run against a remote server. When I run it, I get the error : Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Unencrypted traffic is currently disabled in the client configuration. Change the client configurati on and try the request again. For more information, see the about_ Remote_Troubleshooting Help topic. I looked at the online help for about _ Remote_Troubleshooting, but it didn't point me towards how to enable unecrypted traffic. Below is the script that I'm using that is causing me problems. Note: I have already run Enable-PSRemoting on the remote machine to allow it to accept incoming requests. I have tried to use a session option variable, but it doesn't seem to make any difference. $key = "HKLM:\SOFTWARE\Microsoft\PowerShell\1\ShellIds" Set-ItemProperty $key ConsolePrompting True $tvar = "password" $password = ConvertTo-SecureString -string $tvar -asPlainText –force $username="domain\username" $mySessionOption = New-PSSessionOption -NoEncryption $credential = New-Object System.Management.Automation.PSCredential($username,$password) invoke-command -filepath C:\scripts\RemoteScript.ps1 -sessionoption $mySessionOption -authentication digest -credential $credential -computername RemoteServer How do I enable unencrypted traffic?

  Read the article

• Having trouble using psservice and sc.exe between Windows Server 2008 machines

  - by Teflon Mac

  I'm trying to control services on one W2k8 machine from another; no domain just a workgroup. The user account I'm logged in as is an administrator on both machines. I've tried both psservice and sc.exe. These work in a Windows Server 2003 environment but it looks like I need to an extra step or two due to the changed security model in 2008. Any ideas as to how grant permission to the Service Control Manager (psservice) or OpenService (sc)? I tried running the DOS window with "Run As Administrator" and it made no difference. With psservice I get the following D:\mydir>psservice \\REMOTESERVER -u "adminid" -p "adminpassword" start "Display Name of Service" PsService v2.22 - Service information and configuration utility Copyright (C) 2001-2008 Mark Russinovich Sysinternals - www.sysinternals.com Unable to access Service Control Manager on \\REMOTESERVER: Access is denied. In the remote server, I get the following message in the Security Log so I know I connect and login to the remote machine. I assume it then fails on a subsequent authorization step. The logoff message in the security log is just that ("An account was logged off."), so no extra info there. Special privileges assigned to new logon. Subject: Security ID: REMOTESERVER\adminid Account Name: adminid Account Domain: REMOTESERVER Logon ID: 0xxxxxxxx Privileges: SeSecurityPrivilege SeBackupPrivilege SeRestorePrivilege SeTakeOwnershipPrivilege SeDebugPrivilege SeSystemEnvironmentPrivilege SeLoadDriverPrivilege SeImpersonatePrivilege sc.exe is similar. The command syntax and error differs as below but I also see the same login message in the remote server's security log. D:\mydir>sc \\REMOTESERVER start "Registry Name of Service" [SC] StartService: OpenService FAILED 5: Access is denied.

  Read the article

• Can't get my OpenVpn client to connect

  - by Larry

  Hi Guys, I am trying to setup a test vpn between my home desktop and my laptop. So far I have got the server on the desktop to connect fine but I can not get my laptop to finish the connection. I have tried several different configurations and they all give me the same result. Obviously it has nothing to do with my Client configuration but possibly something on my laptop? Here is the message I get in the log when it stops then times out and restarts. Mon Oct 18 20:10:55 2010 UDPv4 link local: [undef] Mon Oct 18 20:10:55 2010 UDPv4 link remote: 74.190.29.236:1194 Mon Oct 18 20:11:55 2010 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) Mon Oct 18 20:11:55 2010 TLS Error: TLS handshake failed here are my configurations server.ovpn port 1194 proto udp dev tun ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.1 255.255.255.252 ifconfig-pool-persist ipp.txt push "route 10.0.0.1 255.255.255.0" push "dhcp-option WINS 10.0.0.5" push "dhcp-option DNS 10.0.0.5" push "dhcp-option DOMAIN acme.com.local" keepalive 10 120 comp-lzo max-clients 1 persist-key persist-tun status openvpn-status.log verb 3 LArry.ovpn client proto udp dev tun remote doublel.hopto.org 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client1.crt key client1.key comp-lzo verb 3 dev tun local 206.162.148.9 remote 134.28.54.2 ifconfig 192.168.99.1 192.168.99.2 route 10.0.0.0 255.0.0.0 192.168.99.2 I just need a simple vpn for one user. Am I headed down the right path? Thanks, Larry

  Read the article

• Redmine subversion won't ignore certificate error even if told

  - by Pekka

  I have set up a copy of Redmine through the Bitnami Redmine Stack and am having trouble accessing a remote SVN repository through https. The trouble seems to be related to the fact that I don't have a signed certificate, and the certificate provided doesn't match the host name (I am accessing the same server through a number of host names). I am new to Ruby, Mongrel, Rails and Redmine. Following the advice in this forum thread, I changed the path Redmine uses to invoke the svn client in \apps\redmine\lib\ redmine\scm\adapters\subversion_adapter.rb from SVN_BIN = "svn" to SVN_BIN = "svn --trust-server-cert --non-interactive --config-dir c:/user/temp" I was hoping that the --trust-server-cert option would fix the certificate problem. However, I am still getting the following error message in mongrel.log: svn: OPTIONS of 'https://server.xyz:8443/svn/reponame': Server certificate verification failed: certificate issued for a different hostname, issuer is not trusted (https://server.xyz:8443) Does anybody know what to do about this? Additional info: I re-started the mongrel service after each change I am sure the configuration change has taken effect because subversion has created a full configuration directory in c:\user\temp I can access the remote repository using command line svn no problem The remote repository runs on a Windows box with VisualSVN

  Read the article

• File transfer problems through VPN when Cisco IPS is enabled

  - by Richard West

  We have a Cisco ASA 5510 firewall with the IPS module installed. We have a customer that we must connect to via VPN to their network to exchange files via FTP. We use the Cisco VPN client (version 5.0.01.0600) on our local workstations, which are behind the firewall and subject to the IPS. The VPN client is successful in connecting to the remote site. However when we start the FTP file transfer we are able to upload only 150K to 200K of data, then everything stops. A minute later the VPN session is dropped. I think I have isolated this to an IPS issue by temporarily disabling the Service Policy on the ASA for the IPS with the following command: access-list IPS line 1 extended permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 inactive After this command was issued I then established the VPN to the remote site and was successful in transferring the entire file. While still connected to the VPN and FTP session I issued the command to enable the IPS: access-list IPS line 1 extended permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 The file transfer was tried again and was once again successful so I closed the FTP session and reopened it, while keeping the same VPN session open. This file transfer was also successful. This told me that nothing with the FTP programs was being filtered or causing the problem. Furthermore, we use FTP to exchange files with many sites everyday without issue. I then disconnected the original VPN session, which was established when the access-list was inactive, and reconnected the VPN session, now with the access-list active. After starting the FTP transfer the file stopped after 150K. To me this seems like the IPS is blocking, or somehow interfering with the initial VPN setup to the remote site. This only started happening last week after the latest IPS signature updates were applied (sig version 407.0). Our previous sig version was 95 days old becuase the system was not auto updating itself. Any ideas on what could be causing this problem?

  Read the article

• Is it possible to play multiple audio streams from one "jukebox" to multiple Airport Express devices?

  - by Alex Reynolds

  I have set up a Mac mini as a jukebox that streams audio to an Airport Express in another room in the house, using the AirPlay/AirTunes feature in iTunes. I control this with the iOS Remote app, and this works great. At the present time, it looks like the Mac mini's copy of iTunes gets taken over by the Remote app, while streaming. If I set up a second Airport Express in room B, is there a way to set it up (as well as the jukebox) so that it can receive and play its own unique music stream ("stream B"), separate from what's going on at the Mac mini, or in room A, which is playing stream A? To accomplish this, I would be happy to buy a copy of Rogue Amoeba's AirFoil if it will allow sending multiple, separate audio streams from one computer to the multiple wireless bridges, while using the Remote app (or a Rogue Amoeba equivalent for iOS). However, it is unclear to me from their site documentation, whether that is possible or not. I'd prefer to give the points to an answer that solves this problem. If you don't know if it can be done, or do not think it can be done, please allow others to answer. I appreciate your help. Thanks for your advice.

  Read the article

• 'pskill \\hostname winlogon' might budge a server "stuck rebooting", but why?

  - by Snoi

  Question: Executing remote (Sysinternals) command... pskill \\machine winlogon ...can budge a server that is stuck rebooting, but how/why does this work? How do you know which service to kill? To recreate (e.g.): You run Windows Update, allow a reboot, and ...NOTHING! RDP gets cut off but the server does not reboot. Just about every other service seems to stay up. Further Background: I've faced this problem on VMs hosted around the planet for some years, and used various sc.exe and shutdown commands to learn the state of and attempt remote reboot of servers in such a state, with limited success. Most datacentres don't offer any way to see the true console or power off/on such machines. They charge $$ for you to call them to do such simple things after hours, when you nearly always have to run your maint tasks. e.g. NET USE \\machine\IPC$ /USER:login password sc \\machine query RpcSs sc \\machine query TermService sc \\machine query wuauserv tasklist /s machine This occasionally works for me... shutdown /m \\machine /r /f /t: 0 ...but more often than not it fails with: A system shutdown is in progress (1115). I found this question, and the answer by @Tweek, and it worked really well, but was I just lucky? Can not RDP to Win 2003 box or initiate remote restart @Tweek said to run: pskill \\hostname winlogon ...and that got me past this situation in a new way (Server 2008 R2 in my most recent case) - really useful! I just need to understand if I got lucky or there is more science here. What I'd like to know is why the winlogon process? @Livne said to use "tasklist /s HostName" to see what is the culprit, but how do you tell from the listed output? It's just a list of running tasks etc. From that I would not know what to look for, nor could I see anything about the winlogon process that suggested to my eyes that was the one to kill.

  Read the article

• MaxStartups and MaxSessions configurations parameter for ssh connections?

  - by Webby

  I am copying the files from machineB and machineC into machineA as I am running my below shell script on machineA. If the files is not there in machineB then it should be there in machineC for sure so I will try copying the files from machineB first, if it is not there in machineB then I will try copying the same files from machineC. I am copying the files in parallel using GNU Parallel library and it is working fine. Currently I am copying 10 files in parallel. Below is my shell script which I have - #!/bin/bash export PRIMARY=/test01/primary export SECONDARY=/test02/secondary readonly FILERS_LOCATION=(machineB machineC) export FILERS_LOCATION_1=${FILERS_LOCATION[0]} export FILERS_LOCATION_2=${FILERS_LOCATION[1]} PRIMARY_PARTITION=(550 274 2 546 278) # this will have more file numbers SECONDARY_PARTITION=(1643 1103 1372 1096 1369 1568) # this will have more file numbers export dir3=/testing/snapshot/20140103 find "$PRIMARY" -mindepth 1 -delete find "$SECONDARY" -mindepth 1 -delete do_Copy() { el=$1 PRIMSEC=$2 scp david@$FILERS_LOCATION_1:$dir3/new_weekly_2014_"$el"_200003_5.data $PRIMSEC/. || scp david@$FILERS_LOCATION_2:$dir3/new_weekly_2014_"$el"_200003_5.data $PRIMSEC/. } export -f do_Copy parallel --retries 10 -j 10 do_Copy {} $PRIMARY ::: "${PRIMARY_PARTITION[@]}" & parallel --retries 10 -j 10 do_Copy {} $SECONDARY ::: "${SECONDARY_PARTITION[@]}" & wait echo "All files copied." Problem Statement:- With the above script at some point I am getting this exception - ssh_exchange_identification: Connection closed by remote host ssh_exchange_identification: Connection closed by remote host ssh_exchange_identification: Connection closed by remote host And I guess the error is typically caused by too many ssh/scp starting at the same time. That leads me to believe /etc/ssh/sshd_config:MaxStartups and MaxSessions is set too low. But my question is on which server it is pretty low? machineB and machineC or machineA? And on what machines I need to increase the number? On machineA this is what I can find - root@machineA:/home/david# grep MaxStartups /etc/ssh/sshd_config #MaxStartups 10:30:60 root@machineA:/home/david# grep MaxSessions /etc/ssh/sshd_config And on machineB and machineC this is what I can find - [root@machineB ~]$ grep MaxStartups /etc/ssh/sshd_config #MaxStartups 10 [root@machineB ~]$ grep MaxSessions /etc/ssh/sshd_config #MaxSessions 10

  Read the article

• Windows 2008 RemoteAPP client disconnects within a matter of minutes

  - by Jeroen Wilke

  I'm having an odd problem with Windows 2008 TS, and remote applications specifically. The situation is as follows: TS idle timeout is disabled via GPO TS terminating disconnected sessions after 1hr (via GPO) My users can log on to the Terminal server, and get a full desktop, OR via rdp files that give access to a few remote applications. When a user connects to a full desktop, everything is fine and dandy, they will remain logged on indefinately, and when they disconnect the session is terminated after an hour. however, when a user connects using a remote application link, the client seems to disconnect after only a few minutes of inactivity, when you click the window, the session reconnects. EventID's on TS server: 4779: This event is generated when a user disconnects from an existing Terminal Services session, or when a user switches away from an existing destop using Fast User Switching. 4778 : This event is generated when a user reconnects to an existing Terminal Services session, or when a user switches to an existing desktop using Fast User Switching users are connecting directly to 3389, not using a TS-gateway at the moment. This behavior is consistent on different clients that we have, Full desktop is fine, RemoteAPP constantly disconnects. The .rdp file used doesn't list any interesting parameters, aside from what application to launch, and where to find it. Can someone explain to me how there can be a difference in behaviour between full desktop, and remoteapp ? since essentially they use the exact same client ? Regards Jeroen

  Read the article

• How to remove strict RSA key checking in SSH and what's the problem here?

  - by setatakahashi

  I have a Linux server that whenever I connect it shows me the message that changed the SSH host key: $ ssh root@host1 @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! Someone could be eavesdropping on you right now (man-in-the-middle attack)! It is also possible that the RSA host key has just been changed. The fingerprint for the RSA key sent by the remote host is 93:a2:1b:1c:5f:3e:68:47:bf:79:56:52:f0:ec:03:6b. Please contact your system administrator. Add correct host key in /home/emerson/.ssh/known_hosts to get rid of this message. Offending key in /home/emerson/.ssh/known_hosts:377 RSA host key for host1 has changed and you have requested strict checking. Host key verification failed. It keeps me for a very few seconds logged in and then it closes the connection. host1:~/.ssh # Read from remote host host1: Connection reset by peer Connection to host1 closed. Does anyone know what's happening and what I could do to solve this problem?

  Read the article

• linked-server sql - access

  - by user22121

  Hi, I have a SQL server 2000 and an Access database mdb connected by Linked server on the other hand I have a program in c # that updates data in a SQL table (Users) based data base access. When running my program returns the following error message: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. Authentication failed. [OLE / DB provider returned message: Can not start the application. Missing information file of the working group or is opened exclusively by another user.] OLE DB error trace [OLE / DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize:: Initialize returned 0x80040E4D: Authentication failed.] . Both the program, the sql server and database access are on a remote server. On the local server the problem was solved by running the following: "sp_addlinkedsrvlogin 'ActSC', 'false', NULL, 'admin', NULL". Try on the remote server the next, without result: "sp_addlinkedsrvlogin 'ActSC', true, null, 'user', 'pass'". On the remote server and from the "Query Analyzer" sql update statements are working correctly. Can you think of what may be the problem? Thanks!

  Read the article

• Enabling WinRM by Group Policy

  - by SaintNick

  I'm having partial success enabling WinRM through Active Directory GPO's on our Server 2008 R2 environment. I've created a GPO that enables "Allow automatic configuration of listeners" and also enables all the necessary predefined WinRM Firewall rules. This GPO works fine for our webservers. Indeed, this is reflected by the "Server Manager Remote Management" nicely flipping to "enabled" in Server Manager Server Summary. However, the same GPO applied to both our Management servers, which are Domain Controllers, does not give the same result. I see the GPO settings being applied, including the listener as confirmed by C:\Windows\system32>winrm e winrm/config/listener Listener [Source="GPO"] Address = * Transport = HTTP Port = 5985 Hostname Enabled = true URLPrefix = wsman CertificateThumbprint ListeningOn = 10.32.40.210, 10.32.40.211, 10.32.40.212 But in Server Manager, Server Summary, Remote Management remains on "disabled" and indeed when trying to connect to one of these machines Server Manager gives an "Access Denied". Manually enabling WinRM locally via Server Manager "Configure Server Manager Remote Management" on either of these machines works fine. What can be the cause? Can it have something to do with theses machines being DC's and needing extra settings in the GPO? Nick Reid

  Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >