Search Results

Search found 23946 results on 958 pages for 'remote computer'.

Page 262/958 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

  • Route multiple subdomains on one external ip to multiple internal ips

    - by Abenil
    i have several subdomains(git.example.org, build.example.org, etc.), i have a router with an external ip and i have several virtual machines on a host computer with internal ips. Now i want to route git.example.org to internal ip 10.0.2.1 and build.example.org to internal ip 10.0.2.2. How can I do this? I setup in the Router that all traffic on port 80 is comming to my host computer with internal ip 10.0.2.3 and installed Squid on that computer. I added the following lines to the squid.conf file: cache_peer 10.0.2.1 parent 80 0 no-query originserver name=server_1 cache_peer_domain server_1 git.example.org cache_peer 10.0.2.2 parent 80 0 no-query originserver name=server_2 cache_peer_domain server_2 build.example.org But this is not working for me. :( Any help appreciated. Regards Nils Update: Here is the solution for Apache http://serverfault.com/a/273693

    Read the article

  • SSH from external network refused

    - by wulfsdad
    I've installed open-ssh-server on my home computer(running Lubuntu 12.04.1) in order to connect to it from school. This is how I've set up the sshd_config file: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for #Port 22 Port 2222 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH #LogLevel INFO LogLevel VERBOSE # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net Banner /etc/sshbanner.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes #specify which accounts can use SSH AllowUsers onlyme I've also configured my router's port forwarding table to include: LAN Ports: 2222-2222 Protocol: TCP LAN IP Address: "IP Address" displayed by viewing "connection information" from right-click menu of system tray Remote Ports[optional]: n/a Remote IP Address[optional]: n/a I've tried various other configurations as well, using primary and secondary dns, and also with specifying remote ports 2222-2222. I've also tried with TCP/UDP (actually two rules because my router requires separate rules for each protocol). With any router port forwarding configuration, I am able to log in with ssh -p 2222 -v localhost But, when I try to log in from school using ssh -p 2222 onlyme@IP_ADDRESS I get a "No route to host" message. Same thing when I use the "Broadcast Address" or "Default Route/Primary DNS". When I use the "subnet mask", ssh just hangs. However, when I use the "secondary DNS" I recieve a "Connection refused" message. :^( Someone please help me figure out how to make this work.

    Read the article

  • Windows undetectable after interrupted chkdsk

    - by Felthragar
    I have a computer that is running Windows XP. For some reason, the other day it wouldn't start giving me the following message: "ntoskrnl.exe is missing or corrupt" So I put the XP disc in the tray and fired up the repair console and ran the following: chkdsk /r It was on for about eight hours and it got to about 52% I believe. Then there was a power outage and the computer shut down (obviously). Today when I was booting it, it isn't even detecting there's an OS anymore. If I boot the computer with no cd in the tray it says: "Reboot and select a proper Boot device or Insert Boot Media in selected Boot device and press a key" If I run the repair console, or the xp installation program it isn't finding any OS installations. Any ideas on what to do next? Any help is appreciated. Thanks! Update: After turning boot-time diagnostics on, I got this message when booting without cd (instead of the previous one): "Couldn't open drive multi(0)disk(0)rdisk(0)partition(2)"

    Read the article

  • Installed ubuntu over windows vista..cant reinstall windows

    - by Marcuz J Hinojoz
    I recently used the "compress hard drive" option within windows. i got the horid "boot mngr is compressed" after the restart. i tried booting my system back to windows vista but it doesnt read the cd that came with my computer. i tried going into system recovery and going back to a previous date but it didnt work. i kept pressing f8 but nothing. i installed ubuntu(the ubuntu cd worked but windows didnt?) i installed ubuntu so i could atleast get in my computer, and i still wasnt able to install windows from there. my hard drive got reformatted to a ext4? and windows cant install because it doesnt read it? im not sure, but its very frustrating. my computer is a gateway gt5668e windows vista home premium with sp1. im a graphic designer and use programs such as photoshop and cinema 4d to do my projects..i have been at a unfortunate halt with my work and i am really bummed out and dont know what to do... any help?

    Read the article

  • X200 Tablet notebook won't start after BIOS Update

    - by THEn
    I have LENOVO X200 Tablet and I ran the BIOS Update and the computer won't start after the BIOS update. When I ran the BIOS update utility it ran everything fine and asked to restart the computer but it wont start screen is blank. I unplugged the power and took of the battery and put them back and still not starting. Now it has [Power On] indicator light on and screen is not starting. I tried pressing F1 button while trying to start the computer but it doesn't do react to anything. Please help how I can start my Tablet. The update utility is http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-70651 Does any body know if X200 have any kind of hardware switch to reset the BIOS or any thing? What would be the best way to fix my BIOS? Thank you.

    Read the article

  • Adding files and folders to a Root Folder (inode/directory)

    - by xBaldwin
    Ok so I'm fairly new to Ubuntu and wasn't even the one who put it one this computer(my friend did while I was storing it at his house because I was in the middle of transitioning between houses), but It's on here so I need to learn what I can so I can use it more effectively. My question at the moment is "Would it be safe to add files/folders to a folder (inode/directory) that requires Root access?" I continue to be informed by the system that the directory I am using is running low on space which I found odd seeing how I should have a lot more room on this computer. That's when I started looking at the directories and found that there are two with a bunch of un-used space on them. One says it has 46.9 GB of free space and the other has 24.9 GB of free space. Seems like a complete waste to not use that space and yet they both say they require Root access to add to them. I know that Root folders and files are normally all system folders and files. I also know that changing or deleting them can mess up the computer which right now I cant afford to do. I just don't know if it would mess anything up to add something to those folders. Thank you in advance to anyone who takes the time to reply and try to teach me about how all that works. I really do appreciate it and will do the same if by some crazy (completely unlikely) reason I have an answer to your question. :-)`

    Read the article

  • Install Ubuntu in UEFI mode (unable to boot from USB)

    - by Adele
    I recently bought a Dell Inspiron 15R SE with Windows 8 (64 bit) pre-installed (UEFI supported). I want to install Ubuntu in dual boot with Windows 8. I tried to follow all instruction here : https://help.ubuntu.com/community/UEFI And here : Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) So, I set Secure Boot to "off" into BIOS and I disable Fast Startup as described here : http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html I created a bootable USB key for Ubuntu (Ubuntu 13.10 64bits international Edition) with Unetbootin. The problem is I am unable to boot from the USB key. The computer tries to boot into infinite loop. I also tried to boot from USB with "Legacy Boot" option instead of UEFI. In this case, the computer says there are no bootable devices. Of course, I tried to boot from my USB key on an other computer having normal BIOS and it works perfectly. Have you ideas about what I need to do to be able to boot from USB ? Thanks in advance for your help, Adele

    Read the article

  • Allowing access to MPD from local network

    - by August Karlstrom
    I have successfully installed MPD (Music Player Daemon) on my desktop computer. Everything works fine when the client runs on the same machine as the server. Now I would like to access MPD from my laptop computer which is connected (wirelessly) to the local network. In order to allow access to MPD from any computer on the local network I have added this line to /etc/hosts.allow: mpd: .local and restarted MPD. Still I get the message "error: Connection refused" when I try to access MPD with MPC (Music Player Client) from my laptop. Any clues or troubleshooting hints?

    Read the article

  • Windows 7 x64 Hard Freezing (again)

    - by Lanissum
    Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

    Read the article

  • Blocked port 25 on Windows 7 64 bit

    - by Michal Gow
    Strange problem. I have 2 computers connected to Wifi router. One with Windows Vista & second with 2 operating systems: SUSe Linux and Windows 7 64bit on it. Computer with Vista can connect to SMTP server of my email provider (and any other) using port 25, and can connect to a mail server using telnet mail.server.com 25 if this port is open. Computer with dual operating system can (using Linux) do the same. The same computer, with the same hardware (Wifi card etc.), and using the same WiFi router, cannot however use Port 25 and cannot Telnet into any smtp server. So the problem is in Windows 7. I did uninstall all antivirus software and disabled the firewall. The problem is still here. Is there way how find out which software is blocking this port?

    Read the article

  • How do I prevent internet access to a group of computers on my network?

    - by Kevin Boyd
    Well I have the following setup... Computer A , B and C are networked.... Computer A is connected to the internet, computer B and C are not setup for internet access currently but I guess its possible with some kind of setting they would eventually be able to access the internet and this is what I would like to prevent. In summary only A should have internet access while A and B and C should still be on intranet. Is this kind of config possible?, what kind of software or setup or tools would I need to achive this?

    Read the article

  • ubuntu to ubuntu backup in internal network

    - by amirash
    hey, i got my development "home" server witch is ubuntu 10, i brought today a computer in order to make a backup to this computer (the development server does also to him self backups every day but im paranoaid so i want to have two backups just in case on diffrent computers) what is the best way to backup the system core of the development server (like norton ghost) & do a full & incrmnt backup of him to the new computer that ive brought? rsync? rdiff? scp? clonezilla?

    Read the article

  • Backing up a Linux VPS with RSync to Vista

    - by Frank
    I've been working to setup a Linux VPS to host a couple of Wordpress sites and eventually a Mercurial server. I've setup one site and things have gone well. However, before I start moving other things to the VPS, I need to setup a backup solution. My provider, Linode, suggest RSync (among a couple of other options) to do backups. I've seen a few posts on this site that suggests other backup solutions including going to the Amazon Cloud but that costs money and the VPS is all the money I want to spend on this for the time being. So, to help solve that I want to have my backup computer be my home desktop computer. Assuming I'm using RSync, is it possible to use my Vista based home computer to become the destination for the backup? And if it is possible, what type of command or connection would I need to configure on the vista machine? Any insight would be helpful. It's probably obvious, but I've never used RSync.

    Read the article

  • Network? or router? problem

    - by Robert H Mercer
    I have two computers networked through a Netgear WG914 router which is connected to an Ipstar satellite modem via the RG47 LAN connector. The main computer is running Windows 7 Pro 64bit and the secondary computer is running Windows 7 Home Edition 32bit. On occasion there is a loss of internet connection usually on the main computer, often followed by a loss on the secondary comuter. Not, however, always the case. Windows troubleshooter, naturally, is about as much use as a politician in government.......NONE. There appears to be no problem with the ISP bad as it is and often the connection will be remade without any help from me. The difference in the OS's is not of any relevance since I had this problem before I changed over to Windows 7. Not being a nerd when it comes to networking I wonder if anyone has any constructive suggestions.

    Read the article

  • How to prevent slow printer performance when AD is not available

    - by AKoran
    When I take a domain based computer (Windows XP) and plug it into a network that doesn't have access to the AD, the first time I select a local printer (printing directly to printer) on the current network it takes a good 20-30 seconds before I can select the printer. Doing a little investigating using wireshark I can see the computer is trying to hit AD for some reason and it just keeps timing out. I also tried the same experiment with just a plain workgroup computer and it was able to bring the printer up immediately. Does anyone know how to prevent the machine from trying to contact AD?

    Read the article

  • Install Windows XP/7 without a CD drive when the BIOS does not support booting from USB devices

    - by David Pearce
    I have a computer that has a dead CD drive in it and it seriously needs a new installation of Windows (XP is on it now, but Windows 7 does not sound that bad). At first I tried making a bootable USB drive, but it does not look like the BIOS supports booting directly from a USB drive. Is there some sort of boot loader that I can put onto the hard drive first and boot from the USB drive using that? If not, how else can I re-install Windows on the computer? Edit: The only bootable device the computer has it the network with PXE (although I have no idea how to do that) and it's three internal hard drives

    Read the article

  • DHCP and Reservations in windows server 2k3!!

    - by Fri13th
    Hello everybody! I have a problem with Configuring DHCP Reservations: in the client, ipconfig: Address Leases is: 192.168.188.20 http:/i160.photobucket.com/albums/t171/dungttvn/123.png then in the client computer: ipconfig /release but when i config the Reservations with the fix IP address is: 192.168.188.100 in the sever computer (throught vmnet1) and in the client computer: ipconfig /renew ... it's not work: the address lease is still 192.168.188.20 always! http:/i160.photobucket.com/albums/t171/dungttvn/456.png Someone help me! =.= Many Thanks!

    Read the article

  • How To Figure Out Your PC’s Host Name From the Command Prompt

    - by The Geek
    If you’re doing any work with networking, you probably need to know the name of your computer. Rather than diving into Control Panel, there’s a really simple way to do this from the command prompt. Note: If you haven’t already, be sure to read our complete guide to networking Windows 7 with XP and Vista. To see the hostname… all you have to do is type hostname at the command prompt. Go figure, eh? The same thing works in Linux or OS X, though you can see that most of the time the hostname is part of the prompt anyway. Note: you can also change the hostname by simply typing “hostname <newhostname>”. Of course, the easiest way to see your computer name in Windows is to just hit the Win+Break key combination, which will pop up the System pane from Control Panel.   If you want to change it instead, you can always change your computer name easily through Control Panel. Similar Articles Productive Geek Tips MySql: Give Root User Logon Permission From Any HostUse "Command Prompt Here" in Windows VistaKeyboard Ninja: Scrolling the Windows Command Prompt With Only the KeyboardVerify the Integrity of Windows Vista System FilesFind Path of Application Running on Solaris, Ubuntu, Suse or Redhat Linux TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

    Read the article

  • Processing Text and Binary (Blob, ArrayBuffer, ArrayBufferView) Payload in WebSocket - (TOTD #185)

    - by arungupta
    The WebSocket API defines different send(xxx) methods that can be used to send text and binary data. This Tip Of The Day (TOTD) will show how to send and receive text and binary data using WebSocket. TOTD #183 explains how to get started with a WebSocket endpoint using GlassFish 4. A simple endpoint from that blog looks like: @WebSocketEndpoint("/endpoint") public class MyEndpoint { public void receiveTextMessage(String message) { . . . } } A message with the first parameter of the type String is invoked when a text payload is received. The payload of the incoming WebSocket frame is mapped to this first parameter. An optional second parameter, Session, can be specified to map to the "other end" of this conversation. For example: public void receiveTextMessage(String message, Session session) {     . . . } The return type is void and that means no response is returned to the client that invoked this endpoint. A response may be returned to the client in two different ways. First, set the return type to the expected type, such as: public String receiveTextMessage(String message) { String response = . . . . . . return response; } In this case a text payload is returned back to the invoking endpoint. The second way to send a response back is to use the mapped session to send response using one of the sendXXX methods in Session, when and if needed. public void receiveTextMessage(String message, Session session) {     . . .     RemoteEndpoint remote = session.getRemote();     remote.sendString(...);     . . .     remote.sendString(...);    . . .    remote.sendString(...); } This shows how duplex and asynchronous communication between the two endpoints can be achieved. This can be used to define different message exchange patterns between the client and server. The WebSocket client can send the message as: websocket.send(myTextField.value); where myTextField is a text field in the web page. Binary payload in the incoming WebSocket frame can be received if ByteBuffer is used as the first parameter of the method signature. The endpoint method signature in that case would look like: public void receiveBinaryMessage(ByteBuffer message) {     . . . } From the client side, the binary data can be sent using Blob, ArrayBuffer, and ArrayBufferView. Blob is a just raw data and the actual interpretation is left to the application. ArrayBuffer and ArrayBufferView are defined in the TypedArray specification and are designed to send binary data using WebSocket. In short, ArrayBuffer is a fixed-length binary buffer with no format and no mechanism for accessing its contents. These buffers are manipulated using one of the views defined by one of the subclasses of ArrayBufferView listed below: Int8Array (signed 8-bit integer or char) Uint8Array (unsigned 8-bit integer or unsigned char) Int16Array (signed 16-bit integer or short) Uint16Array (unsigned 16-bit integer or unsigned short) Int32Array (signed 32-bit integer or int) Uint32Array (unsigned 16-bit integer or unsigned int) Float32Array (signed 32-bit float or float) Float64Array (signed 64-bit float or double) WebSocket can send binary data using ArrayBuffer with a view defined by a subclass of ArrayBufferView or a subclass of ArrayBufferView itself. The WebSocket client can send the message using Blob as: blob = new Blob([myField2.value]);websocket.send(blob); where myField2 is a text field in the web page. The WebSocket client can send the message using ArrayBuffer as: var buffer = new ArrayBuffer(10);var bytes = new Uint8Array(buffer);for (var i=0; i<bytes.length; i++) { bytes[i] = i;}websocket.send(buffer); A concrete implementation of receiving the binary message may look like: @WebSocketMessagepublic void echoBinary(ByteBuffer data, Session session) throws IOException {    System.out.println("echoBinary: " + data);    for (byte b : data.array()) {        System.out.print(b);    }    session.getRemote().sendBytes(data);} This method is just printing the binary data for verification but you may actually be storing it in a database or converting to an image or something more meaningful. Be aware of TYRUS-51 if you are trying to send binary data from server to client using method return type. Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) TOTD #183 - Getting Started with WebSocket in GlassFish TOTD #184 - Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark Subsequent blogs will discuss the following topics (not necessary in that order) ... Error handling Custom payloads using encoder/decoder Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

    Read the article

  • Setup IPv6 over IPv4 tunnel in VPN

    - by bfmeb
    Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B has a local ipv6 address and there are resources (each of them with a local ipv6 address) connected to Router B. After I am connected to VPN, I am able to use ssh to have access over A. Now I can use the ping6 command to ping the Router B or one of its connected resources. This works fine. The ping fails if I try to ping router B on my computer. Overview: My Computer -- VPN -- Server A(ipv4) -- Router B(ipv6) -- Ressource A(ipv6) On resource A runs for example a HTTP-Server. My question is: How can I access Resource A (for example with HTTP) on my to VPN connected computer? Is it possible? Should I setup a tunnel device? Sorry for this inexpertly explanation, but I am new to network stuff!

    Read the article

  • Testing a Virtualisation of a Debian Server (vmWare vSphere probably)

    - by xyza
    I'm soon getting access to a powerful root-server (quad-core, 16gb ram, 1gbit connection) where gameservers (like minecraft,counterstrike etc.) for different customers should be setup. My plan is to use programs such as vmWare vSphere to create some virtual machines for each customer. Inside such a virtual machine I'll setup the gameserver and maybe some kind of ftp server when its needed. Now that I'm kinda new to virtualisation of servers I want to test this local on my Desktop Computer. Is it possible to create a virtual machine of debian using vmWare Player on my Windows desktop computer and then install vmware vSphere in this VM to create multiple VM's inside that VM ? Or do I really need to install Debian on my desktop computer. (I want to use the time during installations etc. to work a bit at my windows installation) Some tips on virtualising debian servers are also appreciated :)

    Read the article

  • Processor upgrade on a laptop vs. Ram upgrade. Also does ram always matter?

    - by Evan
    I have a Dell Inspiron 14r (N4110) with an Intel Core i3 and 4gb of ram. It runs very smoothly, however gaming on this laptop is very limited. This is mostly because of integrated graphics but i have seen a computer with a Core i5, and very similar specs otherwise, run games that the N4110 cannot. This other computer has integrated graphics and 6gb of ram. I am wondering whether upgrading ram or upgrading the processor make the most difference in performance. Which setup would get better performance, an i5 with 4gb of ram or an i3 with 8 gb of ram? (Both with integrated graphics) Also, is there a certain point at which you have too much ram for the computer to ever possibly use? For instance is there really any difference in performance between 8 gb and 16 gb of ram?

    Read the article

  • Sharing accounts between multiple computers running Ubuntu Linux

    - by john
    My school has a computer lab full of machines running Red Hat Linux. They have it set up so that you can log into any computer in the lab, and it automatically loads your desktop, home directory, etc, which makes it so all computers in the lab look the same to you, regardless or which one you're using. I have two computer at home running Ubuntu Linux. Could I do this same thing with my computers at home? What's it called, and how do I find documentation on how to set it up? Thanks!

    Read the article

  • Why does my USB stick not show up in Windows Vista?

    - by Kjensen
    Just reinstalled a Lenovo laptop with Vista. Two separate USB sticks, that work fine on another computer, will not show up on this Vista computer. USB ports work fine for other stuff. USB sticks worked before I reinstalled the computer. After looking around, I tried going into Disk management, to see if they appear there - they don't. Is there some sort of service, that might be disabled, not allowing removable drives to mount? Or what else can be wrong?

    Read the article

  • Have Windows Automatically Login Without Entering Your Password

    - by deadlydog
    If you are like me and don't want to have to enter your password each time Windows loads, you can have Windows start up without prompting you to enter a user name or password.  The simple (and BAD) way to do this is to simply not have a password on your user account, but that’s a big security risk and will allow people to easily remote desktop into your computer. So, first set a password on your windows account if you don’t already have one.  Then select Run... from the start menu (or use Windows Key + R to open the Run window) and type control userpasswords2, which will open the user accounts application.   On the Users tab, clear the box for Users must enter a user name and password to use this computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use to automatically log into Windows.  That's it.    You may also want to make sure your screen saver is not set to prompt you for a password when it exits either. Now your computer is secure without getting in your way.

    Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >