Search Results

Search found 7204 results on 289 pages for 'almost dead'.

Page 267/289 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >

• How to infer the type of a derived class in base class?

  - by enzi

  I want to create a method that allows me to change arbitrary properties of classes that derive from my base class, the result should look like this: SetPropertyValue("size.height", 50); – where size is a property of my derived class and height is a property of size. I'm almost done with my implementation but there's one final obstacle that I want to solve before moving on, to describe this I will first have to explain my implementation a bit: Properties that can be modified are decorated with an attribute There's a method in my base class that searches for all derived classes and their decorated properties For each property I generate a "property modifier", a class that contains 2 delegates: one to set and one to get the value of the property. Property Modifiers are stored in a dictionary, with the name of the property as key In my base class, there is another dictionary that contains all property-modifier-dictionaries, with the Type of the respective class as key. What the SetPropertyValue method does is this: Get the correct property-modifier-dictionary, using the concrete type of the derived class (<- yet to solve) Get the property modifier of the property to change (e.g. of the property size) Use the get or set delegate to modify the property's value Some example code to clarify further: private static Dictionary<RuntimeTypeHandle, object> EditableTypes; //property-modifier-dictionary protected void SetPropertyValue<T>(EditablePropertyMap<T> map, string property, object value) { var property = map[property]; // get the property modifier property.Set((T)this, value); // use the set delegate (encapsulated in a method) } In the above code, T is the Type of the actual (derived) class. I need this type for the get/set delegates. The problem is how to get the EditablePropertyMap<T> when I don't know what T is. My current (ugly) solution is to pass the map in an overriden virtual method in the derived class: public override void SetPropertyValue(string property, object value) { base.SetPropertyValue((EditablePropertyMap<ExampleType>)EditableTypes[typeof(ExampleType)], property, value); } What this does is: get the correct dictionary containing the property modifiers of this class using the class's type, cast it to the appropiate type and pass it to the SetPropertyValue method. I want to get rid of the SetPropertyValue method in my derived class (since there are a lot of derived classes), but don't know yet how to accomplish that. I cannot just make a virtual GetEditablePropertyMap<T> method because I cannot infer a concrete type for T then. I also cannot acces my dictionary directly with a type and retrieve an EditablePropertyMap<T> from it because I cannot cast to it from object in the base class, since again I do not know T. I found some neat tricks to infere types (e.g. by adding a dummy T parameter), but cannot apply them to my specific problem. I'd highly appreciate any suggestions you may have for me.

  Read the article

• Are there any modern GUI toolkits which implement a heirarchical menu buffer zone?

  - by scomar

  In Bruce Tognazzini's quiz on Fitt's Law, the question discussing the bottleneck in the hierarchical menu (as used in almost every modern desktop UI), talks about his design for the original Mac: The bottleneck is the passage between the first-level menu and the second-level menu. Users first slide the mouse pointer down to the category menu item. Then, they must carefully slide the mouse directly across (horizontally) in order to move the pointer into the secondary menu. The engineer who originally designed hierarchicals apparently had his forearm mounted on a track so that he could move it perfectly in a horizontal direction without any vertical component. Most of us, however, have our forarms mounted on a pivot we like to call our elbow. That means that moving our hand describes an arc, rather than a straight line. Demanding that pivoted people move a mouse pointer along in a straight line horizontally is just wrong. We are naturally going to slip downward even as we try to slide sideways. When we are not allowed to slip downward, the menu we're after is going to slam shut just before we get there. The Windows folks tried to overcome the pivot problem with a hack: If they see the user move down into range of the next item on the primary menu, they don't instantly close the second-level menu. Instead, they leave it open for around a half second, so, if users are really quick, they can be inaccurate but still get into the second-level menu before it slams shut. Unfortunately, people's reactions to heightened chance of error is to slow down, rather than speed up, a well-established phenomenon. Therefore, few users will ever figure out that moving faster could solve their problem. Microsoft's solution is exactly wrong. When I specified the Mac hierarchical menu algorthm in the mid-'80s, I called for a buffer zone shaped like a <, so that users could make an increasingly-greater error as they neared the hierarchical without fear of jumping to an unwanted menu. As long as the user's pointer was moving a few pixels over for every one down, on average, the menu stayed open, no matter how slow they moved. (Cancelling was still really easy; just deliberately move up or down.) This just blew me away! Such a simple idea which would result in a huge improvement in usability. I'm sure I'm not the only one who regularly has the next level of a menu slam shut because I don't move the mouse pointer in a perfectly horizontal line. So my question is: Are there any modern UI toolkits which implement this brilliant idea of a < shaped buffer zone in hierarchical menus? And if not, why not?!

  Read the article

• jquery load a specific #Div content from multiple html files

  - by Vikram

  Hello friends I am trying to make a Content Slider for my site. I have multiple HTML files and the structure of these files is like this: <div id="title"><h2>Title of the Slide</h2></div> <div id="image"><a href="http://mylink.com"><img src="image.jpg" width="600" height="300" alt="image"</a></div> <div id="content">Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s.</div> I have been trying to use the following script get content (but no success): <?php function render($position="") { ob_start(); foreach(glob("/slides/*.html") as $fileName) { $fname = basename( $fileName ); $curArr = file($fname); $slides[$fname ]['title'] = $curArr[0]; $slides[$fname ]['image'] = $curArr[1]; $slides[$fname ]['content'] = $curArr[2]; foreach($slides as $key => $value){ ?> <div id="slide-title"> <?php echo $value['title'] ?> </div> <div id="slide-content"> <?php echo $value['image'] ?> </div> <div id="slide-image"> <?php echo $value['content'] ?> </div> <?php }} ?> <?php return ob_get_clean(); } But then I came to know about a jQuery function.... (again no success) jQuery.noConflict(); (function($){ $(document).ready(function () { $('#slide-title').load('slides/slide1.html #title'); $('#slide-content').load('slides/slide1.html #content'); $('#slide-image').load('slides/slide1.html #image'); }); })(jQuery); Now My questions are..... Am I using the right syntax. How do I get the content from multiple files using jQuery. Please Note : My knowledge on Programming is almost '0'. I have just started learning it.

  Read the article

• NSUrlconnection problem receiving data from some filehosts

  - by Tammo

  hello again, i am trying to develop an downloadmanager. i can now download files from almost anywhere on linkclick. in the - (BOOL)webView:(UIWebView*)webView shouldStartLoadWithRequest:(NSURLRequest*)request navigationType:(UIWebViewNavigationType)navigationType i check if the url is a url to a binaryfile like a zipfile. than i setup a nsurlconnection NSMutableURLRequest *urlRequest = [NSMutableURLRequest requestWithURL:url cachePolicy:NSURLRequestReloadIgnoringLocalCacheData timeoutInterval:20.0]; [urlRequest setValue:@"User-Agent" forHTTPHeaderField:@"Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en) AppleWebKit/418.9 (KHTML, like Gecko) Safari/419.3"]; NSURLConnection *mainConnection = [NSURLConnection connectionWithRequest:urlRequest delegate:self]; if (nil == mainConnection) { NSLog(@"Could not create the NSURLConnection object"); } (void)connection:(NSURLConnection )connection didReceiveResponse:(NSURLResponse)response { self.tabBarController.selectedIndex=1; [receivedData setLength:0]; percent = 0; localFilename = [[[url2 absoluteString] lastPathComponent] copy]; NSLog(localFilename); NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDirectory = [paths objectAtIndex:0] ; NSString *appFile = [documentsDirectory stringByAppendingPathComponent:localFilename]; [[NSFileManager defaultManager] createFileAtPath:appFile contents:nil attributes:nil]; [downloadname setHidden:NO]; [downloadname setText:localFilename]; expectedBytes = [response expectedContentLength]; exp = [response expectedContentLength]; NSLog(@"content-length: %lli Bytes", expectedBytes); file = [[NSFileHandle fileHandleForUpdatingAtPath:appFile] retain]; if (file) { [file seekToEndOfFile]; } } (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data { if (file) { [file seekToEndOfFile]; } [file writeData:data]; [receivedData appendData:data]; long long resourceLength = [receivedData length]; float res = [receivedData length]; percent = res/exp; [progress setHidden:NO]; [progress setProgress:percent]; NSLog(@"Remaining: %lli KB", (expectedBytes-resourceLength)/1024); [kbleft setHidden:NO]; [kbleft setText:[NSString stringWithFormat:@"%lli / %lli KB", expectedBytes/1024 ,(resourceLength)/1024]]; } in the connectiondidfinish loading i close the file. all working fine for nearly every hoster except hosters wich have a capture procedure before like filedude.com in the uiwebview i can surf to the downloadpage enter the captcha and get the downloadlink. when i click on it the file will be created in the documentsdir with the filename and the download starts but he dont get any data. every file has 0kb and the NSLog(@"content-length: %lli Bytes", expectedBytes); gives out something like 100-400 byte . can somebody help me solve this problem? kind regards

  Read the article

• Suggest an alternative way to organize/build a database solution.

  - by Hamish Grubijan

  We are using Visual Studio 2010, but this was first conceived with VS2003. I will forward the best suggestions to my team. The current setup almost makes me vomit. It is a C# solution with most projects containing .sql files. Because we support Microsoft, Oracle, and Sybase, and so home-brewed a pre-processor, much like C preprocessor, except that substitutions are performed by a home-brewed C# program without using yacc and tools like that. #ifdefs are used for conditional macro definitions, and yeah - macros are the way this is done. A macro can expand to another macro or two, but this should eventually terminate. Only macros have #ifdef in them - the rest of the SQL-like code just uses these macros. Now, the various configurations: Debug, MNDebug, MNRelease, Release, SQL_APPLY_ALL, SQL_APPLY_MSFT, SQL_APPLY_ORACLE, SQL_APPLY_SYBASE, SQL_BUILD_OUTPUT_ALL, SQL_COMPILE, as well as 2 more. Also: Any CPU, Mixed Platforms, Win32. What drives me nuts is having to configure it correctly as well as choosing the right one out of 12 x 3 = 36 configurations as well as having to substitute database name depending on the type of database: config, main, or gateway. I am thinking that configuration should be reduced to just Debug, Release, and SQL_APPLY. Also, using 0, 1, and 2 seems so 80s ... Finally, I think my intention to build or not to build 3 types of databases for 3 types of vendors should be configured with just a tic tac toe board like: XOX OOX XXX In this case it would mean build MSFT+CONFIG, all SYBASE, and all GATEWAY. Still, the overall thing which uses a text file and a pre-processor and many configurations seems incredibly clunky. It is year 2010 now and someone out there is bound to have a very clean and/or creative tool/solution. The only pro would be that the existing collection of macros has been well tested. Have you ever had to write SQL that would work for several vendors? How did you do it? SqlVars.txt (Every one of 30 users makes a copy of a template and modifies this to suit their needs): // This is the default parameters file and should not be changed. // You can overwrite any of these parameters by copying the appropriate // section to override into SqlVars.txt and providing your own information. //Build types are 0-Config, 1-Main, 2-Gateway BUILD_TYPE=1 REMOVE_COMMENTS=1 // Login information used when applying to a Microsoft SQL server database SQL_APPLY_MSFT_version=SQL2005 SQL_APPLY_MSFT_database=msftdb SQL_APPLY_MSFT_server=ABC SQL_APPLY_MSFT_user=msftusr SQL_APPLY_MSFT_password=msftpwd // Login information used when applying to an Oracle database SQL_APPLY_ORACLE_version=ORACLE10g SQL_APPLY_ORACLE_server=oradb SQL_APPLY_ORACLE_user=orausr SQL_APPLY_ORACLE_password=orapwd // Login information used when applying to a Sybase database SQL_APPLY_SYBASE_version=SYBASE125 SQL_APPLY_SYBASE_database=sybdb SQL_APPLY_SYBASE_server=sybdb SQL_APPLY_SYBASE_user=sybusr SQL_APPLY_SYBASE_password=sybpwd ... (THIS GOES ON)

  Read the article

• Repeating a object that only occurs couple of times and has different values with htmlagilitypack c#.

  - by dtd

  I have a problem I cant seem to solve here. Lets say I have some html like beneth here that I want to parse. All this html is within one list on the page. And the names repeat themself like in the example I wrote. <li class = "seperator"> a date </li> <li class = "lol"> some text </li> <li class = "lol"> some text </li> <li class = "lol"> some text </li> <li class = "seperator"> a new date </li> <li class = "lol"> some text </li> <li class = "seperator"> a nother new date </li> <li class = "lol"> some text </li> <li class = "lol"> some text </li> I did manage to use htmlagility pack to parse every li object seperate, and almost formating it how I want. My print atm looks something like this: "a date" "some text" "some text" "some text" "some text" "a new date" "some text" "a nother new date " "some text" "some text" "some text" What I want to achive: "a date" "some text" "a date" "some text" "a date" "some text" "a date" "some text" "a new date" "some text" "a nother new date " "some text" "a nother new date " "some text" "a nother new date " "some text" But the problem is that beneath every seperator, the count of every lol object may vary. So one day, the webpage may have one lol object beneth date 1, and the next day it may have 10 lol objects. So I am woundering if there is an smart/easy way to somehow count the number of lol objects in between the seperators. Or if there is another way to figure this out? Within for example htmlagilitypack. And yes, I need the correct date in front of every lol object, not just infront the first one. This would have been a pice of cake if the seperator class would have ended beneath the last lol object, but sadly that is not the case... I dont think that I need to paste my code here, but basicly what I do is to parse the page, extract the seperators and lol objects and add them to a list, where I split them up to seperator and lol objects. Then I print it out to a file and since the seperator only occure 3 times(in the example) I will only get out 3 seperate dates.

  Read the article

• sifr menu list problems, height of object calculated wrong

  - by armyofda12mnkeys

  I am using Drupal and have sifr set on list items, and also a, a:hover are set via Drupal so that the links hover. I looked at the sifr3-rules.js file drupal's render module creates and it looks good. and in fact my other sifr items look fine... But the list item ones are goofing for some reason... There is extra space below the list, so if i have a list item, and inside of that, I have a unordered list with more list items, the Flash Object made in the 1st li (which will cover the rest of the sublist items too), is too bid so you see space under the children until the next parent li comes up. (so looks like extra bottom padding on that portion of the list in IE8... in FF almost similar but each subitem has space at bottom... with javascript turned off, you see the list items look fine by themselves).... Also if the parent list item is shorter than the sub list items text, the width for the flash object is set only as long as the first list item, and therefore cuts off the rest the sublist item's text. Any idea how to resolve any of these? Only unusual thing i see i am doing is setting forceSingleLine and preventWrap (which dont make a difference if taken off). ****Edit, I may just try to figure out how to get Drupal's menu-block module to output a around my hyperlinks in the list items... then i can target the div's with my rule (and the a,a:hover rules will apply), so each menu item gets its own sifr object instead of sifr3 trying to figure out how to do the lists and sublists. Very useful to me is anyone knows a way to target a hyperlink (<a> tag) and also allow a:hover rules. I know how to do it with pretend another tag that includes hyperlinks, like if i had <h2><a>sometitle</a></h2>, i could have a rule for h2, but then use the a, a:hover rules in the sifr3-rules.js file to target that. so i would need a way to target the hyperlink in the list, but also apply a :hover to it (not sure if this can be done since its not underneith for example the h2 tag).

  Read the article

• Contact form with php-script does not work

  - by elajjas

  I'm new to the forum and I have been trying to find a thread that could be helpful but nothing have been working out so far. I recently uploaded my site via FTP, and it works fine. Except for one thing, my contact form. The contact form is crucial and it is almost the whole point of the website. I don't get any emails "from the form", either in my spam-folder or inbox. Please have a look at the website which is: http://www.adspot.se The contact form is situated on: http://www.adspot.se/contact.html The php script looks like this: <?php if (isset($_REQUEST['email'])) //if "email" is filled out, send email { //send email $name = $_REQUEST['name'] ; $email = $_REQUEST['email'] ; $message = $_REQUEST['message'] ; mail("[email protected]", $name, $message, "From:" . $email); } ?> I've already tried different types of php-scripts, but it still doesn't seem to work. UPDATE: Changed the form code to: <form method="POST" action="email.php"> <div class="row half"> <div class="6u"> <input name="name" placeholder="Name" type="text" class="text" /> </div> <div class="6u"> <input name="email" placeholder="Email" type="text" class="text" /> </div> </div> <div class="row half"> <div class="12u"> <textarea name="message" placeholder="Message"></textarea> </div> </div> <div class="row half"> <div class="12u"> <ul class="action"> <input type="submit" class="action"> </ul> </div> </div> </form> Now it redirects me to www.adspot.se/email.php but still no emails received...

  Read the article

• Defined variables and arrays vs functions in php

  - by Frank Presencia Fandos

  Introduction I have some sort of values that I might want to access several times each page is loaded. I can take two different approaches for accessing them but I'm not sure which one is 'better'. Three already implemented examples are several options for the Language, URI and displaying text that I describe here: Language Right now it is configured in this way: lang() is a function that returns different values depending on the argument. Example: lang("full") returns the current language, "English", while lang() returns the abbreviation of the current language, "en". There are many more options, like lang("select"), lang("selectact"), etc that return different things. The code is too long and irrelevant for the case so if anyone wants it just ask for it. Url The $Url array also returns different values depending on the request. The whole array is fully defined in the beginning of the page and used to get shorter but accurate links of the current page. Example: $Url['full'] would return "http://mypage.org/path/to/file.php?page=1" and $Url['file'] would return "file.php". It's useful for action="" within the forms and many other things. There are more values for $Url['folder'], $Url['file'], etc. Same thing about the code, if wanted, just request it. Text [You can skip this section] There's another array called $Text that is defined in the same way than $Url. The whole array is defined at the beginning, making a mysql call and defining all $Text[$i] for current page with a while loop. I'm not sure if this is more efficient than multiple calls for a single mysql cell. Example: $Text['54'] returns "This is just a test array!" which this could perfectly be implemented with a function like text(54). Question With the 3 examples you can see that I use different methods to do almost the same function (no pun intended), but I'm not sure which one should become the standard one for my code. I could create a function called url() and other called text() to output what I want. I think that working with functions in those cases is better, but I'm not sure why. So I'd really appreciate your opinions and advice. Should I mix arrays and functions in the way I described or should I just use funcions? Please, base your answer in this: The source needs to be readable and reusable by other developers Resource consumption (processing, time and memory). The shorter the code the better. The more you explain the reasons the better. Thank you PS, now I know the differences between $Url and $Uri.

  Read the article

• Adding a clustered index to a SQL table: what dangers exist for a live production system?

  - by MoSlo

  Right, keep in mind i need to describe this by abstracting all possible confidential info: I've been put in charge of a 10-year old transactional system of which the majority business logic is implemented at database level (triggers, stored procedures etc). Win2000 server, MSSQL 2000 Enterprise. No immediate plans for replacing/updating the system are being considered :( The core process is a program that executes transactions - specifically, it executes a stored procedure with various parameters, lets call it sp_ProcessTrans. The program executes the stored procedure at asynchronous intervals. By itself, things work fine. But there are 30 instances of this program on remotely located workstations, all of them asynchronously executing sp_ProcessTrans and then retrieving data from the SQL server (execution is pretty regular - ranging 0 to 60 times a minute, depending on what items the program instance is responsible for) . Performance of the system has dropped considerably with 10 yrs of data growth: the reason is the deadlocks and specifically deadlock wait times. The deadlock is on the Employee table. I have discovered: In sp_ProcessTrans' execution, it selects from an Employee table 7 times (dont ask) The select is done on a field that is NOT the primary key No index exists on this field. Thus a table scan is performed. 7 times. per transaction So the reason for deadlocks is clear. I created a non-unique ordered clustered index on the field (field looks good, almost unique, NUM(7), very rarely changes). Immediate improvement in the test environment. The problem is that i cannot simulate the deadlocks in a test environment (I'd need 30 workstations; i'd need to simulate 'realistic' activity on those stations, so visualization is out). I need to know if i must schedule downtime. Creating an index shouldn't be a risky operation for MSSQL, but is there any danger (data corruption in transactions/select statements/extra wait time etc) to create this field index on the production database while the transactions are still taking place? (although i can select a time when transactions are fairly quiet through the 30 stations) Are there any hidden dangers i'm not seeing (not looking forward to needing to restore the DB if something goes wrong, restoring would take a lot of time with 10yrs of data).

  Read the article

• WPF textbox derived control override drag&drop OnPreviewDrop (C sharp)

  - by Petr Klus

  Hi, I have been working on my custom control derived from the TextBox and I have encountered a problem I can not solve right now. Brief description of the problem: my textbox contains plain text which contains tags which I want to keep consistent - so far I have overriden text selection so they can be selected only as a whole tag etc. Right now I have moved to processing of drag&drop. If any text is dropped on the textfield and it is dropped on the tag, I want the insertion to be moved before or after the tag. The actual problem is with setting of the e.Handled=true. If I set it to true, it almost works - the text is inserted via my routine, but it is not removed from the source. If I set it to false, after executing my method the original textbox's insertion method is run. Is there any way to alter event routing? Or am I approaching this wrong from the start? Code of my method: protected override void OnPreviewDragEnter(DragEventArgs e) { base.OnPreviewDragEnter(e); e.Handled = true; // let us draw our very own caret... } protected override void OnPreviewDrop(DragEventArgs e) { base.OnPreviewDrop(e); fieldsReady = false; int selStart = this.SelectionStart; int selLength = this.SelectionLength; string droppedData = (string)e.Data.GetData(DataFormats.StringFormat); // where to insert Point whereDropped = e.GetPosition(this); int droppedIndex = GetCharacterIndexFromPoint(whereDropped, true); if (droppedIndex == this.Text.Length - 1) { double c = GetRectFromCharacterIndex(droppedIndex).X; if (whereDropped.X > c) droppedIndex++; } // only if the source was us, do this: if (this.SelectionLength > 0) // this means that we are dragging from our textbox! { // was there any selection? if so, remove it! this.Text = this.Text.Substring(0, selStart) + this.Text.Substring(selStart + selLength); e.Handled = true; // 2DO!! alter the indices depending on the removed selection // insertion this.Text = this.Text.Substring(0, droppedIndex) + droppedData + this.Text.Substring(droppedIndex); } }

  Read the article

• Why am I getting ClassNotFoundExpection when I have properly imported said class and am looking at it in its directory?

  - by Strider

  This is my Javac compiling statement: javac -cp "C:\java\code\j3D\j3dcore.jar;C:\java\code\j3D\j3dutils.jar;C:\java\code\j3D\vecmath.jar" Simple.java compiles with no problems. The three jar files (j3dcore, j3dutils, and vecmath) are the essential jar's for my program (or at least I am led to believe according to this official tutorial on J3D For the record I ripped this code almost line from line from this pdf file. jar files are correctly located in referenced locations When I run my Simple program, (java Simple) I am greeted with Exception in thread "main" java.lang.NoClassDefFoundError: javax/media/j3d/Cavas3d Caused by: java.lang.ClassNotFoundExpection: javax.media.j3d.Canvas3D Currently I am staring directly at this Canvas3D.class that is located within j3dcore.jar\javax\media\j3d\ wtfisthis.jpg Here is the source code: //First java3D Program import java.applet.Applet; import java.awt.BorderLayout; import java.awt.Frame; import java.awt.event.*; import com.sun.j3d.utils.applet.MainFrame; import com.sun.j3d.utils.universe.*; import com.sun.j3d.utils.geometry.ColorCube; import javax.media.j3d.*; import javax.vecmath.*; import java.awt.GraphicsConfiguration; public class Simple extends Applet { public Simple() { setLayout(new BorderLayout()); GraphicsConfiguration config = SimpleUniverse.getPreferredConfiguration(); Canvas3D canvas3D = new Canvas3D(config); add("Center", canvas3D); BranchGroup scene = createSceneGraph(); scene.compile(); // SimpleUniverse is a Convenience Utility class SimpleUniverse simpleU = new SimpleUniverse(canvas3D); // This moves the ViewPlatform back a bit so the // objects in the scene can be viewed. simpleU.getViewingPlatform().setNominalViewingTransform(); simpleU.addBranchGraph(scene); } // end of HelloJava3Da (constructor) public BranchGroup createSceneGraph() { // Create the root of the branch graph BranchGroup objRoot = new BranchGroup(); // Create a simple shape leaf node, add it to the scene graph. // ColorCube is a Convenience Utility class objRoot.addChild(new ColorCube(0.4)); return objRoot; } public static void main(String args[]){ Simple world = new Simple(); } }` Did I import correctly? Did I incorrectly reference my jar files in my Javac statement? If I clearly see Canvas3D within its correct directory why cant java find it? The first folder in both j3dcore.jar and vecmath.jar is "javax". Is the compiler getting confused? If the compiler is getting confused how do I specify where to find that exact class when referencing it within my source code?

  Read the article

• Form value field is visable in localhost but not on live site-how to hide?

  - by Joel

  Hi guys, I'm almost completed moving my first live site to my new xampp setup on localhost. I have a form that uses jquery in the header of the site. It's a bit verbose, but here it is: <div class="outeremailcontainer"> <div id="emailcontainer"> <?php include('verify.php'); ?> <form action="index_success.php" method="post" id="sendEmail" class="email"> <h3 class="register2">Newsletter Signup:</h3> <ul class="forms email"> <li class="name"><label for="yourName">Name: </label> <input type="text" name="yourName" class="info" id="yourName" value="<?= $_POST['yourName']; ?>" /><br /> </li> <li class="city"><label for="yourCity">City: </label> <input type="text" name="yourCity" class="info" id="yourCity" value="<?= $_POST['yourCity']; ?>" /><br /> </li> <li class="email"><label for="emailFrom">Email: </label> <input type="text" name="emailFrom" class="info" id="emailFrom" value="<?= $_POST['emailFrom']; ?>" /> <?php if(isset($emailFromError)) echo '<span class="error">'.$emailFromError.'</span>'; ?> </li> <li class="buttons email"> <button type="submit" id="submit">Send</button> <input type="hidden" name="submitted" id="submitted" value="true" /> </li> </ul> </form> <div class="clearing"> </div> </div> </div> So I am using jQuery (I can include the function if need-be) and it hides fields, etc. The problem is that on the localhost site, the values of the fields are populating the fields. IE: first field has this in the box, etc <?= $_POST['yourName']; ?> It works great in the live site though. Any idea how to fix this? Thanks!

  Read the article

• jquery animation problem using stop

  - by Flanders

  Hi! When running a Jquery animation like slideDown(), it looks like a number of element-specific css properties is set to be updated at a specific interval and when the animation is complete these properties are unset and the display property is simply set to auto or whatever. At least in firebug you can't see those temporary properties any more. The problem I've encountered is the scenario where we stop the slide down with stop(). The element is then left with the current temporary css values. Which is fine because it has to, but let us say that I stoped the slidedown because I have decided to slide it back up again a bit prematurely. It would look something like this: $(this).slideDown(2000) //The below events is not in queue but will rather start execute almost simultaneously as the above line. (dont remember the exact syntax) $(this).delay(1000).stop().slideUp(2000) The above code might not make much sense, but the point is: After 1 second of sliding down the animation is stopped and it starts to slide back up. Works like a charm. BUT!!! And here is the problem. Once it it has slid back up the elements css properties are reset to the exact values it had 1000ms into the slideDown() animation (when stop() was called). If we now try to run the following: $(this).slideDown(2000) It will slide down to the very point the prior slideDown was aborted and not further at half the speed (since it uses the same time for approximately half the height). This is because the css properties were saved as I see it. But it is not especially wished for. Of course I want it to slide all the way down this time. Due to UI interaction that is hard to predict everything might soon break. The longer animations we use increases the risk of something like this happening. Is this to be considered a bug, or am I doing something wrong? Or maybe it's just a feature that is not supported? I guess I can use a callback function to reset the css properties, but depending on the animation used, different css properties are used to render it, and covering your back would result in quite a not-so-fancy solution.

  Read the article

• IE dynamic image caching issue?

  - by rdevitt

  I have an html page that is loading multiple iframes into which are embedded dynamic images created from a Tomcat server page (.jsp). This works as expected from Chrome and Firefox, but for some reason IE displays all of the images the same (as the first image). I've created an example: http://coupondiscounts.com/dev/jsImageTest.html jsImageTest.html -- This page simply loads 6 instances of the testImageFrame.html page in separate iframes one-at-a-time, using Javascript. testImageFrame.html -- This is the page loaded in all the iframes. It contains only a JavaScript block that writes out the current time and an img tag. The img is dynamically generated by a .jsp page on a different server. It should be a white box on a black background. In the box are the current time (from the Tomcat server using Java) and a randomly created double between 0 & 1. What happens (in IE): The page almost instantly loads four identical iframes. Depending on the speed of your machine, the JavaScript times may vary by a second or two. The images' times will all be the same as will be the random number. This holds true even for the last two iframes which are loaded 5 and 10 seconds after the others (using JavaScript setTimeout()). What should happen (as it does in Chrome and FF): The page loads the same 4 iframes, but the random numbers in the images will be different. The times in the images occasionally span a second as well. Anyone have a clue as to what's going on here? Is IE doing some strange caching? The image header has "no-cache," "no-store" and all that. I've tried it on IE6 and 7. You can use the "Next" button to create another iframe. In IE, the images are always the same. Notes: I don't really need iframes, just the images, but if I only use img tags, the problem appears in Chrome and FF as well. I also don't really need to load these iframes dynamically, I was just trying to abstract the issue further and allow a delayed load for the latter 2 images.

  Read the article

• How to load an external swf to the main stage from an instanced child class?

  - by RaamEE

  Hi, I am trying to get an instance of a class to the load an external swf and show it. So far I have the following: 1) I wrote a class that uses the Loader class to load an external swf "loadExtSWF". 2) I have a fla named "MainSWF.fla" that uses a document class "MainSWF.as". 3) I have the MainSWF.as file that instances "loadExtSWF" and calls loadExtSWF.startLoad to load the swf. This almost works. The instance of loadExtSWF loads the external swf, but the swf is not displayed. If I replace the fla's document class with loadExtSWF (this has an empty constructor) instead of MainSWF, and run loadExtSWF.startLoad, then the external swf is loaded and displayed. It seems that the way I initially do it, loads the swf to the wrong stage (?). Any ideas? Thanks for the help. Bye, RaamEE P.S. If you replace the document class for test_tsscreen from test_tsscreen.as to TSScreen.as, and remove the comment inside the test_tsscreen's constructor, the swf will be loaded. my code is: file test_as3.swf an external as3 swf file. file test_tsscreen.fla the fla is empty and references test_tsscreen.as as its document class. file test_tsscreen.as package { import flash.display.MovieClip; import TSScreen; public class test_tsscreen extends MovieClip{ var tsScreen1; public function test_tsscreen(){ // var tsScreen1:TSScreen = new TSScreen(10,10,100,100,0.5,0); var tsScreen1:TSScreen = new TSScreen(); tsScreen1.startLoad(this.stage); } } } file TSScreen.as package { import flash.display.MovieClip; import flash.display.*; import flash.net.URLRequest; import flash.system.ApplicationDomain; import flash.system.LoaderContext; import flash.display.Loader; import flash.events.Event; import flash.events.ProgressEvent; public class TSScreen extends MovieClip implements ITSScreenable{ public function TSScreen():void{ // startLoad(this); //Look important comment in above text } function startLoad(_this:Stage) { var mLoader:Loader = new Loader(); var mRequest:URLRequest = new URLRequest("test_as3.swf"); mLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onCompleteHandler); mLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, onProgressHandler); _this.parent.addChild(mLoader); mLoader.load(mRequest); trace(this.name); trace(_this.name); } function onCompleteHandler(loadEvent:Event) { addChild(loadEvent.currentTarget.content); } function onProgressHandler(mProgress:ProgressEvent) { var percent:Number = mProgress.bytesLoaded/mProgress.bytesTotal; trace(percent); } } }

  Read the article

• Numpy/Python performing terribly vs. Matlab

  - by Nissl

  Novice programmer here. I'm writing a program that analyzes the relative spatial locations of points (cells). The program gets boundaries and cell type off an array with the x coordinate in column 1, y coordinate in column 2, and cell type in column 3. It then checks each cell for cell type and appropriate distance from the bounds. If it passes, it then calculates its distance from each other cell in the array and if the distance is within a specified analysis range it adds it to an output array at that distance. My cell marking program is in wxpython so I was hoping to develop this program in python as well and eventually stick it into the GUI. Unfortunately right now python takes ~20 seconds to run the core loop on my machine while MATLAB can do ~15 loops/second. Since I'm planning on doing 1000 loops (with a randomized comparison condition) on ~30 cases times several exploratory analysis types this is not a trivial difference. I tried running a profiler and array calls are 1/4 of the time, almost all of the rest is unspecified loop time. Here is the python code for the main loop: for basecell in range (0, cellnumber-1): if firstcelltype == np.array((cellrecord[basecell,2])): xloc=np.array((cellrecord[basecell,0])) yloc=np.array((cellrecord[basecell,1])) xedgedist=(xbound-xloc) yedgedist=(ybound-yloc) if xloc>excludedist and xedgedist>excludedist and yloc>excludedist and yedgedist>excludedist: for comparecell in range (0, cellnumber-1): if secondcelltype==np.array((cellrecord[comparecell,2])): xcomploc=np.array((cellrecord[comparecell,0])) ycomploc=np.array((cellrecord[comparecell,1])) dist=math.sqrt((xcomploc-xloc)**2+(ycomploc-yloc)**2) dist=round(dist) if dist>=1 and dist<=analysisdist: arraytarget=round(dist*analysisdist/intervalnumber) addone=np.array((spatialraw[arraytarget-1])) addone=addone+1 targetcell=arraytarget-1 np.put(spatialraw,[targetcell,targetcell],addone) Here is the matlab code for the main loop: for basecell = 1:cellnumber; if firstcelltype==cellrecord(basecell,3); xloc=cellrecord(basecell,1); yloc=cellrecord(basecell,2); xedgedist=(xbound-xloc); yedgedist=(ybound-yloc); if (xloc>excludedist) && (yloc>excludedist) && (xedgedist>excludedist) && (yedgedist>excludedist); for comparecell = 1:cellnumber; if secondcelltype==cellrecord(comparecell,3); xcomploc=cellrecord(comparecell,1); ycomploc=cellrecord(comparecell,2); dist=sqrt((xcomploc-xloc)^2+(ycomploc-yloc)^2); if (dist>=1) && (dist<=100.4999); arraytarget=round(dist*analysisdist/intervalnumber); spatialsum(1,arraytarget)=spatialsum(1,arraytarget)+1; end end end end end end Thanks!

  Read the article

• Painting component inside another component

  - by mike_hornbeck

  I've got a task to display painted 'eyes' with menu buttons to change their colors, and background color. Next animate them. But currently I'm stuck at painting, sinc in my JFrame I've Created JPanel containing panels with drawn eyes and buttons. Buttons are rendered properly but my eyes canvas is not shown. I've tried changing paint to paintComponent, setting contentPane differently but still nothing works. import java.awt.*; import javax.swing.*; public class Main extends JFrame { public static void main(String[] args) { final JFrame frame = new JFrame("Eyes"); frame.setPreferredSize(new Dimension(600, 450)); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); JPanel players = new JPanel(new GridLayout(1, 3)); players.add(new JButton("Eyes color")); players.add(new JButton("Eye pupil")); players.add(new JButton("Background color")); JPanel eyes = new JPanel(); Eyes e = new Eyes(); eyes.add(e); eyes.setPreferredSize(new Dimension(600, 400)); JPanel content = new JPanel(); content.setLayout(new BoxLayout(content, BoxLayout.Y_AXIS)); frame.setContentPane(content); content.add(players); content.add(eyes); // frame.getContentPane().add(content); frame.pack(); frame.setVisible(true); } } class Eyes extends JPanel { public Eyes(){ } public void paint(Graphics g) { super.paintComponent(g); Graphics2D g2d = (Graphics2D) g; g2d.setRenderingHint(RenderingHints.KEY_ANTIALIASING,RenderingHints.VALUE_ANTIALIAS_ON); BasicStroke bs = new BasicStroke(3.0f); g2d.setBackground(Color.green); g2d.setStroke(bs); g2d.setColor(Color.yellow); g2d.fillOval(50, 150, 200, 200); g2d.fillOval( 350, 150, 200, 200); g2d.setColor(Color.BLACK); g2d.drawOval(49, 149, 201, 201); g2d.drawOval(349, 149, 201, 201); g2d.fillOval(125, 225, 50, 50); g2d.fillOval(425, 225, 50, 50); } } This is what I should get : This is what I have : When I've tried painting it directly in JFrame it works almost perfect, apart of background not being set. Why setBackgroundColor doesn't influence my drawing in any way ?

  Read the article

• Large memory chunk not garbage collected

  - by Niels

  In a hunt for a memory-leak in my app I chased down a behaviour I can't understand. I allocate a large memory block, but it doesn't get garbage-collected resulting in a OOM, unless I explicit null the reference in onDestroy. In this example I have two almost identical activities that switch between each others. Both have a single button. On pressing the button MainActivity starts OOMActivity and OOMActivity returns by calling finish(). After pressing the buttons a few times, Android throws a OOMException. If i add the the onDestroy to OOMActivity and explicit null the reference to the memory chunk, I can see in the log that the memory is correctly freed. Why doesn't the memory get freed automatically without the nulling? MainActivity: package com.example.oom; import android.app.Activity; import android.content.Intent; import android.os.Bundle; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; public class MainActivity extends Activity implements OnClickListener { private int buttonId; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); System.gc(); Button OOMButton = new Button(this); OOMButton.setText("OOM"); buttonId = OOMButton.getId(); setContentView(OOMButton); OOMButton.setOnClickListener(this); } @Override public void onClick(View v) { if (v.getId() == buttonId) { Intent leakIntent = new Intent(this, OOMActivity.class); startActivity(leakIntent); } } } OOMActivity: public class OOMActivity extends Activity implements OnClickListener { private static final int WASTE_SIZE = 20000000; private byte[] waste; private int buttonId; protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); Button BackButton = new Button(this); BackButton.setText("Back"); buttonId = BackButton.getId(); setContentView(BackButton); BackButton.setOnClickListener(this); waste = new byte[WASTE_SIZE]; } public void onClick(View view) { if (view.getId() == buttonId) { finish(); } } }

  Read the article

• Problems Embedding Video using FCK Editor

  - by Exline

  Hello, I am using FCK Editor 2.6.4 and having problems trying to embed a (non-YouTube) video into a content area. I found this previous question / post: [EDIT -- as a new user, I am only able to post one link in this post. The post in question is titled, "Can I embed video using FCK Editor?") and have investigated all of the proposed solutions, but none of them work properly: 1 -- Using the "Embed Flash" button in the control panel almost works. However, the video I am attempting to add contains a querystring with parameters, like this: http://static.animoto.com/swf/w.swf?w=swf/vp1&e=1275795594&f=mGQklEgxXKs9vfEIdGnWsA&d=132&m=p&r=w&i=m&ct=Homes%20in%20Eagle%20Creek&cu=http://hometoindy.com/eagle-creek-real-estate.php&options= and in using the Flash embed tool, it encodes all of the "&" characters to "&", thus breaking them. If it were just for me, I could manually change them back, but clients who use this will not know how to do that. 2 -- I have installed the YouTube video plugin, and it works great... for YouTube. But it cannot be used to embed non-YouTube videos (it automatically changes the URL to YouTube, no matter what). 3 -- I have installed the EmbedMovies plugin, but it throws a javascript error when attempting to add a video file (such as the above) to a page. (The EmbedMovies plugin page on SourceForge says it has been updated for FCK Editor 2.6, but it does not work.) 4 -- Pasting directly into the editor window (of course) does not work. The only way I've been able to make this work is by pasting into the Source panel, and this is not a good option for clients who are not familiar with HTML. So, is there a good, working plugin for FCK editor that will allow me to quickly and easily embed a video such as the one above into a content area? I don't need to be able to see or preview it in the editor window; I just need it to work when the page is loaded on the front end. Thanks!

  Read the article

• IntentService android download and return file to Activity

  - by Andrew G

  I have a fairly tricky situation that I'm trying to determine the best design for. The basics are this: I'm designing a messaging system with a similar interface to email. When a user clicks a message that has an attachment, an activity is spawned that shows the text of that message along with a paper clip signaling that there is an additional attachment. At this point, I begin preloading the attachment so that when the user clicks on it - it loads more quickly. currently, when the user clicks the attachment, it prompts with a loading dialog until the download is complete at which point it loads a separate attachment viewer activity, passing in the bmp byte array. I don't ever want to save attachments to persistent storage. The difficulty I have is in supporting rotation as well as home button presses etc. The download is currently done with a thread and handler setup. Instead of this, I'd like the flow to be the following: User loads message as before, preloading begins of attachment as before (invisible to user). When the user clicks on the attachment link, the attachment viewer activity is spawned right away. If the download was done, the image is displayed. If not, a dialog is shown in THIS activity until it is done and can be displayed. Note that ideally the download never restarts or else I've wasted cycles on the preload. Obviously I need some persistent background process that is able to keep downloading and is able to call back to arbitrarily bonded Activities. It seems like the IntentService almost fits my needs as it does its work in a background thread and has the Service (non UI) lifecycle. However, will it work for my other needs? I notice that common implementations for what I want to do get a Messenger from the caller Activity so that a Message object can be sent back to a Handler in the caller's thread. This is all well and good but what happens in my case when the caller Activity is Stopped or Destroyed and the currently active Activity (the attachment viewer) is showing? Is there some way to dynamically bind a new Activity to a running IntentService so that I can send a Message back to the new Activity? The other question is on the Message object. Can I send arbitrarily large data back in this package? For instance, rather than send back that "The file was downloaded", I need to send back the byte array of the downloaded file itself since I never want to write it to disk (and yes this needs to be the case). Any advice on achieving the behavior I want is greatly appreciated. I've not been working with Android for that long and I often get confused with how to best handle asynchronous processes over the course of the Activity lifecycle especially when it comes to orientation changes and home button presses...

  Read the article

• JQuery within a partial view not being called

  - by XN16

  I have a view that has some jQuery to load a partial view (via a button click) into a div in the view. This works without a problem. However within the partial view I have a very similar bit of jQuery that will load another partial view into a div in the first partial view, but this isn't working, it almost seems like the jQuery in the first partial view isn't being loaded. I have tried searching for solutions, but I haven't managed to find an answer. I have also re-created the jQuery function in a @Ajax.ActionLink which works fine, however I am trying to avoid the Microsoft helpers as I am trying to learn jQuery. Here is the first partial view which contains the jQuery that doesn't seem to work, it also contains the @Ajax.ActionLink that does work: @model MyProject.ViewModels.AddressIndexViewModel <script> $(".viewContacts").click(function () { $.ajax({ url: '@Url.Action("CustomerAddressContacts", "Customer")', type: 'POST', data: { addressID: $(this).attr('data-addressid') }, cache: false, success: function (result) { $("#customerAddressContactsPartial-" + $(this).attr('data-addressid')) .html(result); }, error: function () { alert("error"); } }); return false; }); </script> <table class="customers" style="width: 100%"> <tr> <th style="width: 25%"> Name </th> <th style="width: 25%"> Actions </th> </tr> </table> @foreach (Address item in Model.Addresses) { <table style="width: 100%; border-top: none"> <tr id="[email protected]"> <td style="width: 25%; border-top: none"> @Html.DisplayFor(modelItem => item.Name) </td> <td style="width: 25%; border-top: none"> <a href="#" class="viewContacts standardbutton" data-addressid="@item.AddressID">ContactsJQ</a> @Ajax.ActionLink("Contacts", "CustomerAddressContacts", "Customer", new { addressID = item.AddressID }, new AjaxOptions { UpdateTargetId = "customerAddressContactsPartial-" + @item.AddressID, HttpMethod = "POST" }, new { @class = "standardbutton"}) </td> </tr> </table> <div id="[email protected]"></div> } If someone could explain what I am doing wrong here and how to fix it then I would be very grateful. Thanks very much.

  Read the article

• iPhone OpenGL scrolling background jumps when texture is drawn for first time

  - by Magnum39

  I have been fighting a problem for a while now and would appreciate any help anybody could give. I have a sprite that moves within a landscape. The sprite remains in the center of the screen and the background moves to simulate that the sprite is moving within the landscape. I have split the landscape into sections so that I only draw the sections of the landscape that I need (are on screen). The Problem: As a new texture section of the screen appears on the screen (is drawn for the first time) the movement jumps. Almost like a frame is missed. I have done some timing experiments and I do not thinks a frame is missed. My processing is well below the 30fps that I have the animation set to. It only happens the first time the texture section is drawn. Is there something extra that is done the first time a texture is drawn? Here is the code: - (void) render{ // Sets up an array of values to use as the sprite vertices. const GLfloat sVerts[] = { -1.6f, -1.6f, 1.6f, -1.6f, -1.6f, 1.6f, 1.6f, 1.6f, }; static const GLfloat sTexCoords[] = { 0.0, 1.0, 1.0, 1.0, 0.0, 0.0, 1.0, 0.0 }; glDisableClientState(GL_COLOR_ARRAY); glEnableClientState(GL_VERTEX_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); // Setup opengl to draw the object in correct orientation, size, position, etc glLoadIdentity(); // Enable use of the texture glEnable(GL_TEXTURE_2D); glVertexPointer(2, GL_FLOAT, 0, sVerts); glTexCoordPointer(2, GL_FLOAT, 0, sTexCoords); // draw the texture // set the position of the first tile float xOffset = -4.8; float yOffset = 4.8; int i; int y; int currentTexture = textureA; for(i=0; i<2; i++) { for(y=0; y<2; y++) { // test for the texture tile on the screen if not on screen then do not draw float localX = xOffset+(3.21*y); float localY = yOffset-(3.21*i); float xDiff = monkeyX - localX; float yDiff = monkeyY - localY; if(((xDiff < 3.2) && (xDiff > -3.2)) && ((yDiff <2.7) && (yDiff > -2.7))) { // bind the texture and set the vertex data pointers glBindTexture(GL_TEXTURE_2D, spriteTexture[currentTexture]); // move to draw position for the texture glLoadIdentity(); glTranslatef((localX+self.positionX), (localY+self.positionY), 0.0); //draw the texture glDrawArrays(GL_TRIANGLE_STRIP, 0, 4); } currentTexture++; } } }

  Read the article

• How do I overlay text on an image who's size is to be set?

  - by Mike

  I am trying to make a bar chart using tables, which I have almost accomplished to my liking. The last step I want is text over my image which represents the bar. Here is the code I have thus far for building my little bar charts: $height = 50; //build length $width = 450; $multi = $brewAvg / 5; $width = $width * $multi; print " <tr > <td > $count. <a href=\"$breweryURL\"> $brewR</a> </td> <td > <img src=\"blueBar.png\" width=\"$width\" height=\"$height\"> </td> </tr> "; And this produces something like this: You can see in the code how I simply calculate the length of the bar based on a breweries rating. What I want to do next is have the rating number show on top of each breweries on the left hand side. How would I go about accomplishing this? Update: I tried a tutorial I read here: http://www.kavoir.com/2009/02/css-text-over-image.html and I changed my code to this: print "<div class=\"overlay\"> "; print " <tr valign=\"middle\" > <td > $count. <a href=\"$breweryURL\"> $brewR</a> </td> <td > <img src=\"blueBar.png\" width=\"$width\" height=\"$height\"> </td> </tr> "; print" <div class=\"text\"> <p> $brewAvg </p> </div> </div> "; And my css I added was this: <style> .overlay { position:relative; float:left; /* optional */ } .overlay .text { position:absolute; top:10px; /* in conjunction with left property, decides the text position */ left:10px; width:300px; /* optional, though better have one */ } </style> And it did put any of the value son top of my images. All the text is in a list above all the bars like this:

  Read the article

• Add keyboard languages to XP, Vista, and Windows 7

  - by Matthew Guay

  Do you regularly need to type in multiple languages in Windows?  Here we’ll show you the easy way to add and change input languages to your keyboard in XP, Vista, and Windows 7. Windows Vista and 7 come preinstalled with support for viewing a wide variety of languages, so adding an input language is fairly simply.  Adding an input language is slightly more difficult in XP, and requires installing additional files if you need an Asian or Complex script language.  First we show how to add an input language in Windows Vista and 7; it’s basically the same in both versions.  Then, we show how to add a language to XP, and also how to add Complex Script support.  Please note that this is only for adding an input language, which will allow you to type in the language you select.  This does not change your user interface language. Change keyboard language in Windows 7 and Vista It is fairly simple to add or change a keyboard language in Windows 7 or Vista.  In Windows 7, enter “keyboard language” in the Start menu search box, and select “Change keyboards or other input methods”. In Windows Vista, open Control Panel and enter “input language” in the search box and select “Change keyboards or other input methods”.  This also works in Windows 7. Now, click Change Keyboards to add another keyboard language or change your default one. Our default input language is US English, and our default keyboard is the US keyboard layout.  Click Add to insert another input language while still leaving your default input language installed. Here we selected the standard Thai keyboard language (Thai Kedmanee), but you can select any language you want.  Windows offers almost any language you can imagine, so just look for the language you want, select it, and click Ok. Alternately, if you want, you can click Preview to see your layout choice before accepting it.  This is only the default characters, not ones that will be activated with Shift or other keys (many Asian languages use many more characters than English, and require the use of Shift and other keys to access them all).  Once your finished previewing, click close and then press Ok on the previous dialog. Now you will see both of your keyboard languages in the Installed services box.  You can click Add to go back and get more, or move your selected language up or down (to change its priority), or simply click Apply to add the new language. Also, you can now change the default input language from the top menu.  This is the language that your keyboard will start with when you boot your computer.  So, if you mainly use English but also use another language, usually it is best to leave English as your default input language. Once you’ve pressed Apply or Ok, you will see a new icon beside your system tray with the initials of your default input language. If you click it, you can switch between input languages.  Alternately you can switch input languages by pressing Alt+Shift on your keyboard. Some complex languages, such as Chinese, may have extra buttons to change input modes to accommodate their large alphabet. If you would like to change the keyboard shortcut for changing languages, go back to the Input Languages dialog, and select the “Advanced Key Settings” tab.  Here you can change settings for Caps Lock and change or add key sequences to change between languages. Also, the On-Screen keyboard will display the correct keyboard language (here the keyboard is displaying Thai), which can be a helpful reference if your physical keyboard doesn’t have your preferred input language printed on it.  To open this, simply enter “On-Screen keyboard” in the start menu search, or click All Programs>Accessories>On-Screen keyboard. Change keyboard language in Windows XP The process for changing the keyboard language in Windows XP is slightly different.  Open Control Panel, and select “Date, Time, Language, and Regional Options”.   Select “Add other languages”. Now, click Details to add another language.  XP does not include support for Asian and complex languages by default, so if you need to add one of those languages we have details for that below. Click Add to add an input language. Select your desired language from the list, and choose your desired keyboard layout if your language offers multiple layouts.  Here we selected Canadian French with the default layout. Now you will see both of your keyboard languages in the Installed services box.  You can click Add to go back and add more, or move your selected language up or down (to change its priority), or simply click Apply to add the new language. Once you’ve pressed Apply or Ok, you will see a new icon beside your system tray with the initials of your default input language. If you click it, you can switch between input languages.  Alternately you can switch input languages by pressing Alt+Shift on your keyboard. If you would like to change the keyboard shortcut for changing languages, go back to the Input Languages dialog, and click the “Key Settings” button on the bottom of the dialog.  Here you can change settings for Caps Lock and change or add key sequences to change between languages. Add support to XP for Asian and Complex script languages Windows XP does not include support for Asian and Complex script languages by default, but you can easily add them to your computer.  This is useful if you wish to type in one of these languages, or simply want to read text written in these languages, since XP will not display these languages correctly if they are not installed.  If you wish to install Chinese, Japanese, and/or Korean, check the “Install files for East Asian languages” box.  Or, if you need to install a complex script language (including Arabic, Armenian, Georgian, Hebrew, the Indic languages, Thai, and Vietnamese), check the “Install files for complex script and right-to-left languages” box.   Choosing either of these options will open a prompt reminding you that this option will take up more disk space.  Support for complex languages will require around 10Mb of hard drive space, but East Asian language support may require 230 Mb or more free disk space.  Click Ok, and click apply to install your language files. You may have to insert your XP CD into your CD drive to install these files.  Insert the disk, and then click Ok. Windows will automatically copy the files, including fonts for these languages… …and then will ask you to reboot your computer to finalize the settings.  Click Yes, and then reopen the “Add other languages” dialog when your computer is rebooted, and add a language as before.     Now you can add Complex and/or Asian languages to XP, just as above.  Here is the XP taskbar language selector with Thai installed. Conclusion Unfortunately we haven’t found a way to add Asian and complex languages in XP without having an XP disc. If you know of a way, let us know in the comments. (No downloading the XP disc from torrent site answers please) Adding an input language is very important for bilingual individuals, and can also be useful if you simply need to occasionally view Asian or Complex languages in XP.  And by following the correct instructions for your version of Windows, it should be very easy to add, change, and remove input languages. Similar Articles Productive Geek Tips Show Keyboard Shortcut Access Keys in Windows VistaKeyboard Ninja: 21 Keyboard Shortcut ArticlesAnother Desktop Cube for Windows XP/VistaThe "Up" Keyboard Shortcut for Windows 7 or Vista ExplorerWhat is ctfmon.exe And Why Is It Running? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >