Search Results

Search found 7634 results on 306 pages for 'preg replace'.

Page 267/306 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >

• missing files after reassemble of RAID-5

  - by Kris_R

  I had to open my file-server's housing on Sunday to replace a faulty fan. What I didn't see was that one of the sata-cables was not properly connected. The 1st thing I did after a reboot was a check of the RAID status and it showed immediately that one drive is missing. Till this moment the device was not used (however it was mounted, so I'm not 100% sure that system did nothing). I stopped md0 and re-plugged the cable: mdadm --stop /dev/md0 poweroff After another reboot I checked the removed drive: mdadm --examine /dev/sdd1 ... Checksum : 3276bc1d - correct Events : 315782 Layout : left-symmetric Chunk Size : 32K Number Major Minor RaidDevice State this 0 8 49 0 active sync /dev/sdd1 0 0 8 49 0 active sync /dev/sdd1 1 1 8 65 1 active sync /dev/sde1 2 2 8 33 2 active sync /dev/sdc1 3 3 8 17 3 active sync /dev/sdb1 I was a bit surprised that it was shown as active (even if earlier mdadm said, that this device was removed from array) and its checksum was OK. I recreated RAID with: mdadm --assemble /dev/md0 --scan The command mdadm --detail /dev/md0 showed that all drives were running and system was in "clean" state. I mounted the device md0 and then came hic-cup. I wanted to work on one of the last files that I had been using before all the situation and it was not there. In another place I missed actually all files from the directory where I was working. As far as I can see most of the files that are older than a few days are intact but some newer ones are missing. Now the big question: what would be your advice? Is there a way to get these data? I thought about removing the drive that was earlier labeled by mdadm and rebuild array with another empty HDD. I've found that after re-assemble the "broken" drive has another label (changed from sdd to sdb). Can this have influence on rebuilt process? If yes, how to reassemble the array properly? I'm sure the SATA-cables are connected still in the same order to the controller. p.s. Please no advises like "restore from backup". I'm doing back-ups on Sunday's night and this happened in the late afternoon, so backup is not really options for me. p.s.s. I asked this question on Unix&Linux but no answer came up during last two days. I'm getting quite anxious. Sorry for duplicating if any of you reading the other forum.

  Read the article

• Connectivity issues with dual NIC machine in EC2

  - by Matt Sieker

  I'm trying to get some servers set up in EC2 in a Virtual Private Cloud. To do this, I have two subnets: 10.0.42.0/24 - Public subnet 10.0.83.0/24 - Private subnet To bridge these two, I have a Funtoo instance with a pair of NICs: eth0 10.0.42.10 eth1 10.0.83.10 Which has the following routing table: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.83.0 * 255.255.255.0 U 0 0 0 eth1 10.0.83.0 * 255.255.255.0 U 203 0 0 eth1 10.0.42.0 * 255.255.255.0 U 202 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default 10.0.42.1 0.0.0.0 UG 0 0 0 eth0 default 10.0.42.1 0.0.0.0 UG 202 0 0 eth0 An elastic IP is attached to the eth0 interface, and I can connect to it fine remotely. However, I cannot ping anything in the 10.0.83.0 subnet. For now iptables is not set up on the box, so there's no rules that would get in the way (Eventually this will be managed by Shorewall, but I should get basic connectivity done first) Subnet details from the VPC interface: CIDR: 10.0.83.0/24 Destination Target 10.0.0.0/16 local 0.0.0.0/0 [ID of eth1 on NAT box] Network ACL: Default Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY   CIDR: 10.0.83.0/24 VPC: Destination Target 10.0.0.0/16 local 0.0.0.0/0 [Internet Gateway ID] Network ACL: Default (replace) Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY I've been trying to work this out most of the evening, but I'm just stuck. I'm either missing something obvious, or am doing something very wrong. I would think I'd be able to ping from either interface on this box without issue. Hopefully some more pairs of eyes on this configuration will help. EDIT: I am an idiot. After I bothered to install nmap to run some more tests, I discover I can see the ports, and connect to them, pings are just being blocked.

  Read the article

• Why Does Wireless Gear Degrade Over Time?

  - by bahamat

  I saw this originally posted on slashdot, but their comment format is not conducive to actually getting a correct answer. Having directly experienced this phenomenon myself, I'm now asking here where I think I can actually get an educated answer. Here's the original question verbatim: Lately I have replaced several home wireless routers because the signal strength has been found to be degraded. These devices, when new (2+ years ago) would cover an entire house. Over the years, the strength seems to decrease to a point where it might only cover one or two rooms. Of the three that I have replaced for friends, I have not found a common brand, age, etc. It just seems that after time, the signal strength decreases. I know that routers are cheap and easy to replace but I'm curious what actually causes this. I would have assumed that the components would either work or not work; we would either have a full signal or have no signal. I am not an electrical engineer and I can't find the answer online so I'm reaching out to you. Can someone explain how a transmitter can slowly go bad? Common (incorrect, but repeated) answers from slashdot include: Back then your neighbors didn't have wifi, now they do. They drowning you out. I don't think this is likely because replacing the access point with a new one and using the same frequencies solves the problem. Older devices had low transmit power. Crank that baby. As mentioned by a FreeBSD wireless developer this violates regulations and can physically damage the equipment. It was also mentioned that higher power in one direction is not necessarily reciprocated. This shows higher bars, but not necessarily a better connection. Manufacturers make cheap crap designed to wear out. This one actually may be legitimate although it is overly broad. What specifically causes damage over time? Heat? Excessive power? So can anyone provide an informed answer on this? Is there any way to fix these older access points?

  Read the article

• fink hangs while compiling Octave on OS X

  - by Mark Bennett

  Disclaimer: I'm totally new to Fink. I'm trying to install Octave (Matlab open source clone) on Mountain Lion using Fink, following instructions at http://wiki.octave.org/Octave_for_MacOS_X It's a new installation of Fink, and I've also installed X11 per instructions. I'm using this command (which I believe is correct since everything's 64 bit now): sudo fink install octave-atlas It's hanging after a while, showing this as it's last output: ... Setting up xft2-dev (2.2.0-2) ... Clearing dependency_libs of .la files being installed Reading buildlock packages... All buildlocks accounted for. /sw/bin/dpkg-lockwait -i /sw/fink/dists/stable/main/binary-darwin-x86_64/x11/xinitrc_1.5-1_darwin-x86_64.deb (Reading database ... 14871 files and directories currently installed.) Preparing to replace xinitrc 1.5-1 (using .../xinitrc_1.5-1_darwin-x86_64.deb) ... Unpacking replacement xinitrc ... Setting up xinitrc (1.5-1) ... I did notice the process name on the terminal's tab was "sort", so the second time I hit this I tried Control-D (End-of-File), and this did seem to unstick it. I'm wondering if there's some misformed command and sort was trying to read from stdin? Questions: 1: Has anybody else seen this? Google wasn't helpful 2: Fink outputs a LOT of warnings and errors.... is that normal? 3: wondering if anybody's got Fink to compile Octave on Mountain Lion specifically? And whether they used just "octave" or "octave-atlas". Or if you got it working with MacPorts or Homebrew? 4: later Fink failed with "Failed: phase compiling: gnuplot-minimal-4.6.1-1 failed". I haven't started googling that yet... but wondering if anybody's see that? Also tried MacPorts but got other errors with Octave. And reading online it looks like HomeBrew also has issues with Octave on Mountain Lion. 5: Generally looking for anybody who's got Octave running on Mountain Lion with any of the package managers. I've been at this for a couple days ;-)

  Read the article

• Getting Classic ASP to work in .js files under IIS 7

  - by Abdullah Ahmed

  I am moving a clients classic asp webapp to a new IIS7 based server. The site contains some .js files which have javascript but also classic asp in <% % tags which contains a bunch of conditional statements designed to spit out pieces of javascript based on session state variables. Here's a brief example of what the file could be like.... var arrHOFFSET = -1; var arrLeft ="<"; var arrRight = ">"; <% If ((Session("dashInv") = "True") And ((Session("systemLevelStaff") = "4") Or (Session("systemLevelCompany") = "4"))) Then %> addMainItem("/MgmtTools/WelcomeInventory.asp?wherefrom=salesMan","",81,"center","","",0,0,"","","","",""); <% Else %> <% If (Session("dashInv") = "False") And ((Session("systemLevelStaff") = "4") Or (Session("systemLevelCompany") = "4")) Then %> <% Else %> addMainItem("/calendar/welcome.asp","",81,"center","","",0,0,"","","","",""); <% End If %> <% End If %> defineSubmenuProperties(135,"center","center",-3,0,"","","","","","",""); Currently this file (named custom.js for example) will start throwing js errors, because the server doesnt seem to recognize the asp code in it and therefore does not parse it. I know I need to somehow specify that a .js file should also be treated like an .asp file and run through parsing it. However I am not sure how to go about doing this. Here is what I've tried so far... Under the Server node in IIS under HANDLER MAPPINGS I created a new Script Map with the following settings. Request Path: *.js Executable: C:\Windows\System32\inetsrv\asp.dll Name: ASPClassicInJSFiles Mapping: Invoke Handler only if request is mapped to : File Verbs: All verbs Access: Script I also created a similar handler under the site node itself. Under MIME Types .js is defined as application/x-javascript None of these work. If I simply rename the file to have .asp extension then things work, however this app is poorly coded and has literally 100's of files with the .js files included in them under various names and locations, so rename, search and replace is the last option I have.

  Read the article

• LUKS with LVM, mount is not persistent after reboot

  - by linxsaga

  I have created a Logical vol and used luks to encrypt it. But while rebooting the server. I get a error message (below), therefore I would have to enter the root pass and disable the /etc/fstab entry. So mount of the LUKS partition is not persistent during reboot using LUKS. I have this setup on RHEL6 and wondering what i could be missing. I want to the LV to get be mount on reboot. Later I would want to replace it with UUID instead of the device name. Error message on reboot: "Give root password for maintenance (or type Control-D to continue):" Here are the steps from the beginning: [root@rhel6 ~]# pvcreate /dev/sdb Physical volume "/dev/sdb" successfully created [root@rhel6 ~]# vgcreate vg01 /dev/sdb Volume group "vg01" successfully created [root@rhel6 ~]# lvcreate --size 500M -n lvol1 vg01 Logical volume "lvol1" created [root@rhel6 ~]# lvdisplay --- Logical volume --- LV Name /dev/vg01/lvol1 VG Name vg01 LV UUID nX9DDe-ctqG-XCgO-2wcx-ddy4-i91Y-rZ5u91 LV Write Access read/write LV Status available # open 0 LV Size 500.00 MiB Current LE 125 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 [root@rhel6 ~]# cryptsetup luksFormat /dev/vg01/lvol1 WARNING! ======== This will overwrite data on /dev/vg01/lvol1 irrevocably. Are you sure? (Type uppercase yes): YES Enter LUKS passphrase: Verify passphrase: [root@rhel6 ~]# mkdir /house [root@rhel6 ~]# cryptsetup luksOpen /dev/vg01/lvol1 house Enter passphrase for /dev/vg01/lvol1: [root@rhel6 ~]# mkfs.ext4 /dev/mapper/house mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 127512 inodes, 509952 blocks 25497 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67633152 63 block groups 8192 blocks per group, 8192 fragments per group 2024 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409 Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 21 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@rhel6 ~]# mount -t ext4 /dev/mapper/house /house PS: HERE I have successfully mounted: [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# vim /etc/fstab -> as follow /dev/mapper/house /house ext4 defaults 1 2 [root@rhel6 ~]# vim /etc/crypttab -> entry as follows house /dev/vg01/lvol1 password [root@rhel6 ~]# mount -o remount /house [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# umount /house/ [root@rhel6 ~]# mount -a -> SUCCESSFUL AGAIN [root@rhel6 ~]# ls /house/ lost+found Please let me know if I am missing anything here. Thanks in advance.

  Read the article

• How do I protect a low budget network from rogue DHCP servers?

  - by Kenned

  I am helping a friend manage a shared internet connection in an apartment buildling with 80 apartments - 8 stairways with 10 apartments in each. The network is laid out with the internet router at one end of the building, connected to a cheap non-managed 16 port switch in the first stairway where the first 10 apartments are also connected. One port is connected to another 16 port cheapo switch in the next stairway, where those 10 apartments are connected, and so forth. Sort of a daisy chain of switches, with 10 apartments as spokes on each "daisy". The building is a U-shape, approximately 50 x 50 meters, 20 meters high - so from the router to the farthest apartment it’s probably around 200 meters including up-and-down stairways. We have a fair bit of problems with people hooking up wifi-routers the wrong way, creating rogue DHCP servers which interrupt large groups of the users and we wish to solve this problem by making the network smarter (instead of doing a physical unplugging binary search). With my limited networking skills, I see two ways - DHCP-snooping or splitting the entire network into separate VLANS for each apartment. Separate VLANS gives each apartment their own private connection to the router, while DHCP snooping will still allow LAN gaming and file sharing. Will DHCP snooping work with this kind of network topology, or does that rely on the network being in a proper hub-and-spoke-configuration? I am not sure if there are different levels of DHCP snooping - say like expensive Cisco switches will do anything, but inexpensive ones like TP-Link, D-Link or Netgear will only do it in certain topologies? And will basic VLAN support be good enough for this topology? I guess even cheap managed switches can tag traffic from each port with it’s own VLAN tag, but when the next switch in the daisy chain receives the packet on it’s “downlink” port, wouldn’t it strip or replace the VLAN tag with it’s own trunk-tag (or whatever the name is for the backbone traffic). Money is tight, and I don’t think we can afford professional grade Cisco (I have been campaigning for this for years), so I’d love some advice on which solution has the best support on low-end network equipment and if there are some specific models that are recommended? For instance low-end HP switches or even budget brands like TP-Link, D-Link etc. If I have overlooked another way to solve this problem it is due to my lack of knowledge. :)

  Read the article

• Assign fixed IP address via DHCP by DNS lookup

  - by Janoszen

  Preface I'm building a virtualization environment with Ubuntu 14.04 and LXC. I don't want to write my own template since the upgrade from 12.04 to 14.04 has shown that backwards compatibility is not guaranteed. Therefore I'm deploying my virtual machines via lxc-create, using the default Ubuntu template. The DNS for the servers is provided by Amazon Route 53, so no local DNS server is needed. I also use Puppet to configure my servers, so I want to keep the manual effort on the deployment minimal. Now, the default Ubuntu template assigns IP addresses via DHCP. Therefore, I need a local DHCP server to assign IP addresses to the nodes, so I can SSH into them and get Puppet running. Since Puppet requires a proper DNS setup, assigning temporary IP addresses is not an option, the client needs to get the right hostname and IP address from the start. Question What DHCP server do I use and how do I get it to assign the IP address based only on the host-name DHCP option by performing a DNS lookup on that very host name? What I've tried I tried to make it work using the ISC DHCP server, however, the manual clearly states: Please be aware that only the dhcp-client-identifier option and the hardware address can be used to match a host declaration, or the host-identifier option parameter for DHCPv6 servers. For example, it is not possible to match a host declaration to a host-name option. This is because the host-name option cannot be guaranteed to be unique for any given client, whereas both the hardware address and dhcp-client-identifier option are at least theoretically guaranteed to be unique to a given client. I also tried to create a class that matches the hostname like this: class "my-client-name" { match if option host-name = "my-client-name"; fixed-address my-client-name.my-domain.com; } Unfortunately the fixed-address option is not allowed in class statements. I can replace it with a 1-size pool, which works as expected: subnet 10.103.0.0 netmask 255.255.0.0 { option routers 10.103.1.1; class "my-client-name" { match if option host-name = "my-client-name"; } pool { allow members of "my-client-name"; range 10.103.1.2 10.103.1.2; } } However, this would require me to administer the IP addresses in two places (Amazon Route53 and the DHCP server), which I would prefer not to do. About security Since this is only used in the bootstrapping phase on an internal network and is then replaced by a static network configuration by Puppet, this shouldn't be an issue from a security standpoint. I am, however, aware that the virtual machine bootstraps with "ubuntu:ubuntu" credentials, which I intend to fix once this is running.

  Read the article

• PHP: gethostbyname() suddenly no longer resolves names to IPs when run in Apache

  - by hurikhan77

  One of our older legacy servers which gets no further updates or reconfigurations suddenly stopped resolving hostnames to IPs when PHP is executed within Apache. However, it still works fine when executed from the CLI. From the RSS caches last modification time, I deduce that it stopped working on around Mar, 28th. To reproduce the problem, I created a script using fsockopen() and it said "connection failed (errno 2)". I further reduced the problem to being related with a failed name resolution: <?php $addr = gethostbyname("twitter.com"); echo "ADDR($addr)"; ?> When I run this through Apache, the output is ADDR(twitter.com), which is wrong. When I run this from the CLI, the output is ADDR(aaa.bbb.ccc.ddd) with varying IP addresses, as expected. Nothing on the server setup has changed. CLI and Apache module share the same php.ini. PHP is version v4.4.9 with Zend Optimizer v2.5.10. Apache is v1.3.31. I know the versions are old. But since nothing has been changed, a solution like "try to upgrade versions first" is no solution as the server's feature set/versioning is frozen and will be replaced soon. Still we need a solution. If I run dig through the script, it works in both environments (mod_php and CLI) but this is more than an ugly hack as it would involve many edits and testing throughout the whole script base which is also undesired as the PHP application on the server is frozen, too, and only receives security updates. It will be replaced by a complete rewrite (on the new server). But as the rewrite will take some time and successive replace parts of the legacy application, we need a fix for the resolver problem. I already googled a bit and while the problem is known, many did not find a fix. The fix to raise memory limits did not work. Restarts did not work. The resolver in mod_php just did stop working for no apparent reason. :-(

  Read the article

• Ubuntu Natty: 32-bit userland, 64-bit kernel?

  - by dsimcha

  I'm trying to manually install a 64-bit kernel for 32-bit Ubuntu. I have my reasons for doing so, but they're too complicated to explain here. Prior to Natty, this worked fine. Now, on Natty, I get the following error message when I try doing it the same way: dsimcha@dsimcha-laptop:~$ sudo dpkg -i --force-architecture linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb [sudo] password for dsimcha: dpkg: error processing linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb (--install): cannot access archive: No such file or directory Errors were encountered while processing: linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb dsimcha@dsimcha-laptop:~$ cd Downloads/ dsimcha@dsimcha-laptop:~/Downloads$ sudo dpkg -i --force-architecture linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb dpkg: warning: overriding problem because --force enabled: package architecture (amd64) does not match system (i386) (Reading database ... 159153 files and directories currently installed.) Preparing to replace linux-image-2.6.38-8-server:amd64 2.6.38-8.42 (using linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb) ... Done. Unpacking replacement linux-image-2.6.38-8-server:amd64 ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.38-8-server /boot/vmlinuz-2.6.38-8-server run-parts: executing /etc/kernel/postrm.d/zz-update-grub 2.6.38-8-server /boot/vmlinuz-2.6.38-8-server dpkg: dependency problems prevent configuration of linux-image-2.6.38-8-server:amd64: linux-image-2.6.38-8-server:amd64 depends on initramfs-tools (>= 0.36ubuntu6). linux-image-2.6.38-8-server:amd64 depends on coreutils | fileutils (>= 4.0); however: Package coreutils:amd64 is not installed. linux-image-2.6.38-8-server:amd64 depends on module-init-tools (>= 3.3-pre11-4ubuntu3); however: linux-image-2.6.38-8-server:amd64 depends on wireless-crda; however: dpkg: error processing linux-image-2.6.38-8-server:amd64 (--install): dependency problems - leaving unconfigured Errors were encountered while processing: linux-image-2.6.38-8-server:amd64 When I try the dependencies manually, I get, for example: dsimcha@dsimcha-laptop:~/Downloads$ sudo dpkg -i --force-architecture coreutils_8.5-1ubuntu6_amd64.deb dpkg: warning: overriding problem because --force enabled: package architecture (amd64) does not match system (i386) dpkg: error processing coreutils_8.5-1ubuntu6_amd64.deb (--install): coreutils:amd64 8.5-1ubuntu6 (Multi-Arch: no) is not co-installable with coreutils:i386 8.5-1ubuntu6 (Multi-Arch: no) which is currently installed Errors were encountered while processing: coreutils_8.5-1ubuntu6_amd64.deb Has anyone had any success installing 64-bit kernels on 32-bit Natty? If so, how can this be done?

  Read the article

• Gateway GT5220 Boot/POST Failure

  - by John Rudy

  I have a Gateway GT5220 I'm troubleshooting. It is, in fact, the machine I just gave my father for his birthday a couple months ago. (Prior to that, it was my home PC. My home PC is now the MacBook on which I'm writing this.) Before going any further, I suspect that the answer will be, "It's worse than that, it's dead, Jim, it's dead, Jim, it's dead, Jim." At least, mobo and/or CPU. The initial symptoms were as follows: Turn on power All fans fire up (thus making it so I can't hear if the hard drive is spinning or not, nor are my hands sensitive enough anymore to feel it) No LEDs remained lit on the front panel. (Initially, the hard drive indicator flashed briefly.) No beep, no video, no nothing. Following some advice I found here, I tried to "drain the stored power." After following those steps, the new symptoms were: Turn on power All fans fire up The front panel LEDs remained lit! After about 20, maybe 30 seconds, we had video! Sort of. We got to the Gateway splash/POST screen, which appeared thoroughly corrupted. How corrupted? Well, I imagine it's what a POST screen would look like after reading the wrong passage out of the Necronomicon: It stayed there. I gave it at least 5, maybe 6 minutes, and it didn't move. So I shut her down, started her up again, and now (this is where we currently stand, symptomatically) we have this: Turn on power All fans fire up The front panel LEDs remain lit No video, no beep, no nothing. I'm a software guy; haven't done real hardware troubleshooting in years. My gut tells me that the mobo and/or CPU is fried, and unfortunately my gut didn't get to be as big as it is being wrong all the time. :( In addition to the link above, I have read all of the following (trying to save you some LMGTFY trouble): Gateway Support POST Error Messages and Handling About a zillion (useless) POST beep code sites A kioskea.net post indicating that most likely we're at what I consider "total loss" (mobo and/or CPU) My questions: Are there any conditions other than mobo/CPU that could cause symptoms like these? Is it worth my time to try the next hardware troubleshooting step?(IE, remove all non-critical hardware from the machine, try to boot, systematically replace one by one until we find the failing component) Which mobos will fit in the Gateway GT5220 case (with rear ports correctly aligned)? (Why this is not a dupe: I wouldn't have posted this question if it hadn't been for the funkadelic possessed video display on the one occasion we got video out. I think that justified this not being an exact dupe. Of course, if the community overrules, I will understand.)

  Read the article

• Troubleshooting major performance issue: Is culprit Intel RST, Hard drive, or something else?

  - by Sean Killeen

  The Setup I have the following components that come into play in this situation: ASUS P8Z68 V/PRO motherboard a RAID1 configuration (1x 1TB drive, 1 x 2TB drive -- I explain below), accelerated with an SSD using Intel's RST software, and 1 TB drive standing by as a spare. Core i7 2600k 32 GB RAM Windows 8.1 This box was designed to be beast, and until just recently, was very good at being just that. What's Happening The system has slowed to a crawl whenever it touches the disk. Things appear to work at normal speed when dealing with memory. For example, typing this is fine, but saving it to disk from notepad gave me a 5-7 second pause when clicking save. The disks appear to be at 100% all the time (e.g. the light on the disk access on the PC is solidly on -- not even any flashing) In ProcExp it appears that the disk is barely being utilized at all: Intel RST reports that everything is fine: Other Details Prior to this happening, RST had reported that my drives were failing (one went bad, one was throwing SMART events). This made sense; they were at the tail end of their warranty and the PC is on almost all the time. I RMA'd the drives via Seagate. In the meantime, I'd purchased a 2TB drive because I didn't realize that the 1TB drives were under warranty. I figured I'd replace the other 1 TB drive with another 2 TB when it died but then discovered the warranty. AFAIK, I haven't done any major updates since 8.1 and it worked fine after those. Question(s) How can I troubleshoot this? What is the best way to try to figure out why disks are being maxed out despite the OS reporting barely any disk usage and that everything is OK? Given the failures, etc. that I describe above, is it possible that the problem could be the I/O on the motherboard itself? If so, how would I even be able to diagnose it? I'm betting the drives that Seagate gave me are refurbished (didn't think to look; that's dumb). Is it possible that the same model drive, refurbished, could somehow cause this? In terms of how RAID1 works, is it possible that one drive is "falling behind" somehow, and that the RAID1 is constantly trying to fix the mirroring? If so, this seems like Intel RST would report on it, but I wanted to consider it as an option.

  Read the article

• Varnish + Plesk : vhost broken

  - by Raphaël

  I have an e-commerce site with 300,000 products and 20,000 categories. It is slow and currently in production. I decided to install Varnish to speed up. The trouble is that during installation, I got a Guru Meditation. Since the site is in production, I am not allowed to leave this error more than a second, thinking to have made an enormous stupidity. I followed the following tutorial: http://www.euperia.com/linux/setting-up-varnish-with-apache-tutorial I'm sure I followed all without error. I say that there may be a specific configuration with plesk. Has anyone already installed Varnish on a ubuntu 11.04 server with plesk 10? Does anyone have a better resource? I know it is "very vague" as an error, but maybe some of you have had this problem. edit 24/11/2011 I continued to work on Varnish + Plesk ... but it still does not work. 1) I changed the port for apache in plesk General # mysql -uadmin -p`cat /etc/psa/.psa.shadow` -D psa -e'replace into misc (param, val) values ("http_port", 8008)' 1.1) I rebuild the server conf # /usr/local/psa/admin/bin/httpdmng --reconfigure-all 2) I changed the apache conf files (if those were not taking full plesk top) vim /etc/apache2/ports.conf NameVirtualHost *:8008 Listen 8008 2.1) I do the same with /etc/apache2/sites-enables/000-default 3) I changed the port of my vhost (a single server) vim /var/www/vhosts/MYDOMAIN.COM/conf/XXXXXXXXX.http.include Replace the port 80 by this I want. Rebuild the vhost conf /usr/local/psa/admin/sbin/websrvmng --reconfigure-vhost --vhost-name=<domain_name> with without www (See my issue in serverfault: Edit vhost port in plesk 10.3 ) 4) I installed varnish by following this tutorial : http://www.euperia.com/linux/setting-up-varnish-with-apache-tutorial 5) I restart apache 2 + varnish service apache2 restart service varnish restart When I go to my site, I come across a page of apache It works! This is the default web page for this server. The web server software is running but no content has been added, yet. Can somebody help me ? This means that my vhost does not point to the right place. Why? What to do? How?

  Read the article

• Odd squid transparent redirect behavior

  - by EMiller

  This is the first time I've set up squid. It's running a redirect script that does some text search/replace on html pages, and then saves them to a location on the same machine on the nginx path - then issues the redirect to that URL (it's an art project :D). The relevant lines in squid.conf are http_port 3128 transparent redirect_program /etc/squid/jefferson_redirect.py The jefferson_redirect.py script is based on this script: http://gofedora.com/how-to-write-custom-redirector-rewritor-plugin-squid-python/ The issue: I'm getting strange http redirect behavior. For example, here is the normal request/response from a PHP script that issues a header("Location:"); - a 302 redirect: http://redirector.mysite.com/?unicmd=g+yreka GET /?unicmd=g+yreka HTTP/1.1 Host: redirector.mysite.com User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.9) Gecko/20100330 Fedora/3.5.9-1.fc12 Firefox/3.5.9 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive HTTP/1.1 302 Found Date: Tue, 13 Apr 2010 05:15:43 GMT Server: Apache X-Powered-By: PHP/5.2.11 Location: http://www.google.com/search?q=yreka Content-Type: text/html Vary: User-Agent,Accept-Encoding Content-Encoding: gzip Content-Length: 2108 Keep-Alive: timeout=3, max=100 Connection: Keep-Alive Here's what it looks like when running through the squid proxy (note that "redirector.mysite.com" is not the site running squid or nginx): http://redirector.mysite.com/?unicmd=g+yreka GET /?unicmd=g+yreka HTTP/1.1 Host: redirector.mysite.com User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.9) Gecko/20100330 Fedora/3.5.9-1.fc12 Firefox/3.5.9 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Proxy-Connection: keep-alive If-Modified-Since: Tue, 13 Apr 2010 05:21:02 GMT HTTP/1.0 200 OK Server: nginx/0.7.62 Date: Tue, 13 Apr 2010 05:21:10 GMT Content-Type: text/html Content-Length: 17865 Last-Modified: Tue, 13 Apr 2010 05:21:10 GMT Accept-Ranges: bytes X-Cache: MISS from jefferson X-Cache-Lookup: HIT from jefferson:3128 Via: 1.1 jefferson:3128 (squid/2.7.STABLE6) Connection: keep-alive Proxy-Connection: keep-alive It is basically working - but the URL http://redirector.mysite.com/?unicmd=g+yreka remains unchanged, while displaying the google page (mostly broken as it's using URLs relative to redirector.mysite.com) I've experienced a similar thing with google results pages: when clicking to another page from google, I get a google URL, with the other site's content. Sorry for the long post - many thanks if you've read this far! Any ideas?

  Read the article

• WinXP - Having trouble sharing internet with 3G USB modem via ICS

  - by Carlos Nunez

  all! I've been banging my head against a wall with this issue for a few days now and am hoping someone can help out. I recently signed up for T-Mobile's webConnect 3G/4G service to replace the faltering (and slow) DSL connection in my apartment. The goal was to put the SIM in one of my old phones and use its built-in WLAN tethering feature to share Internet out to rest of my computers. I quickly found out that webConnect-provisioned SIMs do not work with regular smartphones, so I was forced to either buy a 4G-compatible router or tether one of my old laptops to my wireless router and share out that way. I chose the latter, and it's sharpening my inner masochistic self by the day. Here's the setup: GSM USB modem (via hub), ICS host - 10/100 Mbps Ethernet NIC, ICS "guest" - WAN port of my SMC WGBR14N wireless router in bridged mode (i.e. wireless access point). Ideally, this would make my laptop the DHCP server and internet gateway with the WAP giving everyone wireless coverage. I can browse internet on the host laptop fine. However, when clients try to connect, they get a DHCP-assigned IP from the laptop and are able to use the Internet for a few minutes before completely dying. After that happens, they are able to re-associate with the WAP and get IP addresses, but are unable to use Internet or resolve IP addresses until the laptop and router are restarted. If they do get access, it's very, very slow. After running Wireshark on the host machine, it turns out that this is because every TCP connection keeps getting RST. DNS seems to work. I would normally think the firewall is the culprit here, but when it drops packets, it drops them completely. The fact that TCP connections are being ACK'ed by the destination rules that out. Of course, none of the event Log isn't saying anything about what's going on. I also tried disabling power management on the NIC, since that's caused problems in the past; that didn't help either. I finally disabled receive-side scaling as per a Microsoft KB (that applied to Windows Server 2003, SP2) to no avail. I'm thinking of trying it with a different NIC (will be tough; don't have a spare Ethernet NIC around for the laptop), but I'm getting the impression that this simply doesn't work. Can anyone please advise? I apologise for the length of this post; all contributions are much appreciated! -Carlos.

  Read the article

• Safer RAID5 rebuilds using partially failed disks?

  - by arcticmac

  There have been lots of articles posted recently about how RAID5 is dangerous because of long resilver times, and in particular because of increasing chances of encountering a URE during the resilver. Obviously this is a significant concern. However, it seems that in many cases of interest (as long as you're keeping some kind of eye on your disks), when it comes time to rebuild the array, the disk that I'm replacing is still mostly readable. If you try to explain this predicament to the average layperson, they are typically very confused as to why you have two almost completely functional disks but can't produce one working array. It seems to me that there ought to be some way to take advantage of this to make rebuilds safer, as long as I'm willing to have the RAID5 be read-only for a couple of days while it rebuilds. Conceptually, what I have in mind looks something like this: When a disk fails, immediately take the RAID5 offline or mount it read-only Attach a new disk (either in a spare bay, or externally via eSATA) and begin rebuilding it to replace the failed one. If known, perhaps start with the stripes in which the failure occurred, to minimize the chances of losing those if another disk fails. In the event that a second disk experiences a URE or other failure during the rebuild, try to source that data from the disk that is being replaced. Presumably if this happens, more rebuilding would be necessary. When complete, shut down the server, swap the replacement drive into the original bay if desired, and bring the array back up. Obviously such a process would not be appropriate for applications where uptime is critical or data loss cannot be tolerated, but it seems to me that this could help considerably to improve the reliability of RAID5. I assume that there's not a good way to implement a recovery like this at present, given that I haven't seen any indication of tools that are designed to do this, and that it seems like it would be rather obtuse to work out manually. Are there also technical issues with it that I haven't thought of (I'm still fairly new to RAID stuff)? Any thoughts on how hard something like this would be to implement (e.g. in linux md raid)?

  Read the article

• Windows 7 laptop constantly dropping internet connection

  - by Corbin Holbert

  I have scoured the web for an answer and failed to find one. I am using a Toshiba Satellite laptop running Windows 7 64-Bit. I have the computer connected via Wifi. Now, I am no beginner with the Internet, or anything related to computers, as I have grown up teaching everyone around me how to use computers, and went to college for IT. Everything on my network works flawlessly at all times, except for this evil laptop. The worst part is that I fixed this once before a few years back and recently had to replace the hard drive and re-install the OS, but cannot for the life of me remember what I did to make this problem go away. I am in my browser, connected to the Internet. I click a link. Suddenly no internet access. All I do is click down on the WiFi connection in the task bar, disconnect and reconnect immediately. Internet is back the moment I hit "connect." I have read many people had the same issues as I am having, but they all had triggers or other network issues. I have no trigger (this happens literally five to six times per minute no matter what I am doing) and I have no problems with my router, modem, or any other devices or computers on said network. As I am a web designer, and like to test my work live at every turn- this is going to result in this laptop being in pieces if I can't get it fixed soon. If more info is needed, let me know and I will provide. Thanks for any help offered! EDIT: Network Card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC Network state reads as "No Internet Access" when the problem first occurs, then magically I have Internet access for about ten seconds once I disconnect and reconnect. I have turned off IPV6, I have turned off power saving options for the network adapter, no viruses. Any new ideas? Also, I had to disconnect and reconnect four times just to get to this edit screen- and will likely have to do the same just to post it- it's that bad.

  Read the article

• Why can't I use SSL certs imported via Server Admin in a custom Apache install?

  - by morgant

  I've got a couple of Mac OS X 10.6.8 Server web servers that run a custom AMP255 (Apache 2.x, MySQL 5.x, and PHP 5.x) stack installed using MacPorts. We've got a lot of Mac OS X Server servers and generally install SSL certs via Server Admin and they "just work" in the built-in services, however, these web servers have always had SSL certs installed in a non-standard location and used only for Apache. Long story short, we're trying to standardize this part of our administration and install certs via Server Admin, but have run into the following issue: when the certs are installed via Server Admin and referenced in our Apache conf files, Apache then prompts for a password upon trying to start. It does not seem to be any password we know, certainly not the admin or keychain passwords! We've added the _www user to the certusers (mainly just to ensure they have the proper access to the private key in /etc/certificates/). So, with the custom installed certs we have the following files (basically just pasted in from the company we purchase our certs from): -rw-r--r-- 1 root admin 1395 Apr 10 11:22 *.domain.tld.ca -rw-r--r-- 1 root admin 1656 Apr 10 11:21 *.domain.tld.cert -rw-r--r-- 1 root admin 1680 Apr 10 11:22 *.domain.tld.key And the following in the VirtualHost in /opt/local/apache2/conf/extra/httpd-ssl.conf: SSLCertificateFile /path/to/certs/*.domain.tld.cert SSLCertificateKeyFile /path/to/certs/*.domain.tld.key SSLCACertificateFile /path/to/certs/*.domain.tld.ca This setup functions normally. If we use the certs installed via Server Admin, which both Server Admin & Keychain Assistant show as valid, they're installed in /etc/certificates/ as follows: -rw-r--r-- 1 root wheel 1655 Apr 9 13:44 *.domain.tld.SOMELONGHASH.cert.pem -rw-r--r-- 1 root wheel 4266 Apr 9 13:44 *.domain.tld.SOMELONGHASH.chain.pem -rw-r----- 1 root certusers 3406 Apr 9 13:44 *.domain.tld.SOMELONGHASH.concat.pem -rw-r----- 1 root certusers 1751 Apr 9 13:44 *.domain.tld.SOMELONGHASH.key.pem And if we replace the aforementioned lines in our httpd-ssl.conf with the following: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCertificateChainFile /etc/certificates/*.domain.tld.SOMELONGHASH.chain.pem This prompts for the unknown password. I have also tried httpd-ssl.conf configured as follows: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCertificateChainFile /etc/certificates/*.domain.tld.SOMELONGHASH.concat.pem And as: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCACertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.chain.pem We've verified that the certificate is configured to allow all applications access it (in Keychain Assistant). A diff of the /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem & *.domain.tld.key files shows the former is encrypted and the latter is not, so we're assuming that Server Admin/Keychain Assistant is encrypting them for some reason. I know I can create an unencrypted key file as follows: sudo openssl rsa -in /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem -out /etc/certificates/*.domain.tld.SOMELONGHASH.key.no_password.pem But, I can't do that without entering the password. I thought maybe I could export an unencrypted copy of the key from Keychain Admin, but I'm not seeing such an option (not to mention that the .pem options are greyed out in all export options). Any assistance would be greatly appreciated.

  Read the article

• Need Windows XP VGA driver for i3 Haswell

  - by AFH

  Background: I have recently upgraded my hardware because the previous Pentium system started failing to the point that it would not run long enough to boot. It was obviously a hardware fault, but I had no way of knowing whether it was in the motherboard, CPU or memory. Not all the components were now available, so I decided to replace all three. In order to get some benefit from the expenditure, I though I would put in faster components, and for future-proofing went for recently released ones: MSI Z87-G41-PCMate and Intel i3-4130 with 4400 HD graphics. The system performs excellently with Ubuntu 13.10, so I know there are no hardware problems, but I need to continue running XP because it runs several thousand pounds (UK) worth of software, which meets my needs more than adequately: in some cases there is no longer support for later Windows releases, and in most others an expensive and to me unnecessary upgrade is required. Problem: The motherboard specifications claim Windows XP support for the live driver update utility, which misled me into believing that XP drivers were available. Not true: Intel have apparently refused to provide XP drivers for Haswell chips. The update program runs on XP, but finds no suitable Intel drivers. The system is more or less running on the default fail-safe VGA driver, but DirectX will not load, which stops a number of my applications from running. I have been trawling the internet for a month now, but I have not found a graphics driver which will load successfully: all show "This device cannot start. (code 10)". I don't need HDMI support: my monitor is 1280x1024 and connected through the VGA port, so all I need is a driver which will handle this resolution well enough to support DirectX. Has anyone found a driver which will do this? Please don't reply with information found from internet searches, unless you have actually solved this problem: be assured that I have been all round the houses looking at solutions which others have reported as working, but none of them does for me. Incidentally, I did find an Intel HD sound driver which XP accepts (winxp_145111.exe from Intel), though without connecting to an HDMI port on a TV or sound system I have no idea if it works in practice. However, the graphics section of the same driver fails, like all the others I've tried.

  Read the article

• How can I play my MP3 files through my stereo system?

  - by Joel Coehoorn

  Here's the situation. Like many others I have my entire CD collection ripped to my PC, along side other music I've acquired through iTunes or Amazon MP3. Also like many others the speakers at my PC are underpowered, and likely included in my monitor as an afterthought. This is fine for most use: system sounds, YouTube, etc. Even games sounds and music. But I'd like something a little better for when I really want to listen to music. And I have it; in the next room — barely 25 feet away as the crow flies — sits a nice 400 watts stereo system. The stereo supports MP3 CDs, so up to this point I've just kept a few CD-RW disks around to keep most of my collection available. But it's time to move on to something a little more sophisticated. What are my options for using the MP3 files available on my computer as an input for this stereo? Some notes: I want to be able to control what song the stereo is playing without having to go to the PC, including setting up and retrieving playlists. Ideally this should even be able to wake the PC from sleep mode to start playing. I primarily use Windows Media Player on the PC (which runs Windows Vista). However, the files themselves live on a server running Windows Server 2008, and so I could also install something on the server and run everything from there. The axillary input on the stereo is unfortunately limited to a 1/8 inch stereo mini-plug. I'm loath to run wires across two rooms, and I'm considering moving the stereo to the garage at some point. Therefore a wireless solution that can easily cover about 100 ft or so is preferred. I already have a Wi-Fi network ready, but it's secured so anything using Wi-Fi should make it easy to set up security. Bonus points for doing it in under $85 shipped at Amazon (I'm hoping to pay for this via $85 worth of Amazon gift cards). I know this a pretty tight budget, so just getting close is okay. Bonus points for something that remembers multiple profiles (keep my favorite songs separate from the wife's). Bonus points for a remote that can also replace my stereo remote, so I only need one device to control everything. I'm not holding my breath on this one given my price range, though. Bonus points if I can also use for Internet radio. Doing some research on my own as well. This looks like it'll do exactly what I want, but it lists at an outrageous $299: http://www.linksysbycisco.com/US/en/products/DMP100

  Read the article

• How to Reinstalling MSSQL Server 2008 with SP1? (Windows 7)

  - by n10i

  I am using Windows 7 Ultimate x64. I had earlier installed SQL server 2008 with SP1 with Visual Studio 2008 Team System with sp1. Now that VS2010 is out I wanted to install it so I uninstalled visual studio then MSSLQ Server 2008 SP1 and then SQL Server 2008 as suggested here: h**p://mark.michaelis.net/Blog/SQLServer2008InstallNightmare.aspx But now when I try to reinstall it I am unable to get it right I am getting the ERROR: “Attempted to perform an unauthorized operation.” (Following is part of the log file): 2010-04-16 04:54:57 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;CI;KR;;;S-1-5-21-2213424280-2581054173-1939225444-1027) 2010-04-16 04:54:57 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: D:(A;CI;KR;;;S-1-5-21-2213424280-2581054173-1939225444-1027) 2010-04-16 04:54:57 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;CI;KR;;;S-1-5-21-2213424280-2581054173-1939225444-1027) 2010-04-16 04:54:57 Slp: Prompting user if they want to retry this action due to the following failure: 2010-04-16 04:54:57 Slp: ---------------------------------------- 2010-04-16 04:54:57 Slp: The following is an exception stack listing the exceptions in outermost to innermost order 2010-04-16 04:54:57 Slp: Inner exceptions are being indented 2010-04-16 04:54:57 Slp: 2010-04-16 04:54:57 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException 2010-04-16 04:54:57 Slp: Message: 2010-04-16 04:54:57 Slp: Attempted to perform an unauthorized operation. 2010-04-16 04:54:57 Slp: Data: 2010-04-16 04:54:57 Slp: WatsonData = Microsoft SQL Server 2010-04-16 04:54:57 Slp: DisableRetry = true 2010-04-16 04:54:57 Slp: Inner exception type: System.UnauthorizedAccessException 2010-04-16 04:54:57 Slp: Message: 2010-04-16 04:54:57 Slp: Attempted to perform an unauthorized operation. 2010-04-16 04:54:57 Slp: Stack: 2010-04-16 04:54:57 Slp: at System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd) 2010-04-16 04:54:57 Slp: at System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext) 2010-04-16 04:54:57 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections) 2010-04-16 04:54:57 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key) 2010-04-16 04:54:57 Slp: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite) 2010-04-16 04:54:57 Slp: ---------------------------------------- 2010-04-16 10:37:19 Slp: User has chosen to cancel this action 2010-04-16 10:37:19 Slp: Watson Bucket 2 Original Parameter Values 2010-04-16 10:37:19 Slp: Parameter 0 : SQL2008@RTM@ 2010-04-16 10:37:19 Slp: Parameter 2 : System.Security.AccessControl.Win32.GetSecurityInfo 2010-04-16 10:37:19 Slp: Parameter 3 : Microsoft.SqlServer.Configuration.Sco.ScoException@1211@1 2010-04-16 10:37:19 Slp: Parameter 4 : System.UnauthorizedAccessException@-2147024891 2010-04-16 10:37:19 Slp: Parameter 5 : SqlBrowserConfigAction_install_ConfigNonRC 2010-04-16 10:37:19 Slp: Parameter 7 : Microsoft SQL Server 2010-04-16 10:37:19 Slp: Parameter 8 : Microsoft SQL Server 2010-04-16 10:37:19 Slp: Final Parameter Values I have googled around for the error given error but all I could find is to regedit and reset permissions on certain reg keys but I don’t see any reg keys with access problem in the log file the log file can be download here: http://www.mediafire.com/?dznizytjznn. Please guys help me out here I am a developer and I cannot afford an OS reinstallation! Thanks in advance…

  Read the article

• dmidecode showing more ram slots than available?

  - by Jestep

  I have some failing RAM in a server and I ran dmidecode to figure out what tyoe of RAM I needed to replace it with. The server has 6 RAM slots, 4 of which are in use. When I run dmidecode this is what I get. dmidecode 2.10 SMBIOS 2.4 present. Handle 0x001F, DMI type 17, 27 bytes Memory Device Array Handle: 0x001E Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: JXXX Bank Locator: DIMM 00 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0020, DMI type 17, 27 bytes Memory Device Array Handle: 0x001E Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: JXXX Bank Locator: DIMM 01 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0021, DMI type 17, 27 bytes Memory Device Array Handle: 0x001E Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: 1 Locator: JXXX Bank Locator: DIMM 02 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0022, DMI type 17, 27 bytes Memory Device Array Handle: 0x001E Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: 1 Locator: JXXX Bank Locator: DIMM 03 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0023, DMI type 17, 27 bytes Memory Device Array Handle: 0x001E Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: JXXX Bank Locator: DIMM 10 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0024, DMI type 17, 27 bytes Memory Device Array Handle: 0x001E Error Information Handle: No Error Total Width: 72 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: JXXX Bank Locator: DIMM 11 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0025, DMI type 17, 27 bytes Memory Device Array Handle: 0x001E Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: 1 Locator: JXXX Bank Locator: DIMM 12 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0026, DMI type 17, 27 bytes Memory Device Array Handle: 0x001E Error Information Handle: No Error Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: 1 Locator: JXXX Bank Locator: DIMM 13 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Does anyone know why it would show 8 slots, with 4 empty instead of 6 slots with 2 empty? Also, but my records and by other tools, the server has 16Gb and not 8Gb in it currently. grep MemTotal /proc/meminfo MemTotal: 16435808 kB The board is a Tyan S5372-LC, running CentOS 5.4 x64. Also, my error log is showing errors in bank 6. Is there any way to determine which slot bank 6 is in via: dmidecode?

  Read the article

• Brand new Mac Pro tower fan suddenly runs full-tilt

  - by Caffeine Coma

  My Quad-Core Mac Pro tower is two days old. Initially, I was impressed with how quiet it was compared to my older Macbook Pro. Then on day two, for some reason it started running very loudly. It's not just a "little" loud- my wife walked into the room and asked what the noise was. At first I thought this was just because I was hitting the CPU a bit (importing my iPhone library into iLife '09, and running Eclipse). But now that that's done, Activity Monitor shows a virtually idle CPU; there's nothing running that ought to be causing this, as far as I can tell. I tried powering it off & letting it cool down for a few minutes to no avail; about 10 seconds after powering up, the box gets loud again. I took a look at it with the side cover off, and it seems to be the fan near the top middle, between the power supply and the disk drive. It can't be a dust issue, as the machine is only 2 days old (and I peeked inside anyway just to be sure- clean). I did do a software update over the past 24 hours or so, but I can't say that it occurred immediately after that. I also did a migration of my old apps and data from my MBPro, for what it's worth. Why is it suddenly so loud? How can I monitor the fan speed and various system temperatures? Here's a link to my temps and fan speeds. UPDATE 1: Took it to the Apple Store. They took it in the back (where it's presumably quieter) and ran a fan diagnostic; no problems were found. The guy also told me that it was "a little loud", but normal. I don't buy it. It was virtually silent the first 24 hours I was using it. They would not replace/service it in the store (grrr... that's why I went there, as directed by Apple Care) but said I could get a replacement from the online store, as it was just purchased. I think I will try that. UPDATE 2: Apple is letting me send it back for a replacement. Glad to see so many responses to this question mentioning that the MacPros are usually silent; it's not all just in my head. :-)

  Read the article

• How can I force a merge of all WAL files in pg_xlog back into my base "data" directory?

  - by Zac B

  Question: Is there a way to tell Postgres (9.2) to "merge all WAL files in pg_xlog back into the non-WAL data files, and then delete all WAL files successfully merged?" I would like to be able to "force" this operation; i.e. checkpoint_segments or archiving settings should be ignored. The filesystem WAL buffer (pg_xlog) directory should be emptied, or nearly emptied. It's fine if some or all of the space consumed by the pg_xlog directory is then consumed by the data directory; our DBA has asked for WAL database backups without any backlogged WALs, but space consumption is not a concern. Having near-zero WAL activity during this operation is a fine constraint. I can ensure that the database server is either shut down or not connectible (zero user-generated transaction load) during this process. Essentially, I'd like Postgres to ignore archiving/checkpoint retention policies temporarily, and flush all WAL activity to the core database files, leaving pg_xlog in the same state as if the database were recently created--with very few WAL files. What I've Tried: I know that the pg_basebackup utility performs something like this (it generates an almost-all-WALs-merged copy of a Postgres instance's data directory), but we aren't ready to use it on all our systems yet, as we are still testing replication settings; I'm hoping for a more short-term solution. I've tried issuing CHECKPOINT commands, but they just recycle one WAL file and replace it with another (that is, if they do anything at all; if I issue them during database idle time, they do nothing). pg_switch_xlog() similarly just forces a switch to the next log segment; it doesn't flush all queued/buffered segments. I've also played with the pg_resetxlog utility. That utility sort of does what I want, but all of its usage docs seem to indicate that it destroys (rather than flushing out of the transaction log and into the main data files) some or all of the WAL data. Is that impression accurate? If not, can I use pg_resetxlog during a zero-WAL-activity period to force a flush of all queued WAL data to non-WAL data? If the answer to that is negative, how can I achieve this goal? Thanks!

  Read the article

• Planning trunk capacity for multiple GbE switches

  - by wuckachucka

  Without measuring throughput (it's at the top of the list; this is just theoretical), I want to know the most standard method for trunking VLANs on multiple Gigabit (GbE) switches to a core Layer 3 GbE switch. Say you have three VLANs: VLAN10 (10.0.0.0/24) Servers: your typical Windows DC/file server, Exchange, and an Accounting/SQL server. VLAN20: (10.0.1.0/24) Sales: needs access to everything on VLAN10; doesn't need access to VLAN30 and vice-versa. VLAN20: (10.0.1.0/24) Support: needs access to everything on VLAN10; doesn't need access to VLAN20 and vice-versa. Here's how I think this should work in my head: Switch #1: Ports 2-20 are assigned to VLAN20; all the Sales workstations and printers are connected here. Optional 10GbE combo port #1 is trunked to L3 switch's 10 GbE combo port #1. Switch #2: Ports 2-20 are assigned to VLAN30; all the Support workstations and printers are connected here. Optional 10GbE combo port #1 is trunked to L3 switch's 10 GbE combo port #2. Core L3 switch: Ports 2-10 are assigned to VLAN10; all three servers are connected here. With a standard 10/100 x 24 switch, it'll usually come with one or two 1 GbE uplink ports; carrying over this logic to a 10/100/1000 x 24, the "optional" 10 GbE combo ports that most higher-end switches can get shouldn't really be an option. Keep in mind I haven't tested anything yet, I'm primarily moving in this direction for growth (don't want to buy 10/100 switches and have to replace those within a couple of years) and security (being able to control access between VLANs with L3 routing/packet filtering ACLs). Does this sound right? Do I really need the 10 GbE ports? It seems very non-standard and expensive, but it "feels" right when you think about 40 or 50 workstations trunking up to the L3 switch over 1 GbE standard ports. If say 20 workstations want to download a 10 GB image from the servers concurrently, wouldn't the trunk be the bottleneck? At least if the trunk was 10 GbE, you'd have 10x1GbE nodes being able to reach their theoretical max. What about switch stacking? Some of the D-Links I've been looking at have HDMI interfaces for stacking. As far as I know, stacking two switches creates one logical switch, but is this just for management I/O or does the switches use the (assuming it's HDMI 1.3) 10.2 Gbps for carrying data back and forth?

  Read the article

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >