preg replace - Page 269

Why can't we reach some (but not all) external web service via VPN connection?

- by Paul Haldane

At work (UK university) we use a set of Windows servers running WS2008R2 and RRAS which offer VPN service to students in our accommodation. We do this to associate the network connections with individuals. Before they've connected to the VPN all they can talk to is the stuff thats needed to setup the VPN and a local web site with documentation on how to connect. Medium term we'll probably replace this but it's what we're using at the moment. VPN on the 2008 servers allocates client a private (10.x) address. Access to external sites is through NAT on the campus routers (same as any other directly connected client on a private address). Non-VPN connections aren't seeing this problem. Older servers run WS 2003 and ISA2004. That setup works but has become unreliable under load. Big difference there was that we were allocating non-RFC1918 addresses to the clients (so no NAT required). Behaviour we're seeing is that once connected to the VPN, clients can reach local web sites (that is sites on the campus network) but only some external sites. It seems (but this may be chance) that the sites we can reach are Google ones (including YouTube). We certainly have trouble reaching Microsoft's Office 365 service (which is a pain because that's where mail for most of our students is). One odd bit of behaviour is that clients can fetch (using wget on a Windows 7 client) http://www.oracle.com/ (which gets a 301 redirect) but hangs when asked to fetch http://www.oracle.com/index.html (which is what the first URL redirects to). Access works reliably if we configure clients to use our local web proxies (Squid). My gut tells me that this is likely to be something in the chain dropping replies either based on HTTP inspection or the IP address in the reply. However I'm puzzled about why we're seeing this with the VPN clients. Plan for tomorrow (when I'm back in the office) is to setup a web server on external connection so that we can monitor behaviour at both ends of the conversation (hoping that the problem manifests itself with our test server). Any suggestions for things we should be looking at?

Read the article

TrueCrypt partition will no longer mount

- by sparkyuiop

I am hoping for some advice to help me out of my situation, with luck. I have a computer running Windows 7 Ultimate x64 with 3 hard disks installed. On my 2TB hard disk 2 (non-system disk) I have 4 partitions. One is for music, another for video, a downloads partition and a 500GB RAW Truecrypt encrypted partition / volume that I had setup to mount with 4 photographs used as keyfiles. The 4 photographs are located in my 'Documents' partition which is one of four partitions on my 1.5TB hard disk 1 (non-system disk) When I setup the disk encryption I did not (I'm 99% sure) create a password, I only used the 4 photograph keyfiles to mount the volume. Recently my 1TB hard disk 0 (system / boot) started to fail so I decided to replace it. I was going to clone the old disk to a new disk but decided that a fresh installation would be more beneficial. Once I had transferred all the required 'User Data' from my old hard disk 0 (C: disk) I discarded it. I reinstalled Truecrypt, pointed to the partition, selected my 4 keyfiles photographs and I mounted my encrypted volume with no issues. In fact I mounted it several times after re-installing Windows and after reboots. Now all of a sudden when I try and mount it I get the message "incorrect keyfile(s) and/or password or not a Truecrypt volume". Now I am not sure why this happened as I do not recall exactly what I did between last mounting the volume successfully and it not mounting. Here are some of the possible things I may have done to cause it to stop working but I am at a loss as to where to start to try and resolve the problem. 1. I had swapped the drive letters to a preferred order. 2. I possibly swapped the physical SATA connectors on the mainboard. 3. I enabled 'Hot Plugging' for the two non-system hard disk SATA ports and the DVD SATA port in the BIOS. I have tried changing the encrypted partition drive letter as suggested in another post but this does not help. On my old system the encrypted drive was drive "X". I have about tried it with all the other free drive letters but alas nothing changes. I do not recall what drive letter was allocated to the encrypted partition before I changed them all. I have not tried to change the letter back to what it possibly was to start with as I am happy with the current layout. I will try this is anyone thinks it would be worthwhile though. I do hope I have managed to convey my situation in an understandable manner and live in hope someone could help me recover years of personal files. Thank you very much for taking the time to read my post and for any suggestions you may offer. Regards Phillip Thorne (UK) Anyone???

Read the article

FTP script needs blank line

- by Ones and Zeroes

I am trying to determine the reason for some FTP servers requiring a blank line in the script as follows: open server.com username ftp_commands bye Refer to blank line required after username credentials. Example from: FTP from batch file another reference to the same: http://newsgroups.derkeiler.com/Archive/Comp/comp.sys.ibm.as400.misc/2008-05/msg00227.html Also discussed here: archive.midrange.com/midrange-l/200601/msg00048.html "The behavior I'm observing is the same as if I didn't specify the password to login." with an answer referring to our same fix... archive.midrange.com/midrange-l/200601/msg00053.html and archive.midrange.com/midrange-l/200601/msg00065.html Note: It is my experience that FTP questions attract uncouth responses. Admittedly FTP is outdated, but many clients still have legacy systems, which they cannot upgrade or replace. The reason thereof should not be discussed here. The intention of this question is to invite a positive response. Please do not respond if you disagree with the above. If you have never encountered this same issue, please do not respond. I suspect this may be limited to FTP scripts executed from Windows machines, but have been told that this happens often and with many different servers. My specific interest is to understand what may cause this as I have a real world example of a production system suddenly requiring this as a workaround fix, after running for many years without issue. The server belongs to a third party who claims no change on their end. Server details unknown and cannot be determined. Any help or encouragement from someone who has come across the same, would be appreciated. ps. Sorry for the many words and references to painful responses, but I have asked similar questions on serverfault and elsewhere and unfortunately got back kneejerk responses to FTP and respondents debating the validity of the question. I would truly not ask, or re-post this question online if I had a better understanding of the issue. I know of people who have seen this issue, but don't know what causes it. I am wary that this question would again turn into another irrelevant discussion. Please, I ask very nicely: Please do not respond if you have not encountered a similar issue. FURTHER EDIT: Please do not suggest changing the product. The problem is not the blank line requirement. We know this fixes the issue. The problem is not being able to explain the reason for the blank line in the first place. Slight difference, but a critical point to note wrt the answering of this question.

Read the article

How To Switch Back to Outlook 2007 After the 2010 Beta Ends

- by Matthew Guay

Are you switching back to Outlook 2007 after trying out Office 2010 beta? Here’s how you can restore your Outlook data and keep everything working fine after the switch. Whenever you install a newer version of Outlook, it will convert your profile and data files to the latest format. This makes them work the best in the newer version of Outlook, but may cause problems if you decide to revert to an older version. If you installed Outlook 2010 beta, it automatically imported and converted your profile from Outlook 2007. When the beta expires, you will either have to reinstall Office 2007 or purchase a copy of Office 2010. If you choose to reinstall Office 2007, you may notice an error message each time you open Outlook. Outlook will still work fine and all of your data will be saved, but this error message can get annoying. Here’s how you can create a new profile, import all of your old data, and get rid of this error message. Banish the Error Message with a New Profile To get rid of this error message, we need to create a new Outlook profile. First, make sure your Outlook data files are backed up. Your messages, contacts, calendar, and more are stored in a .pst file in your appdata folder. Enter the following in the address bar of an Explorer window to open your Outlook data folder, and replace username with your user name: C:\Users\username\AppData\Local\Microsoft\Outlook Copy the Outlook Personal Folders (.pst) files that contain your data. Its name is usually your email address, though it may have a different name. If in doubt, select all of the Outlook Personal Folders files, copy them, and save them in another safe place (such as your Documents folder). Now, let’s remove your old profile. Open Control Panel, and select Mail. In Windows Vista or 7, simply enter “Mail” in the search box and select the first entry. Click the “Show Profiles…” button. Now, select your Outlook profile, and click Remove. This will not delete your data files, but will remove them from Outlook. Press Yes to confirm that you wish to remove this profile. Open Outlook, and you will be asked to create a new profile. Enter a name for your new profile, and press Ok. Now enter your email account information to setup Outlook as normal. Outlook will attempt to automatically configure your account settings. This usually works for accounts with popular email systems, but if it fails to find your information you can enter it manually. Press finish when everything’s done. Outlook will now go ahead and download messages from your email account. In our test, we used a Gmail account that still had all of our old messages online. Those files are backed up in our old Outlook data files, so we can save time and not download them. Click the Send/Receive button on the bottom of the window, and select “Cancel Send/Receive”. Restore Your Old Outlook Data Let’s add our old Outlook file back to Outlook 2007. Exit Outlook, and then go back to Control Panel, and select Mail as above. This time, click the Data Files button. Click the Add button on the top left. Select “Office Outlook Personal Folders File (.pst)”, and click Ok. Now, select your old Outlook data file. It should be in the folder that opens by default; if not, browse to the backup copy we saved earlier, and select it. Press Ok at the next dialog to accept the default settings. Now, select the data file we just imported, and click “Set as Default”. Now, all of your old messages, appointments, contacts, and everything else will be right in Outlook ready for you. Click Ok, and then open Outlook to see the change. All of the data that was in Outlook 2010 is now ready to use in Outlook 2007. You won’t have to wait to re-download all of your emails from the server since everything’s still here ready to be used. And when you open Outlook, you won’t see any error messages, either! Conclusion Migrating your Outlook profile back to Outlook 2007 is fairly easy, and with these steps, you can avoid seeing an error message every time you open Outlook. With all your data in tact, you’re ready to get back to work instead of getting frustrated with Outlook. Many of us use webmail and keep all of our messages in the cloud, but even on broadband connections it can take a long time to download several gigabytes of emails. Similar Articles Productive Geek Tips Opening Attachments in Outlook 2007 by KeyboardQuickly Create Appointments from Tasks with Outlook 2007’s To-Do BarFix For Outlook 2007 Constantly Asking for Password on VistaPin Microsoft Outlook to the Desktop BackgroundOur Look at the LinkedIn Social Connector for Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook

Read the article

May 20th Links: ASP.NET MVC, ASP.NET, .NET 4, VS 2010, Silverlight

- by ScottGu

Here is the latest in my link-listing series. Also check out my VS 2010 and .NET 4 series and ASP.NET MVC 2 series for other on-going blog series I’m working on. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET MVC How to Localize an ASP.NET MVC Application: Michael Ceranski has a good blog post that describes how to localize ASP.NET MVC 2 applications. ASP.NET MVC with jTemplates Part 1 and Part 2: Steve Gentile has a nice two-part set of blog posts that demonstrate how to use the jTemplate and DataTable jQuery libraries to implement client-side data binding with ASP.NET MVC. CascadingDropDown jQuery Plugin for ASP.NET MVC: Raj Kaimal has a nice blog post that demonstrates how to implement a dynamically constructed cascading dropdownlist on the client using jQuery and ASP.NET MVC. How to Configure VS 2010 Code Coverage for ASP.NET MVC Unit Tests: Visual Studio enables you to calculate the “code coverage” of your unit tests. This measures the percentage of code within your application that is exercised by your tests – and can give you a sense of how much test coverage you have. Gunnar Peipman demonstrates how to configure this for ASP.NET MVC projects. Shrinkr URL Shortening Service Sample: A nice open source application and code sample built by Kazi Manzur that demonstrates how to implement a URL Shortening Services (like bit.ly) using ASP.NET MVC 2 and EF4. More details here. Creating RSS Feeds in ASP.NET MVC: Damien Guard has a nice post that describes a cool new “FeedResult” class he created that makes it easy to publish and expose RSS feeds from within ASP.NET MVC sites. NoSQL with MongoDB, NoRM and ASP.NET MVC Part 1 and Part 2: Nice two-part blog series by Shiju Varghese on how to use MongoDB (a document database) with ASP.NET MVC. If you are interested in document databases also make sure to check out the Raven DB project from Ayende. Using the FCKEditor with ASP.NET MVC: Quick blog post that describes how to use FCKEditor – an open source HTML Text Editor – with ASP.NET MVC. ASP.NET Replace Html.Encode Calls with the New HTML Encoding Syntax: Phil Haack has a good blog post that describes a useful way to quickly update your ASP.NET pages and ASP.NET MVC views to use the new <%: %> encoding syntax in ASP.NET 4. I blogged about the new <%: %> syntax – it provides an easy and concise way to HTML encode content. Integrating Twitter into an ASP.NET Website using OAuth: Scott Mitchell has a nice article that describes how to take advantage of Twiter within an ASP.NET Website using the OAuth protocol – which is a simple, secure protocol for granting API access. Creating an ASP.NET report using VS 2010 Part 1, Part 2, and Part 3: Raj Kaimal has a nice three part set of blog posts that detail how to use SQL Server Reporting Services, ASP.NET 4 and VS 2010 to create a dynamic reporting solution. Three Hidden Extensibility Gems in ASP.NET 4: Phil Haack blogs about three obscure but useful extensibility points enabled with ASP.NET 4. .NET 4 Entity Framework 4 Video Series: Julie Lerman has a nice, free, 7-part video series on MSDN that walks through how to use the new EF4 capabilities with VS 2010 and .NET 4. I’ll be covering EF4 in a blog series that I’m going to start shortly as well. Getting Lazy with System.Lazy: System.Lazy and System.Lazy<T> are new features in .NET 4 that provide a way to create objects that may need to perform time consuming operations and defer the execution of the operation until it is needed. Derik Whittaker has a nice write-up that describes how to use it. LINQ to Twitter: Nifty open source library on Codeplex that enables you to use LINQ syntax to query Twitter. Visual Studio 2010 Using Intellitrace in VS 2010: Chris Koenig has a nice 10 minute video that demonstrates how to use the new Intellitrace features of VS 2010 to enable DVR playback of your debug sessions. Make the VS 2010 IDE Colors look like VS 2008: Scott Hanselman has a nice blog post that covers the Visual Studio Color Theme Editor extension – which allows you to customize the VS 2010 IDE however you want. How to understand your code using Dependency Graphs, Sequence Diagrams, and the Architecture Explorer: Jennifer Marsman has a nice blog post describes how to take advantage of some of the new architecture features within VS 2010 to quickly analyze applications and legacy code-bases. How to maintain control of your code using Layer Diagrams: Another great blog post by Jennifer Marsman that demonstrates how to setup a “layer diagram” within VS 2010 to enforce clean layering within your applications. This enables you to enforce a compiler error if someone inadvertently violates a layer design rule. Collapse Selection in Solution Explorer Extension: Useful VS 2010 extension that enables you to quickly collapse “child nodes” within the Visual Studio Solution Explorer. If you have deeply nested project structures this extension is useful. Silverlight and Windows Phone 7 Building a Simple Windows Phone 7 Application: A nice tutorial blog post that demonstrates how to take advantage of Expression Blend to create an animated Windows Phone 7 application. If you haven’t checked out my Windows Phone 7 Twitter Tutorial I also recommend reading that. Hope this helps, Scott P.S. If you haven’t already, check out this month’s "Find a Hoster” page on the www.asp.net website to learn about great (and very inexpensive) ASP.NET hosting offers.

Read the article

Our Look at the Internet Explorer 9 Platform Preview

- by Asian Angel

Have you been hearing all about Microsoft’s work on Internet Explorer 9 and are curious about it? If you are wanting a taste of the upcoming release then join us as we take a look at the Internet Explorer 9 Platform Preview. Note: Windows Vista and Server 2008 users may need to install a Platform Update (see link at bottom for more information). Getting Started If you are curious about the systems that the platform preview will operate on here is an excerpt from the FAQ page (link provided below). There are two important points of interest here: The platform preview does not replace your regular Internet Explorer installation The platform preview (and the final version of Internet Explorer 9) will not work on Windows XP There really is not a lot to the install process…basically all that you will have to deal with is the “EULA Window” and the “Install Finished Window”. Note: The platform preview will install to a “Program Files Folder” named “Internet Explorer Platform Preview”. Internet Explorer 9 Platform Preview in Action When you start the platform preview up for the first time you will be presented with the Internet Explorer 9 Test Drive homepage. Do not be surprised that there is not a lot to the UI at this time…but you can get a good idea of how Internet Explorer will act. Note: You will not be able to alter the “Homepage” for the platform preview. Of the four menus available there are two that will be of interest to most people…the “Page & Debug Menus”. If you go to navigate to a new webpage you will need to go through the “Page Menu” unless you have installed the Address Bar Mini-Tool (shown below). Want to see what a webpage will look like in an older version of Internet Explorer? Then choose your version in the “Debug Menu”. We did find it humorous that IE6 was excluded from the choices offered. Here is what the URL entry window looks like if you are using the “Page Menu” to navigate between websites. Here is the main page of the site here displayed in “IE9 Mode”…looking good. Here is the main page viewed in “Forced IE5 Document Mode”. There were some minor differences (colors, sidebar, etc.) in how the main page displayed in comparison to “IE9 Mode”. Being able to switch between modes makes for an interesting experience… As you can see there is not much to the “Context Menu” at the moment. Notice the slightly altered icon for the platform preview… “Add” an Address Bar of Sorts If you would like to use a “make-shift” Address Bar with the platform preview you can set up the portable file (IE9browser.exe) for the Internet Explorer 9 Test Platform Addressbar Mini-Tool. Just place it in an appropriate folder, create a shortcut for it, and it will be ready to go. Here is a close look at the left side of the Address Bar Mini-Tool. You can try to access “IE Favorites” but may have sporadic results like those we experienced during our tests. Note: The Address Bar Mini-Tool will not line up perfectly with the platform preview but still makes a nice addition. And a close look at the right side of the Address Bar Mini-Tool. In order to completely shut down the Address Bar Mini-Tool you will need to click on “Close”. Each time that you enter an address into the Address Bar Mini-Tool it will open a new window/instance of the platform preview. Note: During our tests we noticed that clicking on “Home” in the “Page Menu” opened the previously viewed website but once we closed and restarted the platform preview the test drive website was the starting/home page again. Even if the platform preview is not running the Address Bar Mini-Tool can still run as shown here. Note: You will not be able to move the Address Bar Mini-Tool from its’ locked-in position at the top of the screen. Now for some fun. With just the Address Bar Mini-Tool open you can enter an address and cause the platform preview to open. Here is our example from above now open in the platform preview…good to go. Conclusion During our tests we did experience the occasional crash but overall we were pleased with the platform preview’s performance. The platform preview handled rather well and definitely seemed much quicker than Internet Explorer 8 on our test system (a definite bonus!). If you are an early adopter then this could certainly get you in the mood for the upcoming beta releases! Links Download the Internet Explorer 9 Preview Platform Download the Internet Explorer 9 Test Platform Addressbar Mini-Tool Information about Platform Update for Windows Vista & Server 2008 View the Internet Explorer 9 Platform Preview FAQ Similar Articles Productive Geek Tips Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPMake Ctrl+Tab in Internet Explorer 7 Use Most Recent OrderRemove ISP Text or Corporate Branding from Internet Explorer Title BarWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer?Prevent Firefox or Internet Explorer from Printing the URL on Every Page TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses

Read the article

[Windows 8] Update TextBox’s binding on TextChanged

- by Benjamin Roux

Since UpdateSourceTrigger is not available in WinRT we cannot update the text’s binding of a TextBox at will (or at least not easily) especially when using MVVM (I surely don’t want to write behind-code to do that in each of my apps !). Since this kind of demand is frequent (for example to disable of button if the TextBox is empty) I decided to create some attached properties to to simulate this missing behavior. namespace Indeed.Controls { public static class TextBoxEx { public static string GetRealTimeText(TextBox obj) { return (string)obj.GetValue(RealTimeTextProperty); } public static void SetRealTimeText(TextBox obj, string value) { obj.SetValue(RealTimeTextProperty, value); } public static readonly DependencyProperty RealTimeTextProperty = DependencyProperty.RegisterAttached("RealTimeText", typeof(string), typeof(TextBoxEx), null); public static bool GetIsAutoUpdate(TextBox obj) { return (bool)obj.GetValue(IsAutoUpdateProperty); } public static void SetIsAutoUpdate(TextBox obj, bool value) { obj.SetValue(IsAutoUpdateProperty, value); } public static readonly DependencyProperty IsAutoUpdateProperty = DependencyProperty.RegisterAttached("IsAutoUpdate", typeof(bool), typeof(TextBoxEx), new PropertyMetadata(false, OnIsAutoUpdateChanged)); private static void OnIsAutoUpdateChanged(DependencyObject sender, DependencyPropertyChangedEventArgs e) { var value = (bool)e.NewValue; var textbox = (TextBox)sender; if (value) { Observable.FromEventPattern<TextChangedEventHandler, TextChangedEventArgs>( o => textbox.TextChanged += o, o => textbox.TextChanged -= o) .Do(_ => textbox.SetValue(TextBoxEx.RealTimeTextProperty, textbox.Text)) .Subscribe(); } } } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The code is composed of two attached properties. The first one “RealTimeText” reflects the text in real time (updated after each TextChanged event). The second one is only used to enable the functionality. To subscribe to the TextChanged event I used Reactive Extensions (Rx-Metro package in Nuget). If you’re not familiar with this framework just replace the code with a simple: textbox.TextChanged += textbox.SetValue(TextBoxEx.RealTimeTextProperty, textbox.Text); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } To use these attached properties, it’s fairly simple <TextBox Text="{Binding Path=MyProperty, Mode=TwoWay}" ic:TextBoxEx.IsAutoUpdate="True" ic:TextBoxEx.RealTimeText="{Binding Path=MyProperty, Mode=TwoWay}" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Just make sure to create a binding (in TwoWay) for both Text and RealTimeText. Hope this helps !

Read the article

Convert Excel File 'xls' to CSV, CAUTION: Bumps Ahead

- by faizanahmad

The task was to provide users with an interface where they can upload the 'csv' files, these files were to be processed and loaded to Database by a Console application. The code in Console application could not handle the 'xls' files so we thought, OK, lets convert 'xls' to 'csv' in the code, Seemed like fun. The idea was to convert it right after uploading within 'csv' file. As Microsoft does not recommend using the Excel objects in ASP.NET, we decided to use the Jet engine to open xls. (Ace driver is used for xlsx) The code was pretty straight, can be found on following links: http://www.c-sharpcorner.com/uploadfile/yuanwang200409/102242008174401pm/1.aspx http://www.devasp.net/net/articles/display/141.html FIRST BUMP 'OleDbException (0x80004005): Unspecified error' ( Impersonation ): The ablove code ran fine in my test web site and test console application, but it gave an 'OleDbException (0x80004005): Unspecified error' in main web site, turns out imperonation was set to True and as soon as I changed it to False, it did work. on My XP box, web site was running under user 'ASPNET' with imperosnation set to FALSE 'IUSR_*' i.e IIS guest user with impersonation set to TRUE The weired part was that both users had same rights on the folders I was saving files to and on Excel app in DCOM Config. We decided to give it a try on Windows Server 2003 with web site set to windows authentication ( impersonation = true ) and yes it did work. SECOND BUMP 'External table not in correct format': I got this error with some files and it appeared that the file from client has some metadata issues ( when I opened the file in Excel and try to save it ,excel would give me this error saying File can not be saved in current format ) and the error was caused by that. Some people were able to reslove the error by using "Extended Properties=HTML Import;" in connection string. But it did not work for me. We decided to detour from here and use Excel object :( as we had no control on client setting the meta deta of Excel files. Before third bump there were a ouple of small thingies like 'Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 80070005' Fix can be found at http://blog.crowe.co.nz/archive/2006/03/02/589.aspx THIRD BUMP ( Could not get rid of the EXCEL process ): I has all the code in place to 'Quiet' the excel, but, it just did not work. work around was done to Kill the process as we knew no other application on server was using EXCEL. The normal steps to quite the excel application worked just fine in console application though. FOURTH BUMP: Code worked with one file 1 on my machine and with the other file 2 code will break. and the same code will work perfectly fine with file 2 on some other machine . We moved it to QA ( Windows Server 2003 )and worked with every file just perfect. But , then there was another problem: one user can upload it and second cant, permissions on folder and DCOM Conifg checked. Another Detour: Uplooad the xls as it is and convert in Console application. Lesson Learnt: If its 'xlsx' use 'ACE Driver' or read xml within excel as recommneded by MS. If xls and you know its always going to be properly formatted 'jet Engine' Code: Imports Microsoft.Office.Interop Private Function ConvertFile(ByVal SourceFolder As String, ByVal FileName As String, ByVal FileExtension As String)As Boolean Dim appExcel As New Excel.Application Dim workBooks As Excel.Workbooks = appExcel.Workbooks Dim objWorkbook As Excel.Workbook Try objWorkbook = workBooks.Open(CompleteFilePath ) objWorkbook.SaveAs(Filename:=CObj(SourceFolder & FileName & ".csv"), FileFormat:=Excel.XlFileFormat.xlCSV) Catch ex As Exception GenerateAlert(ex.Message().Replace("'", "") & " Error Converting File to CSV.") LogError(ex ) Return False Finally If Not(objWorkbook is Nothing) then objWorkbook.Close(SaveChanges:=CObj(False)) End If ReleaseObj(objWorkbook) ReleaseObj(workBooks) appExcel.Quit() ReleaseObj(appExcel) Dim proc As System.Diagnostics.Process For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL") proc.Kill() Next DeleteSourceFile(SourceFolder & FileName & FileExtension) End Try Return True End Function Private Sub ReleaseObj(ByVal o As Object) Try System.Runtime.InteropServices.Marshal.ReleaseComObject(o) Catch ex As Exception LogError(ex ) Finally o = Nothing End Try End Sub Protected Sub DeleteSourceFile(Byval CompleteFilePath As string) Try Dim MyFile As FileInfo = New FileInfo(CompleteFilePath) If MyFile.Exists Then File.Delete(CompleteFilePath) Else Throw New FileNotFoundException() End If Catch ex As Exception GenerateAlert( " Source File could not be deleted.") LogError(ex) End Try End Sub The code to kill the process ( Avoid it if you can ): Dim proc As System.Diagnostics.Process For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL") proc.Kill() Next

Read the article

Silverlight 5 Hosting :: Features in Silverlight 5 and Release Date

- by mbridge

Silverlight 5 is finally announced in the Silverlight FireStarter Event on the 2nd December, 2010. This new version of Silverlight which was earlier labeled as 'Future of Microsoft Silverlight' has now come much closer to go live as the first Silverlight 5 Beta version is expected to be shipped during the early months of 2011. However for the full fledged and the final release of Silverlight 5, we have to wait many more months as the same is likely to be made available within the Q3 2011. As would have been usually expected, this latest edition would feature many new capabilities thereby extending the developer productivity to a whole new dimension of premium media experience and feature-rich business applications. It comes along with many new feature updates as well as the inclusion of new technologies to improve the standard of the Silverlight applications which are now fine-tuned to produce next generation business and media solutions that is capable to meet the requirements of the advanced web-based app development. The Silverlight 5 is all set to replace the previous fourth version which now includes more than forty new features while also dropping various deprecated elements that was prevalent earlier. It has brought around some major performance enhancements and also included better support for various other tools and technologies. Following are some of the changes that are registered to be available under the Silverlight 5 Beta edition which is scheduled to be launched during the Q1 2011. Silverlight 5 : Premium Media Experiences The media features of Silverlight 5 has seen some major enhancements with a lot of optimizations being made to deliver richer solutions. It's capability has now been extended to make things easier, faster and capable of performing the desired tasks in the most efficient manner. The Silverlight media solutions has already been a part of many companies in the recent days where various on-demand Silverlight services were featured but with the arrival of the next generation premium media solution of Silverlight 5, it is expected to register new heights of success and global user acclamation for using it with many esteemed web-based projects and media solutions. - The most happening element in the new Silverlight 5 will be its support for utilizing the GPU based hardware acceleration which is intended to lower down the CPU load to a significant extent and thereby allowing faster rendering of media contents without consuming much resources. This feature is believed to be particularly helpful for low configured machines to run full HD media content without any lagging caused due to processor load. It will hence be one great feature to revolutionize the new generation high quality media contents to be available within the web in a more efficient manner with its hardware decoded video playback capabilities. - With the inclusion of hardware video decoding to minimize the processor load, the Silverlight 5 also comes with another optimization enhancement to also reduce the power consumption level by making new methods to deal with the power-saver settings. With this optimization in effect, the computer would be automatically allowed to switch to sleep mode while no video playback is in progress and also to prevent any screensavers to popup and cause annoyances during any video playback. There would also be other power saver options which will be made available to best suit the users requirements and purpose. - The Silverlight trickplay feature is another great way to tweak any silverlight powered media content as is used for many video tutorial sites or for dealing with any sort of presentations. This feature enables the user to modify the playback speed to either slowdown or speedup during the playback durations based on the requirements without compromising on the quality of output. Normally such manipulations always makes the content's audio to go off-pitch, but the same will not be the case with TrickPlay and the audio would seamlessly progress with the video without skipping any of its part. - In addition to all of the above, the new Silverlight 5 will be featuring wireless control of all the media contents by making use of remote controllers. With the use of such remote devices, it will be easier to handle the various media playback controls thereby providing more freedom while experiencing the premium media services. Silverlight 5 : Business Application Development The application development standard has been extended with more possibilities by bringing forth new and useful technologies and also reviving the existing methods to work better than what it was used to. From the UI improvements to advanced technical aspects, the Silverlight 5 scores high on all grounds to produce great next generation business delivered applications by putting in more creativity and resourceful touch to all the apps being produced with it. - The WPF feature of Silverlight is made more effective by introducing new standards of Databinding which is intended to improve the productivity standards of the Silverlight application developer. It brings in a lot of convenience in debugging the databinding components or expressions and hence making things work in a flawless manner. Some additional features related to databinding includes that of Ancestor RelativeSource, Implicit DataTemplates and Model View ViewModel (MVVM) support with DataContextChanged event and many other new features relating it. - It now comes with a refined text and printing service which facilitates better clarity of the text rendering and also many positive changes which are being applied to the layout pattern. New supports has been added to include OpenType font, multi-column text, linked-text containers and character leading support to name a few among the available features.This also includes some important printing aspects like that of Postscript Vector Printing API which allows to program our printing tasks in a user defined way and Pivot functionality for visualization concerns of informations. - The Graphics support is the key improvements being incorporated which now enables to utilize three dimensional graphics pattern using GPU acceleration. It can manage to provide some really cool visualizations being curved to provide media contents within the business apps with also the support for full HD contents at 1080p quality. - Silverlight 5 includes the support for 64-bit operating systems and relevant browsers and is also optimized to provide better performance. It can support the background thread for the networking which can reduce the latency of the network to a considerable extent. The Out-of-Browser functionality adds the support for utilizing various libraries and also the Win32 API. It also comes with testing support with VS 2010 which is mostly an automated procedure and has also enabled increased security aspects of all the Silverlight 5 developed applications by using the improved version of group policy support.

Read the article

Difference between LASTDATE and MAX for semi-additive measures in #DAX

- by Marco Russo (SQLBI)

I recently wrote an article on SQLBI about the semi-additive measures in DAX. I included the formulas common calculations and there is an interesting point that worth a longer digression: the difference between LASTDATE and MAX (which is similar to FIRSTDATE and MIN – I just describe the former, for the latter just replace the correspondent names). LASTDATE is a dax function that receives an argument that has to be a date column and returns the last date active in the current filter context. Apparently, it is the same value returned by MAX, which returns the maximum value of the argument in the current filter context. Of course, MAX can receive any numeric type (including date), whereas LASTDATE only accepts a column of type date. But overall, they seems identical in the result. However, the difference is a semantic one. In fact, this expression: LASTDATE ( 'Date'[Date] ) could be also rewritten as: FILTER ( VALUES ( 'Date'[Date] ), 'Date'[Date] = MAX ( 'Date'[Date] ) ) LASTDATE is a function that returns a table with a single column and one row, whereas MAX returns a scalar value. In DAX, any expression with one row and one column can be automatically converted into the corresponding scalar value of the single cell returned. The opposite is not true. So you can use LASTDATE in any expression where a table or a scalar is required, but MAX can be used only where a scalar expression is expected. Since LASTDATE returns a table, you can use it in any expression that expects a table as an argument, such as COUNTROWS. In fact, you can write this expression: COUNTROWS ( LASTDATE ( 'Date'[Date] ) ) which will always return 1 or BLANK (if there are no dates active in the current filter context). You cannot pass MAX as an argument of COUNTROWS. You can pass to LASTDATE a reference to a column or any table expression that returns a column. The following two syntaxes are semantically identical: LASTDATE ( 'Date'[Date] ) LASTDATE ( VALUES ( 'Date'[Date] ) ) The result is the same and the use of VALUES is not required because it is implicit in the first syntax, unless you have a row context active. In that case, be careful that using in a row context the LASTDATE function with a direct column reference will produce a context transition (the row context is transformed into a filter context) that hides the external filter context, whereas using VALUES in the argument preserve the existing filter context without applying the context transition of the row context (see the columns LastDate and Values in the following query and result). You can use any other table expressions (including a FILTER) as LASTDATE argument. For example, the following expression will always return the last date available in the Date table, regardless of the current filter context: LASTDATE ( ALL ( 'Date'[Date] ) ) The following query recap the result produced by the different syntaxes described. EVALUATE CALCULATETABLE( ADDCOLUMNS( VALUES ('Date'[Date] ), "LastDate", LASTDATE( 'Date'[Date] ), "Values", LASTDATE( VALUES ( 'Date'[Date] ) ), "Filter", LASTDATE( FILTER ( VALUES ( 'Date'[Date] ), 'Date'[Date] = MAX ( 'Date'[Date] ) ) ), "All", LASTDATE( ALL ( 'Date'[Date] ) ), "Max", MAX( 'Date'[Date] ) ), 'Date'[Calendar Year] = 2008 ) ORDER BY 'Date'[Date] The LastDate columns repeat the current date, because the context transition happens within the ADDCOLUMNS. The Values column preserve the existing filter context from being replaced by the context transition, so the result corresponds to the last day in year 2008 (which is filtered in the external CALCULATETABLE). The Filter column works like the Values one, even if we use the FILTER instead of the LASTDATE approach. The All column shows the result of LASTDATE ( ALL ( ‘Date’[Date] ) ) that ignores the filter on Calendar Year (in fact the date returned is in year 2010). Finally, the Max column shows the result of the MAX formula, which is the easiest to use and only don’t return a table if you need it (like in a filter argument of CALCULATE or CALCULATETABLE, where using LASTDATE is shorter). I know that using LASTDATE in complex expressions might create some issue. In my experience, the fact that a context transition happens automatically in presence of a row context is the main reason of confusion and unexpected results in DAX formulas using this function. For a reference of DAX formulas using MAX and LASTDATE, read my article about semi-additive measures in DAX.

Read the article

Pure Server-Side Filtering with RadGridView and WCF RIA Services

Those of you who are familiar with WCF RIA Services know that the DomainDataSource control provides a FilterDescriptors collection that enables you to filter data returned by the query on the server. We have been using this DomainDataSource feature in our RIA Services with DomainDataSource online example for almost an year now. In the example, we are listening for RadGridViews Filtering event in order to intercept any filtering that is performed on the client and translate it to something that the DomainDataSource will understand, in this case a System.Windows.Data.FilterDescriptor being added or removed from its FilterDescriptors collection. Think of RadGridView.FilterDescriptors as client-side filtering and of DomainDataSource.FilterDescriptors as server-side filtering. We no longer need the client-side one. With the introduction of the Custom Filtering Controls feature many new possibilities have opened. With these custom controls we no longer need to do any filtering on the client. I have prepared a very small project that demonstrates how to filter solely on the server by using a custom filtering control. As I have already mentioned filtering on the server is done through the FilterDescriptors collection of the DomainDataSource control. This collection holds instances of type System.Windows.Data.FilterDescriptor. The FilterDescriptor has three important properties: PropertyPath: Specifies the name of the property that we want to filter on (the left operand). Operator: Specifies the type of comparison to use when filtering. An instance of FilterOperator Enumeration. Value: The value to compare with (the right operand). An instance of the Parameter Class. By adding filters, you can specify that only entities which meet the condition in the filter are loaded from the domain context. In case you are not familiar with these concepts you might find Brad Abrams blog interesting. Now, our requirements are to create some kind of UI that will manipulate the DomainDataSource.FilterDescriptors collection. When it comes to collections, my first choice of course would be RadGridView. If you are not familiar with the Custom Filtering Controls concept I would strongly recommend getting acquainted with my step-by-step tutorial Custom Filtering with RadGridView for Silverlight and checking the online example out. I have created a simple custom filtering control that contains a RadGridView and several buttons. This control is aware of the DomainDataSource instance, since it is operating on its FilterDescriptors collection. In fact, the RadGridView that is inside it is bound to this collection. In order to display filters that are relevant for the current column only, I have applied a filter to the grid. This filter is a Telerik.Windows.Data.FilterDescriptor and is used to filter the little grid inside the custom control. It should not be confused with the DomainDataSource.FilterDescriptors collection that RadGridView is actually bound to. These are the RIA filters. Additionally, I have added several other features. For example, if you have specified a DataFormatString on your original column, the Value column inside the custom control will pick it up and format the filter values accordingly. Also, I have transferred the data type of the column that you are filtering to the Value column of the custom control. This will help the little RadGridView determine what kind of editor to show up when you begin edit, for example a date picker for DateTime columns. Finally, I have added four buttons two of them can be used to add or remove filters and the other two will communicate the changes you have made to the server. Here is the full source code of the DomainDataSourceFilteringControl. The XAML: <UserControl x:Class="PureServerSideFiltering.DomainDataSourceFilteringControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:telerikGrid="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.GridView" xmlns:telerik="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls" Width="300"> <Border x:Name="LayoutRoot" BorderThickness="1" BorderBrush="#FF8A929E" Padding="5" Background="#FFDFE2E5"> <Grid> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="150"/> <RowDefinition Height="Auto"/> </Grid.RowDefinitions> <StackPanel Grid.Row="0" Margin="2" Orientation="Horizontal" HorizontalAlignment="Center"> <telerik:RadButton Name="addFilterButton" Click="OnAddFilterButtonClick" Content="Add Filter" Margin="2" Width="96"/> <telerik:RadButton Name="removeFilterButton" Click="OnRemoveFilterButtonClick" Content="Remove Filter" Margin="2" Width="96"/> </StackPanel> <telerikGrid:RadGridView Name="filtersGrid" Grid.Row="1" Margin="2" ItemsSource="{Binding FilterDescriptors}" AddingNewDataItem="OnFilterGridAddingNewDataItem" ColumnWidth="*" ShowGroupPanel="False" AutoGenerateColumns="False" CanUserResizeColumns="False" CanUserReorderColumns="False" CanUserFreezeColumns="False" RowIndicatorVisibility="Collapsed" IsFilteringAllowed="False" CanUserSortColumns="False"> <telerikGrid:RadGridView.Columns> <telerikGrid:GridViewComboBoxColumn DataMemberBinding="{Binding Operator}" UniqueName="Operator"/> <telerikGrid:GridViewDataColumn Header="Value" DataMemberBinding="{Binding Value.Value}" UniqueName="Value"/> </telerikGrid:RadGridView.Columns> </telerikGrid:RadGridView> <StackPanel Grid.Row="2" Margin="2" Orientation="Horizontal" HorizontalAlignment="Center"> <telerik:RadButton Name="filterButton" Click="OnApplyFiltersButtonClick" Content="Apply Filters" Margin="2" Width="96"/> <telerik:RadButton Name="clearButton" Click="OnClearFiltersButtonClick" Content="Clear Filters" Margin="2" Width="96"/> </StackPanel> </Grid> </Border> </UserControl> And the code-behind: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using Telerik.Windows.Controls.GridView; using System.Windows.Data; using Telerik.Windows.Controls; using Telerik.Windows.Data; namespace PureServerSideFiltering { /// <summary> /// A custom filtering control capable of filtering purely server-side. /// </summary> public partial class DomainDataSourceFilteringControl : UserControl, IFilteringControl { // The main player here. DomainDataSource domainDataSource; // This is the name of the property that this column displays. private string dataMemberName; // This is the type of the property that this column displays. private Type dataMemberType; /// <summary> /// Identifies the <see cref="IsActive"/> dependency property. /// </summary> /// <remarks> /// The state of the filtering funnel (i.e. full or empty) is bound to this property. /// </remarks> public static readonly DependencyProperty IsActiveProperty = DependencyProperty.Register( "IsActive", typeof(bool), typeof(DomainDataSourceFilteringControl), new PropertyMetadata(false)); /// <summary> /// Gets or sets a value indicating whether the filtering is active. /// </summary> /// <remarks> /// Set this to true if you want to lit-up the filtering funnel. /// </remarks> public bool IsActive { get { return (bool)GetValue(IsActiveProperty); } set { SetValue(IsActiveProperty, value); } } /// <summary> /// Gets or sets the domain data source. /// We need this in order to work on its FilterDescriptors collection. /// </summary> /// <value>The domain data source.</value> public DomainDataSource DomainDataSource { get { return this.domainDataSource; } set { this.domainDataSource = value; } } public System.Windows.Data.FilterDescriptorCollection FilterDescriptors { get { return this.DomainDataSource.FilterDescriptors; } } public DomainDataSourceFilteringControl() { InitializeComponent(); } public void Prepare(GridViewBoundColumnBase column) { this.LayoutRoot.DataContext = this; if (this.DomainDataSource == null) { // Sorry, but we need a DomainDataSource. Can't do anything without it. return; } // This is the name of the property that this column displays. this.dataMemberName = column.GetDataMemberName(); // This is the type of the property that this column displays. // We need this in order to see which FilterOperators to feed to the combo-box column. this.dataMemberType = column.DataType; // We will use our magic Type extension method to see which operators are applicable for // this data type. You can go to the extension method body and see what it does. ((GridViewComboBoxColumn)this.filtersGrid.Columns["Operator"]).ItemsSource = this.dataMemberType.ApplicableFilterOperators(); // This is very nice as well. We will tell the Value column its data type. In this way // RadGridView will pick up the best editor according to the data type. For example, // if the data type of the value is DateTime, you will be editing it with a DatePicker. // Nice! ((GridViewDataColumn)this.filtersGrid.Columns["Value"]).DataType = this.dataMemberType; // Yet another nice feature. We will transfer the original DataFormatString (if any) to // the Value column. In this way if you have specified a DataFormatString for the original // column, you will see all filter values formatted accordingly. ((GridViewDataColumn)this.filtersGrid.Columns["Value"]).DataFormatString = column.DataFormatString; // This is important. Since our little filtersGrid will be bound to the entire collection // of this.domainDataSource.FilterDescriptors, we need to set a Telerik filter on the // grid so that it will display FilterDescriptor which are relevane to this column ONLY! Telerik.Windows.Data.FilterDescriptor columnFilter = new Telerik.Windows.Data.FilterDescriptor("PropertyPath" , Telerik.Windows.Data.FilterOperator.IsEqualTo , this.dataMemberName); this.filtersGrid.FilterDescriptors.Add(columnFilter); // We want to listen for this in order to activate and de-activate the UI funnel. this.filtersGrid.Items.CollectionChanged += this.OnFilterGridItemsCollectionChanged; } /// <summary> // Since the DomainDataSource is a little bit picky about adding uninitialized FilterDescriptors // to its collection, we will prepare each new instance with some default values and then // the user can change them later. Go to the event handler to see how we do this. /// </summary> void OnFilterGridAddingNewDataItem(object sender, GridViewAddingNewEventArgs e) { // We need to initialize the new instance with some values and let the user go on from here. System.Windows.Data.FilterDescriptor newFilter = new System.Windows.Data.FilterDescriptor(); // This is a must. It should know what member it is filtering on. newFilter.PropertyPath = this.dataMemberName; // Initialize it with one of the allowed operators. // TypeExtensions.ApplicableFilterOperators method for more info. newFilter.Operator = this.dataMemberType.ApplicableFilterOperators().First(); if (this.dataMemberType == typeof(DateTime)) { newFilter.Value.Value = DateTime.Now; } else if (this.dataMemberType == typeof(string)) { newFilter.Value.Value = "<enter text>"; } else if (this.dataMemberType.IsValueType) { // We need something non-null for all value types. newFilter.Value.Value = Activator.CreateInstance(this.dataMemberType); } // Let the user edit the new filter any way he/she likes. e.NewObject = newFilter; } void OnFilterGridItemsCollectionChanged(object sender, System.Collections.Specialized.NotifyCollectionChangedEventArgs e) { // We are active only if we have any filters define. In this case the filtering funnel will lit-up. this.IsActive = this.filtersGrid.Items.Count > 0; } private void OnApplyFiltersButtonClick(object sender, RoutedEventArgs e) { if (this.DomainDataSource.IsLoadingData) { return; } // Comment this if you want the popup to stay open after the button is clicked. this.ClosePopup(); // Since this.domainDataSource.AutoLoad is false, this will take into // account all filtering changes that the user has made since the last // Load() and pull the new data to the client. this.DomainDataSource.Load(); } private void OnClearFiltersButtonClick(object sender, RoutedEventArgs e) { if (this.DomainDataSource.IsLoadingData) { return; } // We want to remove ONLY those filters from the DomainDataSource // that this control is responsible for. this.DomainDataSource.FilterDescriptors .Where(fd => fd.PropertyPath == this.dataMemberName) // Only "our" filters. .ToList() .ForEach(fd => this.DomainDataSource.FilterDescriptors.Remove(fd)); // Bye-bye! // Comment this if you want the popup to stay open after the button is clicked. this.ClosePopup(); // After we did our housekeeping, get the new data to the client. this.DomainDataSource.Load(); } private void OnAddFilterButtonClick(object sender, RoutedEventArgs e) { if (this.DomainDataSource.IsLoadingData) { return; } // Let the user enter his/or her requirements for a new filter. this.filtersGrid.BeginInsert(); this.filtersGrid.UpdateLayout(); } private void OnRemoveFilterButtonClick(object sender, RoutedEventArgs e) { if (this.DomainDataSource.IsLoadingData) { return; } // Find the currently selected filter and destroy it. System.Windows.Data.FilterDescriptor filterToRemove = this.filtersGrid.SelectedItem as System.Windows.Data.FilterDescriptor; if (filterToRemove != null && this.DomainDataSource.FilterDescriptors.Contains(filterToRemove)) { this.DomainDataSource.FilterDescriptors.Remove(filterToRemove); } } private void ClosePopup() { System.Windows.Controls.Primitives.Popup popup = this.ParentOfType<System.Windows.Controls.Primitives.Popup>(); if (popup != null) { popup.IsOpen = false; } } } } Finally, we need to tell RadGridViews Columns to use this custom control instead of the default one. Here is how to do it: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Windows.Data; using Telerik.Windows.Data; using Telerik.Windows.Controls; using Telerik.Windows.Controls.GridView; namespace PureServerSideFiltering { public partial class MainPage : UserControl { public MainPage() { InitializeComponent(); this.grid.AutoGeneratingColumn += this.OnGridAutoGeneratingColumn; // Uncomment this if you want the DomainDataSource to start pre-filtered. // You will notice how our custom filtering controls will correctly read this information, // populate their UI with the respective filters and lit-up the funnel to indicate that // filtering is active. Go ahead and try it. this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("Title", System.Windows.Data.FilterOperator.Contains, "Assistant")); this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("HireDate", System.Windows.Data.FilterOperator.IsGreaterThan, new DateTime(1998, 12, 31))); this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("HireDate", System.Windows.Data.FilterOperator.IsLessThanOrEqualTo, new DateTime(1999, 12, 31))); this.employeesDataSource.Load(); } /// <summary> /// First of all, we will need to replace the default filtering control /// of each column with out custom filtering control DomainDataSourceFilteringControl /// </summary> private void OnGridAutoGeneratingColumn(object sender, GridViewAutoGeneratingColumnEventArgs e) { GridViewBoundColumnBase dataColumn = e.Column as GridViewBoundColumnBase; if (dataColumn != null) { // We do not like ugly dates. if (dataColumn.DataType == typeof(DateTime)) { dataColumn.DataFormatString = "{0:d}"; // Short date pattern. // Notice how this format will be later transferred to the Value column // of the grid that we have inside the DomainDataSourceFilteringControl. } // Replace the default filtering control with our. dataColumn.FilteringControl = new DomainDataSourceFilteringControl() { // Let the control know about the DDS, after all it will work directly on it. DomainDataSource = this.employeesDataSource }; // Finally, lit-up the filtering funnel through the IsActive dependency property // in case there are some filters on the DDS that match our column member. string dataMemberName = dataColumn.GetDataMemberName(); dataColumn.FilteringControl.IsActive = this.employeesDataSource.FilterDescriptors .Where(fd => fd.PropertyPath == dataMemberName) .Count() > 0; } } } } The best part is that we are not only writing filters for the DomainDataSource we can read and load them. If the DomainDataSource has some pre-existing filters (like I have created in the code above), our control will read them and will populate its UI accordingly. Even the filtering funnel will light-up! Remember, the funnel is controlled by the IsActive property of our control. While this is just a basic implementation, the source code is absolutely yours and you can take it from here and extend it to match your specific business requirements. Below the main grid there is another debug grid. With its help you can monitor what filter descriptors are added and removed to the domain data source. Download Source Code. (You will have to have the AdventureWorks sample database installed on the default SQLExpress instance in order to run it.) Enjoy!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

ASP.NET MVC HandleError Attribute

- by Ben Griswold

Last Wednesday, I took a whopping 15 minutes out of my day and added ELMAH (Error Logging Modules and Handlers) to my ASP.NET MVC application. If you haven’t heard the news (I hadn’t until recently), ELMAH does a killer job of logging and reporting nearly all unhandled exceptions. As for handled exceptions, I’ve been using NLog but since I was already playing with the ELMAH bits I thought I’d see if I couldn’t replace it. Atif Aziz provided a quick solution in his answer to a Stack Overflow question. I’ll let you consult his answer to see how one can subclass the HandleErrorAttribute and override the OnException method in order to get the bits working. I pretty much took rolled the recommended logic into my application and it worked like a charm. Along the way, I did uncover a few HandleError fact to which I wasn’t already privy. Most of my learning came from Steven Sanderson’s book, Pro ASP.NET MVC Framework. I’ve flipped through a bunch of the book and spent time on specific sections. It’s a really good read if you’re looking to pick up an ASP.NET MVC reference. Anyway, my notes are found a comments in the following code snippet. I hope my notes clarify a few things for you too. public class LogAndHandleErrorAttribute : HandleErrorAttribute { public override void OnException(ExceptionContext context) { // A word from our sponsors: // http://stackoverflow.com/questions/766610/how-to-get-elmah-to-work-with-asp-net-mvc-handleerror-attribute // and Pro ASP.NET MVC Framework by Steven Sanderson // // Invoke the base implementation first. This should mark context.ExceptionHandled = true // which stops ASP.NET from producing a "yellow screen of death." This also sets the // Http StatusCode to 500 (internal server error.) // // Assuming Custom Errors aren't off, the base implementation will trigger the application // to ultimately render the "Error" view from one of the following locations: // // 1. ~/Views/Controller/Error.aspx // 2. ~/Views/Controller/Error.ascx // 3. ~/Views/Shared/Error.aspx // 4. ~/Views/Shared/Error.ascx // // "Error" is the default view, however, a specific view may be provided as an Attribute property. // A notable point is the Custom Errors defaultRedirect is not considered in the redirection plan. base.OnException(context); var e = context.Exception; // If the exception is unhandled, simply return and let Elmah handle the unhandled exception. // Otherwise, try to use error signaling which involves the fully configured pipeline like logging, // mailing, filtering and what have you). Failing that, see if the error should be filtered. // If not, the error simply logged the exception. if (!context.ExceptionHandled || RaiseErrorSignal(e) || IsFiltered(context)) return; LogException(e); // FYI. Simple Elmah logging doesn't handle mail notifications. }

Read the article

Why can't I change the AU_AU locale to en_US?

- by sachin

/bin/bash: warning: setlocale: LC_ALL: cannot change locale ( (unset)) Generating locales... en_US.ISO-8859-1... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done Generation complete. ganesha@ubuntu:~$ sudo update_locale LANG=en_US sudo: update_locale: command not found ganesha@ubuntu:~$ sudo update-locale LANG=en_US perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = " (unset)", LC_PAPER = "AU_AU.UTF-8", LC_ADDRESS = "AU_AU.UTF-8", LC_MONETARY = "AU_AU.UTF-8", LC_MEASUREMAUT = "AU_AU.UTF-8", LC_NUMERIC = "AU_AU.UTF-8", LC_TELEPHONE = "AU_AU.UTF-8", LC_MESSAGES = "AU_AU.UTF-8", LC_COLLATE = "AU_AU.UTF-8", LC_IDAUTIFICATION = "AU_AU.UTF-8", LC_CTYPE = "AU_AU.UTF-8", LC_TIME = "AU_AU.UTF-8", LC_NAME = "AU_AU.UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). ganesha@ubuntu:~$ sudo update-locale LANG=en_US.UTF8 perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = " (unset)", LC_PAPER = "AU_AU.UTF-8", LC_ADDRESS = "AU_AU.UTF-8", LC_MONETARY = "AU_AU.UTF-8", LC_MEASUREMAUT = "AU_AU.UTF-8", LC_NUMERIC = "AU_AU.UTF-8", LC_TELEPHONE = "AU_AU.UTF-8", LC_MESSAGES = "AU_AU.UTF-8", LC_COLLATE = "AU_AU.UTF-8", LC_IDAUTIFICATION = "AU_AU.UTF-8", LC_CTYPE = "AU_AU.UTF-8", LC_TIME = "AU_AU.UTF-8", LC_NAME = "AU_AU.UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). ganesha@ubuntu:~$ gedit ~/.profile (process:6467): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. ganesha@ubuntu:~$ sudo update-locale LANG=en_US.UTF8 perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = " (unset)", LC_PAPER = "AU_AU.UTF-8", LC_ADDRESS = "AU_AU.UTF-8", LC_MONETARY = "AU_AU.UTF-8", LC_MEASUREMAUT = "AU_AU.UTF-8", LC_NUMERIC = "AU_AU.UTF-8", LC_TELEPHONE = "AU_AU.UTF-8", LC_MESSAGES = "AU_AU.UTF-8", LC_COLLATE = "AU_AU.UTF-8", LC_IDAUTIFICATION = "AU_AU.UTF-8", LC_CTYPE = "AU_AU.UTF-8", LC_TIME = "AU_AU.UTF-8", LC_NAME = "AU_AU.UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). ganesha@ubuntu:~$ sudo apt-get install --reinstall locales Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/3359 kB of archives. After this operation, 0 B of additional disk space will be used. perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = " (unset)", LC_TIME = "AU_AU.UTF-8", LC_MONETARY = "AU_AU.UTF-8", LC_CTYPE = "AU_AU.UTF-8", LC_COLLATE = "AU_AU.UTF-8", LC_ADDRESS = "AU_AU.UTF-8", LC_TELEPHONE = "AU_AU.UTF-8", LC_MESSAGES = "AU_AU.UTF-8", LC_NAME = "AU_AU.UTF-8", LC_MEASUREMAUT = "AU_AU.UTF-8", LC_IDAUTIFICATION = "AU_AU.UTF-8", LC_NUMERIC = "AU_AU.UTF-8", LC_PAPER = "AU_AU.UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). (Reading database ... 157848 files and directories currently installed.) Preparing to replace locales 2.13+git20120306-3 (using .../locales_2.13+git20120306-3_all.deb) ... Unpacking replacement locales ... Processing triggers for man-db ... Setting up locales (2.13+git20120306-3) ... /bin/bash: warning: setlocale: LC_ALL: cannot change locale ( (unset)) Generating locales... en_AG.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_AU.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_BW.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_CA.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_DK.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_GB.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_HK.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_IE.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_IN.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_NG.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_NZ.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_PH.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_SG.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_US.ISO-8859-1... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_US.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_ZA.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_ZM.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_ZW.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done Generation complete. ganesha@ubuntu:~$ How to correct this?

Read the article

Integrate BING API for Search inside ASP.Net web application

- by sreejukg

As you might already know, Bing is the Microsoft Search engine and is getting popular day by day. Bing offers APIs that can be integrated into your website to increase your website functionality. At this moment, there are two important APIs available. They are Bing Search API Bing Maps The Search API enables you to build applications that utilize Bing’s technology. The API allows you to search multiple source types such as web; images, video etc. and supports various output prototypes such as JSON, XML, and SOAP. Also you will be able to customize the search results as you wish for your public facing website. Bing Maps API allows you to build robust applications that use Bing Maps. In this article I am going to describe, how you can integrate Bing search into your website. In order to start using Bing, First you need to sign in to http://www.bing.com/toolbox/bingdeveloper/ using your windows live credentials. Click on the Sign in button, you will be asked to enter your windows live credentials. Once signed in you will be redirected to the Developer page. Here you can create applications and get AppID for each application. Since I am a first time user, I don’t have any applications added. Click on the Add button to add a new application. You will be asked to enter certain details about your application. The fields are straight forward, only thing you need to note is the website field, here you need to enter the website address from where you are going to use this application, and this field is optional too. Of course you need to agree on the terms and conditions and then click Save. Once you click on save, the application will be created and application ID will be available for your use. Now we got the APP Id. Basically Bing supports three protocols. They are JSON, XML and SOAP. JSON is useful if you want to call the search requests directly from the browser and use JavaScript to parse the results, thus JSON is the favorite choice for AJAX application. XML is the alternative for applications that does not support SOAP, e.g. flash/ Silverlight etc. SOAP is ideal for strongly typed languages and gives a request/response object model. In this article I am going to demonstrate how to search BING API using SOAP protocol from an ASP.Net application. For the purpose of this demonstration, I am going to create an ASP.Net project and implement the search functionality in an aspx page. Open Visual Studio, navigate to File-> New Project, select ASP.Net empty web application, I named the project as “BingSearchSample”. Add a Search.aspx page to the project, once added the solution explorer will looks similar to the following. Now you need to add a web reference to the SOAP service available from Bing. To do this, from the solution explorer, right click your project, select Add Service Reference. Now the new service reference dialog will appear. In the left bottom of the dialog, you can find advanced button, click on it. Now the service reference settings dialog will appear. In the bottom left, you can find Add Web Reference button, click on it. The add web reference dialog will appear now. Enter the URL as http://api.bing.net/search.wsdl?AppID=<YourAppIDHere>&version=2.2 (replace <yourAppIDHere> with the appID you have generated previously) and click on the button next to it. This will find the web service methods available. You can change the namespace suggested by Bing, but for the purpose of this demonstration I have accepted all the default settings. Click on the Add reference button once you are done. Now the web reference to Search service will be added your project. You can find this under solution explorer of your project. Now in the Search.aspx, that you previously created, place one textbox, button and a grid view. For the purpose of this demonstration, I have given the identifiers (ID) as txtSearch, btnSearch, gvSearch respectively. The idea is to search the text entered in the text box using Bing service and show the results in the grid view. In the design view, the search.aspx looks as follows. In the search.aspx.cs page, add a using statement that points to net.bing.api. I have added the following code for button click event handler. The code is very straight forward. It just calls the service with your AppID, a query to search and a source for searching. Let us run this page and see the output when I enter Microsoft in my textbox. If you want to search a specific site, you can include the site name in the query parameter. For e.g. the following query will search the word Microsoft from www.microsoft.com website. searchRequest.Query = “site:www.microsoft.com Microsoft”; The output of this query is as follows. Integrating BING search API to your website is easy and there is no limit on the customization of the interface you can do. There is no Bing branding required so I believe this is a great option for web developers when they plan for site search.

Read the article

Can't install wine (or ia32-libs) in Ubuntu 12.10 64 bit

- by carestad

As already pointed out here, people seems to have issues with installing wine in the latest version of Ubuntu. I'm suspecting this only happens with 64 bit users. For example, when trying to install wine, wine1.4, wine1.4:i386, wine1.5, wine1.5:i386, ia32-libs or ia32-libs:i386 with apt-get, I get a lot of dependency errors. Doing a sudo apt-get -f install doesn't seem to do the trick, neither does using aptitude. The errors I get is normally that the packages depend on some :i386 package, but installing those manually doesn't work either because they also have dependency issues (isn't APT supposed to do this automatically?!). I also downloaded CrossOver today and tried installing the .deb manually, but the dependency issues show up there as well. When running sudo apt-get -f install after trying to install the CrossOver .deb, apt-get wants to purge the following packages: ia32-crossover intel-gpu-tools libdrm-nouveau2 libgl1-mesa-dri libva-x11-1 ubuntu-desktop vlc xorg xserver-xorg-video-ati xserver-xorg-video-intel xserver-xorg-video-modesetting xserver-xorg-video-openchrome xserver-xorg-video-radeon xserver-xorg-video-vmware What I've tried so far (and didn't work): Installing synaptic, reloading my repositories, searching for ia32 and installing ia32-libs. Using Ubuntu Software Center to install Wine and ia32-libs. Using apt-get and aptitude to install all the differend varieties of the wine packages, both with and without the :i386 and -amd64 suffixes in package names. Disabling the universe and multiverse repos, run a sudo apt-get update and then re-enable them again. Boot a newly downloaded Ubuntu 12.10 x64 live USB and try to install all the different packages there. What I haven't tried (yet): Boot a newly downloaded Ubuntu 12.10 x32 image and try to install wine there (I'm just guessing that will work). Reinstall Ubuntu. Throw my computer out a window. wine alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine : Depends: wine1.5 but it is not going to be installed E: Unable to correct problems, you have held broken packages. wine-1.4 alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine1.4 (...) The following packages have unmet dependencies: wine1.4 : Depends: wine1.4-i386 (= 1.4.1-0ubuntu1) E: Unable to correct problems, you have held broken packages. wine-1.4:i386 alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine1.4:i386 (...) The following packages have unmet dependencies: libaudio2:i386 : Depends: libxt6:i386 but it is not going to be installed libqtgui4:i386 : Depends: libsm6:i386 but it is not going to be installed libunity-webapps0 : Depends: unity-webapps-service but it is not going to be installed openssh-client : Depends: adduser (>= 3.10) but it is not going to be installed Depends: passwd ssh : Depends: openssh-server wine1.4:i386 : Depends: wine1.4-i386:i386 (= 1.4.1-0ubuntu1) Depends: binfmt-support:i386 (>= 1.1.2) Depends: procps:i386 Recommends: cups-bsd:i386 Recommends: gnome-exe-thumbnailer:i386 but it is not installable or kde-runtime:i386 but it is not going to be installed Recommends: ttf-droid:i386 but it is not installable Recommends: ttf-liberation:i386 but it is not installable Recommends: ttf-mscorefonts-installer:i386 Recommends: ttf-umefont:i386 but it is not installable Recommends: ttf-unfonts-core:i386 but it is not installable Recommends: ttf-wqy-microhei:i386 but it is not installable Recommends: winbind:i386 Recommends: winetricks:i386 but it is not going to be installed Recommends: xdg-utils:i386 but it is not installable E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. wine-1.5 alexander@cosmo:~$ sudo apt-get install wine1.5 (...) The following packages have unmet dependencies: wine1.5 : Depends: wine1.5-i386 (= 1.5.16-0ubuntu1) E: Unable to correct problems, you have held broken packages. wine-1.5:i386 alexander@cosmo:~$ sudo apt-get install wine1.5:i386 (...) The following packages have unmet dependencies: libaudio2:i386 : Depends: libxt6:i386 but it is not going to be installed libqtgui4:i386 : Depends: libsm6:i386 but it is not going to be installed libunity-webapps0 : Depends: unity-webapps-service but it is not going to be installed openssh-client : Depends: adduser (>= 3.10) but it is not going to be installed Depends: passwd ssh : Depends: openssh-server wine1.5:i386 : Depends: wine1.5-i386:i386 (= 1.5.16-0ubuntu1) but it is not going to be installed Depends: binfmt-support:i386 (>= 1.1.2) Depends: procps:i386 Recommends: cups-bsd:i386 Recommends: gnome-exe-thumbnailer:i386 but it is not installable or kde-runtime:i386 but it is not going to be installed Recommends: ttf-droid:i386 but it is not installable Recommends: ttf-liberation:i386 but it is not installable Recommends: ttf-mscorefonts-installer:i386 Recommends: ttf-umefont:i386 but it is not installable Recommends: ttf-unfonts-core:i386 but it is not installable Recommends: ttf-wqy-microhei:i386 but it is not installable Recommends: winbind:i386 Recommends: winetricks:i386 but it is not going to be installed Recommends: xdg-utils:i386 but it is not installable E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. ia32-libs alexander@cosmo:~$ sudo apt-get install ia32-libs (...) The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch E: Unable to correct problems, you have held broken packages. ia32-libs:i386 alexander@cosmo:~$ sudo apt-get install ia32-libs:i386 (...) Package ia32-libs:i386 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: lib32z1 lib32ncurses5 lib32bz2-1.0 lib32asound2 E: Package 'ia32-libs:i386' has no installation candidate

Read the article

Oracle Enterprise Data Quality: Ever Integration-ready

- by Mala Narasimharajan

It is closing in on a year now since Oracle’s acquisition of Datanomic, and the addition of Oracle Enterprise Data Quality (EDQ) to the Oracle software family. The big move has caused some big shifts in emphasis and some very encouraging excitement from the field. To give an illustration, combined with a shameless promotion of how EDQ can help to give quick insights into your data, I did a quick Phrase Profile of the subject field of emails to the Global EDQ mailing list since it was set up last September. The results revealed a very clear theme: Integration, Integration, Integration! As well as the important Siebel and Oracle Data Integrator (ODI) integrations, we have been asked about integration with a huge variety of Oracle applications, including EBS, Peoplesoft, CRM on Demand, Fusion, DRM, Endeca, RightNow, and more - and we have not stood still! While it would not have been possible to develop specific pre-integrations with all of the above within a year, we have developed a package of feature-rich out-of-the-box web services and batch processes that can be plugged into any application or middleware technology with ease. And with Siebel, they work out of the box. Oracle Enterprise Data Quality version 9.0.4 includes the Customer Data Services (CDS) pack – a ready set of standard processes with standard interfaces, to provide integrated: Address verification and cleansing Individual matching Organization matching The services can are suitable for either Batch or Real-Time processing, and are enabled for international data, with simple configuration options driving the set of locale-specific dictionaries that are used. For example, large dictionaries are provided to support international name transcription and variant matching, including highly specialized handling for Arabic, Japanese, Chinese and Korean data. In total across all locales, CDS includes well over a million dictionary entries. Excerpt from EDQ’s CDS Individual Name Standardization Dictionary CDS has been developed to replace the OEM of Informatica Identity Resolution (IIR) for attached Data Quality on the Oracle price list, but does this in a way that creates a ‘best of both worlds’ situation for customers, who can harness not only the out-of-the-box functionality of pre-packaged matching and standardization services, but also the flexibility of OEDQ if they want to customize the interfaces or the process logic, without having to learn more than one product. From a competitive point of view, we believe this stands us in good stead against our key competitors, including Informatica, who have separate ‘Identity Resolution’ and general DQ products, and IBM, who provide limited out-of-the-box capabilities (with a steep learning curve) in both their QualityStage data quality and Initiate matching products. Here is a brief guide to the main services provided in the pack: Address Verification and Standardization EDQ’s CDS Address Cleaning Process The Address Verification and Standardization service uses EDQ Address Verification (an OEM of Loqate software) to verify and clean addresses in either real-time or batch. The Address Verification processor is wrapped in an EDQ process – this adds significant capabilities over calling the underlying Address Verification API directly, specifically: Country-specific thresholds to determine when to accept the verification result (and therefore to change the input address) based on the confidence level of the API Optimization of address verification by pre-standardizing data where required Formatting of output addresses into the input address fields normally used by applications Adding descriptions of the address verification and geocoding return codes The process can then be used to provide real-time and batch address cleansing in any application; such as a simple web page calling address cleaning and geocoding as part of a check on individual data. Duplicate Prevention Unlike Informatica Identity Resolution (IIR), EDQ uses stateless services for duplicate prevention to avoid issues caused by complex replication and synchronization of large volume customer data. When a record is added or updated in an application, the EDQ Cluster Key Generation service is called, and returns a number of key values. These are used to select other records (‘candidates’) that may match in the application data (which has been pre-seeded with keys using the same service). The ‘driving record’ (the new or updated record) is then presented along with all selected candidates to the EDQ Matching Service, which decides which of the candidates are a good match with the driving record, and scores them according to the strength of match. In this model, complex multi-locale EDQ techniques can be used to generate the keys and ensure that the right balance between performance and matching effectiveness is maintained, while ensuring that the application retains control of data integrity and transactional commits. The process is explained below: EDQ Duplicate Prevention Architecture Note that where the integration is with a hub, there may be an additional call to the Cluster Key Generation service if the master record has changed due to merges with other records (and therefore needs to have new key values generated before commit). Batch Matching In order to allow customers to use different match rules in batch to real-time, separate matching templates are provided for batch matching. For example, some customers want to minimize intervention in key user flows (such as adding new customers) in front end applications, but to conduct a more exhaustive match on a regular basis in the back office. The batch matching jobs are also used when migrating data between systems, and in this case normally a more precise (and automated) type of matching is required, in order to minimize the review work performed by Data Stewards. In batch matching, data is captured into EDQ using its standard interfaces, and records are standardized, clustered and matched in an EDQ job before matches are written out. As with all EDQ jobs, batch matching may be called from Oracle Data Integrator (ODI) if required. When working with Siebel CRM (or master data in Siebel UCM), Siebel’s Data Quality Manager is used to instigate batch jobs, and a shared staging database is used to write records for matching and to consume match results. The CDS batch matching processes automatically adjust to Siebel’s ‘Full Match’ (match all records against each other) and ‘Incremental Match’ (match a subset of records against all of their selected candidates) modes. The Future The Customer Data Services Pack is an important part of the Oracle strategy for EDQ, offering a clear path to making Data Quality Assurance an integral part of enterprise applications, and providing a strong value proposition for adopting EDQ. We are planning various additions and improvements, including: An out-of-the-box Data Quality Dashboard Even more comprehensive international data handling Address search (suggesting multiple results) Integrated address matching The EDQ Customer Data Services Pack is part of the Enterprise Data Quality Media Pack, available for download at http://www.oracle.com/technetwork/middleware/oedq/downloads/index.html.

Read the article

Internet Explorer and Cookie Domains

- by Rick Strahl

I've been bitten by some nasty issues today in regards to using a domain cookie as part of my FormsAuthentication operations. In the app I'm currently working on we need to have single sign-on that spans multiple sub-domains (www.domain.com, store.domain.com, mail.domain.com etc.). That's what a domain cookie is meant for - when you set the cookie with a Domain value of the base domain the cookie stays valid for all sub-domains. I've been testing the app for quite a while and everything is working great. Finally I get around to checking the app with Internet Explorer and I start discovering some problems - specifically on my local machine using localhost. It appears that Internet Explorer (all versions) doesn't allow you to specify a domain of localhost, a local IP address or machine name. When you do, Internet Explorer simply ignores the cookie. In my last post I talked about some generic code I created to basically parse out the base domain from the current URL so a domain cookie would automatically used using this code:private void IssueAuthTicket(UserState userState, bool rememberMe) { FormsAuthenticationTicket ticket = new FormsAuthenticationTicket(1, userState.UserId, DateTime.Now, DateTime.Now.AddDays(10), rememberMe, userState.ToString()); string ticketString = FormsAuthentication.Encrypt(ticket); HttpCookie cookie = new HttpCookie(FormsAuthentication.FormsCookieName, ticketString); cookie.HttpOnly = true; if (rememberMe) cookie.Expires = DateTime.Now.AddDays(10); var domain = Request.Url.GetBaseDomain(); if (domain != Request.Url.DnsSafeHost) cookie.Domain = domain; HttpContext.Response.Cookies.Add(cookie); } This code works fine on all browsers but Internet Explorer both locally and on full domains. And it also works fine for Internet Explorer with actual 'real' domains. However, this code fails silently for IE when the domain is localhost or any other local address. In that case Internet Explorer simply refuses to accept the cookie and fails to log in. Argh! The end result is that the solution above trying to automatically parse the base domain won't work as local addresses end up failing. Configuration Setting Given this screwed up state of affairs, the best solution to handle this is a configuration setting. Forms Authentication actually has a domain key that can be set for FormsAuthentication so that's natural choice for the storing the domain name: <authentication mode="Forms"> <forms loginUrl="~/Account/Login" name="gnc" domain="mydomain.com" slidingExpiration="true" timeout="30" xdt:Transform="Replace"/> </authentication> Although I'm not actually letting FormsAuth set my cookie directly I can still access the domain name from the static FormsAuthentication.CookieDomain property, by changing the domain assignment code to:if (!string.IsNullOrEmpty(FormsAuthentication.CookieDomain)) cookie.Domain = FormsAuthentication.CookieDomain; The key is to only set the domain when actually running on a full authority, and leaving the domain key blank on the local machine to avoid the local address debacle. Note if you want to see this fail with IE, set the domain to domain="localhost" and watch in Fiddler what happens. Logging Out When specifying a domain key for a login it's also vitally important that that same domain key is used when logging out. Forms Authentication will do this automatically for you when the domain is set and you use FormsAuthentication.SignOut(). If you use an explicit Cookie to manage your logins or other persistant value, make sure that when you log out you also specify the domain. IOW, the expiring cookie you set for a 'logout' should match the same settings - name, path, domain - as the cookie you used to set the value.HttpCookie cookie = new HttpCookie("gne", ""); cookie.Expires = DateTime.Now.AddDays(-5); // make sure we use the same logic to release cookie var domain = Request.Url.GetBaseDomain(); if (domain != Request.Url.DnsSafeHost) cookie.Domain = domain; HttpContext.Response.Cookies.Add(cookie); I managed to get my code to do what I needed it to, but man I'm getting so sick and tired of fixing IE only bugs. I spent most of the day today fixing a number of small IE layout bugs along with this issue which took a bit of time to trace down.© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Hack Extension Files to Make Them Version-Compatible for Firefox

- by Asian Angel

A well known drawback in using Firefox is the problem with extension compatibility when a new major version is released. Whether it is for a new extension that you are trying for the first time or an old favorite we have a way to get those extensions working for you again. There are multiple reasons why you might want to choose this method to fix a non-compatible extension: You are uncomfortable with tweaking the “about:config” settings You prefer to maintain the original “about:config” settings in a pristine state and like having compatibility checking active You are looking to gain some “geek cred” Keep in mind that most extensions will work perfectly well with a new version of Firefox and simply have the “version compatibility number” problem. But once in a while there may be one that needs to have some work done on it by the extension’s author. The Problem Here is a perfect example of everyone’s least favorite “extension message”. This is the last thing that you need when all that you want is for your favorite extension (or a new one) to work on a fresh clean install. Note: This works nicely to “replace” non-compatible extensions already present in your browser if you are simply upgrading. Hacking the XPI File For this procedure you will need to manually download the extension to your hard-drive (right click on the extension’s “Install Button” and select “Save As”). Once you have done that you are ready to start hacking the extension. For our example we chose the “GCal Popup Extension”. The best thing to do is place the extension in a new folder (i.e. the Desktop or other convenient location) then unzip it just the same way that you would with any regular zip file. Once it is unzipped you will see the various folders and files that were in the “xpi file” (we had four files here but depending on the extension the number may vary). There is only one file that you need to focus on…the “install.rdf” file. Note: At this point you should move the original extension file to a different location (i.e. outside of the folder) so that it is no longer present. Open the file in “Notepad” so that you can change the number for the “maxVersion”. Here the number is listed as “3.5.*” but we needed to make it higher… Replacing the “5” with a “7” is all that we needed to do. Once you have entered your new “maxVersion” number save the file. At this point you will need to re-zip all of the files back into a single file. Make certain that you “create” a file with the “.zip file extension” otherwise this will not work. Once you have the new zip file created you will need to rename the entire file including the “file extension”. For our example we copied and pasted the original extension name. Once you have changed the name click outside of the “text area”. You will see a small message window like this asking for confirmation…click “Yes” to finish the process. Now your modified/updated extension is ready to install. Drag the extension into your browser to install it and watch that wonderful “Restart to complete the installation.” message appear. As soon as your browser starts you can check the “Add-ons Manager Window” and see the version compatibility numbers for the extension. Looking very very nice! And just like that your extension should be up and running without any problems. Conclusion If you are looking to try something new, gain some geek cred, or just want to keep your Firefox install as close to the original condition as possible this method should get those extensions working nicely for you again. Similar Articles Productive Geek Tips Make Firefox Extensions Compatible After Firefox Update Breaks Them For No Good ReasonCheck Extension Compatibility for Upcoming Firefox ReleasesFirefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible ExtensionsHow To Force Extension Compatibility with Firefox 3.6+Test and Report Add-on Compatibility in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

Read the article

Rendering ASP.NET MVC Razor Views outside of MVC revisited

- by Rick Strahl

Last year I posted a detailed article on how to render Razor Views to string both inside of ASP.NET MVC and outside of it. In that article I showed several different approaches to capture the rendering output. The first and easiest is to use an existing MVC Controller Context to render a view by simply passing the controller context which is fairly trivial and I demonstrated a simple ViewRenderer class that simplified the process down to a couple lines of code. However, if no Controller Context is available the process is not quite as straight forward and I referenced an old, much more complex example that uses my RazorHosting library, which is a custom self-contained implementation of the Razor templating engine that can be hosted completely outside of ASP.NET. While it works inside of ASP.NET, it’s an awkward solution when running inside of ASP.NET, because it requires a bit of setup to run efficiently.Well, it turns out that I missed something in the original article, namely that it is possible to create a ControllerContext, if you have a controller instance, even if MVC didn’t create that instance. Creating a Controller Instance outside of MVCThe trick to make this work is to create an MVC Controller instance – any Controller instance – and then configure a ControllerContext through that instance. As long as an HttpContext.Current is available it’s possible to create a fully functional controller context as Razor can get all the necessary context information from the HttpContextWrapper().The key to make this work is the following method:/// <summary> /// Creates an instance of an MVC controller from scratch /// when no existing ControllerContext is present /// </summary> /// <typeparam name="T">Type of the controller to create</typeparam> /// <returns>Controller Context for T</returns> /// <exception cref="InvalidOperationException">thrown if HttpContext not available</exception> public static T CreateController<T>(RouteData routeData = null) where T : Controller, new() { // create a disconnected controller instance T controller = new T(); // get context wrapper from HttpContext if available HttpContextBase wrapper = null; if (HttpContext.Current != null) wrapper = new HttpContextWrapper(System.Web.HttpContext.Current); else throw new InvalidOperationException( "Can't create Controller Context if no active HttpContext instance is available."); if (routeData == null) routeData = new RouteData(); // add the controller routing if not existing if (!routeData.Values.ContainsKey("controller") && !routeData.Values.ContainsKey("Controller")) routeData.Values.Add("controller", controller.GetType().Name .ToLower() .Replace("controller", "")); controller.ControllerContext = new ControllerContext(wrapper, routeData, controller); return controller; }This method creates an instance of a Controller class from an existing HttpContext which means this code should work from anywhere within ASP.NET to create a controller instance that’s ready to be rendered. This means you can use this from within an Application_Error handler as I needed to or even from within a WebAPI controller as long as it’s running inside of ASP.NET (ie. not self-hosted). Nice.So using the ViewRenderer class from the previous article I can now very easily render an MVC view outside of the context of MVC. Here’s what I ended up in my Application’s custom error HttpModule: protected override void OnDisplayError(WebErrorHandler errorHandler, ErrorViewModel model) { var Response = HttpContext.Current.Response; Response.ContentType = "text/html"; Response.StatusCode = errorHandler.OriginalHttpStatusCode; var context = ViewRenderer.CreateController<ErrorController>().ControllerContext; var renderer = new ViewRenderer(context); string html = renderer.RenderView("~/Views/Shared/GenericError.cshtml", model); Response.Write(html); }That’s pretty sweet, because it’s now possible to use ViewRenderer just about anywhere in any ASP.NET application, not only inside of controller code. This also allows the constructor for the ViewRenderer from the last article to work without a controller context parameter, using a generic view as a base for the controller context when not passed:public ViewRenderer(ControllerContext controllerContext = null) { // Create a known controller from HttpContext if no context is passed if (controllerContext == null) { if (HttpContext.Current != null) controllerContext = CreateController<ErrorController>().ControllerContext; else throw new InvalidOperationException( "ViewRenderer must run in the context of an ASP.NET " + "Application and requires HttpContext.Current to be present."); } Context = controllerContext; }In this case I use the ErrorController class which is a generic controller instance that exists in the same assembly as my ViewRenderer class and that works just fine since ‘generically’ rendered views tend to not rely on anything from the controller other than the model which is explicitly passed.While these days most of my apps use MVC I do still have a number of generic pieces in most of these applications where Razor comes in handy. This includes modules like the above, which when they error often need to display error output. In other cases I need to generate string template output for emailing or logging data to disk. Being able to render simply render an arbitrary View to and pass in a model makes this super nice and easy at least within the context of an ASP.NET application!You can check out the updated ViewRenderer class below to render your ‘generic views’ from anywhere within your ASP.NET applications. Hope some of you find this useful.ResourcesViewRenderer Class in Westwind.Web.Mvc Library (Github)Original ViewRenderer ArticleRazor Hosting Library (GitHub)Original Razor Hosting Article© Rick Strahl, West Wind Technologies, 2005-2013Posted in ASP.NET MVC Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Inserting and Deleting Sub Rows in GridView

- by Vincent Maverick Durano

A user in the forums (http://forums.asp.net) is asking how to insert sub rows in GridView and also add delete functionality for the inserted sub rows. In this post I'm going to demonstrate how to this in ASP.NET WebForms. The basic idea to achieve this is we just need to insert row data in the DataSource that is being used in GridView since the GridView rows will be generated based on the DataSource data. To make it more clear then let's build up a sample application. To start fire up Visual Studio and create a WebSite or Web Application project and then add a new WebForm. In the WebForm ASPX page add this GridView markup below: 1: <asp:gridview ID="GridView1" runat="server" AutoGenerateColumns="false" onrowdatabound="GridView1_RowDataBound"> 2: <Columns> 3: <asp:BoundField DataField="RowNumber" HeaderText="Row Number" /> 4: <asp:TemplateField HeaderText="Header 1"> 5: <ItemTemplate> 6: <asp:TextBox ID="TextBox1" runat="server"></asp:TextBox> 7: </ItemTemplate> 8: </asp:TemplateField> 9: <asp:TemplateField HeaderText="Header 2"> 10: <ItemTemplate> 11: <asp:TextBox ID="TextBox2" runat="server"></asp:TextBox> 12: </ItemTemplate> 13: </asp:TemplateField> 14: <asp:TemplateField HeaderText="Header 3"> 15: <ItemTemplate> 16: <asp:TextBox ID="TextBox3" runat="server"></asp:TextBox> 17: </ItemTemplate> 18: </asp:TemplateField> 19: <asp:TemplateField HeaderText="Action"> 20: <ItemTemplate> 21: <asp:LinkButton ID="LinkButton1" runat="server" onclick="LinkButton1_Click" Text="Insert"></asp:LinkButton> 22: </ItemTemplate> 23: </asp:TemplateField> 24: </Columns> 25: </asp:gridview> Then at the code behind source of ASPX page you can add this codes below: 1: private DataTable FillData() { 2: 3: DataTable dt = new DataTable(); 4: DataRow dr = null; 5: 6: //Create DataTable columns 7: dt.Columns.Add(new DataColumn("RowNumber", typeof(string))); 8: 9: //Create Row for each columns 10: dr = dt.NewRow(); 11: dr["RowNumber"] = 1; 12: dt.Rows.Add(dr); 13: 14: dr = dt.NewRow(); 15: dr["RowNumber"] = 2; 16: dt.Rows.Add(dr); 17: 18: dr = dt.NewRow(); 19: dr["RowNumber"] = 3; 20: dt.Rows.Add(dr); 21: 22: dr = dt.NewRow(); 23: dr["RowNumber"] = 4; 24: dt.Rows.Add(dr); 25: 26: dr = dt.NewRow(); 27: dr["RowNumber"] = 5; 28: dt.Rows.Add(dr); 29: 30: //Store the DataTable in ViewState for future reference 31: ViewState["CurrentTable"] = dt; 32: 33: return dt; 34: 35: } 36: 37: private void BindGridView(DataTable dtSource) { 38: GridView1.DataSource = dtSource; 39: GridView1.DataBind(); 40: } 41: 42: private DataRow InsertRow(DataTable dtSource, string value) { 43: DataRow dr = dtSource.NewRow(); 44: dr["RowNumber"] = value; 45: return dr; 46: } 47: //private DataRow DeleteRow(DataTable dtSource, 48: 49: protected void Page_Load(object sender, EventArgs e) { 50: if (!IsPostBack) { 51: BindGridView(FillData()); 52: } 53: } 54: 55: protected void LinkButton1_Click(object sender, EventArgs e) { 56: LinkButton lb = (LinkButton)sender; 57: GridViewRow row = (GridViewRow)lb.NamingContainer; 58: DataTable dtCurrentData = (DataTable)ViewState["CurrentTable"]; 59: if (lb.Text == "Insert") { 60: //Insert new row below the selected row 61: dtCurrentData.Rows.InsertAt(InsertRow(dtCurrentData, row.Cells[0].Text + "-sub"), row.RowIndex + 1); 62: 63: } 64: else { 65: //Delete selected sub row 66: dtCurrentData.Rows.RemoveAt(row.RowIndex); 67: } 68: 69: BindGridView(dtCurrentData); 70: ViewState["CurrentTable"] = dtCurrentData; 71: } 72: 73: protected void GridView1_RowDataBound(object sender, GridViewRowEventArgs e) { 74: if (e.Row.RowType == DataControlRowType.DataRow) { 75: if (e.Row.Cells[0].Text.Contains("-sub")) { 76: ((LinkButton)e.Row.FindControl("LinkButton1")).Text = "Delete"; 77: } 78: } 79: } As you can see the code above is pretty straight forward and self explainatory but just to give you a short explaination the code above is composed of three (3) private methods which are the FillData(), BindGridView and InsertRow(). The FillData() method is a method that returns a DataTable and basically creates a dummy data in the DataTable to be used as the GridView DataSource. You can replace the code in that method if you want to use actual data from database but for the purpose of this example I just fill the DataTable with a dummy data on it. The BindGridVew is a method that handles the actual binding of GridVew. The InsertRow() is a method that returns a DataRow. This method handles the insertion of the sub row. Now in the LinkButton OnClick event, we casted the sender to a LinkButton to determine the specific object that fires up the event and get the row values. We then reference the Data from ViewState to get the current data that is being used in the GridView. If the LinkButton text is "Insert" then we will insert new row to the DataSource ( in this case the DataTable) based on the rowIndex if not then Delete the sub row that was added. Here are some screen shots of the output below: On initial load: After inserting a sub row: That's it! I hope someone find this post useful! Technorati Tags: ASP.NET,C#,GridView

Read the article

ISO Files to USB – The Cheap and Easy Way

- by RonGarlit

(DISCLAIMER: Yes there are lots of more elegant ISO software beside the free Microsoft one I’m about to show. But free is free and it has been tested and works for me for making advance bootable USB drives. That is another story. Look up Windows 8 Developer Preview for that one on BING.) For those of use that work with new technology all the time we accumulate a lot of ISO files and have to burn them to CD/DVD’s quite often. But we now have machines without burner in the corporate environment. We have personally Netbooks and light wait highly mobile laptops that do not have DVD burner. USB ports are all the rage and now we have USB 3.0 which is way faster than the 2.0 we are used to. Just looking at the technology, space saving and the cost issues alone is a reason to buy these answer to the DVD’s. So what is special about USB 2.0 and USB 3.0? USB 2 has a maximum speed of 480 Mbps... (That is Megabits per SECOND!!) Now look at the storage that we have with USB thumb drives that are now up to 64 GB in size, cell phone and PDAs that have a lots of internal storage built in well above the 16 Gig range. At the MAX USB 2.0 speed of 480 Mbps a full transfer of data in between devices can take a long time. Time is money right. Every back up a iPhone? Don’t get me started. So at least the engineers have been planning ahead with USB 3.0 which offers a maximum transfer speed of 4.8 Gbps... (That is Giga bits per SECOND!!) That speed is almost 10 times faster than USB 2.0 …. We don’t need to do the math on that one do we? But for now I'm thrilled with USB 2.0 and the fact I can get these little 4 Gig USB drives for $4.00 each at Staples on sale. Well that is a no brainer don’t you think. But what can you do with them to replace that DVD. Simply and cheaply put………. THIS! First let’s get an ISO file like the Visual Studio 2010 Ultimate DVD ISO from MSDN to demonstrate with. I develop on several computers so this is a good choice for me. So we downloaded the ISO file and put it in a folder somewhere like this. Next we go download to the Windows 7 USB/DVD Download Tool site and read about the tool. http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool And click this like to get the tool and install it. Once it is installed you go to the Start, Programs menu, Windows 7 USB DVD Download Tool folder. And then click the tool to open it up. As you will see it is a sweet, simple tool that was originally designed to put the ISO for Windows 7 which is designed to be bootable on a USB or DVD for us geeks to play with. It is now being used for the Windows 8 Developer Preview by many developers for that for the same purpose it was built for in the past. But for now we will use it to put a NON Bootable ISO on a USB. Hey it does the job and I’m reusing a left over program. Why buy the fancy one or a free trial and clutter up my machine. We will click the BROWSE button and navigate to where we put our ISO file we want to put on the USB drive. Obviously we are going to click NEXT and continue to select a USB Device (you can guess what the DVD button is for). Next we select the USB that we have plugged into one of our laptops USB ports. Then we click the BEGIN COPYING button and the first thing the program does is format our USB drive. Then it starts copying out files out of the ISO and constructing the USB as if it was a DVD. So now that the files are copying to the drive I’m going to warn you. We will error out here. This program was design for bootable ISO’s of which this one is NOT. No problem because what fails it the writing of the bootable data to the drive that isn’t there. No biggie…. Forget the STARTOVER button is even there and click the dialog’s CLOSE button and exit the program. Now go to Windows Explorer and navigate to the USB Device. You can now access everything and even add stuff to the drive. But for me I want to keep this drive for one purpose and that is to install VS2010 on various machines. So the only stuff I’ll add to this is a folder of notes on things on visual studio that I might want to put on other machines I’m installing VS2010 on to. So that is it. Have a nice day! The Ron

Read the article

A Rose by Any Other Name..

- by Geoff N. Hiten

It is always a good start when you can steal a title line from one of the best writers in the English language. Let’s hope I can make the rest of this post live up to the opening. One recurring problem with SQL server is moving databases to new servers. Client applications use a variety of ways to resolve SQL Server names, some of which are not changed easily <cough SharePoint /cough>. If you happen to be using default instances on both the source and target SQL Server, then the solution is pretty simple. You create (or bug the network admin until she creates) two DNS “A” records. One points the old name to the new IP address. The other creates a new alias for the old server, since the original system name is now redirected. Note this will redirect ALL traffic from the old server to the new server, including RDP and file share connection attempts. Figure 1 – Microsoft DNS MMC Snap-In Figure 2 – DNS New Host Dialog Box Both records are necessary so you can still access the old server via an alternate name. Server Role IP Address Name Alias Source 10.97.230.60 SQL01 SQL01_Old Target 10.97.230.80 SQL02 SQL01 Table 1 – Alias List If you or somebody set up connections via IP address, you deserve to have to go to each app and fix it by hand. That is the only way to fix that particular foul-up. If have to deal with Named Instances either as a source or a target, then it gets more complicated. The standard fix is to use the SQL Server Configuration Manager (or one of its earlier incarnations) to create a SQL client alias to redirect the connection. This can be a pain installing and configuring the app on multiple client servers. The good news is that SQL Server Configuration Manager AND all of its earlier versions simply write a few registry keys. Extracting the keys into a .reg file makes centralized automated deployment a snap. If the client is a 32-bit system, you have to extract the native key. If it is a 64-bit, you have to extract the native key and the WoW (32 bit on 64 bit host) key. First, pick a development system to create the actual registry key. If you do this repeatedly, you can simply edit an existing registry file. Create the entry using the SQL Configuration Manager. You must use a 64-bit system to create the WoW key. The following example redirects from a named instance “SQL01\SQLUtiluty” to a default instance on “SQL02”. Figure 3 – SQL Server Configuration Manager - Native Figure 3 shows the native key listing. Figure 4 – SQL Server Configuration Manager – WoW If you think you don’t need the WoW key because your app is 64 it, think again. SQL Server Management Server is a 32-bit app, as are most SQL test utilities. Always create both keys for 64-bit target systems. Now that the keys exist, we can extract them into a .reg file. Fire up REGEDIT and browse to the following location: HKLM\Software\Microsoft\MSSQLServer\Client\ConnectTo. You can also search the registry for the string value of one of the server names (old or new). Right click on the “ConnectTo” label and choose “Export”. Save with an appropriate name and location. The resulting file should look something like this: Figure 5 – SQL01_Alias.reg Repeat the process with the location: HKLM\Software\Wow6432Node\Microsoft\MSSQLServer\Client\ConnectTo Note that if you have multiple alias entries, ALL of the entries will be exported. In that case, you can edit the file and remove the extra aliases. You can edit the files together into a single file. Just leave a blank line between new keys like this: Figure 6 – SQL01_Alias_All.reg Of course if you have an automatic way to deploy, it makes sense to have an automatic way to Un-deploy. To delete a registry key, simply edit the .reg file and replace the target with a “-“ sign like so. Figure 7 – SQL01_Alias_UNDO.reg Now we have the ability to move any database to any server without having to install or change any applications on any client server. The whole process should be transparent to the applications, which makes planning and coordinating database moves a far simpler task.

Read the article

10 Great Free Icon Packs To Theme Your Android Phone

- by Chris Hoffman

Android allows you to customize your home screen, adding widgets, arranging shortcuts and folders, choosing a background, and even replacing the included launcher entirely. You can install icon packs to theme your app icons, too. Third-party launchers use standard app icons by default, but they don’t have to. You can install icon packs that third-party launchers will use in place of standard app icons. How to Use Icon Packs To use icon packs, you’ll need to use a third-party launcher that supports them, such as Nova, Apex, ADW, Go Launcher, Holo Launcher, or Action Launcher Pro. Once you’re using a third-party launcher, you can install an icon pack and go into your launcher’s settings. You’ll find an option that allows you to choose between the icon packs you’ve installed. Many of these icon packs also include wallpapers, which you can set in the normal way. MIUI 5 Icons This icon pack offers over 1900 free icons that are similar to the icons used by the MIUi ROM developed by China’s Xiaomi Tech. The large list of icons is a big plus — this pack will give the majority of your app icons a very slick, consistent look. DCikonZ Theme DCikonZ is a free icon theme that includes a whopping 4000+ icons with a consistent look. This icon theme stands out not just because it’s huge, but also for offering for going in its own direction and avoiding the super-simple, flat look many icon packs use. Holo Icons Holo Icons replaces many app icons with simple, consistent-looking that match Google’s Holo style. If you’re a fan of Android’s Holo look, give it a try. It even tweaks many of the icons from Google’s own apps to make them look more consistent. Square Icon Pack Square Icon Pack turns your icons into simple squares. Even Google Chrome becomes an orb instead of a square. This makes every icon a consistent size and offers a unique look. The icons here almost look a bit like the small-size tiles available on Windows Phone and Windows 8.1. The free version doesn’t offer as many icons as the paid version, but it does offer icons for many popular apps. Rounded Want rounded icons instead? Try the Rounded icon theme, which offers simple rounded icons. The developer says they’re inspired by the consistently round icons used on Mozilla’s Firefox OS. Crumbled Icon Pack Crumbled Icon Pack applies an effect that makes icons look as if they’r crumbling. Rather than theming individual icons, Crumbled Icon Pack adds an effect to every app icon on your device. This means that all your app icons will be themed and consistent. Dainty Icon Pack Is your Android home screen too colorful? Dainty Icon Pack offers simple, gray-on-white icons for over 1200 apps. It’d be ideal over a simple background. The contrast may be a bit low here with the gray-on-white, but it’s otherwise very slick. Simplex Icons Simplex Icons offers more contrast, with black-on-gray icons. This icon pack could simplify busy home screens, allowing photographic wallpapers to come through. Min Icon Set Min attempts to go as minimal as possible, offering simple white icons for over 570 apps. It would be ideal over a simple wallpaper with app names hidden in your launcher, offering a calming, minimal home screen. For apps it doesn’t recognize, it will enclose part of the app’s icon in a white circle. Elegance Elegance goes in another direction entirely, offering icons that incorporate more details and gradients rather than going for minimalism. Its over 1200 icons offer another good option for people who aren’t into the minimal, flat look. Icon pack designers generally have to create and include their own icons to replace icons associated with specific apps, so you’ll probably find a few of your app icons aren’t replaced with most of these themes. Of course, a standard Android phone without an icon pack doesn’t have consistent icons, either. Even if all the icons in your app drawer aren’t themed, the few app icons you have on your home screen will be if you use widely used apps.

Read the article

.NET vs Windows 8

- by Simon Cooper

So, day 1 of DevWeek. Lots and lots of Windows 8 and WinRT, as you would expect. The keynote had some actual content in it, fleshed out some of the details of how your apps linked into the Metro infrastructure, and confirmed that there would indeed be an enterprise version of the app store available for Metro apps.) However, that's, not what I want to focus this post on. What I do want to focus on is this: Windows 8 does not make .NET developers obsolete. Phew! .NET in the New Ecosystem In all the hype around Windows 8 the past few months, a lot of developers have got the impression that .NET has been sidelined in Windows 8; C++ and COM is back in vogue, and HTML5 + JavaScript is the New Way of writing applications. You know .NET? It's yesterday's tech. Enter the 21st Century and write <div>! However, after speaking to people at the conference, and after a couple of talks by Dave Wheeler on the innards of WinRT and how .NET interacts with it, my views on the coming operating system have changed somewhat. To summarize what I've picked up, in no particular order (none of this is official, just my sense of what's been said by various people): Metro apps do not replace desktop apps. That is, Windows 8 fully supports .NET desktop applications written for every other previous version of Windows, and will continue to do so in the forseeable future. There are some apps that simply do not fit into Metro. They do not fit into the touch-based paradigm, and never will. Traditional desktop support is not going away anytime soon. The reason Silverlight has been hidden in all the Metro hype is that Metro is essentially based on Silverlight design principles. Silverlight developers will have a much easier time writing Metro apps than desktop developers, as they would already be used to all the principles of sandboxing and separation introduced with Silverlight. It's desktop developers who are going to have to adapt how they work. .NET + XAML is equal to HTML5 + JS in importance. Although the underlying WinRT system is built on C++ & COM, most application development will be done either using .NET or HTML5. Both systems have their own wrapper around the underlying WinRT infrastructure, hiding the implementation details. The CLR is unchanged; it's still the .NET 4 CLR, running IL in .NET assemblies. The thing that changes between desktop and Metro is the class libraries, which have more in common with the Silverlight libraries than the desktop libraries. In Metro, although all the types look and behave the same to callers, some of the core BCL types are now wrappers around their WinRT equivalents. These wrappers are then enhanced using standard .NET types and code to produce the Metro .NET class libraries. You can't simply port a desktop app into Metro. The underlying file IO, network, timing and database access is either completely different or simply missing. Similarly, although the UI is programmed using XAML, the behaviour of the Metro XAML is different to WPF or Silverlight XAML. Furthermore, the new design principles and touch-based interface for Metro applications demand a completely new UI. You will be able to re-use sections of your app encapsulating pure program logic, but everything else will need to be written from scratch. Microsoft has taken the opportunity to remove a whole raft of types and methods from the Metro framework that are obsolete (non-generic collections) or break the sandbox (synchronous APIs); if you use these, you will have to rewrite to use the alternatives, if they exist at all, to move your apps to Metro. If you want to write public WinRT components in .NET, there are some quite strict rules you have to adhere to. But the compilers know about these rules; you can write them in C# or VB, and the compilers will tell you when you do something that isn't allowed and deal with the translation to WinRT metadata rather than .NET assemblies. It is possible to write a class library that can be used in Metro and desktop applications. However, you need to be very careful not to use types that are available in one but not the other. One can imagine developers writing their own abstraction around file IO and UIs (MVVM anyone?) that can be implemented differently in Metro and desktop, but look the same within your shared library. So, if you're a .NET developer, you have a lot less to worry about. .NET is a viable platform on Metro, and traditional desktop apps are not going away. You don't have to learn HTML5 and JavaScript if you don't want to. Hurray!

Read the article

WordPress SEO Plugins to make your Blog Search Engine Friendly

- by Vaibhav

WordPress is the most common blogging system in use today and its use as a CMS is also wide spread. With hundreds of millions of sites using wordpress, getting correct SEO for your WordPress based Blog or Site is very important. We get regular queries from people who want Search Engine Optimisation for their site or blog which is made using wordpress. Here is a list of 16 of the best WordPress Plug-ins That can help you achieve better rankings: All in one SEO Pack This is most popular plugin among all SEO plugins for WordPress. It is easy to use and is compatible with most of the WordPress plugins. It works as a complete package of SEO plugin – automatically generating META tags and optimizing search engines for your titles and avoiding duplicate content. You can also include META tags manually (Met title, Meta description and Met keywords) for all pages and post in your website. HeadSpace2 HeasSpace2 is available in different languages , you can manage a wide range of SEO Tasks related with meta data, you can tag your posts, Custom descriptions and titles. So your page can rank the created relevancy on Search engines and you can load different settings for different pages. Platinum SEO plugin Automatic 301 redirects permalink changes, META tags generation, avoids duplicate content, and does SEO optimization of post and page titles and a lots of other features. TGFI.net SEO WordPress Plugin It’s a modified version of all-in-one SEO Pack. It has some unique feature over All-in-one SEO plugin, It generate titles, meta descriptions and meta keywords automatically when overrides are not present. Google XML Sitemaps Sitemaps Generated by this tool are supported by Google, Yahoo, Bing, and Ask. We all know Sitemaps make indexing of web pages easier for web crawlers. Crawlers can retrieve complete structure of site and more information by sitemaps. They notify all major search engines about new posts every time you create a new post. Sitemap Generator You can generate highly customizable sitemap for your WordPress page. You can choose what to show and what not to show, you can list the items in your choice of orde. It supports pages and permalinks and multi-level categories. SEO Slugs They can generate more search engine friendly URLs for your site. Slugs are filename assigned to your post , this plugin removes all common words like ‘a’, ‘the’, ‘in’, ‘what’, ‘you’ from slug which are assigned automatically to your post. SEO Post Links This is a similar plugin to SEO Slug, it removes unnecessary keywords from slug to make it short and SEO friendly and you can fix the number of characters in your post. Automatic SEO links With this tool you can create auto linking in your post. You can use this tool for inter linking or external linking too. Just select your words, anchor text target URL nature of links ( Do fallow / No follow ). This plugin will replace the matches found in post, WP Backlinks A helpful plugin for link exchange , whenever any webmaster submits a link for link exchange, the plugin will spider webmasters site for reciprocal link, and if everything is found good , your link will be exchanged. SEO Title Tag You can optimize your Title tags of Word press blog through this plugin . You can also override the title tag with custom titles , mass editing and title tags for 404 pages which are the main feature of this plugin. 404 SEO plugin With this Plugin you can customize 404 page of your site; you can give customized error message and links to relevant pages of your site. Redirection A powerful plugins to manage 301 redirection and logs related with redirection, with this plugin you can track 404 errors and track the log of all redirected URLs , this plugin can redirect post automatically when URL changes for that post. AddToAny This plugin helps your readers to share, save, email and bookmark your posts and pages. It supports more than a hundred social bookmarking , networking and sharing sites. SEO Friendly Images You can make SEO friendly images available on your site with the help of this tool. It updates images with proper titles and ALT tags. Robots Meta A plugin which prevents Search engines to index comments on your post, login and admin pages. It also allows to add tags for individual pages.

Search Results

Search found 7634 results on 306 pages for 'preg replace'.

Page 269/306 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276 | Next Page >

- by Paul Haldane

- by sparkyuiop

- by Ones and Zeroes

- by Matthew Guay

- by ScottGu

- by Asian Angel

- by Benjamin Roux

- by faizanahmad

- by mbridge

- by Marco Russo (SQLBI)

- by Ben Griswold

- by sachin

- by sreejukg

- by carestad

- by Mala Narasimharajan

- by Rick Strahl

- by Asian Angel

- by Rick Strahl

- by Vincent Maverick Durano

- by RonGarlit

- by Geoff N. Hiten

- by Chris Hoffman

- by Simon Cooper

- by Vaibhav

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276 | Next Page >