Search Results

Search found 8233 results on 330 pages for 'unresolved external'.

Page 267/330 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >

• Sonicwall TZ210 - Set up public wifi on separate subnet & interface

  - by thomasjbarrett

  I want to set up a public wifi by connecting another router to the X6 interface, and put it on a separate subnet (192.168.10.0/24) & in the DMZ Zone to keep it away from the regular LAN. I believe I have the network settings correct: the router has acquired the IP and DNS information from the TZ210, and the TZ210 shows it as an active DHCP lease. X6 is in the DMZ. I now have a routing/NAT/firewall problem, since I can't get any traffic to travel from the subnet to the internet. I can't get to any external websites and can't ping the TZ210 from the subnet. X0 is the regular LAN, and X1 is the WAN. Looking for any tips or tutorials on this. Here's my current relevant rules: Routing Source: X6 Subnet Destination: Any Service: Any Gateway: Default Gateway Interface: X6 Source: Any Destination: X6 Subnet Service: Any Gateway: 0.0.0.0 Interface: X6 NAT Policies Source Original: Any Translated: WAN IP Destination Original: Any Translated: Original Inbound: X6 Outbound: X1 Source Original: Any Translated: U0 IP Destination Original: Any Translated: Original Inbound: X6 Outbound: U0 Firewall DMZ LAN : Deny All DMZ WAN : Allow All LAN DMZ : Allow All WAN DMZ : Allow All

  Read the article

• Referencing groups/classes from Puppet dashboard in my site manifest

  - by Banjer

  I'm using Puppet Dashboard as my ENC and I'm not sure how to reference or use class and group classifications from /etc/puppet/manifests/site.pp. I have two groups defined in the dashboard: CentOS6 and SLES11. What should my site.pp look like if I want to include a certain list of modules in the CentOS6 group and a certain list of modules in the SLES11 group? I'm trying to do something like this: # /etc/puppet/manifests/site.pp node basenode { include hosts include ssh::server include ssh::client include authentication include sudo include syslog include mail } node 'CentOS6' inherits basenode { include profile } node 'SLES11' inherits basenode { include usrmounts } I have OS-specific case statements within my modules, but there are some modules that will only be applied to a certain distro. So I suppose I have two questions: Is this the best way to apply modules/resources in an OS-specific manner? Or does the above make you want to vomit? Regardless of #1, I'm still curious as how to reference classes, groups, and nodes from Dashboard within my manifests. I've read the External Nodes doc, but I'm not seeing how they correspond to manifests. Thanks all.

  Read the article

• Blu-ray BD-R: Would you physically store it in a CaseLogic Wallet pocket?

  - by Rob

  I keep several backup copies of my material and files. For my DVDs, one set of copies is kept in a CaseLogic wallet folder pack, so that I can easily move this around when visiting friends, family or for business. This is highly convenient. The other sets are kept in their jewel cases in hard plastic see thru storage boxes. Although CaseLogic wallet material is designed to be abrasion free, their caveat is that external dust will be the cause of any blemishes. If hard dust gets in these pockets, which is inevitable, this will occasionally cause light hair like scratches on the disc surface as the discs are removed and returned for access to their contents. This is of no consequence as the laser and error correction can more than cope with this. I'm aware that the blu-ray spec requires anti-scratch in disc surfaces but was wondering that, given the smaller pits, would dust and light scratches from wallet storage cause more problems with blu-rays than they would with DVDs? I'm using Blu-ray BD-R and BD-R DL write once media.

  Read the article

• ASP.NET sending email through exchange problem

  - by Solmead

  I have an exchange 2010 server running on Windows 2008 R2, I also have a remote webserver running Windows 2003 with multiple sites on it (all asp.net mvc 2 sites). I setup a Transport in exchange and all the websites on my remote web server can send email no problem to anyone in the exchange server and to any external domain. Now for my problem. I am having issues with that webserver, so I moved one of the websites to run on my exchange server, it runs well (low hit website) except that email doesn't work from that site. I tried changing the Transport in exchange to add the IP address of the local machine and the 127.0.0.1 addresses and it still isn't sending any email. Any ideas on how to get this working? The remote websites can still send email no problem, the version of the site that I had to move on the remote server can still email, but on the exchange server for that website email does not send. I would guess it is a Transport issue, since it is running on the same server a firewall shouldn't be the issue. I changed the smtp setting in web.config to localhost, and now I do receive email to my account on the exchange server, but I do not receive any emails on outside addresses. To add more description, this is a custom developed asp.net mvc 2 website. And no errors were being generated in the code when sending the email in either case.

  Read the article

• exFAT to NTFS formatting troubles

  - by user1083734

  I recently ran a chkdsk on 2.5" 230GB SATA HDD but the plug was pulled before the end of the chkdsk and since then it wouldn't boot up. Deciding to scrap all data on the HDD (no longer needed it), I then fitted it into an external HDD caddy and (in diskpart) cleaned the disk, created new partition and volume and tried to format it to NTFS. It couldn't do this on long or short formats and so I went with the less-appreciated alternative - exFAT (I run Win7). It quick formats to exFAT fine but encounters errors during long format. At the moment it is exFAT. Of course I would really like it to be NTFS as I will probably need to use it on Win XP too. Could anyone suggest a method of trying to reformat to NTFS? Do you think that, when chkdsk was interrupted first time, the disk was corrupted and is irretrievable? I find this situation slightly odd, as it HAS formatted to exFAT and DOES seem to work when I copy files across! Also, I CAN use disk management console to create several partitions: e.g. a 50GB partition and then a large 180GB partition. The 50GB and WILL long-format to NTFS but the 180GB will not! I'm thinking hardware fault, but then I notice that it WILL format to exfAT! Much confusion!

  Read the article

• Run command remotely on Windows computer from C#

  - by Bilal Aslam

  I have a Windows Server 2008 instance on Amazon EC2 (Amazon's cloud compute platform, which provides VMs in the cloud). It has an external IP, and I have an admin account on the box. I would like to 'bootstrap' this instance remotely i.e. I want to run commands to download, install and configure apps on it, all without having to log on even once. Also, I cannot use psexec on the source computer. I have figured out how to do this to a remote, domain-joined computer using WMI. However, I have NOT been able to do for a remote computer on EC2. Here are some specific restrictions: 1) The remote computer is not part of my domain, hence no Kerberos 2) The remote computer does not have a cert I trust, or vice versa I am sure I am running into to some auth/trust restriction. Is there any way I can run a single command on the remote, given that I have admin privileges? I'm not tied down to using WMI, but I do need to run a command somehow. Feels like this should be a solved problem.

  Read the article

• Optimal file system type and mount options for an rsnapshot dedicated drive

  - by Nimmy Lebby

  We have an external USB 2 drive that we are using as a backup drive for our configuration. We use rsnapshot for the backups. It uses a few standard commands for managing snapshots: rm -rf: deletes expired snapshots mv: moves older snapshots down a slot cp -al: duplicates last snapshot to new slot rsync -a --delete --numeric-ids --relative: synchronizes new snapshot As you could see by the log below, the majority of the time is spent on the rm -rf and the cp -al steps: [25/Dec/2010:14:00:02] rsnapshot hourly: started [25/Dec/2010:14:00:02] echo 21012 > /var/run/rsnapshot.pid [25/Dec/2010:14:00:02] rm -rf /mnt/extdrive/snapshots/hourly.5/ [25/Dec/2010:14:15:48] mv /mnt/extdrive/snapshots/hourly.4/ /mnt/extdrive/snapshots/hourly.5/ [25/Dec/2010:14:15:48] mv /mnt/extdrive/snapshots/hourly.3/ /mnt/extdrive/snapshots/hourly.4/ [25/Dec/2010:14:15:48] mv /mnt/extdrive/snapshots/hourly.2/ /mnt/extdrive/snapshots/hourly.3/ [25/Dec/2010:14:15:48] mv /mnt/extdrive/snapshots/hourly.1/ /mnt/extdrive/snapshots/hourly.2/ [25/Dec/2010:14:15:48] cp -al /mnt/extdrive/snapshots/hourly.0 /mnt/extdrive/snapshots/hourly.1 [25/Dec/2010:14:23:32] rsync -a --delete --numeric-ids --relative /etc /mnt/extdrive/snapshots/hourly.0/sm4/ [25/Dec/2010:14:23:52] touch /mnt/extdrive/snapshots/hourly.0/ [25/Dec/2010:14:23:52] rm -f /var/run/rsnapshot.pid [25/Dec/2010:14:23:52] rsnapshot hourly: completed successfully My questions: I'm currently using ext4 for the filesystem. Maybe this is not the best choice from those available in Red Hat. Anyone have any recommendations that would speed up the process? The partition's mount options are sync,dirsync 1 2. Is there a way to optimize this since it's solely used for rsnapshot? Of course, reasoning would be greatly appreciated.

  Read the article

• Suggestions for accessing SQL Server from internet

  - by Ian Boyd

  i need to be able to access a customer's SQL Server, and ideally their entire LAN, remotely. They have a firewall/router, but the guy responsible for it is unwilling to open ports for SQL Server, and is unable to support PPTP forwarding. The admin did open VNC, on a non-stanrdard port, but since they have a dynamic IP it is difficult to find them all the time. In the past i have created a VPN connection that connects back to our network. But that didn't work so well, since when i need access i have to ask the computer-phobic users to double-click the icon and press Connect i did try creating a scheduled task that attempts to keep the VPN connection back to our office up at all times by running: >rasdial "vpn to me" But after a few months the VPN connection went insane, and thought it was both, and neither, connected an disconnected; and the vpn connection wouldn't work again until the server was rebooted. Can anyone think of a way where i can access the customer's LAN that doesn't involve opening ports on the router needing to know their external IP customer interaction of any kind Blah blah blah use vpn vnc protocol has known weaknesses you are unwise to lower your defenses it's not wise to expose SQL Server directly to the internet you stole that line from Empire Customer doesn't care about any of that. Customer wants things to work.

  Read the article

• Warning for "Reallocated Event Count" S.M.A.R.T. attribute with a new/unused drive. How serious is t

  - by Developer Art

  I've just looked at the health status of my old 2,5 inch 500 Gb Fujitsu drive with a popular "HD Tune" utility. It shows a warning for the "Reallocated Event Count" property. How serious is that? The thing is that the drive is practically new. I pulled it out of a new laptop over a year ago and never used it since. Right now it only has 53 "Power On" hours which sounds about right since I only had it running a few evenings overnight before switching it for something more performant. Does this warning indicate that the drive is likely to fail some time in the future? I'm somewhat perplexed since the drive is effectively unused. What is more, I have arranged with somebody to buy off this drive since I don't really need. It is 12,5 mm thick (with 3 plates) meaning it doesn't fit into an external enclosure which makes it quite useless to me. Can I give away the drive without having it on my conscience or better cancel the deal? In other words, can the drive be used safely for years to come or better throw it away? I'm running a sector test now to see if there are any real problems. Will post the results as soon as they're available.

  Read the article

• permanent NAS-mount in Ubuntu - wrong fs type, bad option, bad superblock

  - by Emil

  My network drive shows up in the file browser, just like my external usb-harddrive. Moving, running and editing files works. Hovering over it shows smb://lacie-2big/nasdisk . BUT, when I want to save a file, the drive doesn't come up as an option. All I can see is my other places, including my usb-harddrive. I am a complete newbie but I am GUESSING that it has something to do with the mount not being a "real" mount but just a shortcut to the smb location. So I ran the tutorial at https://wiki.ubuntu.com/MountWindowsSharesPermanently about how to "mount a network drive permanently". edited my fstab to //LaCie-2big/nasdisk /media/nasmount cifs guest,uid=1000,iocharset=utf8,codepage=unicode,unicode 0 0 and running sudo mount -a gave me the following error: mount: wrong fs type, bad option, bad superblock on //LaCie-2big/nasdisk, missing codepage or helper program, or other error (for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount. helper program) In some cases useful info is found in syslog - try dmesg | tail or so Now thats a very helpful error message, BUT, before I go any further, I'd be really thankful if one of you could tell me if I'm even in the right ballpark, or if my actual need: to be able to download files (ie torrents) directly to the drive, can be possible as it is already. Question: How to fix "wrong fs type, bad option, bad superblock on //LaCie-2big/nasdisk, missing codepage or helper program" when running mount -a

  Read the article

• Looking for an application that scrolls or pans netbook screens running Windows

  - by Rob

  I'm looking for a Windows 7 and XP compatible Windows desktop panning/scrolling tool. This is to solve a problem where some applications for example MSN have settings/preference Windows that are not resizeable. I have a Netbook with a small maximum screen resolution e.g. 1024x600. The fixed non-resizeable windows are too large for this display screen size so I cannot see all of the items on these windows, particularly the OK button to save settings. What I would like is a desktop scrolling/panning tool where if I move my mouse pointer to any edge of the display, it pans to show the region of the too-large-fixed window that I could not see. I use a Samsung N110 and Toshiba NB100 netbooks. I'm looking for: A general program that provides desktop panning/scrolling/expanded resolution to allow all regions of a non-resizeable fixed window Preferably a non-graphics hardware specific program but will accept a solution that works with both the above machines I'm NOT looking for (i.e. unsatisfactory answers others have asked that I've already searched and found): Advice on what programs to use that DON'T have the problem of fixed windows Alternative operating system solutions Plugging in an external monitor with larger resolution - I use this option but I need a solution when one is not available, e.g. while travelling etc Advice about not using small screen netbooks - I enjoy the compact convenience of them Advice about change the dpi settings in the Control Panel Display settings Advice about guesswork with the tab key to move the focus the off-screen item I cannot see Thank you in advance.

  Read the article

• Linux Uninstalling errors

  - by Zack

  I want to uninstall back-track 5 so I deleted the partitions for back-track os. After deleting the partition that used to be for back-track becomes free space as in picture. But I can't delete that partition nor creating a new partition. I used G-Parted from hiren boot cd but it says there is no partition table, you need to create a partition table. But actually I have 5 partitions already. And I thought of restarting might fix it. But after showing post screen my laptop show grub error. I don't know what to do, and I tried to install back-track again to fix the problem but it also says that i do not have any partitions. I can only boot windows by passing through hiren boot cd. But most of the time My computer is not recognizing the external dvd drive, nor the internal so i have to restart again and again, hoping to catch the time computer recognize the dvd drive. Can I change the boot loader to correct the grub error? SOLVED : I have solved the grub error by writing MBR again by using EasyBCD But I still have the format error.

  Read the article

• How do I configure custom URL handlers on OS X?

  - by cwd

  I've been reading a lot online about custom URL handlers / custom protocol handlers such as: Launching External Applications using Custom Protocols under OSX OS X URL handler to open links to local files I get that you can tell the system that a particular program is able to handle a certain scheme / protocol with the Info.plist file: <key>CFBundleURLTypes</key> <array> <dict> <key>CFBundleURLName</key> <string>Local File</string> <key>CFBundleURLSchemes</key> <array> <string>local</string> </array> </dict> </array> <key>NSUIElement</key> <true/> But if there are multiple applications that are capable of opening the same URL handler, such as mailto: how do you specify which one you want the system to use? There were some references to utilities like the More Internet preference pane which no longer seems to be available from the author's site. I did find it online by Googling but it seems a bit shaky - like it was written for an older OSX - perhaps Tiger. I haven't been able to find information on how to set the URL handler for protocols and custom protocols. I'm assuming there is a plist file somewhere that I can edit - or maybe there is a newer, better utility that works well with Mountain Lion?

  Read the article

• How to move a sata drive to a machine without AHCI mode

  - by Andrew Cooper

  I've got a Dell Inspiron 1545 on which the screen has died. I'm able to plug an external monitor into the Inspiron 1545 and it works fine, so the screen is the only issue. The OS is Win7. I'm trying to move the disk to a spare Dell Precision M90 laptop that I've got lying around. The problem is that almost as soon as the Windows logo appears in the boot sequence I get a BSOD with a STOP 0x0000007B message. Researching this message pointed to issues with SATA AHCI mode. I looked in the BIOS of the Inspiron 1545 and the controller was set to AHCI mode. I set it to ATA mode and tried to boot with the same drive and got the same result as on the Precision M90. Switching back to AHCI allowed the machine to boot correctly again. I checked the BIOS on the Precision M90 and it doesn't seem to support AHCI mode, although it is a SATA controller onboard. The BIOS is the latest A08 version available from Dell. Is there any way I can get this drive to boot in the M90 without reformatting it?

  Read the article

• Photoshop CS6 Corrupted File recovery

  - by Ben Franchuk

  Last night I was working on a client application mock-up in photoshop, but was goin to take a break from my work so I saved the .PSD file on my internal HDD and put my computer into stand-by mode once the file had finished saving. Unfortunately my computer crashed while it was entering stand-by and shut itself down (photoshop was still open). I did not boot it again to make sure all my files were ok because they had already been saved, but today once I opened up the file again it was extremely corrupted and also completely un-editable (screenshot bellow). so what im asking is there any way to recover my work, or at least some of it? i have put in a good few days work on this project and would hate to have to restart it. the size of the file is 3070 KB, even though it reads as 712 KB in photoshop. i dont know if these file sizes are larger or either smaller than the original non-corrupted file's size, but considering all the layers in the file i suspect it was larger before it corrupted. im using windows XP professional 32bit SP3. both my OS and said .PSD file are located on the same internal HDD (74.4 GB). i do have an external HDD (1.5 TB) but i primarily only use it for movies music and tv shows. i dont know if it was plugged in t the time of me editing the document last, though, if it means anything. i have tried many image and PSd recovery softwares but none have returned any results that may help recover my work. edit: i tried using a photo reccovery software (odboso Photorecovery) that actually seems to recover the corrupted file in question judging by the size of the file, but i cannot recover it because of the licence fee. knowing that the file is still likely on my HDD, what location might it be located?

  Read the article

• X.org - mouse gets stuck on press

  - by grawity

  I'm using Arch Linux. Very often, when I click on something, the OS thing sees the mouse press but not the release. If it was a link or file I clicked, moving the cursor would drag it too. Hammering the same mouse button again gives no effect. Usually, if I tap the touchpad (ALPS), the system finally sees both press and release of that, and I can continue working. (This might be because it uses a different driver - synaptics instead of evdev.) As you can imagine, this is quite annoying even for someone who spends 70% of his life in front of a terminal app. This is not a mouse issue - I'm on a laptop, and this affects both the Trackpoint thing and an external USB mouse. This is not a DE or window manager issue - I have used GNOME (with Metacity, Compiz and Xfwm4), Xfce (with Metacity and Xfwm4), mwm, twm, awesome, and wmii. Doesn't seem to be a hardware thing - after rebooting into Windows XP, everything works fine. hal is used for the auto-configuration of devices (as I have to disconnect the USB mouse often), so Xorg.conf really has nothing of relevance. Xorg -version shows: X.Org X Server 1.6.3.901 (1.6.4 RC 1) Release Date: 2009-8-25 X Protocol Version 11, Revision 0 If it changes anything, the laptop is stone-age Dell Latitude C840. I kinda suspect either hal or the evdev thing to cause it, but I really have no ideas on what to check further. In other words, HALP!#$ This thing is driving me nuts.

  Read the article

• DNS issue for internal website routing internet connection from remote location

  - by Michael Paul

  I have an issue that I could use some help with. Our company has a main location and a remote location. Previously, the remote location was connected to the main location through an internet connection VPN tunnel. The connection was pitifully slow at 1.5Mbps, so we upgraded it with a 75Mbps direct link. That meant the remote location lost it's internet access, so we routed their access through the main office internet connection. Everything works perfect except for one thing. The website we host is not accessible from the remote location unless the IP address is used. If I do NSLOOKUP on our website address from a machine connected to the main location network, it resolves correctly to the inside IP address. However, if I do the same from a remote location machine, it resolves to the website's outside IP address. Our internal DNS server(s) have a pointer and CNAME records set up, and everything was working perfectly before the connection was upgraded. In addition, the remote location has a domain controller, DNS server and DHCP server to service these requests at the remote location and prevent these requests from getting routed back and forth over the link. So I think was it happening is that for some reason the DNS server at the remote location is not resolving our website name correctly and passing the requests on to the routers, which then push the request out to the internet DNS system. That resolves the name to our external IP. This is purely a DNS issue, everything else works just fine. I am just stumped on this one. Any ideas on how to fix this? Edit: I forgot to mention that at the remote side of the link is a Cisco ASA-5505 and at the main office there is a Cisco ASA-5510. The link is connected between these 2 devices and the routing is handled in the 5510. Thanks, Michael

  Read the article

• CDROM does not appear on desktop, MACOS 10.5.7

  - by Cheeso

  When I pop a CDROM into the drive of my Macbook Pro, It spins up, I hear it, but no icon appears on the desktop. (I think it's 10.5.7; actually not sure how to verify this on Mac, but I think I saw a 10.5.7 flash by somewhere). In the finder preferences, I have "Show these items on the Desktop" set to show HDs, External Disks, and CDs, DVDs, and ipods. All three of those are checked. I do see the internal HD on the desktop. In Disk utility I can see the CD/DVD hardware. It says "MATSHITA DVD-R UJ-857E...". From Disk Utility I can eject the drive. But in Finder, there is never a CD/DVD listed under "Devices". When I insert a disk, nothing happens, I cannot see it. I also cannot boot from bootable CDROMs by holding C down . Suggestions? I am not very experienced with Mac; I have used Windows for years. EDIT Two updates: I saw this article on support.apple.com, and modified the hostconfig appropriately. It did not have the AUTODISKMOUNT entry, so I added one, rebooted. Same behavior. It does not see the CDROM in Finder, does not mount it on desktop. I put an old manufactured CDROM into the drive, and voila! it showed up on the desktop. The CD that does not appear is a GNome Partition Editor Live CD, which I guess is based on debian. That CD boots in other (non-Mac) PCs. I want to use this to adjust the Bootcamp partition. Suggestions?

  Read the article

• Local DNS and Apache Server Configuration Interferring - example.com / www.example.com

  - by nicorellius

  I have a domain for my site: example.com I am also running local DNS with these lines: www IN CNAME server.<host_provider>.com. dev IN CNAME server.<host_provider>.com. So www.example.com and dev.example.com go to production and development sites, respectively, that are hosted by a host company. In my Apache configuration for the main site, I'm running a rewrite rule like this: RewriteEngine ON RewriteCond %{HTTP_HOST} ^example\.com$|!dev\.example\.com$ [NC] RewriteRule ^(.*)$ http://www\.%{HTTP_HOST}/$1 [R=302,L,NE] This rule seems to work, as when you are off the network and go to example.com in the browser, you get redirected to www.example.com. The problem is when I'm on the network, and I go to example.com I get an error page, saying page can't be found. No server errors; just a page can't be found, as if the local DNS is causing it to stop looking at that point. I'm also using Nettica for DNS service and have this A record in place: example.com Host (A) Default xxx.xx.xxx.xx This handles the external DNS, but my problem seems to be related to my internal DNS. For example, inside my network, I can go to servers on the network with addresses like this: server.example.com server1.example.com server2.example.com These are configured in my local DNS. I'm just not sure how to get past the "empty" subdomain and go to example.com. Adding to this since it might not be clear. If I'm out side the example.com network, on another network, like example123.com, then when I go to example.com I'm redirected to www.example.com as expected, eg, the Apache rewrite rule is working. Thanks in advance for any information.

  Read the article

• "Safely remove hardware"...doesn't.

  - by Kev

  I have an external USB harddisk that I have scripted to safely shut down after a backup, so the backup operator can unplug it, and knows not to if the lights are still on for some reason. It's always worked fine using the DevEject command-line utility. This week it failed for some reason: DevEject 1.0 2003 c't/Matthias Withopf Ejecting 'USB Mass Storage Device' [USB\VID_0411&PID_002A\00000704C8D2]...FAILED (23,5) Error ejecting device USB Mass Storage Device, vetoed (15,5)! Worse yet, using the SRH tray icon, I click Stop, click OK, it pauses about 5 seconds with OK and Cancel greyed out, closes the sub-window, and then the main window with the Stop button still shows the device, and Stop is still available. I can keep doing that and it never gets rid of the device. I can still access it in Explorer. LockHunter reports that nothing is locking the drive. I've made no changes to the backup configuration or anything to do with the drive this week. Why the sudden flake-out? Short of a restart, which I can't do today before the backup operator goes home, how do I fix it?

  Read the article

• I have added a port to the public zone in firewalld but still can't access the port

  - by mikemaccana

  I've been using iptables for a long time, but have never used firewalld until recently. I have enabled port 3000 TCP via firewalld with the following command: # firewall-cmd --zone=public --add-port=3000/tcp --permanent However I can't access the server on port 3000. From an external box: telnet 178.62.16.244 3000 Trying 178.62.16.244... telnet: connect to address 178.62.16.244: Connection refused There are no routing issues: I have a separate rule for a port forward from port 80 to port 8000 which works fine externally. My app is definitely listening on the port too: Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:3000 0.0.0.0:* LISTEN 99 36797 18662/node firewall-cmd doesn't seem to show the port either - see how ports is empty. You can see the forward rule I mentioned earlier. # firewall-cmd --list-all public (default, active) interfaces: eth0 sources: services: dhcpv6-client ssh ports: masquerade: no forward-ports: port=80:proto=tcp:toport=8000:toaddr= icmp-blocks: rich rules: However I can see the rule in the XML config file: # cat /etc/firewalld/zones/public.xml <?xml version="1.0" encoding="utf-8"?> <zone> <short>Public</short> <description>For use in public areas. You do not trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.</description> <service name="dhcpv6-client"/> <service name="ssh"/> <port protocol="tcp" port="3000"/> <forward-port to-port="8000" protocol="tcp" port="80"/> </zone> What else do I need to do to allow access to my app on port 3000? Also: is adding access via a port the correct thing to do? Or should I make a firewalld 'service' for my app instead?

  Read the article

• Alternative software for Pinnacle PCTV 100e

  - by Stijn Sanders

  I have a Pinnacle PCTV 100e external USB cable television receiver. I've been using Pinnacle's software that came with the card (TVCenter Pro) to record things at given times. Things I don't like is an extremely high CPU load, and that it doesn't seem to halt the screensaver from running when watching in full screen. Also, I was away the last two weeks, and the schedules went terribly bust. Some items were recorded hours before or after the actual scheduled time (and now I missed some shows), and some recurring schedules weren't converted into the next occurrence correctly! Is there good alternative software that would work with my PCTV 100e? (Preferalby cheap or free) I've tried VLC Player, which gets video, but no audio. I've tried MediaPortal, which crashes when trying to scan for channels. When I select a channel manually, the stored mpg has big errors in encoding and is also missing audio. There's VirtualDub, but that doesn't have ready-made scheduled-recording options. This I can conjure some scheduled scripts for, but I've noticed the sync gets awfully wrong after some time. I've tried Windows Media Center, but it doesn't seem to support the PCTV 100e.

  Read the article

• Bypass proxy authentication [closed]

  - by Diego Queiroz

  My scenario: My network has a proxy that requires interative authentication. When I access any URL, an username and password is requested to enable navigation. I do have a valid username/password (this means I have permissions to access external content). I do not have access to the proxy server (any change to the proxy server is not an option). What I need: I need to bypass the interative authentication process and make it an automated authentication process. What I do NOT need/want: I do not need/want to hack the network. I do not need/want to access unauthorized content. In other words, I just need to find a way to "save" my password in the computer (security is not a problem) to allow application that does not support this kind of interative authentication to access the internet (like non-browser software that also uses HTTP port). My guess: My guess is to develop a new proxy server that will run in the local machine (eg, a proxy for the network proxy). This proxy server will access my network proxy, authenticate and forward the content. Of course this is a last resort. I prefer to not need to develop a proxy server. Does someone know other solution? (any operating system)

  Read the article

• Using GUI ftp on Win7 and Vista without additional software

  - by Stephen Jones

  Goal: provide a 'no-software' method for 'less technical' users to access password protect ftp location from Win7 and Vista (existing approach for WinXP works). 'No software' method to mean without installing additional software (e.g. FileZilla, WinSCP) - the solution is supplied to external non-technical users. WinXP (works): Using Windows Explorer, WinXP supports non-technical ftp access by pasting: ftp://username:[email protected] into the address bar. The remote ftp site's files / directory structure becomes available and can be copied to / from easily (in the style of local file copy / paste) by a 'less technical' user. Win7 / Vista (doesn't work): Pasting the same URL into the Windows Explorer on Win7 or Vista causes an error: An error occurred opening that folder on the FTP server. Make sure you have permission to access that folder. Details: The connection with the server was reset. Notes: a) The same username/password/server typed from the (DOS) command line achieves access to the server, but this is a more 'technical' solution than desired. I am looking for a WinXP equivalent solution. b) Under 'Control Panel' / 'Internet options' / 'Advanced' tab - the boxes for 'Enable FTP folder view' and 'Use Passive FTP' are ticked (enabled) c) Adding an inbound firewall rule for local port 20 (TCP) was attempted with no difference in results (i.e. failure)

  Read the article

• Redirect local, not internal, requests using SuSEfirewall2 or an iptables rule

  - by James

  I have a server that is running a web application deployed on Tomcat and is sitting in a test network. We're running SuSE 11 sp1 and have some redirection rules for incoming requests. For example we don't bind port 80 in Tomcat's server.xml file, instead we listen on port 9600 and have a configuration line in SuSEfirewall2 to redirect port 80 to 9640. This is because Tomcat doesn't run as root and can't open up port 80. My web application needs to be able to make requests to port 80 since that is the port it will be using when deployed. What rule can I add so that local requests get redirected by iptables? I tried looking at this question: How do I redirect one port to another on a local computer using iptables? but suggestions there didn't seem to help me. I tried running tcpdump on eth0 and then connecting to my local IP address (not 127.0.0.1, but the actual address) but I didn't see any activity. I did see activity if I connected from an external machine. Then I ran tcmpdump on lo, again tried to connect and this time I saw activity. So this leads me to believe that any requests made to my own IP address locally aren't getting handled by iptables. Just for reference he's what my NAT table looks like now: Chain PREROUTING (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere anywhere tcp dpt:http redir ports 9640 REDIRECT tcp -- anywhere anywhere tcp dpt:xfer redir ports 9640 REDIRECT tcp -- anywhere anywhere tcp dpt:https redir ports 8443 Chain POSTROUTING (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >