Search Results

Search found 8959 results on 359 pages for 'bad decisions'.

Page 268/359 | < Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >

• Windows 7 starts getting sluggish over a few days

  - by munrobasher

  Myself and the other developer are running Windows 7 Enterprise 64 bit with 8GB RAM on different Gigabyte motherboards with Quad core Intel CPUs. Most of the time, it runs like a dream. We use VMware workstation a lot (hence the 8GB) and that works well. Except... now and then, after the PCs have been on for a few days, the whole system starts getting really sluggish doing certain tasks. The other's developer's system is far worse than mine with it taking up to a minute to launch IE. Today, mine has gone sluggish but nowhere near as bad. For example, normally when I click on a new tab in IE, it's instant. Today, there's an obvious delay. Right-clicking in this window to trigger iSpell is normally instant, right now it takes about five seconds. I've got resource monitor open on my second monitor and when I did that right-click, there was no obvious peak in CPU, disk or memory. A reboot does fix it so it does sound like a resource issue but haven't a clue what might be to blame. The two computers have similarities (same spec) but also differences (like motherboard, RAM & CPU models). So I guess the question is, any pointers on diagnosing why a PC is sluggish? What could cause such a right-click slow down in IE for example? It sounds like such a simple operation. NOTE: whilst typing this message alone, it was fine performance wise. I can click around the page no problem but right-click still is noticeable slow. Will reboot over lunch... Cheers, Rob.

  Read the article

• Connecting to same public IP from different locations yields different results

  - by DHall

  Since yesterday I've been unable to access one of my favorite time-wasting sites, boston.com. It starts to load but then it gets redirected to pagesinxt or something like that. After some investigation, I've narrowed it down to an issue with cache.boston.com, but only from my work location. I found the IP (216.38.160.107) , but even that doesn't work correctly from here at work. When I do a telnet 216.38.160.107 80 GET http://cache.boston.com/universal/css/hp_bgcom.css from another location, I get a nice long CSS, as expected. From here, I get an error (trimmed for size): HTTP/1.1 400 Bad Request Your request could not be processed. Request could not be handled This could be caused by a misconfiguration, or possibly a malformed request. For assistance, contact your network support team. Is there any way I can troubleshoot this further on my end? Tracert doesn't tell me anything too useful: Tracing route to vwrpx1.ttn.xpc-mii.net [216.38.160.107] over a maximum of 30 hops: 1 * * * Request timed out. Since it's not really work-related, I don't really want to bring it up to our network team unless I know what's going on, or if there's some risk to the network (ex. malware or something)

  Read the article

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• IP6 seems to be enabled - How do I configure it without interfering with IP4?

  - by Mister IT Guru

  I noticed that some of my Centos boxes have IP6 enabled, and seem to have addresses. I have no problem with this, but I would like to get a handle on it, and even connect to them using IP6. This would really help if for any reason DHCP has a hiccup. But I'm a bit lost as to where the configuration on my CentOS box is. (I am also on google researching this, but I like server fault! :) ) I am hoping that I would be able to log into this via the VPN because every now and then that DHCP device has a bad morning, and needs to be restarted. (I'm also looking into this issue, but someone else handles that, management separation gone mad!) It's a remote client, so it would be a lot easier for me to connect to these systems which seem to self configure, to use that as a pivot via ssh tunnels to get to other remote devices to continue to manage them, while out main route is fixed. I guess, my questions are How can I configure IP6 without interfering with IP4, and On CentOS, can I influence this auto configuration I seem to be seeing?

  Read the article

• Second monitor stopped being recognized by Windows

  - by Eric J.

  One of the developer PC's running Windows Vista Ultimate had the second monitor stop being recognized in Windows overnight. There were no hardware or driver changes at the time, though I have subsequently updated to the latest nVidia drivers (card is NVIDIA GeForce 210). The non-recognized monitor IS recognized during the boot sequence. In fact, only the "bad" one shows the POST or the Windows loading screen. At some point during Windows initialization after the loading screen disappears and before the logon screen appears, the active monitor switches. Any thoughts? UPDATE: When I open the Vista monitor properties window, I see my primary display and secondary display depicted. The primary one is portrayed as the regular blue box, but the secondary one is portrayed greyed-out. I have the option to "Extend desktop to this monitor", the only resolution is 800x600, and all of the advanced monitor properties are greyed out as well. If I opt to extend the desktop, the greyed-out box turns blue, when I then select Apply the screens flash as usual and I'm given the 15 second countdown to accept the new settings and when I do, everything returns to the previously broken state... secondary monitor is portrayed greyed-out again. At no point is the desktop shown on the secondary monitor.

  Read the article

• Family server setup [closed]

  - by Manny

  Hi all, I really hope some of you can give me some direction. I have setup a linux server at home and through samba I can access files from different computers in my home. I would like to use this server as a file-server for my family (brothers, sisters and parents who all live in their own homes). I really like the way it is set up right now with user and permission controls, but I've read that it is bad idea to open up the samba port to the world. The requirements are simple: 1) it should be easy to access, by using standard web browsers or mounting the drive (shouldn't have to use any VPN setup or use putty etc) 2) should be somewhat secure. We just want to share family pictures instead of putting them on facebook or picasa or other web server, nothing top secret. Here is what I've looked into: 1)Webdav. It seems decent but seems like it windows7 doesn't like it very much, even with digest mode authentication. User controls and permissions are not as flexible as samba (or at least to my knowledge). I really like the user and group permissions in samba, but if I could live with webdav if it worked seamlessly with windows, it should just work shouldn't it? 2) I read somewhere to stay away from ftp as it is outdated and that there are newer and better internet file-server setups? Was that a reference to webdav? I am so confused, please help... Manny

  Read the article

• SQL Server Installation: Is it 32 or 64 bit?

  - by CapBBeard

  Hi, Recently I was performing an OS upgrade on one of our DB servers, moving from Server 2003 to Server 2008. The DBMS is SQL Server 2005. While reinstalling SQL on the new Windows installation, I went to another of our DB servers to verify a couple of settings. Now, I always thought this second server was Server 2003 x64 + SQL 2005 x64 (from what I'd been told), but I now have my doubts about this. I now suspect that it is in fact only 32 bit SQL, however I'd like to verify this. Here's some details: The OS is definitely 64 bit. xp_msver shows Platform as NT INTEL X86 SELECT @@VERSION shows Microsoft SQL Server 2005 - 9.00.4035.00 (Intel X86)... However sqlservr.exe is not shown with '* 32' in taskmgr, does anyone know why this is the case, if it is in fact 32 bit as claimed? Despite this, it does seem to be running out of the x86 program files folder. If I do the same checks on a confirmed 64 bit installation, it does give back the expected 64 bit readings, which can only prove that this server in question is only running in 32 bit. Now, that being the case, the question arises about how much memory this '32 bit' install can use. Task manager reports about 3.5GB memory usage for sqlservr.exe (The server has 16GB physical). I suspect that AWE has not been configured at all, and therefore the server will be significantly under-utilised (remembering that the OS is 64 bit) if SQL is simply using a 32bit address space. Is this assumption correct? I feel the server should have SQL reinstalled as 64 bit in order to fully utilise the hardware platform, however it is currently heavily in production; this will be no easy task. I suspect we may just have to configure AWE correctly and let it be for the time being (Unless this is a bad idea?). I apologise that this question is a little vague/lost; I'm no SQL expert, just trying to get a handle on what's going on here.

  Read the article

• Perfectly reproducable select statement default ordering issue....

  - by Dave

  Hi, I've recently been chasing an issue with a client's db... solution found, but impossible to recreate. Essentially, we're doing a Select * from mytable where ArbitraryColumn = 75 Where MyTable has an Identity column, called 'MyIndentityColumn' - incremented by one in each insert. Naturally, and normally I would assume that the order returned would be the order in which they are inserted (bad assumption, but one which was forced onto me, through an inherited application - which has been patched). Essentially, I would like suggestions as to why the database, when restored to my local machine (same OS, same SQL server version - 200 sp3) same collation, and same backup instance restored on it, as a test DB on the client site. When I perform the above select, I get them in order of insert (i.e. identity column ordered ascending). On the client, it seems random (but the same 'random' order each time)... A few other points: I have the same collation on my test server as client Same DB backup restored to a test only I can access Same SQL server version and service pack Same OS Test DB is a new DB - new log and MDF... I have the problem 'solved' by adding an explicit order by clause but I want to undertand the cause of the issue, given the exact nature of my attempts to recreate it beuing futile, and perfectly recreatable on the client server... Thanks in advance, Dave

  Read the article

• What are the replacement options for an IDE hard disk for a DOS based system?

  - by dummzeuch

  I have got a few "embedded" systems running MSDOS 6.2 which boot from and store data to IDE hard disks. Since these drives are nearing their end of life, the question arises how we can replace them. The requirements are: DOS must be able to install and boot from these drives. They must be able to sustain heavy (mostly) write access. If possible, they should be able to survive moderate vibrations (not too bad since the current hard disks have survived several years of that) I considered the following options so far: other ide hard drives: Unfortunately modern IDE drives are too large so DOS cannot boot from them even if I create small partitions. Older IDE drives are just that: old, so they are probably not the most reliable ones any more. SSDs: There are a few SSDs with IDE interface available. I have not yet tried them. Does anybody have any experience with them? They look like the ideal replacement provided that DOS can boot from them and that writing speed does not deteriorate too much (the old hard disks are no race cars either). Compact Flash: There are adapters for using CF with IDE controllers and they work fine. DOS can boot from them and they have no problems at all with vibrations. What I am not sure about is their durability. DOS uses FAT so some very few sectors are written every time the medium is being written to. IDE to SATA converters: I have no idea whether they are any good. Has anybody tried them? It might be an option to use one of these to connect an SATA SSD to the system. Are there any alternatives that I have missed? (We are working on replacing these systems, but it will still take a few years.)

  Read the article

• Rebuilding LVM after RAID recovery

  - by Xiong Chiamiov

  I have 4 disks RAID-5ed to create md0, and another 4 disks RAID-5ed to create md1. These are then combined via LVM to create one partition. There was a power outage while I was gone, and when I got back, it looked like one of the disks in md1 was out of sync - mdadm kept claiming that it only could find 3 of the 4 drives. The only thing I could do to get anything to happen was to use mdadm --create on those four disks, then let it rebuild the array. This seemed like a bad idea to me, but none of the stuff I had was critical (although it'd take a while to get it all back), and a thread somewhere claimed that this would fix things. If this trashed all of my data, then I suppose you can stop reading and just tell me that. After waiting four hours for the array to rebuild, md1 looked fine (I guess), but the lvm was complaining about not being able to find a device with the correct UUID, presumably because md1 changed UUIDs. I used the pvcreate and vgcfgrestore commands as documented here. Attempting to run an lvchange -a y on it, however, gives me a resume ioctl failed message. Is there any hope for me to recover my data, or have I completely mucked it up?

  Read the article

• Automated Syslog Error Solution Finder

  - by Dru

  Any automated syslog solution finding frameworks? I want my central syslog server to email a list of problems, their severity and suggested solutions. There have been several questions about centralising system logs and alternative log analysis systems, but I don't get the impression that any of them help with issue resolution. A little background: At work I am now literally doing the work of two people, and both jobs have expanded beyond their initial frameworks. It is not so bad as I have helpers, but they are little more than smart monkeys. While one of my predecessors [I have two, that is how I know I have the jobs of two people] set-up logwatch to email its results out, my monkeys don't have the skills necessary to identify unimportant data. This has caused all of them, and myself sadly, to setup email filters and ignore the whole thing until something goes "bang". It would be handy to have someone else tell them what is important, what is connected, and to suggest a few ways to resolve the issue (I could train then to research the solution first, ha!). My reading of the Splunk and Octopussy sites indicates that I still need to bring my own highly trained monkey to the party. Which I am several years from having.

  Read the article

• Intermittently uncommunicative subnets

  - by mhd

  Last week proved me a veritable Cassandra: I've always said that it's a bad idea to have only one firewall/router, without a backup or failover. And thus our Cisco PIX went haywire, refusing to route properly. And of course, the only one available here on short notice is me, and while I'm quite grounded in Linux, I'm really a developer not a sysadmin (the fact that this hit me on sysadmin appreciation day is a bit ironic). Anyway, this weekend I tried to hack up a temporary solution: I used an old server with enough NICs (two built-in, four on a card) to serve as a gateway and firewall. Due to some problems with the raid controller, I got only two router distros running, and between Untangle and Ebox I decided for the latter. Now everything is quite okay. I've got all the different subnets we've got here (all with separate switches) talking to each other and even to the internet (Cisco 2800 router, T1 lines). But from time to time (20-60 minute intervals), I get a total routing failure. Our main, office subnet can't talk to our server subnet and can't connect to the internet. This is not the end of a gradual slowdown, either everything's working perfectly or I get a total lack of communication for about two minutes each time. Now I'm a bit at wits end what to check. At least with the default EBox setup, nothing in /var/log shows anything weird and it doesn't exactly have lots of built-in monitoring tools. So I'm hoping someone here could give me some pointers about what to look out for. I did change the ethernet cable from the office switch to the firewall, with no results. I might change switches, although within the switch it seems to work ok enough. Edit: I'm not sure whether this is the sole cause of the problem, but after I noticed a few DHCP entries just before the last drop of connectivity, I tried to reproduce that. And alas, whenever I renew a DHCP connection, I can't access other subnets anymore. Running ISC DHCPD 3.0.6.

  Read the article

• Nginx/puma rhel unix socket permission error?

  - by Kevin Brown

  When I try to start my puma server, I get the error: /.rvm/gems/ruby-2.1.1/gems/puma-2.9.0/lib/puma/binder.rb:275:in `initialize': Permission denied - connect(2) for "/var/run/nvhbase.sock" (Errno::EACCES) My sites-available/nvhbase.conf file: upstream nvhbase { server unix:/var/run/nvhbase.sock; } server { listen 80 default_server; server_name 207.131.132.219; root /home/vf032500/dev/nvh/public; location / { proxy_pass http://unix:/var/run/nvhbase.sock; proxy_http_version 1.1; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $connection_upgrade; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Proto https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } I don't know a lot about unix sockets and everything works fine using tcp/puma default. My rails app is in my user directory. Is that the problem?? socket is starting in /var/run--I can start in /tmp, but I've heard that's bad practice? Provided I start the server in /tmp, I then can't access it via the server's ip--then what? I'm happy to provide any needed info, I just don't know a whole lot about server/nginx/puma.

  Read the article

• Parking domains and avoiding so called "search engine penalities"

  - by senthilkumar-c

  I have purchased two domains from one particular registrar and hosting from GoDaddy. Assume they are domain1.com and domain2.com Assume my hosting IP address is 111.111.111.111 I added both domain1.com and domain2.com in my domain management control panel and gave the same two nameservers for both domains at my registrar's control panel. So, now, both domains should show the same website. When I ping "domain1.com" or "domain2.com" the results say - Pinging domain1.com [111.111.111.111] with 32 bytes of data: Pinging domain2.com [111.111.111.111] with 32 bytes of data: respectively. So, they both point to the same hosting IP. BUT, internally, I have configured IIS to point them to different folders so that different websites are shown. (My hosting plan is expensive and I intend to use the space and bandwidth for many websites). But still, technically, all domains point to same IP address. Is this a bad thing? Is this what is called "domain parking"? I read some search engine forum posts that two domains pointing to the same IP/Website will be penalised by search engines and stuff. I have also read that simply "parking" the domains won't attract penality. I don't know whether what I have done is parking or the so called "wrong" thing. Can someone shed light on what I have done and what I should do? I don't want to be blacklisted by any search engine. P.S. I know this is not a search engine forum, but I am new to website hosting and domains and I am very weak in nearly all technical terms and concepts relating to web hosting and domains. I thought this will be a good place to understand these things.

  Read the article

• iptables -- OK, **now** am I doing it right?

  - by Agvorth

  This is a follow up to a previous question where I asked whether my iptables config is correct. CentOS 5.3 system. Intended result: block everything except ping, ssh, Apache, and SSL. Based on xenoterracide's advice and the other responses to the question (thanks guys), I created this script: # Establish a clean slate iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -F # Flush all rules iptables -X # Delete all chains # Disable routing. Drop packets if they reach the end of the chain. iptables -P FORWARD DROP # Drop all packets with a bad state iptables -A INPUT -m state --state INVALID -j DROP # Accept any packets that have something to do with ones we've sent on outbound iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # Accept any packets coming or going on localhost (this can be very important) iptables -A INPUT -i lo -j ACCEPT # Accept ICMP iptables -A INPUT -p icmp -j ACCEPT # Allow ssh iptables -A INPUT -p tcp --dport 22 -j ACCEPT # Allow httpd iptables -A INPUT -p tcp --dport 80 -j ACCEPT # Allow SSL iptables -A INPUT -p tcp --dport 443 -j ACCEPT # Block all other traffic iptables -A INPUT -j DROP Now when I list the rules I get... # iptables -L -v Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 DROP all -- any any anywhere anywhere state INVALID 9 612 ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT all -- lo any anywhere anywhere 0 0 ACCEPT icmp -- any any anywhere anywhere 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:ssh 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:http 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:https 0 0 DROP all -- any any anywhere anywhere Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 5 packets, 644 bytes) pkts bytes target prot opt in out source destination I ran it and I can still log in, so that's good. Anyone notice anything major out of wack?

  Read the article

• Freebsd jail for an small company - checklist - what shouldn't forget

  - by cajwine

  Looking for an checklist for an "small company freebsd/jail server". Having pretty common starting point: FreeBSD jail (remote/headless) for the company: public web, email, ftp server, and private (maybe in the future partially public) wiki (foswiki) 4 physical persons, (6 email addresses) + one admin - others will never use ssh) have already done usual hardening on the host side (like pf, sshguard etc). my major components are: dovecot, exim, apache22, proftpd, perl5.14. Looking for an checklist, what I shouldn't forget. My plan: openssl self-signed certificates for exim, dovecot and proftpd (wildcard keys) openssl self-signed certificate for apache (later will go for "trusted-signed" key) My questions are: is is an "good practice" having one pair of wildcard SSL-certificates for many programs? (exim, dovecot, proftpd) - or should I generate one key for each service? should I add all 4 persons as standard (unix) users, or I should go with virtual users? Asking because: have only small count of users, and it is more simple to configure everything (exim, dovecot) for local users ($HOME/Maildir), plus ability to set $HOME/.forward/vacation and etc. is here some (special) things what I should consider? (e.g. maybe, in the future we want setup our own webmail - will make this any difference?) any other recommendation? Thank you, hoping that this question fit into the http://serverfault.com/faq under the: Server and Business Workstation operating systems, hardware, software Operations, maintenance, and monitoring Looking for an checklist, but please explain why you're recommending it. See Good Subjective, Bad Subjective. related: What's your suggested mail server configuration for a FreeBSD server?

  Read the article

• Create account for service

  - by Andy

  I am configuring a new server. The server is running Hudson that is going to copy some files from this server to another. The other server is a virtual machine. Both running Windows Server 2012. Hudson is started on server A with log on as "Local System". When I come to the copy phase it says "Access denied". Changing the log on to "Administrator" works. However, I guess this is bad. I do not have much experience with user management. I tried to create a own hudson account on both servers A and B. I tried to log on as hudson account in the service-management but it doesn't start. How would you create an account for this particular service that has access to the shared folder on server B and can be used to start the service on server A? I guess I need two accounts with same username and password on server A and server B? The folder on Server B is shared with everyone and the guest account is enabled.

  Read the article

• Win 7 x64 explorer.exe stops responding on copy/paste

  - by Sourabh

  Few months ago I changed my Win7 orb using this software. But it changed only the explorer.exe in C:\Windows. To solve that, I copied explorer.exe from there to C:\Windows\system32 and C:\Windows\SysWOW64 (Probably a bad idea). Things were working fine until a few days ago, it started giving me problems while copying. Sometimes, when I copy/paste, It works fine but sometimes it stays on that dialog box which looks like it is doing pre-copying things like counting number of files/file size etc. But its not. It stays on that screen forever. Now if I try to close it, title changes to cancelling but rest stays the same. If I try to close it too many times, explorer.exe crashes. And its not related to file-size. It may crash for 4Mb file and work fine for 10Gb file but some other time, it'll do the opposite. Is there any way to reset my explorer.exe and Is this because of explorer.exe or something else PS: I forgot to take backup of explorer.exe. PS2: I didn't install any software or downloaded anything that could harm my computer. EDIT I tried System Restore and SFC /scannow but they didn't help.

  Read the article

• Can Spotlight or Media Browser index metadata contained in iPhoto or Aperture in Mac OS X?

  - by jaydles

  It seems silly to go to all the trouble to assign "Face" data to thousands of photos, but not make it possible to use that data to locate them outside of that application. Is there any way to get Spotlight or Media Browser in OSX (Snow Leopard) to index and recognize metadata (Faces, Places, etc.) contained in iPhoto or Aperture? I know that that metadata is stored in the "library" database for Aperture/iphoto, rather than on the actual files (which is too bad). And I can even potentially see why it might create challenges for spotlight to use it, since spotlight is presumably a file index system, not a media organizer, but surely the media browser used across the other OSX apps is intended to use it? The media browser's whole purpose seems to be to let you easily locate and reference the items you organize in one of the ilife apps (iphoto or Aperture, in this case) from the others (say, imovie, or Mail). It's particularly vexing since the photo app on the iphone sorts by faces by default. Additionally, the mac-based media browser does access smart albums and folders, so you could establish a workaround by creating a smart album for each "face" or place, or tag, and access them that way, but it seems like there must be an easier way. Am I missing something?

  Read the article

• Looking for some IIS redirect help/ideas

  - by CoreyT

  Right now we have a site with a LOT of static asp pages such as, www.site.com/123.asp. This is due to how our current site's CMS builds it's pages by default. I don't have an exact count but we have roughly 6000 asp files in the site right now. We are in the middle of a redesign and restructuring of the site, and are looking to migrate to SEO friendly URLs. The problem we're having right now is what do we do to redirect the old pages to the new friendly URLs? I know how to do redirects that is not the issue here. The problems I am coming up with right now are listed below. 1 - Is there a limit to the number of redirects in IIS? 2 - Would having even a few thousand redirects affect IIS performance? 3 - My understanding is that we would not be passing along page rank to the new URLs, is that true? (not a major question I can ask on more SEO forums if nobody here is sure) 4 - Would using something like the IIS URL Rewrite 2 module for IIS 7 help us out? Or would I still need to define several thousand unique redirects in it? Our server right now is running Server 2003, however in the redesign I would be open to migrating to Server 2008 R2 if there is a good case for it (i.e. the URL Rewrite module). Thanks for any guidance or help. I have been looking for a good way to do this for a while now and keep coming up with things that sound problematic and bad (such as having 6000 redirects).

  Read the article

• How can I create a VLAN on my extreme switch for a separate subnet/domain?

  - by drpcken

  I'm putting together a small active directory implementation for a buddy of mine. I currently have 2 servers (one is the primary domain controller) and a couple clients. I need to test and run updates on every machine on this domain, but I would have plug them into my current LIVE domain to get it internet access. From what I've read having two separate domains on a single subnet is a bad idea (even though it is temporary) so I don't want to risk messing anything up on my production domain. I'm pretty sure I can create a separate VLAN on my extreme 48 port switch and plug this smaller domain into it on a different subnet, but I don't know the commands. Both subnets would need internet access of course (one of the things I can't wrap my head around is routing internet traffic between subnets (gateway is on production subnet). Switch is a Summit x450e-48p My production domain is on subnet 192.168.200.0. My new domain I want to put online would go into subnet 192.168.10.0. A shove in the right direction would be greatly appreciated. Thank you!

  Read the article

• Implementing emailing (bulk & event based) features for my website.

  - by Kabeer

  Hello. For my upcoming social networking website, I am looking for suggestions on the best way to implement emailing. Here are some of my requirements and constraints: Requirements: - Should be able to send emails based on events (new registrations, change password, etc.), promotions (advertisements based on user consent), bulk mails (newsletters), reminders (profile updates), etc. I hope I got the point through. - Should be able to process faults (incorrect email address, mail-box full, etc) - User initiated invites (inviting friends to connect) Constraints: - As of now I am looking at Godaddy for hosting. Subsequently I shall move to, may be Amazon Cloud. Godaddy seems to be excruciatingly conservative (not bad always) when it comes to the ability to send email. - My tests on Godaddy so far have been discouraging. There is limit to no. of emails I can send and sometimes if emails carries special characters it throws strange exceptions like there was a virus affected attachment (even though I hadn't attached a thing). The replies from Godaddy support have been equally funny. My intent is not to portray Godaddy as wrong but I am looking for a work-around that frees me from said constraints. I am looking for a mechanism / service that is either free of very cost effective. I wonder how other sites address this. Mine is a .Net / Windows based application.

  Read the article

• How do I determine how future-proof and stable a router is?

  - by Aarthi

  I mentioned in my last question that my wireless router had a bad habit of crashing. After consulting with the Super User chatroom, as well as my sysadmin, I've decided I may as well purchase a new router. However, I'm unsure how to evaluate all these tech specs that get touted about. The two things that seem to be the most important to me are: (1) keeping my router future-proof (as standards evolve and change), and (2) ensuring its stability. Unfortunately, I'm not sure what, exactly, I should be looking for in the tech specs or the item description that can give me a good idea of how stable or future-proof my decide will be. What should I look for? Can I determine stability without having to try the device out myself? Please note: I'm not a battle-hardened power user by any means, so I'll likely be reliant on the given firmware for my router. My last router lasted me like four years, so I mostly just want something that'll cover a 500 sqft apartment in New York with minimal crashing, so that I can watch Hulu in peace. And make Skype calls. If it helps, the router models that I'm currently decided between are this ASUS one and this LinkSys one.

  Read the article

• How to transform a csv to combine matching rows?

  - by Christian Wolf

  I have a CSV file with some transaction data. Let's say date, volume, price and direction (sell/buy). Additionally there is a ID for each transaction and on each closing transaction (the newer one) there is a reference to the corresponding transaction. Classical database referencing. Now I want to do some statistics and draw some plots. This could be done via Octave, LaTeX/TikZ, Gnuplot or whatever. To do this I need both buy and sell price in one row. My thought was to preprocess the CSV to get another CSV containing the needed information and then to do the statistics. In the end I'd like to have a solution based on scripts and not on a spreadsheet as data might change often (exported from online DB). My actual solution (see http://paste.ubuntu.com/6262822/ ) is a bash script that parses the CSV line by line and checks if there exists a corresponding transaction. If found, a new row is written to the destination CSV. If not a warning is printed. The bad news: For each row in the source file I have to read the whole file a few times. This causes long running times of 10sec for 300 lines. As the line number might rise soon (10k lines), this is not perfect. I am aware, that there are many shells to be opened in the script which might cause the performance problems. Now my questions: Is bash/awk/sed/.... a good way to do things? Should I first import all data into a "real" local database to use SQL? Is there an easy way to achieve the desired results?

  Read the article

• Liked Arch Linux - but I am still not sure if its the right distro for me...

  - by BlackAndGold

  As the title says... I used Arch Linux for a while and liked it a lot: leightweight, sleek, fast and well documented with a great community. However I had to format my hd and for the sake of being too lazy to reinstall arch, I used windows 7 exclusively for a while. Now I want to get back to linux again (still dual boot), mainly for web development purposes and using handy tools such as rsync ect. Again, I liked Arch, but there is too much tweeking, too much reading up and too much figuring out what to do as well es some bad suprises especially when you need them the least and when just quickly want to get some work done. I kind of would like to have a little more "out of the box" distro that is still fast and somewhat leighweight and of course reliable. I actually considered Ubuntu, which I am not too big of a fan of, but I will still give the minimal install a shot. However other distros seem interesting as well, such as crunchbang and mint debian ecpecially. My question, hoping this isn't too boring for many you, what is the right distro for me?

  Read the article

< Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >