Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 268/757 | < Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >

• Ubuntu sound volume is 40% lower than in Windows

  - by ncomx

  I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

  Read the article

• Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

  Read the article

• Avoid overwriting all the methods in the child class

  - by Heckel

  The context I am making a game in C++ using SFML. I have a class that controls what is displayed on the screen (manager on the image below). It has a list of all the things to draw like images, text, etc. To be able to store them in one list I created a Drawable class from which all the other drawable class inherit. The image below represents how I would organize each class. Drawable has a virtual method Draw that will be called by the manager. Image and Text overwrite this method. My problem is that I would like Image::draw method to work for Circle, Polygon, etc. since sf::CircleShape and sf::ConvexShape inherit from sf::Shape. I thought of two ways to do that. My first idea would be for Image to have a pointer on sf::Shape, and the subclasses would make it point onto their sf::CircleShape or sf::ConvexShape classes (Like on the image below). In the Polygon constructor I would write something like ptr_shape = &polygon_shape; This doesn't look very elegant because I have two variables that are, in fact, just one. My second idea is to store the sf::CircleShape and sf::ConvexShape inside the ptr_shape like ptr_shape = new sf::ConvexShape(...); and to use a function that is only in ConvexShape I would cast it like so ((sf::ConvexShape*)ptr_shape)->convex_method(); But that doesn't look very elegant either. I am not even sure I am allowed to do that. My question I added details about the whole thing because I thought that maybe my whole architecture was wrong. I would like to know how I could design my program to be safe without overwriting all the Image methods. I apologize if this question has already been asked; I have no idea what to google.

  Read the article

• Cube chunk via list ToArray()

  - by Christian Frantz

  I've created a list of vertices that I call for each cube made in my array "cubes". When each cube is create, SetUpVertices is called which is a method that stores the 8 vertices of my cube. At the end of my list creation, I create a vertex buffer, and set the data of the list that contains vertices of all 25 cubes to that vertex buffer, effectively creating a "chunk" of cubes. The problem is that Invalid Operation Exception "The array is not the correct size for the amount of data requested." at the line vertices.ToArray(). I don't have an array for this, as the amount of cubes will be changing and arrays aren't dynamic. What could be the cause of this? for (int x = 0; x < 5; x++) { for (int z = 0; z < 5; z++) { SetUpVertices(); cubes.Add(new Cube(device, new Vector3(x, map[x, z], z), color)); } } vertexBuffer = new VertexBuffer(device, typeof(VertexPositionColor), 8, BufferUsage.WriteOnly); vertexBuffer.SetData<VertexPositionColor>(vertices.ToArray());

  Read the article

• Changing the Default Windows Phone 7 Deployment Target In Visual Studio 2010

  - by mbcrump

  After you download and install the January 2011 Windows Phone update, you will notice one annoying thing. The default deployment target for Windows Phone Projects in Visual Studio changes to Windows Phone 7 Device. Before the update, it defaulted to the Emulator. I found this extremely annoying as I’m more than likely going to test with the emulator before putting it on my actual device. Now to make things fair, Microsoft told you they were going to switch the default and even provided a solution, but you will have to check a tiny paragraph in the release notes. The good news is that its very easy to do: Simply navigate out to : %LocalAppData%\Microsoft\Phone Tools\CoreCon See the folder named, “10.0”? Go ahead and delete it. Now, the folder will be completely empty and if you fire up Visual Studio 2010 you will see we are now defaulting to the Emulator again. In my opinion, this should have been left at Emulator. Now, new WP7 developers will get a build error when they first start a WP7 project and will not know why until they read the error list.  Subscribe to my feed CodeProject

  Read the article

• 12.10 no audio via hdmi and video speeds up

  - by jackson

  I have a laptop with an ati radeon 4200, on 12.04 everything worked fine, since upgrading to 12.10 I cannot get sound over the hdmi. When I switch to hdmi audio the video speeds up to about 2x. I can use the speakers in my laptop and watch video via hdmi with no problems. Things I have tried: Various tutorials to install the AMD/ATI drivers, all of which resulted in low graphics mode. Checked that everything is properly set in alsamixer, the sound utility and - installed pavucontrol and checked everything in there. Verified the output from cat /proc/asound/cards looks normal When I initially upgraded there was a plethora of problems which I believe were due to the old proprietary driver still being used but not compatible, after a few hours trying to fix that I decided just to back up and do a fresh install which works great except for the above stated problem. Any help would be greatly appreciated!! Finally hopefully this hasn't already been answered, I have tried a few different searches on the boards and haven't come up with anything. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0

  Read the article

• Repair ext4 filesystem on USB drive

  - by phineas

  Yet another filesystem question. I wanted to use a USB drive that I hadn't mounted for a month or so and was surprised by the fact Ubuntu was unable to mount it. I looked it up in the disk utility and it said it discovered a device with 17 MB instead of 2 GB. The hardware looks intact, I hope for the best for repairing the ext4 filesystem. I followed the instructions from HOWTO: Repair a broken Ext4 Superblock in Ubuntu, but I wasn't successful. # fsck.ext4 -v /dev/sdb e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Filesystem blocks are invalid, however when I run the recommended solution to try the alternate superblock, I get the following output: # e2fsck -b 8193 /dev/sdb e2fsck 1.42.5 (29-Jul-2012) e2fsck: Invalid argument while trying to open /dev/sdb plus the same error message as in the last paragraph above. Any ideas how to recover the drive? Thank you very much! Edit: testdisk won't help. I'm still stunned why the tools only discover 17 MB.

  Read the article

• My Windows Phone 7 experience: 45 days in

  - by Enrique Lima

  November 13th, 2010 was the day I got my Windows Phone 7.  It was an exciting day, a lot of anxiety too.  Over a phone? Sadly, yes! Being a Zune Pass subscriber, it was something worth looking forward too, being a consultant that relies and works with Microsoft technologies and having the option of OneNote (without converters and such) on my phone was a great thing too. Has that changed over 45 days?  No, not really.  But I find myself at the very same place I was with my iPhone, I don’t really use the music player as I spend enough time in front of a computer where I have Pandora and the Zune Desktop.  Or in a car with Satellite Radio.  As for OneNote, that keeps me hooked and with access to my notes no matter where I take them. The Device: Samsung Focus Likes: OneNote integration, Zune capabilities (just note my comment above), fast and smooth interface, calendar, tiles, the device itself. Dislikes: Heavy glitches in SharePoint interaction. And a very weird one I have experienced is, any pictures I get sent from an iPhone via email will register as an attachment but the pictures are not listed as the attachment once I open the message … weird!!  Then, of course, some apps have not made it to the platform (not sure they ever will … Pandora??!!??  Chase??!!??).  But those apps missing is not the phone, or Microsoft’s fault (IMO).  In summary, I am happy with it, and some of the missing apps have made me shift the way I work with the products or features affected … meaning I rely on my desktop stuff for that.

  Read the article

• Can't connect to Wireless Network - Ubuntu 12.04 LTS & Sabrent A111N USB Dongle

  - by Ohgodwhy

  I've been trying to connect to this network for quite some time. I can't directly connect to the router with a Wire, but can access the Router with other wireless devices without any issues. I had previously tried several other Wifi nic's but none of them would load properly. Today, i went and bought a new (supported) Sabrent A111N USB Dongle, which said explicitly that it works with Linux 2.4 +. I popped the Dongle in, and low-and-behold it immediately said that there were Available Wireless Connections. I selected my connection and tried to connect, but it just loops constantly while saying Wireless Disconnected then attempts to connect again over and over. ifconfig and iwconfig both show my device in a ready and working state. However, iwlist wlan0 scan says that there are no results found. I don't get it... At one point, I could see the CPU in the DHCP client list under the router, but it doesn't fully make the connection (something about a timeout?). Any help would be appreciated. Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

  Read the article

• Why do I get disk I/O errors booting the 3.2 kernel on a xen vps server?

  - by Doug

  I have a xen vps, which I just upgraded to the new LTS 12 Precise Pangolin. However, I see this error on booting: [ 12.848076] end_request: I/O error, dev xvda, sector 12841 [ 12.848093] end_request: I/O error, dev xvda, sector 12841 [ 12.848103] Buffer I/O error on device xvda1, logical block 1605 [ 12.848110] lost page write due to I/O error on xvda1 [ 12.848129] Aborting journal on device xvda1. Results in / being mounted read-only. Reboot: [ 3.087257] EXT3-fs (xvda1): warning: ext3_clear_journal_err: Marking fs in need of filesystem check. [ 3.087677] EXT3-fs (xvda1): recovery complete [ 3.088514] EXT3-fs (xvda1): mounted filesystem with ordered data mode Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. fsck from util-linux 2.20.1 PRGMRDISK1 contains a file system with errors, check forced. Checking disk drives for errors. This may take several minutes. Press C to cancel all checks in progress PRGMRDISK1: ***** REBOOT LINUX ***** PRGMRDISK1: 371152/6001184 files (2.8% non-contiguous), 4727949/12000000 blocks mountall: fsck / [308] terminated with status 3 mountall: System must be rebooted: / [ 151.566949] Restarting system. Name ID Mem VCPUs State Time(s) shadowmint 236 2048 1 --p--- 0.0 Reboot - back to 1. This is definitely an issue with the 3.2 kernel, because booting the 3.0.0 or 2.6.38 kernel series make this issue magically disappear. I'm certain this is some kind of weird xen thing, but no idea. Anyone? Anyhow, until this is resolve I strongly recommend against upgrading if you're running a xen server.

  Read the article

• Get to No as fast as possible

  - by Tim Hibbard

  There is a sales technique where the strategy is to get the customer to say “No deal” as soon as possible.  The idea being that by establishing terms that your customer is not comfortable with with, the sooner you can figure out what they will be willing to agree to.  The same principal can be applied to code design.  Instead of nested if…then statements, a code block should quickly eliminate the cases it is not equipped to handle and just focus on what it is meant to handle. This is code that will quickly become maintainable as requirements change: private void SaveClient(Client c) { if (c != null) { if (c.BirthDate != DateTime.MinValue) { foreach (Sale s in c.Sales) { if (s.IsProcessed) { SaveSaleToDatabase(s); } } SaveClientToDatabase(c); } } }   If an additional requirement comes along that requires the Client to have Manager approval or for a Sale to be under $20K, this code will get messy and unreadable. A better way to meet the same requirements would be: private void SaveClient(Client c) { if (c == null) { return; } if (c.BirthDate == DateTime.MinValue) { return; }   foreach (Sale s in c.Save) { if (!s.IsProcessed) { continue; } SaveSaleToDatabase(s); } SaveClientToDatabase(c); } This technique moves on quickly when it finds something it doesn’t like.  This makes it much easier to add a Manager approval constraint.  We would just insert the new requirement before the action takes place.

  Read the article

• My Obligatory IPad Post

  - by mark.wilcox

  I've had my IPad for about a week now. So I thought I'd write some thoughts down based on my initial experiences. Here are my initial take-aways: 1 - Netflix OnDemand - I'm a movie junkie. I'm now more apt to just start a movie as background sound for my workday (I telecommute - so except for the occasional bark from my dog, it's awfully quiet here if I don't have something going). 2 - The Email Client is really nice and I'm as fast or faster typing when I have the wireless keyboard engaged. Even with onscreen keyboard - I'm already close to 75% of desktop speed 3 - The battery life is incredible - I think this is the first case where a mobile device actually under-promised on battery 4 - It totally has killed the notion of using a normal PC for my wife and mother-in-law - neither of which had wanted an iPhone/iPod Touch or really any Apple device until they got to play with my iPad. The concept of - instant on, easy to hold and touch-based navigation has them hooked. Heck, it has me hooked. My ultimate goal is to be able to have it at least replace the need to take my netbook with me on the road. I haven't had a chance to complete my testing on that front yet - between work, my wife traveling (for a change) and now my wife home sick - I haven't had time to just play with it. But so far my only regret - that I haven't already bought two more for everyone else in my family who wants to use mine. Posted via email from Virtual Identity Dialogue

  Read the article

• Can't install Linux drivers for ASUS N-13 wireless adapter

  - by jcc

  I have a USB N13 wireless Adapter with install CD-- For Windows. I downloaded drivers from ASUS FOR N13 for Linux. Disregard install CD that came with adapter; it's for Windows. I then downloaded Windows Wireless driver install program app from Software Center in Ubuntu 12.10. The problem is me. I am newbie with all things linux; software sources, G Debi, default archive manager, synaptic package manager and the Terminal. The downloaded driver file is a .zip file. I managed to extract it to a tar.gz file and then to open it to the contained files. When I use the Windows Wireless driver program it ends up telling me there is no .inf file and goes no further. It wants to install .inf file but I don't even see one in all the files. Can someone please help me . I think you can tell by my wording I don't have a clue. I hope this is'nt too chatty. I've tried to be explicit and to the point. Thank you. Oh, this is on an ASUS LAPTOP K53E. I've looked all over Ask Ubuntu and finally found some questions even on the N13 but they didn't help; still some differences in the exact problem.

  Read the article

• Issues in pulse audio in Ubuntu 11.10

  - by Kamal

  Good Morning All. I am a new ubuntu user. So please forgive me if this question is too basic. I have installed Ubuntu 11.10 in my machine. I have logged in as USER_A. My external audio device is a Headset and I was able to hear the audio properly. I need to join my Ubuntu machine to a window's domain (my office server). I followed the steps explained in http://www.ghacks.net/2010/04/21/join-a-ubuntu-machine-to-a-windows-domain/ and was successful in joining my ubuntu machine to the windows domain. sudo apt-get install likewise-open5 sudo domainjoin-cli join DOMAIN USER_B Now when I logged in as USER_B, there is no audio for this user in the same machine. I crossed check with my User_A account. There is no issues with the sound for User_A. Only for User_B, there is no audio. When I checked the sound settings of User_B, there is no device listed in Hardware, Input and Output. Whereas for User A, my Headset is listed in Input and Output. Can anyone please help me on this. Why there is no sound for User_B? Thank you.

  Read the article

• Oops! installer misses a lib during OIF 11g install under some conditions

  - by user12674042

  If you installed OIF 11g on OEL 6.2 64bit and passed all the interesting gotchas but got stumped by this error in the WLS admin logs, and Enterprise Manager refuses to start correctly after what appeared to be a full successful install and configuration:  ...  <User defined listener oracle.sysman.eml.app.ContextInitializer failed: java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException. java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException     at oracle.sysman.eml.app.ContextInitializer.contextInitialized(ContextInitializer.java:1035) ... Caused By: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270) ... <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'em'. weblogic.application.ModuleException:     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520) ... The problem is the installer fails to properly place a required jar (http_client.jar) in the appropriate location for your WLS domain.   Assuming you have Oracle DB installed on the same server, just copy the jar to the lib folder in your domain, e.g. if your domain is IDMDomain and middleware install location is /u01/Middleware then cp /u01/app/oracle/product/11.2.0/db_1/oui/jlib/http_client.jar \   /u01/Middleware/user_projects/domains/IDMDomain/lib and restart your admin WLS.  Enterprise Manager will start to work.  Hopefully this will save others some time while on the bleeding edge...

  Read the article

• Adventures in Lab Management Configuration: CMMI Edition Part 1 of 3

  - by Enrique Lima

  I remember at one point someone telling me how close Migrate was to Migraine. This was a process that included an environment from TFS 2008 to TFS 2010, needed to be migrated too as far as the process template goes.  Here we are talking about CMMI v4.2 to CMMI v5.0.  Now, the process to migrate the TFS Infrastructure is one thing, migrating the Process Template is a different deal, not hard … just involved. Followed a combination of steps that came from a blog post as the main guidance and then MSDN (as suggested on the guidance post) to complement some tasks and steps. Again, the focus I have here is CMMI. The high level steps taken to enable the TFS 2008 CMMI v4.2 migrated to TFS 2010 Process Template are: 1)  Backup the Collection, Configuration and Warehouse Databases. 2)  Downloaded the Process Template using Visual Studio 2010. 3) Exported, modified and imported Bug Type Definition 4) Exported, modified and imported Scenario or Requirement Type Definition. 5) Created and imported bug field mappings. Now, we can attempt to connect using Test Manager, and you should be able to get this going. After that was done, it was time to enroll VMs that already existed in the environment.  This was a bit more challenging, but in the end it was a matter of just analyzing the changes that had been made to had a temporary work around from the time we migrated to the time we converted the Work Items and such and added fields to enable communication between the project and the Test and Lab Manager component. There are 2 more parts to this post, the second will describe the detailed steps taken to complete the Process Template update and the third will talk about the gotchas and fixes for the Lab Management portion.

  Read the article

• Wubi installation broken by update - now unable to mount

  - by Outspaced

  As of today, my wubi installation of Ubuntu won't boot (goes straight to 'minimal bash-like interface) and I am unable to mount it when I boot straight to Ubuntu. If I boot straight into Ubuntu (not using Wubi, not going via Windows), I am able to mount the Windows partition and see the Wubi partition there: sudo mount -t ntfs /dev/sda5 /media/winxp And from there I can see the wubi root disk: /media/winxp/ubuntu/disks/root.disk But if I try to mount this: sudo mount -o loop /media/winxp/ubuntu/disks/root.disk /media/wubi I get an error: /media/winxp/ubuntu/disks/root.disk Input/Output Error If I then try fsck: sudo fsck /media/winxp/ubuntu/disks/root.disk I get this: Input/Output Error while trying to open /media/winxp/ubuntu/disks/root.disk The Superblock could not be read or does not describe a correct etx2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt and you might want to try running e2fsk with an alternate superblock: e2fsck -b 8193 <device ... this gives me the same result. There is data on this partition that I really need to be able to access, so I can't delete and reinstall. Any help much appreciated. Thanks.

  Read the article

• Why is rvalue write in shared memory array serialised?

  - by CJM

  I'm using CUDA 4.0 on a GPU with computing capability 2.1. One of my device functions is the following: device void test(int n, int* itemp) // itemp is shared memory pointer { const int tid = threadIdx.x; const int bdim = blockDim.x; int i, j, k; bool flag = 0; itemp[tid] = 0; for(i=tid; i<n; i+=bdim) { // { code that produces some values of "flag" } } itemp[tid] = flag; } Each thread is checking some conditions and producing a 0/1 flag. Then each thread is writing flag at the tid-th location of a shared int array. The write statement "itemp[tid] = flag;" gets serialized -- though "itemp[tid] = 0;" is not. This is causing huge performance lag which technically should not be there -- I want to avoid it. Please help.

  Read the article

• No sound after upgrading to Ubuntu 11.10 from win7

  - by Tilman

  just as a prefix to my question, i'd like to note that i'm just now entering the world of Linux (unless you count my android, but that's a very different experience...) i have two computers now that run Ubuntu 11.10, the first of which i've had very little problems with, aside from figuring out the basics. the second, from which i'm writing this question, has (up to this point) only had one problem.... no sound. i've read a couple questions similiar and found little help as the component catalog doesn't have my computer listed. (in fact i'm not suprised this is a pos i had my mom grab from her work before they officially closed the doors behind them) had perfect sound before hand, and no sound now. sudo lspci -v brings up 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) Subsystem: Intel Corporation Device d608 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at ff980000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel any help would be greatly appreciated, me and my gf just wanna watch a damn movie lol

  Read the article

• Wireless drivers

  - by Kencer

  The results for my laptop are as below. How will i install wireless drivers and graphics? $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) $ sudo lshw -c network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0500000-f0507fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 07 serial: 3c:97:0e:85:c0:0d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=172.16.96.36 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• Dual-Boot Problem

  - by user171379

  I have a HP laptop that originally had Windows 7 OS on it, I partioned the drive and allocated 100gb (est.) for the ubuntu install. the install went fine i have ubuntu and windows 7 still on the computer. But I can not get the OS boot screen to show ubuntu as an OS. I can while start up pull up the start menu screen via ESC. Key and press F9 for Boot Device Options and get the boot manager screen and it lists... OS boot manager, Ubuntu (Hitachi HTS 543232A7A384), boot from EFI file, and Notebook Hard Drive... I can boot Ubuntu from this screen by selecting Ubuntu. But i would like to make it easier to access. The computer boot is not for myself otherwise it would not be a problem i would remove windows altogether. I would like to make it basically "User Friendly" if that's at all possible and make the OS boot screen show Ubuntu as a bootable OS as well as Windows 7. on the boot selection screen. Any help on this issue would be greatly appreciated, I've looked to see if i could find the answer and maybe i've overlooked something so here I am. Like i said i need it to be as user friendly as possible and force the user to choose windows 7 or ubuntu not send them into one or the other without them being allowed to choose. I can get any information you might need if necessary but i dont know exactly what you'll need other than what i've given. Ubuntu version is the 13.04 just so you know.

  Read the article

• What to do when 'dpkg --configure -a' fails with too many errors?

  - by rudivonstaden

  During an upgrade from lucid (10.04) to precise (12.04), the X session froze, and I have been trying to recover the upgrade to get a stable system. I have performed the following steps: Used ssh to log in to the stalled system over the network. Checked the contents of the /var/log/dist-upgrade directory. There was no activity on main.log, apt.log or term.log. top showed that process 'precise' was using about 3% CPU, but I could find no evidence that the upgrade process was still doing anything. 'dpkg' did not show up in top, but it came up with pgrep dpkg | xargs ps Killed the 'dpkg' and 'precise' processes Tried to recover the upgrade by running sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a. This was partially successful (some packages were configured), but failed with the message Processing was halted because there were too many errors. I ran the same command a few times, and each time some packages were configured but others failed. Tried running sudo apt-get -f install. It fails with similar errors to dpkg. The current situation is that dpkg --configure -a and sudo apt-get -f install fails with two kinds of error: Dependency issues, e.g.: dpkg: dependency problems prevent configuration of cifs-utils: cifs-utils depends on samba-common; however: Package samba-common is not configured yet. dpkg: error processing cifs-utils (--configure): dependency problems - leaving unconfigured Resource conflict, e.g.: debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable Additionally, it seems there's reference to potential boot problems, so I'm not keen to reboot without fixing the install first: dpkg: too many errors, stopping Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab So my question is, how to get a working install when dpkg --configure -a fails?

  Read the article

• Grub2 attempting to boot hd1 when it should boot hd0

  - by JoBu1324

  I'm attempting to perform a "normal" install on a USB3 SSD (I don't know if it is noteworthy, but I don't have a swap partition). The installation proceeds normally (I'm installing from a USB2 device I created using LiLi Boot, with a copy of Ubuntu 12.10 64bit that I downloaded directly from the source. The system I'm running Ubuntu on has had a more traditional installation of ubuntu running on it without issue (also 12.10), so I know that everything works A-OK when booting from a 7200RPM internal disk. There are a number of oddities that I've noticed so far, including graphics corruption, but the first and most pressing issue is that Grub2 refuses to recognize the correct hd. From /boot/grub/grub.cfg: if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd1,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 else search --no-floppy --fs-uuid --set=root b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 fi font="/usr/share/grub/unicode.pf2" fi This is from a 100% fresh install of linux (first boot), which was installed while no hard drives were connected to the system, other than the USB2 LiLi drive. The system refuses to boot unless I change the hd1,msdos1 - hd0,msdos1 in the grub menu at boot, when it is the only disk device connected to the PC. What options are left for me to troubleshoot this issue? I've been racking my brains and taxing the internet trying to dig up something on this problem, but now I'd like to see if the Ubuntu community can rise to the challenge and help me fix this boot problem. This is the second time I've attempted this particular setup. The first time, after days of wasted time, I managed to get it to boot every other boot - i.e. every even boot it would boot into Ubuntu like it was happy; every odd boot it would boot into the BusyBox or Grub prompt. At one point it complained that it couldn't find /dev/disk/by-uuid/[the disk], which I found most perplexing, since the disk was there and booted before and after the occurrence (with intervention).

  Read the article

• WIN7 and Ubuntu lost after Installing ubuntu 12.04 and win7 dual system ,I have no OS on my laptop now

  - by abos

  Here is the procedure: In the morning I installed ubuntu using a USB directly without config any thing to my win7 system. After install complete, ubuntu installation software tell me to reboot.And everything is just find. While rebooting, there is NO UBUNTU system for me to select,and my laptop go straight to log in using WIN7. NO ubuntu shows on WIN7's configuration(Default System). Log in ubuntu using usb(try ubuntu without installation), I can find ubuntu's filesystem was already there. Formatting the disk on WIN7's disk management, rearranging them to other disk.Still having no trouble with WIN7. In the afternoon try a few times of installation and uninstallation of ubuntu. still shows no sign of selecting ubuntu system. In the evening another trial while installing ubuntu with the third option of: installing ubuntu alongside with INW7, erase win7 and install ubuntu. somethingelse --- my check failed with configuartion for what comes out with the 'something else' option,reboot. And I have no system now with some cmd tips say: Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key. Files those on win7's orginal file system and Ubuntu filesystem can still be found when I 'try ubuntu without installation'. 5.But I just got no OS when I reboot my laptop normally.

  Read the article

• Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

  - by Korakys

  Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

  Read the article

< Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >