Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 275/757 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

  • my apostrophe turns into ‚Äô

    - by Bryce Naron
    i'm trying to send the iOS device name along with the deviceToken to my server in didRegisterForRemoteNotificationsWithDeviceToken.. my device has an apostrophe in it and the request string shows as ....&name=John+Doe’s+iPhone ... I've tried replacing "'" with "" and "’" with "" .. but neither fix it.. i assume i need to convert the encoding? NSString *string = [[UIDevice currentDevice] name]; output-> John Doe’s iPhone EDIT output is from NSLog(string);

    Read the article

  • iPhone Development: CoreLocation and MapKit

    - by Mustafa
    How bad is it to use Location Manager to retrieve the location information when MapView.showUserLocation is also TRUE? I have a situation where i want to show the blue dot to indicate the user's current location, and i want to record the user's current location after some time interval. Having said that, there may be situations where the user's current location is now being shown, but i still want to get the user's current location. I think i'll have to use the Location Manager in my controller class, but setting showUserLocation = YES would mean that i'll be draining more battery since two Location Managers are working at the same time? Is this assumption correct?

    Read the article

  • UIScrollView issue with autorotation and content scaling

    - by boliva
    Hi, I'm building a new (autorotating) iPad app that consists mainly of a screen sized UIScrollView that contains an UIImageView for an image which is 5 times the iPad screen resolution while in portrait mode (3840x1024). What I haven't been able to accomplish is that whenever the device rotates (to whichever orientation) the imageView bounds and the scrollView contentSize asjusts the image for the new height (maintaining its aspect ratio), making the height of the image to always fit the device height for the given orientation (so in the particular case of this image, it would get shown as 2880x768). I tried different combinations of autoresizingMask and contentMode for the imageView but the closer I've been able to get is to effectively display the image at the desired size but with a white padding around it and into the scrollView content (to make up for the original orientation contentSize). I also tried recalculating the scrollView contentSize in the didRotate.../viewWillAnimate... rotation-related methods in my viewController class, with no avail. Best regards and thanks for your time

    Read the article

  • Orientation in a UIView added to a UIWindow

    - by Ken
    OK, bear with me. I have a UIView which is supposed to cover the whole device (UIWindow) to support an image zoom in/out effect I'm doing using core animation where a user taps a button on a UITableViewCell and I zoom the associated image. The zooming is performing flawlessly, what I haven't been able to figure out is why the subview is still in portrait mode even though the device is in landscape. An illustration below: http://www.weeshsoft.com/images/IMG_0482.jpg I do have a navigation controller but this view has been added to the UIWindow directly. Signed, Baffled in Atlanta

    Read the article

  • Why does CLLocationManager returns null locations on the iphone SDK 4 beta in the Simulator?

    - by Rigo Vides
    Hi everyone, I have this piece of code: - (void)locationManager:(CLLocationManager *)manager didUpdateToLocation:(CLLocation *)newLocation fromLocation:(CLLocation *)oldLocation { NSLog(@"Manager did update location!!"); self.currentLocation = newLocation.description; } I have this code inside a class that conforms to the CLLocationManagerDelegate. I tested earlier in sdk 3.0 and works nice (on both simulator and device). I'm testing this class on the SDK 4, in the simulator, but it gives null as a newLocation. I can't even get the NSLog for the first call. I checked other app where I use the location framework and it doesn't work either. I implemented the locationManager:didFailWithError: message also, wich is never called. Can anyone please confirm that the simulator can't do any CLLocationManager capabilities? (a link where the bug is reported as a known issue will be awesome). Is there a way to fix this? Thanks in advance.

    Read the article

  • Rails - MS-SQL Server problems (unixODBC, FreeTDS) on Mac 10.6

    - by TMB
    Followed the instructions on the Rails wiki and have had success connecting to SQL Server 2000 with TSQL -- both with DSN-less and DNS connections. I'm running Mac OS X 10.6.3. Wiki instructions here. Installed ruby-odbc, dbi (0.4.0), dbd-odbc (2.4.5), activerecord-sqlserver-adapter (2.3.5). In my database.yml (Rails 2.3.6): development: adapter: sqlserver mode: ODBC dsn: 'DRIVER=/usr/local/lib/libtdsodbc.so;TDS_Version=8.0;SERVER=mssql01.discountasp.net;DATABASE=DB_164368_dmusd;Port=1433;uid=DB_164368_dmusd_user;pwd=Schools77;' This yields the following error: ODBC::Error: S1090 (0) [unixODBC][Driver Manager]Invalid string or buffer length When I attempt to use a DSN connection, I get the following error: ODBC::Error: IM002 (0) [unixODBC][Driver Manager]Data source name not found, and no default driver specified I have in fact verified that the FreeTDS driver (libtdsodbc.so) is installed and the path correct. Can anyone spot the error of my ways? Thanks in advance.

    Read the article

  • UIView Animation: PartialCurl ...bug during rotate?

    - by itai alter
    Hello all, a short question. I've created an app for the iPad, much like a utility app for the iPhone (one mainView, one flipSideView). The animation between them is UIModalTransitionStylePartialCurl. shouldAutorotateToInterfaceOrientation is returning YES. If I rotate the device BEFORE entering the FlipSide, everything is okay and the PartialCurl is displayed okay. But if I enter the FlipSide and then rotate the device, while the UIElements do rotate and position themselves just fine, the actual "page curl" stays with its initial orientation. it just won't budge :) Is it a known issue? am I doing something wrong? Thanks!

    Read the article

  • Problem with room/screen/menu controller in python game: old rooms are not removed from memory

    - by Jordan Magnuson
    I'm literally banging my head against a wall here (as in, yes, physically, at my current location, I am damaging my cranium). Basically, I've got a Python/Pygame game with some typical game "rooms", or "screens." EG title screen, high scores screen, and the actual game room. Something bad is happening when I switch between rooms: the old room (and its various items) are not removed from memory, or from my event listener. Not only that, but every time I go back to a certain room, my number of event listeners increases, as well as the RAM being consumed! (So if I go back and forth between the title screen and the "game room", for instance, the number of event listeners and the memory usage just keep going up and up. The main issue is that all the event listeners start to add up and really drain the CPU. I'm new to Python, and don't know if I'm doing something obviously wrong here, or what. I will love you so much if you can help me with this! Below is the relevant source code. Complete source code at http://www.necessarygames.com/my_games/betraveled/betraveled_src0328.zip MAIN.PY class RoomController(object): """Controls which room is currently active (eg Title Screen)""" def __init__(self, screen, ev_manager): self.room = None self.screen = screen self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.room = self.set_room(config.room) def set_room(self, room_const): #Unregister old room from ev_manager if self.room: self.room.ev_manager.unregister_listener(self.room) self.room = None #Set new room based on const if room_const == config.TITLE_SCREEN: return rooms.TitleScreen(self.screen, self.ev_manager) elif room_const == config.GAME_MODE_ROOM: return rooms.GameModeRoom(self.screen, self.ev_manager) elif room_const == config.GAME_ROOM: return rooms.GameRoom(self.screen, self.ev_manager) elif room_const == config.HIGH_SCORES_ROOM: return rooms.HighScoresRoom(self.screen, self.ev_manager) def notify(self, event): if isinstance(event, ChangeRoomRequest): if event.game_mode: config.game_mode = event.game_mode self.room = self.set_room(event.new_room) #Run game def main(): pygame.init() screen = pygame.display.set_mode(config.screen_size) ev_manager = EventManager() spinner = CPUSpinnerController(ev_manager) room_controller = RoomController(screen, ev_manager) pygame_event_controller = PyGameEventController(ev_manager) spinner.run() EVENT_MANAGER.PY class EventManager: #This object is responsible for coordinating most communication #between the Model, View, and Controller. def __init__(self): from weakref import WeakKeyDictionary self.last_listeners = {} self.listeners = WeakKeyDictionary() self.eventQueue= [] self.gui_app = None #---------------------------------------------------------------------- def register_listener(self, listener): self.listeners[listener] = 1 #---------------------------------------------------------------------- def unregister_listener(self, listener): if listener in self.listeners: del self.listeners[listener] #---------------------------------------------------------------------- def clear(self): del self.listeners[:] #---------------------------------------------------------------------- def post(self, event): # if isinstance(event, MouseButtonLeftEvent): # debug(event.name) #NOTE: copying the list like this before iterating over it, EVERY tick, is highly inefficient, #but currently has to be done because of how new listeners are added to the queue while it is running #(eg when popping cards from a deck). Should be changed. See: http://dr0id.homepage.bluewin.ch/pygame_tutorial08.html #and search for "Watch the iteration" print 'Number of listeners: ' + str(len(self.listeners)) for listener in list(self.listeners): #NOTE: If the weakref has died, it will be #automatically removed, so we don't have #to worry about it. listener.notify(event) def notify(self, event): pass #------------------------------------------------------------------------------ class PyGameEventController: """...""" def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.input_freeze = False #---------------------------------------------------------------------- def notify(self, incoming_event): if isinstance(incoming_event, UserInputFreeze): self.input_freeze = True elif isinstance(incoming_event, UserInputUnFreeze): self.input_freeze = False elif isinstance(incoming_event, TickEvent) or isinstance(incoming_event, BoardCreationTick): #Share some time with other processes, so we don't hog the cpu pygame.time.wait(5) #Handle Pygame Events for event in pygame.event.get(): #If this event manager has an associated PGU GUI app, notify it of the event if self.ev_manager.gui_app: self.ev_manager.gui_app.event(event) #Standard event handling for everything else ev = None if event.type == QUIT: ev = QuitEvent() elif event.type == pygame.MOUSEBUTTONDOWN and not self.input_freeze: if event.button == 1: #Button 1 pos = pygame.mouse.get_pos() ev = MouseButtonLeftEvent(pos) elif event.type == pygame.MOUSEBUTTONDOWN and not self.input_freeze: if event.button == 2: #Button 2 pos = pygame.mouse.get_pos() ev = MouseButtonRightEvent(pos) elif event.type == pygame.MOUSEBUTTONUP and not self.input_freeze: if event.button == 2: #Button 2 Release pos = pygame.mouse.get_pos() ev = MouseButtonRightReleaseEvent(pos) elif event.type == pygame.MOUSEMOTION: pos = pygame.mouse.get_pos() ev = MouseMoveEvent(pos) #Post event to event manager if ev: self.ev_manager.post(ev) # elif isinstance(event, BoardCreationTick): # #Share some time with other processes, so we don't hog the cpu # pygame.time.wait(5) # # #If this event manager has an associated PGU GUI app, notify it of the event # if self.ev_manager.gui_app: # self.ev_manager.gui_app.event(event) #------------------------------------------------------------------------------ class CPUSpinnerController: def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.clock = pygame.time.Clock() self.cumu_time = 0 self.keep_going = True #---------------------------------------------------------------------- def run(self): if not self.keep_going: raise Exception('dead spinner') while self.keep_going: time_passed = self.clock.tick() fps = self.clock.get_fps() self.cumu_time += time_passed self.ev_manager.post(TickEvent(time_passed, fps)) if self.cumu_time >= 1000: self.cumu_time = 0 self.ev_manager.post(SecondEvent(fps=fps)) pygame.quit() #---------------------------------------------------------------------- def notify(self, event): if isinstance(event, QuitEvent): #this will stop the while loop from running self.keep_going = False EXAMPLE CLASS USING EVENT MANAGER class Timer(object): def __init__(self, ev_manager, time_left): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.time_left = time_left self.paused = False def __repr__(self): return str(self.time_left) def pause(self): self.paused = True def unpause(self): self.paused = False def notify(self, event): #Pause Event if isinstance(event, Pause): self.pause() #Unpause Event elif isinstance(event, Unpause): self.unpause() #Second Event elif isinstance(event, SecondEvent): if not self.paused: self.time_left -= 1

    Read the article

  • Make a service monitor and restart process

    - by Andrej
    Hi, i'm making an app that needs to be up and running at all times. (24/7) I'm not very expirienced with services, but I read on the internet that services can be made uncolasble by setting their "onclose" property to false. I have got the service monitoring my app, and the service can't be closed directly from the task manager services window... but, when I click "go to process" task manager leads me to the process the service spawned. From there I can close the process and instantly close the service. Since I don't have much expirience with services i'm wondering, is this behavior normal? If not, how to make the service unstopable?

    Read the article

  • iPhone UIWebView width does not fit after zooming operation + UIInterfaceOrientation change

    - by choonkeat
    I created a bare bones iPhone app with a UIWebView (Scales Page to Fit = YES, shouldAutorotateToInterfaceOrientation = YES) and loaded a webpage, e.g. http://stackoverflow.com/ Rotating the device shows that UIWebView is auto-resized to fit the width. Good. Incorrect: Zoom into the page and zoom out. Now rotating the device shows UIWebView in a weird width in one of the orientation (if u zoom in landscape, the portrait width is weird, vice versa). This behavior is fixed only when you navigate to another page. Correct: Load the same URL in Mobile Safari. Rotating works & the width fits regardless of the zooming exercise. Is this a UIWebView bug (probably not)? Or is there something that needs to be done to make things "just work" like in Mobile Safari?

    Read the article

  • International keyboard and UITextField secure option

    - by Chonch
    Hey, I have a UITextField in a .xib file with the secure option marked as YES. I have several international keyboards on my device. When the secure option is set to NO, I have no problem using all of the international keyboards on my device, but when it is set to YES, I am only able to use the English keyboard. Is there a way to an option I can use to enable this feature, or would I have to do this manually (don't mark the secure option and replace the text the user enters with *'s)? Thanks,

    Read the article

  • iPhone hitTest broken after rotation

    - by Adam
    Hi all, I have a UIView that contains a number of CALayer subclasses. I am using the following code to detect which layer a touch event corresponds to: - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *touch = [touches anyObject]; CGPoint touchPoint = [touch locationInView:self]; NSLog(@"%@,%@",NSStringFromCGPoint(point),[self.layer hitTest:point].name); } This works fine until the device is rotated. When the device is rotated all current layers are removed from the superlayer, and new CALayers are created to fit the new orientation. The new layers are correctly inserted and viewable in the correct orientation. After the rotation the hitTest method consistently returns nil when clearly clicking on the newly created layers and registers for locations of layers which are incorrect. The coordinates of the hit test are correct, but no layers are found. Am I missing a function call or something after handling the rotation? Cheers, Adam

    Read the article

  • Asynchronous callback for network in Objective-C Iphone

    - by vodkhang
    I am working with network request - response in Objective-C. There is something with asynchronous model that I don't understand. In summary, I have a view that will show my statuses from 2 social networks: Twitter and Facebook. When I clicked refresh, it will call a model manager. That model manager will call 2 service helpers to request for latest items. When 2 service helpers receive data, it will pass back to model manager and this model will add all data into a sorted array. What I don't understand here is that : when response from social networks come back, how many threads will handle the response. From my understanding about multithreading and networking (in Java), there must have 2 threads handle 2 responses and those 2 threads will execute the code to add the responses to the array. So, it can have race condition and the program can go wrong right? Is it the correct working model of iphone objective-C? Or they do it in a different way that it will never have race condition and we don't have to care about locking, synchronize? Here is my example code: ModelManager.m - (void)updateMyItems:(NSArray *)items { self.helpers = [self authenticatedHelpersForAction:NCHelperActionGetMyItems]; for (id<NCHelper> helper in self.helpers) { [helper updateMyItems:items]; // NETWORK request here } } - (void)helper:(id <NCHelper>)helper didReturnItems:(NSArray *)items { [self helperDidFinishGettingMyItems:items callback:@selector(model:didGetMyItems:)]; break; } } // some private attributes int *_currentSocialNetworkItemsCount = 0; // to count the number of items of a social network - (void)helperDidFinishGettingMyItems:(NSArray *)items { for (Item *item in items) { _currentSocialNetworkItemsCount ++; } NSLog(@"count: %d", _currentSocialNetworkItemsCount); _currentSocialNetworkItemsCount = 0; } I want to ask if there is a case that the method helperDidFinishGettingMyItems is called concurrently. That means, for example, faceboook returns 10 items, twitter returns 10 items, will the output of count will ever be larger than 10? And if there is only one single thread, how can the thread finishes parsing 1 response and jump to the other response because, IMO, thread is only executed sequently, block of code by block of code

    Read the article

  • jquery Fullcalendar : dynamic events function asp.net mvc

    - by Eran
    Hi, I'm integrating Fullcalendar into my app. Consider a manager interface where he can select an employee and then view this employee's calendar. Now basically I'm using the following jquery code in my view: <script type="text/javascript"> $(document).ready(function() { $("#calendar").fullCalendar({ defaultView: 'agendaWeek', isRTL: true, axisFormat: 'HH:mm', editable: true, events: "/Scheduler/CalendarData" }); }); </script> Now I would like to have the controller function assigned to the events to retrieve the specific user selected by the manager: events: "/Scheduler/CalendarData/<current_user_name> Is there any way to retrieve the selected employee user name from the view (or rather pass it to the view from the controler) and then pass it onto the bound events function? I hope I was clear enough... Thanks in Advance, Eran

    Read the article

  • Dynamically load nib for iPhone/iPad within view controller

    - by qui
    Hello I have converted an iPhone application using the wizard like thing in XCode into a universal app. It builds fine but obviously looks a bit rubbish in some areas :) I need to load nibs according to which device is being used. I dont wish to create my view controllers using initWithNib as I already have code to create the controllers with some data (initWithMyLovelyData) which doesnt do anything to do with nib loading. I know to find out the device you use UI_USER_INTERFACE_IDIOT() so I tried overriding the initWithNibName within the actual view controllers themselves, assuming they get called internally somehow. But it's not working as I guess I am unsure of the syntax. I have tried if(ipad..) self = [super initWithNibName:@"MyIpadNib" bundle:nibBundleOrNil]; And that doesnt work :/ EDIT - I know I have massively edited this, made my question a bit more specific after doing some more research - apologies!

    Read the article

  • Wincap capture filtering expression syntax

    - by cpx
    How would specify a syntax for filtering tcp server port with its ip address? const char *packet_filter = "tcp src port 2054"; bpf_u_int32 netmask; bpf_program fcode; if (d->addresses != NULL) /* Retrieve the mask of the first address of the interface */ netmask=((struct sockaddr_in *)(d->addresses->netmask))->sin_addr.S_un.S_addr; else /* If the interface is without an address we suppose to be in a C class network */ netmask=0xffffff; //compile the filter if (pcap_compile(adhandle, &fcode, packet_filter, 1, netmask) < 0) { fprintf(stderr,"\nUnable to compile the packet filter. Check the syntax.\n"); /* Free the device list */ pcap_freealldevs(alldevs); return -1; } //set the filter if (pcap_setfilter(adhandle, &fcode) < 0) { fprintf(stderr,"\nError setting the filter.\n"); /* Free the device list */ pcap_freealldevs(alldevs); return -1; }

    Read the article

  • 2-Bay External HDD Enclosure in JBOD mode fails to detect both drives (Linux & Windows)

    - by mgc8888
    I recently purchased a couple of USB 3.0 External HDD Enclosures to use for storage and backup; the idea was to have one act as backup to the other, with 4 x 3TB drives in total. However, the second drive in each is not accessible in either Linux nor Windows, and I could not determine the reason. 1. Situation The two enclosures are slightly different (couldn't find them in stock at the same time) yet from many little details appear to be the same Chinese base design with a tweaked outer shell. The models are: Sharkoon 2-Bay RAID Box Fantec MR-35DU3 The drives are Seagate 3TB Barracuda ST33000651AS, firmware CC44, all identical. From reading manuals and online sources, I determined that JBOD would be the optimal setup for my needs -- addressing the two drives separately in each enclosure would be important, making it easy to swap drives and mix&match them if needed; all the other modes implied the controller doing a combination of the drives. The software used was Debian GNU/Linux - testing/wheezy - kernel 2.6.39-2 and Windows 7 Ultimate. 2. Description of the problem Now, here comes the problem: every time I connect either of the enclosures to a PC using the supplied cable (tried a different one as well), only the HDD in the top bay is readable, the one below is detected yet errors out in various ways. According to the manuals, it should not happen: in JBOD, the system should be able to "see" two separate drives upon connection. This happens with both enclosures and any combination of HDDs (i.e. if I swap them, the same thing happens), so the HDDs are good and I think so are the enclosures (two different companies making similar products that failed in an identical fashion would be very unlikely). The top HDD can be used fine every time, I actually tried a speed test from Linux and got about 150MiB/s reads, so all is working as it should; the one below refuses to work every time. So the failure is consistent. To make sure this was not some obscure Linux bug, I tried the same under Windows 7, and the system also only created one drive letter for a drive of 3TB size (so it was only seeing one instead of both). Placing an older, known good, 2TB drive in the top bay made that the one recognised, so we have the same issue under Windows as well. Log entries under Linux (tested here with a 3TB and a 2TB drive so I could differentiate them; either one works in the top enclosure, in the test setup the 3TB one is on top). You can see them being detected, the top one is ok, but for the bottom one only errors: Jul 19 23:28:15 media kernel: [260150.582436] usb 6-1: New USB device found, idVendor=1ca1, idProduct=18ae Jul 19 23:28:15 media kernel: [260150.582440] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jul 19 23:28:15 media kernel: [260150.582442] usb 6-1: Product: Usb Sata Bridge Jul 19 23:28:15 media kernel: [260150.582444] usb 6-1: Manufacturer: SYMWAVE Jul 19 23:28:15 media kernel: [260150.582446] usb 6-1: SerialNumber: 39584B304C4E3441 Jul 19 23:28:15 media kernel: [260150.870412] scsi11 : usb-storage 6-1:1.0 Jul 19 23:28:16 media kernel: [260151.882087] scsi 11:0:0:0: Direct-Access SYMWAVE ST33000651AS CC44 PQ: 0 ANSI: 4 Jul 19 23:28:16 media kernel: [260151.882242] scsi 11:0:0:1: Direct-Access SYMWAVE ST32000641AS CC12 PQ: 0 ANSI: 4 Jul 19 23:28:16 media kernel: [260151.882677] sd 11:0:0:0: Attached scsi generic sg2 type 0 Jul 19 23:28:16 media kernel: [260151.882774] sd 11:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). Jul 19 23:28:16 media kernel: [260151.882857] sd 11:0:0:1: Attached scsi generic sg3 type 0 Jul 19 23:28:16 media kernel: [260151.882893] sd 11:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Jul 19 23:28:16 media kernel: [260151.883085] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.883582] sd 11:0:0:0: [sdb] Write Protect is off Jul 19 23:28:16 media kernel: [260151.883961] sd 11:0:0:1: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Jul 19 23:28:16 media kernel: [260151.884145] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.884570] sd 11:0:0:1: [sdc] Write Protect is off Jul 19 23:28:16 media kernel: [260151.884855] sd 11:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). Jul 19 23:28:16 media kernel: [260151.885286] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.885807] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.909595] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.910159] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.910163] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.910167] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.910169] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.910172] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.910182] quiet_error: 2 callbacks suppressed Jul 19 23:28:16 media kernel: [260151.910570] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.911153] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.911156] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.911159] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.911161] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.911164] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.911385] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.911902] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.911905] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.911908] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.911910] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.911913] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.912128] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.912650] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.912653] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.912656] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.912657] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.912660] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.912876] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.913439] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.913442] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.913445] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.913446] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.913449] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 Jul 19 23:28:16 media kernel: [260151.945227] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint Jul 19 23:28:16 media kernel: [260151.945863] sd 11:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 19 23:28:16 media kernel: [260151.945866] sd 11:0:0:1: [sdc] Sense Key : Illegal Request [current] Jul 19 23:28:16 media kernel: [260151.945870] Info fld=0x0 Jul 19 23:28:16 media kernel: [260151.945871] sd 11:0:0:1: [sdc] Add. Sense: Invalid field in cdb Jul 19 23:28:16 media kernel: [260151.945875] sd 11:0:0:1: [sdc] CDB: Read(10): 28 20 00 00 00 00 00 00 08 00 (...) and so on for like 10 seconds until it gives up (...) 3. Question So, my question would be: what is causing this? Am I missing something, should I configure things differently, is this a known limitation? Searching online for more information did not yield any useful results... Thank you in advance for any help!

    Read the article

  • XCode linking error when targeting armv7.

    - by Tom
    I've already spent countless hours puzzling over this, utilizing Google searches and other Stack Overflow questions to no avail. I have an iPhone/iPad universal application, which seems to compile fine when the target is armv6. However, when the device is iPad, I get this warning: warning: building for SDK 'Device - iPhone OS 3.2' requires an armv7 architecture. Oddly enough, the app still runs great on iPad in spite of this warning. However, I do want to do things the "right way" what ever that means in this case. When I switch the target architecture to armv7, I get linking errors: "___restore_vfp_d8_d15_regs", referenced from: *redacted* "___save_vfp_d8_d15_regs", referenced from: *redacted* ld: symbol(s) not found collect2: ld returned 1 exit status The "redacted" portions of the errors are references to the static library to which I'm trying to link. Here's what I've tried from the many suggestions online. Each of these were suggested more than once without any explanation, which leads me to believe nobody quite understands this problem: "Never use the drop down menu in the upper left of the XCode window to choose the target. Instead, set this to Base SDK and then the Base SDK to iPhone OS 3.0 in the target configuration. Set the target device to your preferred target (iPad, iPhone OS 3.2 in my situation.)" This yields the error "Library not found for -lcrt1.3.1.o" "Make sure that GCC isn't linking against the wrong version of the standard library. (You'll have to make sure the LIBRARY_SEARCH_PATH doesn't have the wrong path in it.)" My LIBRARY_SEARCH_PATH is already empty, so this doesn't seem relevant. "Try compiling with GCC 4.0 rather than GCC 4.2." I get a syntax error inside a UIKit header file. The error is "Syntax error before 'AT_NAME' token." The line is "UIKIT_EXTERN @interface UILocalizedIndexedCollation : NSObject." Another project compiles just fine with the same target settings, which is really making me question my sanity. Could I be dealing with a corrupt XCode project? If anyone knows what's actually happening and has a reference or doesn't mind explaining it, I would be so very grateful. Cheers!

    Read the article

  • Should I use vnd.youtube:videoID?

    - by Felix
    While playing around with the emulator, I noticed that when trying to view a YouTube video the browser gives an error saying it can not load the page at vnd.youtube:ngc978y6rCU?some=parameters. I don't have an Android device, but by this I can suppose that launching a VIEW intent with the data URI set to vnd.youtube:VIDEO_ID would launch the default YouTube application and watch that video. Now, my application has to be able to display YouTube videos. Right now I have a custom-made YouTube activity which does just that, but I'm thinking of: Removing my custom activity and just launching a VIEW intent with a vnd.youtube:VIDEO_ID Uri, or Testing whether that Intent is available and using it, or, if it's not available, using my custom activity. Is this a good idea? Does this work at all (as I said I have no Android device, I'll just be borrowing one from a friend to test my final application)? Which way should I go?

    Read the article

  • Detect Installed Application URI Handler on Webkit browsers

    - by Punit Raizada
    Guys, I have a question mainly related to the Iphone web browser but I am hoping the same solution would work on other browsers that are webkit based. I have a application (Iphone + Android) that registers a handler for custom URI (appuri://) on the Phone. I am able to launch the application by making a link to "appuri://act/launch" from my web pages. This works only if my application is installed on the device. If the device does not have the app installed then a message comes up "Safari was not able to open ....". What I want to do is detect if the URI Scheme is supported from the browser and then prompt my own message saying "please download the app ..blah blah blah" if the handler for the URI scheme is not found. Is there a way I can detect or find the list of URL Scheme handlers on the Phone from the Web Browser ?

    Read the article

  • Hibernate: Parent/Child relationship in a single-table

    - by Dee
    I hardly see any pointer on the following problem related to Hibernate. This pertains to implementing inheritance using a single database table with a parent-child relationship to itself. For example: CREATE TABLE Employee ( empId BIGINT NOT NULL AUTO_INCREMENT, empName VARCHAR(100) NOT NULL, managerId BIGINT, CONSTRAINT pk_employee PRIMARY KEY (empId) ) Here, the managerId column may be null, or may point to another row of the Employee table. Business rule requires the Employee to know about all his reportees and for him to know about his/her manager. The business rules also allow rows to have null managerId (the CEO of the organisation doesn't have a manager). How do we map this relationship in Hibernate, standard many-to-one relationship doesn't work here? Example code would be appreciated.

    Read the article

  • Hibernate: Parent/Child relationship in a single-table

    - by Dee
    I hardly see any pointer on the following problem related to Hibernate. This pertains to implementing inheritance using a single database table with a parent-child relationship to itself. For example: CREATE TABLE Employee ( empId BIGINT NOT NULL AUTO_INCREMENT, empName VARCHAR(100) NOT NULL, managerId BIGINT, CONSTRAINT pk_employee PRIMARY KEY (empId) ) Here, the managerId column may be null, or may point to another row of the Employee table. Business rule requires the Employee to know about all his reportees and for him to know about his/her manager. The business rules also allow rows to have null managerId (the CEO of the organisation doesn't have a manager). How do we map this relationship in Hibernate, standard many-to-one relationship doesn't work here? Example code would be appreciated.

    Read the article

  • apt-get update mdadm scary warnings

    - by user568829
    Just ran an apt-get update on one of my dedicated servers to be left with a relatively scary warning: Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.26-2-686-bigmem W: mdadm: the array /dev/md/1 with UUID c622dd79:496607cf:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/2 with UUID 24120323:8c54087c:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/6 with UUID eef74de5:9267b2a1:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/5 with UUID 5d45b20c:04d8138f:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. As instructed I inspected the output of /usr/share/mdadm/mkconf and compared with /etc/mdadm/mdadm.conf and they are quite different. Here is the /etc/mdadm/mdadm.conf contents: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md0 level=raid1 num-devices=2 UUID=b93b0b87:5f7c2c46:0043fca9:4026c400 ARRAY /dev/md1 level=raid1 num-devices=2 UUID=c0fa8842:e214fb1a:fad8a3a2:28f2aabc ARRAY /dev/md2 level=raid1 num-devices=2 UUID=cdc2a9a9:63bbda21:f55e806c:a5371897 ARRAY /dev/md3 level=raid1 num-devices=2 UUID=eca75495:9c9ce18c:d2bac587:f1e79d80 # This file was auto-generated on Wed, 04 Nov 2009 11:32:16 +0100 # by mkconf $Id$ And here is the out put from /usr/share/mdadm/mkconf # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md1 UUID=c622dd79:496607cf:c230666b:5103eba0 ARRAY /dev/md2 UUID=24120323:8c54087c:c230666b:5103eba0 ARRAY /dev/md5 UUID=5d45b20c:04d8138f:c230666b:5103eba0 ARRAY /dev/md6 UUID=eef74de5:9267b2a1:c230666b:5103eba0 # This configuration was auto-generated on Sat, 25 Feb 2012 13:10:00 +1030 # by mkconf 3.1.4-1+8efb9d1+squeeze1 As I understand it I need to replace the four lines that start with 'ARRAY' in the /etc/mdadm/mdadm.conf file with the different four 'ARRAY' lines from the /usr/share/mdadm/mkconf output. When I did this and then ran update-initramfs -u there were no more warnings. Is what I have done above correct? I am now terrified of rebooting the server for fear it will not reboot and being a remote dedicated server this would certainly mean downtime and possibly would be expensive to get running again. FOLLOW UP (response to question): the output from mount: /dev/md1 on / type ext3 (rw,usrquota,grpquota) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md2 on /boot type ext2 (rw) /dev/md5 on /tmp type ext3 (rw) /dev/md6 on /home type ext3 (rw,usrquota,grpquota) mdadm --detail /dev/md0 mdadm: md device /dev/md0 does not appear to be active. mdadm --detail /dev/md1 /dev/md1: Version : 0.90 Creation Time : Sun Aug 14 09:43:08 2011 Raid Level : raid1 Array Size : 31463232 (30.01 GiB 32.22 GB) Used Dev Size : 31463232 (30.01 GiB 32.22 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:03:47 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : c622dd79:496607cf:c230666b:5103eba0 Events : 0.24 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 104320 (101.89 MiB 106.82 MB) Used Dev Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Sat Feb 25 13:20:20 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 24120323:8c54087c:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 mdadm --detail /dev/md3 mdadm: md device /dev/md3 does not appear to be active. mdadm --detail /dev/md5 /dev/md5: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 2104448 (2.01 GiB 2.15 GB) Used Dev Size : 2104448 (2.01 GiB 2.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 5 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:09:03 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 5d45b20c:04d8138f:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 5 0 active sync /dev/sda5 1 8 21 1 active sync /dev/sdb5 mdadm --detail /dev/md6 /dev/md6: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 453659456 (432.64 GiB 464.55 GB) Used Dev Size : 453659456 (432.64 GiB 464.55 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 6 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:10:00 2012 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : eef74de5:9267b2a1:c230666b:5103eba0 Events : 0.31 Number Major Minor RaidDevice State 0 8 6 0 active sync /dev/sda6 1 8 22 1 active sync /dev/sdb6 FOLLOW UP 2 (response to question): Output from /etc/fstab /dev/md1 / ext3 defaults,usrquota,grpquota 1 1 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 #usbdevfs /proc/bus/usb usbdevfs noauto 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 # # # /dev/md2 /boot ext2 defaults 1 2 /dev/sda3 swap swap pri=42 0 0 /dev/sdb3 swap swap pri=42 0 0 /dev/md5 /tmp ext3 defaults 0 0 /dev/md6 /home ext3 defaults,usrquota,grpquota 1 2

    Read the article

  • Tridion Installation

    - by Kevin Brydon
    I am currently upgrading an installation of Tridion from 5.3 to 2011 starting almost from scratch (aside from migrating the database), brand new virtual servers. I just want to ask for some advice on my current server setup... a sanity check. All servers are running Windows Server 2008. The pages on our website are all classic ASP. Database SQL Server cluster. The 5.3 database has been migrated using the DatabaseManager. This is pretty standard and works well (in test anyway). Content Manager A single server to run the Content Manager and the Publisher. There are around 10 people using it at any one time so not under a particularly heavy load. Content Data Store Filesystem located somewhere on the network. One directory for live and one for staging. Content Delivery Two servers (cd1 and cd2) each with the the following server roles installed. cd1 writes to a filesystem content data store for the live website, cd2 writes to the content data store for the staging website. Presentation Two public facing web servers (web1 and web2) serving both the live and staging websites. The web servers read directly from the content data store as its a filesystem. Each of the web servers have the Content Delivery Server installed so that I can use dynamic linking (and other features?). I've so far set up everything but the web servers. Any thoughts? edit Thanks to Ram S who linked me to a decent walkthrough, upvoted. I suppose I should have posed some questions as I didn't really ask a question. I guess I'm a little confused over the content deliver aspect. I have the Content Delivery split in two separate parts. cd1 and cd2 do the work of shifting information from the Content Manager to the Staging/Live web directories. web1 and web2 should do the work of serving the web pages to the outside world and will interact with the content data store (file system). Is this a correct setup? I need some parts of the Content Delivery on my web servers right? Theoretically I could get rid of the cd1 and cd2 servers and use web1 and web2 to do the deployment right? But I suspect this will put the web servers under unnecessary strain should there ever be a big publish. I've been reading the 2011 Installation Manual, Content Delivery section, and I'm finding it quite hard to get my head around!

    Read the article

  • iphone - presenting an alertview with the right orientation

    - by Mike
    I have to present an alertview when my app starts. My app supports both landscape modes. Despite the landscape mode the device is when the app starts the alertview always shows in portrait. I have tried to use the accelerometer to detect the interface orientation before the orientation notification and I have the correct orientation 2 seconds before the alertview showing. Then, I use this code to set the status bar to a different orientation, hoping the alertview will follow... [[UIApplication sharedApplication] setStatusBarOrientation:UIInterfaceOrientationLandscapeRight]; or left, depending on the landscape mode. Nothing works. Is there a way to force the alertview to respect the orientation? The point here is this: I cannot set one landscape orientation in particular for the status bar, I have to detect the orientation the device is on and then set the status bar orientation. thanks for any help.

    Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >