Search Results

Search found 7205 results on 289 pages for 'job retention'.

Page 268/289 | < Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >

• PostgreSQL to Data-Warehouse: Best approach for near-real-time ETL / extraction of data

  - by belvoir

  Background: I have a PostgreSQL (v8.3) database that is heavily optimized for OLTP. I need to extract data from it on a semi real-time basis (some-one is bound to ask what semi real-time means and the answer is as frequently as I reasonably can but I will be pragmatic, as a benchmark lets say we are hoping for every 15min) and feed it into a data-warehouse. How much data? At peak times we are talking approx 80-100k rows per min hitting the OLTP side, off-peak this will drop significantly to 15-20k. The most frequently updated rows are ~64 bytes each but there are various tables etc so the data is quite diverse and can range up to 4000 bytes per row. The OLTP is active 24x5.5. Best Solution? From what I can piece together the most practical solution is as follows: Create a TRIGGER to write all DML activity to a rotating CSV log file Perform whatever transformations are required Use the native DW data pump tool to efficiently pump the transformed CSV into the DW Why this approach? TRIGGERS allow selective tables to be targeted rather than being system wide + output is configurable (i.e. into a CSV) and are relatively easy to write and deploy. SLONY uses similar approach and overhead is acceptable CSV easy and fast to transform Easy to pump CSV into the DW Alternatives considered .... Using native logging (http://www.postgresql.org/docs/8.3/static/runtime-config-logging.html). Problem with this is it looked very verbose relative to what I needed and was a little trickier to parse and transform. However it could be faster as I presume there is less overhead compared to a TRIGGER. Certainly it would make the admin easier as it is system wide but again, I don't need some of the tables (some are used for persistent storage of JMS messages which I do not want to log) Querying the data directly via an ETL tool such as Talend and pumping it into the DW ... problem is the OLTP schema would need tweaked to support this and that has many negative side-effects Using a tweaked/hacked SLONY - SLONY does a good job of logging and migrating changes to a slave so the conceptual framework is there but the proposed solution just seems easier and cleaner Using the WAL Has anyone done this before? Want to share your thoughts?

  Read the article

• how to Use JAXWS/JAXB rename the parameter

  - by shrimpy

  I use CXF(2.2.3) to compile the Amazon Web Service WSDL (http://s3.amazonaws.com/ec2-downloads/2009-07-15.ec2.wsdl) But got error as below. Parameter: snapshotSet already exists for method describeSnapshots but of type com.amazonaws.ec2.doc._2009_07_15.DescribeSnapshotsSetType instead of com.amazonaws.ec2.doc._2009_07_15.DescribeSnapshotsSetResponseType. Use a JAXWS/JAXB binding customization to rename the parameter. The conflict was due to the data type show below: <xs:complexType name="DescribeSnapshotsType"> <xs:sequence> <xs:element name="snapshotSet" type="tns:DescribeSnapshotsSetType"/> </xs:sequence> </xs:complexType> <xs:complexType name="DescribeSnapshotsResponseType"> <xs:sequence> <xs:element name="requestId" type="xs:string"/> <xs:element name="snapshotSet" type="tns:DescribeSnapshotsSetResponseType"/> </xs:sequence> </xs:complexType> I create a binding file try to address the issue...but it didn`t do the job <jaxws:bindings xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" wsdlLocation="EC2_2009-07-15.wsdl" xmlns="http://java.sun.com/xml/ns/jaxws" xmlns:jxb="http://java.sun.com/xml/ns/jaxb" xmlns:jaxws="http://java.sun.com/xml/ns/jaxws"> <enableWrapperStyle>false</enableWrapperStyle> <jaxws:bindings node="wsdl:definitions/wsdl:types/xs:schema[@targetNamespace='http://ec2.amazonaws.com/doc/2009-07-15/']"> <jxb:bindings node="xs:complexType[@name='tns:DescribeSnapshotsType']//xs:element[@name='snapshotSet']"> <jxb:property name="snapshotRequestSet"/> </jxb:bindings> <jxb:bindings node="xs:complexType[@name='DescribeSnapshotsResponseType']//xs:element[@name='snapshotSet']"> <jxb:property name="snapshotResponseSet"/> </jxb:bindings> </jaxws:bindings> </jaxws:bindings> And the command i used, was like below <wsdlOptions> <wsdlOption> <wsdl>${basedir}/src/main/resources/wsdl/EC2_2009-07-15.wsdl</wsdl> <extraargs> <extraarg>-b</extraarg> <extraarg>${basedir}/src/main/resources/wsdl/Bindings_EC2_2009-07-15.xml</extraarg> </extraargs> </wsdlOption> </wsdlOptions> What is wrong with my code???? And you can check out my project by using svn.... svn co http://shrimpysprojects.googlecode.com/svn/trunk/smartcrc/AWSAgent/

  Read the article

• Issue with dynamic array Queue data structure with void pointer

  - by Nazgulled

  Hi, Maybe there's no way to solve this the way I'd like it but I don't know everything so I better ask... I've implemented a simple Queue with a dynamic array so the user can initialize with whatever number of items it wants. I'm also trying to use a void pointer as to allow any data type, but that's the problem. Here's my code: typedef void * QueueValue; typedef struct sQueueItem { QueueValue value; } QueueItem; typedef struct sQueue { QueueItem *items; int first; int last; int size; int count; } Queue; void queueInitialize(Queue **queue, size_t size) { *queue = xmalloc(sizeof(Queue)); QueueItem *items = xmalloc(sizeof(QueueItem) * size); (*queue)->items = items; (*queue)->first = 0; (*queue)->last = 0; (*queue)->size = size; (*queue)->count = 0; } Bool queuePush(Queue * const queue, QueueValue value, size_t val_sz) { if(isNull(queue) || isFull(queue)) return FALSE; queue->items[queue->last].value = xmalloc(val_sz); memcpy(queue->items[queue->last].value, value, val_sz); queue->last = (queue->last+1) % queue->size; queue->count += 1; return TRUE; } Bool queuePop(Queue * const queue, QueueValue *value) { if(isEmpty(queue)) return FALSE; *value = queue->items[queue->first].value; free(queue->items[queue->first].value); queue->first = (queue->first+1) % queue->size; queue->count -= 1; return TRUE; } The problem lies on the queuePop function. When I call it, I lose the value because I free it right away. I can't seem to solve this dilemma. I want my library to be generic and modular. The user should not care about allocating and freeing memory, that's the library's job. How can the user still get the value from queuePop and let the library handle all memory allocs/frees?

  Read the article

• Reading a POP3 server with only TcpClient and StreamWriter/StreamReader[SOLVED]

  - by WebDevHobo

  I'm trying to read mails from my live.com account, via the POP3 protocol. I've found the the server is pop3.live.com and the port if 995. I'm not planning on using a pre-made library, I'm using NetworkStream and StreamReader/StreamWriter for the job. I need to figure this out. So, any of the answers given here: http://stackoverflow.com/questions/44383/reading-email-using-pop3-in-c are not usefull. It's part of a larger program, but I made a small test to see if it works. Eitherway, i'm not getting anything. Here's the code I'm using, which I think should be correct. EDIT: this code is old, please refer to the second block problem solved. public Program() { string temp = ""; using(TcpClient tc = new TcpClient(new IPEndPoint(IPAddress.Parse("127.0.0.1"),8000))) { tc.Connect("pop3.live.com",995); using(NetworkStream nws = tc.GetStream()) { using(StreamReader sr = new StreamReader(nws)) { using(StreamWriter sw = new StreamWriter(nws)) { sw.WriteLine("USER " + user); sw.Flush(); sw.WriteLine("PASS " + pass); sw.Flush(); sw.WriteLine("LIST"); sw.Flush(); while(temp != ".") { temp += sr.ReadLine(); } } } } } Console.WriteLine(temp); } Visual Studio debugger constantly falls over tc.Connect("pop3.live.com",995); Which throws an "A socket operation was attempted to an unreachable network 65.55.172.253:995" error. So, I'm sending from port 8000 on my machine to port 995, the hotmail pop3 port. And I'm getting nothing, and I'm out of ideas. Second block: Problem was apparently that I didn't write the quit command. The Code: public Program() { string str = string.Empty; string strTemp = string.Empty; using(TcpClient tc = new TcpClient()) { tc.Connect("pop3.live.com",995); using(SslStream sl = new SslStream(tc.GetStream())) { sl.AuthenticateAsClient("pop3.live.com"); using(StreamReader sr = new StreamReader(sl)) { using(StreamWriter sw = new StreamWriter(sl)) { sw.WriteLine("USER " + user); sw.Flush(); sw.WriteLine("PASS " + pass); sw.Flush(); sw.WriteLine("LIST"); sw.Flush(); sw.WriteLine("QUIT "); sw.Flush(); while((strTemp = sr.ReadLine()) != null) { if(strTemp == "." || strTemp.IndexOf("-ERR") != -1) { break; } str += strTemp; } } } } } Console.WriteLine(str); }

  Read the article

• WCF help, how can I expose a service over http, that calls another service over net.tcp?

  - by Hcabnettek

  Hi All, I have a WCF .svc file hosted in IIS. I want to use basicHTTP binding. This services job is to actually call another service over net.tcp. Everything works fine locally, but when I deployed, I'm getting this error. The provided URI scheme 'http' is invalid; expected 'net.tcp'. Parameter name: via Here is the server config <client> <endpoint address="net.tcp://localhost:9300/InternalInterfaceService" binding="netTcpBinding" bindingConfiguration="NetTcpBinding_IInternalInterfaceService" contract="IInternalInterfaceService" name="NetTcpBinding_IInternalInterfaceService"> <identity> <servicePrincipalName value="localhost" /> </identity> </endpoint> </client> <services> <service name="MyExternalService"> <endpoint address="" binding="basicHttpBinding" contract="IMyExternalService" /> </service> </services> And here is the config that svcutil generates <system.serviceModel> <bindings> <basicHttpBinding> <binding name="BasicHttpBinding_IMyExternalService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="None"> <transport clientCredentialType="None" proxyCredentialType="None" realm="" /> <message clientCredentialType="UserName" algorithmSuite="Default" /> </security> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="http://myserver.somesdomain.com/Services/MyExternalService.svc" binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IMyExternalService" contract="IMyInternalService" name="BasicHttpBinding_IMyExternalService" /> </client> </system.serviceModel> What do I need to do to wire this up correctly. I do not want to expose InternalInterfaceService over http. What am I doing incorrectly here? Any tips or suggestions are certainly appreciated. Thanks, ~ck

  Read the article

• H12 timeout error on Heroku

  - by snowangel

  Can anyone shed some light on what's causing this timeout error on Heroku (at 2012-07-08T08:58:33+00:00)? The docs say that it's because of some long running process. I've set config.assets.initialize_on_precompile = false in config/application.rb. EmBP-2:bc Emma$ heroku restart Restarting processes... done EmBP-2:bc Emma$ heroku logs --tail 2012-07-08T08:47:21+00:00 heroku[nginx]: 82.69.50.215 - - [08/Jul/2012:08:47:21 +0000] "GET /assets/application.js HTTP/1.1" 200 311723 "https://codicology.co.uk/" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7" codicology.co.uk 2012-07-08T08:47:21+00:00 heroku[nginx]: 127.0.0.1 - - [08/Jul/2012:08:47:21 +0000] "GET /assets/application.js HTTP/1.0" 200 1311615 "https://codicology.co.uk/" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7" codicology.co.uk 2012-07-08T08:51:32+00:00 heroku[slugc]: Slug compilation started 2012-07-08T08:54:05+00:00 heroku[api]: Release v145 created by [email protected] 2012-07-08T08:54:05+00:00 heroku[api]: Deploy 8814b2f by [email protected] 2012-07-08T08:54:05+00:00 heroku[web.1]: State changed from up to starting 2012-07-08T08:54:06+00:00 heroku[slugc]: Slug compilation finished 2012-07-08T08:54:09+00:00 heroku[web.1]: Stopping all processes with SIGTERM 2012-07-08T08:54:09+00:00 heroku[worker.1]: Stopping all processes with SIGTERM 2012-07-08T08:54:09+00:00 heroku[web.1]: Starting process with command `bundle exec unicorn -p 22429 -c ./config/unicorn.rb` 2012-07-08T08:54:10+00:00 app[worker.1]: [Worker(host:2046e0bf-e109-40f2-abdb-10f69d224483 pid:1)] Exiting... 2012-07-08T08:54:11+00:00 app[web.1]: I, [2012-07-08T08:54:11.320616 #1] INFO -- : reaped #<Process::Status: pid 8 exit 0> worker=1 2012-07-08T08:54:11+00:00 app[web.1]: I, [2012-07-08T08:54:11.376765 #1] INFO -- : master complete 2012-07-08T08:54:11+00:00 app[web.1]: I, [2012-07-08T08:54:11.376272 #1] INFO -- : reaped #<Process::Status: pid 5 exit 0> worker=0 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.011695 #1] INFO -- : worker=0 spawning... 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.011386 #1] INFO -- : listening on addr=0.0.0.0:22429 fd=3 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.017917 #5] INFO -- : worker=0 spawned pid=5 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.019309 #1] INFO -- : master process ready 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.018250 #5] INFO -- : Refreshing Gem list 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.016768 #1] INFO -- : worker=1 spawning... 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.020863 #8] INFO -- : Refreshing Gem list 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.020617 #8] INFO -- : worker=1 spawned pid=8 2012-07-08T08:54:12+00:00 app[worker.1]: SQL (2.9ms) UPDATE "delayed_jobs" SET locked_by = null, locked_at = null WHERE (locked_by = 'host:2046e0bf-e109-40f2-abdb-10f69d224483 pid:1') 2012-07-08T08:54:12+00:00 heroku[web.1]: Process exited with status 0 2012-07-08T08:54:13+00:00 heroku[web.1]: State changed from starting to up 2012-07-08T08:54:14+00:00 heroku[worker.1]: Process exited with status 0 2012-07-08T08:54:14+00:00 heroku[worker.1]: State changed from up to down 2012-07-08T08:54:14+00:00 heroku[worker.1]: State changed from down to starting 2012-07-08T08:54:20+00:00 heroku[worker.1]: Starting process with command `bundle exec rake jobs:work` 2012-07-08T08:54:20+00:00 heroku[worker.1]: State changed from starting to up 2012-07-08T08:54:28+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:54:28+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:54:28+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:54:28+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:54:33+00:00 app[web.1]: Starting the New Relic Agent. 2012-07-08T08:54:33+00:00 app[web.1]: Starting the New Relic Agent. 2012-07-08T08:54:33+00:00 app[web.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:54:33+00:00 app[web.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:54:34+00:00 app[web.1]: 2012-07-08T08:54:34+00:00 app[web.1]: 2012-07-08T08:54:34+00:00 app[web.1]: [DEVISE] Devise.use_salt_as_remember_token is deprecated and has no effect. Please remove it. 2012-07-08T08:54:34+00:00 app[web.1]: 2012-07-08T08:54:34+00:00 app[web.1]: [DEVISE] Devise.use_salt_as_remember_token is deprecated and has no effect. Please remove it. 2012-07-08T08:54:34+00:00 app[web.1]: 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant XLSX 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant XLSX 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:54:41+00:00 app[worker.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/Rakefile:10) 2012-07-08T08:54:41+00:00 app[worker.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/Rakefile:10) 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importadvancecsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpaymentcsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpurchasecsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importadvancecsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpaymentcsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpurchasecsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importsalecsv class 2012-07-08T08:54:46+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Profitarchive class 2012-07-08T08:54:46+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importsalecsv class 2012-07-08T08:54:46+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Profitarchive class 2012-07-08T08:54:46+00:00 app[web.1]: [paperclip] Duplicate URL for xml with :s3_eu_url. This will clash with attachment defined in Onixarchive class 2012-07-08T08:54:47+00:00 app[web.1]: [paperclip] Duplicate URL for xml with :s3_eu_url. This will clash with attachment defined in Onixarchive class 2012-07-08T08:54:48+00:00 app[web.1]: I, [2012-07-08T08:54:48.467693 #8] INFO -- : worker=1 ready 2012-07-08T08:54:48+00:00 app[web.1]: I, [2012-07-08T08:54:48.823800 #5] INFO -- : worker=0 ready 2012-07-08T08:54:48+00:00 app[worker.1]: Starting the New Relic Agent. 2012-07-08T08:54:48+00:00 app[worker.1]: New Relic Agent not running. 2012-07-08T08:54:48+00:00 app[worker.1]: [Worker(host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1)] New Relic Ruby Agent Monitoring DJ worker host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1 2012-07-08T08:54:48+00:00 app[worker.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:54:49+00:00 app[worker.1]: [Worker(host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1)] Starting job worker 2012-07-08T08:57:54+00:00 heroku[web.1]: State changed from up to starting 2012-07-08T08:57:56+00:00 heroku[web.1]: Stopping all processes with SIGTERM 2012-07-08T08:57:57+00:00 app[web.1]: I, [2012-07-08T08:57:57.047386 #1] INFO -- : reaped #<Process::Status: pid 5 exit 0> worker=0 2012-07-08T08:57:57+00:00 app[web.1]: I, [2012-07-08T08:57:57.047753 #1] INFO -- : reaped #<Process::Status: pid 8 exit 0> worker=1 2012-07-08T08:57:57+00:00 app[web.1]: I, [2012-07-08T08:57:57.047999 #1] INFO -- : master complete 2012-07-08T08:57:57+00:00 heroku[worker.1]: Stopping all processes with SIGTERM 2012-07-08T08:57:58+00:00 heroku[web.1]: Process exited with status 0 2012-07-08T08:57:58+00:00 app[worker.1]: [Worker(host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1)] Exiting... 2012-07-08T08:57:59+00:00 heroku[web.1]: Starting process with command `bundle exec unicorn -p 29766 -c ./config/unicorn.rb` 2012-07-08T08:58:01+00:00 app[worker.1]: SQL (27.9ms) UPDATE "delayed_jobs" SET locked_by = null, locked_at = null WHERE (locked_by = 'host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1') 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.070527 #1] INFO -- : listening on addr=0.0.0.0:29766 fd=3 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.070782 #1] INFO -- : worker=0 spawning... 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.074498 #1] INFO -- : worker=1 spawning... 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.075702 #1] INFO -- : master process ready 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.076732 #5] INFO -- : worker=0 spawned pid=5 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.076957 #5] INFO -- : Refreshing Gem list 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.089022 #8] INFO -- : worker=1 spawned pid=8 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.089299 #8] INFO -- : Refreshing Gem list 2012-07-08T08:58:02+00:00 heroku[worker.1]: Process exited with status 0 2012-07-08T08:58:02+00:00 heroku[worker.1]: State changed from up to down 2012-07-08T08:58:02+00:00 heroku[worker.1]: State changed from down to starting 2012-07-08T08:58:02+00:00 heroku[web.1]: State changed from starting to up 2012-07-08T08:58:10+00:00 heroku[worker.1]: Starting process with command `bundle exec rake jobs:work` 2012-07-08T08:58:11+00:00 heroku[worker.1]: State changed from starting to up 2012-07-08T08:58:28+00:00 app[worker.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/Rakefile:10) 2012-07-08T08:58:28+00:00 app[worker.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/Rakefile:10) 2012-07-08T08:58:33+00:00 heroku[router]: Error H12 (Request timeout) -> GET codicology.co.uk/ dyno=web.1 queue= wait= service=30000ms status=503 bytes=0 2012-07-08T08:58:33+00:00 heroku[nginx]: 127.0.0.1 - - [08/Jul/2012:08:58:33 +0000] "GET / HTTP/1.0" 503 601 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7" codicology.co.uk 2012-07-08T08:58:33+00:00 heroku[nginx]: 82.69.50.215 - - [08/Jul/2012:08:58:33 +0000] "GET / HTTP/1.1" 503 601 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7" codicology.co.uk 2012-07-08T08:58:42+00:00 app[worker.1]: New Relic Agent not running. 2012-07-08T08:58:42+00:00 app[worker.1]: [Worker(host:b5fa9243-6f9b-4de4-8f64-adab767fe4b0 pid:1)] New Relic Ruby Agent Monitoring DJ worker host:b5fa9243-6f9b-4de4-8f64-adab767fe4b0 pid:1 2012-07-08T08:58:42+00:00 app[worker.1]: Starting the New Relic Agent. 2012-07-08T08:58:42+00:00 app[worker.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:58:43+00:00 app[worker.1]: [Worker(host:b5fa9243-6f9b-4de4-8f64-adab767fe4b0 pid:1)] Starting job worker 2012-07-08T08:58:56+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:58:56+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:58:56+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:58:56+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:59:02+00:00 app[web.1]: Starting the New Relic Agent. 2012-07-08T08:59:02+00:00 app[web.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:59:02+00:00 app[web.1]: Starting the New Relic Agent. 2012-07-08T08:59:02+00:00 app[web.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:59:03+00:00 app[web.1]: 2012-07-08T08:59:03+00:00 app[web.1]: [DEVISE] Devise.use_salt_as_remember_token is deprecated and has no effect. Please remove it. 2012-07-08T08:59:03+00:00 app[web.1]: 2012-07-08T08:59:03+00:00 app[web.1]: 2012-07-08T08:59:03+00:00 app[web.1]: [DEVISE] Devise.use_salt_as_remember_token is deprecated and has no effect. Please remove it. 2012-07-08T08:59:03+00:00 app[web.1]: 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant XLSX 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant XLSX 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importadvancecsv class 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpaymentcsv class 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpurchasecsv class 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importsalecsv class 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Profitarchive class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importadvancecsv class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpaymentcsv class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpurchasecsv class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importsalecsv class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Profitarchive class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for xml with :s3_eu_url. This will clash with attachment defined in Onixarchive class 2012-07-08T08:59:24+00:00 app[web.1]: [paperclip] Duplicate URL for xml with :s3_eu_url. This will clash with attachment defined in Onixarchive class 2012-07-08T08:59:25+00:00 app[web.1]: I, [2012-07-08T08:59:25.555052 #5] INFO -- : worker=0 ready 2012-07-08T08:59:25+00:00 app[web.1]: 2012-07-08T08:59:25+00:00 app[web.1]: 2012-07-08T08:59:25+00:00 app[web.1]: Started GET "/" for 82.69.50.215 at 2012-07-08 08:59:25 +0000 2012-07-08T08:59:26+00:00 app[web.1]: Processing by PagesController#home as HTML 2012-07-08T08:59:26+00:00 app[web.1]: I, [2012-07-08T08:59:26.043501 #8] INFO -- : worker=1 ready 2012-07-08T08:59:26+00:00 app[web.1]: Rendered pages/home.html.haml within layouts/application (5.7ms) 2012-07-08T08:59:26+00:00 app[web.1]: (1.1ms) SELECT COUNT(*) FROM "delayed_jobs" 2012-07-08T08:59:26+00:00 app[web.1]: Rendered layouts/_header.html.erb (4.2ms) 2012-07-08T08:59:26+00:00 app[web.1]: Rendered layouts/_footer.html.haml (1.4ms) 2012-07-08T08:59:26+00:00 app[web.1]: Completed 200 OK in 326ms (Views: 258.4ms | ActiveRecord: 65.2ms)

  Read the article

• Why is Html.DropDownList() producing <select name="original_name.name"> instead of just <select name

  - by DanM

  I have an editor template whose job is to take a SelectList as its model and build a select element in html using the Html.DropDownList() helper extension. I'm trying to assign the name attribute for the select based on a ModelMetadata property. (Reason: on post-back, I need to bind to an object that has a different property name for this item than the ViewModel used to populate the form.) The problem I'm running into is that DropDownList() is appending the name I'm providing instead of replacing it, so I end up with names like categories.category instead of category. Here is some code for you to look at... SelectList.ascx <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<System.Web.Mvc.SelectList>" %> <%= Html.DropDownList( (string)ViewData.ModelMetadata.AdditionalValues["PropertyName"], Model) %> Resulting HTML <select id="SkillLevels_SkillLevel" name="SkillLevels.SkillLevel"> <option value="1">High</option> <option value="2">Med</option> <option selected="selected" value="3">Low</option> </select> Expected HTML <select id="SkillLevels_SkillLevel" name="SkillLevel"> <option value="1">High</option> <option value="2">Med</option> <option selected="selected" value="3">Low</option> </select> Also tried <%= Html.Encode((string)ViewData.ModelMetadata.AdditionalValues["PropertyName"])%> ...which resulted in "SkillLevel" (not "SkillLevels.SkillLevel"), proving that the data stored in metadata is correct. and <%= Html.DropDownList( (string)ViewData.ModelMetadata.AdditionalValues["PropertyName"], Model, new { name = (string)ViewData.ModelMetadata.AdditionalValues["PropertyName"] }) %> ...which still resulted in <select name=SkillLevels.Skilllevel>. Questions What's going on here? Why does it append the name instead of just using it? Can you suggest a good workaround? Update: I ended up writing a helper extension that literally does a find/replace on the html text: public static MvcHtmlString BindableDropDownListForModel(this HtmlHelper helper) { var propertyName = (string)helper.ViewData.ModelMetadata.AdditionalValues["PropertyName"]; var compositeName = helper.ViewData.ModelMetadata.PropertyName + "." + propertyName; var rawHtml = helper.DropDownList(propertyName, (SelectList)helper.ViewData.Model); var bindableHtml = rawHtml.ToString().Replace(compositeName, propertyName); return MvcHtmlString.Create(bindableHtml); }

  Read the article

• ASP.NET web forms as ASP.NET MVC

  - by lopkiju

  I am sorry for possible misleading about the title, but I have no idea for a proper title. Feel free to edit. Anyway, I am using ASP.NET Web Forms, and maybe this isn't how web forms is intended to be used, but I like to construct and populate HTML elements manually. It gives me more control. I don't use DataBinding and that kind of stuff. I use SqlConnection, SqlCommand and SqlDataReader, set SQL string etc. and read the data from the DataReader. Old school if you like. :) I do create WebControls so that I don't have to copy-paste every time I need some control, but mostly, I need WebControls to render as HTML so I can append that HTML into some other function that renders the final output with the control inside. I know I can render a control with control.RenderControl(writer), but this can only be done in (pre)Render or RenderContents overrides. For example. I have a dal.cs file where is stored all static functions and voids that communicate with the database. Functions mostly return string so that it can be appended into some other function to render the final result. The reason I am doing like this is that I want to separate the coding from the HTML as much as I can so that I don't do <% while (dataReader.Read()) % in HTML and display the data. I moved this into a CodeBehind. I also use this functions to render in the HttpHandler for AJAX response. That works perfectly, but when I want to add a control (ASP.NET Server control (.cs extension, not .ascx)) I don't know how to do that, so I see my self writing the same control as function that returns string or another function inside that control that returns string and replaces a job that would RenderContents do, so that I can call that function when I need control to be appended into a another string. I know this may not be a very good practice. As I see all the tutorials/videos about the ASP.NET MVC, I think it suite my needs as with the MVC you have to construct everything (or most of it) by your self, which I am already doing right now with web forms. After this long intro, I want to ask how can I build my controls so I can use them as I mentioned (return string) or I have to forget about server controls and build the controls as functions and used them that way? Is that even possible with ASP.NET Server Controls (.cs extension) or am I right when I said that I am not using it right. To be clear, I am talking about how to properly use a web forms, but to avoid data binders because I want to construct everything by my self (render HTML in Code Behind). Someone might think that I am appending strings like "some " + "string", which I am not. I am using StringBuilder for that so there's no slowness. Every opinion is welcome.

  Read the article

• Best practice to handle Parent Form Child Form relation using Presentation Model

  - by Rajarshi

  According to Presentation Model notes by Martin Fowler and also on MSDN documentation about Presentation Model, it is explained that the Presentation Model Class should be unaware of the UI class and similarly Business Model Class should be unaware of the Presentation Model class. The UI should databind extensively to the Presentation Model, the Presentation Model in turn will co-ordinate with one or more Domain/Business Model objects to get the job done. The Presentation Model basically presents the Domain Model data in a way to facilitate maximum data binding in UI, allowing the UI take as less decisions as possible and thus increase testability of Presentation behaviours. This also makes the presentation model class generic, i.e. agnostic of any particular UI technology. Now, consider there is a List form (say CustomerList) and there is another Root form (say Customer) and there is a Use Case of allowing to Edit a Customer from the CustomerList form on a button click. For simplicity of discussion, consider that some actions took place when Customer List is opened from menu (i.e. Customer menu clicked) and the Customer List has been shown from the Menu click event. Now as per the above Use Case, I need to open the Customer Root UI (single Customer) from the Customer List. How do I do that? Build necessary objects (BusinessModel, PresentationModel, UI) in click event of Edit button and call CustomerEdit UI from there? Build the CustomerEdit UI from Presentation Model Class and show UI from presentation model? this can be done in any of the two ways below - a. Create objects in the following sequence DomainModel-PresentationModel-UIForm b. Use Unity.Resolve(); Either ways, Presentation Model is violated as the P model now has to the refer the concrete UI assembly, where CustomerEdit is located. Also the P Model has to refer and use a WinForm directly making it less UI technology agnostic. Even though the violations are in theory and can be ignored, I would still seek the community's opinion about whether I am going wrong direction. Please suggest if there's a better way to call the Child Form from the List (Parent) Form. Rajarshi

  Read the article

• How to improve compare of item in sorted List<MyItem> with item before and after current item?

  - by Oliver

  Does anyone know about a good way to accomplish this task? Currently i'm doing it more ore less this way, but i'm feeling someway unhappy with this code, unable to say what i could immediately improve. So if anyone has a smarter way of doing this job i would be happy to know. private bool Check(List<MyItem> list) { bool result = true; //MyItem implements IComparable<MyItem> list.Sort(); for (int pos = 0; pos < list.Count - 1; pos++) { bool previousCheckOk = true; if (pos != 0) { if (!CheckCollisionWithPrevious(pos)) { MarkAsFailed(pos); result = false; previousCheckOk = false; } else { MarkAsGood(pos); } } if (previousCheckOk && pos != list.Count - 1) { if (!CheckCollisionWithFollowing(pos)) { MarkAsFailed(pos); result = false; } else { MarkAsGood(pos); } } } return result; } private bool CheckCollisionWithPrevious(int pos) { bool checkOk = false; var previousItem = _Item[pos - 1]; // Doing some checks ... return checkOk; } private bool CheckCollisionWithFollowing(int pos) { bool checkOk = false; var followingItem = _Item[pos + 1]; // Doing some checks ... return checkOk; } Update After reading the answer from Aaronaught and a little weekend to refill full mind power i came up with the following solution, that looks far better now (and nearly the same i got from Aaronaught): public bool Check(DataGridView dataGridView) { bool result = true; _Items.Sort(); for (int pos = 1; pos < _Items.Count; pos++) { var previousItem = _Items[pos - 1]; var currentItem = _Items[pos]; if (previousItem.CollidesWith(currentItem)) { dataGridView.Rows[pos].ErrorText = "Offset collides with item named " + previousItem.Label; result = false; sb.AppendLine("Line " + pos); } } dataGridView.Refresh(); return result; }

  Read the article

• Code Complete 2ed, composition and delegation.

  - by Arlukin

  Hi there. After a couple of weeks reading on this forum I thought it was time for me to do my first post. I'm currently rereading Code Complete. I think it's 15 years since the last time, and I find that I still can't write code ;-) Anyway on page 138 in Code Complete you find this coding horror example. (I have removed some of the code) class Emplyee { public: FullName GetName() const; Address GetAddress() const; PhoneNumber GetWorkPhone() const; ... bool IsZipCodeValid( Address address); ... private: ... } What Steve thinks is bad is that the functions are loosely related. Or has he writes "There's no logical connection between employees and routines that check ZIP codes, phone numbers or job classifications" Ok I totally agree with him. Maybe something like the below example is better. class ZipCode { public: bool IsValid() const; ... } class Address { public: ZipCode GetZipCode() const; ... } class Employee { public: Address GetAddress() const; ... } When checking if the zip is valid you would need to do something like this. employee.GetAddress().GetZipCode().IsValid(); And that is not good regarding to the Law of Demeter ([http://en.wikipedia.org/wiki/Law_of_Demeter][1]). So if you like to remove two of the three dots, you need to use delegation and a couple of wrapper functions like this. class ZipCode { public: bool IsValid(); } class Address { public: ZipCode GetZipCode() const; bool IsZipCodeValid() {return GetZipCode()->IsValid()); } class Employee { public: FullName GetName() const; Address GetAddress() const; bool IsZipCodeValid() {return GetAddress()->IsZipCodeValid()); PhoneNumber GetWorkPhone() const; } employee.IsZipCodeValid(); But then again you have routines that has no logical connection. I personally think that all three examples in this post are bad. Is it some other way that I haven't thougt about? //Daniel

  Read the article

• Good Email Notification Sending Service

  - by Philibert Perusse

  I need to send a few but important email notifications to individual users. For instance, when they register their software I send them a confirmation email. Right now, I am using 'sendmail' from my Perl CGI script to do the job. Most of my automated email are lost or marked as junk. Unfortunately, I am using shared hosting services and not a very good control over the SPF and SenderID DNS records. Even more bad, some other user of that shared server has been infected with some kind of SPAM-BOT and the IP is now blacklisted until further notice! Anyway I just don't want to deal with this kind of headache. I am looking for an online service that I will be able to subscribe to and pay something like 0.10$ per email I send with no monthly fees. I just need and API to be able to send the email from PHP or Perl code I will have to write. I have been looking around at all those "Email Sending Services" and they are all wrapped around creating campains and managing lists for bulk email marketing distribution and newsletters. But remember, I want to send an email notification to a "single" recipient. So far, I have look at MailChimp, SocketLabs, iContact, ConstantContact, StreamSend and so many others to no avail. I have seen one comment at Hackers News saying that MailChimp have an API for transactional e-mails (i.e. ad-hoc ones to welcome a user for example). So you're not just restricted to using them for bulk emails But I cannot find this in the API documentation supplied, maybe this was removed. Any suggestions out there. Here is a summary of my requirements: Allows ad hoc sending of email to a single recipient. Throughput may well be throttle I don't care, i am sending like 2-5 emails a day. API available in PHP or Perl to connect to that web service. Ideally I can send HTML formatted emails, otherwise I will live with text only. Solution not too expensive, between 0.01$ and 0.25$ per email would be acceptable. No recurring monthly fees.

  Read the article

• Contract developer trying to get outsourcing contract with current client.

  - by Mike

  I work for a major bank as a contract software developer. I've been there a few months, and without exception this place has the worst software practices I've ever seen. The software my team makes has no formal testing, terrible code (not reusable, hard to read, etc), minimal documentation, no defined development process and an absolutely sickening amount of waste due to bureaucratic overhead. Part of my contract is to maintain a group of thousands of very poorly written batch jobs. When one of the jobs fails (read: crashes), it's a developers job to look at the source, figure out what's wrong, fix it, and check it in. There is no quality assurance process or auditing of the results whatsoever. Once the developer says "it works" a manager signs off and it goes into production. What's disturbing is that these jobs essentially grab market data and put it into a third-party risk management system, which provides the bank with critical intelligence. I've discovered the disturbing truth that this has been happening since the 90s and nobody really has evidence the system is getting the correct data! Without going into details, an issue arose on Friday that was so horrible I actually stormed out of the place. I was ready to quit, but I decided to just get out to calm my nerves and possibly go back Monday. I've been reflecting today on how to handle this. I have realized that, in probably less than 6 months, I could (with 2 other developers) remake a large component of this system. The new system would provide them with, as primary benefits, a maintainable codebase less prone to error and a solid QA framework. To do it properly I would have to be outside the bank, the internal bureaucracy is just too much. And moreover, I think a bank is fundamentally not a place that can make good software. This is my plan. Write a report explaining in depth all the problems with their current system Explain why their software practices fail and generate a tremendous amount of error and waste. Use this as the basis for claiming the project must be developed externally. Write a high level development plan, including what resources I will require Hand 1,2,3 to my manager, hopefully he passes it up the chain. Worst case he fires me, but this isn't so bad. Convinced Executive decides to award my company a contract for the new system I have 8 years experience as a software contractor and have delivered my share of successful software products, but all working in-house for small/medium sized companies. When I read this over, I think I have a dynamite plan. But since this is the first time doing something this bold so I have my doubts. My question is, is this a good idea? If you think not, please spare no detail.

  Read the article

• Populating ComboBoxDataColumn items and values

  - by MarceloRamires

  I have a "populate combobox", and I'm so happy with it that I've even started using more comboboxes. It takes the combobox object by reference with the ID of the "value set" (or whatever you want to call it) from a table and adds the items and their respective values (which differ) and does the job. I've recently had the brilliant idea of using comboboxes in a gridview, and I was happy to notice that it worked JUST LIKE a single combobox, but populating all the comboboxes in the given column at the same time. ObjComboBox.Items.Add("yadayada"); //works just like ObjComboBoxColumn.Items.Add("blablabla"); But When I started planning how to populate these comboboxes I've noticed: There's no "Values" property in ComboBoxDataColumn. ObjComboBox.Values = whateverArray; //works, but the following doesn't ObjComboBoxColumn.Values = whateverArray; Questions: 0 - How do I populate it's values ? (I suspect it's just as simple, but uses another name) 1 - If it works just like a combobox, what's the explanation for not having this attribute ? -----[EDIT]------ So I've checked out Charles' quote, and I've figured I had to change my way of populating these bad boys. Instead of looping through the strings and inserting them one by one in the combobox, I should grab the fields I want to populate in a table, and set one column of the table as the "value", and other one as the "display". So I've done this: ObjComboBoxColumn.DataSource = DTConfig; //Double checked, guaranteed to be populated ObjComboBoxColumn.ValueMember = "Code"; ObjComboBoxColumn.DisplayMember = "Description"; But nothing happens, if I use the same object as so: ObjComboBoxColumn.Items.Add("StackOverflow"); It is added. There is no DataBind() function. It finds the two columns, and that's guaranteed ("Code" and "Description") and if I change their names to nonexistant ones it gives me an exception, so that's a good sign. -----[EDIT]------ I have a table in SQL Server that is something like code  |  text —————    1    | foo    2    | bar It's simple, and with other comboboxes (outside of gridviews) i've successfully populated looping through the rows and adding the texts: ObjComboBox.Items.Add(MyDataTable.Rows[I]["MyColumnName"].ToString()); And getting every value, adding it into an array, and setting it like: ObjComboBox.Values = MyArray; I'd like to populate my comboboxColumns just as simply as I do with comboboxes.

  Read the article

• Managing a difficult manager

  - by griegs

  I have a situation here at work. We are redeveloping our basic architecture across the entire company. Currently we have the following hierarchy; SQL Database <= Stored Procs not allowed. nHibernate Classes to convert nHibernate into our own objects Web Service <= for all external and [internal] calls. Class to take objects from Web Service and back into our own objects and then… Normal nTier application architecture such as Data Transformation Layer, Business layer etc. Within the database, when we are writing a hierarchy of objects to the database, say for example; Order Person Details Address Product Other We need to serialise the object and save it, in its entirety, to an image field in a table. No attempt has been made to store the objects in their own tables so that we can do useful stuff like report on it. This is an architecture that was implemented [way] before I started and as you can probably appreciate, is a complete nightmare not to mention slow as a wet weekend. We’re not even allowed to have stored procs within SQL server because in my boss’s last job they had a hundred or so and he had a problem identifying them all so therefore all stored procs are the devil. Now the same person that developed the above architecture has developed the new one. It came as no surprise that he’s essentially used the same framework only now it’s using DotNet 3.5 with interfaces and generics. We still have to go through web services, still need to serialise (everything), still not allowed to use stored procs etc. In fact, we’re only barely able to bang two rocks together here. He says to us that the framework is open for discussion but when you discuss it, unless you approve of his design, you are told flatly “No”. He simply won’t listen to any other suggestions. Even when you show him demo applications of his proposed architecture v’s yours and he can see the speed difference, he still won’t take that on board. So I guess my question is, and I know others have experienced the same things out there, how do I get through to someone like this? How do you convince someone to ditch Web Services for internal calls and applications? How do you demonstrate, and make it stick, that stored procs are a better way to go than ad-hoc sql statements? This is killing me. I don’t want to repeat the mistakes of the past and I certainly don’t want to write code that I know is going to be slow and cumbersome. Help!

  Read the article

• SSH login with expect(1). How to exit expect and remain in SSH?

  - by Koroviev

  So I wanted to automate my SSH logins. The host I'm with doesn't allow key authentication on this server, so I had to be more inventive. I don't know much about shell scripting, but some research showed me the command 'expect' and some scripts using it for exactly this purpose. I set up a script and ran it, it worked perfectly to login. #!/usr/bin/env expect -f set password "my_password" match_max 1000 spawn ssh -p 2222 "my_username"@11.22.11.22 expect "*?assword:*" send -- "$password\r" send -- "\r" expect eof Initially, it runs as it should. Last login: Wed May 12 21:07:52 on ttys002 esther:~ user$ expect expect-test.exp spawn ssh -p 2222 [email protected] [email protected]'s password: Last login: Wed May 12 15:44:43 2010 from 20.10.20.10 -jailshell-3.2$ But that's where the success ends. Commands do not work, but hitting enter just makes a new line. Arrow keys and other non-alphanumeric keys produce symbols like '^[[C', '^[[A', '^[OQ' etc.[1] No other prompt appears except the two initially created by the expect script. Any ignored commands will be executed by my local shell once expect times out. An example: -jailshell-3.2$ whoami ls pwd hostname (...time passes, expect times out...) esther:~ user$ whoami user esther:~ ciaran$ ls Books Documents Movies Public Code Downloads Music Sites Desktop Library Pictures expect-test.exp esther:~ ciaran$ pwd /Users/ciaran esther:~ ciaran$ hostname esther.local As I said, I have no shell scripting experience, but I think it's being caused because I'm still "inside of" expect, but not "inside of" SSH. Is there any way to terminate expect once I've logged in, and have it hand over the SSH session to me? I've tried commands like 'close' and 'exit', after " send -- "\r" ". Yeah, they do what I want and expect dies, but it vindictively takes the SSH session down with it, leaving me back where I started. What I really need is for expect to do its job and terminate, leaving the SSH session back in my hands as if I did it manually. All help is appreciated, thanks. [1] I know there's a name for this, but I don't know what it is. And this is one of those frightening things which can't be googled, because the punctuation characters are ignored. As a side question, what's the story here?

  Read the article

• Occasional Date or timezone discrepancy in hudson or maven with jodatime

  - by TheStijn

  hi, I hope following explanation will make sense because it's a weird problem we're facing and hard to describe. We have a maven project which gets build in hudson and that contains some unit tests where dates are used and asserted. The hudson server runs on solaris. Now, occasionally (like 30% of the times) the unit tests using dates fail because 3,5 hours are deducted from the specified time in the unit test and hence asserts start failing. The other 70% everything works fine although nothing at all changed in the code and we run the hudson job several times an hour. I add following code to a unittest to check the time: @Test public void testDate() { System.out.println("new DateMidnight(2011, 1, 5).toDate();"); System.out.println(new DateMidnight(2011, 1, 5).toDate()); System.out.println(new DateMidnight(2011, 1, 5).toDate().getTime()); Calendar cal = Calendar.getInstance(); cal.set(Calendar.YEAR, 2011); cal.set(Calendar.MONTH, 0); cal.set(Calendar.DAY_OF_MONTH, 5); cal.set(Calendar.HOUR, 0); cal.set(Calendar.MINUTE, 0); cal.set(Calendar.SECOND, 0); cal.set(Calendar.MILLISECOND, 0); System.out.println("cal.getTime();"); System.out.println(cal.getTime()); System.out.println(cal.getTime().getTime()); } So basically it should print the same thing when using jodatime or plain old Calendar. This is the case in 70% of the runs; for the other 30% I get following printouts: Running TestSuite new DateMidnight(2011, 1, 5).toDate(); Tue Jan 04 21:30:00 MET 2011 1294173000000 cal.getTime(); Wed Jan 05 12:00:00 MET 2011 1294225200000 Local maven tests never appear the pose this problem and we can't figure out what could be the cause of it. Especially, we can't think of a single reason why the tests sometimes pass and sometimes fail without changing any code nor hudson or server setting. Also, we run the maven install with cobertura which means that the unit tests are run twice. It happens also that they pass the first time and fail the second time or the other way around or that they fail both times. Thanks for any help, Stijn

  Read the article

• Cases of companies taking IP rights of your own personal projects developed outside company time

  - by GSS

  Hi, I have heard of cases where a developer working for a company is also making his own personal projects in his own time, using his own equipment yet the company he works for tries to claim ownership for the project. I really find this annoying, and bang out of order. It should also be illegal. I am in this position (work for a company and working on my own systems - from small class libraries used to practise what I learn in my exam revision to a large commercial-scale system). While I don't know if the company will try to take ownership, all I know is they say they do not want a conflict of interest. Fair enough, my system is developed in my own time using my own equipment. They also say that work time should be for work only, which it is. Funny thing that as work is so boring, easy and slow that I have plenty of free time, which I wish I could spend on something productive - said system. The problem is, my company does not take hiring technical talent seriously. This is my first job, I am a junior coder (but my status/position doesn't really reflect what I can do), but I am the only developer. Likewise with the guy who controls Windows Server. As the contract does not say anything about taking ownership, I would assume they would. They would try to milk my success (I've made a good impression so I am sure they would). How can this be allowed? Are there any examples of this happening to any fellow Stacker here? It really makes my blood boil. What I find funny is that my company hardly has the expertise and resources to even be able to successfully run a project of my size. What I do at work is an ASP.NET application consisting of five pages, and even then there are flaws in the project. If I told them that they would also have to take responsibility for flaws in the project, then they would think twice! It's exactly because of this I save the best code for myself and at work I write rubbish code full of code smells. The company don't really care about error handling, as long as the business functionality works (ie a scheduled email sends, but there is no error handling). They'd think twice when they see the embarassment and business cost of a YSOD...

  Read the article

• What was your the most impressive technical programming achievement performed to impress a romantic

  - by DVK

  OK, so the archetypal human story is for a guy to go out and impress the girl with some wonderful achievement like slaying a dragon or building a monument or conquering neighboring tribe. This being enlightened 21st century on SO, let's morph this into a: StackOverflower performing a feat of programming to impress a romantic interest. There are two ways to do this: Technical achievement: Impressing a person with suitable background/understanding of programming with actual coding powerss you displayed. A dumb movie example would be that kid in "Hackers" move showing off his hacking skills in front of Angeline Jolie. Artistic achievement: Impressing a person with a result of running said code, whether they understand just how incredible the code itself is. An example is the animated ANSI rose (for a guy who actually wrote the ANSI code) This question is only about the first kind (technical achievements) - e.g. the person of interest was presented with impressive code/design that (s)he was able to properly appreciate. Rules (what doesn't qualify): The target audience must have been a person of romantic interest (prospective or present significant other or random hook-up). E.g. showing your program to your sister who's also a software developer doesn't count. The achievement must have been done specifically with the goal to impress such a person. However, it is OK if the achievement was done to impress a generic qualifying person, not someone specific. Although... if you write code to impress girls in general, I'd say "get a better idea of the opposite sex" The achievement must have been done with the goal of impressing the person. In other words, if you would have done it without romantic interest's knowledge anyway, it doesn't count. As examples, the following does not count: programming for your job. Programming for a coding contest. Open Source program that you'd have done anyway. The precise nature of the awesomeness of the achievement is somewhat irrelevant - from learning entire J2EE in 2 days to writing fancy game engine to implementing Python compiler in LOGO. As long as it's programming/software development related. The achievement should preferably be something other people would rank highly as well. If your date was impressed with your skill at calculating Fibonacci sequence without recursive function calls, it doesn't mean most developers will be. But it does mean you need to start finding better things to do on dates ;)

  Read the article

• Why do I get a NullPointerException when initializing Spring

  - by niklassaers

  Hi guys, I've got a problem running a batch job on my server, whereas it runs fine from Eclipse on my development workstation. I've got my Spring environment set up using Roo, made an entity, and make a batch that does some work, and test it well on my develompent box. I initialize my context and do the work, but when I run my batch on the server, the context isn't initialized properly. Here's the code: public class TestBatch { private static ApplicationContext context; @SuppressWarnings("unchecked") public static void main(final String[] args) { context = new ClassPathXmlApplicationContext("/META-INF/spring/applicationContext.xml"); try { @SuppressWarnings("unused") TestBatch app = new TestBatch(); } catch (Exception ex) { ex.printStackTrace(); } } public void TestBatch() { /** Do Something using the context **/ } } And here's the log and exception: 2010-02-16 11:54:16,072 [main] INFO org.springframework.context.support.ClassPathXmlApplicationContext - Refreshing org.springframework.context.support.ClassPathXmlApplicationContext@6037fb1e: startup date [Tue Feb 16 11:54:16 CET 2010]; root of context hierarchy Exception in thread "main" java.lang.ExceptionInInitializerError at org.springframework.context.support.AbstractRefreshableApplicationContext.createBeanFactory(AbstractRefreshableApplicationContext.java:194) at org.springframework.context.support.AbstractRefreshableApplicationContext.refreshBeanFactory(AbstractRefreshableApplicationContext.java:127) at org.springframework.context.support.AbstractApplicationContext.obtainFreshBeanFactory(AbstractApplicationContext.java:458) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:388) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:139) at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:83) at tld.mydomain.myproject.batch.TestBatch.main(TestBatch.java:51) Caused by: java.lang.NullPointerException at org.springframework.beans.factory.support.DefaultListableBeanFactory.<clinit>(DefaultListableBeanFactory.java:103) ... 7 more Any idea or hints as to what's going on? My classpath is set to $PROJECTHOME/target/classes, and all my dependencies are in $PROJECTHOME/target/lib, and I execute using "export CLASSPATH=$PROJECTHOME/target/classes; java -Djava.endorsed.dirs=$PROJECTHOME/target/lib tld.mydomain.myproject.batch.TestBatch" Is there anything in my setup that looks very wrong? When I run this from Eclipse, no problems, but when I deploy it on the server where I want to run it and run it as described above, I get this problem. Because it runs from Eclipse, I believe my config files are all right, but how can I debug what's causing this? Perhaps I have some config errors or a mismatch between the server and the development workstation after all? Or is this a really weird way of saying file not found, and if so, how do I make sure it finds the correct file?? I'm really looking forward to hearing your suggestions as to how to tackle this problem. Cheers Nik

  Read the article

• SSIS DTS Package flat file error - "The file name specified in the connection was not valid"

  - by MisterZimbu

  I have a pretty basic SSIS package that is attempting to read a file hosted on a share, and import its contents to a database table. The package runs fine when I run it manually within SSIS. However, when I set up a SQL Agent job and attempt to execute it, I get the following error: Executed as user: DOMAIN\UserName. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:14:17 AM Error: 2010-05-03 10:14:17.75 Code: 0xC001401E Source: DataImport Connection manager "Data File Local" Description: The file name "\10.1.1.159\llpf\datafile.dat" specified in the connection was not valid. End Error Error: 2010-05-03 10:14:17.75 Code: 0xC001401D Source: DataAnimalImport Description: Connection "Data File Local" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:14:17 AM Finished: 10:14:17 AM Elapsed: 0.594 seconds. The package execution failed. The step failed. This leads me to believe it's a permissions issue, but every attempt I've made to fix it has failed. What I've tried so far: Run as the SQL Agent account (DOMAIN\SqlAgent) - yields same error. DOMAIN\SqlAgent has "Full Control" permissions on both the share and the uploaded file. Set up a proxy account with a different account's credentials (DOMAIN\Account) - yields same error. Like above, "Full Control" permissions were given over the share to that account. Gave "Everyone" full control permissions over the share (temporarily!). Yielded same error. Manually copied the file to a local path and tested with the SQL Agent account. Worked properly. Added an ActiveX script task that would first copy the remotely hosted file to a local path, and then have the DTS package reference the local file. Gave a completely nondescriptive (even by SSIS standards) error when trying to run the script. Set up a proxy account, using my own personal account's credentials - worked correctly. However, this is not an acceptable solution as there are password policies in place on my account, as well as being a bad practice to set things up this way in general. Any ideas? I'm still convinced it's a permissions issue. However, what I've read from various searches more or less says giving the executing account permissions on the share should work. However, this is not the case here (unless I'm missing something obscure when I'm setting up permissions on the share).

  Read the article

• Amusing or Sad? Network Solutions

  - by dbasnett

  When I got sick my email ended up in every drug sellers email list. Some days I get over 200 emails selling everything from Viagra to Xanax. Either they don't know what my condition is or they are telling me you are a goner, might as well chill-ax and have a good time. In order to cut down on the mail being downloaded I thought I would add all of the Junk email senders from Outlook to my Network Solution mail server. Much to my amazement I could not find that import Spammers button, so I submitted a tech support request. Here is the response: Thank you for contacting Network Solutions Customer Service Department. We are committed to creating the best Customer experience possible. One of the first ways we can demonstrate our commitment to this goal is to quickly and efficiently handle your recent request. We apologize for any inconvenience this might have caused you. With regard to your concern, please be advised that we cannot import blocked senders in to you e-mail servers. An alternative option is for you to create a Custom Filter that filters unwanted e-mails. To create a Custom Filter: Open a Web browser (e.g., Netscape, Microsoft Internet Explorer, etc.). Type mail.[domain name].[ext] in the address line. Login to your Network Solutions email account. Click on the Configuration left menu tab. Click on the Custom Filter link. Type the rule name. blah, blah, blah Basically add them one at a time. "We are committed to creating the best Customer experience possible." No you are not. You are trying to squeeze every nickle you can out of me. "With regard to your concern, please be advised that we cannot import blocked senders in to you e-mail servers." Maybe I should apply for a job to write those ten complicated lines of code... Maybe I should question my choice of vendors, because if they truly "cannot" then they are to stupid to have my business. It is both amusing and sad. I'll be posting this in every forum I am a member of.

  Read the article

• Creating a variable list Pashua, OS X & Bash.

  - by S1syphus

  First of all, for those that don't know pashua is a tool for creating native Aqua dialog windows. An example of what a window config looks like is # pashua_run() # Define what the dialog should be like # Take a look at Pashua's Readme file for more info on the syntax conf=" # Set transparency: 0 is transparent, 1 is opaque *.transparency=0.95 # Set window title *.title = Introducing Pashua # Introductory text tb.type = text tb.default = "HELLO WORLD" tb.height = 276 tb.width = 310 tb.x = 340 tb.y = 44 if [ -e "$icon" ] then # Display Pashua's icon conf="$conf img.type = image img.x = 530 img.y = 255 img.path = $icon" fi if [ -e "$bgimg" ] then # Display background image conf="$conf bg.type = image bg.x = 30 bg.y = 2 bg.path = $bgimg" fi pashua_run "$conf" echo " tb = $tb" The problem is, Pashua can't really get output from stdout, but it can get arguments. Following on from what Dennis Williamson posted here. What ideally it should do is generate an output file based on information from a text file, To executed in pashua_run ore add the pashua_run around the window argument: count=1 while read -r i do echo "AB${count}.type = openbrowser" echo "AB${count}.label = Choose a master playlist file" echo "AB${count}.width=310" echo "AB${count}.tooltip = Blabla filesystem browser" echo "some text with a line from the file: $i" (( count++ )) done < TEST.txt >> long.txt SO the output is AB1.type = openbrowser AB1.label = Choose a master playlist file AB1.width=310 AB1.tooltip = Blabla filesystem browser some text with a line from the file: foo AB2.type = openbrowser AB2.label = Choose a master playlist file AB2.width=310 AB2.tooltip = Blabla filesystem browser some text with a line from the file: bar AB3.type = openbrowser AB3.label = Choose a master playlist file AB3.width=310 AB3.tooltip = Blabla filesystem browser some text with a line from the file: dev AB4.type = openbrowser AB4.label = Choose a master playlist file AB4.width=310 AB4.tooltip = Blabla filesystem random So if there is a clever way to get the output of that and place it into pashua run would be cool, on the fly: I.E load te contents of TEST.txt and generate the place it into pashua_run, I've tried using cat and opening the file... but because it's in Pashua_run it doesn't work, is there a smart way to break out then back in? Or the second way which I was thinking, was create get the output then append it into the middle text file containing the pashua runtime, then execute it, maybe slightly hacky, but I would imagine it will do the job. Any ideas? ++ I know I probably could make my life a lot easier, by doing this in actionscript and cocoa, although at present don't have time for such a learning curve, although I do plan to get round to it.

  Read the article

• Network communication for a turn based board game

  - by randooom

  Hi all, my first question here, so please don't be to harsh if something went wrong :) I'm currently a CS student (from Germany, if this info is of any use ;) ) and we got a, free selectable, programming assignment, which we have to write in a C++/CLI Windows Forms Application. My team, two others and me, decided to go for a network-compatible port of the board game Risk. We divided the work in 3 Parts, namely UI, game logic and network. Now we're on the part where we have to get everything working together and the big question mark is, how to get the clients synchronized with each other? Our approach so far is, that each client has all information necessary to calculate and/or execute all possible actions. Actually the clients have all information available at all, aside from the game-initializing phase (add players, select map, etc.), which needs one "super-client" with some extra stuff to control things. This is the standard scenario of our approach: player performs action, the action is valid and got executed on the players client action is sent over the network action is executed on the other clients The design (i.e. no or code so far) we came up with so far, is something like the following pseudo sequence diagram. Gui, Controller and Network implement all possible actions (i.e. all actions which change data) as methods from an interface. So each part can implement the method in a way to get their job done. Example with Action(): On the player side's Client: Player-->Gui.Action() Gui-->Controller.Action() Controller-->Logic.Action (Logic.Action() == NoError)? Controller-->Network.Action() Network-->Parser.ParseAction() Network.Send(msg) On all other clients: Network.Recv(msg) Network-->Parser.Deparse(msg) Parser-->Logic.Action() Logic-->Gui.Action() The questions: Is this a viable approach to our task? Any better/easier way to this? Recommendations, critique? Our knowledge (so you can better target your answer): We are on the beginner side, in regards to programming on a somewhat larger projects with a small team. All of us have some general programming experience and basic understanding of the .Net Libraries and Windows Forms. If you need any further information, please feel free to ask.

  Read the article

• Write binary stream to browser using PHP

  - by Dave Jarvis

  Background Trying to stream a PDF report written using iReport through PHP to the browser. The general problem is: how do you write binary data to the browser using PHP? Working Code The following code does the job, but (for many reasons) it is not as efficient as it should be (the code writes a file then sends the file contents the browser). // Load the MySQL database driver. // java( 'java.lang.Class' )->forName( 'com.mysql.jdbc.Driver' ); // Attempt a database connection. // $conn = java( 'java.sql.DriverManager' )->getConnection( "jdbc:mysql://localhost:3306/climate?user=$user&password=$password" ); // Extract parameters. // $params = new java('java.util.HashMap'); $params->put('DistrictCode', '101'); $params->put('StationCode', '0066'); $params->put('CategoryCode', '010'); // Use the fill manager to produce the report. // $fm = java('net.sf.jasperreports.engine.JasperFillManager'); $pm = $fm->fillReport($report, $params, $conn); header('Cache-Control: no-cache private'); header('Content-Description: File Transfer'); header('Content-Disposition: attachment, filename=climate-report.pdf'); header('Content-Type: application/pdf'); header('Content-Transfer-Encoding: binary'); header('Content-Length: ' . strlen( $result ) ); $path = realpath( "." ) . "/output.pdf"; $em = java('net.sf.jasperreports.engine.JasperExportManager'); $result = $em->exportReportToPdfFile($pm,$path); readfile( $path ); $conn->close(); Non-working Code To remove the slight redundancy (i.e., write directly to the browser), the following code looks like it should work, but it does not: $em = java('net.sf.jasperreports.engine.JasperExportManager'); $result = $em->exportReportToPdf($pm); header('Content-Length: ' . strlen( $result ) ); echo $result; Content is sent to the browser, but the file is corrupt (it begins with the PDF header) and cannot be read by any PDF reader. Question How can I take out the middle step of writing to the file and write directly to the browser so that the PDF is not corrupted? Thank you!

  Read the article

< Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >