Search Results

Search found 7221 results on 289 pages for 'platform independence'.

Page 268/289 | < Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >

• A new MEF error I've not seen before -- "The export is not assignable to type..."

  - by Dave

  I was very surprised to get this error today, as it's one that I've never encountered before. Everything in the code looked okay, so I did some searches. The previous questions and their respective answers didn't help. This one was solved when the poster made sure his assembly references were consistent. I don't have this issue right now because I'm currently referencing another project in my solution. This one was solved when the poster was instructed to use ImportMany, but I am already using it (I think properly, too) to try to load multiple plugins This one was solved when the poster realized that there was a platform target mismatch. I've already gone through my projects to ensure that everything targets x86. So here's what I am trying to do. I have a plugin that owns a connection to a device. I might also need to be able to share that connection with another plugin. I decided that the cleanest way to do this was to create an interface that would allow the slave plugin to request its own connection to the device. Let's just call it IConnectionSharer. If the slave plugin does not need to borrow this connection and has its own, then it should use its own implementation of IConnectionSharer to connect to the device. My "master" plugin (the one that owns the connection to the device) implements IConnectionSharer. It also exports this via ExportAttribute. My "slave" plugin assembly defines a class that also implements and exports IConnectionSharer. When the application loads, the intent is for my slave plugin, via MEF, to enumerate all IConnectionSharers and store them in an IEnumerable<IConnectionSharer>. It does so like this: [ImportMany] public IEnumerable<IConnectionSharer> AllSharedConnections { get; set; } But during part composition, I get the error the export 'Company.MasterPlugin (ContractName="IConnectionSharer")' is not assignable to type 'IConnectionSharer'. The error message itself seems clear enough -- it's as if MEF thinks my master plugin doesn't inherit from IConnectionSharer... but it does! Can anyone suggest further debugging strategies? I'm going to start the painful process of single stepping through the MEF source.

  Read the article

• What is the proper way to wrap this php loop around the javascript

  - by zac

  Hi, I am mashing together the Google Maps 2 script with a Wordpress loop so there is a CMS platform for the map data. I have this working fine : var point = new GLatLng(48.5139,-123.150531); var marker = createMarker(point,"Lime Kiln State Park", '<?php $post_id = 182; $my_post = get_post($post_id); $mapTitle = $my_post->post_title; $mapIMG = get_post_meta($post_id, 'mapImage', true); $snip = get_post_meta($post_id, 'mapExcerpt', true); echo "<div class=\"span-12\">"; echo "<div class=\"mapTitle\">"; echo $mapTitle; echo "</div>"; echo "<img class=\"mapImage\" src=\""; echo bloginfo('url'); echo "/wp-content/files_mf/"; echo $mapIMG; echo "\" /> "; echo "<div class=\"mapContent\">"; echo $snip; echo "</div>"; echo "<div class=\"moreLink\">"; echo "<a href=\""; echo $permalink = get_permalink( $post_id ); echo "\">Find out more &raquo; </a>"; echo "</div>"; echo "</div>"; ?>') map.addOverlay(marker); However I am hoping to also be able to include the two variables at the start within the php loop so that both of those can also be generated by custom fields. Can someone please show me that the proper way to write this would be so that all of the data can be pulled in from fields within that post id? So the lat/long and title could also be set from within the post 182 fields.

  Read the article

• C++ Vector vs Array (Time)

  - by vsha041

  I have got here two programs with me, both are doing exactly the same task. They are just setting an boolean array / vector to the value true. The program using vector takes 27 seconds to run whereas the program involving array with 5 times greater size takes less than 1 s. I would like to know the exact reason as to why there is such a major difference ? Are vectors really that inefficient ? Program using vectors #include <iostream> #include <vector> #include <ctime> using namespace std; int main(){ const int size = 2000; time_t start, end; time(&start); vector<bool> v(size); for(int i = 0; i < size; i++){ for(int j = 0; j < size; j++){ v[i] = true; } } time(&end); cout<<difftime(end, start)<<" seconds."<<endl; } Runtime - 27 seconds Program using Array #include <iostream> #include <ctime> using namespace std; int main(){ const int size = 10000; // 5 times more size time_t start, end; time(&start); bool v[size]; for(int i = 0; i < size; i++){ for(int j = 0; j < size; j++){ v[i] = true; } } time(&end); cout<<difftime(end, start)<<" seconds."<<endl; } Runtime - < 1 seconds Platform - Visual Studio 2008 OS - Windows Vista 32 bit SP 1 Processor Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz Memory (RAM) 1.00 GB Thanks Amare

  Read the article

• Error in connecting Eclipse to SQL Server

  - by user3721900

  This is the syntax error Jun 10, 2014 5:15:51 PM org.apache.catalina.core.AprLifecycleListener init INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files (x86)\Java\jre7\bin;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:/Program Files (x86)/Java/jre7/bin/client;C:/Program Files (x86)/Java/jre7/bin;C:/Program Files (x86)/Java/jre7/lib/i386;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;C:\Program Files (x86)\AMD APP\bin\x86_64;C:\Program Files (x86)\AMD APP\bin\x86;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files\Microsoft\Web Platform Installer\;C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\;C:\Program Files (x86)\Windows Kits\8.0\Windows Performance Toolkit\;C:\Program Files\Microsoft SQL Server\110\Tools\Binn\;C:\Program Files (x86)\Microchip\MPLAB C32 Suite\bin;C:\Program Files\Java\jdk1.7.0_25\bin;C:\Program Files (x86)\Java\jdk1.7.0_03\bin;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Google\google_appengine\;C:\Users\Patrick\Desktop\2013-2014 2nd Sem Files\Eclipsee\eclipse;;. Jun 10, 2014 5:15:51 PM org.apache.tomcat.util.digester.SetPropertiesRule begin WARNING: [SetPropertiesRule]{Server/Service/Engine/Host/Context} Setting property 'source' to 'org.eclipse.jst.jee.server:B2B' did not find a matching property. Jun 10, 2014 5:15:51 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["http-bio-8080"] Jun 10, 2014 5:15:51 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["ajp-bio-8009"] Jun 10, 2014 5:15:51 PM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 544 ms Jun 10, 2014 5:15:51 PM org.apache.catalina.core.StandardService startInternal INFO: Starting service Catalina Jun 10, 2014 5:15:51 PM org.apache.catalina.core.StandardEngine startInternal INFO: Starting Servlet Engine: Apache Tomcat/7.0.42 Jun 10, 2014 5:15:52 PM org.apache.coyote.AbstractProtocol start INFO: Starting ProtocolHandler ["http-bio-8080"] Jun 10, 2014 5:15:52 PM org.apache.coyote.AbstractProtocol start INFO: Starting ProtocolHandler ["ajp-bio-8009"] Jun 10, 2014 5:15:52 PM org.apache.catalina.startup.Catalina start INFO: Server startup in 374 ms com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near '`'. This is my code package b2b.fishermall; public class ConnectionString extends SqlStringCommands { public String getDriver(){ return "com.microsoft.sqlserver.jdbc.SQLServerDriver"; } public String getURL() { return "jdbc:sqlserver://localhost:1433;databaseName=B2B;integratedSecurity=true;"; } public String getUsername() { return ""; } public String getDbPassword() { return ""; } }

  Read the article

• Could not load file or assembly ... or one of its dependencies. An attempt was made to load a progra

  - by Dan

  I am getting the following error message when compiling or attempting to run my application on Windows 7 64 bit. I've scoured the internet and many people have the same error message however none of the solutions address my problem or situation. Using VS 2010. Error 38 Could not load file or assembly 'file:///D:/Projects/Windows Projects/Weld/Components/FileAttachments/FileAttachments/FileAttachments/bin/x86/Debug/FileAttaching.dll' or one of its dependencies. An attempt was made to load a program with an incorrect format. Line 1212, position 5. D:\Projects\Windows Projects\Weld\Weld\Weld.UI\frmMain.resx 1212 5 Weld.UI Ok, so I have 2 projects a UI project and a FileAttachment project. UI project has a reference to FileAttachment project. When I compile UI project in "Any CPU" mode everything works fine and it runs. I assume 'Any CPU' will run in 64bit mode when I compile as that is the platform I am using. I want to run/compile as x86 so I try to do that, so I change configuration for all projects to x86 and verify that these configurations are compiling to x86. I compile and get the error as stated above. I find it odd that it compiles and works fine in 64bit but not 32bit. However when compiled and deployed to users as 'Any CPU', if these users have x86 it still works for them no problem. I just can't compile or run as x86 on my PC. Again, I can compile as Any CPU and deploy to a 32bit PC no problem. Neither project are referencing any 64bit only dlls. Both projects are verified to be targetting 32bit dll's and .NET Framework assemblies. I need to compile and run this locally under 32bit mode. I need JIT edit/continue among other things. Here is the line of code in the resx file that is causing the problem: </data> <data name="Appearance17.Image" type="System.Drawing.Bitmap, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64"> <value> The resx file is verified to be generated for .NET 2.0 amnd is only referencing .NET 2.0 assemblies and not .NET 4.0 versions. Any ideas here? I've searched the net and have found hundreds of people with the same error message but a different problem.

  Read the article

• No image displayed in Fancybox

  - by seansean11

  I am having trouble getting fancybox to display its corresponding images on a website that I'm building http://www.nomadicdrift.com/test/kaniwa#events . It's a custom one page portfolio theme that I set up on the WordPress platform. If you follow the link to the events section you will see 1 figure item in a gallery like position. I have this image set up to work as a fancybox gallery, but when you click on it, it opens up the fancybox interface but does not place a image in the frame, even though it should. So this is the problem...the images do not show up in fancybox and instead I see just the frame. Here is the html that I'm displaying: <figure> <a class="fancybox" data-fancybox-type="Fashion Show de Paris, France" href="http://www.nomadicdrift.com/test/kaniwa/wp-content/uploads/2012/07/NM2.jpg"> <img class="attachment-evento wp-post-image" width="231" height="191" title="NM" alt="NM" src="http://www.nomadicdrift.com/test/kaniwa/wp-content/uploads/2012/07/NM2-231x191.jpg"> </a> <figcaption> <a class="fancybox" data-fancybox-type="Fashion Show de Paris, France" href="http://www.nomadicdrift.com/test/kaniwa/wp-content/uploads/2012/07/CEDESAN.jpg"> </a> <h4>Fashion Show de Paris, France</h4> </figcaption> </figure> I'm not going to bore you with the PHP that I used to get that output because I think the problem lies elsewhere. ***I have tried to set up a simple standard fancybox gallery on the site also, but it gives me thes same problem, leading me to believe that the problem is deeper than the html markup. I have also successfully used this same markup for a one thumbnail fancybox gallery on another site. I thought maybe it was due to some conflict in the .js files I'm using. I tried uninstalling all of my plugins/addons (which aren't too many) one by one and still had the same result. I have all of my personal javascript in the functions.js file, which is where I call the fancybox plugin using the standard $("a.fancybox").fancybox();. I have installed this plugin before on other sites and have searched extensively for an answer, so any help is greatly appreciated. Thanks, Sean

  Read the article

• Several C# Language Questions

  - by Water Cooler v2

  1) What is int? Is it any different from the struct System.Int32? I understand that the former is a C# alias (typedef or #define equivalant) for the CLR type System.Int32. Is this understanding correct? 2) When we say: IComparable x = 10; Is that like saying: IComparable x = new System.Int32(); But we can't new a struct, right? or in C like syntax: struct System.In32 *x; x=>someThing = 10; 3) What is String with a capitalized S? I see in Reflector that it is the sealed String class, which, of course, is a reference type, unlike the System.Int32 above, which is a value type. What is string, with an uncapitalized s, though? Is that also the C# alias for this class? Why can I not see the alias definitions in Reflector? 4) Try to follow me down this subtle train of thought, if you please. We know that a storage location of a particular type can only access properties and members on its interface. That means: Person p = new Customer(); p.Name = "Water Cooler v2"; // legal because as Name is defined on Person. but // illegal without an explicit cast even though the backing // store is a Customer, the storage location is of type // Person, which doesn't support the member/method being // accessed/called. p.GetTotalValueOfOrdersMade(); Now, with that inference, consider this scenario: int i = 10; // obvious System.object defines no member to // store an integer value or any other value in. // So, my question really is, when the integer is // boxed, what is the *type* it is actually boxed to. // In other words, what is the type that forms the // backing store on the heap, for this operation? object x = i; Update Thank you for your answers, Eric Gunnerson and Aaronought. I'm afraid I haven't been able to articulate my questions well enough to attract very satisfying answers. The trouble is, I do know the answers to my questions on the surface, and I am, by no means, a newbie programmer. But I have to admit, a deeper understanding to the intricacies of how a language and its underlying platform/runtime handle storage of types has eluded me for as long as I've been a programmer, even though I write correct code.

  Read the article

• Writing OpenGL enabled GUI

  - by Jaen

  I am exploring a possibility to write a kind of a notebook analogue that would reproduce the look and feel of using a traditional notebook, but with the added benefit of customizing the page in ways you can't do on paper - ask the program to lay ruled paper here, grid paper there, paste an image, insert a recording from the built-in camera, try to do handwriting recognition on the tablet input, insert some latex for neat formulas and so on. I'm pretty interested in developing it just to see if writing notes on computer can come anywhere close to the comfort plain paper + pencil offer (hard to do IMO) and can always turn it in as a university C++ project, so double gain there. Coming from the type of project there are certain requirements for the user interface: the user will be able to zoom, move and rotate the notebook as he wishes and I think it's pretty sensible delegate it to OpenGL, so the prospective GUI needs to work well with OGL (preferably being rendered in it) the interface should be navigable with as little of keyboard input as user wishes (incorporating some sort of gestures maybe) up to limiting the keyboard keys as modifiers to the pen movements and taps; this includes tablet and possible multitouch support the interface should keep out of the way where not needed and come up where needed and be easily layerable the notebook sheet itself will be a container for objects representing the notebook blurbs, so it would be nice if the GUI would be able to overlay some frames over the exact parts of the OpenGL-drawn sheet to signify what can be done with given part (like moving, rotating, deleting, copying, editing etc.) and it's extents In terms of interface it's probably going to end up similar to Alias' Sketch Book Pro: [picture][http://1.bp.blogspot.com/_GGxlzvZW-CY/SeKYA_oBdSI/AAAAAAAAErE/J6A0kyXiuqA/s400/Autodesk_Alias_SketchBook_Pro_2.jpg] As far as toolkits go I'm considering Qt and nui, but I'm not really aware how well would they match up the requirements and how well would they handle such an application. As far as I know you can somehow coerce Qt into doing widget drawing with OpenGL, but on the other hand I heard voices it's slot-signal framework isn't exactly optimal and requires it's own preprocessor and I don't know how hard would be to do all the custom widgets I would need (say color-wheel, ruler, blurb frames, blurb selection, tablet-targeted pop-up menu etc.) in the constraints of Qt. Also quite a few Qt programs I've had on my machine seemed really sluggish, but it may be attributed to me having old PC or programmers using Qt suboptimally rather to the framework itself. As for [nui][http://www.libnui.net/] I know it's also cross-platform and all of the basic things you would require of a GUI toolkit and what is the biggest plus it is OpenGL-enabled from the start, but I don't know how it is with custom widgets and other facets and it certainly has smaller userbase and less elaborate documentation than Qt. The question goes as this: Does any of these toolkits fulfill (preferably all of) the requirements or there is a well fitting toolkit I haven't come across or maybe I should just roll up my sleeves, get SFML (or maybe Clutter would be more suited to this?) and something like FastDelegates or libsigc++ and program the GUI framework from the ground up myself? I would be very glad if anyone had experience with a similar GUI project and can offer some comments on how well these toolkits hold up or is it worthwhile to pursue own GUI toolkit in this case. Sorry for longwindedness, duh.

  Read the article

• c++ program debugged well with Cygwin4 (under Netbeans 7.2) but not with MinGW (under QT 4.8.1)

  - by GoldenAxe

  I have a c++ program which take a map text file and output it to a graph data structure I have made, I am using QT as I needed cross-platform program and GUI as well as visual representation of the map. I have several maps in different sizes (8x8 to 4096x4096). I am using unordered_map with a vector as key and vertex as value, I'm sending hash(1) and equal functions which I wrote to the unordered_map in creation. Under QT I am debugging my program with QT 4.8.1 for desktop MinGW (QT SDK), the program works and debug well until I try the largest map of 4096x4096, then the program stuck with the following error: "the inferior stopped because it received a signal from operating system", when debugging, the program halt at the hash function which used inside the unordered_map and not as part of the insertion state, but at a getter(2). Under Netbeans IDE 7.2 and Cygwin4 all works fine (debug and run). some code info: typedef std::vector<double> coordinate; typedef std::unordered_map<coordinate const*, Vertex<Element>*, container_hash, container_equal> vertexsContainer; vertexsContainer *m_vertexes (1) hash function: struct container_hash { size_t operator()(coordinate const *cord) const { size_t sum = 0; std::ostringstream ss; for ( auto it = cord->begin() ; it != cord->end() ; ++it ) { ss << *it; } sum = std::hash<std::string>()(ss.str()); return sum; } }; (2) the getter: template <class Element> Vertex<Element> *Graph<Element>::getVertex(const coordinate &cord) { try { Vertex<Element> *v = m_vertexes->at(&cord); return v; } catch (std::exception& e) { return NULL; } } I was thinking maybe it was some memory issue at the beginning, so before I was thinking of trying Netbeans I checked it with QT on my friend pc with a 16GB RAM and got the same error. Thanks.

  Read the article

• SSH X11 not working

  - by azat

  I have a home and work computer, the home computer has a static IP address. If I ssh from my work computer to my home computer, the ssh connection works but X11 applications are not displayed. In my /etc/ssh/sshd_config at home: X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost yes At work I have tried the following commands: xhost + home HOME_IP ssh -X home ssh -X HOME_IP ssh -Y home ssh -Y HOME_IP My /etc/ssh/ssh_config at work: Host * ForwardX11 yes ForwardX11Trusted yes My ~/.ssh/config at work: Host home HostName HOME_IP User azat PreferredAuthentications password ForwardX11 yes My ~/.Xauthority at work: -rw------- 1 azat azat 269 Jun 7 11:25 .Xauthority My ~/.Xauthority at home: -rw------- 1 azat azat 246 Jun 7 19:03 .Xauthority But it doesn't work After I make an ssh connection to home: $ echo $DISPLAY localhost:10.0 $ kate X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. kate: cannot connect to X server localhost:10.0 I use iptables at home, but I've allowed port 22. According to what I've read that's all I need. UPD. With -vvv ... debug2: callback start debug2: x11_get_proto: /usr/bin/xauth list :0 2/dev/null debug1: Requesting X11 forwarding with authentication spoofing. debug2: channel 1: request x11-req confirm 1 debug2: client_session2_setup: id 1 debug2: fd 3 setting TCP_NODELAY debug2: channel 1: request pty-req confirm 1 ... When try to launch kate: debug1: client_input_channel_open: ctype x11 rchan 2 win 65536 max 16384 debug1: client_request_x11: request from 127.0.0.1 55486 debug2: fd 8 setting O_NONBLOCK debug3: fd 8 is O_NONBLOCK debug1: channel 2: new [x11] debug1: confirm x11 debug2: X11 connection uses different authentication protocol. X11 connection rejected because of wrong authentication. debug2: X11 rejected 2 i0/o0 debug2: channel 2: read failed debug2: channel 2: close_read debug2: channel 2: input open - drain debug2: channel 2: ibuf empty debug2: channel 2: send eof debug2: channel 2: input drain - closed debug2: channel 2: write failed debug2: channel 2: close_write debug2: channel 2: output open - closed debug2: X11 closed 2 i3/o3 debug2: channel 2: send close debug2: channel 2: rcvd close debug2: channel 2: is dead debug2: channel 2: garbage collecting debug1: channel 2: free: x11, nchannels 3 debug3: channel 2: status: The following connections are open: #1 client-session (t4 r0 i0/0 o0/0 fd 5/6 cc -1) #2 x11 (t7 r2 i3/0 o3/0 fd 8/8 cc -1) # The same as above repeate about 7 times kate: cannot connect to X server localhost:10.0 UPD2 Please provide your Linux distribution & version number. Are you using a default GNOME or KDE environment for X or something else you customized yourself? azat:~$ kded4 -version Qt: 4.7.4 KDE Development Platform: 4.6.5 (4.6.5) KDE Daemon: $Id$ Are you invoking ssh directly on a command line from a terminal window? What terminal are you using? xterm, gnome-terminal, or? How did you start the terminal running in the X environment? From a menu? Hotkey? or ? From terminal emulator `yakuake` Manualy press `Ctrl + N` and write commands Can you run xeyes from the same terminal window where the ssh -X fails? `xeyes` - is not installed But `kate` or another kde app is running Are you invoking the ssh command as the same user that you're logged into the X session as? From the same user UPD3 I also download ssh sources, and using debug2() write why it's report that version is different It see some cookies, and one of them is empty, another is MIT-MAGIC-COOKIE-1

  Read the article

• How can I build pyv8 from source on FreeBSD against the v8 port?

  - by Utkonos

  I am unable to build pyv8 from source on FreeBSD. I have installed the /usr/ports/lang/v8 port, and I'm running into the following error. It seems that pyv8 wants to build v8 itself even though v8 is already built and installed. How can I point pyv8 to the already installed location of v8? # python setup.py build Found Google v8 base on V8_HOME , update it to the latest SVN trunk at running build ==================== INFO: Installing or updating GYP... -------------------- INFO: Check out GYP from SVN ... DEBUG: make dependencies ERROR: Check out GYP from SVN failed: code=2 DEBUG: "Makefile", line 43: Missing dependency operator "Makefile", line 45: Need an operator "Makefile", line 46: Need an operator "Makefile", line 48: Need an operator "Makefile", line 50: Need an operator "Makefile", line 52: Need an operator "Makefile", line 54: Missing dependency operator "Makefile", line 56: Need an operator "Makefile", line 58: Missing dependency operator "Makefile", line 60: Need an operator "Makefile", line 62: Missing dependency operator "Makefile", line 64: Need an operator "Makefile", line 66: Missing dependency operator "Makefile", line 68: Need an operator "Makefile", line 70: Missing dependency operator "Makefile", line 72: Need an operator "Makefile", line 73: Missing dependency operator "Makefile", line 75: Need an operator "Makefile", line 77: Missing dependency operator "Makefile", line 79: Need an operator "Makefile", line 81: Missing dependency operator "Makefile", line 83: Need an operator "Makefile", line 85: Missing dependency operator "Makefile", line 87: Need an operator "Makefile", line 89: Need an operator "Makefile", line 91: Missing dependency operator "Makefile", line 93: Need an operator "Makefile", line 95: Need an operator "Makefile", line 97: Need an operator "Makefile", line 99: Missing dependency operator "Makefile", line 101: Need an operator "Makefile", line 103: Missing dependency operator "Makefile", line 105: Need an operator "Makefile", line 107: Missing dependency operator "Makefile", line 109: Need an operator "Makefile", line 111: Missing dependency operator "Makefile", line 113: Need an operator "Makefile", line 115: Missing dependency operator "Makefile", line 117: Need an operator Error expanding embedded variable. ==================== INFO: Patching the GYP scripts INFO: patch the Google v8 build/standalone.gypi file to enable RTTI and C++ Exceptions ==================== INFO: building Google v8 with GYP for x64 platform with release mode -------------------- INFO: build v8 from SVN ... DEBUG: make verifyheap=off component=shared_library visibility=on gdbjit=off liveobjectlist=off regexp=native disassembler=off objectprint=off debuggersupport=on extrachecks=off snapshot=on werror=on x64.release ERROR: build v8 from SVN failed: code=2 DEBUG: "Makefile", line 43: Missing dependency operator "Makefile", line 45: Need an operator "Makefile", line 46: Need an operator "Makefile", line 48: Need an operator "Makefile", line 50: Need an operator "Makefile", line 52: Need an operator "Makefile", line 54: Missing dependency operator "Makefile", line 56: Need an operator "Makefile", line 58: Missing dependency operator "Makefile", line 60: Need an operator "Makefile", line 62: Missing dependency operator "Makefile", line 64: Need an operator "Makefile", line 66: Missing dependency operator "Makefile", line 68: Need an operator "Makefile", line 70: Missing dependency operator "Makefile", line 72: Need an operator "Makefile", line 73: Missing dependency operator "Makefile", line 75: Need an operator "Makefile", line 77: Missing dependency operator "Makefile", line 79: Need an operator "Makefile", line 81: Missing dependency operator "Makefile", line 83: Need an operator "Makefile", line 85: Missing dependency operator "Makefile", line 87: Need an operator "Makefile", line 89: Need an operator "Makefile", line 91: Missing dependency operator "Makefile", line 93: Need an operator "Makefile", line 95: Need an operator "Makefile", line 97: Need an operator "Makefile", line 99: Missing dependency operator "Makefile", line 101: Need an operator "Makefile", line 103: Missing dependency operator "Makefile", line 105: Need an operator "Makefile", line 107: Missing dependency operator "Makefile", line 109: Need an operator "Makefile", line 111: Missing dependency operator "Makefile", line 113: Need an operator "Makefile", line 115: Missing dependency operator "Makefile", line 117: Need an operator Error expanding embedded variable. The files that are installed by the v8 port are the following (in /usr/local): bin/d8 include/v8.h include/v8-debug.h include/v8-preparser.h include/v8-profiler.h include/v8-testing.h include/v8stdint.h lib/libv8.so lib/libv8.so.1

  Read the article

• Error installing pkgconfig via macports

  - by Greg K

  I installed Macports 1.8.2 from a DMG. That seemed to install fine. I ran sudo port selfupdate to make sure my ports tree was current. I then tried to install bindfs as I want to mount some directories in my OS X file system (like you can do with mount --bind in linux). pkgconfig and macfuse are two dependencies of bindfs. I had trouble installing bindfs due to errors installing pkgconfig, so I tried to just install pkgconfig, here's the debug output from sudo port install pkgconfig: $ sudo port -d install pkgconfig DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. ---> Computing dependencies for pkgconfig DEBUG: Executing org.macports.main (pkgconfig) DEBUG: Skipping completed org.macports.fetch (pkgconfig) DEBUG: Skipping completed org.macports.checksum (pkgconfig) DEBUG: Skipping completed org.macports.extract (pkgconfig) DEBUG: Skipping completed org.macports.patch (pkgconfig) ---> Configuring pkgconfig DEBUG: Using compiler 'Mac OS X gcc 4.2' DEBUG: Executing org.macports.configure (pkgconfig) DEBUG: Environment: CFLAGS='-O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC='/usr/bin/gcc-4.2' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig' checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... no checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... i386-apple-darwin10.3.0 checking host system type... i386-apple-darwin10.3.0 checking for style of include used by make... none checking for gcc... /usr/bin/gcc-4.2 checking for C compiler default output file name... configure: error: C compiler cannot create executables See `config.log' for more details. Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig " returned error 77 DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig " returned error 77 while executing "$procedure $targetname" Warning: the following items did not execute (for pkgconfig): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. I have only recently installed Xcode 3.2.2 (prior to installing macports). Am I right in thinking this the issue here: configure: error: C compiler cannot create executables

  Read the article

• Does likewise-open > version 5.4 contain CIFS support?

  - by Ben Andken

  I'm trying to get the CIFS server working in likewise-open. I've found this set of instructions and everything seems to work until I try to connect ([url]http://www.likewise.com/resources/documentation_library/manuals/cifs/likewise-cifs-smb-file-server-guide.html#id2765992):[/url] 1.6. Build and Configure a Standalone Likewise-CIFS Server This section demonstrates how to build and configure a standalone instance of Likewise-CIFS from the command line. The following procedure assumes that you want to set up Likewise-CIFS on a Linux server to share files with Windows computers in a network without Active Directory. This procedure also assumes you know how to build Linux applications from their source code and then install them. Download Likewise-CIFS from its open source git location: $ git clone git://git.likewiseopen.org/ Download, build, and install the following tools. The tools listed are known to work, but earlier or later versions might work as well. Also, instead of downloading the tools, you might be able to install them on your platform with apt-get or some other means. http://ftp.gnu.org/gnu/autoconf/autoconf-2.65.tar.gz http://ftp.gnu.org/gnu/automake/automake-1.9.6.tar.gz http://ftp.gnu.org/gnu/libtool/libtool-2.2.6a.tar.gz http://pkgconfig.freedesktop.org/releases/pkg-config-0.23.tar.gz gcc --version 3.x or greater Build Likewise-CIFS: $ cd likewise-open $ build/mkcomp --debug all Install Likewise-CIFS: $ sudo su $ cd staging/install-root $ tar cf - . | (cd / && tar xvf -) Make sure Samba is not running: $ /etc/init.d/smb stop Make sure SELinux is either disabled or set to permissive. Make sure the ports required by Likewise are open. For a list of ports that Likewise uses, see the Likewise Open Installation and Administration Guide. Configure Likewise Open: $ /etc/init.d/lwsmd start $ for i in /etc/likewise/*.reg; do /opt/likewise/bin/lwregshell upgrade $i; done $ /etc/init.d/lwsmd stop $ /etc/init.d/lwsmd start $ /opt/likewise/bin/lwsm start srvsvc $ /opt/likewise/bin/domainjoin-cli configure --enable nsswitch Add a user account to the local Likewise provider database. In the following example, substitute the account name that you want for newuser. $ /opt/likewise/bin/lw-add-user --home /home/newuser --shell /bin/bash newuser Successfully added user newuser Enable the user and set the password: $ /opt/likewise/bin/lw-mod-user --enable-user --set-password newuser New Password: ********** Successfully modified user newuser Look up new user's identity as follows. Substitute the value from the command hostname -s for the hostname. Keep in mind that Likewise truncates a hostname longer than 15 characters to the first 15 characters of the string. % id hostname\\newuser uid=2000(HOSTNAME\newuser) gid=1800(HOSTNAME\Likewise Users) groups=1800(HOSTNAME\Likewise Users) context=system_u:system_r:unconfined_t:s0 Make a CIFS directory for the user: mkdir /lwcifs/newuser chown 2000:1800 /lwcifs/newuser From a Windows computer, map the Likewise-CIFS drive share: Computer->Map Network Drive... Folder: \\IP_hostname\c$ Click "Finish" Username: hostname\newuser Password: user_password The last step fails when I try to connect. I've tried with Windows XP Pro and Windows 7 Pro. The rest of the directions only appear to work for version 5.4 (the one that shipped with 10.04). For 12.04, version 6.1 is the only one available and it doesn't appear to have the srvsvc module mentioned in these instructions. Is CIFS support dropped in the 6.1 version of likewise-open?

  Read the article

• Managing access to multiple linux system

  - by Swartz

  A searched for answers but have found nothing on here... Long story short: a non-profit organization is in dire need of modernizing its infrastructure. First thing is to find an alternatives to managing user accounts on a number of Linux hosts. We have 12 servers (both physical and virtual) and about 50 workstations. We have 500 potential users for these systems. The individual who built and maintained the systems over the years has retired. He wrote his own scripts to manage it all. It still works. No complaints there. However, a lot of the stuff is very manual and error-prone. Code is messy and after updates often needs to be tweaked. Worst part is there is little to no docs written. There are just a few ReadMe's and random notes which may or may not be relevant anymore. So maintenance has become a difficult task. Currently accounts are managed via /etc/passwd on each system. Updates are distributed via cron scripts to correct systems as accounts are added on the "main" server. Some users have to have access to all systems (like a sysadmin account), others need access to shared servers, while others may need access to workstations or only a subset of those. Is there a tool that can help us manage accounts that meets the following requirements? Preferably open source (i.e. free as budget is VERY limited) mainstream (i.e. maintained) preferably has LDAP integration or could be made to interface with LDAP or AD service for user authentication (will be needed in the near future to integrate accounts with other offices) user management (adding, expiring, removing, lockout, etc) allows to manage what systems (or group of systems) each user has access to - not all users are allowed on all systems support for user accounts that could have different homedirs and mounts available depending on what system they are logged into. For example sysadmin logged into "main" server has main://home/sysadmin/ as homedir and has all shared mounts sysadmin logged into staff workstations would have nas://user/s/sysadmin as homedir(different from above) and potentially limited set of mounts, a logged in client would have his/her homedir at different location and no shared mounts. If there is an easy management interface that would be awesome. And if this tool is cross-platform (Linux / MacOS / *nix), that will be a miracle! I have searched the web and so have found nothing suitable. We are open to any suggestions. Thank you. EDIT: This question has been incorrectly marked as a duplicate. The linked to answer only talks about having same homedirs on all systems, whereas we need to have different homedirs based on what system user is currently logged into(MULTIPLE homedirs). Also access needs to be granted only to some machinees not the whole lot. Mods, please understand the full extent of the problem instead of merely marking it as duplicate for points...

  Read the article

• Network authentication + roaming home directory - which technology should I look into using?

  - by Brian

  I'm looking into software which provides a user with a single identity across multiple computers. That is, a user should have the same permissions on each computer, and the user should have access to all of his or her files (roaming home directory) on each computer. There seem to be many solutions for this general idea, but I'm trying to determine the best one for me. Here are some details along with requirements: The network of machines are Amazon EC2 instances running Ubuntu. We access the machines with SSH. Some machines on this LAN may have different uses, but I am only discussing machines for a certain use (running a multi-tenancy platform). The system will not necessarily have a constant amount of machines. We may have to permanently or temporarily alter the amount of machines running. This is the the reason why I'm looking into centralized authentication/storage. The implementation of this effect should be a secure one. We're unsure if users will have direct shell access, but their software will potentially be running (under restricted Linux user names, of course) on our systems, which is as good as direct shell access. Let's assume that their software could potentially be malicious for the sake of security. I have heard of several technologies/combinations to achieve my goal, but I'm unsure of the ramifications of each. An older ServerFault post recommended NFS & NIS, though the combination has security problems according to this old article by Symantec. The article suggests moving to NIS+, but, as it is old, this Wikipedia article has cited statements suggesting a trending away from NIS+ by Sun. The recommended replacement is another thing I have heard of... LDAP. It looks like LDAP can be used to save user information in a centralized location on a network. NFS would still need to be used to cover the 'roaming home folder' requirement, but I see references of them being used together. Since the Symantec article pointed out security problems in both NIS and NFS, is there software to replace NFS, or should I heed that article's suggestions for locking it down? I'm tending toward LDAP because another fundamental piece of our architecture, RabbitMQ, has a authentication/authorization plugin for LDAP. RabbitMQ will be accessible in a restricted manner to users on the system, so I would like to tie the security systems together if possible. Kerberos is another secure authentication protocol that I have heard of. I learned a bit about it some years ago in a cryptography class but don't remember much about it. I have seen suggestions online that it can be combined with LDAP in several ways. Is this necessary? What are the security risks of LDAP without Kerberos? I also remember Kerberos being used in another piece of software developed by Carnegie Mellon University... Andrew File System, or AFS. OpenAFS is available for use, though its setup seems a bit complicated. At my university, AFS provides both requirements... I can log in to any machine, and my "AFS folder" is always available (at least when I acquire an AFS token). Along with suggestions for which path I should look into, does anybody have any guides which were particularly helpful? As the bold text pointed out, LDAP looks to be the best choice, but I'm particularly interested in the implementation details (Keberos? NFS?) with respect to security.

  Read the article

• set proxy in apache for XMPP chat

  - by Hunt

  I want to setup a proxy settings in Apache to use Facebook XMPP Chat So far I have setup ejabber server and I am able to access xmpp service using http://mydomain.com:5280/xmpp-http-bind I am able to create Jabber Account too. Now as I want to integrate Facebook XMPP chat , I want my server to sit in between client and chat.facebook.com because I want to implement Facebook chat and custom chat too. So I have read this article and come to know that I need to serve BOSH Service as a proxy in apache to access Facebook Chat service. So I don't know how to set up a proxy in a apache httpd.conf as I have tried following <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind ProxyPassReverse /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind But whenever I request http://www.mydomain.com:5280/xmpp-http-bind from strophe.js I am getting following response from server <body type='terminate' condition='internal-server-error' xmlns='http://jabber.org/protocol/httpbind'> BOSH module not started </body> and server log says following E(<0.567.0:ejabberd_http_bind:1239) : You are trying to use BOSH (HTTP Bind) in host "chat.facebook.com", but the module mod_http_bind is not started in that host. Configure your BOSH client to connect to the correct host, or add your desired host to the configuration, or check your 'modules' section in your ejabberd configuration file. here is my existing settings of ejabberd.cfg , but still no luck {5280, ejabberd_http, [ {access,all}, {request_handlers, [ {["pub", "archive"], mod_http_fileserver}, {["xmpp-http-bind"], mod_http_bind} ]}, captcha, http_bind, http_poll, register, web_admin ]} ]}. in a module section {mod_http_bind, [{max_inactivity, 120}]}, and whenever i fire http://www.mydomain.com:5280/xmpp-http-bind url independently am getting following message ejabberd mod_http_bind An implementation of XMPP over BOSH (XEP-0206) This web page is only informative. To use HTTP-Bind you need a Jabber/XMPP client that supports it. I have added chat.facebook.com in a list of host in ejabber.cfg as follows {hosts, ["localhost","mydomain.com","chat.facebook.com"]} and now i am getting following response <body xmlns='http://jabber.org/protocol/httpbind' sid='710da2568460512eeb546545a65980c2704d9a27' wait='300' requests='2' inactivity='120' maxpause='120' polling='2' ver='1.8' from='chat.facebook.com' secure='true' authid='1917430584' xmlns:xmpp='urn:xmpp:xbosh' xmlns:stream='http://etherx.jabber.org/streams' xmpp:version='1.0'> <stream:features xmlns:stream='http://etherx.jabber.org/streams'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>DIGEST-MD5</mechanism> <mechanism>PLAIN</mechanism> </mechanisms> <c xmlns='http://jabber.org/protocol/caps' hash='sha-1' node='http://www.process-one.net/en/ejabberd/' ver='yy7di5kE0syuCXOQTXNBTclpNTo='/> <register xmlns='http://jabber.org/features/iq-register'/> </stream:features> </body> if i use valid BOSH service created my jack moffit http://bosh.metajack.im:5280/xmpp-httpbind then i am getting following valid XML from facebook , but from my server i am not getting this <body xmlns='http://jabber.org/protocol/httpbind' inactivity='60' secure='true' authid='B8732AA1' content='text/xml; charset=utf-8' window='3' polling='15' sid='928073b02da55d34eb3c3464b4a40a37' requests='2' wait='300'> <stream:features xmlns:stream='http://etherx.jabber.org/streams' xmlns='jabber:client'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>X-FACEBOOK-PLATFORM</mechanism> <mechanism>DIGEST-MD5</mechanism> </mechanisms> </stream:features> </body> Can anyone please help me to resolve the issue

  Read the article

• Minecraft server Rkit ubuntu upstart [closed]

  - by user1637491

  I have an Intel server running Ubuntu Server 12.04.1 I am working on moving my CraftBukkit Minecraft Server to the new platform. I read the upstart ubuntu cookbook and wrote a .conf file I have a minecraft user (named minecraft) and its home Directory is /home/minecraft it contains prwxrwxrwx 1 minecraft minecraft 0 Sep 19 14:49 command-fifo drwx------ 8 minecraft minecraft 4096 Sep 19 14:50 HDsaves drwx------ 2 minecraft minecraft 4096 Aug 31 15:13 logrolls -rw-r--r-- 1 root root 5 Sep 19 14:49 minecraft.pid drwxrwxrwx 8 minecraft minecraft 180 Sep 19 14:49 ramdisk -rw------- 1 minecraft minecraft 119 Sep 19 10:34 save.sh drwxrwxrwx 9 minecraft minecraft 4096 Sep 19 14:50 server -rw-rw-r-- 1 minecraft minecraft 44 Aug 31 11:40 shutdown.sh the server directory contains drwxrwxrwx 6 minecraft minecraft 4096 Aug 30 13:32 Backups -rwxrwxrwx 1 minecraft minecraft 0 Sep 18 12:26 banned-ips.txt -rwxrwxrwx 1 minecraft minecraft 17 Sep 18 12:26 banned-players.txt drwxrwxrwx 4 minecraft minecraft 4096 Aug 30 12:26 buildcraft -rwxrwxrwx 1 minecraft minecraft 1447 Sep 18 12:26 bukkit.yml -rwxrwxrwx 1 minecraft minecraft 0 Aug 30 11:05 command-fifo drwxrwxrwx 2 minecraft minecraft 4096 Aug 30 12:26 config lrwxrwxrwx 1 minecraft minecraft 23 Sep 19 14:49 craftbukkit.jar -> ramdisk/craftbukkit.jar -rwxrwxrwx 1 minecraft minecraft 17419 Sep 18 12:26 ForgeModLoader-0.log -rwxrwxrwx 1 minecraft minecraft 17420 Sep 18 12:24 ForgeModLoader-1.log -rwxrwxrwx 1 minecraft minecraft 17420 Sep 18 11:53 ForgeModLoader-2.log -rwxrwxrwx 1 minecraft minecraft 2576 Aug 30 11:05 help.yml drwxrwxrwx 2 minecraft minecraft 4096 Aug 30 12:31 lib drwxrwxrwx 3 minecraft minecraft 4096 Sep 19 14:49 logrolls -rwxrwxrwx 1 minecraft minecraft 200035 Sep 4 17:58 Minecraft_RKit.jar lrwxrwxrwx 1 minecraft minecraft 12 Sep 19 14:49 mods -> ramdisk/mods -rwxrwxrwx 1 minecraft minecraft 5 Sep 18 12:26 ops.txt -rwxrwxrwx 1 minecraft minecraft 0 Aug 30 11:05 permissions.yml lrwxrwxrwx 1 minecraft minecraft 15 Sep 19 14:49 plugins -> ramdisk/plugins lrwxrwxrwx 1 minecraft minecraft 16 Sep 19 14:49 redpower -> ramdisk/redpower -rw-r--r-- 1 root root 255 Sep 19 15:10 server.log -rwxrwxrwx 1 minecraft minecraft 464 Sep 8 11:09 server.properties drwxrwxrwx 3 minecraft minecraft 4096 Sep 5 16:05 SpaceModule drwxrwxrwx 3 minecraft minecraft 4096 Aug 30 13:07 toolkit -rwxrwxrwx 1 minecraft minecraft 1433 Sep 14 21:04 wepif.yml -rwxrwxrwx 1 minecraft minecraft 0 Sep 18 12:26 white-list.txt lrwxrwxrwx 1 minecraft minecraft 13 Sep 19 14:49 world -> ramdisk/world lrwxrwxrwx 1 minecraft minecraft 20 Sep 19 14:49 world_nether -> ramdisk/world_nether lrwxrwxrwx 1 minecraft minecraft 21 Sep 19 14:49 world_the_end -> ramdisk/world_the_end the startup .conf file: # Starts the minecraft server after loading JRE from ramdisk # # for now im still working on it description "minecraft-server" start on filesystem or runlevel [2345] stop on runlevel [!2345] oom score -999 kill timeout 60 pre-start script sh /usr/lib/jvm/java.sh end script script cd /home/minecraft echo "$(date) Starting minecraft" sudo cp -r /home/minecraft/HDsaves/* ramdisk sudo chown -R minecraft:minecraft ramdisk sudo chmod -R 777 ramdisk sudo ln -sf ramdisk/* server sudo chown -R minecraft:minecraft server sudo chmod -R 777 server sudo mv server/server.log server/logrolls/ zip server/logrolls/temp.zip server/logrolls/server.log sudo mv server/logrolls/temp.zip server/logrolls/"$(date)".log.zip sudo rm server/logrolls/server.log sudo rm -f command-fifo sudo mkfifo command-fifo sudo chown minecraft:minecraft command-fifo sudo chmod 777 command-fifo echo "$(date) Root commands finished" echo "$(date) Starting Wrapper" cd server sudo -u minecraft java -Xmx30M -Xms30M -XX:MaxPermSize=40M -Djava.awt.headless=true -jar Minecraft_RKit.jar timv:*spoilers* <> /home/minecraft/command-fifo & sudo echo $! >| /home/minecraft/minecraft.pid echo "$(date) Minecraft Started" end script pre-stop script cd /home/minecraft PID=`cat minecraft.pid` if [ "$PID" != "" ]; then echo "Stopping MineCraft Server PID=$PID" sudo echo save-all >> command-fifo sudo echo .stopwrapper >> command-fifo wait $PID sudo rm minecraft.pid sudo rsync -rt --delete ramdisk/* HDsaves/ echo "$(date) ramdisk save complete" echo "MineCraft save-shutdown complete." else echo "MineCraft not running" fi end script so when I start it up the upstart gererated log says: Wed Sep 19 14:49:30 CDT 2012 Starting minecraft adding: server/logrolls/server.log (stored 0%) Wed Sep 19 14:49:56 CDT 2012 Root commands finished Wed Sep 19 14:49:56 CDT 2012 Starting Wrapper Wed Sep 19 14:49:56 CDT 2012 Minecraft Started

  Read the article

• outgoing DNS flood targeted to non-ISP hosts

  - by radudani

  Below is the specific traffic monitored at the network perimeter and originating from a user PC on Vista platform; my question is not about the effects of the flood, but about the nature of the source of it; is this a kind of known infection, or just an application went out of control? a standard NOD32 scan didn't find anything, as the user told me; Thank you for any hint, Danny 14:40:10.115876 IP 192.168.7.42.4122 67.228.0.181.53: S 2742536765:2742536765(0) win 16384 14:40:10.115943 IP 192.168.7.42.4124 67.228.181.207.53: S 3071079888:3071079888(0) win 16384 14:40:10.116015 IP 192.168.7.42.4126 67.228.0.181.53: S 3445199428:3445199428(0) win 16384 14:40:10.116086 IP 192.168.7.42.4128 67.228.181.207.53: S 2053198691:2053198691(0) win 16384 14:40:10.116154 IP 192.168.7.42.4130 67.228.0.181.53: S 2841660872:2841660872(0) win 16384 14:40:10.116222 IP 192.168.7.42.4132 67.228.181.207.53: S 3150822465:3150822465(0) win 16384 14:40:10.116290 IP 192.168.7.42.4134 67.228.0.181.53: S 1692515021:1692515021(0) win 16384 14:40:10.116358 IP 192.168.7.42.4136 67.228.181.207.53: S 3358275919:3358275919(0) win 16384 14:40:10.116430 IP 192.168.7.42.4138 67.228.0.181.53: S 930184999:930184999(0) win 16384 14:40:10.116498 IP 192.168.7.42.4140 67.228.181.207.53: S 1504984630:1504984630(0) win 16384 14:40:10.116566 IP 192.168.7.42.4142 67.228.0.181.53: S 546074424:546074424(0) win 16384 14:40:10.116634 IP 192.168.7.42.4144 67.228.181.207.53: S 4241828590:4241828590(0) win 16384 14:40:10.116702 IP 192.168.7.42.4146 67.228.0.181.53: S 668634627:668634627(0) win 16384 14:40:10.116769 IP 192.168.7.42.4148 67.228.181.207.53: S 3768119461:3768119461(0) win 16384 14:40:10.117360 IP 192.168.7.42.4111 67.228.0.181.53: 12676 op8 Resp12*- [2128q][|domain] 14:40:10.117932 IP 192.168.7.42.4112 67.228.181.207.53: 44190 op7 NotAuth*|$ [29103q],[|domain] 14:40:10.118726 IP 192.168.7.42.4113 67.228.0.181.53: 49196 inv_q [b2&3=0xeea] [64081q] [28317a] [43054n] [23433au] Type63482 (Class 5889)? M-_^OSM-JM-m^_M-i.[|domain] 14:40:10.119934 IP 192.168.7.42.4114 67.228.181.207.53: 48131 updateMA Resp12$ [43850q],[|domain] 14:40:10.121164 IP 192.168.7.42.4115 67.228.0.181.53: 46330 updateM% [b2&3=0x665b] [23691a] [998q] [32406n] [11452au][|domain] 14:40:10.121866 IP 192.168.7.42.4116 67.228.181.207.53: 34425 op7 YXRRSet* [39927q][|domain] 14:40:10.123107 IP 192.168.7.42.4117 67.228.0.181.53: 56536 notify+ [b2&3=0x27e6] [59761a] [23005q] [33341n] [29705au][|domain] 14:40:10.123961 IP 192.168.7.42.4118 67.228.181.207.53: 19323 stat% [b2&3=0x14bb] [32491a] [41925q] [2038n] [5857au][|domain] 14:40:10.132499 IP 192.168.7.42.4119 67.228.0.181.53: 50432 updateMA+ [b2&3=0x6bc2] [10733a] [9775q] [46984n] [15261au][|domain] 14:40:10.133394 IP 192.168.7.42.4120 67.228.181.207.53: 2171 notify Refused$ [26027q][|domain] 14:40:10.134421 IP 192.168.7.42.4121 67.228.0.181.53: 25802 updateM NXDomain*-$ [28641q][|domain] 14:40:10.135392 IP 192.168.7.42.4122 67.228.181.207.53: 2073 updateMA+ [b2&3=0x6d0b] [43177a] [54332q] [17736n] [43636au][|domain] 14:40:10.136638 IP 192.168.7.42.4123 67.228.0.181.53: 15346 updateD+% [b2&3=0x577a] [61686a] [19106q] [15824n] [37833au] Type28590 (Class 64856)? [|domain] 14:40:10.137265 IP 192.168.7.42.4124 67.228.181.207.53: 60761 update+ [b2&3=0x2b66] [43293a] [53922q] [23115n] [11349au][|domain] 14:40:10.148122 IP 192.168.7.42.4125 67.228.0.181.53: 3418 op3% [b2&3=0x1a92] [51107a] [60368q] [47777n] [56081au][|domain]

  Read the article

• FreeBSD with Vagrant - don't know how to check guest additions version

  - by joelmaranhao

  On Mac OS X 10.9.3 Picked a box from the VagrantCloud Init the vagrant box $ vagrant init chef/freebsd-9.2-i386 A `Vagrantfile` has been placed in this directory. You are now ready to `vagrant up` your first virtual environment! Please read the comments in the Vagrantfile as well as documentation on `vagrantup.com` for more information on using Vagrant. List the files $ ls -al -rw-r--r-- 1 joel staff 4831 Jun 5 17:17 Vagrantfile Vagrantfile content VAGRANTFILE_API_VERSION = "2" Vagrant.configure(VAGRANTFILE_API_VERSION) do |config| config.vm.box = "chef/freebsd-9.2-i386" end Starting my virtual box leads to Errors $ vagrant up Bringing machine 'default' up with 'virtualbox' provider... ==> default: Box 'chef/freebsd-9.2-i386' could not be found. Attempting to find and install... default: Box Provider: virtualbox default: Box Version: >= 0 ==> default: Loading metadata for box 'chef/freebsd-9.2-i386' default: URL: https://vagrantcloud.com/chef/freebsd-9.2-i386 ==> default: Adding box 'chef/freebsd-9.2-i386' (v1.0.0) for provider: virtualbox default: Downloading: https://vagrantcloud.com/chef/freebsd-9.2-i386/version/1/provider/virtualbox.box ==> default: Successfully added box 'chef/freebsd-9.2-i386' (v1.0.0) for 'virtualbox'! ==> default: Importing base box 'chef/freebsd-9.2-i386'... ==> default: Matching MAC address for NAT networking... ==> default: Checking if box 'chef/freebsd-9.2-i386' is up to date... ==> default: Setting the name of the VM: freebsd92-i386_default_1401982167145_49633 ==> default: Fixed port collision for 22 => 2222. Now on port 2201. ==> default: Clearing any previously set network interfaces... ==> default: Preparing network interfaces based on configuration... default: Adapter 1: nat ==> default: Forwarding ports... default: 22 => 2201 (adapter 1) ==> default: Booting VM... ==> default: Waiting for machine to boot. This may take a few minutes... default: SSH address: 127.0.0.1:2201 default: SSH username: vagrant default: SSH auth method: private key default: Warning: Connection timeout. Retrying... default: Warning: Connection timeout. Retrying... ==> default: Machine booted and ready! Sorry, don't know how to check guest version of Virtualbox Guest Additions on this platform. Stopping installation. ==> default: Checking for guest additions in VM... default: The guest additions on this VM do not match the installed version of default: VirtualBox! In most cases this is fine, but in rare cases it can default: prevent things such as shared folders from working properly. If you see default: shared folder errors, please make sure the guest additions within the default: virtual machine match the version of VirtualBox you have installed on default: your host and reload your VM. default: default: Guest Additions Version: 4.2.16 default: VirtualBox Version: 4.3 ==> default: Mounting shared folders... default: /vagrant => /Users/joel/Code/anybots/operations/robot/freebsd92-i386 Vagrant attempted to execute the capability 'mount_virtualbox_shared_folder' on the detect guest OS 'freebsd', but the guest doesn't support that capability. This capability is required for your configuration of Vagrant. Please either reconfigure Vagrant to avoid this capability or fix the issue by creating the capability. Note that I have recently installed the latest version of VirtualBox, but somehow I can't find the Guest Additions.

  Read the article

• LDAP object class violation: attribute ou not allowed in suffix?

  - by Paramaeleon

  I am about to set up a LDAP directory. It is used as a tool to communicate user permissions from a web application to WebDav file system access, e.g. adding a user to the web platform shall allow login to the file system with the same credentials. There are no other usages intended. Following this German tutorial which encourages the use of the attributes c, o, ou etc. over dc, I configured the following suffix and root: suffix "ou=webtool,o=myOrg,c=de" rootdn "cn=ldapadmin,ou=webtool,o=myOrg,c=de" Server starts and I can connect to it by LDAP Admin, which reports “LDAP error: Object lacks”. Well, there aren’t any objects yet. I now want to create the root and admin elements from shell. I created an init.ldif file: dn: ou=webtool,o=myOrg,c=de objectclass: dcObject objectclass: organization dc: webtool o: webtool dn: cn=ldapadmin,ou=webtool,o=myOrg,c=de objectclass: organizationalRole cn: ldapadmin Trying to load the file runs into an error, telling me that ou is not allowed: server:~ # ldapadd -x -D "cn=ldapadmin,ou=webtool,o=myOrg,c=de" -W -f init.ldif Enter LDAP Password: adding new entry "ou=webtool,o=myOrg,c=de" ldap_add: Object class violation (65) additional info: attribute 'ou' not allowed I am not using ou anywhere except in the suffix, so the question: Isn’t it allowed here? What is allowed here? Here is my answer. I am not allowed to post it as answer for 8 hours, so don’t mind that it is part of the question by now. I will move it outside some day, if I don’t forget to do so. There are numberous dependencies for the creation of elements, and error messages are rather confusing if you don’t know of the concept. The objectclass isn’t necessarily dcObject for the databases’ root node, as it is likely to guess when you read several tutoriales. Instead, it must correspond to the object’s type: Here, for a name starting with ou=, it must be organizationalUnit. I found this piece of information in these tables [Link removed due to restriction: Oops! Your edit couldn't be submitted because: We're sorry, but as a spam prevention mechanism, new users can only post a maximum of two hyperlinks. Earn more than 10 reputation to post more hyperlinks. Link is below]. Further on, the object class dictates which properties must and can be added in the record. Here, organizationalUnit must have an ou: entry and must not have neither dc: nor o: entry. The healthy init.ldif file looks like that: dn: ou=webtool,o=myOrg,c=de objectclass: organizationalUnit ou: LDAP server for my webtool dn: cn=ldapadmin,ou=webtool,o=myOrg,c=de objectclass: organizationalRole cn: ldapadmin Note: The page also states: “While many objectClasses show no MUST attributes you must (ouch) follow any hierarchy […] to determine if this is the really case.” I thought that would mean my root record would have to provide the must fields for c= and o= (c: and o:, respectively) but this isn’t the case. Link in answer is (1): http :// www (dot) zytrax (dot) com/books/ldap/ape/ "Appendix E: LDAP - Object Classes and Attributes"

  Read the article

• SQL2008R2 install issues on windows 7 - unable to install setup support files?

  - by Liam

  I am trying to install the above but am getting the following errors when its attempting to install the setup support files, This is the first error that occurs during installation of the setup support files TITLE: Microsoft SQL Server 2008 R2 Setup ------------------------------ The following error has occurred: The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401 This is the second error that occurs after clicking continue in the installer after the first error is generated TITLE: Microsoft SQL Server 2008 R2 Setup ------------------------------ The following error has occurred: SQL Server Setup has encountered an error when running a Windows Installer file. Windows Installer error message: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer file: C:\Users\watto_uk\Desktop\In-Digital\Software\Microsoft\SQL Server 2008 R2\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110713_205508\SqlSupport_Cpu64_1_ComponentUpdate.log Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDC80C325 These errors are generated from an ISO package downloaded from Microsoft. I have also tried using the web platform installer to install the express version instead but the SQL Server Installation fails with that also. The management studio installs fine but not the server. I have checked to make sure that the Windows Installer is started and it is. Cant seem to find an answer for this anywhere as all previous reported issues appear to be related to XP. I did have the express edition installed on the machine previously but uninstalled it to upgrade to the full version, I wish I hadn't now. Can anyone kindly offer any advice or point me in the right direction to stop me going insane with this? Any advice will be appreciated. Update======================= After digging a bit deeper ive located details of the error from the setup log file, i can also upload the log file if required. MSI (s) (E8:28) [23:35:18:705]: Assembly Error:The module '%1' was expected to contain an assembly manifest. MSI (s) (E8:28) [23:35:18:705]: Note: 1: 1935 2: 3: 0x80131018 4: IStream 5: Commit 6: MSI (s) (E8:28) [23:35:18:705]: Note: 1: 2337 2: 0 3: Microsoft.SqlServer.GridControl.dll MSI (s) (E8:28) [23:35:22:869]: Product: Microsoft SQL Server 2008 R2 Setup (English) -- Error 2337. The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. MSI (s) (E8:28) [23:35:22:916]: Internal Exception during install operation: 0xc0000005 at 0x000007FEE908A23E. MSI (s) (E8:28) [23:35:22:916]: WER report disabled for silent install. MSI (s) (E8:28) [23:35:22:932]: Internal MSI error. Installer terminated prematurely. Error 2337. The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. MSI (s) (E8:28) [23:35:22:932]: MainEngineThread is returning 1603 MSI (s) (E8:58) [23:35:22:932]: RESTART MANAGER: Session closed. Installer stopped prematurely. MSI (c) (0C:14) [23:35:22:947]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (0C:14) [23:35:22:947]: MainEngineThread is returning 1601 === Verbose logging stopped: 13/07/2011 23:35:22 ===

  Read the article

• Hanging of host network connections when starting KVM guest on bridge

  - by Chris Phillips

  Hi, I've a KVM system upon which I'm running a network bridge directly between all VM's and a bond0 (eth0, eth1) on the host OS. As such, all machines are presented on the same subnet, available outside of the box. The bond is doing mode 1 active / passive, with an arp_ip_target set to the default gateway, which has caused some issues in itself, but I can't see the bond configs mattering here myself. I'm seeing odd things most times when I stop and start a guest on the platform, in that on the host I lose network connectivity (icmp, ssh) for about 30 seconds. I don't lose connectivity on the other already running VM's though... they can always ping the default GW, but the host can't. I say "about 30 seconds" but from some tests it actually seems to be 28 seconds usually (or at least, I lose 28 pings...) and I'm wondering if this somehow relates to the bridge config. I'm not running STP on the bridge at all, and the forwarding delay is set to 1 second, path cost on the bond0 lowered to 10 and port priority of bond0 also lowered to 1. As such I don't think that the bridge should ever be able to think that bond0 is not connected just fine (as continued guest connectivity implies) yet the IP of the host, which is on the bridge device (... could that matter?? ) becomes unreachable. I'm fairly sure it's about the bridged networking, but at the same time as this happens when a VM is started there are clearly loads of other things also happening so maybe I'm way off the mark. Lack of connectivity: # ping 10.20.11.254 PING 10.20.11.254 (10.20.11.254) 56(84) bytes of data. 64 bytes from 10.20.11.254: icmp_seq=1 ttl=255 time=0.921 ms 64 bytes from 10.20.11.254: icmp_seq=2 ttl=255 time=0.541 ms type=1700 audit(1293462808.589:325): dev=vnet6 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.604:326): dev=vnet7 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.618:327): dev=vnet8 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdd694a kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 64 bytes from 10.20.11.254: icmp_seq=30 ttl=255 time=0.514 ms 64 bytes from 10.20.11.254: icmp_seq=31 ttl=255 time=0.551 ms 64 bytes from 10.20.11.254: icmp_seq=32 ttl=255 time=0.437 ms 64 bytes from 10.20.11.254: icmp_seq=33 ttl=255 time=0.392 ms brctl output of relevant bridge: # brctl showstp brdev brdev bridge id 8000.b2e1378d1396 designated root 8000.b2e1378d1396 root port 0 path cost 0 max age 19.99 bridge max age 19.99 hello time 1.99 bridge hello time 1.99 forward delay 0.99 bridge forward delay 0.99 ageing time 299.95 hello timer 0.50 tcn timer 0.00 topology change timer 0.00 gc timer 0.04 flags vnet5 (3) port id 8003 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags vnet0 (2) port id 8002 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags bond0 (1) port id 0001 state forwarding designated root 8000.b2e1378d1396 path cost 10 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 0001 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags I do see the new port listed as learning, but in line with the forward delay, only for 1 or 2 seconds when polling the brctl output on a loop. All pointers, tips or stabs in the dark appreciated.

  Read the article

• Wear and tear on server hard drive from filesystem polling by PHP script

  - by jackie

  So I'm working on a discussion platform, and various clients will visit http://host/thread.php, which will render the discussion thread to date in addition to a form to submit a new post. When a new post is submitted, I would like all of the other clients with browser windows open to have it appear in near-real-time. One of the constraints of my script is that it may not use a DBMS and it must stay in the filesystem. Additionally, I can't use any PECL/PEAR extensions like inotify or anything like that for IPC. The flow will look like this: Client A requests thread.php and the thread is so far empty, but nonetheless it opens a Server-Side Event at eventPusher.php. Client B does the same. Client A fills out a post in the form and and submits (POSTs) it to subHandler.php. ??? (subHandler stores the new submission into the main thread storefile which gets read from when a fresh, new client requests thread.php, in addition to somehow signalling to the continually-running eventPusher event-source that a new comment was posted and that it should echo the event-json to the client. How, exactly, it will send this signal I'm yet unsure of, but there are a few options that I've thought of -- this is the crux of the question, so see below for more clarification) eventPusher.php happily pushes the new event to the client and it shows up soon after it was originally submitted on all clients who have the page open's screens. Now for the #4 missing-link mystery-step, I see a few problems. I mean, either way, eventPusher is gonna be doing a while loop of some sort -- it's gonna be polling something, I think that much is clear. (If that's a bad assumption please do let me know.) Now, the simplest way would be subHandler gets invoked on the form submission, writes it to the main store in addition to newComments.xml, then exits without doing anything else. Then eventPusher checks in newComments.xml every X seconds (by the way, what would be a reasonable time interval here?) and if it finds something then it emits an event to the client. Now, my fear with this is that the server's hard drive will have to constantly start spinning up. Maybe this isn't the case, perhaps it would just get cached in RAM and the linux kernel would take care of this transparently such that filesystem access doesn't actually engage the device because the kernel knows that that particular file hasn't changed since last read. * idea #2: I have no idea how to go about this, but perhaps there is a variable scope that gets stored in general RAM on the system which can be read by any process. Like if we mega-exported a bash variable so that $new_post is normally false but it gets toggled to true by subHandler, and then back to flase once it's pushed to the client. I doubt there's such a variable scope in PHP directly, but I struggle with the concept of variable scope, I just can't seem to understand it no matter what I read on it. * idea #3: eventPusher queries ps in its whileloop for another instance of itself. If there's not another eventPusher active then it's highly unlikely that new comments will be getting submitted. It's okay if this only works =90% of the time, it doesn't need to be completely foolproof. * idea #4: eventPusher queries DMESG to see if that file's been written to recently. So to sum everything up, I need to have inter-php-script-communication in near-real-time that will work on a standard mod_php shared hosting setup without any elevated privileges, PHP addon modules, or other system adjustments that can't be done from the PHP script itself at runtime. With*out* spinning up the drive more than a few times. No SQL servers either. Apologies if my english isn't the best, I'm still trying to improve on it.

  Read the article

• Using PHP to connect to RADIUS works on one server but not another

  - by JDS

  I have a fleet of webservers that server a LAMP webapp broken into multiple customer apps by virtualhost/domain. The platform is Ubuntu 10.04 VM + PHP 5.3 + Apache 2.2.14, on top of VMware ESX (v4 I think). This stuff's not too important, though -- I'm just setting up the background. I have one customer that connects to a RADIUS server for authentication. We've found that the app responds as if some number of web servers are configured correctly and some are not. i.e. Apparently random authentication failures or successes, with no rhyme or reason. I did a lot of analysis of our fleet, and resolved it down to the differences between two specific web servers. I'll call them "A" and "B". "A" works. "B" does not. "Works" means "connects to and gets authentication data successfully from the RADIUS server". Ultimately, I'm looking for one thing that is different, and I've exhausted everything that I can come up with, so, looking for something else. Here are things I've looked at PHP package versions (all from Ubuntu repos). These are exactly the same across servers. PECL package. There are no PECL packages that aren't installed by apt. Other libraries or packages. Nothing that was network-related or RADIUS-related was different among servers. (There were some minor package differences, though.) Network or hosting environment. I found that some of the working servers were on the same physical environment as some not-working ones (i.e. same ESX containers). So, probably, the physical network layer is not the problem. Test case. I created a test case as follows. It works on the working servers, and fails on the not-working servers, very consistently. <?php $radius = radius_auth_open(); $username = 'theusername'; $password = 'thepassword'; $hostname = '12.34.56.78'; $radius_secret = '39wmmvxghg'; if (! radius_add_server($radius,$hostname,0,$radius_secret,5,3)) { die('Radius Error 1: ' . radius_strerror($radius) . "\n"); } if (! radius_create_request($radius,RADIUS_ACCESS_REQUEST)) { die('Radius Error 2: ' . radius_strerror($radius) . "\n"); } radius_put_attr($radius,RADIUS_USER_NAME,$username); radius_put_attr($radius,RADIUS_USER_PASSWORD,$password); switch (radius_send_request($radius)) { case RADIUS_ACCESS_ACCEPT: echo 'GOOD LOGIN'; break; case RADIUS_ACCESS_REJECT: echo 'BAD LOGIN'; break; case RADIUS_ACCESS_CHALLENGE: echo 'CHALLENGE REQUESTED'; break; default: die('Radius Error 3: ' . radius_strerror($radius) . "\n"); } ?>

  Read the article

• Week in Geek: LastPass Rescues Xmarks Edition

  - by Asian Angel

  This week we learned how to breathe new life into an aging Windows Mobile 6.x device, use filters in Photoshop, backup and move VirtualBox machines, use the BitDefender Rescue CD to clean an infected PC, and had fun setting up a pirates theme on our computers. Photo by _nash. Weekly Feature Do you love using the Faenza icon set on your Ubuntu system but feel that there are a few much needed icons missing (or you desire a different version of a particular icon)? Then you may want to take a look at the Faenza Variants icon pack. The icons are available in the following sizes: 16px, 22px, 32px, 48px and scalable sizes. Photo by Asian Angel. Faenza Variants Random Geek Links Another week with extra link goodness to help keep you on top of the news. Photo by Asian Angel. LastPass acquires Xmarks, premium service announced Xmarks announced that it has been acquired by LastPass, a cross-platform password management service. This also means that Xmarks is now in transition from a “free” to a “freemium” business model. WikiLeaks reappears on European Net domains WikiLeaks has re-emerged on a Swiss Internet domain followed by domains in Germany, Finland, and the Netherlands, sidestepping a move that had in effect taken the controversial site off the Internet. Iran: Yes, Stuxnet hurt our nuclear program The Stuxnet worm got some big play from Iranian President Mahmoud Ahmadinejad, who acknowledged that the malware dinged his nuclear program. More Windows Rogues than Just AV – Fake Defragmenter Check Disk Don’t think for a second that rogues are limited to scareware, because as so-called products such as “System Defragmenter”, “Scan Disk” “Check Disk” prove, they’re not. Internet Explorer’s Protected Mode can be bypassed Researchers from Verizon Business have now described a way of bypassing Protected Mode in IE 7 and 8 in order to gain access to user accounts. Can you really see who viewed your Facebook profile? Rogue application spreads virally Once again, a rogue application is spreading virally between Facebook users pretending to offer you a way of seeing who has viewed your profile. More holes in Palm’s WebOS Researchers Orlando Barrera and Daniel Herrera, who both work for security firm SecTheory, have discovered a gaping security hole in Palm’s WebOS smartphone operating system. Next-gen banking Trojans hit APAC With the proliferation of banking Trojans, Web and smartphone users of online banking services have to be on constant alert to avoid falling prey to fraud schemes, warned Etay Maor, project manager for RSA Fraud Action. AVG update cripples 64-bit computers A signature update automatically deployed by the AVG virus scanner Thursday has crippled numerous computers. Article includes link to forums to fix computers affected after a restart. Congress moves to outlaw ‘mystery charges’ for Web shoppers Legislation that makes it illegal for Web merchants and so-called post-transaction marketers to charge credit cards without the card owners’ say-so came closer to becoming law this week. Ballmer Set to “Look Into” Windows Home Server Drive Extender Fiasco Tuesday’s announcement from Microsoft regarding the removal of Drive Extender from Windows Home Server has sent shock waves across the web. Google tweaks search recipe to ding scam artists Google has changed its search algorithm to penalize sites deemed to provide an “extremely poor user experience” following a New York Times story on a merchant who justified abusive behavior towards customers as a search-engine optimization tactic. Geek Video of the Week Watch as our two friends debate back and forth about the early adoption of new technology through multiple time periods (Stone Age to the far future). Will our reluctant friend finally succumb to the temptation? Photo by CollegeHumor. Early Adopters Through History Random TinyHacker Links Fix Issues in Windows 7 Using Reliability Monitor Learn how to analyze Windows 7 errors and then fix them using the built-in reliability monitor. Learn About IE Tab Groups Tab groups is a useful feature in IE 8. Here’s a detailed guide to what it is all about. Google’s Book Helps You Learn About Browsers and Web A cool new online book by the Google Chrome team on browsers and the web. TrustPort Internet Security 2011 – Good Security from a Less Known Provider TrustPort is not exactly a well-known provider of security solutions. At least not in the consumer space. This review tests in detail their latest offering. How the World is Using Cell phones An infographic showing the shocking demographics of cell phone use. Super User Questions See the great answers to these questions from Super User. I am unable to access my C drive. It says it is unable to display current owner. List of Windows special directories/shortcuts like ‘%TEMP%’ Is using multiple passes for wiping a disk really necessary? How can I view two files side by side in Notepad++ Is there any tool that automatically puts screenshots to my Dropbox? How-To Geek Weekly Article Recap Look through our hottest articles from this past week at How-To Geek. How to Create a Software RAID Array in Windows 7 9 Alternatives for Windows Home Server’s Drive Extender Why Doesn’t Disk Cleanup Delete Everything from the Temp Folder? Ask the Readers: How Much Do You Customize Your Operating System? How to Upload Really Large Files to SkyDrive, Dropbox, or Email One Year Ago on How-To Geek Enjoy reading through these awesome articles from one year ago. How To Upgrade from Vista to Windows 7 Home Premium Edition How To Fix No Aero Transparency in Windows 7 Troubleshoot Startup Problems with Startup Repair Tool in Windows 7 & Vista Rename the Guest Account in Windows 7 for Enhanced Security Disable Error Reporting in XP, Vista, and Windows 7 The Geek Note That wraps things up here for this week. Regardless of the weather wherever you may be, we hope that you have an opportunity to get outside and have some fun! Remember to keep sending those great tips in to us at [email protected]. Photo by Tony the Misfit. Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

  Read the article

< Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >