Search Results

Search found 8071 results on 323 pages for 'active director'.

Page 269/323 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

  - by Srekel

  I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either. EDIT: Adding arp output: C:\Users\Srekel>arp -a Interface: 192.168.1.7 --- 0xd Internet Address Physical Address Type 192.168.1.1 00-1f-33-ef-28-01 dynamic 192.168.1.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Adding ipconfig... C:\Users\Srekel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Kakburken4 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TP-LINK Wireless N Adapter Physical Address. . . . . . . . . : 00-25-86-DF-C6-89 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 09 April 2010 23:09:45 Lease Expires . . . . . . . . . . : 10 April 2010 23:09:45 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : E0-CB-4E-26-B9-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E0-CB-4E-26-BE-94 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{74D5C406-894E-4000-8DE7-6AAEBF7C8382}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73ba:881:20c1:3f57:fef8(Preferred) Link-local IPv6 Address . . . . . : fe80::881:20c1:3f57:fef8%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

  Read the article

• Running Multiple WebLogic and OSB Domains

  - by jeff.x.davies

  I have any number of OSB domain created on my machine at any point in time. For example, I have different domains for different version of Oracle Service Bus and Oracle SOA Suite. I also have different domains for different purposes. I have a demo domain and another domain for the projects in my blog. Starting with OSB 11g and the Apache Derby server, there is a small "gotcha" if you want to create multiple domains on a devevelopment machine. When you create a new domain for OSB 11g it will use the same database info for all databases and this will cause an error when starting the admin server of the second domain (the first domain doesn't have to be running for this error to occur). Here is an example of the error message in the server console: ####<Mar 8, 2011 2:58:48 PM PST> <Critical> <JTA> <jeff-laptop> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1299625128464> <BEA-110482> <A logging last resource failed during initialization. The server cannot boot unless all configured logging last resources (LLRs) initialize. Failing reason: weblogic.transaction.loggingresource.LoggingResourceException: java.sql.SQLException: JDBC LLR, table verify failed for table 'WL_LLR_ADMINSERVER', row 'JDBC LLR Domain//Server' record had unexpected value 'osb11gR1PS3//AdminServer' expected 'OSBCIM//AdminServer'*** ONLY the original domain and server that creates an LLR table may access it *** The solution is to create a database instance for each of your domains and this is very simple to do. After you create a domain using the Configuration Wizard, locate the wlsbjmsrpDataSource-jdbc.xml file that is found under the DOMAIN_HOME/config/jdbc directory. Near the top of the file you will see the following entry: <url>jdbc:derby://localhost:1527/osbexamples;create=true;ServerName=localhost;databaseName=osbexamples</url> You need to modify this entry with a different and unique database name. The easiest way to do this is to substiture the name of your domain. For example: <url>jdbc:derby://localhost:1527/mydomain;create=true;ServerName=localhost;databaseName=mydomain</url> will create a database named mydomain . Now, when you restart the admin server for the domain, it will create the new database for you. Do this for each domain you create on your development machine and you'll have no troubles. The process is much simpler if you are creating a domain using the Configuration Wizard. Simply name the database when you get to the Configure JDBC Component Schema step of the Configuration Wizard, select the OSB JMS Reporting Provider and set the name in the DBMS/Service field to whatever name you like, as shown in Figure 1 below. Figure 1 – Configuring the JDBC Component Schema That is all there is to it. Now you can create as many domains on your leptop or development machine as you like and not have to worry about them conflicting with each other.

  Read the article

• Fill a Flash Drive with Portable Software using Lupo PenSuite

  - by Asian Angel

  A flash drive full of portable software is helpful to have along wherever you go. The Lupo PenSuite lets you choose from three different versions to get the best fit for your everyday needs. Note: If running the full version you will need a 512 MB USB flash drive or larger. Using Lupo PenSuite The one window to watch for during the setup process is where you have the opportunity to add a specific language pack if needed. Outside of that all that you need to do is sit back and wait for the suite to be extracted. Note: Extraction times will vary based on version and extraction location. Here we browsed to our flash drive to extract it to… Once the setup process is complete locate and double click the Lupo_PenSuite.exe file. This one time window will present you the opportunity to start using the suite immediately, or go directly into the options. When the suite is active you will have a new system tray icon that operates as a start menu button. At the bottom you can monitor the remaining room on your flash drive, and use the close button to exit the suite (may display as a power button based on menu theme). A quick look at the set up inside the suite. There is a pre-configured area for organizing and storing your personal files. Prefer a classic style menu? Just select for it in the options (various tab) and enjoy a smaller streamlined look. Note: You can also change the theme for the regular menu and add a user pic. The suite provides access to your portable software and online sites. You get to enjoy the best of both as shown in the following examples. Websites will open using the suite’s portable Firefox install. VLC is ready to play your downloaded videos. The suite also has some very nice photo editing programs added in. Installing Additional Apps If one of your favorite programs is not included in the suite version, it only takes a few minutes to add it in. Go to the Additional Apps webpage, download the app(s), and extract them onto your hard-drive. Note: Link for additional apps webpage provided below. Add the extracted app(s) to the MyApps folder in the suite’s folder hierarchy. Click on ASuite in the suite’s start menu. Drag and drop the portable app’s exe file into the MyApps section in the ASuite window. Your new software’s shortcut should display as shown here. Close this window when finished. Checking the suite’s start menu will show your new software ready to be used. Conclusion If you need a good portable software collection to carry with you on a flash drive then Lupo PenSuite is definitely worth taking a look at. We tested Lupo PenSuite on XP, Vista, and Windows 7 and it works great on all three. Another popular choice is PortableApps and you can check out our Review of that too they are essentially the same thing, each is just packaged differently. Links Download Lupo PenSuite (Full, Lite, & Zero versions) *Download links approximately one-third down the page. Download Additional Apps for Lupo PenSuite Download Additional Skins for Lupo PenSuite Start Menu View Video Tutorials *Has tutorial for easy updating of entire suite. Similar Articles Productive Geek Tips Install and Run Applications from Your iPod, Flash Drive or Mp3 PlayerRebit Backup Software [Review]BitLocker To Go Encrypts Portable Flash Drives in Windows 7Create a Bootable Ubuntu USB Flash Drive the Easy WaySpeed up Your Windows Vista Computer with ReadyBoost TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor

  Read the article

• EXCEL VBA STUDENTS DATABASE [on hold]

  - by BENTET

  I AM DEVELOPING AN EXCEL DATABASE TO RECORD STUDENTS DETAILS. THE HEADINGS OF THE TABLE ARE DATE,YEAR, PAYMENT SLIP NO.,STUDENT NUMBER,NAME,FEES,AMOUNT PAID, BALANCE AND PREVIOUS BALANCE. I HAVE BEEN ABLE TO PUT UP SOME CODE WHICH IS WORKING, BUT THERE ARE SOME SETBACKS THAT I WANT TO BE ADDRESSED.I ACTUALLY DEVELOPED A USERFORM FOR EACH PROGRAMME OF THE INSTITUTION AND ASSIGNED EACH TO A SPECIFIC SHEET BUT WHENEVER I ADD A RECORD, IT DOES NOT GO TO THE ASSIGNED SHEET BUT GOES TO THE ACTIVE SHEET.ALSO I WANT TO HIDE ALL SHEETS AND BE WORKING ONLY ON THE USERFORMS WHEN THE WORKBOOK IS OPENED.ONE PROBLEM AM ALSO FACING IS THE UPDATE CODE.WHENEVER I UPDATE A RECORD ON A SPECIFIC ROW, IT RATHER EDIT THE RECORD ON THE FIRST ROW NOT THE RECORD EDITED.THIS IS THE CODE I HAVE BUILT SO FAR.I AM VIRTUALLY A NOVICE IN PROGRAMMING. Private Sub cmdAdd_Click() Dim lastrow As Long lastrow = Sheets("Sheet4").Range("A" & Rows.Count).End(xlUp).Row Cells(lastrow + 1, "A").Value = txtDate.Text Cells(lastrow + 1, "B").Value = ComBox1.Text Cells(lastrow + 1, "C").Value = txtSlipNo.Text Cells(lastrow + 1, "D").Value = txtStudentNum.Text Cells(lastrow + 1, "E").Value = txtName.Text Cells(lastrow + 1, "F").Value = txtFees.Text Cells(lastrow + 1, "G").Value = txtAmountPaid.Text txtDate.Text = "" ComBox1.Text = "" txtSlipNo.Text = "" txtStudentNum.Text = "" txtName.Text = "" txtFees.Text = "" txtAmountPaid.Text = "" End Sub Private Sub cmdClear_Click() txtDate.Text = "" ComBox1.Text = "" txtSlipNo.Text = "" txtStudentNum.Text = "" txtName.Text = "" txtFees.Text = "" txtAmountPaid.Text = "" txtBalance.Text = "" End Sub Private Sub cmdClearD_Click() txtDate.Text = "" ComBox1.Text = "" txtSlipNo.Text = "" txtStudentNum.Text = "" txtName.Text = "" txtFees.Text = "" txtAmountPaid.Text = "" txtBalance.Text = "" End Sub Private Sub cmdClose_Click() Unload Me End Sub Private Sub cmdDelete_Click() 'declare the variables Dim findvalue As Range Dim cDelete As VbMsgBoxResult 'check for values If txtStudentNum.Value = "" Or txtName.Value = "" Or txtDate.Text = "" Or ComBox1.Text = "" Or txtSlipNo.Text = "" Or txtFees.Text = "" Or txtAmountPaid.Text = "" Or txtBalance.Text = "" Then MsgBox "There is not data to delete" Exit Sub End If 'give the user a chance to change their mind cDelete = MsgBox("Are you sure that you want to delete this student", vbYesNo + vbDefaultButton2, "Are you sure????") If cDelete = vbYes Then 'delete the row Set findvalue = Sheet4.Range("D:D").Find(What:=txtStudentNum, LookIn:=xlValues) findvalue.EntireRow.Delete End If 'clear the controls txtDate.Text = "" ComBox1.Text = "" txtSlipNo.Text = "" txtStudentNum.Text = "" txtName.Text = "" 'txtFees.Text = "" txtAmountPaid.Text = "" txtBalance.Text = "" End Sub Private Sub cmdSearch_Click() Dim lastrow As Long Dim currentrow As Long Dim studentnum As String lastrow = Sheets("Sheet4").Range("A" & Rows.Count).End(xlUp).Row studentnum = txtStudentNum.Text For currentrow = 2 To lastrow If Cells(currentrow, 4).Text = studentnum Then txtDate.Text = Cells(currentrow, 1) ComBox1.Text = Cells(currentrow, 2) txtSlipNo.Text = Cells(currentrow, 3) txtStudentNum.Text = Cells(currentrow, 4).Text txtName.Text = Cells(currentrow, 5) txtFees.Text = Cells(currentrow, 6) txtAmountPaid.Text = Cells(currentrow, 7) txtBalance.Text = Cells(currentrow, 8) End If Next currentrow txtStudentNum.SetFocus End Sub Private Sub cmdSearchName_Click() Dim lastrow As Long Dim currentrow As Long Dim studentname As String lastrow = Sheets("Sheet4").Range("A" & Rows.Count).End(xlUp).Row studentname = txtName.Text For currentrow = 2 To lastrow If Cells(currentrow, 5).Text = studentname Then txtDate.Text = Cells(currentrow, 1) ComBox1.Text = Cells(currentrow, 2) txtSlipNo.Text = Cells(currentrow, 3) txtStudentNum.Text = Cells(currentrow, 4) txtName.Text = Cells(currentrow, 5).Text txtFees.Text = Cells(currentrow, 6) txtAmountPaid.Text = Cells(currentrow, 7) txtBalance.Text = Cells(currentrow, 8) End If Next currentrow txtName.SetFocus End Sub Private Sub cmdUpdate_Click() Dim tdate As String Dim tlevel As String Dim tslipno As String Dim tstudentnum As String Dim tname As String Dim tfees As String Dim tamountpaid As String Dim currentrow As Long Dim lastrow As Long 'If Cells(currentrow, 5).Text = studentname Then 'txtDate.Text = Cells(currentrow, 1) lastrow = Sheets("Sheet4").Range("A" & Columns.Count).End(xlUp).Offset(0, 1).Column For currentrow = 2 To lastrow tdate = txtDate.Text Cells(currentrow, 1).Value = tdate txtDate.Text = Cells(currentrow, 1) tlevel = ComBox1.Text Cells(currentrow, 2).Value = tlevel ComBox1.Text = Cells(currentrow, 2) tslipno = txtSlipNo.Text Cells(currentrow, 3).Value = tslipno txtSlipNo = Cells(currentrow, 3) tstudentnum = txtStudentNum.Text Cells(currentrow, 4).Value = tstudentnum txtStudentNum.Text = Cells(currentrow, 4) tname = txtName.Text Cells(currentrow, 5).Value = tname txtName.Text = Cells(currentrow, 5) tfees = txtFees.Text Cells(currentrow, 6).Value = tfees txtFees.Text = Cells(currentrow, 6) tamountpaid = txtAmountPaid.Text Cells(currentrow, 7).Value = tamountpaid txtAmountPaid.Text = Cells(currentrow, 7) Next currentrow txtDate.SetFocus ComBox1.SetFocus txtSlipNo.SetFocus txtStudentNum.SetFocus txtName.SetFocus txtFees.SetFocus txtAmountPaid.SetFocus txtBalance.SetFocus End Sub PLEASE I WAS THINKING IF I CAN DEVELOP SOMETHING THAT WILL USE ONLY ONE USERFORM TO SEND DATA TO DIFFERENT SHEETS IN THE WORKBOOK.

  Read the article

• La Universidad Estatal de California estandariza 23 campus a través de Oracle PeopleSoft

  - by Noelia Gomez

  Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} El sistema universitario más grande de los Estados Unidos consolida la Gestión Financiera y consolidará la gestión del capital humano para mejorar la eficiencia y reducir los costes. Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} La Universidad Estatal de California (CSU) está estandarizando su sistema de 23 campus y la Oficina del Rector con las aplicaciones de Oracle PeopleSoft. La CSU es el mayor sistema universitario público en los Estados Unidos. Los premios CSU con 90.000 grados por año y desde su creación en 1961, ha otorgado casi 2,6 millones. Como parte de su plan estratégico, “Acces to Excellence”, la CSU se ha comprometido a tomar ventaja de la tecnología para satisfacer las futuras necesidades de educación y ha creado los Sistemas Comunes de Gestión (CMS). La misión de CMS es brindar un servicio de calidad eficiente, eficaz y de calidad a los estudiantes, profesores y personal de los 23 campus de la CSU y la Oficina del Decanato. En un esfuerzo por mejorar la eficiencia y reducir los costes de todo el sistema, la CSU ha consolidado sus procesos de gestión financiera y los sistemas a través de PeopleSoft Financial Management. Para proporcionar una visión unificada de las operaciones financieras, CSU ha consolidado 22 campus en un mismo sistema a través de PeopleSoft Financials. Estas aplicaciones incluyen: Contabilidad, Facturación, Cuentas a Pagar, Cuentas a Cobrar y Compras. CSU también utiliza Oracle Business Intelligence Enterprise Edition para el análisis y presentación de informes. CSU está consolidando en PeopleSoft Human Capital Management (HCM) en pos de varios objetivos estratégicos como, entre otros: atraer y retener al personal superior y de la facultad. El sistema financiero consolidad de la CSU es ahora el mayor despliegue único de educación superior de PeopleSoft Financials en los Estados Unidos. Una centralización de esta envergadura no tiene precedentes, y sin embargo todavía se completó a tiempo y dentro del presupuesto. Una vez completado, la CSU también será el mayor despliegue de educación superior de PeopleSoft HCM. CSU también utiliza PeopleSoft Campus Solutions para gestionar sus operaciones académicas de los estudiantes, incluyendo la programación y registro de clases, cálculo y recaudación de las tasas, la concesión de la ayuda financiera y la evaluación y el progreso académico de los estudiantes. Las aplicaciones de Oracle PeopleSoft están diseñadas para atender las necesidades de negocio más complejas. Estas proveen soluciones integrales de negocios y de industria, permitiendo a las organizaciones aumentar la productividad, acelerar el rendimiento del negocio y un menor coste total de propiedad.PeopleSoft de Oracle Campus Solutions es una completa suite de software diseñado para las necesidades cambiantes de las instituciones de educación superior. Oracle sigue colaborando con la CSU y los colegios y universidades de todo el mundo para ofrecer los sistemas de administración y desarrollo de estudiantes más sensible y comprensivo y disponibles en la actualidad. Unisys está implantando aplicaciones PeopleSoft CSU y facilitando el acceso a los estudiantes, profesores y personal de las universidades a través de la solución de Unisys Hosted Secure Private Cloud. Unisys es un miembro de nivel Platino de Oracle PartnerNetwork (OPN). "Con el fin de seguir cumpliendo los objetivos de nuestro plan estratégico, creemos que es fundamental para estandarizar nuestros procesos operativos - tanto en el back office como allí donde lleguen nuestros estudiantes todos los días - maximizar nuestra inversión en tecnología y reducir costes", dijo Larry Furukawa-Schlereth, Director de Finanzas, Sonoma State University, y presidente del Comité Global Ejecutivo de Gestión de la CSU, California State University. "Contar con una vista única de toda la información importante en un sistema ayuda a la Universidad Estatal de California a continuar ofreciendo excelentes oportunidades de educación a un coste asequible mientras ayudamos a dar forma a la futura calidad de vida cívica y económica en California". Conozca más sobre Peoplesoft aquí: Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle’s PeopleSoft Applications Oracle in Higher Education Oracle’s PeopleSoft Financial Management Oracle’s PeopleSoft Human Capital Management Oracle’s PeopleSoft Campus Solutions Oracle Human Capital Management Blog Oracle HCM on Twitter Oracle Higher Education on Facebook Oracle Higher Education on Diigo

  Read the article

• CEN/CENELEC Lacks Perspective

  - by trond-arne.undheim

  Over the last few months, two of the European Standardization Organizations (ESOs), CEN and CENELEC have circulated an unfortunate position statement distorting the facts around fora and consortia. For the benefit of outsiders to this debate, let's just say that this debate regards whether and how the EU should recognize standards and specifications from certain fora and consortia based on a process evaluating the openness and transparency of such deliverables. The topic is complex, and somewhat confusing even to insiders, but nevertheless crucial to the European economy. As far as I can judge, their positions are not based on facts. This is unfortunate. For the benefit of clarity, here are some of the observations they make: a)"Most consortia are in essence driven by technology companies making hardware and software solutions, by definition very few of the largest ones are European-based". b) "Most consortia lack a European presence, relevant Committees, even those that are often cited as having stronger links with Europe, seem to lack an overall, inclusive set of participants". c) "Recognising specific consortia specifications will not resolve any concrete problems of interoperability for public authorities; interoperability depends on stringing together a range of specifications (from formal global bodies or consortia alike)". d) "Consortia already have the option to have their specifications adopted by the international formal standards bodies and many more exercise this than the two that seem to be campaigning for European recognition. Such specifications can then also be adopted as European standards." e) "Consortium specifications completely lack any process to take due and balanced account of requirements at national level - this is not important for technologies but can be a critical issue when discussing cross-border issues within the EU such as eGovernment, eHealth and so on". f) "The proposed recognition will not lead to standstill on national or European activities, nor to the adoption of the specifications as national standards in the CEN and CENELEC members (usually in their official national languages), nor to withdrawal of conflicting national standards. A big asset of the European standardization system is its coherence and lack of fragmentation." g) "We always miss concrete and specific examples of where consortia referencing are supposed to be helpful." First of all, note that ETSI, the third ESO, did not join the position. The reason is, of course, that ETSI beyond being an ESO, also has a global perspective and, moreover, does consider reality. Secondly, having produced arguments a) to g), CEN/CENELEC has the audacity to call a meeting on Friday 25 February entitled "ICT standardization - improving collaboration in Europe". This sounds very nice, but they have not set the stage for constructive debate. Rather, they demonstrate a striking lack of vision and lack of perspective. I will back this up by three facts, and leave it there. 1. Since the 1980s, global industry fora and consortia, such as IETF, W3C and OASIS have emerged as world-leading ICT standards development organizations with excellent procedures for openness and transparency in all phases of standards development, ex post and ex ante. - Practically no ICT system can be built without using fora and consortia standards (FCS). - Without using FCS, neither the Internet, upon which the EU economy depends, nor EU institutions would operate. - FCS are of high relevance for achieving and promoting interoperability and driving innovation. 2. FCS are complementary to the formally recognized standards organizations including the ESOs. - No work will be taken away from the ESOs should the EU recognize certain FCS. - Each FCS would be evaluated on its merit and on the openness of the process that produced it. ESOs would, with other stakeholders, have a say. - ESOs could potentially educate and assist European stakeholders to engage more actively and constructively with FCS. - ETSI, also an ESO, seems to clearly recognize these facts. 3. Europe and its Member States have a strong voice in several of the most relevant global industry fora and consortia. - W3C: W3C was founded in 1994 by an Englishman, Sir Tim Berners-Lee, in collaboration with CERN, the European research lab. In April 1995, INRIA (Institut National de Recherche en Informatique et Automatique) in France became the first European W3C host and in 2003, ERCIM (European Research Consortium in Informatics and Mathematics), also based in France, took over the role of European W3C host from INRIA. Today, W3C has 326 Members, 40% of which are European. Government participation is also strong, and it could be increased - a development that is very much desired by W3C. Current members of the W3C Advisory Board includes Ora Lassila (Nokia) and Charles McCathie Nevile (Opera). Nokia is Finnish company, Opera is a Norwegian company. SAP's Claus von Riegen is an alumni of the same Advisory Board. - OASIS: its membership - 30% of which is European - represents the marketplace, reflecting a balance of providers, user companies, government agencies, and non-profit organizations. In particular, about 15% of OASIS members are governments or universities. Frederick Hirsch from Nokia, Claus von Riegen from SAP AG and Charles-H. Schulz from Ars Aperta are on the Board of Directors. Nokia is a Finnish company, SAP is a German company and Ars Aperta is a French company. The Chairman of the Board is Peter Brown, who is an Independent Consultant, an Austrian citizen AND an official of the European Parliament currently on long-term leave. - IETF: The oversight of its activities is by the Internet Architecture Board (IAB), since 2007 chaired by Olaf Kolkman, a Dutch national who lives in Uithoorn, NL. Kolkman is director of NLnet Labs, a foundation chartered to develop open source software and open source standards for the Internet. Other IAB members include Marcelo Bagnulo whose affiliation is the University Carlos III of Madrid, Spain as well as Hannes Tschofenig from Nokia Siemens Networks. Nokia is a Finnish company. Siemens is a German company. Nokia Siemens is a European joint venture. - Member States: At least 17 European Member States have developed Interoperability Frameworks that include FCS, according to the EU-funded National Interoperability Framework Observatory (see list and NIFO web site on IDABC). This also means they actively procure solutions using FCS, reference FCS in their policies and even in laws. Member State reps are free to engage in FCS, and many do. It would be nice if the EU adjusted to this reality. - A huge number of European nationals work in the global IT industry, on European soil or elsewhere, whether in EU registered companies or not. CEN/CENELEC lacks perspective and has engaged in an effort to twist facts that is quite striking from a publicly funded organization. I wish them all possible success with Friday's meeting but I fear all of the most important stakeholders will not be at the table. Not because they do not wish to collaborate, but because they just have been insulted. If they do show up, it would be a gracious move, almost beyond comprehension. While I do not expect CEN/CENELEC to line up perfectly in favor of fora and consortia, I think it would be to their benefit to stick to more palatable observations. Actually, I would suggest an apology, straightening out the facts. This works among friends and it works in an organizational context. Then, we can all move on. Standardization is important. Too important to ignore. Too important to distort. The European economy depends on it. We need CEN/CENELEC. It is an important organization. But CEN/CENELEC needs fora and consortia, too.

  Read the article

• Workshops, online content show how Oracle infuses simplicity, mobility, extensibility into user experience

  - by mvaughan

  By Kathy Miedema & Misha Vaughan, Oracle Applications User Experience Oracle has made a huge investment into the user experience of its many different software product families, and recent releases showcase big changes and features that aim to promote end user engagement and efficiency by streamlining navigation and simplifying the user interface. But making Oracle’s enterprise software great-looking and usable doesn’t stop when Oracle products go out the door. The Applications User Experience (UX) team recognizes that our customers may need to customize software to fit their work processes. And that’s why we provide tools such as user experience design patterns to help you maintain the Oracle user experience as you tailor your application to fit your business needs. Often, however, customers may need some context around user experience. How has the Oracle user experience been designed and constructed? Why is a good user experience important for users? How does understanding what goes into the user experience benefit the people who purchase the software for users? There’s a short answer to these questions, and you can read about it on Usable Apps. But truly understanding Oracle’s investment and seeing how it applies across product families occasionally requires a deeper dive into the Oracle user experience, especially if you’re an influencer or decision-maker about Oracle products. To help frame these decisions, the Communications & Outreach team has developed several targeted workshops that explore what Oracle means when it talks about user experience, and provides a roadmap into where the Oracle user experience is going. These workshops require non-disclosure agreements, and have been delivered to Oracle sales folks, Oracle partners, Oracle ACE Directors and ACEs, and a few customers. Some of these audience members have been developers or have a technical background; just as many did not. Here’s a breakdown of the kind of training you can get around the Oracle user experience from the OAUX Communications & Outreach team.For Partners: George Papazzian, Principal, Naviscent with Joyce Ohgi, Oracle Oracle Fusion Applications HCM Pre-Sales Seminar:  In concert with Worldwide Alliances  and  Channels under Applications Partner Enablement Director Jonathan Vinoskey’s guidance, the Applications User Experience team delivers a two-day workshop.  Day one focuses on Oracle Fusion Applications HCM and pre-sales strategy, and Day two focuses on positioning and leveraging Oracle’s investment in the Oracle Fusion Applications user experience.  The next workshops will occur on the following dates: December 4-5, 2013 @ Manchester, UK January 29-30, 2014 @ Reston, Virginia February 2014 @ Guadalajara, Mexico (email: Shannon Whiteman) March 11-12, 2014 @ Dubai, United Arab Emirates April 1-2, 2014 @ Chicago, Illinois Partner Advisory Board: A two-day board meeting in the U.S. and U.K. to discuss four main user experience areas for Oracle Fusion Applications: simplicity, visualization & analytics, mobility, & futures. This event is limited to Oracle Diamond Partners, UX bloggers, and key UX influencers and requires legal documentation.  We will be talking about the Oracle applications UX strategy and roadmap. Partner Implementation Training on User Interface: How to Build Great-Looking, Usable Apps:  In this two-day, hands-on workshop built around Oracle’s Application Development Framework, learn how to build desktop and mobile user interfaces and mobile user interfaces based on Oracle’s experience with Fusion Applications. This workshop is for partners with a technology background who are looking for ways to tailor Fusion Applications using ADF, or have built their own custom solutions using ADF. It includes an introduction to UX design patterns and provides tools to build usability-tested UX designs. Nov 5-6, 2013 @ Redwood Shores, CA, USA January 28-29th, 2014 @ Reston, Virginia, USA February 25-26, 2014 @ Guadalajara, Mexico March 9-10, 2014 @ Dubai, United Arab Emirates To register, contact [email protected] Simplified UI Customization & Extensibility:  Pilot workshop:  We will be reviewing the proposed content for communicating the user experience tool kit available with the next release of Oracle Fusion Applications.  Our core focus will be on what toolkit components our system implementors and independent software vendors will need to respond to customer demand, whether they are extending Fusion Applications, or building custom applications, that will need to leverage the simplified UI. Dec 11th, 2013 @ Reading, UK For information: contact [email protected] Private lab tour and demos: Interested in seeing what’s going on in the Apps UX Labs?  If you are headed to the San Francisco Bay Area, let us know. We can arrange a spin through our usability labs at headquarters. OAUX Expo: This open-house forum gives partners a look at what the UX team is working on, and showcases the next-generation user experiences in a demo environment where attendees can see and touch the applications. UX Direct: Use the same methods that Oracle uses to develop its own user experiences. We help you define your users and their needs, and then provide direction on how to tailor the best user experience you can for them. For CustomersAngela Johnston, Gozel Aamoth, Teena Singh, and Yen Chan, Oracle Lab tours: See demos of soon-to-be-released products, and take a spin on usability research equipment such as our eye-tracker. Watch this video to get an idea of what you’ll see. Get our newsletter: Learn about newly released products and see where you can meet us at user group conferences. Participate in a feedback session: Join a focus group or customer feedback session to get an early look at user experience designs for the next generation of software, and provide your thoughts on how well it will work. Join the OUAB: The Oracle Usability Advisory Board meets several times a year to discuss trends in the workforce and provide direction on user experience designs. UX Direct: Use the same methods that Oracle uses to develop its own user experiences. We help you define your users and their needs, and then provide direction on how to tailor the best user experience you can for them. For Developers (customers, partners, and consultants): Plinio Arbizu, SP Solutions, Richard Bingham, Oracle, Balaji Kamepalli, EiSTechnoogies, Praveen Pillalamarri, EiSTechnologies How to Build Great-Looking, Usable Apps: This workshop is for attendees with a strong technology background who are looking for ways to tailor customer software using ADF. It includes an introduction to UX design patterns and provides tools to build usability-tested UX designs.  See above for dates and times. UX design patterns web site: Cut the length of your project down by months. Use these patterns to build out the task flow you need to develop for your users. The patterns have already been usability-tested and represent the best practices that the Oracle UX research team has found in its studies. UX Direct: Use the same methods that Oracle uses to develop its own user experiences. We help you define your users and their needs, and then provide direction on how to tailor the best user experience you can for them. For Oracle Sales Mike Klein, Jeremy Ashley, Brent White, Oracle Contact your local sales person for more information about the Oracle user experience and the training available from the Applications User Experience Communications & Outreach team. See customer-friendly user experience collateral ranging from the new simplified UI in Oracle Fusion Applications Release 7, to E-Business Suite user experience highlights, to Siebel, PeopleSoft, and JD Edwards user experience highlights.   Receive access to the same pre-sales and implementation training we provide to partners. For Oracle Sales only: Oracle-only training on the Oracle Fusion Applications UX Innovation Sales Kit.

  Read the article

• Silverlight Cream for January 08, 2011 -- #1023

  - by Dave Campbell

  In this Heavy and yet incomplete Issue: Mike Wolf, Walter Ferrari, Colin Eberhardt, Mathew Charles, Don Burnett, Senthil Kumar, cherylws, Rob Miles, Derik Whittaker, Thomas Martinsen(-2-), Jason Ginchereau, Vishal Nayan, and WindowsPhoneGeek. Above the Fold: Silverlight: "Automatically Showing ToolTips on a Trimmed TextBlock (Silverlight)" Colin Eberhardt WP7: "Windows Phone Blue Book Pdf" Rob Miles Sharepoint/Silverlight: "Discover Sharepoint with Silverlight - Part 1" Walter Ferrari Shoutouts: Dave Isbitski has announced a WP7 Firestarter, check for your local MS office: Announcing the “Light up your Silverlight Applications for Windows 7 Firestarter” From SilverlightCream.com: Leveraging Silverlight in the USA TODAY Windows 7-Based Slate App Mike Wolf has a post up about Cynergy's release of the new USA TODAY software for Windows 7 Slate devices, and gives a great rundown of all the resources, and how specific Silverlight features were used... tons of outstanding external links here! Discover Sharepoint with Silverlight - Part 1 Walter Ferrari has tutorial up at SilverlightShow... looks like the first in a series on Silverlight and Sharepoint... lots of low-level info about the internals and using them. Automatically Showing ToolTips on a Trimmed TextBlock (Silverlight) Colin Eberhardt has a really cool AutoTooltip attached behavior that gives a tooltip of the actual text if text is trimmed ... and has an active demo on the post... very cool. RIA Services Output Caching Mathew Charles digs into a RIA feature that hasn't gotten any blog love: output caching, describing all the ins and outs of improving the performance of your app using caching. Emailing your Files to Box.net Cloud Storage with WP7 Don Burnett details out everything you need to do to get Box.Net and your WP7 setup to talk to each other. Shortcuts keys for Developing on Windows Phone 7 Emulator Senthil Kumar has some good WP7 posts up ... this one is a cheatsheet list of Function-key assignements for the WP7 emulator... another sidebar listint Windows Phone 7 Design Guidelines – Cheat Sheet cherylws has a great Guideline list/Cheat Sheet up for reference while building a WP7 app... this is a great reference... I'm adding it to the Right-hand sidebar of WynApse.com Windows Phone Blue Book Pdf Rob Miles has added another book and color to his collection of both -- Windows Phone Programming in C#, also known as the Windows Phone Blue Book... get a copy from the links he gives, and check out his other free books as well. Navigating to an external URL using the HyperlinkButton Derik Whittaker has a post up discussing the woes (and error messages) of trying to navigate to an external URL with the Hyperlink button in WP7, plus his MVVM-friendly solution that you can download. Set Source on Image from code in Silverlight Thomas Martinsen has a couple posts up... first is this quick one on the code required to set an image source. Show UI element based on authentication Thomas Martinsen's latest is one on a BoolToVisibilityConverter allowing a boolean indicator of Authentication to be used to control the visibility of a button (in the sample) WP7 ReorderListBox improvements: rearrange animations and more Jason Ginchereau has updated his ReorderListBox from last week to add some animations (fading/sliding) during the rearrangement. Navigation in Silverlight Without Using Navigation Framework Vishal Nayan has a post that attracted my attention... Navigation by manipulating RootVisual content... I've been knee-deep in similar code in Prism this week (and why my blogging is off) ... Creating a WP7 Custom Control in 7 Steps WindowsPhoneGeek creates a simple custom control for WP7 before your very eyes in his latest post, focusing on the minimum requirements necessary for writing a Custom Control. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Application Performance Episode 2: Announcing the Judges!

  - by Michaela Murray

  The story so far… We’re writing a new book for ASP.NET developers, and we want you to be a part of it! If you work with ASP.NET applications, and have top tips, hard-won lessons, or sage advice for avoiding, finding, and fixing performance problems, we want to hear from you! And if your app uses SQL Server, even better – interaction with the database is critical to application performance, so we’re looking for database top tips too. There’s a Microsoft Surface apiece for the person who comes up with the best tip for SQL Server and the best tip for .NET. Of course, if your suggestion is selected for the book, you’ll get full credit, by name, Twitter handle, GitHub repository, or whatever you like. To get involved, just email your nuggets of performance wisdom to [email protected] – there are examples of what we’re looking for and full competition details at Application Performance: The Best of the Web. Enter the judges… As mentioned in my last blogpost, we have a mystery panel of celebrity judges lined up to select the prize-winning performance pointers. We’re now ready to reveal their secret identities! Judging your ASP.NET  tips will be: Jean-Phillippe Gouigoux, MCTS/MCPD Enterprise Architect and MVP Connected System Developer. He’s a board member at French software company MGDIS, and teaches algorithms, security, software tests, and ALM at the Université de Bretagne Sud. Jean-Philippe also lectures at IT conferences and writes articles for programming magazines. His book Practical Performance Profiling is published by Simple-Talk. Nik Molnar,  a New Yorker, ASP Insider, and co-founder of Glimpse, an open source ASP.NET diagnostics and debugging tool. Originally from Florida, Nik specializes in web development, building scalable, client-centric solutions. In his spare time, Nik can be found cooking up a storm in the kitchen, hanging with his wife, speaking at conferences, and working on other open source projects. Mitchel Sellers, Microsoft C# and DotNetNuke MVP. Mitchel is an experienced software architect, business leader, public speaker, and educator. He works with companies across the globe, as CEO of IowaComputerGurus Inc. Mitchel writes technical articles for online and print publications and is the author of Professional DotNetNuke Module Programming. He frequently answers questions on StackOverflow and MSDN and is an active participant in the .NET and DotNetNuke communities. Clive Tong, Software Engineer at Red Gate. In previous roles, Clive spent a lot of time working with Common LISP and enthusing about functional languages, and he’s worked with managed languages since before his first real job (which was a long time ago). Long convinced of the productivity benefits of managed languages, Clive is very interested in getting good runtime performance to keep managed languages practical for real-world development. And our trio of SQL Server specialists, ready to select your top suggestion, are (drumroll): Rodney Landrum, a SQL Server MVP who writes regularly about Integration Services, Analysis Services, and Reporting Services. He’s authored SQL Server Tacklebox, three Reporting Services books, and contributes regularly to SQLServerCentral, SQL Server Magazine, and Simple–Talk. His day job involves overseeing a large SQL Server infrastructure in Orlando. Grant Fritchey, Product Evangelist at Red Gate and SQL Server MVP. In an IT career spanning more than 20 years, Grant has written VB, VB.NET, C#, and Java. He’s been working with SQL Server since version 6.0. Grant volunteers with the Editorial Committee at PASS and has written books for Apress and Simple-Talk. Jonathan Allen, leader and founder of the PASS SQL South West user group. He’s been working with SQL Server since 1999 and enjoys performance tuning, development, and using SQL Server for business solutions. He’s spoken at SQLBits and SQL in the City, as well as local user groups across the UK. He’s also a moderator at ask.sqlservercentral.com.

  Read the article

• Monitor and Control Memory Usage in Google Chrome

  - by Asian Angel

  Do you want to know just how much memory Google Chrome and any installed extensions are using at a given moment? With just a few clicks you can see just what is going on under the hood of your browser. How Much Memory are the Extensions Using? Here is our test browser with a new tab and the Extensions Page open, five enabled extensions, and one disabled at the moment. You can access Chrome’s Task Manager using the Page Menu, going to Developer, and selecting Task manager… Or by right clicking on the Tab Bar and selecting Task manager. There is also a keyboard shortcut (Shift + Esc) available for the “keyboard ninjas”. Sitting idle as shown above here are the stats for our test browser. All of the extensions are sitting there eating memory even though some of them are not available/active for use on our new tab and Extensions Page. Not so good… If the default layout is not to your liking then you can easily modify the information that is available by right clicking and adding/removing extra columns as desired. For our example we added Shared Memory & Private Memory. Using the about:memory Page to View Memory Usage Want even more detail? Type about:memory into the Address Bar and press Enter. Note: You can also access this page by clicking on the Stats for nerds Link in the lower left corner of the Task Manager Window. Focusing on the four distinct areas you can see the exact version of Chrome that is currently installed on your system… View the Memory & Virtual Memory statistics for Chrome… Note: If you have other browsers running at the same time you can view statistics for them here too. See a list of the Processes currently running… And the Memory & Virtual Memory statistics for those processes. The Difference with the Extensions Disabled Just for fun we decided to disable all of the extension in our test browser… The Task Manager Window is looking rather empty now but the memory consumption has definitely seen an improvement. Comparing Memory Usage for Two Extensions with Similar Functions For our next step we decided to compare the memory usage for two extensions with similar functionality. This can be helpful if you are wanting to keep memory consumption trimmed down as much as possible when deciding between similar extensions. First up was Speed Dial”(see our review here). The stats for Speed Dial…quite a change from what was shown above (~3,000 – 6,000 K). Next up was Incredible StartPage (see our review here). Surprisingly both were nearly identical in the amount of memory being used. Purging Memory Perhaps you like the idea of being able to “purge” some of that excess memory consumption. With a simple command switch modification to Chrome’s shortcut(s) you can add a Purge Memory Button to the Task Manager Window as shown below.  Notice the amount of memory being consumed at the moment… Note: The tutorial for adding the command switch can be found here. One quick click and there is a noticeable drop in memory consumption. Conclusion We hope that our examples here will prove useful to you in managing the memory consumption in your own Google Chrome installation. If you have a computer with limited resources every little bit definitely helps out. Similar Articles Productive Geek Tips Stupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeMonitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersFix for Firefox memory leak on WindowsHow to Purge Memory in Google ChromeHow to Make Google Chrome Your Default Browser TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs

  Read the article

• Organizational characteristics that impact the selection of Development Methodology concepts applied to a project

  Based on my experience, no one really follows a specific methodology exactly as it is formally designed. In fact, the key concepts of a few methodologies are usually combined to form a hybrid methodology for each project based on the current organizational makeup and the project need/requirements to be accomplished. Organizational characteristics that impact the selection of methodology concepts applied to a project. Prior subject knowledge pertaining to a project can be critical when deciding on what methodology or combination of methodologies to apply to a project. For example, if a project is very straight forward, and the development staff has experience in developing  that are similar, then the waterfall method could possibly be the best choice because little to no research is needed  in order to complete the project tasks and there is very little need for changes to occur.  On the other hand, if the development staff has limited subject knowledge or the requirements/specification of the project could possibly change as the project progresses then the use of spiral, iterative, incremental, agile, or any combination would be preferred. The previous methodologies used by an organization typically do not change much from project to project unless the needs of a project dictate differently. For example, if the waterfall method is the preferred development methodology then most projects will be developed by the waterfall method. Depending on the time allotted to a project each day can impact the selection of a development methodology. In one example, if the staff can only devote a few hours a day to a project then the incremental methodology might be ideal because modules can be added to the final project as they are developed. On the other hand, if daily time allocation is not an issue, then a multitude of methodologies could work well for a project. Project characteristics that impact the selection of methodology concepts applied to a project. The type of project being developed can often dictate the type of methodology used for the project. Based on my experience, projects that tend to have a lot of user interaction, follow a more iterative, incremental, or agile approach typically using a prototype that develops into a final project. These methodologies desire back and forth communication between users, clients, and developers to allow for requirements to change and functionality to be enhanced. Conversely, limited interaction applications or automated services can still sometimes get away with using the waterfall or transactional approach. The timeline of a project can also force an organization to prefer a particular methodology over the rest. For instance, if the project must be completed within 24 hours, then there is very little time for discussions back and forth between clients, users and the development team. In this scenario, the waterfall method would be perfect because the only interaction with the client occurs prior to a development project to outline the system requirements, and the development team can quickly move through the software development stages in order to complete the project within the deadline. If the team had more time, then the other methodologies could also be considered because there is more time for client and users to review the project and make changes as they see fit, and/or allow for more time to review the project in order to enhance the business performance and functionality. Sometimes the client and or user involvement can dictate the selection of methodologies applied to a project. One example of this is if a client is highly motivated to get a project completed and desires to play an active part in the development process then the agile development approach would work perfectly with this client because it allows for frequent interaction between clients, users and the development team. The inverse of this situation is a client that just wants to provide the project requirements and only wants to get involved when the project is to be delivered. In this case the waterfall method would work well because there is no room for changes and no back and forth between the users, clients or the development team.

  Read the article

• Can Microsoft Build Appliances?

  - by andrewbrust

  Billy Hollis, my Visual Studio Live! colleague and fellow Microsoft Regional Director said recently, and I am paraphrasing, that the computing world, especially on the consumer side, has shifted from one of building hardware and software that makes things possible to do, to building products and technologies that make things easy to do.  Billy crystalized things perfectly, as he often does. In this new world of “easy to do,” Apple has done very well and Microsoft has struggled.  In the old world, customers wanted a Swiss Army Knife, with the most gimmicks and gadgets possible.  In the new world, people want elegantly cutlery.  They may want cake cutters and utility knives too, but they don’t want one device that works for all three tasks.  People don’t want tools, they want utensils.  People don’t want machines.  They want appliances. Microsoft Appliances: They Do Exist Microsoft has built a few appliance-like devices.  I would say XBox 360 is an appliance,  It’s versatile, mind you, but it’s the kind of thing you plug in, turn on and use, as opposed to set-up, tune, and open up to upgrade the internals.  Windows Phone 7 is an appliance too.  It’s a true smartphone, unlike Windows Mobile which was a handheld computer with a radio stack.  Zune is an appliance too, and a nice one.  It hasn’t attained much traction in the market, but that’s probably because the seminal consumer computing appliance -- the iPod – got there so much more quickly. In the embedded world, Mediaroom, Microsoft’s set-top product for the cable industry (used by AT&T U-Verse and others) is an appliance.  So is Microsoft’s Sync technology, used in Ford automobiles.  Even on the enterprise side, Microsoft has an appliance: SQL Server Parallel Data Warehouse Edition (PDW) combines Microsoft software with select OEMs’ server, networking and storage hardware.  You buy the appliance units from the OEMs, plug them in, connect them and go. I would even say that Bing is an appliance.  Not in the hardware sense, mind you.  But from the software perspective, it’s a single-purpose product that you visit or run, use and then move on.  You don’t have to install it (except the iOS and Android native apps where it’s pretty straightforward), you don’t have to customize it, you don’t have to program it.  Basically, you just use it. Microsoft Appliances that Should Exist But Microsoft builds a bunch of things that are not appliances.  Media Center is not an appliance, and it most certainly should be.  Instead, it’s an app that runs on Windows 7.  It runs full-screen and you can use this configuration to conceal the fact that Windows is under it, but eventually something will cause you to abandon that masquerade (like Patch Tuesday). The next version of Windows Home Server won’t, in my opinion, be an appliance either.  Now that the Drive Extender technology is gone, and users can’t just add and remove drives into and from a single storage pool, the product is much more like a IT server and less like an appliance-premised one.  Much has been written about this decision by Microsoft.  I’ll just sum it up in one word: pity. Microsoft doesn’t have anything remotely appliance-like in the tablet category, either.  Until it does, it likely won’t have much market share in that space either.  And of course, the bulk of Microsoft’s product catalog on the business side is geared to enterprise machines and not personal appliances. Appliance DNA: They Gotta Have It. The consumerization of IT is real, because businesspeople are consumers too.  They appreciate the fit and finish of appliances at home, and they increasingly feel entitled to have it at work too.  Secure and reliable push email in a smartphone is necessary, but it isn’t enough.  People want great apps and a pleasurable user experience too.  The full Microsoft Office product is needed at work, but a PC with a keyboard and mouse, or maybe a touch screen that uses a stylus (or requires really small fingers), to run Office isn’t enough either.  People want a flawless touch experience available for the times they want to read and take quick notes.  Until Microsoft realizes this fully and internalizes it, it will suffer defeats in the consumer market and even setbacks in the business market.  Think about how slow the Office upgrade cycle is…now imagine if the next version of Office had a first-class alternate touch UI and consider the possible acceleration in adoption rates. Can Microsoft make the appliance switch?  Can the appliance mentality become pervasive at the company?  Can Microsoft hasten its release cycles dramatically and shed the “some assembly required” paradigm upon which many of its products are based?  Let’s face it, the chances that Microsoft won’t make this transition are significant. But there are also encouraging signs, and they should not be ignored.  The appliances we have already discussed, especially Xbox, Zune and Windows Phone 7, are the most obvious in this regard.  The fact that SQL Server has an appliance SKU now is a more subtle but perhaps also more significant outcome, because that product sits so smack in the middle of Microsoft’s enterprise stack.  Bing is encouraging too, especially given its integrated travel, maps and augmented reality capabilities.  As Bing gains market share, Microsoft has tangible proof that it can transform and win, even when everyone outside the company, and many within it, would bet otherwise. That Great Big Appliance in the Sky Perhaps the most promising (and evolving) proof points toward the appliance mentality, though, are Microsoft’s cloud offerings -- Azure and BPOS/Office 365.  While the cloud does not represent a physical appliance (quite the opposite in fact) its ability to make acquisition, deployment and use of technology simple for the user is absolutely an embodiment of the appliance mentality and spirit.  Azure is primarily a platform as a service offering; it doesn’t just provide infrastructure.  SQL Azure does likewise for databases.  And Office 365 does likewise for SharePoint, Exchange and Lync. You don’t administer, tune and manage servers; instead, you create databases or site collections or mailboxes and start using them. Upgrades come automatically, and it seems like releases will come more frequently.  Fault tolerance and content distribution is just there.  No muss.  No fuss.  You use these services; you don’t have to set them up and think about them.  That’s how appliances work.  To me, these signs point out that Microsoft has the full capability of transforming itself.  But there’s a lot of work ahead.  Microsoft may say they’re “all in” on the cloud, but the majority of the company is still oriented around its old products and models.  There needs to be a wholesale cultural transformation in Redmond.  It can happen, but product management, program management, the field and executive ranks must unify in the effort. So must partners, and even customers.  New leaders must rise up and Microsoft must be able to see itself as a winner.  If Microsoft does this, it could lock-in decades of new success, and be a standard business school case study for doing so.  If not, the company will have missed an opportunity, and may see its undoing.

  Read the article

• Ubuntu 12.04 - No sound - HELP!

  - by Bruno Tacca

  I'm panicking... my sound stopped working after I tried to set-up my notebook speakers, plus two headphone jacks... My idea was to multichannel the sound to 3 channels, built-in speakers, and sound-card 2 headphone jacks. After a couple efforts I did it with 2 channels, speakers and 1 headphone jack, but the other wasn't working. After more tries and tries, sound stop working. I just want my sound back... crying like a baby on the floor. And, if possible, but not necessary, a simple guide to active the 3 channels. xD I will post the diagnosis according to https://help.ubuntu.com/community/SoundTroubleshootingProcedure STEP 1 Did it, still no sound. STEP 2 Did it, still no sound. STEP 3 and #STEP 4 (I removed the log cause there is a limit of characters to be posted.) The log can be found here: https://answers.launchpad.net/ubuntu/+source/alsa-driver/+question/238653 STEP 5 Rebooted, still no sound. STEP 6 Did it. In the Output Devices tab, nothing is muted. I play a music with the Rhythmbox Music Player, I don't hear anything but in the pavucontrol I can see in the Built-in Audio Analog Stereo a sound bar shaking... but, no sound. STEP 7 In alsamixer, AlsaMixer v1.0.25 Card: HDA Intel PCH Chip: Creative CA0132 information View: F3:[Playback] F4: Capture F5: All Item: Headphone [dB gain: 25.00, 25.00] Then, I have 5 columns Headphone, Speaker, PCM, S/PDIF, S/PDIF Default PCM A little weird when I try to mute the Headphone and the Speaker, here what happens: Starting both unmutted, mutting headphone cause speaker being mutted automaticaly. Starting both unmutted, mutting speaker cause headphone being mutted automaticaly. Starting both mutted, possible to unmute both separately. STEP 8 I cannot hear sound on both (headphone and/or speaker). STEP 9 Dual boot... Restarted, windows was with sound at max volume. Restarted again, still no sound at ubuntu. I heard something when ubuntu started, a little noise, then silence again. The sound icon always start mutted, after unmutting, I have no sound. STEP 10 I dont have this command in my ubuntu. STEP 11 Tried at STEP 8, no sound. There are no problem with jumpers or hardware, cause I have sound working on windows. STEP 12 No way to open my alienware and loss the warranty x.X" STEP 13 I think it's loaded, judging my the logs STEP 14 Alienware M17xR4, the hardware is listed in the logs above, at STEP 4. There are two headphone hacks, one with just an headphone printed above, and the other with an headset (with mic) printed, there is a mic jack too, and a spdif (optical) too. STEP 15 I dont want to enable S/PDIF STEP 16 I never used the HDMI output, yet... Thanks in advance. I hope I listed all the information you need.

  Read the article

• Top 10 Linked Blogs of 2010

  - by Bill Graziano

  Each week I send out a SQL Server newsletter and include links to interesting blog posts.  I’ve linked to over 500 blog posts so far in 2010.  Late last year I started storing those links in a database so I could do a little reporting.  I tend to link to posts related to the OLTP engine.  I also try to link to the individual blogger in the group blogs.  Unfortunately that wasn’t possible for the SQLCAT and CSS blogs.  I also have a real weakness for posts related to PASS. These are the top 10 blogs that I linked to during the year ordered by the number of posts I linked to. Paul Randal – Paul writes extensively on the internals of the relational engine.  Lots of great posts around transactions, transaction log, disaster recovery, corruption, indexes and DBCC.  I also linked to many of his SQL Server myths posts. Glenn Berry – Glenn writes very interesting posts on how hardware affects SQL Server.  I especially like his posts on the various CPU platforms.  These aren’t necessarily topics that I’m searching for but I really enjoy reading them. The SQLCAT Team – This Microsoft team focuses on the largest and most interesting SQL Server installations.  The regularly publish white papers and best practices. SQL Server CSS Team – These are the top engineers from the Microsoft Customer Service and Support group.  These are the folks you finally talk to after your case has been escalated about 20 times.  They write about the interesting problems they find. Brent Ozar – The posts I linked to mostly focused on the relational engine: CPU, NUMA, SSD drives, performance monitoring, etc.  But Brent writes about a real variety of topics including blogging, social networking, speaking, the MCM, SQL Azure and anything else that seems to strike his fancy.  His posts are always well written and though provoking. Jeremiah Peschka – A number of Jeremiah’s posts weren’t about SQL Server.  He’s very active in the “NoSQL” area and I linked to a number of those posts.  I think it’s important for people to know what other technologies are out there. Brad McGehee – Brad writes about being a DBA including maintenance plans, DBA checklists, compression and audit. Thomas LaRock – I linked to a variety of posts from PBM to networking to 24 Hours of PASS to TDE.  Just a real variety of topics.  Tom always writes with an interesting style usually mixing in a movie theme and/or bacon. Aaron Bertrand – Many of my links this year were Denali features.  He also had a great series on bad habits to kick. Michael J. Swart – This last one surprised me.  There are some well known SQL Server bloggers below Michael on this list.  I linked to posts on indexes, hierarchies, transactions and I/O performance and a variety of other engine related posts.  All are interesting and well thought out.  Many of his non-SQL posts are also very good.  He seems to have an interest in puzzles and other brain teasers.  Michael, I won’t be surprised again!

  Read the article

• Evaluating Oracle Data Mining Has Never Been Easier - Evaluation "Kit" Available

  - by chberger

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Now you can quickly and easily get set up to starting using Oracle Data Mining for evaluation purposes. Just go to the Oracle Technology Network (OTN) and follow these simple steps. Oracle Data Mining Evaluation "Kit" Instructions Step 1: Download and Install the Oracle Database 11g Release 2 Anyone can download and install the Oracle Database for free for evaluation purposes. Read OTN web site for details. 11.2.0.1.0 DB is the minimum, 11.2.0.2 is better and naturally 11.2.0.3 is best if you are a current customer and on active support. Either 32-bit or 64-bit is fine. 4GB of RAM or more works fine for SQL Developer and the Oracle Data Miner GUI extension. Downloading the database and installing it should take just about an hour or so, depending on your network and computer. For more instructions on setting up Oracle Data Mining see: http://www.oracle.com/technetwork/database/options/odm/dataminerworkflow-168677.html When you install the Oracle Database, the Sample Examples data should also be installed e.g.:Release 2 Examples win32_11gR2_examples.zip (565,154,740 bytes). Contains examples of how to use the Oracle Database. Download if you are new to Oracle and want to try some of the examples presented in the Documentation Step 2: Install SQL Developer 3.1 (the Oracle Data Mining Extension installs automatically) Step 3. Follow the four free step-by-step Oracle-by-Examples e-training lessons: Setting Up Oracle Data Miner 11g Release 2 This tutorial covers the process of setting up Oracle Data Miner 11g Release 2 for use within Oracle SQL Developer 3.0. Using Oracle Data Miner 11g Release 2 This tutorial covers the use of Oracle Data Miner to perform data mining against Oracle Database 11g Release 2. In this lesson, you examine and solve a data mining business problem by using the Oracle Data Miner graphical user interface (GUI). Star Schema Mining Using Oracle Data Miner This tutorial covers the use of Oracle Data Miner to perform star schema mining against Oracle Database 11g Release 2. Text Mining Using Oracle Data Miner This tutorial covers the use of Oracle Data Miner to perform text mining against Oracle Database 11g Release 2. That’s it! Easy, fun and the fastest way to get started evaluating Oracle Data Mining. Enjoy! Charlie

  Read the article

• The Birth of a Method - Where did OUM come from?

  - by user702549

  It seemed fitting to start this blog entry with the OUM vision statement. The vision for the Oracle® Unified Method (OUM) is to support the entire Enterprise IT lifecycle, including support for the successful implementation of every Oracle product.  Well, it’s that time of year again; we just finished testing and packaging OUM 5.6.  It will be released for general availability to qualifying customers and partners this month.  Because of this, I’ve been reflecting back on how the birth of Oracle’s Unified method - OUM came about. As the Release Director of OUM, I’ve been honored to package every method release.  No, maybe you’d say it’s not so special.  Of course, anyone can use packaging software to create an .exe file.  But to me, it is pretty special, because so many people work together to make each release come about.  The rich content that results is what makes OUM’s history worth talking about.   To me, professionally speaking, working on OUM, well it’s been “a labor of love”.  My youngest child was just 8 years old when OUM was born, and she’s now in High School!  Watching her grow and change has been fascinating, if you ask her, she’s grown up hearing about OUM.  My son would often walk into my home office and ask “How is OUM today, Mom?”  I am one of many people that take care of OUM, and have watched the method “mature” over these last 6 years.  Maybe that makes me a "Method Mom" (someone in one of my classes last year actually said this outloud) but there are so many others who collaborate and care about OUM Development. I’ve thought about writing this blog entry for a long time just to reflect on how far the Method has come. Each release, as I prepare the OUM Contributors list, I see how many people’s experience and ideas it has taken to create this wealth of knowledge, process and task guidance as well as templates and examples.  If you’re wondering how many people, just go into OUM select the resources button on the top of most pages of the method, and on that resources page click the ABOUT link. So now back to my nostalgic moment as I finished release 5.6 packaging.  I reflected back, on all the things that happened that cause OUM to become not just a dream but to actually come to fruition.  Here are some key conditions that make it possible for each release of the method: A vision to have one method instead of many methods, thereby focusing on deeper, richer content People within Oracle’s consulting Organization  willing to contribute to OUM providing Subject Matter Experts who are willing to write down and share what they know. Oracle’s continued acquisition of software companies, the need to assimilate high quality existing materials from these companies The need to bring together people from very different backgrounds and provide a common language to support Oracle Product implementations that often involve multiple product families What came first, and then what was the strategy? Initially OUM 4.0 was based on Oracle’s J2EE Custom Development Method (JCDM), it was a good “backbone”  (work breakdown structure) it was Unified Process based, and had good content around UML as well as custom software development.  But it needed to be extended in order to achieve the OUM Vision. What happened after that was to take in the “best of the best”, the legacy and acquired methods were scheduled for assimilation into OUM, one release after another.  We incrementally built OUM.  We didn’t want to lose any of the expertise that was reflected in AIM (Oracle’s legacy Application Implementation Method), Compass (People Soft’s Application implementation method) and so many more. When was OUM born? OUM 4.1 published April 30, 2006.  This release allowed Oracles Advanced Technology groups to begin the very first implementations of Fusion Middleware.  In the early days of the Method we would prepare several releases a year.  Our iterative release development cycle began and continues to be refined with each Method release.  Now we typically see one major release each year. The OUM release development cycle is not unlike many Oracle Implementation projects in that we need to gather requirements, prioritize, prepare the content, test package and then go production.  Typically we develop an OUM release MoSCoW (must have, should have, could have, and won’t have) right after the prior release goes out.   These are the high level requirements.  We break the timeframe into increments, frequent checkpoints that help us assess the content and progress is measured through frequent checkpoints.  We work as a team to prioritize what should be done in each increment. Yes, the team provides the estimates for what can be done within a particular increment.  We sometimes have Method Development workshops (physically or virtually) to accelerate content development on a particular subject area, that is where the best content results. As the written content nears the final stages, it goes through edit and evaluation through peer reviews, and then moves into the release staging environment.  Then content freeze and testing of the method pack take place.  This iterative cycle is run using the OUM artifacts that make sense “fit for purpose”, project plans, MoSCoW lists, Test plans are just a few of the OUM work products we use on a Method Release project. In 2007 OUM 4.3, 4.4 and 4.5 were published.  With the release of 4.5 our Custom BI Method (Data Warehouse Method FastTrack) was assimilated into OUM.  These early releases helped us align Oracle’s Unified method with other industry standards Then in 2008 we made significant changes to the OUM “Backbone” to support Applications Implementation projects with that went to the OUM 5.0 release.  Now things started to get really interesting.  Next we had some major developments in the Envision focus area in the area of Enterprise Architecture.  We acquired some really great content from the former BEA, Liquid Enterprise Method (LEM) along with some SMEs who were willing to work at bringing this content into OUM.  The Service Oriented Architecture content in OUM is extensive and can help support the successful implementation of Fusion Middleware, as well as Fusion Applications. Of course we’ve developed a wealth of OUM training materials that work also helps to improve the method content.  It is one thing to write “how to”, and quite another to be able to teach people how to use the materials to improve the success of their projects.  I’ve learned so much by teaching people how to use OUM. What's next? So here toward the end of 2012, what’s in store in OUM 5.6, well, I’m sure you won’t be surprised the answer is Cloud Computing.   More details to come in the next couple of weeks!  The best part of being involved in the development of OUM is to see how many people have “adopted” OUM over these six years, Clients, Partners, and Oracle Consultants.  The content just gets better with each release.   I’d love to hear your comments on how OUM has evolved, and ideas for new content you’d like to see in the upcoming releases.

  Read the article

• Oracle WebLogic Server and Oracle Database: A Robust Infrastructure for your Applications

  - by Ruma Sanyal

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 It has been said that a chain is as strong as its weakest link. Well, this is also true for your application infrastructure. Not only are the various components that constitute your infrastructure, like database and application server critical, the integration between these things [whether coming out of the box from your vendor or done in-house] is paramount. Imagine your database being down and your application server not knowing about it and as a result your application waiting indefinitely for a database response – not a great situation if high availability is critical to your application. Or one of your database nodes is very busy, but your application server doesn’t have the intelligence to decipher that – it keeps pinging the busy node when it can in fact get a response from another idle node much faster. This is what Oracle WebLogic and Database integration provides: Intelligent integration out of the box. Tight integration between Oracle WebLogic and Database makes your infrastructure robust enough that not only does each of your infrastructure component provide you with improved RASP [reliability availability, scalability, and performance] but these components work together to offer improved performance & availability, better resource sharing, inherent scalability, ease of configuration and automated management for your entire infrastructure. Oracle WebLogic Server is the only application server with this degree of integration to Oracle Database. With Oracle WebLogic Server 11g, we introduced Active GridLink for Real Application Clusters (RAC). In conjunction with Oracle Database, this powerful software technology simplifies management, increases availability, and ensures fast connection failover with runtime connection, load balancing and affinity capabilities. With the release of Oracle Database 12c this summer, even tighter integration between Oracle WebLogic Server 12c (12.1.2) and Oracle Database 12c has been achieved and this further optimizes the integration for a global cloud environment. Read about these capabilities in detail in the Oracle WebLogic-Database Integration Whitepaper. Get in depth ‘how-to’ details from this YouTube video on the topic from our resident expert, Monica Roccelli. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Pull Request Changes, Multi-Selection in Advanced View, and Advertisement Changes

  [Do you tweet? Follow us on Twitter @matthawley and @adacole_msft] We deployed a new version of the CodePlex website today. Pull Request Changes In this release, we have begun to re-focus on Pull Requests to ensure a productive experience between the project users and developers. We feel we made significant progress in this area for this release and look forward to using your feedback to drive future iterations. One of the biggest hurdles people have indicated is the inability to see what a pull request includes without pulling the source down from a Mercurial client. With today’s changes, any user has the ability to view a pull request, the changesets / changes included, and perform an inline diff of the file. When a pull request is made, the CodePlex website will query for all outgoing changes from the fork to the main repository for a point-in-time comparison. Because of this point-in-time comparison… All existing pull requests created prior to this release will not have changesets associated with them. If new commits are pushed to the fork while a pull request is active, they will not appear associated with the pull request. The pull request will need to be re-submitted for them to appear. Once a pull request is created, you can “View the Pull Request” which takes you to a page that looks like As you may notice, we now display a lot more detailed information regarding that pull request including who it was requested by and when, the associated changesets, the description, who it’s assigned to (we’ll come back to this) and the listing of summarized file changes. What you’ll also notice, is that each modified file has the ability to view a diff of all changes made. When you click “(view diff)” for a file, an inline diff experience appears. This new experience allows you to quickly navigate through all of the modified files as well as viewing the various change blocks for each file. You’ll also notice as you browse through each file’s changes, we update the URL to include the file path so you can quickly send a direct link to a pull request’s file. Clicking “(close diff)” will bring you back to the original pull request view. View this pull request live on WikiPlex. Pull Request Review Assignment Another new feature we added for pull requests is the ability for project members to assign pull requests for review. Any project member has the ability to assign (and re-assign if needed) a pull request to a project member. Once the assignment has been made, that project member will be notified via email of the assignment. Once they complete the review of the pull request, they can either accept or deny it similarly to the previous process. Multi-Selection in Advanced View Filters One of the more recent requests we have heard from users is the ability multi-select advanced view filters for work items. We are happy to announce this is now possible. Simply control-click the multiple options for each filter item and your work item query will be refined as such. Should you happen to unselect all options for a given filter, it will automatically reset to the default option for that filter. Furthermore, the “Direct Link” URL will be updated to include the multi-selected options for each filter. Note: The “Direct Link” feature was released in our previous deployment, just never written about. It allows you to capture the current state of your query and send it to other individuals. Advertisement Changes Very recently, the advertiser (The Lounge) we partnered to provide advertising revenue for projects, or donated to charity, was acquired by Lake Quincy Media. There has been no change in the advertising platform offering, and all projects have been converted over to using the new infrastructure. Project owners should note the new contact information for getting paid. The CodePlex team values your feedback, and is frequently monitoring Twitter, our Discussions and Issue Tracker for new features or problems. If you’ve not visited the Issue Tracker recently, please take a few moments to log an idea or vote for the features you would most like to see implemented on CodePlex.

  Read the article

• Professional Developers, may I join you?

  - by Ben

  I currently work in technical support for a software/hardware company and for the most part it's a good job, but it's feeling more and more like I'm getting 'stuck' here. No raises in the 5 years I've been here, and lately there seems to be more hiring from the outside than promotion from within. The work I do is more technical than end-user support, as we deal primarily with our field technicians who have a little more technical skill than the general user base. As a result I get into much more technical support issues... often tracking down bugs in our software, finding performance bottlenecks in our database schema, etc. The work I'm most proud of are the development projects I've come up with on my own, and worked on during lunch breaks and slow periods in Support. Over the years I've written a number of useful utilities for the company. Diagnostic type applications that several departments use and appreciate. These include apps that simulate our various hardware devices, log file analysis, time-saving utilities for our work processes, etc. My best projects have been the hardware simulation programs, which are the type of thing we probably wouldn't have put a full-time developer on had anyone thought to do it, but they've ended up being popular and useful enough to be used by development, QA, R&D, and Support. They allow us to interface our software with simulated hardware, rather than clutter up our work areas with bulky, hard to acquire equipment. Since starting here my life has moved forward (married, kid, one more on the way), but it feels like my career has not. I still earn what I earned walking in the door my first day. Company budget is tight, bonuses have gone down, and no raises or cost of living / inflation adjustments either. As the sole source of income for my family I feel I need to do more, and I'd like to have a more active role in creating something at work, not just cleaning up other people's mistakes. I enjoy technical work, and I think development is the next logical step in my career. I'd like to bring some "legitimacy" to my part-time development work, and make myself a more skilled and valuable employee. Ultimately if this can help me better support my family, that would be ideal. Can I make the jump to professional developer? I have an engineering degree, but no formal education in computer science. I write WinForms apps using the .NET framework, do some freelance web development, have volunteered to write software for a nonprofit, and have started experimenting with programming microcontrollers. I enjoy learning new things in the limited free time I have available. I think I have the aptitude to take on a development role, even in an 'apprentice' capacity if such an option is possible. Have any of you moved into development like this? Do any of you developers have any advice or cautionary tales? Are there better career options I haven't thought of? I welcome any and all related comments and thank you in advance for posting them.

  Read the article

• 13 Things From the Oracle Social Summit You Should Know

  - by Mike Stiles

  Oracle held its first annual Oracle Social Summit, “The School for the Socially Gifted,” this past week in Las Vegas.  If anyone came to the event uncertain as to why Oracle has such an interest in social, and what its plans for social are, they left with an entirely new vision of where social is headed, and why.For those unable to attend, I was able to keep my MacBook charged just long enough to capture some of the more pertinent takeaways.1. The social enterprise is inevitable.  Social technology is disrupting the hierarchies of big companies.  It’s a revolution in corporate structures, just as it has been in various governments.  It’s not crazy to ask yourself if your CEO is the next Mubarak.  (David Kilpatrick Author of “The Facebook Effect” and founder of the Techonomy Conference) 2. The social enterprise represents collaboration on steroids.  It’s tapping into the power of your people, as opposed to keeping them “in their place.”  3. 1 in every 7 humans on earth is an active Facebook user.  75% have posted a negative comment after a poor customer experience.  The average user will inform 53 people of a bad experience.4. Checking social media is the 2nd biggest use of phones now.  Reading posts from brands is 4th.5. 70% of marketers have little or no understanding of the social conversations happening around their brand.6. Advertising, when done well, is content we care about, preferably informed by those we trust.7. Acquiring low-quality fans through gimmicks, or focusing purely on fan acquisition is a mistake.  And relying purely on organic distribution is a mistake.  (John Yi, Head of Marketing Partnerships – Facebook)8. Using all this newfound data and insight serves to positively affect the customer experience.  It allows organizations to now leverage the investments they’ve made in social up to now.9. Social is not a marketing utopia where everything is free.  It’s pay to play.  The paid component is about driving attention.  10. We are only in the infancy of ad-targeting opportunities in social.  There’s an evolution underway from interest-based targeting to action-based targeting.11. There’s actually very little overlap of the people following you on different social platforms.  Don’t assume it’s the same audience on each.12. People who can create content and who also have an understanding of what drives that content are growing increasingly valuable.13. Oracle Social’s future is enterprise SRM, integrated across marketing, selling, service, HR and every other corner of the organization.And in case you thought those were the only gems to come out of the summit, you may want to keep an eye out for Tuesday’s Social Spotlight, ever so aptly titled “13 More Things from the Oracle Social Summit You Should Know.”

  Read the article

• SQLAuthority News – Stay Connected and Social Media

  - by pinaldave

  I think I have finally gotten back my faith in social media. If you are following my blog I am sure you are aware of my views on social media – SQLAuthority News – Social Media Confusion – Twitter, FaceBook, LinkedIn and Me. I was not happy about how social media was evolving. Whenever I go to Twitter, LinkedIn or Facebook, I noticed the same updates everywhere. I just thought I was wasting my time doing the same thing everywhere. I strongly believe that there is no dictator on internet. Nobody has authority over others, everybody can express their ideas as long as it is not violating others privacy and it is not morally wrong. I have decided that instead of trying to improve the world, I should change myself and adjust my needs. Here are few things I have done to relieve my social media confusion. Twitter I un-followed people who were taking up my time with too many updates. I un-followed people who hardly updated at all. I did not follow anybody else’s list, as I have no control over who other people follow. I follow not only serious SQL people but some fun stuff as well. I removed all my friends who were on Facebook and repeating the same updates on Twitter. I engage with them on Facebook. I followed people who are very conversational on Twitter. I let anybody follow me. I update all my blog posts through at least five tweets online. I decided to re-tweet at least five of my favorite tweets of the day, this way I force myself to remain active in the community. Follow me on Twitter! LinkedIn I updated my career and professional info on LinkedIn. I keep my LinkedIn profile updated with my latest jobs and career news. I let anybody connect with me on LinkedIn. I specify my email address in my profile, keeping it easy for those who want to add me. I read all the profile related updates of my connections – it is very valuable to know who is where and what changes are happening. I do not add my personal tweets or comments in LinkedIn profile. I just keep it professional. Link with me at LinkedIn Facebook I use Facebook only for personal friends. I visit all of my friends at regular intervals and make sure that they are really my friends. I often remove my friends from my Twitter list who are sending duplicate updates. I upload my family photos as well as family updates on Facebook, making sure that only my approved friends are able to read my updates. I keep my Facebook very personal and I often chat with my friends on Facebook chat. I am no longer confused about social media and I think I am using it appropriately. As I said, one cannot decide for others how to use social media, you can only decide for yourself. I have finally found my peace with social media. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Developing Mobile Applications: Web, Native, or Hybrid?

  - by Michelle Kimihira

  Authors: Joe Huang, Senior Principal Product Manager, Oracle Mobile Application Development Framework  and Carlos Chang, Senior Principal Product Director The proliferation of mobile devices and platforms represents a game-changing technology shift on a number of levels. Companies must decide not only the best strategic use of mobile platforms, but also how to most efficiently implement them. Inevitably, this conversation devolves to the developers, who face the task of developing and supporting mobile applications—not a simple task in light of the number of devices and platforms. Essentially, developers can choose from the following three different application approaches, each with its own set of pros and cons. Native Applications: This refers to apps built for and installed on a specific platform, such as iOS or Android, using a platform-specific software development kit (SDK).  For example, apps for Apple’s iPhone and iPad are designed to run specifically on iOS and are written in Xcode/Objective-C. Android has its own variation of Java, Windows uses C#, and so on.  Native apps written for one platform cannot be deployed on another. Native apps offer fast performance and access to native-device services but require additional resources to develop and maintain each platform, which can be expensive and time consuming. Mobile Web Applications: Unlike native apps, mobile web apps are not installed on the device; rather, they are accessed via a Web browser.  These are server-side applications that render HTML, typically adjusting the design depending on the type of device making the request.  There are no program coding constraints for writing server-side apps—they can be written in Java, C, PHP, etc., it doesn’t matter.  Instead, the server detects what type of mobile browser is pinging the server and adjusts accordingly. For example, it can deliver fully JavaScript and CSS-enabled content to smartphone browsers, while downgrading gracefully to basic HTML for feature phone browsers. Mobile apps work across platforms, but are limited to what you can do through a browser and require Internet connectivity. For certain types of applications, these constraints may not be an issue. Oracle supports mobile web applications via ADF Faces (for tablets) and ADF Mobile browser (Trinidad) for smartphone and feature phones. Hybrid Applications: As the name implies, hybrid apps combine technologies from native and mobile Web apps to gain the benefits each. For example, these apps are installed on a device, like their pure native app counterparts, while the user interface (UI) is based on HTML5.  This UI runs locally within the native container, which usually leverages the device’s browser engine.  The advantage of using HTML5 is a consistent, cross-platform UI that works well on most devices.  Combining this with the native container, which is installed on-device, provides mobile users with access to local device services, such as camera, GPS, and local device storage.  Native apps may offer greater flexibility in integrating with device native services.  However, since hybrid applications already provide device integrations that typical enterprise applications need, this is typically less of an issue.  The new Oracle ADF Mobile release is an HTML5 and Java hybrid framework that targets mobile app development to iOS and Android from one code base. So, Which is the Best Approach? The short answer is – the best choice depends on the type of application you are developing.  For instance, animation-intensive apps such as games would favor native apps, while hybrid applications may be better suited for enterprise mobile apps because they provide multi-platform support. Just for starters, the following issues must be considered when choosing a development path. Application Complexity: How complex is the application? A quick app that accesses a database or Web service for some data to display?  You can keep it simple, and a mobile Web app may suffice. However, for a mobile/field worker type of applications that supports mission critical functionality, hybrid or native applications are typically needed. Richness of User Interactivity: What type of user experience is required for the application?  Mobile browser-based app that’s optimized for mobile UI may suffice for quick lookup or productivity type of applications.  However, hybrid/native application would typically be required to deliver highly interactive user experiences needed for field-worker type of applications.  For example, interactive BI charts/graphs, maps, voice/email integration, etc.  In the most extreme case like gaming applications, native applications may be necessary to deliver the highly animated and graphically intensive user experience. Performance: What type of performance is required by the application functionality?  For instance, for real-time look up of data over the network, mobile app performance depends on network latency and server infrastructure capabilities.  If consistent performance is required, data would typically need to be cached, which is supported on hybrid or native applications only. Connectivity and Availability: What sort of connectivity will your application require? Does the app require Web access all the time in order to always retrieve the latest data from the server? Or do the requirements dictate offline support? While native and hybrid apps can be built to operate offline, Web mobile apps require Web connectivity. Multi-platform Requirements: The terms “consumerization of IT” and BYOD (bring your own device) effectively mean that the line between the consumer and the enterprise devices have become blurred. Employees are bringing their personal mobile devices to work and are often expecting that they work in the corporate network and access back-office applications.  Even if companies restrict access to the big dogs: (iPad, iPhone, Android phones and tablets, possibly Windows Phone and tablets), trying to support each platform natively will require increasing resources and domain expertise with each new language/platform. And let’s not forget the maintenance costs, involved in upgrading new versions of each platform.   Where multi-platform support is needed, Web mobile or hybrid apps probably have the advantage. Going native, and trying to support multiple operating systems may be cost prohibitive with existing resources and developer skills. Device-Services Access:  If your app needs to access local device services, such as the camera, contacts app, accelerometer, etc., then your choices are limited to native or hybrid applications.   Fragmentation: Apple controls Apple iOS and the only concern is what version iOS is running on any given device.   Not so Android, which is open source. There are many, many versions and variants of Android running on different devices, which can be a nightmare for app developers trying to support different devices running different flavors of Android.  (Is it an Amazon Kindle Fire? a Samsung Galaxy?  A Barnes & Noble Nook?) This is a nightmare scenario for native apps—on the other hand, a mobile Web or hybrid app, when properly designed, can shield you from these complexities because they are based on common frameworks.  Resources: How many developers can you dedicate to building and supporting mobile application development?  What are their existing skills sets?  If you’re considering native application development due to the complexity of the application under development, factor the costs of becoming proficient on a each platform’s OS and programming language. Add another platform, and that’s another language, another SDK. On the other side of the equation, Web mobile or hybrid applications are simpler to make, and readily support more platforms, but there may be performance trade-offs. Conclusion This only scratches the surface. However, I hope to have suggested some food for thought in choosing your mobile development strategy.  Do your due diligence, search the Web, read up on mobile, talk to peers, attend events. The development team at Oracle is working hard on mobile technologies to help customers extend enterprise applications to mobile faster and effectively.  To learn more on what Oracle has to offer, check out the Oracle ADF Mobile (hybrid) and ADF Faces/ADF Mobile browser (Web Mobile) solutions from Oracle.   Additional Information Blog: ADF Blog Product Information on OTN: ADF Mobile Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

  Read the article

• Can't connect to VPN on Ubuntu 12.04

  - by 12rad

  I'm having a lot of trouble connecting to VPN. This used to work on my machine, but i recently did an update and it's stopped working. I'm not sure what the problem is. My question is how do i debug this? I'm not able to narrow it down to a specific problem. This is what i get when i tail the syslogs. Would appreciate any help! Nov 6 23:42:52 meera NetworkManager[1137]: <info> Starting VPN service 'pptp'... Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 6132 Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN service 'pptp' appeared; activating connections Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN plugin state changed: starting (3) Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN connection 'NAME VPN' (Connect) reply received. Nov 6 23:42:52 meera pppd[6136]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. Nov 6 23:42:52 meera pppd[6136]: pppd 2.4.5 started by root, uid 0 Nov 6 23:42:52 meera chat[6139]: timeout set to 15 seconds Nov 6 23:42:52 meera chat[6139]: abort on (NO CARRIER) Nov 6 23:42:52 meera chat[6139]: abort on (NO DIALTONE) Nov 6 23:42:52 meera chat[6139]: abort on (ERROR) Nov 6 23:42:52 meera chat[6139]: abort on (NO ANSWER) Nov 6 23:42:52 meera chat[6139]: abort on (BUSY) Nov 6 23:42:52 meera chat[6139]: abort on (Username/Password Incorrect) Nov 6 23:42:52 meera chat[6139]: send (AT^M) Nov 6 23:42:52 meera pptp[6138]: nm-pptp-service-6132 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Nov 6 23:42:52 meera chat[6139]: expect (OK) Nov 6 23:42:52 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' Nov 6 23:42:53 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply Nov 6 23:42:53 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established. Nov 6 23:42:53 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' Nov 6 23:42:54 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. Nov 6 23:42:54 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 13077). Nov 6 23:42:54 meera pptp[6138]: nm-pptp-service-6132 warn[decaps_hdlc:pptp_gre.c:231]: The ppp mode is synchronous, yet no pptp --sync option is specified! Nov 6 23:43:07 meera chat[6139]: alarm Nov 6 23:43:07 meera chat[6139]: Failed Nov 6 23:43:07 meera pppd[6136]: Script chat -v -f /etc/ppp/chat-ztisp finished (pid 6139), status = 0x3 Nov 6 23:43:07 meera pppd[6136]: Connect script failed Nov 6 23:43:07 meera pppd[6136]: Waiting for 1 child processes... Nov 6 23:43:07 meera pppd[6136]: script /usr/sbin/pptp 204.197.218.90 --nolaunchpppd --loglevel 0 --logstring nm-pptp-service-6132, pid 6138 Nov 6 23:43:07 meera pptp[6138]: nm-pptp-service-6132 warn[decaps_hdlc:pptp_gre.c:204]: short read (-1): Input/output error Nov 6 23:43:07 meera pptp[6138]: nm-pptp-service-6132 warn[decaps_hdlc:pptp_gre.c:216]: pppd may have shutdown, see pppd log Nov 6 23:43:07 meera pptp[6143]: nm-pptp-service-6132 log[callmgr_main:pptp_callmgr.c:234]: Closing connection (unhandled) Nov 6 23:43:07 meera pppd[6136]: Script /usr/sbin/pptp 204.197.218.90 --nolaunchpppd --loglevel 0 --logstring nm-pptp-service-6132 finished (pid 6138), status = 0x0 Nov 6 23:43:07 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' Nov 6 23:43:07 meera pptp[6143]: nm-pptp-service-6132 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state) Nov 6 23:43:07 meera pppd[6136]: Exit. Nov 6 23:43:07 meera NetworkManager[1137]: <warn> VPN plugin failed: 1 Nov 6 23:43:07 meera NetworkManager[1137]: <info> VPN plugin state changed: stopped (6) Nov 6 23:43:07 meera NetworkManager[1137]: <info> VPN plugin state change reason: 0 Nov 6 23:43:07 meera NetworkManager[1137]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active.

  Read the article

• Windows Azure Recipe: Social Web / Big Media

  - by Clint Edmonson

  With the rise of social media there’s been an explosion of special interest media web sites on the web. From athletics to board games to funny animal behaviors, you can bet there’s a group of people somewhere on the web talking about it. Social media sites allow us to interact, share experiences, and bond with like minded enthusiasts around the globe. And through the power of software, we can follow trends in these unique domains in real time. Drivers Reach Scalability Media hosting Global distribution Solution Here’s a sketch of how a social media application might be built out on Windows Azure: Ingredients Traffic Manager (optional) – can be used to provide hosting and load balancing across different instances and/or data centers. Perfect if the solution needs to be delivered to different cultures or regions around the world. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model has extensibility points to hook into other identity providers as well. Web Role – hosts the core of the web application and presents a central social hub users. Database – used to store core operational, functional, and workflow data for the solution’s web services. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Tables (optional) – for semi-structured data streams that don’t need relational integrity such as conversations, comments, or activity streams, tables provide a faster and more flexible way to store this kind of historical data. Blobs (optional) – users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Content Delivery Network (CDN) (optional) – for sites that service users around the globe, the CDN is an extension to blob storage that, when enabled, will automatically cache frequently accessed blobs and static site content at edge data centers around the world. The data can be delivered statically or streamed in the case of rich media content. Training These links point to online Windows Azure training labs and resources where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• Get Your Enterprise Working With Oracle On Track Communication 1.0

  - by Josh Lannin

  The On Track Development team is very pleased to announce that today On Track is available for our customers to download and evaluate.  To learn more about what On Track does start with our whitepaper and datasheet.   If you are a developer, take a look at our documentation and samples posted to our OTN page. For this first blog post, I’ll be speaking to several notable points about our product. Graceful Escalation via Conversations: On Track addresses the “Collaboration Problem” through a single guiding principle – graceful escalation – within the construct of a Conversation. In On Track, collaboration is based on a context (called a “Conversation”) that gracefully escalates in form, structure, and content, as dictated by the particular needs of a given collaboration.  Within that context, On Track provides a rich set of tools to choose from.  These tools provide for communication, coordination, content management, organization, decision making, and analysis -- all essential aspects of collaboration, but not all of them are essential all of the time.  Every collaborative interaction will evolve differently.  Some will evolve to represent work spreading over the course of years and involving a large, distributed team, while others may involve few people and not evolve at all.  Regardless, all collaborative contexts are built from the same parts, utilize the same concepts, and start the same way.  The principle of graceful escalation is that you only use the tools and structure you need; so you only incur the complexity you need. Purposeful Collaboration: Through application integration, On Track Conversations bring enterprise application users the communication and collaboration capabilities required to complete business process.  By association with specific processes or business objects conversations extend the possible interactions and broaden participation to internal or external non-application users and provide a sophisticated interaction experience, all the while enhancing the data set within the owning application.  Purposeful collaboration not only needs to happen in the context of applications, it must support a full range of real-time and long-running interactions to provide the greatest value. Multi Client, Multi Modal: This On Track 1.0 product release includes the same day availability of  multiple clients, including iPhone and iPad applications which are now available on the Apple Store, a fully capable and accessible Outlook Add-In, along with our browser web client.  With each client we have sought to leverage the strengths of each unique device- our iPhone client supports picture and voice posts, the iPad is optimized for meeting room situations and document viewing, and our Outlook add-in allows you to take emails in context and bring them into On Track.  In addition to supporting a diverse array of clients, On Track provides a unified multi modal experience support starting with basic messages moving through to integrated documents with live annotations, snapshots, application sharing, and voice. Next Generation Web Architecture: We believe On Track will help move the bar higher for what users can expect from all web applications, most notably ones that involve real-time activity.  On Track is built from the ground up with an innovative, real-time architecture that leverages the extensive push capabilities of our server.  Whether you are receiving a new message, viewing where crowds of people are collaborating, or doing live annotation on a document with a set of people, that information comes to you immediately without refreshes or moving back and forth between pages.  We’ve leveraged this core architecture across the product experience and raised the user experience bar for this type of application.  As well these capabilities are based on open standards and protocols, and are fully extensible by anyone- enabling sophisticated integrations to be created with a wide variety of both legacy and next-generation applications. Agile Product Development: As a product team we operate using continuous feedback and modified agile development methodologies.  We have thousands of active internal Oracle users who have helped pilot our product for critical business functions, and the On Track product development team uses our product as our primary vehicle for all our collaboration.  Additionally we been working with early access customers who are adopting our technology and providing us valuable feedback - which our process has rapidly realized in improvements to our software.  On Track agility extends to our server as well, which is built to scale, and is very simple to install and configure. We are pleased to make this product announcement and encourage you to join us on Facebook or follow us on Twitter, as well as checking back here for the latest product information.

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >