Search Results

Search found 7127 results on 286 pages for 'calculated columns'.

Page 269/286 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

  • Simple database design and LINQ

    - by Anders Svensson
    I have very little experience designing databases, and now I want to create a very simple database that does the same thing I have previously had in xml. Here's the xml: <services> <service type="writing"> <small>125</small> <medium>100</medium> <large>60</large> <xlarge>30</xlarge> </service> <service type="analysis"> <small>56</small> <medium>104</medium> <large>200</large> <xlarge>250</xlarge> </service> </services> Now, I wanted to create the same thing in a SQL database, and started doing this ( hope this formats ok, but you'll get the gist, four columns and two rows): > ServiceType Small Medium Large > > Writing 125 100 60 > > Analysis 56 104 200 This didn't work too well, since I then wanted to use LINQ to select, say, the Large value for Writing (60). But I couldn't use LINQ for this (as far as I know) and use a variable for the size (see parameters in the method below). I could only do that if I had a column like "Size" where Small, Medium, and Large would be the values. But that doesn't feel right either, because then I would get several rows with ServiceType = Writing (3 in this case, one for each size), and the same for Analysis. And if I were to add more servicetypes I would have to do the same. Simply repetitive... Is there any smart way to do this using relationships or something? Using the second design above (although not good), I could use the following LINQ to select a value with parameters sent to the method: protected int GetHourRateDB(string serviceType, Size size) { CalculatorLinqDataContext context = new CalculatorLinqDataContext(); var data = (from calculatorData in context.CalculatorDatas where calculatorData.Service == serviceType && calculatorData.Size == size.ToString() select calculatorData).Single(); return data.Hours; } But if there is another better design, could you please also describe how to do the same selection using LINQ with that design? Please keep in mind that I am a rookie at database design, so please be as explicit and pedagogical as possible :-) Thanks! Anders

    Read the article

  • Writing csv files with python with exact formatting parameters

    - by Ben Harrison
    I'm having trouble with processing some csv data files for a project. The project's programmer has moved onto greener pastures, and now I'm trying to finish the data analysis up (I did/do the statistical analysis.) The programmer suggested using python/csv reader to help break down the files, which I've had some success with, but not in a way I can use. This code is a little different from what I was trying before. I am essentially attempting to create an array. In the raw data format, the first 7 rows contain no data, and then each column contains 50 experiments, each with 4000 rows, for 200000 some rows total. What I want to do is take each column, and make it an individual csv file, with each experiment in its own column. So it would be an array of 50 columns and 4000 rows for each data type. The code here does break down the correct values, I think the logic is okay, but it is breaking down the opposite of how I want it. I want the separators without quotes (the commas and spaces) and I want the element values in quotes. Right now it is doing just the opposite for both, element values with no quotes, and the separators in quotes. I've spent several hours trying to figure out how to do this to no avail, import csv ifile = open('00_follow_maverick.csv') epistemicfile = open('00_follower_maverick_EP.csv', 'w') reader = csv.reader(ifile) colnum = 0 rownum = 0 y = 0 z = 8 for column in reader: rownum = 4000 * y + z for element in column: writer = csv.writer(epistemicfile) if y <= 50: y = y + 1 writer.writerow([element]) writer.writerow(',') rownum = x * y + z if y > 50: y = 0 z = z + 1 writer.writerow(' ') rownum = x * y + z if z >= 4008: break What is going on: I am taking each row in the raw data file in iterations of 4000, so that I can separate them with commas for the 50 experiments. When y, the experiment indicator here, reaches 50, it resets back to experiment 0, and adds 1 to z, which tells it which row to look at, by the formula of 4000 * y + z. When it completes the rows for all 50 experiments, it is finished. The problem here is that I don't know how to get python to write the actual values in quotes, and my separators outside of quotes. Any help will be most appreciated. Apologies if this seems a stupid question, I have no programming experience, this is my first attempt ever. Thank you.

    Read the article

  • Keeping WPF grids from getting out of parent bounds

    - by Jonathan Perry
    In my UI, I have a big grid with two columns and one row. in the right column, I have a grid with three rows where in the top row I have a user control, and in the two bottom rows I have two Expander objects, each containing an ItemsControl with a list that gets populated in runtime. Sometimes, that list gets really long and "spills" from the screen towards the bottom. What I want to do is to allow the user to see both expanders, be able to expand or collapse them while keeping them both in sight. I tried wrapping them in WrapPanels or StackPanel but to no avail. Here's some code to help explain my problem: <Grid Grid.Row="1" x:Name="grid1"> <Grid.RowDefinitions> <RowDefinition Height="*" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <Expander Grid.Row="0" Header="Expander 1" x:Name="expander1" FontSize="14" IsExpanded="True"> <Expander.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FFC4C4C4" Offset="0" /> <GradientStop Color="White" Offset="1" /> </LinearGradientBrush> </Expander.Background> <ContentPresenter Content="{Binding ViewModel.OpenAlerts, ElementName=m_viewControl}" ClipToBounds="True"/> </Expander> <Expander Grid.Row="1" x:Name="expander2" Header="Expander 2" FontSize="14" IsExpanded="True"> <Expander.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FFC4C4C4" Offset="0" /> <GradientStop Color="White" Offset="1" /> </LinearGradientBrush> </Expander.Background> <ContentPresenter Content="{Binding ViewModel.ClosedAlerts, ElementName=m_viewControl}" ClipToBounds="True"/> </Expander> </Grid> Any assistance or tips will be highly appreciated! Thanks, John.

    Read the article

  • Form value not passed to Seam bean after a4j reRender

    - by Casper
    I'm making a webapp in Seam but ran into a problem I can't seem to fix. I have a JSF form where the customer can select a reservation type through a combobox. Based on the selected value, other form components gets rendered. For example: the customer selects Hours as reservation type, a panelGroup gets rendered where the customer can select a start- and an end hour. But if the customer would select 'part of the day' as reservation type, a selectOneMenu gets rendered where the customer can select a part of the day (morning, afternoon, evening) The rerendering well but the values of the components with a rendered conditional won't get passed to the bean. They stay null values. This is the code i'm talking about: <h:panelGrid columns="2"> <h:outputText value="Reservation Type" /> <h:selectOneMenu value="#{selectedPeriodPart}"> <s:selectItems value="#{productManager.getAvailableDayPartsSpot()}" var="daypart" label="#{daypart.label}"></s:selectItems> <s:convertEnum /> <a4j:support ajaxSingle="true" event="onchange" action="#" reRender="spot"></a4j:support> </h:selectOneMenu> <h:outputText id="date_spot" value="Date" /> <a4j:outputPanel id="calendar_spot" layout="block"> <rich:calendar value="#{reservation.reservationPeriod.startDate}" locale="en" cellWidth="24px" cellHeight="22px" style="width:200px" /> </a4j:outputPanel> <h:outputText rendered="#{selectedPeriodPart eq 'DAY_PART'}" value="Daypart" /> <h:selectOneMenu value="#{selectedDaypart}" rendered="#{selectedPeriodPart eq 'DAY_PART'}"> <f:selectItem id="si_morning" itemLabel="Morning (6:00 - 12:00)" itemValue="morning" /> <f:selectItem id="si_afternoon" itemLabel="Afternoon (12:00 - 18:00)" itemValue="afternoon" /> <f:selectItem id="si_evening" itemLabel="Evening (18:00 - 00:00)" itemValue="evening" /> </h:selectOneMenu> <h:outputText rendered="#{selectedPeriodPart eq 'HOURS'}" value="Hours" /> <h:panelGroup id="hours_spot" rendered="#{selectedPeriodPart eq 'HOURS'}"> <ui:include src="/includes/reservation/select_hours.xhtml" /> </h:panelGroup> </h:panelGrid> </s:div></code> Note: The calendar value do get passed back to the bean but the value of this piece of code doesn't (it does if you remove the rendered conditional):

    Read the article

  • live search with Jquery

    - by user272899
    Hello! I am trying to implement a live search on my site. I am using a script somebody has already created. http://www.reynoldsftw.com/2009/03/live-mysql-database-search-with-jquery/ I have got the Jquery, css, html working correctly but am having troubles with the php. I need to change it to contain my database information but everytime I do I recieve an error: Warning: mysql_fetch_array() expects parameter 1 to be resource, boolean given in C:\wamp\www\search.php on line 33 These are the details of my database: database name: development table name: links Columns: id, sitename, siteurl, description, category This is the php script <?php $dbhost = "localhost"; $dbuser = "root"; $dbpass = "password"; $dbname = "links"; $conn = mysql_connect($dbhost, $dbuser, $dbpass) or die ('Error connecting to mysql'); mysql_select_db($dbname); if(isset($_GET['query'])) { $query = $_GET['query']; } else { $query = ""; } if(isset($_GET['type'])) { $type = $_GET['type']; } else { $query = "count"; } if($type == "count") { $sql = mysql_query("SELECT count(url_id) FROM urls WHERE MATCH(url_url, url_title, url_desc) AGAINST('$query' IN BOOLEAN MODE)"); $total = mysql_fetch_array($sql); $num = $total[0]; echo $num; } if($type == "results") { $sql = mysql_query("SELECT url_url, url_title, url_desc FROM urls WHERE MATCH(url_url, url_title, url_desc) AGAINST('$query' IN BOOLEAN MODE)"); while($array = mysql_fetch_array($sql)) { $url_url = $array['url_url']; $url_title = $array['url_title']; $url_desc = $array['url_desc']; echo "<div class=\"url-holder\"><a href=\"" . $url_url . "\" class=\"url-title\" target=\"_blank\">" . $url_title . "</a> <div class=\"url-desc\">" . $url_desc . "</div></div>"; } } mysql_close($conn); ?> Can anybody help me input this database info correctly? I have tried many times but keep getting an error. Thanks in advance.

    Read the article

  • hibernate3-maven-plugin: entiries in different maven projects, hbm2ddl fails

    - by Mike
    I'm trying to put an entity in a different maven project. In the current project I have: @Entity public class User { ... private FacebookUser facebookUser; ... public FacebookUser getFacebookUser() { return facebookUser; } ... public void setFacebookUser(FacebookUser facebookUser) { this.facebookUser = facebookUser; } Then FacebookUser (in a different maven project, that's a dependency of a current project) is defined as: @Entity public class FacebookUser { ... @Id @GeneratedValue(strategy = GenerationType.AUTO) public Long getId() { return id; } Here is my maven hibernate3-maven-plugin configuration: <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>hibernate3-maven-plugin</artifactId> <version>2.2</version> <executions> <execution> <phase>process-classes</phase> <goals> <goal>hbm2ddl</goal> </goals> </execution> </executions> <configuration> <components> <component> <name>hbm2ddl</name> <implementation>jpaconfiguration</implementation> </component> </components> <componentProperties> <ejb3>false</ejb3> <persistenceunit>Default</persistenceunit> <outputfilename>schema.ddl</outputfilename> <drop>false</drop> <create>true</create> <export>false</export> <format>true</format> </componentProperties> </configuration> </plugin> Here is the error I'm getting: org.hibernate.MappingException: Could not determine type for: com.xxx.facebook.model.FacebookUser, at table: user, for columns: [org.hibernate.mapping.Column(facebook_user)] I know that FacebookUser is on the classpath because if I make facebook user transient, project compiles fine: @Transient public FacebookUser getFacebookUser() { return facebookUser; }

    Read the article

  • SET game odds simulation (MATLAB)

    - by yuk
    Here is an interesting problem for your weekend. :) I recently find the great card came - SET. Briefly, there are 81 cards with the four features: symbol (oval, squiggle or diamond), color (red, purple or green), number (one, two or three) or shading (solid, striped or open). The task is to find (from selected 12 cards) a SET of 3 cards, in which each of the four features is either all the same on each card or all different on each card (no 2+1 combination). In my free time I've decided to code it in MATLAB to find a solution and to estimate odds of having a set in randomly selected cards. Here is the code: %% initialization K = 12; % cards to draw NF = 4; % number of features (usually 3 or 4) setallcards = unique(nchoosek(repmat(1:3,1,NF),NF),'rows'); % all cards: rows - cards, columns - features setallcomb = nchoosek(1:K,3); % index of all combinations of K cards by 3 %% test tic NIter=1e2; % number of test iterations setexists = 0; % test results holder % C = progress('init'); % if you have progress function from FileExchange for d = 1:NIter % C = progress(C,d/NIter); % cards for current test setdrawncardidx = randi(size(setallcards,1),K,1); setdrawncards = setallcards(setdrawncardidx,:); % find all sets in current test iteration for setcombidx = 1:size(setallcomb,1) setcomb = setdrawncards(setallcomb(setcombidx,:),:); if all(arrayfun(@(x) numel(unique(setcomb(:,x))), 1:NF)~=2) % test one combination setexists = setexists + 1; break % to find only the first set end end end fprintf('Set:NoSet = %g:%g = %g:1\n', setexists, NIter-setexists, setexists/(NIter-setexists)) toc 100-1000 iterations are fast, but be careful with more. One million iterations takes about 15 hours on my home computer. Anyway, with 12 cards and 4 features I've got around 13:1 of having a set. This is actually a problem. The instruction book said this number should be 33:1. And it was recently confirmed by Peter Norvig. He provides the Python code, but I didn't test it. So can you find an error?

    Read the article

  • Nice, clean, simple way of getting a dataset from ASP.NET to plain HTML jQuery or JavaScript library

    - by David S
    I know this is a probable open ended question, and I have tried looking around so much over the last year or two... maybe I am looking for a perfect place that doesn't exist! of course it's all about perception no less.. Anyway, just to clarify what I am trying to do and why: I want to be able to use (primarily for the moment) ASP.NET or services thereof to get a dataset - whatever the source data, I can obviously get a dataset of rows/Columns. I want to be able to, as simply as possible, get that data over to the client via xml/json/whatever, to then use in a "variety" of ways. "Variety" of ways meaning I would like to "easily" bind that data to say a grid, or a combo dropdown or just simply render to a textbox - BUT by referencing the dataset as I would say on the serverside. Now I know this all sounds simplistic, and I know there are lots of complications.. so I have tried the following so far over the last year or so: ExtJS - very good, nice solid framework, but just found it a bit too much to use in everyday basic apps - great if I was building a whole application with it Yahoo YUI - not looked recently, but I guess some of the concepts with ExtJS were similar? JQuery - of course to get data etc, it was ok, and I guess there are so many 3rd party plugins, that a mix and match might work? Adobe SPRY - ironically this was as close to getting a dataset style structure to Javascript/client, although it seemed to drop off/go quiet..? I maybe wrong.. I did have a very cursory play with Tibco GI and another one I cannot remember the name of! but again, it felt like it was great to build a whole app perhaps? Anyway, I am very amazed by all of the technologies coming out, and really not biased one way or the other, I really just want a very simple way of getting data from the server, and having a basic/very flexible way of working with that data in the client without using server technologies.. I need to keep the server flexible as I may need to use PHP, or java technologies not just .NET So again, sorry for the rambles, but if anyone out there has had a simple experience, or would like to share some ideas, it would be very welcomed!! David.

    Read the article

  • ASP.NET MVC: How to display strongly typed view model, containing list of items, which also contain

    - by Sam Delaney
    Hi, I'm building an app using ASP.NET MVC which I want to use a strongly type view model, which contains a List called items which contains an id int and itemName string. The view model also conatins a List called people, and the Person class contains a List. The way I want to display the information is as a table, with each row having a column of Person name, then n number of columns which contain checkboxes, one for each of the List, and checked based on whether the Person's List (called items) contains the id of the Item. I have the display working fine, but I'm struggling to understand how to name the items so that the posted method can read the data. This is what I have in the BeginForm: <table cellpadding="20"> <thead> <th>Person name</th> <!-- for each of the items, create a column with the item name --> <% foreach( var i in Model.items ) { %> <th><%= Html.Encode(i.itemName) %></th> <% } %> </thead> <% foreach( var p in Model.people ) { %> <tr> <td><%= Html.Encode(p.name) %></td> <!-- for each item, create a column with a checkbox --> <% foreach( var i in Model.items ) { %> <td> <% if( p.items.Contains(i.id) ) { %> <!-- vm is the name of the view model passed to the view --> <%= Html.CheckBox( "vm.people[" + p.id + "].items[" + i.id + "]", true ) %> <% } else { %> <%= Html.CheckBox( "vm.people[" + p.id + "].items[" + i.id + "]", false ) %> <% } %> </td> <% } %> </tr> <% } %> </table> And this code displays the information perfectly. When I click submit, however, I get an Object Reference Not Set.. error message. Can anyone help with this please?

    Read the article

  • Can I create a custom class that inherits from a strongly typed DataRow?

    - by Calvin Fisher
    I'm working on a huge, old project with a lot of brittle code, some of which has been around since the .NET 1.0 era, and it has been and will be worked on by other people... so I'd like to change as little as possible. I have one project in my solution that contains DataSet.xsd. This project compiles to a separate assembly (Data.dll). The database schema includes several tables arranged more or less hierarchically, but the only way the tables are actually linked together is through joins. I can get, e.g. DepartmentRow and EmployeeRow objects from the autogenerated code. EmployeeRow contains information from the employee's corresponding DepartmentRow through a join. I'm making a new report to view multiple departments and all their employees. If I use the existing data access scheme, all I will be able to get is a spreadsheet-like output where each employee is represented on one line, with department information repeated over and over in its appropriate columns. E.g.: Department1...Employee1... Department1...Employee2... Department2...Employee3... But what the customer would like is to have each department render like a heading, with a list of employees beneath each. E.g.: - Department1... Employee1... Employee2... + Department2... I'm trying to do this by inheriting hierarchical objects from the autogenerated Row objects. E.g.: public class Department : DataSet.DepartmentRow { public List<Employee> Employees; } That way I could nest the data in the report by using a collection of Department objects as the DataSource, each of which will put its list of Employees in a subreport. The problem is that this gives me a The type Data.DataSet.DepartmentRow has no constructors defined error. And when I try to make a constructor, e.g. public class Department : DataSet.DepartmentRow { private Department() { } public List<Employee> Employees; } I get a 'Data.DataSet.DepartmentRow(System.Data.DataRowBuilder)' is inaccessible due to its protection level. error in addition to the first one. Is there a way to accomplish what I'm trying to do? Or is there something else I should be trying entirely?

    Read the article

  • Should we denormalize database to improve performance?

    - by Groo
    We have a requirement to store 500 measurements per second, coming from several devices. Each measurement consists of a timestamp, a quantity type, and several vector values. Right now there is 8 vector values per measurement, and we may consider this number to be constant for needs of our prototype project. We are using HNibernate. Tests are done in SQLite (disk file db, not in-memory), but production will probably be MsSQL. Our Measurement entity class is the one that holds a single measurement, and looks like this: public class Measurement { public virtual Guid Id { get; private set; } public virtual Device Device { get; private set; } public virtual Timestamp Timestamp { get; private set; } public virtual IList<VectorValue> Vectors { get; private set; } } Vector values are stored in a separate table, so that each of them references its parent measurement through a foreign key. We have done a couple of things to ensure that generated SQL is (reasonably) efficient: we are using Guid.Comb for generating IDs, we are flushing around 500 items in a single transaction, ADO.Net batch size is set to 100 (I think SQLIte does not support batch updates? But it might be useful later). The problem Right now we can insert 150-200 measurements per second (which is not fast enough, although this is SQLite we are talking about). Looking at the generated SQL, we can see that in a single transaction we insert (as expected): 1 timestamp 1 measurement 8 vector values which means that we are actually doing 10x more single table inserts: 1500-2000 per second. If we placed everything (all 8 vector values and the timestamp) into the measurement table (adding 9 dedicated columns), it seems that we could increase our insert speed up to 10 times. Switching to SQL server will improve performance, but we would like to know if there might be a way to avoid unnecessary performance costs related to the way database is organized right now. [Edit] With in-memory SQLite I get around 350 items/sec (3500 single table inserts), which I believe is about as good as it gets with NHibernate (taking this post for reference: http://ayende.com/Blog/archive/2009/08/22/nhibernate-perf-tricks.aspx). But I might as well switch to SQL server and stop assuming things, right? I will update my post as soon as I test it.

    Read the article

  • Matlab wont extract first row & column because of matrix dimensions !

    - by ZaZu
    Hey guys, I am tracking an object that is thrown in air, and this object governs a parabolic pattern. Im tracking the object through a series of 30 images. I managed to exclude all the background and keep the object apparent, then used its centroid to get its coordinates and plot them. Now im supposed to predict where the object is going to fall, so I used polyfit & polyval .. the problem is, matlab says ??? Index exceeds matrix dimensions. Now the centroid creates its own structure with a row and 2 columns. Everytime the object moves in the loop, it updates the first row only .. Here is part of the code : For N=1:30 . . . x=centroid(1,1); % extract first row and column for x y=centroid(1,2); % extract secnd row and column for x plot_xy=plot(x,y) set(plot_xy,'XData',x(1:N),'YData',y(1:N)); fitting=polyfit(x(1:N),y(1:N),2); parabola=plot(x,nan(23,1)); evaluate=polyval(fitting,x); set(parabola,'YData',evaluate) . . end The error message I get is ??? Index exceeds matrix dimensions. It seems that (1:N) is causing the problems .. I honestly do not know why .. But when I remove N, the object is plotted along with its points, but polyfitting wont work, it gives me an error saying : Warning: Polynomial is not unique; degree >= number of data points. > In polyfit at 72 If I made it (1:N-1) or something, it plots more points before it starts giving me the same error (not unique ...) . Any ideas why ?? Thanks alot !!

    Read the article

  • Prevent SQL Injection in Dynamic column names

    - by Mr Shoubs
    I can't get away without writing some dynamic sql conditions in a part of my system (using Postgres). My question is how best to avoid SQL Injection with the method I am currently using. EDIT (Reasoning): There are many of columns in a number of tables (a number which grows (only) and is maintained elsewhere). I need a method of allowing the user to decide which (predefined) column they want to query (and if necessary apply string functions to). The query itself is far too complex for the user to write themselves, nor do they have access to the db. There are 1000's of users with varying requirements and I need to remain as flexible as possible - I shouldn't have to revisit the code unless the main query needs to change - Also, there is no way of knowing what conditions the user will need to use. I have objects (received via web service) that generates a condition (the generation method is below - it isn't perfect yet) for some large sql queries. The _FieldName is user editable (parameter name was, but it didn't need to be) and I am worried it could be an attack vector. I put double quotes (see quoted identifier) around the field name in an attempt to sanitize the string, this way it can never be a key word. I could also look up the field name against a list of fields, but it would be difficult to maintain on a timely basis. Unfortunately the user must enter the condition criteria, I am sure there must be more I can add to the sanatize method? and does quoting the column name make it safe? (my limited testing seems to think so). an example built condition would be "AND upper(brandloaded.make) like 'O%' and upper(brandloaded.make) not like 'OTHERBRAND'" ... Any help or suggestions are appreciated. Public Function GetCondition() As String Dim sb As New Text.StringBuilder 'put quote around the table name in an attempt to prevent some sql injection 'http://www.postgresql.org/docs/8.2/static/sql-syntax-lexical.html sb.AppendFormat(" {0} ""{1}"" ", _LogicOperator.ToString, _FieldName) Select Case _ConditionOperator Case ConditionOperatorOptions.Equals sb.Append(" = ") ... End Select sb.AppendFormat(" {0} ", Me.UniqueParameterName) 'for parameter Return Me.Sanitize(sb) End Function Private Function Sanitize(ByVal sb As Text.StringBuilder) As String 'compare against a similar blacklist mentioned here: http://forums.asp.net/t/1254125.aspx sb.Replace(";", "") sb.Replace("'", "") sb.Replace("\", "") sb.Replace(Chr(8), "") Return sb.ToString End Function Public ReadOnly Property UniqueParameterName() As String Get Return String.Concat(":" _UniqueIdentifier) End Get End Property

    Read the article

  • check only one checkbox in gridview using jquery

    - by Gurbax Singh Bhangal
    i have a grid view in which i have placed the checkbox in itemtemplate i want only the one checkbox is selected from Gridview to select that perticular row so that i can use that id to edit or delete the row aspx page code is <asp:TemplateField Visible="false"> <ItemTemplate> <asp:Label ID="lblId" runat="server" Text='<%#Eval("id") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:TemplateField> <HeaderTemplate> Select </HeaderTemplate> <ItemTemplate> <asp:CheckBox ID="chkSelect" runat="server"/> </ItemTemplate> </asp:TemplateField> <asp:TemplateField> <HeaderTemplate> Branch Name </HeaderTemplate> <ItemTemplate> <asp:Label ID="lblBranch_Name" runat="server" Text='<%# Bind("Branch") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:TemplateField> <HeaderTemplate> Address </HeaderTemplate> <ItemTemplate> <asp:Label ID="lblAddress" runat="server" Text='<%# Eval("Address") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:TemplateField> <HeaderTemplate> City </HeaderTemplate> <ItemTemplate> <asp:Label ID="lblCity" runat="server" Text='<%# Bind("City") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> </Columns> and i want when i click on the checkbox which is at first of each row only one check box is selected from all the rows thanks

    Read the article

  • How to access and work with XML from API in C#

    - by Jarek
    My goal is to pull XML data from the API and load it to a sql server database. The frist step I'm attempting here is to access the data and display it. Once I get this to work I'll loop through each row and insert the values into a sql server database. When I try to run the code below nothing happens and when I paste the url directly into the browser I get this error "2010-03-08 04:24:17 Wallet exhausted: retry after 2010-03-08 05:23:58. 2010-03-08 05:23:58" To me it seems that every iteration of the foreach loop makes a call to the site and I get blocked for an hour. Am I retrieving data from the API in an incorrect manner? Is there some way to load the data into memory or an array then loop through that? Here's the bit of code I hacked together. using System; using System.Data.SqlClient; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using System.Xml; using System.Data; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { try { string userID = "123"; string apiKey = "abc456"; string characterID = "789"; string url = "http://api.eve-online.com/char/WalletTransactions.xml.aspx?userID=" + userID + "&apiKey=" + apiKey + "&characterID=" + characterID; XmlDocument xmldoc = new XmlDocument(); xmldoc.Load(url); XmlNamespaceManager xnm1 = new XmlNamespaceManager(xmldoc.NameTable); XmlNodeList nList1 = xmldoc.SelectNodes("result/rowset/row", xnm1); foreach (XmlNode xNode in nList1) { Response.Write(xNode.InnerXml + "<br />"); } } catch (SqlException em) { Response.Write(em.Message); } } } Here's a sample of the xml <eveapi version="2"> <currentTime>2010-03-06 17:38:35</currentTime> <result> <rowset name="transactions" key="transactionID" columns="transactionDateTime,transactionID,quantity,typeName,typeID,price,clientID,clientName,stationID,stationName,transactionType,transactionFor"> <row transactionDateTime="2010-03-06 17:16:00" transactionID="1343566007" quantity="1" typeName="Co-Processor II" typeID="3888" price="1122999.00" clientID="1404318579" clientName="unseenstrike" stationID="60011572" stationName="Osmeden IX - Moon 6 - University of Caille School" transactionType="sell" transactionFor="personal" /> <row transactionDateTime="2010-03-06 17:15:00" transactionID="1343565894" quantity="1" typeName="Co-Processor II" typeID="3888" price="1150000.00" clientID="1404318579" clientName="unseenstrike" stationID="60011572" stationName="Osmeden IX - Moon 6 - University of Caille School" transactionType="sell" transactionFor="personal" /> </rowset> </result> <cachedUntil>2010-03-06 17:53:35</cachedUntil> </eveapi>

    Read the article

  • Closure Tables - Is this enough data to display a tree view?

    - by James Pitt
    Here is the table I have created by testing the closure table method. | id | parentId | childId | hops | | | | | 270 | 6 | 6 | 0 | 271 | 7 | 7 | 0 | 272 | 8 | 8 | 0 | 273 | 9 | 9 | 0 | 276 | 10 | 10 | 0 | 281 | 9 | 10 | 1 | 282 | 7 | 9 | 1 | 283 | 7 | 10 | 2 | 285 | 7 | 8 | 1 | 286 | 6 | 7 | 1 | 287 | 6 | 9 | 2 | 288 | 6 | 10 | 3 | 289 | 6 | 8 | 2 | 293 | 6 | 9 | 1 | 294 | 6 | 10 | 2 I am trying to create a simple tree of this using PHP. There does not seem to be enough data to create the table. For example, when I look purely at parentId = 6: -Part 6 -Part 7 - ? - ? -Part 9 - ? - ? We know that parts 8 and 10 exists below Part 7 or 9, but not which. We know that part 10 exists at both 3 and 4 nodes deep but where? If I look at other data in the table it is possible to tell it should be: - Part 6 - Part 7 - Part 9 - Part 10 - Part 9 - Part 10 I thought one of the benefits of closure tables was there was no need for recursive queries? Could you help explain what I am doing wrong? EDIT: For clarification, this is a mapping table. There is another table called "parts" which has a column called part_id that correlates to both the parentId and childId columns in the "closure" table. The "id" column in the table above (closure) is just for the purposes of maintaining a primary key. It is not really necessary. The methods I have used to create this closure table is described in the following article: http://dirtsimple.org/2010/11/simplest-way-to-do-tree-based-queries.html EDIT2: It can have two and three hops. I will explain easier by assigning names to the items. Part 6 = Bicycle Part 7 = Gears Part 8 = Chain Part 9 = Bolt Part 10 = Nut Nut is part of Bolt. The Bolt and Nut combo exists directly within Bicycle and within Gears which is part of Bicycle. In relation to what method to use I have looked at Adjacency, Edges, Enum Paths, Closures, DAGS(networks) and the Nested Set Model. I am still trying to work out what is what, but this is an extremely complex component database where there are multiple parents and any modification to a sub-tree must propogate through the other trees. More importantly there will be insertions, deletions and tree views that I wish to avoid recursion during general use, even at the cost of database space and query time during entry.

    Read the article

  • How can i convert this to a factory/abstract factory?

    - by Amitd
    I'm using MigraDoc to create a pdf document. I have business entities similar to the those used in MigraDoc. public class Page{ public List<PageContent> Content { get; set; } } public abstract class PageContent { public int Width { get; set; } public int Height { get; set; } public Margin Margin { get; set; } } public class Paragraph : PageContent{ public string Text { get; set; } } public class Table : PageContent{ public int Rows { get; set; } public int Columns { get; set; } //.... more } In my business logic, there are rendering classes for each type public interface IPdfRenderer<T> { T Render(MigraDoc.DocumentObjectModel.Section s); } class ParagraphRenderer : IPdfRenderer<MigraDoc.DocumentObjectModel.Paragraph> { BusinessEntities.PDF.Paragraph paragraph; public ParagraphRenderer(BusinessEntities.PDF.Paragraph p) { paragraph = p; } public MigraDoc.DocumentObjectModel.Paragraph Render(MigraDoc.DocumentObjectModel.Section s) { var paragraph = s.AddParagraph(); // add text from paragraph etc return paragraph; } } public class TableRenderer : IPdfRenderer<MigraDoc.DocumentObjectModel.Tables.Table> { BusinessEntities.PDF.Table table; public TableRenderer(BusinessEntities.PDF.Table t) { table =t; } public MigraDoc.DocumentObjectModel.Tables.Table Render(Section obj) { var table = obj.AddTable(); //fill table based on table } } I want to create a PDF page as : var document = new Document(); var section = document.AddSection();// section is a page in pdf var page = GetPage(1); // get a page from business classes foreach (var content in page.Content) { //var renderer = createRenderer(content); // // get Renderer based on Business type ?? // renderer.Render(section) } For createRenderer() i can use switch case/dictionary and return type. How can i get/create the renderer generically based on type ? How can I use factory or abstract factory here? Or which design pattern better suits this problem?

    Read the article

  • What's a clean way to break up a DataTable into chunks of a fixed size with Linq?

    - by Michael Haren
    Update: Here's a similar question Suppose I have a DataTable with a few thousand DataRows in it. I'd like to break up the table into chunks of smaller rows for processing. I thought C#3's improved ability to work with data might help. This is the skeleton I have so far: DataTable Table = GetTonsOfData(); // Chunks should be any IEnumerable<Chunk> type var Chunks = ChunkifyTableIntoSmallerChunksSomehow; // ** help here! ** foreach(var Chunk in Chunks) { // Chunk should be any IEnumerable<DataRow> type ProcessChunk(Chunk); } Any suggestions on what should replace ChunkifyTableIntoSmallerChunksSomehow? I'm really interested in how someone would do this with access C#3 tools. If attempting to apply these tools is inappropriate, please explain! Update 3 (revised chunking as I really want tables, not ienumerables; going with an extension method--thanks Jacob): Final implementation: Extension method to handle the chunking: public static class HarenExtensions { public static IEnumerable<DataTable> Chunkify(this DataTable table, int chunkSize) { for (int i = 0; i < table.Rows.Count; i += chunkSize) { DataTable Chunk = table.Clone(); foreach (DataRow Row in table.Select().Skip(i).Take(chunkSize)) { Chunk.ImportRow(Row); } yield return Chunk; } } } Example consumer of that extension method, with sample output from an ad hoc test: class Program { static void Main(string[] args) { DataTable Table = GetTonsOfData(); foreach (DataTable Chunk in Table.Chunkify(100)) { Console.WriteLine("{0} - {1}", Chunk.Rows[0][0], Chunk.Rows[Chunk.Rows.Count - 1][0]); } Console.ReadLine(); } static DataTable GetTonsOfData() { DataTable Table = new DataTable(); Table.Columns.Add(new DataColumn()); for (int i = 0; i < 1000; i++) { DataRow Row = Table.NewRow(); Row[0] = i; Table.Rows.Add(Row); } return Table; } }

    Read the article

  • How to optimize this SQL query for a rectangular region?

    - by Andrew B.
    I'm trying to optimize the following query, but it's not clear to me what index or indexes would be best. I'm storing tiles in a two-dimensional plane and querying for rectangular regions of that plane. The table has, for the purposes of this question, the following columns: id: a primary key integer world_id: an integer foreign key which acts as a namespace for a subset of tiles tileY: the Y-coordinate integer tileX: the X-coordinate integer value: the contents of this tile, a varchar if it matters. I have the following indexes: "ywot_tile_pkey" PRIMARY KEY, btree (id) "ywot_tile_world_id_key" UNIQUE, btree (world_id, "tileY", "tileX") "ywot_tile_world_id" btree (world_id) And this is the query I'm trying to optimize: ywot=> EXPLAIN ANALYZE SELECT * FROM "ywot_tile" WHERE ("world_id" = 27685 AND "tileY" <= 6 AND "tileX" <= 9 AND "tileX" >= -2 AND "tileY" >= -1 ); QUERY PLAN ------------------------------------------------------------------------------------------------------------------------------------------- Bitmap Heap Scan on ywot_tile (cost=11384.13..149421.27 rows=65989 width=168) (actual time=79.646..80.075 rows=96 loops=1) Recheck Cond: ((world_id = 27685) AND ("tileY" <= 6) AND ("tileY" >= (-1)) AND ("tileX" <= 9) AND ("tileX" >= (-2))) -> Bitmap Index Scan on ywot_tile_world_id_key (cost=0.00..11367.63 rows=65989 width=0) (actual time=79.615..79.615 rows=125 loops=1) Index Cond: ((world_id = 27685) AND ("tileY" <= 6) AND ("tileY" >= (-1)) AND ("tileX" <= 9) AND ("tileX" >= (-2))) Total runtime: 80.194 ms So the world is fixed, and we are querying for a rectangular region of tiles. Some more information that might be relevant: All the tiles for a queried region may or may not be present The height and width of a queried rectangle are typically about 10x10-20x20 For any given (world, X) or (world, Y) pair, there may be an unbounded number of matching tiles, but the worst case is currently around 10,000, and typically there are far fewer. New tiles are created far less frequently than existing ones are updated (changing the 'value'), and that itself is far less frequent that just reading as in the query above. The only thing I can think of would be to index on (world, X) and (world, Y). My guess is that the database would be able to take those two sets and intersect them. The problem is that there is a potentially unbounded number of matches for either for either of those. Is there some other kind of index that would be more appropriate?

    Read the article

  • How can I structure and recode messy categorical data in R?

    - by briandk
    I'm struggling with how to best structure categorical data that's messy, and comes from a dataset I'll need to clean. The Coding Scheme I'm analyzing data from a university science course exam. We're looking at patterns in student responses, and we developed a coding scheme to represent the kinds of things students are doing in their answers. A subset of the coding scheme is shown below. Note that within each major code (1, 2, 3) are nested non-unique sub-codes (a, b, ...). What the Raw Data Looks Like I've created an anonymized, raw subset of my actual data which you can view here. Part of my problem is that those who coded the data noticed that some students displayed multiple patterns. The coders' solution was to create enough columns (reason1, reason2, ...) to hold students with multiple patterns. That becomes important because the order (reason1, reason2) is arbitrary--two students (like student 41 and student 42 in my dataset) who correctly applied "dependency" should both register in an analysis, regardless of whether 3a appears in the reason column or the reason2 column. How Can I Best Structure Student Data? Part of my problem is that in the raw data, not all students display the same patterns, or the same number of them, in the same order. Some students may do just one thing, others may do several. So, an abstracted representation of example students might look like this: Note in the example above that student002 and student003 both are coded as "1b", although I've deliberately shown the order as different to reflect the reality of my data. My (Practical) Questions Should I concatenate reason1, reason2, ... into one column? How can I (re)code the reasons in R to reflect the multiplicity for some students? Thanks I realize this question is as much about good data conceptualization as it is about specific features of R, but I thought it would be appropriate to ask it here. If you feel it's inappropriate for me to ask the question, please let me know in the comments, and stackoverflow will automatically flood my inbox with sadface emoticons. If I haven't been specific enough, please let me know and I'll do my best to be clearer.

    Read the article

  • NHibernate : delete error

    - by MadSeb
    Hi, Model: I have a model in which one Installation can contain multiple "Computer Systems". Database: The table Installations has two columns Name and Description. The table ComputerSystems has three columsn Name, Description and InstallationId. Mappings: I have the following mapping for Installation: <?xml version="1.0" encoding="utf-8"?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" assembly="myProgram.Core" namespace="myProgram"> <class name="Installation" table="Installations" lazy="true"> <id name="Id" column="Id" type="int"> <generator class="native" /> </id> <property name="Name" column="Name" type="string" not-null="true" /> <property name="Description" column="Description" type="string" /> <bag name="ComputerSystems" inverse="true" lazy="true" cascade="all-delete-orphan"> <key column="InstallationId" /> <one-to-many class="ComputerSystem" /> </bag> </class> </hibernate-mapping> I have the following mapping for ComputerSystem: <?xml version="1.0" encoding="utf-8"?> <id name="Id" column="ID" type="int"> <generator class="native" /> </id> <property name="Name" column="Name" type="string" not-null="true" /> <property name="Description" column="Description" type="string" /> <many-to-one name="Installation" column="InstallationID" cascade="save-update" not-null="true" /> Classes: The Installation class is: public class Installation { public virtual String Description { get; set; } public virtual String Name { get; set; } public virtual IList<ComputerSystem> ComputerSystems { get { if (_computerSystemItems== null) { lock (this) { if (_computerSystemItems== null) _computerSystemItems= new List<ComputerSystem>(); } } return _computerSystemItems; } set { _computerSystemItems= value; } } protected IList<ComputerSystem> _computerSystemItems; public Installation() { Description = ""; Name= ""; } } The ComputerSystem class is: public class ComputerSystem { public virtual String Name { get; set; } public virtual String Description { get; set; } public virtual Installation Installation { get; set; } } The issue is that I get an error when trying to delete an installation that contains a ComputerSystem. The error is: "deleted object would be re-saved by cascade (remove deleted object from associations)". Can anyone help ? Regards, Seb

    Read the article

  • How do you use technology to memorize set of terms?

    - by user49767
    Always there are few set of items needs to be memorized in short span of time. Here are my following cases. 1) My Job requires some set of items needs to be memorized. 2) I am a developer who has to learn 150+ tags within next 3 days. 3) Fix developer/support has to remember minimum of 125+ tags (set of possible values). 4) It is better if team's SQL developer knows all the table and columns in my database. 5) When guys join new department or job. Memorizing few related items will definitely gives some benefit. Most of the cases, I suggest people to understand the domain better and nothing wrong in using google (but remember correct search-word). But recently I came across a junior developer who took lot of effort in memorizing set of things (150+ table structures, fix protocol tags, almost 300+ configuration items from property file) and was very very successful in his job and was swift in responding for support queries. Needless to say he is smart worker too (not a dumb guy). When I try to recollect some of the successful employees I met, they were so good in remembering entire schema and they did in short span of time. But I don't argue that memorizing alone gives success, but it greatly helps when situation demands. Here my question is, I am not good at remembering things, but it shouldn't be lame excuse. Hence I am evaluating using technolgies better to memorize set of items. Not very much interested in memory techniques (mnemoninc, photography memory, etc..). Even I have recorded 100+ items and listen to that whenever I found free time, defintely there were some fruitful result. Now I need your suggestion about what are all the ways to exploit technology to memorize. There could be so many reason why guys remember a subject (passionate, essential, author, creator, responsbile). Not interested in dissecting why guys remeber. Rather much interested in using ways, and techniques (cheat sheet...) to remember a set of itmes. Note : I appreciate, encourage people who could rephrase my question better. Note : I have kept couple of cheat-sheet close to my monitor, honestly it did not help me :).

    Read the article

  • from one-dimensional to two-dimensional array

    - by Thijs
    Hi again, I have this PHP one dimensional array: Array ( [Female--N] => 11 [Male--N] => 11 [Humans--N] => 11 [Adult--N] => 8 [Adolescent--N] => 8 [Reaction Time-physiology--N] => 6 [Acoustic Stimulation-methods--N] => 6 [Schizophrenia-genetics--Y] => 5 [Motion Perception--N] => 3 ) And i want a new array from this that looks like (i think this tow-dimensional..?): Array ( [Female][N] => 11 [Male][N] => 11 [Humans][N] => 11 [Adult][N] => 8 [Adolescent][N] => 8 [Reaction Time-physiology][N] => 6 [Acoustic Stimulation-methods][N] => 6 [Schizophrenia-genetics][Y] => 5 [Motion Perception][N] => 3 ) Can i use split method on key elements? Little bit harder... i also need to split on the single '_' underscore, i did this to prevent the columns getting mixed up... But the example below doesn't do the job right... $new_array = array(); foreach($MeshtagsArray as $key => $value) { $parts = explode('__', $key, 2); $parts2 = explode('_', $key, 2); $new_array[] = array( 'discriptor' => $parts[0], 'qualifier' => $parts2[1], 'major' => $parts[1], '#occurence' => $value ); So the output should be something like: [0] => Array ( [discriptor] => Female [qualifier] => [major] => N [#occurence] => 11 ........ [5] => Array ( [discriptor] => Reaction Time [qualifier] => physiology [major] => N [#occurence] => 6 Best regards, Thijs

    Read the article

  • Modal PopUp Extender labels wont update on Asynchronous Postback

    - by newbie2k
    Hi everyone! I have a ModalPopUpExtender with an UpdatePanel on it. On the UpdatePanel,there few labels and componentart Grid which Updates from the server on every Asynchronous postback when an image button is clicked. The Problem is that the server code updates the modalpopupextender labels as the information on the grid but it wont display the Updated version of it on the modal Popup Extender. Need some Help... Heres the sample code:     Name:     Loyalty Mode:     Expire Mode:     LoadingPanelClientTemplateId="LoadingFeedbackTemplate3" LoadingPanelPosition="MiddleCenter" LoadingPanelFadeDuration="1000" LoadingPanelFadeMaximumOpacity="60" OnNeedDataSource="LItemGrid_NeedDataSource" OnNeedRebind="LItemGrid_NeedRebind" OnPageIndexChanged="LItemGrid_PageIndexChanged" OnFilterCommand="LItemGrid_FilterCommand" OnSortCommand="LItemGrid_SortCommand" ShowFooter="true" PageSize="10" PagerStyle="Numbered" </Columns> </ComponentArt:GridLevel> </Levels> <ClientTemplates><ComponentArt:ClientTemplate Id="ClientTemplate2"> <table width="200" ><tr><td valign="center" align="center"> <table cellspacing="0" cellpadding="0" border="0"> <tr> <td style="font-size:10px;font-family:Verdana;">Loading...&nbsp;</td> <td><img src="images/spinner.gif" width="16" height="16" border="0"></td> </tr> </table> </td></tr></table> </ComponentArt:ClientTemplate> </ClientTemplates> </ComponentArt:Grid></ContentTemplate> <asp:Button ID="btnClose" runat="server" Text="Close" /> </asp:Panel> <asp:ModalPopupExtender TargetControlID="SaveImageButton1" ID="pnlModal_ModalPopupExtender" runat="server" DynamicServicePath="" Enabled="True" BackgroundCssClass="modalBackground" PopupControlID="pnlModal" CancelControlID="btnClose" DropShadow="true"> </asp:ModalPopupExtender> </ContentTemplate> </asp:UpdatePanel>

    Read the article

  • jQuery Table - Reference User Input Row Names and Values

    - by Vic
    I have several tables which are generated by another application, which I have no control over. I am totally new to jQuery and ajax, and have only a limited knowledge of jsp. Two sample rows are: <table class="sicknessForm"> <tr id="row_0" class="datarow"> <td id="col_2"><input name="row_0-col_2" class="tabcell" value="Injuries"></td> <td id="col_4"><input name="row_0-col_4" class="tabcell" value="01"></td> <td id="col_5"><input name="row_0-col_5" class="tabcell" value="2"></td> <td id="col_6"><input name="row_0-col_6" class="tabcell" value="5"></td> </tr> <tr id="row_1" class="datarow"> <td id="col_2"><input name="row_1-col_2" class="tabcell" value="Absences"></td> <td id="col_4"><input name="row_1-col_4" class="tabcell" value="100"></td> <td id="col_5"><input name="row_1-col_5" class="tabcell" value="102"></td> <td id="col_6"><input name="row_1-col_6" class="tabcell" value="105"></td> </tr> </table> There are more rows and columns in the actual tables. What I need to do is to pass the ordered row information to the database, e.g.: Injuries, 1, 2, 5 .... Absences 100, 102, 105... I can retrieve the values for each input using: $('#SicknessForm .userInput').each(function() { alert($(this).val()); }); 1) How can I loop through each row, get the value from the first column (Injuries) and place the data into an array to send to the server? 2) How do I reference the first row of each column to disable user input on it? $(:HowDoIReferenceThis).attr('disabled', ''); 3) I need to validate that each cell is numeric, other than the first column. Any pointers on this (otherwise I can check it in my servlet), especially on how to loop through all valid input cells (everything except 'Injuries','Abences', ... cells). Many Thanks! Vic

    Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >