Search Results

Search found 10719 results on 429 pages for 'hardware failure'.

Page 269/429 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• Running KVM/XEN/Hyper-V VMs from a RAM disk, is this possible? Practical?

  - by Ausmith1

  Currently I'm using ESX (v3 and v4) to test a scripted OS (Windows 2003) and application install DVD. The DVD ISO (8GB) is mounted on a 1Gbps NFS datastore and the VMDK's (20GB) are on an SSD mounted via NFS over a 10Gbps link. It still takes a lot longer than I'd really like for to run through a test iteration and I'm wondering if mounting the virtual disks and ISO on a RAM disk on the same server as the hypervisor is running on would be worth my while. I can dedicate a server to this VM and 32GB of RAM in the system should be adequate to do the trick I'd guess. (1GB hypervisor OS, 28GB RAM disk and 2GB for the VM is < the 32GB available to me) Since hosting a RAM disk within ESX does not seem possible I'm open to trying KVM/Xen/Hyper-V. KVM would probably be my first choice of these three. Anyone out there tried this? Bear in mind this is purely for a test run of the installer, the VM will be discarded as soon as the test is completed so I'm not worried about losing data from the remote possibility of a power failure.

  Read the article

• Virus cleanup + dying drive = XP Automatic Updates crashing in esent.dll

  - by quack quixote

  Background I'm doing system recovery on an old WinXP SP1 system brought to me on suspicion of virus infection. After taking preliminary backups, I used MalwareBytes to detect and clean the infection. I might've even gotten it all. In the process, I've discovered (a) the system drive is showing signs of impending failure, and (b) the owner has been using the system's old crusty IE-6 instead of the up-to-date Firefox I've provided for him. So naturally, thinking I had a relatively stable system, I tried to hit the Windows Update site to install IE-8, in case further training doesn't stick. The update site told me it needed to update the installer, and I started that process. Soon after, wuauclt.exe started crashing, reporting addresses in module esent.dll. There's a Microsoft KB (910437) on a problem with that DLL, so I downloaded the hotfix and installed. The crashing did not stop. I attempted to install SP3 from the offline installer, but that didn't fix the issue either. The system is reporting a few hard drive / IDE controller errors, but they don't correlate to the crashes, so they aren't the direct cause. I've also attempted to rollback to the time between the infection removal and the first crashes, but that doesn't help. Question The hotfix I tried to install dealt with problem in transaction logs of the Extensible Storage Engine (ESE) database. I suspect this issue is similar, but that the database itself (whatever the ESE database is) is corrupted. Is there a way to clean or clear this database so that system operation returns to normal? Can someone enlighten me as to what the ESE database actually is, and where it resides? Can I just locate some files and delete them to bring this under control?

  Read the article

• Error 0x80073cf9 when installing or updating apps from windows store

  - by cmorse

  On my Windows 8 desktop I keep getting error 0x80073cf9 when I try to install or update an app from the windows store. In the installings apps pane it just says "This app wasn't installed -- view details" and when I select that it says "Something happened and this app couldn't be installed. Please try again. Error code: 0x80073cf9" I am using the built-in windows firewall and antivirus. And my laptop is able to install updates when it is on the same network. This is what winstore.log shows when I try to update the maps app: 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] *********************************************************************** 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Process name: C:\Windows\system32\taskhost.exe 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] User name: Desktop\User 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Computer name: desktop 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Windows build: 9200.16424.amd64fre.win8_gdr.120926-1855 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Client version: 615 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011428] CWSTileUpdateHandler::Worker: Broker is handling badge updates. 2012-10-18 15:31:47.554, _Info_ WS [00002572:00008200] CProgressDispatcher::OnProgress: AppId = 97a2179c-38be-45a3-933e-0d2dbf14a142, PFN = Microsoft.BingMaps_8wekyb3d8bbwe, InstallPhase = 1, PhasePercent = 0, TotalPercent = 0 2012-10-18 15:31:47.558, _Warning_ WS [00002572:00008200] CDownloadProgress::IDownloadCompletedCallback::Invoke: Download complete result 0x80073cf9 for Microsoft.BingMaps_8wekyb3d8bbwe 2012-10-18 15:31:47.559, _Error_ WS [00002572:00008200] CActionItem::_DoDownload: Download failed for 97a2179c-38be-45a3-933e-0d2dbf14a142, hr=0x80073cf9 2012-10-18 15:31:47.560, _Info_ WS [00002572:00008200] CActionItem::_DoDownload: Notifying progress handlers of download failure for 97a2179c-38be-45a3-933e-0d2dbf14a142, hr=0x80073cf9 2012-10-18 15:31:47.560, _Error_ WS [00002572:00008200] CProgressDispatcher::OnError: PFN = Microsoft.BingMaps_8wekyb3d8bbwe, InstallPhase = 1, hrError = 0x80073cf9

  Read the article

• Spring-mvc project can't select from a particular mysql table

  - by Dan Ray

  I'm building a Spring-mvc project (using JPA and Hibernate for DB access) that is running just great locally, on my dev box, with a local MySQL database. Now I'm trying to put a snapshot up on a staging server for my client to play with, and I'm having trouble. Tomcat (after some wrestling) deploys my war file without complaint, and I can get some response from the application over the browser. When I hit my main page, which is behind Spring Security authentication, it redirects me to the login page, which works perfectly. I have Security configured to query the database for user details, and that works fine. In fact, a change to a password in the database is reflected in the behavior of the login form, so I'm confident it IS reaching the database and querying the user table. Once authenticated, we go to the first "real" page of the app, and I get a "data access failure" error. The server's console log gets this line (redacted): ERROR org.hibernate.util.JDBCExceptionReporter - SELECT command denied to user 'myDbUser'@'localhost' for table 'asset' However, if I go to MySQL from the shell using exactly the same creds, I have no problem at all selecting from the asset table: [development@tomcat01stg]$ mysql -u myDbUser -pmyDbPwd dbName ... mysql> \s -------------- mysql Ver 14.12 Distrib 5.0.77, for redhat-linux-gnu (i686) using readline 5.1 Connection id: 199 Current database: dbName Current user: myDbUser@localhost ... UNIX socket: /var/lib/mysql/mysql.sock -------------- mysql> select count(*) from asset; +----------+ | count(*) | +----------+ | 19 | +----------+ 1 row in set (0.00 sec) I've broken down my MySQL access settings, cleaned out the user and re-run the grant commands, set up a version of the user from 'localhost' and another from '%', making sure to flush permissions.... Nothing is changing the behavior of this thing. What gives?

  Read the article

• Is execution of sync(8) still required before shutting down linux?

  - by Amos Shapira

  I still see people recommend use of "sync; sync; sync; sleep 30; halt" incantations when talking about shutting down or rebooting Linux. I've been running Linux since its inception and although this was the recommended procedure in the BSD 4.2/4.3 and SunOS 4 days, I can't recall that I had to do that for at least the last ten years, during which I probably went through shutdown/reboot of Linux maybe thousands of times. I suspect that this is an anachronism since the days that the kernel couldn't unmount and sync the root filesystem and other critical filesystems required even during single-user mode (e.g. /tmp), and therefore it was necessary to tell it explicitly to flush as much data as it can to disk. These days, without finding the relevant code in the kernel source yet (digging through http://lxr.linux.no and google), I suspect that the kernel is smart enough to cleanly unmount even the root filesystem and the filesystem is smart enough to effectively do a sync(2) before unmounting itself during a normal "shutdown"/"reboot"/"poweorff". The "sync; sync; sync" is only necessary in extreme cases where the filesystem won't unmount cleanly (e.g. physical disk failure) or the system is in a state that only forcing a direct reboot(8) will get it out of its freeze (e.g. the load is too high to let it schedule the shutdown command). I also never do the "sync" procedure before unmounting removable devices, and never hit a problem. Another example - Xen allows the DomU to be sent a "shutdown" command from the Dom0, this is considered a "clean shutdown" without anyone having to login and type the magical "sync; sync; sync" first. Am I right or was I lucky for a few thousands of system shutdowns?

  Read the article

• How to organise storage for media content such as video and music?

  - by thor

  Currently, we have a single server hosting all content: music, video and software. This content is downloaded by users through HTTP. Now free space is coming to an end and we are exploring different ways of extending our storage capacity. We want to do it cheap, simple and reliable (protected from disk/ server faults). Currenly, we see two ways: Add a couple of cheap servers with 4 disks (RAID1 ?), run some distributed file-system on top, like GlusterFS. Pros: hopefully, we will see all our disks as single flat file system, just dump content into it and be done. Cons: could be tricky in configuration and handling of faults. Add a couple of cheap servers, all running HTTP servers. Each piece of content (be it a music file or video) is placed on randomly selected two servers. Pros: don't have to deal with RAID, as content is duplicated; single server failure does not bring down any part of content; doubled distribution capacity (as any signle file could be downloaded from any of two servers hosting it). Cons: requires some scripting on part of distribution of content, adding/ removing servers. Do we miss any other ways? Which of the aforementioned options seems to be the best?

  Read the article

• LG LW20 Express won't boot after hdd replace

  - by Mika

  My old laptop (LG LW20 Express) got a hdd failure and I replaced the hdd. Now the laptop won't boot from cd or usb. I'm trying to install ubuntu on it. When I turn the laptop on it shows me the startup screen but when it should be the time to load operating system it just gives a black screen and starts over. This loop continues until I shut down the laptop. I created the usb boot drive following this guide https://help.ubuntu.com/community/Installation/FromUSBStick/ I used my boot cd to install ubuntu on this machine I'm using right now. So at least the cd should work. From the BIOS I can see that my newly installed hdd is recognized and put as a secondary master. Also the cd and removable media are in the boot list before hdd. The laptop runs pretty hot. The fan is at full speed pretty soon after the laptop is turned on. Earlier I suspected that it would have been the almost broken hdd that would have produced that heat but there obviously is something else also. Any ideas what to check?

  Read the article

• Can't upgrade NVIDIA GeForce 310M display driver on Acer Aspire 5745PG

  - by Emerson

  I've been for days already trying to update my video driver. I have an Acer Aspire 5745PG with a "NVIDIA GeForce 310M" board, and I was trying to run Sony Vegas video editor with Boris Continunn plugins. It happened that some of the plugins, like BCC Text Extrude wouldn't work, showing the message "Insufficient depth resolution to run Blue". I then read somewhere that updating the display driver would do the trick. That was when my nightmares started, I lost already good 3 nights trying to sort this out, without success :( The display driver that was before (and that I current have after restoring) was the version 8.16.11.8997. First thing I tried was downloading the 8.17.12.6619 driver directly from Acer, which was shown as the latest version from Acer website: http://support.acer.com/product/default.aspx?modelId=2466 Running it would say "Diver Package Failure - Setup failed to read the required Display Driver to be used with this package" I then tried directly the NVIDIA own driver, which the latest was version 296.10: http://us.download.nvidia.com/Windows/296.10/296.10-notebook-win7-winvista-64bit-international-whql.exe That gave me similar error message :/ So after some researching I found out that some people had the same issue and they had to change the configuration file to allow the installer to recognize this NVIDIA board: http://forums.nvidia.com/index.php?showtopic=222904 That topic said to look for the "Device Instance Id" property of the "NVIDIA GeForce 310M" display , which I couldn't find, instead I found the "Hardware Id", which seemed to be the right one. I followed the instructions and changed the inf file first for the Acer installation, and after for the NVIDIA own driver. It actually managed to go ahead with the installation in both instances, but the only thing I got was a black screen, while the computer still apeared to be running fine. I had to hard reset, and then it would come back with generic vga driver. I could only get my display back using the recovery function. I imagine thousands of this notebook was sold, and it can't have its driver updated?? Could someone help me with this?? Thanks Echo

  Read the article

• SVN Authentication with LDAP and Active Directory

  - by Alex Holsgrove

  I am having a few problems getting SVN authentication to work with LDAP / Active Directory. My SVN installation works fine, but after enabling LDAP in my apache vhost, I just can't get my users to authenticate. I can use a selection of LDAP browsers to successfully connect to Active Directory, but just can't seem to get this to work. SVN is setup in /var/local/svn Server is svn.domain.local For testing, my repository is /var/local/svn/test My vhost file is as follows: <VirtualHost *:80> ServerAdmin [email protected] ServerAlias svn.domain.local ServerName svn.domain.local DocumentRoot /var/www/svn/ <Location /test> DAV svn #SVNListParentPath On SVNPath /var/local/svn/test AuthzSVNAccessFile /var/local/svn/svnaccess AuthzLDAPAuthoritative off AuthType Basic AuthName "SVN Server" AuthBasicProvider ldap AuthLDAPBindDN "CN=adminuser,OU=SBSAdmin Users,OU=Users,OU=MyBusiness,DC=domain,DC=local" AuthLDAPBindPassword "admin password" AuthLDAPURL "ldap://192.168.1.6:389/OU=SBSUsers,OU=Users,OU=MyBusiness,DC=domain,DC=local?sAMAccountName?sub?(objectClass=*)" Require valid-user </Location> CustomLog /var/log/apache2/svn/access.log combined ErrorLog /var/log/apache2/svn/error.log </VirtualHost> In my error.log, I don't seem to get any bind errors (should I be looking elsewhere?), but just the following: [Thu Jun 21 09:51:38 2012] [error] [client 192.168.1.142] user alex: authentication failure for "/test/": Password Mismatch, referer: http://svn.domain.local/test/ At the end of "AuthLDAPURL", I have seen people using TLS and NONE but neither seem to help in my case. I have the ldap modules loaded and have checked as much as I know, so any help would be most welcome. Thanks

  Read the article

• Network Load Balancing and AnyCast Routing

  - by user126917

  Hi All can anyone advise on problems with the following? I am planning on installing the following setup on my estate: I have 2 sites that both have a large amount of users. Goals are to keep things simple for the users and to have automatic failover above the database level. Our Database will exist at the primary site and be async mirrored to the secondary site with manual failover procedures.The database generate sequential ID's so distributing it is not an option. I plan to site IIS boxes at both sites with all of the business logic on them and heavy operations. The connections to SQL will be lightweight and DB reads will be cached on IIS. On this layer I plan to use Windows network load balancing and have the same IP or IPs across all IIS boxes at both sites. This way there will be automatic failover and no single point of failure. Also users can have one web address regardless of which site they are in automatically be network load balanced to their local IIS. This is great but obviously our two sites are on different subnets and as this will be one IP address with most of our traffic we can't go broadcasting everything across the link between the sites. To solve this problem we plan to use AnyCast routing over our network layer to route the traffic to the most local box that is listening which will be defined by the network load balancing. Has anyone used this setup before? Can anyone think of any issues with this? Also some specifics I can't find anywhere at the moment. If my Windows box is assigned an IP and listening on that IP but network load balancing is not accepting specific traffic then will AnyCast route away from that? Also can I AnyCast on a socket level?

  Read the article

• Intermittent extrememly long response times when downloading documents

  - by pap

  I have a Java web application running om Tomcat 7 with an Apache httpd 2.2 fronting with mod_jk/AJP. One part of the application is serving files (up to 4mb size). Now, normally this all runs very smooth with stable, low response-times. However, in rare instances (<0.1% of downloads), the downloadtime will go beyond 1 minute. After activating the ThreadStuckValve in Tomcat, I can see that the long responses seem to be stuck at org.apache.tomcat.jni.Socket.sendbb(Native method) i.e network I/O. At most, these long-running downloads take 5 minutes, which I strongly suspect is because of the default 300 second timout in Apache 2.2 (http://httpd.apache.org/docs/2.2/mod/core.html, "TimeOut directive"). To me, this looks like network problems. The Apache timeout (if that is what is kicking in at the 5 minute mark) indicates that ACK packets are not being transmitted correctly. My questions are what could be causing this? Closed browser at receiving end but socket not signaled as closed properly? Packet loss or some other network failure in transit? Where would I start troubleshooting this? We're running Tomcat and Apache on Windows server 2008-R2 in a vmware virtualized server.

  Read the article

• Acer Aspire One -- strange battery problem, charges only up to ~90%

  - by houbysoft

  I have this strange problem on the acer aspire one d250. It happened already once before, stayed for about two weeks, and then "fixed itself". The problem is as follows: the battery can't seem to get fully charged; ie the indicator is stuck at about 90% (it's probably not a software problem -- I have ArchLinux and Windows 7 installed and both report exactly the same) and it never passes that value, but it still shows the status as "charging" (I tried everything I could think of -- leaving it charging for extremely long amounts of time, doing a few complete charge-recharge cycles, removing/reinserting the battery, cleaning the connectors, even updating the BIOS, etc., and nothing helped). Also, when it is getting charged, it charges pretty fast until about 70% and then progresses extremely slowly. The battery holds the charge that appears on the battery indicator normally. Just can't get the battery to charge fully -- I can't get it past the 90%. At first I thought this would be a simple battery failure (even if the computer is not that old, about 6-7 months), but as I mentioned it happened once before, and then one day it fixed itself. I tried contacting Acer about this, but the support was not helpful, completely stupid, it seemed like they used canned responses, the usual. Any thoughts on how to fix this?

  Read the article

• SSL connection error for only one site (of many) on server

  - by Matt Lacey

  I have a server running many websites, each with SSL. One of the sites is now refusing connections over SSL. This was previously working and I'm looking for assistance in determining what has been changed. Here's the situation: http://site1.com/ - works https://site1.com/ - works http://site2.com/ - works https://site2.com/ - Doesn't work (but did previously) Both sites are on the same server (Win Server 2003 SP2 - IIS6) Both sites use certificates from the same authority and are both valid (according to IIS). As far as I can tell, both sites have certificates configured identically in IIS. (Checked by a manual/visual check of properties, side by side) Through use of OpenSSL I can see that there's a "ssl handshake failure" when trying to connect to site2 using https. What could be the cause of this? How can I investigate further? Without SSL connections being available to this site, users are unable to log in or register. :( disclaimer: I'm not a server admin and not responsible for the box. Yes, there are wider issues here but I need to get this working again first.

  Read the article

• Better logging for cronjob output using /usr/bin/logger

  - by Stefan Lasiewski

  I am looking for a better way to log cronjobs. Most cronjobs tend to spam email or the console, get ignored, or create yet another logfile. In this case, I have a Nagios NSCA script which sends data to a central Nagios sever. This send_nsca script also prints a single status line to STDOUT, indicating success or failure. 0 * * * * root /usr/local/nagios/sbin/nsca_check_disk This emails the following message to root@localhost, which is then forwarded to my team of sysadmins. Spam. forwarded nsca_check_disk: 1 data packet(s) sent to host successfully. I'm looking for a log method which: Doesn't spam the messages to email or the console Don't create yet another krufty logfile which requires cleanup months or years later. Capture the log information somewhere, so it can be viewed later if desired. Works on most unixes Fits into an existing log infrastructure. Uses common syslog conventions like 'facility' Some of these are third party scripts, and don't always do logging internally. UPDATE 2010-04-30 In the process of writing this question, I think I have answered myself. So I'll answer myself "Jeopardy-style". Is there any problem with this method? The following will send any Cron output to /usr/bin//logger, which will send to syslog, with a 'tag' of 'nsca_check_disk'. Syslog handles it from there. My systems (CentOS and FreeBSD) already handle log rotation. */5 * * * * root /usr/local/nagios/sbin/nsca_check_disk 2>&1 |/usr/bin/logger -t nsca_check_disk /var/log/messages now has one additional message which says this: Apr 29, 17:40:00 192.168.6.19 nsca_check_disk: 1 data packet(s) sent to host successfully. I like /usr/bin/logger , because it works well with an existing syslog configuration and infrastructure, and is included with most Unix distros. Most *nix distributions already do logrotation, and do it well.

  Read the article

• Mystery 0xc0000142 error on starting java from a service, as a different user.

  - by cpf

  This is a very convoluted setup, but effectively this is what goes down: Manager service (which I don't have control over) running as admin user X starts my executable, which then starts Java as user Y using the standard c# StartInfo.Username/Password controls. Now, from a basic (not elevated or anything, just admin) command prompt I can run that executable, and Java pops up and works fine, running perfectly under the user it should be. When the service runs the same executable, however, Java silently fails. The only hint I see is this series of events in the event viewer: Service starts "Application popup: java.exe - Application Error : The application was unable to start correctly (0xc0000142). Click OK to close the application. " (googling this reveals a lot of scam sites telling me to use their "free antivirus to fix 0xc0000142 errors easy!"... sigh) Service stops (the java shutdown propagated, which is supposed to happen) And here's what process explorer has for the failure: As you can see, everything shows as a success. Now, I think this might have something to do with the permissions (the user java.exe is running under has traverse permission for the entire drive and full permissions to Directory A, which is where the .jar is), but I just can't fathom how something that works fine from the command line (and, this is an upgrade, the previous system without the user-switching aspect works fine from the service) can fail with such a cryptic message and little showing up in logs.

  Read the article

• python mysqldb - mysql server gone away - can't reconnect

  - by david.barkhuizen

  When attempting to import a bunch of data into mysql tables using python and mysqldb, I run into the following error '2006 - mySQL Server has gone away', and then I am unable to reconnect again within the script. I am iniitially re-using a connection object across transactions ( delineated by conn.commit() ), then when I first encounter this exception, if I create a new connection by calling MySQLdb.connect(), this new connection also fails with the same exception. This error does not occur immediately, I can pump a fair amount of data into the db, but then faithfully occurs after I have inserted a couple thousand records, so roughly once the db has committed a certain transaction volume, it always falls over like this. If I rerun the script, WITHOUT restarting the db server. then it resumes where it left off, pumps in some data, then falls over again. Before recommendations to change time-out timings, does anyone know why I am not able to establish a new connection after the initial failure ? - Even if I try a couple of times waiting a couple of seconds between each. (btw, I'm running Windows 7, mysql server 5.1.48, mysqldb 1.2.3.gamma.1, python 2.6)

  Read the article

• The Wifi is working fine but no internet connection in Windows 8 [migrated]

  - by Ali

  I'm currently having a Problem with my msi GT70 laptop. my laptop is running windows 8 and yesterday it requested a Restart to Update. after the Restart and the update I tried to surf the net through google chrome, the WiFi connection is perfect but the page I tried to access is not loading at all, after a while it shows failure to load page. I disabled and reenabled the WiFi chip through the device manager but still no internet connection. I uninstalled and reinstalled the drivers, still no internet. I updated the Driver of the wifi, still no internet, I even went to Wifi configuration and tried to change the DNS and reset it back to automatically, still no Luck.. I'm really lost I don't know what to do, I don't want to go deep and play with Laptop DNA "aka: registry file" and screw things up. I really appreciate any help in this matter. thanks in advance. Note: I tried to access many pages but no luck. I even tried Firefox, Opera, even ie still no luck. The internet is working fine on my tablet and cellphone, except for the Laptop.

  Read the article

• mysqld refusing connections from localhost

  - by Dennis Rardin

  My mail server (Ubuntu 10.04) uses mysql for virtual domains, virtual users. For some reason, mysqld has started refusing connections from localhost. I see these in the mail server log: Oct 6 00:31:14 apollo postfix/trivial-rewrite[16888]: fatal: proxy:mysql:/etc/postfix/mysql-virtual_domains.cf(0,lock|fold_fix): table lookup problem and: Oct 7 13:39:15 apollo postfix/proxymap[25839]: warning: connect to mysql server 127.0.0.1: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 I also get the following in auth.log: Oct 6 22:33:31 apollo mysqld[31775]: refused connect from 127.0.0.1 Telnet to the local port: root@apollo:/var/log/mysql# telnet localhost 3306 Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Connection closed by foreign host. root@apollo:/var/log/mysql# I am not sure why this started happening, but there was a disk failure in a RAID 1 pair a bit earlier that day. So it's possible I have a damaged config file or something. But mail was working for at least an hour after the drive event, so who knows for sure? phpmyadmin works fine, and the databases themselves look like they're intact. I think/believe that selinux and iptables are disabled and not running. So ... why is mysqld refusing connections from localhost? What should I check? What processes might cause this if a .conf file or possibly a binary was damaged? Which other log files might contain clues? I've enabled "general logging" in /etc/mysql/my.cnf, but I get no interesting or informative entries there. Thanks, m00tpoint

  Read the article

• I get "An error occurred while Windows was synchronizing with [name of time server]." when trying t

  - by ChrisF

  Prompted by the answers to this question I decided to give the Windows built in time synchronisation another go. However, no matter what time server I use I get this error: "An error occurred while Windows was synchronizing with [name of time server]." The help suggests the following as reasons for failure: You are not connected to the Internet. Establish an Internet connection before you attempt to synchronize your clock. Your personal or network firewall prevents clock synchronization. Most corporate and organizational firewalls will block time synchronization, as do some personal firewalls. Home users should read the firewall documentation for information about unblocking network time protocol (NTP). You should be able to synchronize your clock if you switch to Windows Firewall. The Internet time server is too busy or is temporarily unavailable. If this is the case, try synchronizing your clock later, or update it manually by double-clicking the clock on the taskbar. You can also try using a different time server. The time shown on your computer is too different from the current time on the Internet time server. Internet time servers might not synchronize your clock if your computer's time is off by more than 15 hours. To synchronize the time properly, ensure that the date and time settings are set close to your current time in the Date and Time Properties in Control Panel. Now the first reason is clearly wrong - I am connected to the internet. I can see the 2nd being the most likely cause. I have Sygate Personal Firewall running, but it normally asks if something it trying to connect for the first time. Does anyone know I can unblock the NTP protocol - or at least check if it is blocked?. I don't think it's #3 or #4 as I've tried a number of different servers including the one currently used by Atomic Clock Sync. Though if someone knows the address of a UK time server I can double check this.

  Read the article

• Laptop Most Likely to Have Good Driver Support

  - by ShabbyDoo

  Through numerous bad experiences, I have learned that the most likely cause of laptop "failure" is the lack of updated drivers for new operating systems. As an example, I have a perfectly good Thinkpad T42 at home which runs Windows 7 just fine for my purposes except that no compatible ATI video drivers are available, and the generic drivers have flicker effects. I recently saw an ASUS laptop which looked quite nice except that I would be beholden to them to release ATI video driver updates customized for it. And, I can't trust them to do that for more than six months. What laptops (manufacturer/line) should I consider so that I could expect at least a couple years of frequent updates? I plan on running Windows 7 and installing whatever successor comes out. I like Intel components (especially WiFi) because I can install their drivers directly from them, and they have a long history of providing updates for years after shipping a particular component. More generally, components from companies which are likely to update drivers frequently are good as long as I can install the component manufacturer-provided drivers without laptop-specific customization (like the ATI drivers). Also, if a component can be replaced easily, I am less concerned. For example, Dell stopped pumping out updated drivers for one of its mini-PCI WiFi cards. The solution was to buy an Intel replacement on eBay for $12! That's fine. I can deal with that. So, what laptops should I consider so that I'm not likely to be stuck between a rock and a hard place?

  Read the article

• Turning on Bluetooth disables wifi on Yoga 2

  - by Yostage

  I have a Lenovo Yoga 2. The moment that I turn on bluetooth, the wifi drops out - I lose connection, and connecting again shows "connection failed". If I turn the bluetooth off, wifi can reestablish fine. I've tried lots of different combinations of drivers for both the wifi and the bluetooth, but no combination has has changed this behavior yet. I've read some speculation that the cards have insufficient shielding, but that seems like kind of a large flaw to ship with. I've tried with a Carbon X1, a Yoga 2 Pro, and a Yoga 2 all next to each other on the desk while running InSSIDer. The X1 and the Y2P don't lose wifi connection when the bluetooth turns on, but the Y2 does immediately. The Y2P and the Y2 are running the same drivers for bluetooth and wifi, and appear to have the same wireless card internally. During the failure state, InSSIDer still sees signal strength for my network, but I cannot connect to it. stats: the card that comes in the laptop is an Intel Wireless-N 7260 Intel Bluetooth driver is at 17.0.1401.422 Intel Wireless driver is at 17.0.2.5 Windows 8.1 x64 Home wifi is a Medialink MWN-WAPR150N

  Read the article

• Server 2008 Print Redirection is failing but only on 16Bit apps

  - by ian

  the main programmer for SoEasyAccounting and we are installing to Server 2008 Standard service pack 1. We install to 2003 with no problems. Important to understand that the print failure only happens in certain circumstances: Note: We use a standard Windows printer selection box to choose the printer Terms used Superbase = a program language that uses ntvdm.exe (Windows process hosting 16 bit apps) Local Printer = printing to a driver loaded onto the Server 2008 Redirect Printer = printing to a automatically established remote printer through an RDP connection Printing Scenarios Server 2008 - 1: Print from notepad to a Redirected Printer = works Server 2008 - 2: Print from Superbase to a Local Printer = works Server 2008 - 3: Print from Superbase to a Redirected Printer = fail Server 2003 - 4: Print from Superbase to a Redirected Printer = works Results The print causes a message in the drivers print queue of Local Downlevel Document, no print though and Superbase recognises that the "Print command failed". Eventvwr has no related issues to the print fail Any help greatly appreciated. So far 2 days spent trying to resolve and here goes my weekend :( unless someone has an idea :) Things I have Tried i. Switching on/off Easy print ii. Loading copy of redirected driver on server

  Read the article

• Missing whole disk device in OpenSolaris

  - by Jeff Mc

  I have begun experimenting with Solaris and ZFS as a NAS. All was going very smoothly until I had a drive failure. When I replaced the drive, I no longer have a device file mapped to the whole disk. /dev/dsk/c7t3d0 does not exist but c7t2d0 and c7t4d0 both do. Also the sd@3,0:wd file under the /devices/ tree is non-existent. Do I have to prepare/partition the disk somehow to cause the whole disk device to exist? Here are a few outputs that might be useful. jeffmc@ats-ds2:/dev/dsk$ zpool status pool: datapool state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using 'zpool online'. see: http://www.sun.com/msg/ZFS-8000-2Q scrub: none requested config: NAME STATE READ WRITE CKSUM datapool DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 c7t2d0 ONLINE 0 0 0 c7t3d0 UNAVAIL 0 0 0 cannot open mirror-1 ONLINE 0 0 0 c7t4d0 ONLINE 0 0 0 c7t5d0 ONLINE 0 0 0 jeffmc@ats-ds2:/dev/dsk$ zpool replace datapool c7t3d0 cannot open 'c7t3d0': no such device in /dev/dsk must be a full path or shorthand device name jeffmc@ats-ds2:/dev/dsk$ sudo format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@0,0 1. c7t1d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@1,0 2. c7t2d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@2,0 3. c7t3d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@3,0 4. c7t4d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@4,0 5. c7t5d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@5,0

  Read the article

• Virus cleanup; Windows Automatic Updates service crashes in esent.dll

  - by quack quixote

  Background I'm doing system recovery on an old WinXP SP1 system brought to me on suspicion of virus infection. After taking preliminary backups, I used MalwareBytes to detect and clean the infection. I might've even gotten it all. In the process, I've discovered (a) the system drive is showing signs of impending failure, and (b) the owner has been using the system's old crusty IE-6 instead of the up-to-date Firefox I've provided for him. So naturally, thinking I had a relatively stable system, I tried to hit the Windows Update site to install IE-8, in case further training doesn't stick. The update site told me it needed to update the installer, and I started that process. Soon after, wuauclt.exe started crashing, reporting addresses in module esent.dll. There's a Microsoft KB (910437) on a problem with that DLL, so I downloaded the hotfix and installed. The crashing did not stop. I attempted to install SP3 from the offline installer, but that didn't fix the issue either. The system is reporting a few hard drive / IDE controller errors, but they don't correlate to the crashes, so they aren't the direct cause. I've also attempted to rollback to the time between the infection removal and the first crashes, but that doesn't help. Question The hotfix I tried to install dealt with problem in transaction logs of the Extensible Storage Engine (ESE) database. I suspect this issue is similar, but that the database itself (whatever the ESE database is) is corrupted. Is there a way to clean or clear this database so that system operation returns to normal? Can someone enlighten me as to what the ESE database actually is, and where it resides? Can I just locate some files and delete them to bring this under control?

  Read the article

• Configuring SASL support in libmemcached

  - by John Keyes

  I'm trying to build libmemcached with SASL support on OS X Mountain Lion. I have built memcached (1.4.15) with SASL support: $ memcached -S -vv Initialized SASL. slab class 1: chunk size 96 perslab 10922 ... slab class 42: chunk size 1048576 perslab 1 <17 server listening (binary) <18 server listening (binary) <19 send buffer was 9216, now 3728270 <20 send buffer was 9216, now 3728270 <19 server listening (udp) <20 server listening (udp) ... I am trying to build libmemcached with SASL support too. I have tried the following: $ ./configure --prefix=/usr/local \ --with-memcached-sasl=/usr/local/bin/memcached ... $ ./configure --prefix=/usr/local \ --with-memcached-sasl="/usr/local/bin/memcached -S" ... But the resulting configuration summary is the same for both: Configuration summary for libmemcached version 1.0.11 * Installation prefix: /usr/local * System type: apple-darwin12.2.0 * Host CPU: x86_64 * C Compiler: i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00) * C Flags: -O2 -Werror -Wall -Wextra -std=c99 -Wbad-function-cast -Wmissing-prototypes -Wnested-externs -Woverride-init * C++ Compiler: i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00) * C++ Flags: -O2 -Werror -Wall -Wextra -Wpragmas -D_FORTIFY_SOURCE=2 -Waddress -Wchar-subscripts -Wcomment -Wctor-dtor-privacy -Wfloat-equal -Wformat=2 -Wmissing-field-initializers -Wmissing-noreturn -Wnon-virtual-dtor -Wnormalized=id -Woverloaded-virtual -Wpointer-arith -Wredundant-decls -Wshadow -Wshorten-64-to-32 -Wsign-compare -Wstrict-overflow=1 -Wswitch-enum -Wundef -Wunused-variable -Wwrite-strings -fwrapv -ggdb * CPP Flags: -I/usr/local/include * Assertions enabled: no * Debug enabled: no * Warnings as failure: no * SASL support: Am I doing something incorrectly? Thanks.

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >