Search Results

Search found 10207 results on 409 pages for 'ethernet switch'.

Page 27/409 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Sizing Switches for Storage and Production

  - by Untalented

  Couple questions. Should you always completely separate the storage network switches from production switches or are VLANs fine to segment this traffic? Is there a golden rule here? How do you properly size a switch for your environment based on the specifications the manufacturer provide (Throughput, Forwarding Throughput, Stacking Throughput, Max Mac)? If you have two switch options and one has a maximum Mac address of 8,000 vs. another with 16,0000. What does this really mean to me? How do make sure one vs. another is sized properly for me? Besides VLAN and Jumbo Frame support, is there any other "Must" haves for a virtual environments production or storage networks? There is a wealth of knowledge on sizing SANs and such, but this seems equally important and it's quite challenging to find as much information. -- Just to add some tidbits of information for the environment. This setup above is referring to the data centers which supports two different locations which have about 100 users between the two in total. The storage traffic will be iSCSI and will be 3 ESXi Hosts and one SAN housing about 2.7TB of data. Since there is currently no storage network in place (no SAN), I'm having a hard time regarding #2 to really determine what backplane throughput and switch specifications will be sufficient.

  Read the article

• SCVMM 2012 R2 - Installing Virtual Switch Fails with Error 2916

  - by Brian M.

  So I've been attempting to teach myself SCVMM 2012 and Hyper-V Server 2012 R2, and I seem to have hit a snag. I've connected my Hyper-V Host to SCVMM 2012 successfully, and created a logical network, logical switch, and uplink port profile (which I essentially blew through with the default settings). However when I attempt to create a virtual switch on my Hyper-V host, I run into an issue. The job will use my logical network settings I created to configure the virtual switch, but when it tries to apply it to the host, it stalls and eventually fails with the following error: Error (2916) VMM is unable to complete the request. The connection to the agent vmhost1.test.loc was lost. WinRM: URL: [h**p://vmhost1.test.loc:5985], Verb: [GET], Resource: [h**p://schemas.microsoft.com/wbem/wsman/1/wmi/root/virtualization/v2/Msvm_ConcreteJob?InstanceID=2F401A71-14A2-4636-9B3E-10C0EE942D33] Unknown error (0x80338126) Recommended Action Ensure that the Windows Remote Management (WinRM) service and the VMM agent are installed and running and that a firewall is not blocking HTTP/HTTPS traffic. Ensure that VMM server is able to communicate with econ-hyperv2.econ.loc over WinRM by successfully running the following command: winrm id –r:vmhost1.test.loc This problem can also be caused by a Windows Management Instrumentation (WMI) service crash. If the server is running Windows Server 2008 R2, ensure that KB 982293 (h**p://support.microsoft.com/kb/982293) is installed on it. If the error persists, restart vmhost1.test.loc and then try the operation again. Refer to h**p://support.microsoft.com/kb/2742275 for more details. I restarted the server, and upon booting am greeted with a message stating "No active network adapters found." I load up powershell and run "Get-NetAdapter -IncludeHidden" to see what's going on, and get the following: Name InterfaceDescription ifIndex Status ---- -------------------- ------- ----- Local Area Connection* 5 WAN Miniport (PPPOE) 6 Di... Ethernet Microsoft Hyper-V Network Switch Def... 10 Local Area Connection* 1 WAN Miniport (L2TP) 2 Di... Local Area Connection* 8 WAN Miniport (Network Monitor) 9 Up Local Area Connection* 4 WAN Miniport (PPTP) 5 Di... Ethernet 2 Broadcom NetXtreme Gigabit Ethernet 13 Up Local Area Connection* 7 WAN Miniport (IPv6) 8 Up Local Area Connection* 9 Microsoft Kernel Debug Network Adapter 11 No... Local Area Connection* 3 WAN Miniport (IKEv2) 4 Di... Local Area Connection* 2 WAN Miniport (SSTP) 3 Di... vSwitch (TEST Test Swi... Hyper-V Virtual Switch Extension Ada... 17 Up Local Area Connection* 6 WAN Miniport (IP) 7 Up Now the machine is no longer visible on the network, and I don't have the slightest idea what went wrong, and more importantly how to undo the damage I caused in order to get back to where I was (save for re-installing Hyper-V Server, but I really would rather know what's going on and how to fix it)! Does anybody have any ideas? Much appreciated!

  Read the article

• Problem with Jumbo Frames

  - by Spookyone

  Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: * D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU * Synology DS107+, Firmware 3.0-1337 * Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• Upgraded from fc10 to fc12 now I have eth0_rename, how do I get back to plain old eth0?

  - by shank

  I upgraded from Fedora 10 to Fedora 12. Unfortunately, my ethernet interface eth0 is now named eth0_rename. I'd like to get back to having it named plain old eth0. I googled a bit but the solution of removing the eth0 entry from /etc/udev/rules.d/70-persistent-net.rules seems to have no effect (I restarted the network service but didn't reboot). The interface works just fine although I could see a script or two having a problem with the format. So, it's more of an inconvenience thing than anything else. Any ideas? Thanks.

  Read the article

• Networking not working in Windows 7 - "The account specified for this service is different from the account specified for other services"

  - by tog22

  I have a homebuilt computer with a GA-Z68MA-D2H-B3 motherboard with a Realtek RTL8111E LAN chip. Ethernet was working fine in Windows 7 until I reinstalled this OS, but now it's stopped, while still working in other OSes. I've tried reinstalling drivers from both the Gigabyte and Realtek sites to no avail; I've also plugged in and installed an Asus USB-N13 wifi dongle and this doesn't work oddly. How can I diagnose and fix this issue? In 'Network and Sharing Center' says "The account specified for this service is different from the account specified for other services running in the same process" under the heading 'Unknown'. Following the advice at http://www.sevenforums.com/network-sharing/130159-dependency-service-group-failed-start.html#post1122627 I've gone to 'Control Panel= Admin Tools= Services' and ensured the services listed at that URL are started (one - IIRC 'Come+ Event System' refused to start as user 'Local services' so I've had to set it to log on with the 'Local system account'... I suspect this may be part of the problem).

  Read the article

• Under what circumstances can/will a 10BASE-T device slow down a 100BASE-T or faster network?

  - by Fred Hamilton

  Suppose I have a 10BASE-T device, but everything else on my network is 100BASE-T or faster. When I attach the 10Mbit device, one of two things could happen: It could be passed through as 10BASE-T, making whatever it's connected to slow down to 10BASE-T, or It could be converted to a higher speed. I'm looking for all the plausible examples where #1 could happen; where attaching this 10Mbit device will slow down other traffic. I sorta think it can't happen - that as soon as it comes into contact with other traffic it has to get retimed to be inserted into the higher rate traffic (so no slowdown aside from the extra bits from the connection), and that when it's not contacting other traffic, who cares if it's only 10Mbit? Basically I'd like a better understanding of any impact of inserting a slow device into a fast ethernet network.

  Read the article

• Why is the network speed on my Mac Pro (early 2009) so slow?

  - by Rafael

  I have a really weird networking issue on my Mac Pro (Early 2009). I can’t get higher network speeds than about 2MBit/s. It doesn’t matter if this is over AirPort or one of the Ethernet ports. An iMac and a Mac mini in the same network with almost the same configuration get about 25-30 MBit/s. I’ve read a couple of things about this on the official Apple forums, but there is no helpful information. Anyone else with Mac Pro network speed issues and who knows how to solve them?

  Read the article

• How to create a separated network to customers only?

  - by Valter Henrique

  I work in a company where we have a network ethernet and wi-fi, we would like to create a network where our customers could access our network but don't have access to our computer network. This access would be internet only, nothing more. The customers will not see our computers and the files that we share in our network. I have two routers, how can I do this ? A Cisco Linksys Wireless-N Broadband Router WRT160N V3 and a Netgear Wireless G Router WGR614 v9 and about firewalls there´s only windows firewalls in each computer by default.

  Read the article

• Is there a performance difference between Cat5 and Cat6 keystone blocks?

  - by Scott Anderson

  I'm going to be wiring my home for ethernet soon, and I've already decided that I want to use Cat6 cable to do it (faster speeds, better performance, etc). During the installation, I'd like to add wall-plates to certain rooms in my house, and the keystone blocks look like the best option for me. My question is: I've seen different keystone blocks on many cabling websites, some say Cat5e and some say Cat6. The Cat6 ones are slightly more expensive. Is there any noticeable performance gain from using a Cat6 keystone? To me, it just seems like the keystone really wouldn't matter, since it's basically like putting an RJ-45 end on a cable. Can I buy the cheaper Cat5e keystone blocks and still have the performance that Cat6 cable will give me? Thanks!

  Read the article

• LAN cable not connected, but it is

  - by Koen

  I have a Windows XP SP2 desktop PC. It connects to the internet with a LAN cable (there's a wireless router for my laptop in between). The problem should be software because: when i tried connecting the same LAN cable to my laptop it works when i plugin the LAN cable (onboard) the green light is on and the orange light flickers when i tried the other cable (that feeds the wireless router) i have the same problem it worked a few days ago, nothing specific changed I tried removing the ethernet card from the device manager, and windows automatically reinstalled it. What could cause this? What can I try?

  Read the article

• How can I hide my network connections in the task bar when I'm not connected?

  - by CodeSlave

  How can I hide my network connections (the PC with the red X icon on the task bar) when I'm not using a that connection. Typically, I switch back and forth between wireless and wide connections depending on my location, so I don't want to just simply disable the network device.

  Read the article

• Jumbo Frames on DIR-655

  - by Spookyone

  Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• Linux bonded Interfaces hanging periodically

  - by David

  I've several hosts that are showing problems with connectivity. When working from the command line, for example, typing is frozen for a second or so, then recovers - then it does it again. The most egregious example host would freeze (input) for 15-30 seconds, then recover and go out 5 seconds later. Switching cables didn't do anything - but removing one of the physical cables caused everything to clear up instantly (which why I think this is a network problem). Looking at the network I couldn't see any packets floating that would explain this. These ethernet interfaces (Gigabit Dell) were working normally previously, but since we moved the systems - and put them on a new set of switches - this has been a problem on multiple theoretically identically-configured hosts. The original switches were an HP Procurve 1810-24G and an HP Procurve 1800-24G connected with LLDP; the new switches are both Cisco SG 200-26, which I understand are rebranded Linksys switches. Is this caused by a problem with the switches? Is it the switch configurations? Are the Cisco switches incapable of handling this? I don't see where the configuration is located; I searched the usual /etc/sysconfig/network/devices but there's nothing in there about options (like mii polling) and nothing about the method of balancing the two. Searching scripts, I can't find anything in /etc/init.d/network either. The hosts are almost all Red Hat Enterprise Linux 5.x systems (5.6, 5.7) but some are Ubuntu Server 10.04.3 Lucid Lynx. I need help with both if it comes to that. UPDATE: We're also seeing some problems with servers on the original switches. The HP switches and the Cisco switches are also interconnected (temporarily); there is a cable run from one switch to the next. Pings on any of these hosts show about one ICMP packet out of every 5-6 getting dropped (timed out). Could there be an interaction between the two switches? Oh, and the hosts are using bonding with Balance-RR as the method.

  Read the article

• Sending a file to uCLinux

  - by Mike

  I have a board running uClinux, and I need to send a file to it, but I'm not sure how... I have a RS232 port, and Ethernet port with an IP address at my disposal, I can telnet to the board, but uCLinux doesn't have a built in FTP client. What sort of options do I have here for transferring files from my Windows 7 (or OpenSUSE) machine(s) to this board? EDIT I just found I have a TFTP server on it: # tftp BusyBox v0.60.5 (2012.07.09-14:05+0000) multi-call binary Usage: tftp [OPTION]... HOST [PORT] But I can't find any good information on how to use TFTP. And looking around google I'm seeing it's good for loading binary images, so I'm assume anything could be sent, but I'm not sure.

  Read the article

• Jumbo Frames on DIR-655

  - by Spookyone

  I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• Wired and Wireless Network Duplication

  - by Dave

  Howdy! Running into an issue when some of our client's have their laptop's connected via the wired ethernet network aswell as on the WLAN of the same network. There is know issues caused to the end clients.. BUT! Being a Managed Services Engineer i get pretty over the alerts that come through on our reports for machine's with the same hostname on the same network! We are not going to remove this monitoring because it does help a lot with detecting and stopping inferior users and things like that. So basically.. Question is, is there a way in Windows (third party programs welcome) to disable the wireless network when a wired network is connected and operational.. I know that Windows automticaly 'prefers' the wired network, however they are still both connected and therfore there is duplicate hostnames on the same network. Could also have stupid issues with DNS and things like that! Thanks!

  Read the article

• Invoking 'Hotkey Mode' in IO Gear's GCS632U KVM Switch

  - by Tim Visher

  Awhile ago I changed the switch port key to left control on my IO Gear USB Switch and I'd like to change it back to Scroll Lock. When I did this, I have some memory of believing that I had found an error in the documentation for the switch regarding how to enter Hotkey Mode. Per the instructions in the manual(PDF), I'm supposed to be able to enter Hotkey Mode by Holding Scroll Lock for 2 seconds, adding Minus on the keypad for one second, and then release Minus first and within a second release Scroll lock. Ignoring the strangeness and fragility of this process, I'm looking for confirmation that this indeed works for anyone else. I can't remember why I thought it was wrong but I clearly remember that I did (I even had a blog post that I was going to write about but it got lost in the sands of time). As an aside, I'd be interested in seeing if there is any way to force a reset for the switch without entering Hotkey Mode as that would do exactly what I'm trying to do and I wouldn't have to mess with Hotkey Mode. Thanks in advance!

  Read the article

• How to programatically sense the iPhone mute switch?

  - by Olie

  I can't seem to find in the SDK how to programatically sense the mute button/switch on the iPhone. When my app plays background music, it responds properly to the volume button without me having any code to follow that but, when I use the mute switch, it just keeps playing away. How do I test the position of mute? (NOTE: My program has its own mute switch, but I'd like the physical switch to override that.) Thanks!

  Read the article

• Two hosts on same subnet can't see each other

  - by Joey Hewitt

  I've got two routers with two separate public IP addresses on the same subnet, but I can't get them to talk to each other. Both are connected to the internet (ISP-provided gateway) via Ethernet ports provided by the landlord, but I don't have access to or knowledge of how those are physically connected or the protocols used to get back to the ISP. I can ping either from the outside, but they can't ping each other. Traceroutes in and out look the same, and they receive the same gateway over DHCP. I can ping other IPs on the subnet, so I assume this is not any sort of intentional isolation for security/privacy. Since I'm in a setup where my landlord provides internet and we don't have contact with the ISP, I can't really ask the ISP for help (doubt the landlord would know much either.) The situation is similar to the diagram at this question, but instead of the two servers, there's another router coming off the (presumed) switch, and I don't have access to the switch. I've tried giving them static routes to each other with the ISP internet gateway as the gateway, but that's not working. One is a Linksys WRT54GL running DD-WRT, the other is a Netgear WGR614v7, although I could get something more capable if necessary. I'd like to keep them each connected directly to the ISP on their WAN ports, but I can have an ethernet cable between them if necessary - I'm wondering if there's a way without that, and if there isn't, I'd appreciate advice on how to get that working. Sorry this is so nitpicky; there are reasons for all the constraints, but they don't apply to the real question, so I left them out. ;) Thank you!

  Read the article

• Failed to bring up eth1 in a dual ips solution in ubuntu

  - by lxyu

  I'm using ubuntu 12.04. I tried to assign two ips to two ethernet cards in my server. The content of /etc/network/interfaces is like this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 114.80.156.a netmask 255.255.255.224 gateway 114.80.156.b auto eth1 iface eth1 inet static address 114.80.156.c netmask 255.255.255.240 gateway 114.80.156.d a b c d have different values, which means the two ips are in different vlans. But I can only bring up eth0 with this command: $ /etc/init.d/networking restart RTNETLINK answers: File exists Failed to bring up eth1. ...done. I have checked the question here which shows the same problem like the one I encountered: Can only bring up one of two interfaces But it seems it's not really solved. And in my situation, I need the 2 ips to use 2 different gateways. So how to fix this problem? Edit1, changed the example config ip from 192.168.0.0/16 subnet to another 'real' subnet. Edit2, the purpose of doing this is fairly simple. Because the ip range I previous in don't have more room for new servers, and I have to move to another ip range. So I want to make the public servers bind to 2 ips for the transition period. I only have really limited knowledge about routing and subnet. @BillThor @rackandboneman, would you please give me some keywords or links on how to setup route for 2 ips? and @Mike Pennington, how do you know I speak chinese?

  Read the article

• Internet slowed down because of SQUID Server setup

  - by Ranjith Kumar

  Recently I have setup a squid server for our office. I have computer (A) with two ethernet cards, one for internet and the second one for local networkIt has Ubuntu server OS with squid-server and dhcp3-server installedI have added few iptable rules to work like a router and redirect all http traffic to 3128 port This link is my reference. Everything worked fine for 2 days. All of a sudden internet speed went down drastically. When I connected the internet cable to my laptop to test the internet speed it was fine. Again when I reconnected it back to computer A everything was normal. This happened 4 times in a week. Could anyone here please help me why the internet speed is going down and it becomes normal when I reconnect the cable. EDIT: Rebooting the system (computer A) didn't make a difference. I have changed iptables so that http traffic doesn't redirect to 3128 port any further, still no change in the internet speed. I think the problem is not with squid but with something else. Here are my iptable rules SQUID_SERVER="10.1.1.1" INTERNET="eth1" LAN_IN="eth0" SQUID_PORT="3128" PROXYSERVERS=(Atlanta Baltimore Boston Chicago Dallas Denver Houston KansasCity LosAngeles Miami NewYork Philadelphia Phoenix SanAntonio SanDiego SanJose Seattle Washington) SERVERLEN=${#PROXYSERVERS[*]} I=0 iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X modprobe ip_conntrack modprobe ip_conntrack_ftp echo 1 /proc/sys/net/ipv4/ip_forward iptables -P INPUT DROP iptables -P OUTPUT ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT while [ $I -lt $SERVERLEN ]; do iptables -t nat -A PREROUTING -i $LAN_IN -p tcp -d ${PROXYSERVERS[$I]}.wonderproxy.com --dport 80 -j ACCEPT let I++ done iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT iptables -A INPUT --protocol tcp --dport 80 -j ACCEPT iptables -A INPUT --protocol tcp --dport 443 -j ACCEPT iptables -A INPUT --protocol tcp --dport 22 -j ACCEPT iptables -A INPUT -j LOG iptables -A INPUT -j DROP

  Read the article

• Raspberry pi slows down my entire network

  - by gnusouth

  Whenever my Raspberry Pi is connected to the network (via ethernet) the entire network is slowed to a crawl. On my main computer, ping times for google.com go from ~10ms to ~200ms and it takes forever to load web pages. Connections are also slow on the Pi, with an apt-get update showing pathetic speeds in the order of 1KB/s. Turning off the Pi completely removes the drag from the network. I've tried static and dynamic IP addresses for the Pi, but both have the same problems. I'm currently using Raspbian (downloaded today), but also had this problem with Arch Linux. I've checked the connection's duplex with dmesg | grep -i duplex, which shows that the Pi's connection is running at 100Mbps, full-duplex, as expected. My modem/router is a Billion 7404VNPX (an Australian thing); relatively high-end, albeit a bit buggy at times (it will occassionally delete all its firewall settings). It assigns IPs in the range 192.168.1.1 to 192.168.1.20 and has 192.168.1.254 as its own IP. When I assign static IPs I tend to use the 192.168.1.200 area. Does anyone have any idea as to what could be causing this weird slowdown? Or any tests I could try? Thanks

  Read the article

• Troubleshooting my internet connection

  - by Simon Verbeke

  While I was out of the house, my father rearranged the network cables a bit. I don't know what he has done exactly - He says nothing more then pulling and untangling. When I came back home, my internet connection changed its IP from 192.168.0.205 to 169.254.197.233. The speed changed from 1Gbps to 10Mbps. It has also been at 100Mbps for a while. My subnetmask changed from 255.255.255.0 to 255.255.0.0. The standard gateway changed from 192.168.0.1 to no standard gateway. My DNS servers remain the same. I have checked the lights of the UTP ports, and it looks like it's only sending a heartbeat every few seconds. A sketch of the (relevant part of) the network: My PC ----- extender ----- modem ^ ^ ^ Wired | Wired | This thing connects two cables to each other All the cabling is gigabit, my network card is a Realtek RTL8168C(P)/8111(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20). THe modem is a CBN SVG6540E I have no idea what is going on here and I don't know how to find out either. Any help is welcome! If you need any more info, please ask.

  Read the article

• Two network adapters in one WindowsXP PC, how to make them work?

  - by Deele

  I have a need to set up network so I can use two ethernet cards inside one Windows (Windows XP SP2) based PC, one for internet connection, second, for internal LAN. How should I configure each NIC, with what IP's, subnet masks and gateways, so I can use inernet on my PC and get in touch with devices on my LAN? I have found that there are some sort of re routing nessesary inside my PC, but how does it work? I have already set up some configuration already, but I can't use it together with PC #1 NIC #1 connected. I need to disconnect, to access NIC WEB interface. Current configuration: Switch #1 and PC #1 NAS #2 are gigabit one's, so I could access NAS with gigabit speed. PC #1 NIC #1 IP XX.XXX.162.106 SN 255.255.255.248 GW XX.XXX.162.105 PC #1 NIC #2 IP 10.0.0.1 SN 255.255.0.0 GW 0.0.0.0 NAS #1 NIC #1 IP 10.0.0.12 SN 255.255.0.0 GW 0.0.0.0 My question is - what exact configuration should I do for every NIC in this LAN, so it would work? Is it possible to achieve internet access for Laptop, that is inside that NIC #2 LAN (should I just set up basic ICS)?

  Read the article

• How to Switch Chrome’s Default Search to International Google

  - by Erez Zukerman

  Google Chrome’s default search engine is Google. This makes perfect sense; the only problem is that it uses localized Google – for example, Google France or Google Israel. This impacts the interface language, and sometimes even the text orientation. Here’s how you can fix this and get “international” Google results with an English interface. First, we need to figure out what search query we’re going to use. Go to Google.com and execute a simple query for a single word – say “cats”. If you get real-time results, hit Enter so that the address bar updates with the query URL. It should look something like this: http://www.google.com/#sclient=psy&hl=en&site=&source=hp&q=cats&aq=f&aqi=g1g-s1g3&aql=&oq=&pbx=1&bav=on.2,or.&fp=369c8973645261b8 If you wish to customize your search further, click Advanced Search. For example, I would like Google to annotate results with the reading level they require, so I can see what’s going to be difficult to read: Latest Features How-To Geek ETC Macs Don’t Make You Creative! So Why Do Artists Really Love Apple? MacX DVD Ripper Pro is Free for How-To Geek Readers (Time Limited!) HTG Explains: What’s a Solid State Drive and What Do I Need to Know? How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Lakeside Sunset in the Mountains [Wallpaper] Taskbar Meters Turn Your Taskbar into a System Resource Monitor Create Shortcuts for Your Favorite or Most Used Folders in Ubuntu Create Custom Sized Thumbnail Images with Simple Image Resizer [Cross-Platform] Etch a Circuit Board using a Simple Homemade Mixture Sync Blocker Stops iTunes from Automatically Syncing

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >