Search Results

Search found 8189 results on 328 pages for 'fedora 16'.

Page 27/328 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

  • VMware Virtual Infrastructure Web Access not starting on Fedora 14

    - by FusionHammer
    I am running a Fedora 14 server with VMware Server 2. When I initially installed VMware Server, everything was working fine. This included accessing Web Access on port 8333 (https) and 8222 (http). I had to perform a server restart and afterwards, the Web Access is not starting when I run: /etc/init.d/vmware-mgmt start The VMware Server Host Agent starts [OK], but the Web Access has no [OK] or [Failed] next to it. I also checked ports 8333 and 8222 by running a netstat, but neither are showing up. In addition, I checked the proxy.log and client.log files in the following directory: /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/logs/ The proxy.log doesn't have entries in it past 9-18-2012, which is the date the server restart occurred. The client.log is empty. I not sure what is causing this issue or what log files will be helpful in narrowing down the cause. I could re-install VMware Server, but I would like to narrow down the cause as it could occur again with the new re-installed environment.

    Read the article

  • Unable to SSH into EC2 instance on Fedora 17

    - by abhishek
    I did following steps But I am not able to SSH to it(Same steps work fine on Fedora 14 image). I am getting Permission denied (publickey,gssapi-keyex,gssapi-with-mic) I created new instance using fedora 17 amazon community image(ami-2ea50247). I copied my ssh keys under /home/usertest/.ssh/ after creating a usertest I have SELINUX=disabled here is Debug info: $ ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com OpenSSH_5.2p1, OpenSSL 1.0.0b-fips 16 Nov 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ec2-54-243-101-41.compute-1.amazonaws.com [54.243.101.41] port 22. debug1: Connection established. debug1: identity file /home/usertest/.ssh/identity type -1 debug1: identity file /home/usertest/.ssh/id_rsa type -1 debug3: Not a RSA1 key file /home/usertest/.ssh/id_dsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/usertest/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 131/256 debug2: bits set: 506/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug1: Host 'ec2-54-243-101-41.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /home/usertest/.ssh/known_hosts:17 debug2: bits set: 500/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/usertest/.ssh/identity ((nil)) debug2: key: /home/usertest/.ssh/id_rsa ((nil)) debug2: key: /home/usertest/.ssh/id_dsa (0x7f904b5ae260) debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup gssapi-with-mic debug3: remaining preferred: publickey,keyboard-interactive,password debug3: authmethod_is_enabled gssapi-with-mic debug1: Next authentication method: gssapi-with-mic debug3: Trying to reverse map address 54.243.101.41. debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information debug2: we did not send a packet, disable method debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/usertest/.ssh/identity debug3: no such identity: /home/usertest/.ssh/identity debug1: Trying private key: /home/usertest/.ssh/id_rsa debug3: no such identity: /home/usertest/.ssh/id_rsa debug1: Offering public key: /home/usertest/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

    Read the article

  • Virtualizing WindowsXP on Linux Fedora 12 for Photoshop....

    - by Rae
    I am running a Linux server from 2000, I have Fedora12 installed as the OS. I know you can virtualize Windows XP on the system to be able to run Windows programs, but the problem is I My server has only one 1333Mhz Pentium 3 processor and 1G of Ram. granted this is a pretty kick ass computer for the day, but lacking the second processor I'm afraid that I will not be able to run Windows virtualization to support Photoshop CS3. Is there any program out there that runs similar to Photoshop, like windows Digital Image suite 10, that will run smoothly in my Linux Fedora 12 environment? or can I virtualize windows and run the Windows digital image suite 10, without slowing or corrupting my system?

    Read the article

  • Unable to access intel fake RAID 1 array in Fedora 14 after reboot

    - by Sim
    Hello everyone, 1st I am relatively new to linux (but not to *nix). I have 4 disks assembled in the following intel ahci bios fake raid arrays: 2x320GB RAID1 - used for operating systems md126 2x1TB RAID1 - used for data md125 I have used the raid of size 320GB to install my operating system and the second raid I didn't even select during the installation of Fedora 14. After successful partitioning and installation of Fedora, I tried to make the second array available, it was possible to make it visible in linux with mdadm --assembe --scan , after that I created one maximum size partition and 1 maximum size ext4 filesystem in it. Mounted, and used it. After restart - a few I/O errors during boot regarding md125 + inability to mount the filesystem on it and dropped into repair shell. I commented the filesystem in fstab and it booted. To my surprise, the array was marked as "auto read only": [root@localhost ~]# cat /proc/mdstat Personalities : [raid1] md125 : active (auto-read-only) raid1 sdc[1] sdd[0] 976759808 blocks super external:/md127/0 [2/2] [UU] md127 : inactive sdc[1](S) sdd[0](S) 4514 blocks super external:imsm md126 : active raid1 sda[1] sdb[0] 312566784 blocks super external:/md1/0 [2/2] [UU] md1 : inactive sdb[1](S) sda[0](S) 4514 blocks super external:imsm unused devices: <none> [root@localhost ~]# and the partition in it was not available as device special file in /dev: [root@localhost ~]# ls -l /dev/md125* brw-rw---- 1 root disk 9, 125 Jan 6 15:50 /dev/md125 [root@localhost ~]# But the partition is there according to fdisk: [root@localhost ~]# fdisk -l /dev/md125 Disk /dev/md125: 1000.2 GB, 1000202043392 bytes 19 heads, 10 sectors/track, 10281682 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1b238ea9 Device Boot Start End Blocks Id System /dev/md125p1 2048 1953519615 976758784 83 Linux [root@localhost ~]# I tried to "activate" the array in different ways (I'm not experienced with mdadm and the man page is gigantic so I was only browsing it looking for my answer) but it was impossible - the array would still stay in "auto read only" and the device special file for the partition it will not be in /dev. It was only after I recreated the partition via fdisk that it reappeared in /dev... until next reboot. So, my question is - How do I make the array automatically available after reboot? Here is some additional information: 1st I am able to see the UUID of the array in blkid: [root@localhost ~]# blkid /dev/sdc: UUID="b9a1149f-ae11-4fc8-a600-0d77354dc42a" SEC_TYPE="ext2" TYPE="ext3" /dev/sdd: UUID="b9a1149f-ae11-4fc8-a600-0d77354dc42a" SEC_TYPE="ext2" TYPE="ext3" /dev/md126p1: UUID="60C8D9A7C8D97C2A" TYPE="ntfs" /dev/md126p2: UUID="3d1b38a3-b469-4b7c-b016-8abfb26a5d7d" TYPE="ext4" /dev/md126p3: UUID="1Msqqr-AAF8-k0wi-VYnq-uWJU-y0OD-uIFBHL" TYPE="LVM2_member" /dev/mapper/vg00-rootlv: LABEL="_Fedora-14-x86_6" UUID="34cc1cf5-6845-4489-8303-7a90c7663f0a" TYPE="ext4" /dev/mapper/vg00-swaplv: UUID="4644d857-e13b-456c-ac03-6f26299c1046" TYPE="swap" /dev/mapper/vg00-homelv: UUID="82bd58b2-edab-4b4b-aec4-b79595ecd0e3" TYPE="ext4" /dev/mapper/vg00-varlv: UUID="1b001444-5fdd-41b6-a59a-9712ec6def33" TYPE="ext4" /dev/mapper/vg00-tmplv: UUID="bf7d2459-2b35-4a1c-9b81-d4c4f24a9842" TYPE="ext4" /dev/md125: UUID="b9a1149f-ae11-4fc8-a600-0d77354dc42a" SEC_TYPE="ext2" TYPE="ext3" /dev/sda: TYPE="isw_raid_member" /dev/md125p1: UUID="420adfdd-6c4e-4552-93f0-2608938a4059" TYPE="ext4" [root@localhost ~]# Here is how /etc/mdadm.conf looks like: [root@localhost ~]# cat /etc/mdadm.conf # mdadm.conf written out by anaconda MAILADDR root AUTO +imsm +1.x -all ARRAY /dev/md1 UUID=89f60dee:e46a251f:7475814b:d4cc19a9 ARRAY /dev/md126 UUID=a8775c90:cee66376:5310fc13:63bcba5b ARRAY /dev/md125 UUID=b9a1149f:ae114fc8:a6000d77:354dc42a [root@localhost ~]# here is how /proc/mdstat looks like after I recreate the partition in the array so that it becomes available: [root@localhost ~]# cat /proc/mdstat Personalities : [raid1] md125 : active raid1 sdc[1] sdd[0] 976759808 blocks super external:/md127/0 [2/2] [UU] md127 : inactive sdc[1](S) sdd[0](S) 4514 blocks super external:imsm md126 : active raid1 sda[1] sdb[0] 312566784 blocks super external:/md1/0 [2/2] [UU] md1 : inactive sdb[1](S) sda[0](S) 4514 blocks super external:imsm unused devices: <none> [root@localhost ~]# Detailed output regarding the array in subject: [root@localhost ~]# mdadm --detail /dev/md125 /dev/md125: Container : /dev/md127, member 0 Raid Level : raid1 Array Size : 976759808 (931.51 GiB 1000.20 GB) Used Dev Size : 976759940 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 2 Update Time : Fri Jan 7 00:38:00 2011 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 30ebc3c2:b6a64751:4758d05c:fa8ff782 Number Major Minor RaidDevice State 1 8 32 0 active sync /dev/sdc 0 8 48 1 active sync /dev/sdd [root@localhost ~]# and /etc/fstab, with /data commented (the filesystem that is on this array): # # /etc/fstab # Created by anaconda on Thu Jan 6 03:32:40 2011 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/mapper/vg00-rootlv / ext4 defaults 1 1 UUID=3d1b38a3-b469-4b7c-b016-8abfb26a5d7d /boot ext4 defaults 1 2 #UUID=420adfdd-6c4e-4552-93f0-2608938a4059 /data ext4 defaults 0 1 /dev/mapper/vg00-homelv /home ext4 defaults 1 2 /dev/mapper/vg00-tmplv /tmp ext4 defaults 1 2 /dev/mapper/vg00-varlv /var ext4 defaults 1 2 /dev/mapper/vg00-swaplv swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 [root@localhost ~]# Thanks in advance to everyone that even read this whole issue :-)

    Read the article

  • Problem with keyboard layout when OS X 10.6.3 -> Fedora 13

    - by user20196
    Hi, I have VMware installed on Fedora 13 (host OS) /amd 64bit. When I log to it from console VMware works good. I wanted to start remotely from OS X 10.6.3, so I installed NX client. Everything is fine with the keyboard layout if I do not use VMware. When I try to run the guest OS on VMware my keyboard is cut off completely. The host and the guest OSes are setup for "us" layout and for "generic 105 keys" keyboard.

    Read the article

  • Windows 7 wifi reports "no network access" and "no internet access" but connects in fedora

    - by rick2047
    I am running windows 7 home basic (64bit) on a Acer 5742G laptop with Atheos wifi adapter in it. Yesterday, I hiberneted my computer as I always do and up untill then the wifi was working fine. When I booted my computer up again today I started having a strange problem: It detects my wifi but after connecting to it, it keeps on oscillating between states of no network access and no internet access. I can't connect to anything (the internet or my router). I tried to reset my internet protocol stack using this fixit file. I also tried to uninstall and reinstall my network driver. Neither helped. I am using the same laptop's fedora installation right now and the wifi is working perfectly fine. Please help. Edit To add additional details, I have Microsoft Security essentials as my antivirus software and I haven't messed with the firewall or the router configurations.

    Read the article

  • ATI driver in Fedora linux 11

    - by unknown (google)
    I recently built a pc with an ATI Radeon HD 5750. I have installed Fedora 11 and installed the device driver for the Radeon 5700 series proprietary drivers. I wanted to see if there is graphics hardware acceleration. I typed in glxinfo at the terminal and I got: X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 135 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 14 Current serial number in output stream: 14 I don't know how to fix this. I tried to go to the ATI Catalyst Control Center; that worked, but the ATI Catalyst Control Center (Administrator) doesn't work. If anyone knows how to fix this problem then please let me know. Thanks

    Read the article

  • DNS "recursion not available" using a Cisco AnyConnect VPN connection

    - by codeape
    Does anyone have experience with configuring Cisco AnyConnect VPN? We have a problem with client DNS name resolution when connected over VPN. To me, it looks as if the Cisco AnyConnect VPN client intercepts DNS queries from the clients. Can someone confirm that the AnyConnect VPN client in fact does this (intercepts DNS traffic)? Where is this configured on the VPN server? EDIT: Here's how the routing table changes when I connect to the VPN: [~] $ diff -u /tmp/route_normal /tmp/route_vpn --- /tmp/route_normal 2010-01-20 19:23:47.000000000 +0100 +++ /tmp/route_vpn 2010-01-20 19:24:46.000000000 +0100 @@ -1,6 +1,10 @@ Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface +xxx.xxx.xx.xx.i 10.0.0.1 255.255.255.255 UGH 0 0 0 ath0 172.16.53.0 * 255.255.255.0 U 0 0 0 vmnet1 10.0.0.0 * 255.255.255.0 U 0 0 0 ath0 +172.17.20.0 * 255.255.255.0 U 0 0 0 cscotun 0 +192.168.111.0 172.17.20.212 255.255.255.0 UG 0 0 0 cscotun 0 172.16.140.0 * 255.255.255.0 U 0 0 0 vmnet8 +172.16.0.0 172.17.20.212 255.255.0.0 UG 0 0 0 cscotun 0 default 10.0.0.1 0.0.0.0 UG 0 0 0 ath0 EDIT 2: The IT guy has done "something" on the VPN endpoint. Now I get "recursion not available" when doing nslookup. The DNS servers have recursion enabled. So it must be the Cisco VPN DNS interception messing this up. ubuntu@domU-12-31-39-00-ED-14:~$ /opt/cisco/vpn/bin/vpn connect xxx.xxxxxx.xx ... >> Please enter your username and password ... >> notice: Establishing VPN... >> state: Connected >> notice: VPN session established to ... ubuntu@domU-12-31-39-00-ED-14:~$ nslookup www.vg.no ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server Server: 172.16.0.23 Address: 172.16.0.23#53 ** server can't find www.vg.no.compute-1.internal: REFUSED ubuntu@domU-12-31-39-00-ED-14:~$ ping 195.88.55.16 PING 195.88.55.16 (195.88.55.16) 56(84) bytes of data. 64 bytes from 195.88.55.16: icmp_seq=1 ttl=240 time=110 ms 64 bytes from 195.88.55.16: icmp_seq=2 ttl=240 time=111 ms 64 bytes from 195.88.55.16: icmp_seq=3 ttl=240 time=109 ms ^C --- 195.88.55.16 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2017ms rtt min/avg/max/mdev = 109.953/110.379/111.075/0.496 ms

    Read the article

  • tcpdump filter that excludes private ip traffic

    - by Kyle Brandt
    For a generic filter to exclude all traffic in my dump that is between private IP address, I came up with the following: sudo tcpdump -n ' (not ( (src net 172.16.0.0/20 or src net 10.0.0.0/8 or src net 192.168.0.0/16) and (dst net 172.16.0.0/20 or dst net 10.0.0.0/8 or dst net 192.168.0.0/16) ) ) and (not ( (dst net 172.16.0.0/20 or dst net 10.0.0.0/8 or dst net 192.168.0.0/16) and (src net 172.16.0.0/20 or src net 10.0.0.0/8 or src net 192.168.0.0/16) ) )' -w test2.dump Seems pretty excessive, but it also seems to work, is this filter a lot longer than it needs to be and there is better way to express this logic, or is there anything wrong with the filter?

    Read the article

  • How to deal with job that stop and cannot continue unless made foreground?

    - by Vi
    Recent example: mountlo (using UML): vi@vi-notebook:~/b$ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other& [1] 32561 vi@vi-notebook:~/b$ Checking that ptrace can change system call numbers...OK Checking syscall emulation patch for ptrace...OK Checking advanced syscall emulation patch for ptrace...OK Checking PROT_EXEC mmap in /tmp...OK Checking for the skas3 patch in the host: - /proc/mm...not found - PTRACE_FAULTINFO...not found - PTRACE_LDT...not found UML running in SKAS0 mode [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ bg [1]+ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other & [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ bg [1]+ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other & [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ bg [1]+ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other & [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ fg mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other Linux version 2.6.15 (miko@dorka) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Mon Feb 27 13:27:52 CET 2006 (normal output) ... vi@vi-notebook:~/b$ socat - exec:'mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8\,allow_other',pty,ctty fusermount: waitpid: No child processes vi@vi-notebook:~/b$ Also happens with Gimp (when it does run it's plug-ins). Parts of Gimp started by `gimp q.jpg&' freeze and cannot continue unless "killall -CONT" or made foreground. Is it a bug? How to reliably start things in a background?

    Read the article

  • Virtual machines interconnection inside Proxmox 2.1 Cluster

    - by Anton
    We have 3 physical servers (each with 1 NIC) in different datacentres, all of them are interconnected by openvpn bridged private network (10.x.x.x). Inside this network we have fully functional 3 nodes Proxmox 2.1 cluster. So, actually question is: Is there any "proper" way to make "global" local network (172.16.x.x) for all VMs inside cluster, so even if we move VM from one node to other we could reach it by static IP regardless of it's physical location? BTW, we can't add dedicated NIC to each server. Thanks in advance. EDIT: I have tried to make a separate openvpn bridge for 172.16.x.x, now I have at each server two interfaces: SRV1: openvpnbr1 - 172.16.13.1 vmbr0 - 172.16.1.1 SRV2: openvpnbr1 - 172.16.13.2 vmbr0 - 172.16.2.1 But now there is no connection between those ifaces: SRV1: ping 172.16.13.2 From 172.16.1.1 icmp_seq=2 Destination Host Unreachable SRV2: ping 172.16.13.1 From 172.16.2.1 icmp_seq=2 Destination Host Unreachable If I shut down vmbr0 interfaces, so there is connection between servers over openvpn, but vmbr0 is used by Proxmox... Where I am wrong?

    Read the article

  • norton ghost error in virtual box

    - by Nrew
    I'm trying out norton ghost on my virtual box guest os windows xp, dual boot with fedora 12. I've boot norton ghost iso. And tried to backup the partition where win xp and fedora is installed but I get this error. I'm backing it up on another virtual disk created through virtual box. What might be the cause of this error, and how to solve it.

    Read the article

  • Yum not Detected

    - by John
    Hello, I am trying to use SSH to update PHP and I'm getting the message "Yum not Detected." Is "Yum" something I need to enable or install? Following advice I got in a previous question, I typed this into SSH: cat /etc/*-release And it displayed this: Fedora Core release 6 (Zod) Fedora Core release 6 (Zod) Should Yum work on my server? If yes, how can I get it to work? Thanks in advance, John

    Read the article

  • Converting a Linux host to Virtual Machine

    - by Shyam
    On my PC I am currently running Fedora 12. I would like to convert that and the filesystem to a Virtual Machine, so that I can install Windows 7 as the main operating system and have this Fedora 12 as a VM in VMWare or VirtualBox or some such Desktop Virtualization system. Is this possible and how if yes, how?

    Read the article

  • Sync sticky notes between Windows 7 and Linux on Dual Boot System?

    - by TheLQ
    I love Windows 7's sticky notes, it really helps. Here's the issue though: I dual boot Windows 7 and Fedora Linux. Whichever OS I'm in is random, depending on what I'm wanting to do at the time. Therefore I can't rely on just keeping the notes in my "primary" OS and referencing it when needed Does anybody know of a way to sync Windows 7's Sticky Notes with Fedora? Various Google searches haven't yielded much as they deal with primarily syncing between common OS's.

    Read the article

  • How long should cobbler sync take to run?

    - by Robert V. Bolton
    I have setup a Fedora 13 minimum install inside of a VirtualBox VM, and am following this tutorial to setup Cobbler: PXE virtual network with Virtualbox and Cobbler When I go to run the initial cobbler sync the command seems hang. How long should it take to run this command? Since I did a minimum install of Fedora 13 am I missing a application that would prevent cobbler from executing the sync properly?

    Read the article

  • how to disable these logs on the screen?

    - by user62367
    using Fedora 14: http://pastebin.com/raw.php?i=jUvcfugw i mount an anonym Samba share [checks it in every 5 sec] it's working, ok, great! But: when i shut down my Fedora box, i can see the lines containing this scripts lines! Many times, about ~50x on the screen. How could i disable these lines when shutting down? I [and other people] don't want to see those lines for about ~ 5 sec Thank you!

    Read the article

  • postfix takes 60-90ms to queue email -- normal?

    - by Jeff Atwood
    We're seeing some (maybe?) strange delays when submitting individual emails to our local Postfix server. To help diagnose the issue, I wrote a little test program which sends 5 emails: get smtp 1ms ( 1 ms) email 0 677ms (676 ms) email 1 802ms (125 ms) email 2 890ms ( 88 ms) email 3 973ms ( 83 ms) email 4 1088ms (115 ms) Discounting the handshaking in the first email, that's about 90ms per email. These timings have also been corroborated with another test app written by someone else using a different codepath, so it appears to be server related. I turned on detailed logging and I can see that the delay is between the end of message \r\n\r\n and the receive: [16:31:29.95] [SEND] \r\n.\r\n [16:31:30.05] [RECV] 250 2.0.0 Ok: queued as B128E1E063\r\n [16:31:30.08] [SEND] \r\n.\r\n [16:31:30.17] [RECV] 250 2.0.0 Ok: queued as 4A7DE1E06E\r\n [16:31:30.19] [SEND] \r\n.\r\n [16:31:30.27] [RECV] 250 2.0.0 Ok: queued as 68ACC1E072\r\n [16:31:30.28] [SEND] \r\n.\r\n [16:31:30.34] [RECV] 250 2.0.0 Ok: queued as 7EFFE1E079\r\n [16:31:30.39] [SEND] \r\n.\r\n [16:31:30.45] [RECV] 250 2.0.0 Ok: queued as 9793C1E07A\r\n The time intervals tell the story (discounting the handshaking required for the initial email) -- each email is waiting about 60-90 milliseconds for postfix to queue! This seems .. excessive .. to me. Is it "normal" for postfix to take 60-90 ms for every email you send it? Or do I just have unreasonable expectations? I would expect the local postfix server to queue the email in about 20ms, tops!

    Read the article

  • A single AD user can't log into a single Mac bound to the domain (DirectoryServices error). How can I resolve this?

    - by Ben Wyatt
    On our campus, we have about 60 Macs joined to our Active Directory domain. Most users have no problems logging into Macs, as long as their accounts are configured correctly. However, we have one particular user who is unable to log in to just some of the Macs. He has no problem with most of them, but there is one group of them (all built from the same image) that he can't log in to. The machine in question is running OS X 10.6.2. The relevant entries from secure.log are below, with the hostname and username redacted. Aug 16 10:32:43 hostname SecurityAgent[4411]: Could not get the user record for username from DirectoryServices. Aug 16 10:32:43 hostname SecurityAgent[4411]: Will sleep 1 seconds and try again (retryCount = 4) Aug 16 10:32:44 hostname SecurityAgent[4411]: Could not get the user record for username from DirectoryServices. Aug 16 10:32:44 hostname SecurityAgent[4411]: Will sleep 2 seconds and try again (retryCount = 3) Aug 16 10:32:46 hostname SecurityAgent[4411]: Could not get the user record for username from DirectoryServices. Aug 16 10:32:46 hostname SecurityAgent[4411]: Will sleep 4 seconds and try again (retryCount = 2) Aug 16 10:33:10 hostname SecurityAgent[4411]: Could not get the user record for username from DirectoryServices. Aug 16 10:33:10 hostname SecurityAgent[4411]: Will sleep 8 seconds and try again (retryCount = 1) Aug 16 10:33:18 hostname SecurityAgent[4411]: User info context values set for username Aug 16 10:33:18 hostname SecurityAgent[4411]: unknown-user (username) login attempt PASSED for auditing Everything I've found online suggests that our use of Mobile Accounts is causing the issue. I turned that feature off, but I still can't log in as that user. id returns a record for his account, and nothing looks out of the ordinary. Has anyone here run into this before?

    Read the article

  • PCs on domain can not resolve external IP addresses using the DC's DNS Server

    - by Ben
    I currently have a domain controller which handles all DHCP and DNS. The DHCP works just fine and the domain controller itself can use the internet with no issues. However, PCs that are part of the domain are not able to use external websites, only internal. Does anyone have any way I can solve this issue? Thank you Server: Windows Server 2008 R2 PC: Win7 Enterprise x64 Edit: (domain controller) C:\Users\bcollyer>nslookup google.com Server: localhost Address: 127.0.0.1 Non-authoritative answer: Name: google.com Addresses: 2a00:1450:4009:809::100e 173.194.41.166 173.194.41.165 173.194.41.169 173.194.41.162 173.194.41.161 173.194.41.160 173.194.41.168 173.194.41.167 173.194.41.164 173.194.41.163 173.194.41.174 Edit 2: C:\Users\bcollyernetstat -rn Interface List 12...30 85 a9 f7 8a 21 ......Atheros AR8161/8165 PCI-E Gigabit Ethernet Control ler (NDIS 6.20) 1...........................Software Loopback Interface 1 13...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11...00 00 00 00 00 00 00 e0 Microsoft Teredo Tunneling Adapter IPv4 Route Table Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.0.67 172.16.0.202 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.0.0 255.255.0.0 On-link 172.16.0.202 276 172.16.0.202 255.255.255.255 On-link 172.16.0.202 276 172.16.255.255 255.255.255.255 On-link 172.16.0.202 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.0.202 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.0.202 276 Persistent Routes: None IPv6 Route Table Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link Persistent Routes: None BTW I have no javascript on the server so can't reply to individual answers... Sorry!

    Read the article

  • NTP daemon or ntpdate doesn't synchronize

    - by user2862333
    I'm having some problems with synchronization with an NTP server. 1) The NTP daemon doesn't sync the system clock at all, even though it's running (confirmed with /etc/init.d/ntp status). Forcing to sync with ntpd -q or ntpd -gq does not work either. 2) Stopping the NTP daemon and syncing manually with ntpdate does give me the following output: ~# ntpdate -d 0.debian.pool.ntp.org 6 Nov 16:48:53 ntpdate[4417]: ntpdate [email protected] Sat May 12 09:07:19 UTC 2012 (1) transmit(79.132.237.5) receive(79.132.237.5) transmit(85.234.197.2) receive(85.234.197.2) transmit(194.50.97.34) receive(194.50.97.34) transmit(79.132.237.1) receive(79.132.237.1) transmit(79.132.237.5) receive(79.132.237.5) transmit(85.234.197.2) receive(85.234.197.2) transmit(194.50.97.34) receive(194.50.97.34) transmit(79.132.237.1) receive(79.132.237.1) transmit(79.132.237.5) receive(79.132.237.5) transmit(85.234.197.2) receive(85.234.197.2) transmit(194.50.97.34) receive(194.50.97.34) transmit(79.132.237.1) receive(79.132.237.1) transmit(79.132.237.5) receive(79.132.237.5) transmit(85.234.197.2) receive(85.234.197.2) transmit(194.50.97.34) receive(194.50.97.34) transmit(79.132.237.1) receive(79.132.237.1) server 79.132.237.5, port 123 stratum 2, precision -20, leap 00, trust 000 refid [79.132.237.5], delay 0.05141, dispersion 0.00145 transmitted 4, in filter 4 reference time: d624e3b1.f490b90d Wed, Nov 6 2013 16:50:09.955 originate timestamp: d624e457.eaaf787c Wed, Nov 6 2013 16:52:55.916 transmit timestamp: d624e36c.4a7036fd Wed, Nov 6 2013 16:49:00.290 filter delay: 0.08537 0.05141 0.05151 0.06346 0.00000 0.00000 0.00000 0.00000 filter offset: 235.6038 235.6087 235.6095 235.6068 0.000000 0.000000 0.000000 0.000000 delay 0.05141, dispersion 0.00145 offset 235.608782 server 85.234.197.2, port 123 stratum 2, precision -20, leap 00, trust 000 refid [85.234.197.2], delay 0.05151, dispersion 0.00336 transmitted 4, in filter 4 reference time: d624e3e7.dc6cd02b Wed, Nov 6 2013 16:51:03.861 originate timestamp: d624e458.1c91031f Wed, Nov 6 2013 16:52:56.111 transmit timestamp: d624e36c.7da1d882 Wed, Nov 6 2013 16:49:00.490 filter delay: 0.05765 0.07750 0.06013 0.05151 0.00000 0.00000 0.00000 0.00000 filter offset: 235.6048 235.6014 235.6035 235.6078 0.000000 0.000000 0.000000 0.000000 delay 0.05151, dispersion 0.00336 offset 235.607826 server 194.50.97.34, port 123 stratum 3, precision -23, leap 00, trust 000 refid [194.50.97.34], delay 0.03021, dispersion 0.00090 transmitted 4, in filter 4 reference time: d624e38d.2bce952c Wed, Nov 6 2013 16:49:33.171 originate timestamp: d624e458.4dbbc114 Wed, Nov 6 2013 16:52:56.303 transmit timestamp: d624e36c.b0d38834 Wed, Nov 6 2013 16:49:00.690 filter delay: 0.03030 0.03636 0.03091 0.03021 0.00000 0.00000 0.00000 0.00000 filter offset: 235.6095 235.6085 235.6098 235.6105 0.000000 0.000000 0.000000 0.000000 delay 0.03021, dispersion 0.00090 offset 235.610589 server 79.132.237.1, port 123 stratum 3, precision -20, leap 00, trust 000 refid [79.132.237.1], delay 0.05113, dispersion 0.00305 transmitted 4, in filter 4 reference time: d624dfcb.6acea332 Wed, Nov 6 2013 16:33:31.417 originate timestamp: d624e458.838672ad Wed, Nov 6 2013 16:52:56.513 transmit timestamp: d624e36c.e405181c Wed, Nov 6 2013 16:49:00.890 filter delay: 0.06345 0.05113 0.05681 0.05656 0.00000 0.00000 0.00000 0.00000 filter offset: 235.6087 235.6038 235.6010 235.6074 0.000000 0.000000 0.000000 0.000000 delay 0.05113, dispersion 0.00305 offset 235.603888 6 Nov 16:49:00 ntpdate[4417]: step time server 79.132.237.5 offset 235.608782 sec Clearly, ntpdate can reach the NTP server(s), but after checking the clock, it hasn't changed and is still displaying the wrong time. Any ideas what would be the problem would be much appreciated.

    Read the article

  • Remove CR LF for all lines that are not followed by a specific number

    - by Kjeldsen
    I have 14000+ lines of a database, that I want to edit with Notepad++. All these lines should start with 1000 and I therefore want to delete CR LF at the end of those lines that are not followed by 1000. Eg. 1000 16 04000 CRLF sdfsdf 15 sdf de 05550 CRLF 1000 16 04000 CRLF 1000 16 04000 CRLF 5. sdkfd dksds 16 0555 CRLF 10/10/14 sdfsdf CRLF should after find and replace look like 1000 16 04000 sdfsdf 15 sdf de 05550 CRLF 1000 16 04000 CRLF 1000 16 04000 5. sdkfd dksds 16 0555 10 sdfsdf CRLF I have tried with find what: \r\n([^1000]) Replace with _\1 However, this doesn't seem to remove lines starting with a number (like 5. or 10/10/14). Is it possible to make just one RegEx to find and remove all line breaks that isn't followed by 1000? "_" indicating a "space"

    Read the article

  • Windows 2008 R2 DHCP Overlapping Scopes

    - by Buska
    We are trying to troubleshoot a scope overlap problem. We have multiple device types we wish to give all different ranges of a 16 bit subnet. IE. X device we wish to give 192.168.2.1-192.168.2.254/16, Y devices we wish to give 192.168.3.1-192.168.3.254/16. We are trying to accomplish this by creating different scopes and using the 60 class identifier. The problem is DHCP won't allow us to give these scopes with 16 bit masks because of the potential overlap. We aren't overlapping the address pool so why does DHCP care and can we work around this? If this isn't possible, how can i assign specific ranges by device type without creating multiple scopes? Any thoughts would be helpful. UPDATE: Entire Scope is 192.168.0.0/16 Gateway is 192.168.1.1/16 Device Hardware A - 192.168.20.1-192.168.20.254/16 Device Hardware B - 192.168.26.1-192.168.26.254/16 Device Hardware C - 192.168.85.1-192.168.85.254/16 We tried to setup multiple scopes for each device type (A,B,C) but couldn't specify a 16 bit mask as Scope A could technically overlap Scope B even thought our start and end addresses don't. I hope this makes more sense. Thanks for your thoughts.

    Read the article

  • iptables (DNAT)

    - by user1126425
    I have a host that acts as a gateway for other hosts. The configuration is such that eth0(192.168.1.3) is connected to internet via a router and eth1(172.16.2.50) is connected to internal network via switch. Given that, this host is also running a service that is bound to eth1 and serves the internal network. I want to extend this service to the outside world as well and was trying to manipulate iptables so that any request that comes to this host via eth0 and is directed to 192.168.1.3:80 is send to 172.16.2.50 and internet users can also make use of the service. Here are my iptable rules for setting up the host as gateway (and these work fine): sudo iptables -t nat -A POSTROUTING -s 172.16.2.0/16 -o eth0 -j MASQUERADE sudo iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -o eth1 -j MASQUERADE sudo iptables -A FORWARD -s 172.16.2.0/16 -o eth0 -j ACCEPT sudo iptables -A FORWARD -d 172.16.2.0/16 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT And these are the rules that I am trying to add to the iptables to achieve my ends: sudo iptables -A INPUT -d 192.168.1.3 -p tcp -dport 80 -i eth0 -j ACCEPT sudo iptables -t nat -A PREROUTING -d 192.168.1.3 -p tcp -dport 80 -j DNAT --to-destination 172.16.2.50:80 sudo iptables -t nat -A PREROUTING -s 172.16.2.50 -p tcp -sport 80 -j SNAT --to-source 192.168.1.3:80 sudo iptables -A FORWARD -d 192.168.1.3 -p tcp -dport 80 -m state --state ESTABLISHED,RELATED -j ACCEPT When I do so, I get error like : "multiple -d flags not allowed" ... Can someone tell me how to resolve this error... and do the entries that I want to add will serve my purpose ? Thanks!

    Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >