Search Results

Search found 7756 results on 311 pages for 'hardware acceleration'.

Page 27/311 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

  • Configure spanning tree from HP to Cisco hardware

    - by Tim Brigham
    I have three switches I'd like to configure in a loop - a Cisco stack (3750s) and two HP 2900 series. Each is connected to the next with a 10 gig backplane of one form or another. How do I configure the spanning tree on these systems to make this function correctly? From the documents I've looked at it looks like I need to set both sets of hardware to use MST mode but I'm not sure past that point. The trunking, etc is all set up as needed. HP Switch 1 A4 connected to Cisco 1/0/1. HP Switch 2 B2 connected to Cisco 2/0/1. HP Switch 1 A2 connected to HP Switch 2 A1. HP Switch 1 show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 1-4094 Switch MAC Address : 0021f7-126580 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 352,485 Time Since Last Change : 2 secs CST Root MAC Address : 0018ba-c74268 CST Root Priority : 1 CST Root Path Cost : 200000 CST Root Port : 1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- ... A1 | Auto 128 Disabled | A2 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A3 10GbE-CX4 | Auto 128 Disabled | A4 10GbE-SR | 2000 128 Forwarding | 0021f7-126580 2 Yes No HP Switch 2 show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 1-4094 Switch MAC Address : 0024a8-cd6000 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 19,623 Time Since Last Change : 32 secs CST Root MAC Address : 0018ba-c74268 CST Root Priority : 1 CST Root Path Cost : 202000 CST Root Port : A1 IST Regional Root MAC Address : 0024a8-cd6000 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- ... A1 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A2 10GbE-CX4 | Auto 128 Disabled | B1 SFP+SR | 2000 128 Blocking | a44c11-a67c80 2 Yes No B2 | Auto 128 Disabled | Cisco Stack 1 show spanning-tree ... (additional VLANs) VLAN0100 Spanning tree enabled protocol ieee Root ID Priority 1 Address 0018.bac7.426e Cost 2 Port 107 (TenGigabitEthernet2/1/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32868 (priority 32768 sys-id-ext 100) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Desg FWD 2 128.53 P2p Te2/1/1 Root FWD 2 128.107 P2p

    Read the article

  • How to decide on what hardware to deploy web application

    - by Yuval A
    Suppose you have a web application, no specific stack (Java/.NET/LAMP/Django/Rails, all good). How would you decide on which hardware to deploy it? What rules of thumb exist when determining how many machines you need? How would you formulate parameters such as concurrent users, simultaneous connections and DB read/write ratio to a decision on how much, and which, hardware you need? Any resources on this issue would be very helpful...

    Read the article

  • Open-source navigation software and 3rd party hardware

    - by anttir
    I'm a bit fed up with the current navigator (TomTom) as it turned to adware after six months of use. "Please buy new maps at www.tomtom.com, click this button to see what you wanted to do". Is there any (good) OSS navigation software with support for proprietary hardware? I'm perfectly happy to purchase separate maps and hardware for the software as long as I don't have to give my money to TomTom or Navigon.

    Read the article

  • Database or website of kernel config files ?

    - by Kami
    I've experienced some kernel panic after trying to compile gentoo kernel for a Sun UltraSPARC T5120 Server. The kernel panic came from a missing support for the SAS disk controller in the menu config. I've wasted so much time because I had no clue about the hardware I was using. I know that the kernel config depends on what you plan to do with your machine but I want to have a configuration file that at least match my hardware ! Is there a website or database that provides menuconfig's kernel configuration files for known or branded hardware like Dell Server or Apple computers ?

    Read the article

  • How to find an embedded platform?

    - by gmagana
    I am new to the locating hardware side of embedded programming and so after being completely overwhelmed with all the choices out there (pc104, custom boards, a zillion option for each board, volume discounts, devel kits, ahhh!!) I am asking here for some direction. Basically, I must find a new motherboard and (most likely) re-implement the program logic. Rewriting this in C/C++/Java/C#/Pascal/BASIC is not a problem for me. so my real problem is finding the hardware. This motherboard will have several other devices attached to it. Here is a summary of what I need to do: Required: 2 RS232 serial ports (one used all the time for primary UI, the second one not continuous) 1 modem (9600+ baud ok) [Modem will be in simultaneous use with only one of the serial port devices, so interrupt sharing with one serial port is OK, but not both] Minimum permanent/long term storage: Whatever O/S requires + 1 MB (executable) + 512 KB (Data files) RAM: Minimal, whatever the O/S requires plus maybe 1MB for executable. Nice to have: USB port(s) Ethernet network port Wireless network Implementation languages (any O/S I will adapt to): First choice Java/C# (Mono ok) Second choice is C/Pascal Third is BASIC Ok, given all this, I am having a lot of trouble finding hardware that will support this that is low in cost. Every manufacturer site I visit has a lot of options, and it's difficult to see if their offering will even satisfy my must-have requirements (for example they sometimes list 3 "serial ports", but it appears that only one of the three is RS232, for example, and don't mention what the other two are). The #1 constraint is cost, #2 is size. Can anyone help me with this? This little task has left me thinking I should have gone for EE and not CS :-). EDIT: A bit of background: This is a system currently in production, but the original programmer passed away, and the current hardware manufacturer cannot find hardware to run the (currently) DOS system, so I need to reimplement this in a modern platform. I can only change the programming and the motherboard hardware.

    Read the article

  • Event notification for ::SCardListReaders() [migrated]

    - by dpb
    In the PC/SC (Personal Computer Smart Card) Appln, I have (MSCAPI USB CCID based) 1) Calling ::SCardListReaders() returns SCARD_E_NO_READERS_AVAILABLE (0x8010002E). This call is made after OS starts fresh after reboot, from a thread which is part of my custom windows service. 2) Adding delay before ::SCardListReaders() call solves the problem. 3) How can I solve this problem elegantly ? Not using delay & waiting for some event to notify me. since a) Different machines may require different delay values b) Cannot loop since the error code is genuine c) Could not find this event as part of System Event Notification Service or similar COM interface d) platform is Windows 7 Any Help Appreciated.

    Read the article

  • Database Trends & Applications column: Database Benchmarking from A to Z

    - by KKline
    Have you heard of the monthly print and web magazine Database Trends & Applications (DBTA)? Did you know I'm the regular columnist covering SQL Server ? For the past six months, I've been writing a series of articles about database benchmarking culminating in the latest article discussing my three favorite database benchmarking tools: the free, open-source HammerDB, the native SQL Server Distributed Replay Utility, and the commercial Benchmark Factory from Dell / Quest Software. Wondering what...(read more)

    Read the article

  • Evolution of Apple: A Fan Spliced Mega Tribute to the Apple Product Lineup

    - by Jason Fitzpatrick
    Whether you’re an Apple fan or not, this 3.5 minute tribute to the evolution of Apple products is a neat look back at decades of computing history and iconic design. Put together by Apple fan August Brandels, the video splices together Apple commercials and promotional footage from the last 30 years (remixed against the catchy background tune Silhouettes by Avicii) into a mega tribute to the computer giant. If nothing else they should hire the guy to do motivational videos for annual employee meetings. [via Tech Crunch] HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

    Read the article

  • Remove a Digital Camera’s IR Filter for IR Photography on the Cheap

    - by Jason Fitzpatrick
    Whether you have a DSLR or a point-and-shoot, this simple hack allows you to shoot awesome IR photographs without the expense of a high-quality IR filter (or the accompanying loss of light that comes with using it). How does it work? You’ll need to take apart your camera and remove a single fragile layer of IR blocking glass from the CCD inside the camera body. After doing so, you’ll have a camera that sees infrared light by default, no special add-on filters necessary. Because it sees the IR light without the filters you’ll also skip out on the light loss that occurs with the addition of the add-on IR filter. The downside? You’re altering the camera in permanent and warranty-voiding way. This is most definitely not a hack for your brand new $2,000 DSLR, but it is a really fun hack to try out on an old point and shoot camera or your circa-2004 depreciated DSLR. Hit up the link below to see the process performed on an old Canon point and shoot–we’d strongly recommend searching for a break down guide for your specific camera model before attempting the trick on your own gear. Are You Brave Enough to IR-ize Your Camera [DIY Photography] HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How

    Read the article

  • The HTG Guide to Using a Bluetooth Keyboard with Your Android Device

    - by Matt Klein
    Android devices aren’t usually associated with physical keyboards. But, since Google is now bundling their QuickOffice app with the newly-released Kit-Kat, it appears inevitable that at least some Android tablets (particularly 10-inch models) will take on more productivity roles. In recent years, physical keyboards have been rendered obsolete by swipe style input methods such as Swype and Google Keyboard. Physical keyboards tend to make phones thick and plump, and that won’t fly today when thin (and even flexible and curved) is in vogue. So, you’ll be hard-pressed to find smartphone manufacturers launching new models with physical keyboards, thus rendering sliders to a past chapter in mobile phone evolution. It makes sense to ditch the clunky keyboard phone in favor of a lighter, thinner model. You’re going to carry around in your pocket or purse all day, why have that extra bulk and weight? That said, there is sound logic behind pairing tablets with keyboards. Microsoft continues to plod forward with its Surface models, and while critics continue to lavish praise on the iPad, its functionality is obviously enhanced and extended when you add a physical keyboard. Apple even has an entire page devoted specifically to iPad-compatible keyboards. But an Android tablet and a keyboard? Does such a thing even exist? They do actually. There are docking keyboards and keyboard/case combinations, there’s the Asus Transformer family, Logitech markets a Windows 8 keyboard that speaks “Android”, and these are just to name a few. So we know that keyboard products that are designed to work with Android exist, but what about an everyday Bluetooth keyboard you might use with Windows or OS X? How-To Geek wanted look at how viable it is to use such a keyboard with Android. We conducted some research and examined some lists of Android keyboard shortcuts. Most of what we found was long outdated. Many of the shortcuts don’t even apply anymore, while others just didn’t work. Regardless, after a little experimentation and a dash of customization, it turns out using a keyboard with Android is kind of fun, and who knows, maybe it will catch on. Setting things up Setting up a Bluetooth keyboard with Android is very easy. First, you’ll need a Bluetooth keyboard and of course an Android device, preferably running version 4.1 (Jelly Bean) or higher. For our test, we paired a second-generation Google Nexus 7 running Android 4.3 with a Samsung Series 7 keyboard. In Android, enable Bluetooth if it isn’t already on. We’d like to note that if you don’t normally use Bluetooth accessories and peripherals with your Android device (or any device really), it’s best practice to leave Bluetooth off because, like GPS, it drains the device’s battery more quickly. To enable Bluetooth, simply go to “Settings” -> “Bluetooth” and tap the slider button to “On”. To set up the keyboard, make sure it is on and then tap “Bluetooth” in the Android settings. On the resulting screen, your Android device should automatically search for and hopefully find your keyboard. If you don’t get it right the first time, simply turn the keyboard on again and then tap “Search for Devices” to try again. If it still doesn’t work, make sure you have fresh batteries and the keyboard isn’t paired to another device. If it is, you will need to unpair it before it will work with your Android device (consult your keyboard manufacturer’s documentation or Google if you don’t know how to do this). When Android finds your keyboard, select it under “Available Devices” … … and you should be prompted to type in a code: If successful, you will see that device is now “Connected” and you’re ready to go. If you want to test things out, try pressing the “Windows” key (“Apple” or “Command”) + ESC, and you will be whisked to your Home screen. So, what can you do? Traditional Mac and Windows users know there’s usually a keyboard shortcut for just about everything (and if there isn’t, there’s all kinds of ways to remap keys to do a variety of commands, tasks, and functions). So where does Android fall in terms of baked-in keyboard commands? There answer to that is kind of enough, but not too much. There are definitely established combos you can use to get around, but they aren’t clear and there doesn’t appear to be any one authority on what they are. Still, there is enough keyboard functionality in Android to make it a viable option, if only for those times when you need to get something done (long e-mail or important document) and an on-screen keyboard simply won’t do. It’s important to remember that Android is, and likely always will be a touch-first interface. That said, it does make some concessions to physical keyboards. In other words, you can get around Android fairly well without having to lift your hands off the keys, but you will still have to tap the screen regularly, unless you add a mouse. For example, you can wake your device by tapping a key rather than pressing its power button. However, if your device is slide or pattern-locked, then you’ll have to use the touchscreen to unlock it – a password or PIN however, works seamlessly with a keyboard – other things like widgets and app controls and features, have to be tapped. You get the idea. Keyboard shortcuts and navigation As we said, baked-in keyboard shortcut combos aren’t necessarily abundant nor apparent. The one thing you can always do is search. Any time you want to Google something, start typing from the Home screen and the search screen will automatically open and begin displaying results. Other than that, here is what we were able to figure out: ESC = go back CTRL + ESC = menu CTRL + ALT + DEL = restart (no questions asked) ALT + SPACE = search page (say “OK Google” to voice search) ALT + TAB (ALT + SHIFT + TAB) = switch tasks Also, if you have designated volume function keys, those will probably work too. There’s also some dedicated app shortcuts like calculator, Gmail, and a few others: CMD + A = calculator CMD + C = contacts CMD + E = e-mail CMD + G = Gmail CMD + L = Calendar CMD + P = Play Music CMD + Y = YouTube Overall, it’s not a long comprehensive list and there’s no dedicated keyboard combos for the full array of Google’s products. Granted, it’s hard to imagine getting a lot of mileage out of a keyboard with Maps but with something like Keep, you could type out long, detailed lists on your tablet, and then view them on your smartphone when you go out shopping. You can also use the arrow keys to navigate your Home screen over shortcuts and open the app drawer. When something on the screen is selected, it will be highlighted in blue. Press “Enter” to open your selection. Additionally, if an app has its own set of shortcuts, e.g. Gmail has quite a few unique shortcuts to it, as does Chrome, some – though not many – will work in Android (not for YouTube though). Also, many “universal” shortcuts such as Copy (CTRL + C), Cut (CTRL + X), Paste (CTRL + V), and Select All (CTRL + A) work where needed – such as in instant messaging, e-mail, social media apps, etc. Creating custom application shortcuts What about custom shortcuts? When we were researching this article, we were under the impression that it was possible to assign keyboard combinations to specific apps, such as you could do on older Android versions such as Gingerbread. This no long seems to be the case and nowhere in “Settings” could we find a way to assign hotkey combos to any of our favorite, oft-used apps or functions. If you do want custom keyboard shortcuts, what can you do? Luckily, there’s an app on Google Play that allows you to, among other things, create custom app shortcuts. It is called External Keyboard Helper (EKH) and while there is a free demo version, the pay version is only a few bucks. We decided to give EKH a whirl and through a little experimentation and finally reading the developer’s how-to, we found we could map custom keyboard combos to just about anything. To do this, first open the application and you’ll see the main app screen. Don’t worry about choosing a custom layout or anything like that, you want to go straight to the “Advanced settings”: In the “Advanced settings” select “Application shortcuts” to continue: You can have up to 16 custom application shortcuts. We are going to create a custom shortcut to the Facebook app. We choose “A0”, and from the resulting list, Facebook. You can do this for any number of apps, services, and settings. As you can now see, the Facebook app has now been linked to application-zero (A0): Go back to the “Advanced settings” and choose “Customize keyboard mappings”: You will be prompted to create a custom keyboard layout so we choose “Custom 1”: When you choose to create a custom layout, you can do a great many more things with your keyboard. For example, many keyboards have predefined function (Fn) keys, which you can map to your tablet’s brightness controls, toggle WiFi on/off, and much more. A word of advice, the application automatically remaps certain keys when you create a custom layout. This might mess up some existing keyboard combos. If you simply want to add some functionality to your keyboard, you can go ahead and delete EKH’s default changes and start your custom layout from scratch. To create a new combo, select “Add new key mapping”: For our new shortcut, we are going to assign the Facebook app to open when we key in “ALT + F”. To do this, we press the “F” key while in the “Scancode” field and we see it returns a value of “33”. If we wanted to use a different key, we can press “Change” and scan another key’s numerical value. We now want to assign the “ALT” key to application “A0”, previously designated as the Facebook app. In the “AltGr” field, we enter “A0” and then “Save” our custom combo. And now we see our new application shortcut. Now, as long as we’re using our custom layout, every time we press “ALT + F”, the Facebook app will launch: External Keyboard Helper extends far beyond simple application shortcuts and if you are looking for deeper keyboard customization options, you should definitely check it out. Among other things, EKH also supports dozens of languages, allows you to quickly switch between layouts using a key or combo, add up to 16 custom text shortcuts, and much more! It can be had on Google Play for $2.53 for the full version, but you can try the demo version for free. More extensive documentation on how to use the app is also available. Android? Keyboard? Sure, why not? Unlike traditional desktop operating systems, you don’t need a physical keyboard and mouse to use a mobile operating system. You can buy an iPad or Nexus 10 or Galaxy Note, and never need another accessory or peripheral – they work as intended right out of the box. It’s even possible you can write the next great American novel on one these devices, though that might require a lot of practice and patience. That said, using a keyboard with Android is kind of fun. It’s not revelatory but it does elevate the experience. You don’t even need to add customizations (though they are nice) because there are enough existing keyboard shortcuts in Android to make it usable. Plus, when it comes to inputting text such as in an editor or terminal application, we fully advocate big, physical keyboards. Bottom line, if you’re looking for a way to enhance your Android tablet, give a keyboard a chance. Do you use your Android device for productivity? Is a physical keyboard an important part of your setup? Do you have any shortcuts that we missed? Sound off in the comments and let us know what you think.     

    Read the article

  • Potentially The World’s Filthiest PC [Video]

    - by Jason Fitzpatrick
    We’re confident we’ve seen some dusty PC cases in our day, but nothing we’ve ever cleaned produced the sheer volume of smoke-bomb like dust this neglected tower spews out. That noise you hear, about 1:15 into the video, is the sound of the compressor motor kicking back on to top off the pressure tank: behold, a PC so filthy the compressor cleaning it out needs to take a break! [via Geeks Are Sexy] HTG Explains: Why Linux Doesn’t Need Defragmenting How to Convert News Feeds to Ebooks with Calibre How To Customize Your Wallpaper with Google Image Searches, RSS Feeds, and More

    Read the article

  • My new laptop - with a really nice battery option

    - by Rob Farley
    It was about time I got a new laptop, and so I made a phone-call to Dell to discuss my options. I decided not to get an SSD from them, because I’d rather choose one myself – the sales guy tells me that changing the HD doesn’t void my warranty, so that’s good (incidentally, I’d love to hear people’s recommendations for which SSD to get for my laptop). Unfortunately this machine only has one HD slot, but I figure that I’ll put lots of stuff onto external disks anyway. The machine I got was a Dell Studio XPS 16. It’s red (which suits my company), but also has the Intel® Core™ i7-820QM Processor, which is 4 Cores/8 Threads. Makes for a pretty Task Manager, but nothing like the one I saw at SQLBits last year (at 96 cores), or the one that my good friend James Rowland-Jones writes about here. But the reason for this post is actually something in the software that comes with the machine – you know, the stuff that most people uninstall at the earliest opportunity. I had just reinstalled the operating system, and was going through the utilities to get the drivers up-to-date, when I noticed that one of Dell applications included an option to disable battery charging. So I installed it. And sure enough, I can tell the battery not to charge now. Clearly Dell see it as a temporary option, and one that’s designed for when you’re on a plane. But for me, I most often use my laptop with the power plugged in, which means I don’t need to have my battery continually topping itself up. So I really love this option, but I feel like it could go a little further. I’d like “Not Charging” to be the default option, and let me set it when I want to charge it (which should theoretically make my battery last longer). I also intend to work out how this option works, so that I can script it and put it into my StartUp options (so it can be the Default setting). Actually – if someone has already worked this out and can tell me what it does, then please feel free to let me know. Even better would be an external switch. I had a switch on my old laptop (a Dell Latitude) for WiFi, so that I could turn that off before I turned on the computer (this laptop doesn’t give me that option – no physical switch for flight mode). I guess it just means I’ll get used to leaving the WiFi off by default, and turning it on when I want it – might save myself some battery power that way too. Soon I’ll need to take the plunge and sync my iPhone with the new laptop. I’m a little worried that I might lose something – Apple’s messages about how my stuff will be wiped and replaced with what’s on the PC doesn’t fill me with confidence, as it’s a new PC that doesn’t have stuff on it. But having a new machine is definitely a nice experience, and one that I can recommend. I’m sure when I get around to buying an SSD I’ll feel like it’s shiny and new all over again! Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • How do I get a Dane-Elec mp3/mp4 player working?

    - by user40432
    My MP3/MP4 does not plug-in and play and therefore I can not transfer any file to the MP3/MP4 dane-elec music my touch or only dane-elec with 8 gb in memory and perhapses model zt1 with radio,..and microsdhc card slot following the above link the mp3/mp4 is there and it is MP3 Player: TOUCH MY MUSIC and the complete information is on this site http://www.danedigital.com/8-Music-Media-Players/2-music-touch.html as the Technical Specifications MP3 Player: TOUCH MY MUSIC The Mp4 player has a very classy. It allows its users to play music and view photos and video. His fluent interface, its touch-pad, his radio and RDS Micro SDHC reader makes him a very complete device will become the ideal musical companion. ubuntu i am with is ubuntu 11.10 kernel 3.0.0-14-generic the latest I tried to install many applications but nothing worked. With disk utility I can see that Ubuntu can recognize something, that as a peripheral device named rockchip usbdisk user and rockchip usbdisk sd, and i can plug and play other devices, and only this mp3/mp4 do not connect to the computer with ubuntu and the device as no problem working disconnected to computer I try to see if work on Windows and it does! I can see the device and transfer files to the MP3/MP4 dane-elec folder device and use FAT32. So why can not do on Ubuntu!? What can I do and why does not work on Ubuntu? What is wrong with it? Here are the logs: Jan 4 17:27:34 a-ubuntu kernel: [ 141.948863] init: apport pre-start process (1970) terminated with status 1 Jan 4 17:27:34 a-ubuntu kernel: [ 141.963202] init: apport post-stop process (1994) terminated with status 1 Jan 4 17:30:02 a-ubuntu kernel: [ 289.564049] usb 2-4: new high speed USB device number 3 using ehci_hcd Jan 4 17:30:02 a-ubuntu kernel: [ 289.988706] usbcore: registered new interface driver uas Jan 4 17:30:02 a-ubuntu kernel: [ 289.992056] Initializing USB Mass Storage driver... Jan 4 17:30:02 a-ubuntu kernel: [ 289.992272] scsi6 : usb-storage 2-4:1.0 Jan 4 17:30:02 a-ubuntu kernel: [ 289.993082] usbcore: registered new interface driver usb-storage Jan 4 17:30:02 a-ubuntu kernel: [ 289.993088] USB Mass Storage support registered. Jan 4 17:30:03 a-ubuntu kernel: [ 290.996887] scsi 6:0:0:0: Direct-Access RockChip USBDISK User 1.00 PQ: 0 ANSI: 0 Jan 4 17:30:03 a-ubuntu kernel: [ 290.997372] scsi 6:0:0:1: Direct-Access RockChip USBDISK SD 1.00 PQ: 0 ANSI: 0 Jan 4 17:30:03 a-ubuntu kernel: [ 290.997478] scsi: killing requests for dead queue Jan 4 17:30:03 a-ubuntu kernel: [ 291.002712] scsi: killing requests for dead queue Jan 4 17:30:03 a-ubuntu kernel: [ 291.002880] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.016249] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.032252] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.048182] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.060178] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.060357] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.080381] sd 6:0:0:0: Attached scsi generic sg2 type 0 Jan 4 17:30:04 a-ubuntu kernel: [ 291.080646] sd 6:0:0:1: Attached scsi generic sg3 type 0 Jan 4 17:30:04 a-ubuntu kernel: [ 291.088381] sd 6:0:0:0: [sdb] 16015360 512-byte logical blocks: (8.19 GB/7.63 GiB) Jan 4 17:30:04 a-ubuntu kernel: [ 291.088988] sd 6:0:0:1: [sdc] Attached SCSI removable disk Jan 4 17:30:04 a-ubuntu kernel: [ 291.200050] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:04 a-ubuntu kernel: [ 291.448044] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:04 a-ubuntu kernel: [ 291.696055] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:04 a-ubuntu kernel: [ 291.832046] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled Jan 4 17:30:04 a-ubuntu kernel: [ 291.832994] sd 6:0:0:0: [sdb] Asking for cache data failed Jan 4 17:30:04 a-ubuntu kernel: [ 291.833001] sd 6:0:0:0: [sdb] Assuming drive cache: write through Jan 4 17:30:04 a-ubuntu kernel: [ 291.834378] sdb: detected capacity change from 8199864320 to 0 Jan 4 17:30:04 a-ubuntu kernel: [ 291.835367] sd 6:0:0:0: [sdb] Attached SCSI removable disk Jan 4 17:30:06 a-ubuntu kernel: [ 293.004741] sd 6:0:0:0: [sdb] 16015360 512-byte logical blocks: (8.19 GB/7.63 GiB) Jan 4 17:30:06 a-ubuntu kernel: [ 293.116051] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:21 a-ubuntu kernel: [ 308.228043] usb 2-4: device descriptor read/64, error -110 Jan 4 17:30:36 a-ubuntu kernel: [ 323.444072] usb 2-4: device descriptor read/64, error -110 Jan 4 17:30:36 a-ubuntu kernel: [ 323.660047] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:51 a-ubuntu kernel: [ 338.772085] usb 2-4: device descriptor read/64, error -110 Jan 4 17:31:06 a-ubuntu kernel: [ 353.988064] usb 2-4: device descriptor read/64, error -110 Jan 4 17:31:07 a-ubuntu kernel: [ 354.204058] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:31:12 a-ubuntu kernel: [ 359.224115] usb 2-4: device descriptor read/8, error -110 Jan 4 17:31:17 a-ubuntu kernel: [ 364.344136] usb 2-4: device descriptor read/8, error -110 Jan 4 17:31:17 a-ubuntu kernel: [ 364.560037] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:31:22 a-ubuntu kernel: [ 369.580132] usb 2-4: device descriptor read/8, error -110 Jan 4 17:31:27 a-ubuntu kernel: [ 374.700126] usb 2-4: device descriptor read/8, error -110 Jan 4 17:31:27 a-ubuntu kernel: [ 374.804121] usb 2-4: USB disconnect, device number 3 Jan 4 17:31:27 a-ubuntu kernel: [ 374.804518] sd 6:0:0:0: Device offlined - not ready after error recovery Jan 4 17:31:27 a-ubuntu kernel: [ 374.804600] sd 6:0:0:0: [sdb] No Caching mode page present Jan 4 17:31:27 a-ubuntu kernel: [ 374.804606] sd 6:0:0:0: [sdb] Assuming drive cache: write through Jan 4 17:31:27 a-ubuntu kernel: [ 374.804693] sd 6:0:0:0: [sdb] READ CAPACITY failed Jan 4 17:31:27 a-ubuntu kernel: [ 374.804698] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Jan 4 17:31:27 a-ubuntu kernel: [ 374.804704] sd 6:0:0:0: [sdb] Sense not available. Jan 4 17:31:27 a-ubuntu kernel: [ 374.804744] sd 6:0:0:0: [sdb] No Caching mode page present Jan 4 17:31:27 a-ubuntu kernel: [ 374.804748] sd 6:0:0:0: [sdb] Assuming drive cache: write through Jan 4 17:31:27 a-ubuntu kernel: [ 374.804754] sdb: detected capacity change from 8199864320 to 0 Jan 4 17:31:27 a-ubuntu kernel: [ 374.820273] scsi: killing requests for dead queue Jan 4 17:31:27 a-ubuntu kernel: [ 374.852240] scsi: killing requests for dead queue Jan 4 17:31:27 a-ubuntu kernel: [ 374.980054] usb 2-4: new high speed USB device number 4 using ehci_hcd Jan 4 17:31:43 a-ubuntu kernel: [ 390.092059] usb 2-4: device descriptor read/64, error -110 Jan 4 17:31:58 a-ubuntu kernel: [ 405.308070] usb 2-4: device descriptor read/64, error -110 Jan 4 17:31:58 a-ubuntu kernel: [ 405.524078] usb 2-4: new high speed USB device number 5 using ehci_hcd and the other post is: http://pastebin.ubuntu.com/792915/ and the other bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x04f2 Chicony Electronics Co., Ltd idProduct 0xb008 USB 2.0 Camera bcdDevice 93.27 iManufacturer 2 Chicony Electronics Co., Ltd. iProduct 1 Chicony USB 2.0 Camera iSerial 3 SN0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 565 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 14 Video bFunctionSubClass 3 Video Interface Collection bFunctionProtocol 0 iFunction 1 Chicony USB 2.0 Camera Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 1 Video Control bInterfaceProtocol 0 iInterface 1 Chicony USB 2.0 Camera VideoControl Interface Descriptor: bLength 13 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdUVC 1.00 wTotalLength 77 dwClockFrequency 15.000000MHz bInCollection 1 baInterfaceNr( 0) 1 VideoControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 4 iTerminal 0 VideoControl Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 6 (EXTENSION_UNIT) bUnitID 4 guidExtensionCode {7033f028-1163-2e4a-ba2c-6890eb334016} bNumControl 1 bNrPins 1 baSourceID( 0) 3 bControlSize 1 bmControls( 0) 0x01 iExtension 0 VideoControl Interface Descriptor: bLength 18 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Camera Sensor bAssocTerminal 0 iTerminal 0 wObjectiveFocalLengthMin 0 wObjectiveFocalLengthMax 0 wOcularFocalLength 0 bControlSize 3 bmControls 0x00000000 VideoControl Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 5 (PROCESSING_UNIT) Warning: Descriptor too short bUnitID 3 bSourceID 1 wMaxMultiplier 0 bControlSize 2 bmControls 0x0000053f Brightness Contrast Hue Saturation Sharpness Gamma Backlight Compensation Power Line Frequency iProcessing 0 bmVideoStandards 0x a NTSC - 525/60 SECAM - 625/50 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 6 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 VideoStreaming Interface Descriptor: bLength 14 bDescriptorType 36 bDescriptorSubtype 1 (INPUT_HEADER) bNumFormats 1 wTotalLength 345 bEndPointAddress 129 bmInfo 0 bTerminalLink 2 bStillCaptureMethod 0 bTriggerSupport 1 bTriggerUsage 0 bControlSize 1 bmaControls( 0) 27 VideoStreaming Interface Descriptor: bLength 27 bDescriptorType 36 bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED) bFormatIndex 1 bNumFrameDescriptors 7 guidFormat {59555932-0000-1000-8000-00aa00389b71} bBitsPerPixel 16 bDefaultFrameIndex 1 bAspectRatioX 0 bAspectRatioY 0 bmInterlaceFlags 0x00 Interlaced stream or variable: No Fields per frame: 2 fields Field 1 first: No Field pattern: Field 1 only bCopyProtect 0 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 1 bmCapabilities 0x00 Still image unsupported wWidth 640 wHeight 480 dwMinBitRate 614400 dwMaxBitRate 18432000 dwMaxVideoFrameBufferSize 614400 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 2 bmCapabilities 0x00 Still image unsupported wWidth 352 wHeight 288 dwMinBitRate 202752 dwMaxBitRate 6082560 dwMaxVideoFrameBufferSize 202752 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 3 bmCapabilities 0x00 Still image unsupported wWidth 320 wHeight 240 dwMinBitRate 153600 dwMaxBitRate 4608000 dwMaxVideoFrameBufferSize 153600 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 4 bmCapabilities 0x00 Still image unsupported wWidth 176 wHeight 144 dwMinBitRate 50688 dwMaxBitRate 1520640 dwMaxVideoFrameBufferSize 50688 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 5 bmCapabilities 0x00 Still image unsupported wWidth 160 wHeight 120 dwMinBitRate 38400 dwMaxBitRate 1152000 dwMaxVideoFrameBufferSize 38400 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 34 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 6 bmCapabilities 0x00 Still image unsupported wWidth 1280 wHeight 800 dwMinBitRate 2048000 dwMaxBitRate 18432000 dwMaxVideoFrameBufferSize 2048000 dwDefaultFrameInterval 1333333 bFrameIntervalType 2 dwFrameInterval( 0) 1333333 dwFrameInterval( 1) 2000000 VideoStreaming Interface Descriptor: bLength 34 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 7 bmCapabilities 0x00 Still image unsupported wWidth 1280 wHeight 1024 dwMinBitRate 2621440 dwMaxBitRate 23592960 dwMaxVideoFrameBufferSize 2621440 dwDefaultFrameInterval 1333333 bFrameIntervalType 2 dwFrameInterval( 0) 1333333 dwFrameInterval( 1) 2000000 VideoStreaming Interface Descriptor: bLength 6 bDescriptorType 36 bDescriptorSubtype 13 (COLORFORMAT) bColorPrimaries 1 (BT.709,sRGB) bTransferCharacteristics 1 (BT.709) bMatrixCoefficients 4 (SMPTE 170M (BT.601)) Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0080 1x 128 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0100 1x 256 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0320 1x 800 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0b20 2x 800 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 5 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x1320 3x 800 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 6 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x13e8 3x 1000 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 006 Device 002: ID 04d9:1503 Holtek Semiconductor, Inc. Shortboard Lefty Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x04d9 Holtek Semiconductor, Inc. idProduct 0x1503 Shortboard Lefty bcdDevice 3.10 iManufacturer 1 iProduct 2 USB Keyboard iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 62 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 101 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered)

    Read the article

  • How to remove the “AMD Testing use only” watermark from Ubuntu 12.10

    - by Lucio
    I've installed the latest catalyst driver (beta) following the step in this guide for Ubuntu Quantal Quetzal. My system is 64 bit and my graphic card is an ATI RadeonHD 6670, this g.c. is Officially Supported (Catalyst & Open Source), you can confirm that from this AMD Linux Community thread. I don't have any problem, except the AMD testing use only watermark. I see the following frame in any stage into the OS (logged, unlloged, etc.) except in the terminals. I found different versions of how to remove this image, but this change according to the system, so I want an answer from this popular (trusted) site. How to solve this issue in Ubuntu 12.10 32b? This procedure is different in a 64b system?

    Read the article

  • How do you setup the driver for a Philips based TV capture card?

    - by user8270
    Hi, I have a TV card that I have not managed to install with Ubuntu 10.10 i386. I have tried various topics in various forums and I could not install it. I hope you can help me to install it thank you. lspci 01:07.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01) dmesg [10299.516344] saa7134 ALSA driver for DMA sound unloaded [11385.340661] Linux video capture interface: v2.00 [11385.384278] saa7130/34: v4l2 driver version 0.2.16 loaded [11385.384390] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [11385.384403] saa7130[0]: subsystem: 1131:0000, board: LifeView/Typhoon FlyVIDEO2000 [card=3,insmod option] [11385.384412] saa7130[0]: can't get MMIO memory @ 0x0 [11385.384431] saa7134: probe of 0000:01:07.0 failed with error -16 [11385.401174] saa7134 ALSA driver for DMA sound loaded [11385.401182] saa7134 ALSA: no saa7134 cards found [11477.797019] tvtime[12534]: segfault at 6b0 ip 0804cf64 sp bf928a4c error 4 in tvtime[8048000+76000] [11626.141821] tvtime[12549]: segfault at 6b0 ip 0804cf64 sp bfec357c error 4 in tvtime[8048000+76000] [12218.120632] saa7134 ALSA driver for DMA sound unloaded [12464.993061] Linux video capture interface: v2.00 [12465.028285] saa7130/34: v4l2 driver version 0.2.16 loaded [12465.028392] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [12465.028404] saa7134: <rant> [12465.028406] saa7134: Congratulations! Your TV card vendor saved a few [12465.028408] saa7134: cents for a eeprom, thus your pci board has no [12465.028411] saa7134: subsystem ID and I can't identify it automatically [12465.028414] saa7134: </rant> [12465.028416] saa7134: I feel better now. Ok, here are the good news: [12465.028418] saa7134: You can use the card=<nr> insmod option to specify [12465.028421] saa7134: which board do you have. The list: [12465.028428] saa7134: card=0 -> UNKNOWN/GENERIC [12465.028435] saa7134: card=1 -> Proteus Pro [philips reference design] 1131:2001 1131:2001 [12465.028447] saa7134: card=2 -> LifeView FlyVIDEO3000 5168:0138 4e42:0138 [12465.028457] saa7134: card=3 -> LifeView/Typhoon FlyVIDEO2000 5168:0138 4e42:0138 [12465.028467] saa7134: card=4 -> EMPRESS 1131:6752 [12465.028475] saa7134: card=5 -> SKNet Monster TV 1131:4e85 [12465.028484] saa7134: card=6 -> Tevion MD 9717 [12465.028491] saa7134: card=7 -> KNC One TV-Station RDS / Typhoon TV Tune 1131:fe01 1894:fe01 [12465.028501] saa7134: card=8 -> Terratec Cinergy 400 TV 153b:1142 [12465.028510] saa7134: card=9 -> Medion 5044 [12465.028517] saa7134: card=10 -> Kworld/KuroutoShikou SAA7130-TVPCI [12465.028523] saa7134: card=11 -> Terratec Cinergy 600 TV 153b:1143 [12465.028532] saa7134: card=12 -> Medion 7134 16be:0003 16be:5000 [12465.028542] saa7134: card=13 -> Typhoon TV+Radio 90031 [12465.028548] saa7134: card=14 -> ELSA EX-VISION 300TV 1048:226b [12465.028557] saa7134: card=15 -> ELSA EX-VISION 500TV 1048:226a [12465.028565] saa7134: card=16 -> ASUS TV-FM 7134 1043:4842 1043:4830 1043:4840 [12465.028576] saa7134: card=17 -> AOPEN VA1000 POWER 1131:7133 [12465.028585] saa7134: card=18 -> BMK MPEX No Tuner [12465.028592] saa7134: card=19 -> Compro VideoMate TV 185b:c100 [12465.028600] saa7134: card=20 -> Matrox CronosPlus 102b:48d0 [12465.028608] saa7134: card=21 -> 10MOONS PCI TV CAPTURE CARD 1131:2001 [12465.028617] saa7134: card=22 -> AverMedia M156 / Medion 2819 1461:a70b [12465.028625] saa7134: card=23 -> BMK MPEX Tuner [12465.028632] saa7134: card=24 -> KNC One TV-Station DVR 1894:a006 [12465.028640] saa7134: card=25 -> ASUS TV-FM 7133 1043:4843 [12465.028648] saa7134: card=26 -> Pinnacle PCTV Stereo (saa7134) 11bd:002b [12465.028657] saa7134: card=27 -> Manli MuchTV M-TV002 [12465.028663] saa7134: card=28 -> Manli MuchTV M-TV001 [12465.028670] saa7134: card=29 -> Nagase Sangyo TransGear 3000TV 1461:050c [12465.028679] saa7134: card=30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card( 1019:4cb4 [12465.028687] saa7134: card=31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card 1019:4cb5 [12465.028695] saa7134: card=32 -> AVACS SmartTV [12465.028702] saa7134: card=33 -> AVerMedia DVD EZMaker 1461:10ff [12465.028710] saa7134: card=34 -> Noval Prime TV 7133 [12465.028717] saa7134: card=35 -> AverMedia AverTV Studio 305 1461:2115 [12465.028725] saa7134: card=36 -> UPMOST PURPLE TV 12ab:0800 [12465.028734] saa7134: card=37 -> Items MuchTV Plus / IT-005 [12465.028740] saa7134: card=38 -> Terratec Cinergy 200 TV 153b:1152 [12465.028749] saa7134: card=39 -> LifeView FlyTV Platinum Mini 5168:0212 4e42:0212 5169:1502 [12465.028760] saa7134: card=40 -> Compro VideoMate TV PVR/FM 185b:c100 [12465.028768] saa7134: card=41 -> Compro VideoMate TV Gold+ 185b:c100 [12465.028776] saa7134: card=42 -> Sabrent SBT-TVFM (saa7130) [12465.028783] saa7134: card=43 -> :Zolid Xpert TV7134 [12465.028790] saa7134: card=44 -> Empire PCI TV-Radio LE [12465.028796] saa7134: card=45 -> Avermedia AVerTV Studio 307 1461:9715 [12465.028805] saa7134: card=46 -> AVerMedia Cardbus TV/Radio (E500) 1461:d6ee [12465.028813] saa7134: card=47 -> Terratec Cinergy 400 mobile 153b:1162 [12465.028821] saa7134: card=48 -> Terratec Cinergy 600 TV MK3 153b:1158 [12465.028830] saa7134: card=49 -> Compro VideoMate Gold+ Pal 185b:c200 [12465.028838] saa7134: card=50 -> Pinnacle PCTV 300i DVB-T + PAL 11bd:002d [12465.028847] saa7134: card=51 -> ProVideo PV952 1540:9524 [12465.028855] saa7134: card=52 -> AverMedia AverTV/305 1461:2108 [12465.028863] saa7134: card=53 -> ASUS TV-FM 7135 1043:4845 [12465.028871] saa7134: card=54 -> LifeView FlyTV Platinum FM / Gold 5168:0214 5168:5214 1489:0214 5168:0304 [12465.028884] saa7134: card=55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere D 5168:0306 4e42:0306 [12465.028894] saa7134: card=56 -> Avermedia AVerTV 307 1461:a70a [12465.028903] saa7134: card=57 -> Avermedia AVerTV GO 007 FM 1461:f31f [12465.028911] saa7134: card=58 -> ADS Tech Instant TV (saa7135) 1421:0350 1421:0351 1421:0370 1421:1370 [12465.028924] saa7134: card=59 -> Kworld/Tevion V-Stream Xpert TV PVR7134 [12465.028931] saa7134: card=60 -> LifeView/Typhoon/Genius FlyDVB-T Duo Car 5168:0502 4e42:0502 1489:0502 [12465.028942] saa7134: card=61 -> Philips TOUGH DVB-T reference design 1131:2004 [12465.028951] saa7134: card=62 -> Compro VideoMate TV Gold+II [12465.028958] saa7134: card=63 -> Kworld Xpert TV PVR7134 [12465.028964] saa7134: card=64 -> FlyTV mini Asus Digimatrix 1043:0210 [12465.028973] saa7134: card=65 -> V-Stream Studio TV Terminator [12465.028980] saa7134: card=66 -> Yuan TUN-900 (saa7135) [12465.028986] saa7134: card=67 -> Beholder BeholdTV 409 FM 0000:4091 [12465.028995] saa7134: card=68 -> GoTView 7135 PCI 5456:7135 [12465.029003] saa7134: card=69 -> Philips EUROPA V3 reference design 1131:2004 [12465.029011] saa7134: card=70 -> Compro Videomate DVB-T300 185b:c900 [12465.029020] saa7134: card=71 -> Compro Videomate DVB-T200 185b:c901 [12465.029028] saa7134: card=72 -> RTD Embedded Technologies VFG7350 1435:7350 [12465.029036] saa7134: card=73 -> RTD Embedded Technologies VFG7330 1435:7330 [12465.029045] saa7134: card=74 -> LifeView FlyTV Platinum Mini2 14c0:1212 [12465.029053] saa7134: card=75 -> AVerMedia AVerTVHD MCE A180 1461:1044 [12465.029062] saa7134: card=76 -> SKNet MonsterTV Mobile 1131:4ee9 [12465.029070] saa7134: card=77 -> Pinnacle PCTV 40i/50i/110i (saa7133) 11bd:002e [12465.029078] saa7134: card=78 -> ASUSTeK P7131 Dual 1043:4862 [12465.029087] saa7134: card=79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO [12465.029094] saa7134: card=80 -> ASUS Digimatrix TV 1043:0210 [12465.029102] saa7134: card=81 -> Philips Tiger reference design 1131:2018 [12465.029110] saa7134: card=82 -> MSI TV@Anywhere plus 1462:6231 1462:8624 [12465.029120] saa7134: card=83 -> Terratec Cinergy 250 PCI TV 153b:1160 [12465.029128] saa7134: card=84 -> LifeView FlyDVB Trio 5168:0319 [12465.029137] saa7134: card=85 -> AverTV DVB-T 777 1461:2c05 1461:2c05 [12465.029147] saa7134: card=86 -> LifeView FlyDVB-T / Genius VideoWonder D 5168:0301 1489:0301 [12465.029156] saa7134: card=87 -> ADS Instant TV Duo Cardbus PTV331 0331:1421 [12465.029165] saa7134: card=88 -> Tevion/KWorld DVB-T 220RF 17de:7201 [12465.029173] saa7134: card=89 -> ELSA EX-VISION 700TV 1048:226c [12465.029182] saa7134: card=90 -> Kworld ATSC110/115 17de:7350 17de:7352 [12465.029191] saa7134: card=91 -> AVerMedia A169 B 1461:7360 [12465.029200] saa7134: card=92 -> AVerMedia A169 B1 1461:6360 [12465.029208] saa7134: card=93 -> Medion 7134 Bridge #2 16be:0005 [12465.029216] saa7134: card=94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV 5168:3306 5168:3502 5168:3307 4e42:3502 [12465.029229] saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138 [12465.029238] saa7134: card=96 -> Medion Md8800 Quadro 16be:0007 16be:0008 16be:000d [12465.029249] saa7134: card=97 -> LifeView FlyDVB-S /Acorp TV134DS 5168:0300 4e42:0300 [12465.029259] saa7134: card=98 -> Proteus Pro 2309 0919:2003 [12465.029267] saa7134: card=99 -> AVerMedia TV Hybrid A16AR 1461:2c00 [12465.029276] saa7134: card=100 -> Asus Europa2 OEM 1043:4860 [12465.029284] saa7134: card=101 -> Pinnacle PCTV 310i 11bd:002f [12465.029293] saa7134: card=102 -> Avermedia AVerTV Studio 507 1461:9715 [12465.029301] saa7134: card=103 -> Compro Videomate DVB-T200A [12465.029308] saa7134: card=104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid 0070:6700 0070:6701 0070:6702 0070:6703 0070:6704 0070:6705 [12465.029324] saa7134: card=105 -> Terratec Cinergy HT PCMCIA 153b:1172 [12465.029332] saa7134: card=106 -> Encore ENLTV 1131:2342 1131:2341 3016:2344 [12465.029344] saa7134: card=107 -> Encore ENLTV-FM 1131:230f [12465.029352] saa7134: card=108 -> Terratec Cinergy HT PCI 153b:1175 [12465.029360] saa7134: card=109 -> Philips Tiger - S Reference design [12465.029367] saa7134: card=110 -> Avermedia M102 1461:f31e [12465.029375] saa7134: card=111 -> ASUS P7131 4871 1043:4871 [12465.029384] saa7134: card=112 -> ASUSTeK P7131 Hybrid 1043:4876 [12465.029392] saa7134: card=113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card 1019:4cb6 [12465.029401] saa7134: card=114 -> KWorld DVB-T 210 17de:7250 [12465.029409] saa7134: card=115 -> Sabrent PCMCIA TV-PCB05 0919:2003 [12465.029418] saa7134: card=116 -> 10MOONS TM300 TV Card 1131:2304 [12465.029426] saa7134: card=117 -> Avermedia Super 007 1461:f01d [12465.029435] saa7134: card=118 -> Beholder BeholdTV 401 0000:4016 [12465.029443] saa7134: card=119 -> Beholder BeholdTV 403 0000:4036 [12465.029451] saa7134: card=120 -> Beholder BeholdTV 403 FM 0000:4037 [12465.029459] saa7134: card=121 -> Beholder BeholdTV 405 0000:4050 [12465.029468] saa7134: card=122 -> Beholder BeholdTV 405 FM 0000:4051 [12465.029476] saa7134: card=123 -> Beholder BeholdTV 407 0000:4070 [12465.029484] saa7134: card=124 -> Beholder BeholdTV 407 FM 0000:4071 [12465.029493] saa7134: card=125 -> Beholder BeholdTV 409 0000:4090 [12465.029501] saa7134: card=126 -> Beholder BeholdTV 505 FM 5ace:5050 [12465.029510] saa7134: card=127 -> Beholder BeholdTV 507 FM / BeholdTV 509 5ace:5070 5ace:5090 [12465.029520] saa7134: card=128 -> Beholder BeholdTV Columbus TVFM 0000:5201 [12465.029528] saa7134: card=129 -> Beholder BeholdTV 607 FM 5ace:6070 [12465.029537] saa7134: card=130 -> Beholder BeholdTV M6 5ace:6190 [12465.029545] saa7134: card=131 -> Twinhan Hybrid DTV-DVB 3056 PCI 1822:0022 [12465.029554] saa7134: card=132 -> Genius TVGO AM11MCE [12465.029560] saa7134: card=133 -> NXP Snake DVB-S reference design [12465.029567] saa7134: card=134 -> Medion/Creatix CTX953 Hybrid 16be:0010 [12465.029576] saa7134: card=135 -> MSI TV@nywhere A/D v1.1 1462:8625 [12465.029584] saa7134: card=136 -> AVerMedia Cardbus TV/Radio (E506R) 1461:f436 [12465.029592] saa7134: card=137 -> AVerMedia Hybrid TV/Radio (A16D) 1461:f936 [12465.029601] saa7134: card=138 -> Avermedia M115 1461:a836 [12465.029609] saa7134: card=139 -> Compro VideoMate T750 185b:c900 [12465.029617] saa7134: card=140 -> Avermedia DVB-S Pro A700 1461:a7a1 [12465.029626] saa7134: card=141 -> Avermedia DVB-S Hybrid+FM A700 1461:a7a2 [12465.029634] saa7134: card=142 -> Beholder BeholdTV H6 5ace:6290 [12465.029642] saa7134: card=143 -> Beholder BeholdTV M63 5ace:6191 [12465.029651] saa7134: card=144 -> Beholder BeholdTV M6 Extra 5ace:6193 [12465.029659] saa7134: card=145 -> AVerMedia MiniPCI DVB-T Hybrid M103 1461:f636 1461:f736 [12465.029669] saa7134: card=146 -> ASUSTeK P7131 Analog [12465.029676] saa7134: card=147 -> Asus Tiger 3in1 1043:4878 [12465.029684] saa7134: card=148 -> Encore ENLTV-FM v5.3 1a7f:2008 [12465.029693] saa7134: card=149 -> Avermedia PCI pure analog (M135A) 1461:f11d [12465.029701] saa7134: card=150 -> Zogis Real Angel 220 [12465.029708] saa7134: card=151 -> ADS Tech Instant HDTV 1421:0380 [12465.029716] saa7134: card=152 -> Asus Tiger Rev:1.00 1043:4857 [12465.029725] saa7134: card=153 -> Kworld Plus TV Analog Lite PCI 17de:7128 [12465.029733] saa7134: card=154 -> Avermedia AVerTV GO 007 FM Plus 1461:f31d [12465.029742] saa7134: card=155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid 0070:6706 0070:6708 [12465.029752] saa7134: card=156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid 0070:6707 0070:6709 0070:670a [12465.029763] saa7134: card=157 -> Avermedia AVerTV Studio 507UA 1461:a11b [12465.029772] saa7134: card=158 -> AVerMedia Cardbus TV/Radio (E501R) 1461:b7e9 [12465.029780] saa7134: card=159 -> Beholder BeholdTV 505 RDS 0000:505b [12465.029789] saa7134: card=160 -> Beholder BeholdTV 507 RDS 0000:5071 [12465.029797] saa7134: card=161 -> Beholder BeholdTV 507 RDS 0000:507b [12465.029806] saa7134: card=162 -> Beholder BeholdTV 607 FM 5ace:6071 [12465.029815] saa7134: card=163 -> Beholder BeholdTV 609 FM 5ace:6090 [12465.029823] saa7134: card=164 -> Beholder BeholdTV 609 FM 5ace:6091 [12465.029832] saa7134: card=165 -> Beholder BeholdTV 607 RDS 5ace:6072 [12465.029840] saa7134: card=166 -> Beholder BeholdTV 607 RDS 5ace:6073 [12465.029849] saa7134: card=167 -> Beholder BeholdTV 609 RDS 5ace:6092 [12465.029857] saa7134: card=168 -> Beholder BeholdTV 609 RDS 5ace:6093 [12465.029866] saa7134: card=169 -> Compro VideoMate S350/S300 185b:c900 [12465.029874] saa7134: card=170 -> AverMedia AverTV Studio 505 1461:a115 [12465.029883] saa7134: card=171 -> Beholder BeholdTV X7 5ace:7595 [12465.029892] saa7134: card=172 -> RoverMedia TV Link Pro FM 19d1:0138 [12465.029900] saa7134: card=173 -> Zolid Hybrid TV Tuner PCI 1131:2004 [12465.029909] saa7134: card=174 -> Asus Europa Hybrid OEM 1043:4847 [12465.029917] saa7134: card=175 -> Leadtek Winfast DTV1000S 107d:6655 [12465.029926] saa7134: card=176 -> Beholder BeholdTV 505 RDS 0000:5051 [12465.029934] saa7134: card=177 -> Hawell HW-404M7 [12465.029941] saa7134: card=178 -> Beholder BeholdTV H7 [12465.029948] saa7134: card=179 -> Beholder BeholdTV A7 [12465.029955] saa7134: card=180 -> Avermedia PCI M733A 1461:4155 1461:4255 [12465.029967] saa7130[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected] [12465.030033] saa7130[0]: can't get MMIO memory @ 0x0 [12465.030051] saa7134: probe of 0000:01:07.0 failed with error -16 [12465.053892] saa7134 ALSA driver for DMA sound loaded [12465.053900] saa7134 ALSA: no saa7134 cards found tvtime-scanner Leyendo la configuración de /etc/tvtime/tvtime.xml Leyendo la configuración de /home/ricardo/.tvtime/tvtime.xml Escaneando usando la norma de TV NTSC. /home/ricardo/.tvtime/stationlist.xml: No existing NTSC station list "Custom". videoinput: Cannot open capture device /dev/video0: No existe el dispositivo o la dirección

    Read the article

  • USB mouse does not work on boot

    - by Uku Loskit
    My problem is pretty much a duplicate of the one described in USB mouse late to load , but the solution there has not worked for me. I'm running the same OS and experiencing the exact same issue. It disappears after 10 seconds or so. Booting with the options specified in the other question did not fix it :/ Thanks in advance. sheepz@sheepz-desktop:~$ dmesg | egrep "hci|usb" [ 0.188000] usbcore: registered new interface driver usbfs [ 0.188000] usbcore: registered new interface driver hub [ 0.188000] usbcore: registered new device driver usb [ 0.358613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.358627] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.358637] uhci_hcd: USB Universal Host Controller Interface driver [ 0.358683] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.358691] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.358695] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.358726] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.358758] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100 [ 0.358927] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.358932] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.358935] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.358964] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 0.358991] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 [ 0.359132] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.359137] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.359139] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.359165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 0.359193] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300 [ 0.359327] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.359332] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.359334] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.359360] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 0.359387] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 0.731933] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 1.023859] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 16.136175] usb 1-2: device descriptor read/64, error -110 [ 31.352481] usb 1-2: device descriptor read/64, error -110 [ 31.568485] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 46.680794] usb 1-2: device descriptor read/64, error -110 [ 61.903555] usb 1-2: device descriptor read/64, error -110 [ 62.119671] usb 1-2: new full speed USB device using uhci_hcd and address 5 [ 72.541078] usb 1-2: device not accepting address 5, error -110 [ 72.653194] usb 1-2: new full speed USB device using uhci_hcd and address 6 [ 83.066637] usb 1-2: device not accepting address 6, error -110 [ 83.178615] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 83.562546] usbcore: registered new interface driver hiddev [ 83.578827] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input3 [ 83.579016] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0 [ 83.579244] usbcore: registered new interface driver usbhid [ 83.579246] usbhid: USB HID core driver [114025.224407] usb 3-1: USB disconnect, address 2 sheepz@sheepz-desktop:~$ dmesg | egrep "hci|usb" [ 0.188000] usbcore: registered new interface driver usbfs [ 0.188000] usbcore: registered new interface driver hub [ 0.188000] usbcore: registered new device driver usb [ 0.358613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.358627] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.358637] uhci_hcd: USB Universal Host Controller Interface driver [ 0.358683] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.358691] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.358695] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.358726] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.358758] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100 [ 0.358927] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.358932] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.358935] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.358964] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 0.358991] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 [ 0.359132] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.359137] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.359139] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.359165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 0.359193] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300 [ 0.359327] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.359332] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.359334] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.359360] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 0.359387] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 0.731933] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 1.023859] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 16.136175] usb 1-2: device descriptor read/64, error -110 [ 31.352481] usb 1-2: device descriptor read/64, error -110 [ 31.568485] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 46.680794] usb 1-2: device descriptor read/64, error -110 [ 61.903555] usb 1-2: device descriptor read/64, error -110 [ 62.119671] usb 1-2: new full speed USB device using uhci_hcd and address 5 [ 72.541078] usb 1-2: device not accepting address 5, error -110 [ 72.653194] usb 1-2: new full speed USB device using uhci_hcd and address 6 [ 83.066637] usb 1-2: device not accepting address 6, error -110 [ 83.178615] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 83.562546] usbcore: registered new interface driver hiddev [ 83.578827] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input3 [ 83.579016] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0 [ 83.579244] usbcore: registered new interface driver usbhid [ 83.579246] usbhid: USB HID core driver

    Read the article

  • HTG Explains: Why is Printer Ink So Expensive?

    - by Chris Hoffman
    Printer ink is expensive, more expensive per drop than fine champagne or even human blood. If you haven’t gone paperless, you’ll notice that you’re paying a lot for new ink cartridges — more than seems reasonable. Purchasing the cheapest inkjet printer and buying official ink cartridge replacements is the most expensive thing you can do. There are ways to save money on ink if you must continue to print documents. Cheap Printers, Expensive Ink Ink jet printers are often very cheap. That’s because they’re sold at cost, or even at a loss — the manufacturer either makes no profit from the printer itself or loses money. The manufacturer will make most of its money from the printer cartridges you buy later. Even if the company does make a bit of money from each printer sold, it makes a much larger profit margin on ink. Rather than selling you a printer that may be rather expensive, they want to sell you a cheap printer and make money on an ongoing basis by providing expensive printer ink. It’s been compared to the razor model — sell a razor cheaply and mark up the razor blades. Rather than making a one-time profit on the razor, you’ll make continuing profit as the customer keeps buying razor blade replacements — or ink, in this case. Many printer manufacturers go out of their way to make it difficult for you to use unofficial ink cartridges, building microchips into their official ink cartridges. If you use an unofficial cartridge or refill an official cartridge, the printer may refuse to use it. Lexmark once argued in court that unofficial microchips that enable third-party ink cartridges would violate their copyright and Lexmark has argued that creating an unofficial microchip to bypass this restriction on third-party ink would violate Lexmark’s copyright and be illegal under the US DMCA. Luckily, they lost this argument. What Printer Companies Say Printer companies have put forth their own arguments in the past, attempting to justify the high cost of official ink cartridges and microchips that block any competition. In a Computer World story from 2010, HP argued that they spend a billion dollars each year on “ink research and development.” They point out that printer ink “must be formulated to withstand heating to 300 degrees, vaporization, and being squirted at 30 miles per hour, at a rate of 36,000 drops per second, through a nozzle one third the size of a human hair. After all that it must dry almost instantly on the paper.” They also argue that printers have become more efficient and use less ink to print, while third-party cartridges are less reliable. Companies that use microchips in their ink cartridges argue that only the microchip has the ability to enforce an expiration date, preventing consumers from using old ink cartridges. There’s something to all these arguments, sure — but they don’t seem to justify the sky-high cost of printer ink or the restriction on using third-party or refilled cartridges. Saving Money on Printing Ultimately, the price of something is what people are willing to pay and printer companies have found that most consumers are willing to pay this much for ink cartridge replacements. Try not to fall for it: Don’t buy the cheapest inkjet printer. Consider your needs when buying a printer and do some research. You’ll save more money in the long run. Consider these basic tips to save money on printing: Buy Refilled Cartridges: Refilled cartridges from third parties are generally much cheaper. Printer companies warn us away from these, but they often work very well. Refill Your Own Cartridges: You can get do-it-yourself kits for refilling your own printer ink cartridges, but this can be messy. Your printer may refuse to accept a refilled cartridge if the cartridge contains a microchip. Switch to a Laser Printer: Laser printers use toner, not ink cartridges. If you print a lot of black and white documents, a laser printer can be cheaper. Buy XL Cartridges: If you are buying official printer ink cartridges, spend more money each time. The cheapest ink cartridges won’t contain much ink at all, while larger “XL” ink cartridges will contain much more ink for only a bit more money. It’s often cheaper to buy in bulk. Avoid Printers With Tri-Color Ink Cartridges: If you’re printing color documents, you’ll want to get a printer that uses separate ink cartridges for all its colors. For example, let’s say your printer has a “Color” cartridge that contains blue, green, and red ink. If you print a lot of blue documents and use up all your blue ink, the Color cartridge will refuse to function — now all you can do is throw away your cartridge and buy a new one, even if the green and red ink chambers are full. If you had a printer with separate color cartridges, you’d just have to replace the blue cartridge. If you’ll be buying official ink cartridges, be sure to compare the cost of cartridges when buying a printer. The cheapest printer may be more expensive in the long run. Of course, you’ll save the most money if you stop printing entirely and go paperless, keeping digital copies of your documents instead of paper ones. Image Credit: Cliva Darra on Flickr     

    Read the article

  • Intel Xeon 5600 (Westmere-EP) and AMD Magny-Cours Performance Update

    - by jchang
    HP has just released TPC-C and TPC-E results for the ProLiant DL380G7 with 2 Xeon 5680 3.33GHz 6-core processor, allowing a direct comparison with their DL385G& with 2 Opteron 6176 2.3GHz 12-core processors. Last month I complained about the lack of performance results for the Intel Xeon 5600 6-core 32nm processor line for 2-way systems. This might have been deliberate to not complicate the message for the Xeon 7500 8-core 45nm (for 4-way+ systems) launch two weeks later. http://sqlblog.com/blogs/joe_chang/archive/2010/04/07/intel-xeon-5600-westmere-ep-and-7500-nehalem-ex.aspx...(read more)

    Read the article

  • Why is Star Craft II lagging with these specs? [closed]

    - by Kev
    17.3" FULL HD (1920X1080) LED LCD w/nVIDIA GeForce® GT 425M w/1GB GDDR3 + Intel GMA HD4500 i also got the 640m core i7, i have 8 gb ram but for some damn reason, when there is a batle in progress it appears as if my graphics card or something is not powerful enough, shouldn't these specs be more than enough to handle star craft II? what could i do to improve my laptop? i also got the 64 bit os

    Read the article

  • Ubuntu 10.04 - unable to install Arduino

    - by Newbie
    Hello! At the moment, I try to install Arduino on my Ubuntu 10.04 (32 Bit) computer. I downloaded the latest release at http://arduino.cc/en/Main/Software, cd'ed to the directory and unziped the package. When I try to run ./arduino , I get following error: Exception in thread "main" java.lang.ExceptionInInitializerError at processing.app.Base.main(Base.java:112) Caused by: java.awt.HeadlessException at sun.awt.HeadlessToolkit.getMenuShortcutKeyMask(HeadlessToolkit.java:231) at processing.core.PApplet.<clinit>(Unknown Source) ... 1 more Here is my java -version output: java version "1.6.0_20" OpenJDK Runtime Environment (IcedTea6 1.9.5) (6b20-1.9.5-0ubuntu1~10.04.1) OpenJDK Server VM (build 19.0-b09, mixed mode) Any suggestions on this? I try to install arduino without the 'arduino' package. I tried to install it with apt-get (sudo apt-get install arduino). When I try to start arduino (using arduino command) will cause following error: Exception in thread "main" java.lang.ExceptionInInitializerError at processing.app.Preferences.load(Preferences.java:553) at processing.app.Preferences.load(Preferences.java:549) at processing.app.Preferences.init(Preferences.java:142) at processing.app.Base.main(Base.java:188) Caused by: java.awt.HeadlessException at sun.awt.HeadlessToolkit.getMenuShortcutKeyMask(HeadlessToolkit.java:231) at processing.core.PApplet.<clinit>(PApplet.java:224) ... 4 more Update: I saw that I installed several versions of jre (sun and open). So I uninstalled the open jre. Now, when calling arduino I get a new error: java.lang.UnsatisfiedLinkError: no rxtxSerial in java.library.path thrown while loading gnu.io.RXTXCommDriver Exception in thread "main" java.lang.UnsatisfiedLinkError: no rxtxSerial in java.library.path at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1734) at java.lang.Runtime.loadLibrary0(Runtime.java:823) at java.lang.System.loadLibrary(System.java:1028) at gnu.io.CommPortIdentifier.<clinit>(CommPortIdentifier.java:123) at processing.app.Editor.populateSerialMenu(Editor.java:965) at processing.app.Editor.buildToolsMenu(Editor.java:717) at processing.app.Editor.buildMenuBar(Editor.java:502) at processing.app.Editor.<init>(Editor.java:194) at processing.app.Base.handleOpen(Base.java:698) at processing.app.Base.handleOpen(Base.java:663) at processing.app.Base.handleNew(Base.java:578) at processing.app.Base.<init>(Base.java:318) at processing.app.Base.main(Base.java:207)

    Read the article

  • Intel Xeon 5600 (Westmere-EP) and 7500 (Nehalem-EX)

    - by jchang
    Intel Xeon 5600 (Westmere-EP) and 7500 (Nehalem-EX) Performance Intel launched the Xeon 5600 series (Westmere-EP, 32nm) six-core processors on 16 March 2010 without any TPC benchmark results. In the performance world, no results almost always mean bad or not good results. Yet there is every reason to believe that the Xeon 5600 series with six-cores (X models only) will performance exactly as expected for a 50% increase in the number of cores at the same frequency (as the 5500) with no system level...(read more)

    Read the article

  • What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives?

    - by Jason Fitzpatrick
    From tiny laptop hard drives to beefier desktop models, traditional disk-based hard drives have a very bold warning on them: DO NOT COVER THIS HOLE. What exactly is the hole and what terrible fate would befall you if you covered it? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

    Read the article

  • Z600 Workstation ACPI Fan Noise

    - by dpb
    Hi -- I have an HP z600 workstation that has the FAN running full when idle. In fact, after the boot, the fan never slows down or varies. I looked in dmesg, and noticed this: [ 1.516778] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.516781] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.516786] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 1.519868] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.519872] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624638] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624642] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624726] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624729] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624802] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624805] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624895] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624898] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624977] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624981] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.625070] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.625074] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.625153] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.625157] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS Anyone know what could be done to fix this?

    Read the article

  • CMUS Error: opening audio device: No such device

    - by clamp
    I cant seem to play any audio with CMUS because it always gives the above error the output of lspci -v | grep -A7 -i "audio" gives 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASRock Incorporation Device c892 Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at dff00000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) what could be the problem?

    Read the article

  • HTG Explains: Do Non-Windows Platforms Like Mac, Android, iOS, and Linux Get Viruses?

    - by Chris Hoffman
    Viruses and other types of malware seem largely confined to Windows in the real world. Even on a Windows 8 PC, you can still get infected with malware. But how vulnerable are other operating systems to malware? When we say “viruses,” we’re actually talking about malware in general. There’s more to malware than just viruses, although the word virus is often used to talk about malware in general. Why Are All the Viruses For Windows? Not all of the malware out there is for Windows, but most of it is. We’ve tried to cover why Windows has the most viruses in the past. Windows’ popularity is definitely a big factor, but there are other reasons, too. Historically, Windows was never designed for security in the way that UNIX-like platforms were — and every popular operating system that’s not Windows is based on UNIX. Windows also has a culture of installing software by searching the web and downloading it from websites, whereas other platforms have app stores and Linux has centralized software installation from a secure source in the form of its package managers. Do Macs Get Viruses? The vast majority of malware is designed for Windows systems and Macs don’t get Windows malware. While Mac malware is much more rare, Macs are definitely not immune to malware. They can be infected by malware written specifically for Macs, and such malware does exist. At one point, over 650,000 Macs were infected with the Flashback Trojan. [Source] It infected Macs through the Java browser plugin, which is a security nightmare on every platform. Macs no longer include Java by default. Apple also has locked down Macs in other ways. Three things in particular help: Mac App Store: Rather than getting desktop programs from the web and possibly downloading malware, as inexperienced users might on Windows, they can get their applications from a secure place. It’s similar to a smartphone app store or even a Linux package manager. Gatekeeper: Current releases of Mac OS X use Gatekeeper, which only allows programs to run if they’re signed by an approved developer or if they’re from the Mac App Store. This can be disabled by geeks who need to run unsigned software, but it acts as additional protection for typical users. XProtect: Macs also have a built-in technology known as XProtect, or File Quarantine. This feature acts as a blacklist, preventing known-malicious programs from running. It functions similarly to Windows antivirus programs, but works in the background and checks applications you download. Mac malware isn’t coming out nearly as quick as Windows malware, so it’s easier for Apple to keep up. Macs are certainly not immune to all malware, and someone going out of their way to download pirated applications and disable security features may find themselves infected. But Macs are much less at risk of malware in the real world. Android is Vulnerable to Malware, Right? Android malware does exist and companies that produce Android security software would love to sell you their Android antivirus apps. But that isn’t the full picture. By default, Android devices are configured to only install apps from Google Play. They also benefit from antimalware scanning — Google Play itself scans apps for malware. You could disable this protection and go outside Google Play, getting apps from elsewhere (“sideloading”). Google will still help you if you do this, asking if you want to scan your sideloaded apps for malware when you try to install them. In China, where many, many Android devices are in use, there is no Google Play Store. Chinese Android users don’t benefit from Google’s antimalware scanning and have to get their apps from third-party app stores, which may contain infected copies of apps. The majority of Android malware comes from outside Google Play. The scary malware statistics you see primarily include users who get apps from outside Google Play, whether it’s pirating infected apps or acquiring them from untrustworthy app stores. As long as you get your apps from Google Play — or even another secure source, like the Amazon App Store — your Android phone or tablet should be secure. What About iPads and iPhones? Apple’s iOS operating system, used on its iPads, iPhones, and iPod Touches, is more locked down than even Macs and Android devices. iPad and iPhone users are forced to get their apps from Apple’s App Store. Apple is more demanding of developers than Google is — while anyone can upload an app to Google Play and have it available instantly while Google does some automated scanning, getting an app onto Apple’s App Store involves a manual review of that app by an Apple employee. The locked-down environment makes it much more difficult for malware to exist. Even if a malicious application could be installed, it wouldn’t be able to monitor what you typed into your browser and capture your online-banking information without exploiting a deeper system vulnerability. Of course, iOS devices aren’t perfect either. Researchers have proven it’s possible to create malicious apps and sneak them past the app store review process. [Source] However, if a malicious app was discovered, Apple could pull it from the store and immediately uninstall it from all devices. Google and Microsoft have this same ability with Android’s Google Play and Windows Store for new Windows 8-style apps. Does Linux Get Viruses? Malware authors don’t tend to target Linux desktops, as so few average users use them. Linux desktop users are more likely to be geeks that won’t fall for obvious tricks. As with Macs, Linux users get most of their programs from a single place — the package manager — rather than downloading them from websites. Linux also can’t run Windows software natively, so Windows viruses just can’t run. Linux desktop malware is extremely rare, but it does exist. The recent “Hand of Thief” Trojan supports a variety of Linux distributions and desktop environments, running in the background and stealing online banking information. It doesn’t have a good way if infecting Linux systems, though — you’d have to download it from a website or receive it as an email attachment and run the Trojan. [Source] This just confirms how important it is to only run trusted software on any platform, even supposedly secure ones. What About Chromebooks? Chromebooks are locked down laptops that only run the Chrome web browser and some bits around it. We’re not really aware of any form of Chrome OS malware. A Chromebook’s sandbox helps protect it against malware, but it also helps that Chromebooks aren’t very common yet. It would still be possible to infect a Chromebook, if only by tricking a user into installing a malicious browser extension from outside the Chrome web store. The malicious browser extension could run in the background, steal your passwords and online banking credentials, and send it over the web. Such malware could even run on Windows, Mac, and Linux versions of Chrome, but it would appear in the Extensions list, would require the appropriate permissions, and you’d have to agree to install it manually. And Windows RT? Microsoft’s Windows RT only runs desktop programs written by Microsoft. Users can only install “Windows 8-style apps” from the Windows Store. This means that Windows RT devices are as locked down as an iPad — an attacker would have to get a malicious app into the store and trick users into installing it or possibly find a security vulnerability that allowed them to bypass the protection. Malware is definitely at its worst on Windows. This would probably be true even if Windows had a shining security record and a history of being as secure as other operating systems, but you can definitely avoid a lot of malware just by not using Windows. Of course, no platform is a perfect malware-free environment. You should exercise some basic precautions everywhere. Even if malware was eliminated, we’d have to deal with social-engineering attacks like phishing emails asking for credit card numbers. Image Credit: stuartpilbrow on Flickr, Kansir on Flickr     

    Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >