Search Results

Search found 4063 results on 163 pages for 'intel'.

Page 27/163 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Multiple Graphics Cards on Fedora 15 (Gnome 3)

  - by Michael

  I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

  Read the article

• Upgrade Intel Xeon Prestonia to a 64-bit processor

  - by IDisposable

  In theory, could I upgrade a mPGA604-socket motherboard with a Prestonia processor to some Intel Xeon processor with 64-bit? I've got a Dell PowerEdge 1750 with dual 2.8GHz Xeon processors running my Windows Home Server machine. I want to upgrade to the upcoming Vail release, but it is 64-bit only. The processors are Prestonia-core, which is pre-64bit, but I was wondering if it was possible to swap in some pin-compatible later generation processor. According to wikipedia, the mPGA604-socket continues to be used for several later generations that do have same pinout. So, IN THEORY, could I swap in a 64-bit, like a Nocona-core?

  Read the article

• Restore using time machine from an macbook to an macbook pro (first intel)

  - by Anders Nørgaard

  Hello.. My girlfriend have Macbook 10.6.3, the first plastic version. the screen broke an its at service store now. In the mean time, i have tried to restore from hers TM backup to my old macbook pro 10.6.3 (the first intel version). Everything seems to work out fine, but when its finish, it says reboot, but nothing happens. When i hold down the power button, powering down, and starts again, its come up with the grey roll down screen "you need to restart your machine again" in different languages. I have tried the restore procedure over again 2 times, and every time it ends up like this... Anyone have a suggestion what to do ? Thanks - Anders.

  Read the article

• TRIM in centos 5.X?

  - by Frank Farmer

  I've got a bunch of centos 5 boxes with Intel X-25 drives (x25-m in dev, x25-e in prod, I think). We're seeing severely degraded disk performance on one of our dev boxes (which easily does 5+ gb of writes every day, meaning we write the full drive's worth of data several times a month). The box in question: Intel x25-m Ext3 (which doesn't support TRIM) centos 5 vmware ESXi Wikipedia mentions that newer versions of hdparm (which centos5 doesn't include) can bulk-TRIM free blocks. This utility also sounds potentially useful: http://blog.patshead.com/2009/12/a-quick-and-dirty-wipersh-fix-for-intel-x25-m.html Disk write performance has dropped to <1 MB/sec while copying a 300 meg directory on this system, as of a month or so ago -- it used to be able to perform the same copy operation at least 5 times faster. What can I do to recover performance on this system?

  Read the article

• ubuntu 9.10 screen flickering problem on Thinkpad R31 with Intel 83830 Graphics

  - by PA

  I am trying to revitalize an old Thinkpad R31 that has the Intel 82830 graphics and only 256 MB of RAM. I have tried a Xubuntu 9.10 Live CD. After booting the screen blinks so much that it is practically unreadable. I have searched for updated IBM Thinkpad drivers but I only found drivers for Windows on the Thinkpad support web site. EDIT: I have changed the title and the description. It is not a problem of the drivers. It seems to be a problem with the kernel. See my own answer below.

  Read the article

• Linux driver for Intel ICH10R

  - by Pablo Santa Cruz

  Hi! I would like to know what 64-bit Linux distribution can I use with an Intel ICH10R RAID. I have tried CentOS 5.2 and Ubuntu Server 8.04. Neither support that raid controller. Also, I would like to know where do I setup the RAID-5 I want to use. I am using a TYAN S7002 motherboard and the BIOS software does not include an option to configure the RAID as I am used to do with Dell servers... Thanks a lot in advance.

  Read the article

• Selection between two laptops for casual gaming [closed]

  - by Prabhpreet

  I have selected two laptops that meet my budget. Here are the differences: Laptop #1: 4GB Ram, Intel Core i5 2450M 2nd Gen processor w/ 2.5 Ghz clockspeed NVIDIA GeForce GT 520MX DDR3 1 GB Dedicated Graphics 750 GB SATA II Hard disk USB 2.0 Ports 6 hrs battery life Laptop #2: 4 GB Ram, Intel Core i5 3210M 3rd Gen processor w/ 2.5 Ghz clockspeed Integrated Intel HD Graphics 4000 500 GB SATA Hard disk USB 3.0 Ports 3 hrs battery life (This concerns me) First and foremost, does dedicated graphics matter for a casual gamer like me? Secondly, does the generation of the processors make a difference despite the same clockspeed. Thirdly, do usb 3.0 ports make a difference? And lastly, which laptop is more future proof? Please help me out. Thanks!

  Read the article

• Install OS X 10.5 on Intel 1GB Macbook

  - by Moshe

  I'm trying to install Mac OS X 10.5 on a MacBook that previously had 10.4 on it. i am getting an error after selecting the language. What could be causing a box on the screen that says: Mac OS X cannot be installed on this computer. It's an Intel MacBook with 1GB of DDR2 memory. 80GB hard drive. It has been formatted now, so there's no going back. According to the System Profiler on the 10.5 boot CD, the MacBook is version MacBook2,1. Thanks!

  Read the article

• Windows 8 Disk Mirroring vs Intel Fake RAID

  - by Johnny W

  So Windows 8 is out and I have a new motherboard. I wish to create a RAID 1 coupling between two HDDs -- for storage purposes only (my OS is on an SSD) -- but I don't know which is the best route to take. My motherboard (Z77 chipset) comes with the age old Intel Fake RAID, but since I only wish to use my RAID for storage, I wondered if I might be better to use Windows 8 Disk Mirroring. Can anyone advise which is better? Or perhaps the pros and cons of each, if that's too contentious? I just can't see the benefit of FakeRAID. You can see my current setup here, if that might change things(?): Thanks!

  Read the article

• On boot firmware request for intel GMA 3100 chipset timing out

  - by Yannick M.

  I am currently in the process of installing a Gentoo linux box with a Vanilla 2.6.29-r5 kernel with gentoo-xen-kernel patches in order to run the Xen Hypervisor. After rebooting with the new kernel, the booting process seemed to hang on: [ 0.863005] platform microcode: firmware: requesting intel-ucode/06-0f-07 [ 60.863442] Microcode Update Driver: v2.00-xen <[email protected]>, Peter Oruba Apparently the firmware request times out after 60 seconds (/sys/class/firmware/timeout) and booting just continues. I have done some research and have found that on RHEL-4 this problem was related to the mount of /sys changed and the firmware.agent hotplug script couldn't parse the line correctly. However I am having some difficulty tracking down how to fix this on Gentoo. Any and all ideas are greatly appreciated! Thanks

  Read the article

• Solaris cc segfaults when compiling rsync on intel platform

  - by PP

  I am trying to compile rsync-3.0.7 on Solaris 5.10 on an Intel chipset. When running ./configure I see the following (obviously erroneous lines): checking size of int... 0 checking size of long... 0 checking size of long long... 0 checking size of short... 0 checking size of int16_t... 0 checking size of uint16_t... 0 In config.log I see the following lines: configure.sh:5448: /tool/sunstudio12.1/bin/cc -xc99=all -o conftest -g -DHAVE_CONFIG_H conftest.c >&5 "conftest.c", line 123: warning: statement not reached cc: Fatal error in cc : Segmentation Fault configure.sh:5448: $? = 1 configure.sh: program exited with status 1 Segmentation fault? What could be causing a simple test script to segfault during compilation?

  Read the article

• Currently well suited SATA2-SSDs for Laptop usage

  - by danilo

  I am looking for a solid state drive for my laptop. My dillemma: I have been waiting for the new Intel SSDs since Q3/2010, as I've heard they should be better and cheaper, due to lower memory manufacturing costs. Now it looks like the new Intel drives are very fast, but still expensive. I would still buy one of them if I could benefit from the full speed. My hardware only has a SATA-2 port though. Thus, my question: Is it worthwhile to buy one of those new Intel SSDs made for SATA-3 if I won't be able to use the full speed? Are there any other promising new SSDs that will be released soon? (Inside the next 1-2 months) If I wouldn't make a good deal buying the newer, faster drives, what drives can you recommend? I don't consider this question subjective, as I am mainly looking for answers concerning the SATA-2/SATA-3 conflict.

  Read the article

• Software/FakeRAID: Windows 8 Disk Mirroring vs Intel Onboard

  - by Johnny W

  So Windows 8 is out and I have a new motherboard. I wish to create a RAID 1 coupling between two HDDs -- for storage purposes only (my OS is on an SSD) -- but I don't know which is the best route to take. My motherboard (Z77 chipset) comes with the age old Intel Fake RAID, but since I only wish to use my RAID for storage, I wondered if I might be better to use Windows 8 Disk Mirroring. Can anyone advise which is better? Or perhaps the pros and cons of each, if that's too contentious? I just can't see the benefit of FakeRAID. You can see my current setup here, if that might change things(?): Thanks!

  Read the article

• Intel Rapid Storage Technology - Raid5 is very slow

  - by Cederstrom

  Hi, I build a computer with a raid5, using the motherboards raid controller (ASUS P7H57D-V EVO - intel Rapid Storage Technology). The read and write are however very slow, when using the raid controller :( - I am using Windows 2008 R2, and when using the windows software raid, it was ok in speed - so there must be an issue with the controller? Im using 6 disks on 2TB each. Do anyone have any idea why its so slow, and how to fix it? I rather not pick the easy solutiuon of "just buy a raid controller" :| If you need more info about my setup, please just ask. Thanks :)

  Read the article

• Intel SASWT4I SAS/SATA Controller Question

  - by Joe Hopfgartner

  Hey there! I want to assemble a cheap storage sytem based on the Norco RPC-4020 Case. When searching for controllers I found this one: Intel® RAID Controller SASWT4I This is a quote form the Spec Sheet: Scalability. Supports up to 122 physical devices in SAS mode which is ideal for employing JBODs (Just a Bunch Of Disks) or up to 14 devices in RAID 0, 1, 1E/10E mode through direct connect device attachment or through expander backplane support. Does that mean I can attatch 14 SATA drives directly to the controller using SFF-8087 - 4x SATA breakout cables? That would be nice because then I can choose a mainboard that has 6 Onboard SATA and i can connect all 20 bays while only spending 155$ on the controller and like another 100$ on cables. Would that work? And why is it 14 and not 16 when there are 4 Ports? I am really confused about all the breakout/fanout/(edge-)expanding/multiplying/channel stuff...

  Read the article

• Intel HD 4000 driver not working

  - by Sagar Parakh

  I have a Dell Inspiron 15r se 7520. I have upgraded my system to Windows 8.1 few days back. After the upgrade, my Intel HD 4000 graphics driver stopped working. I have downloaded the latest driver from Dell website but during installation it said that my graphics driver is not compatible or validated and also my dedicated graphics driver AMD ATI Raedon HD 7730m also stopped working. There is also a problem with my screen brightness: I am unable to change it. How to make my graphics driver work?

  Read the article

• Can I run virtualized 64-bit Operating Systems if my CPU doesn't support VT-X?

  - by tintinmj

  I have installed VMWare 10.0 workstation on my Compaq CQ60-615DX laptop. The Operating System is Windows 7 Home Premium. When I tried to run Ubuntu 14.04 64-bit in a virtual machine in VMWare I get an error saying: This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x. For more detailed information, see http://vmware.com/info?id=152. So I googled and found that I have to enable Intel VT-x. But I found out that my processor doesn't support Intel® Virtualization Technology (VT-x). So am I doomed and can I never run any virtual OS on my laptop? Or can I run 32-bit OSes?

  Read the article

• Experience with Intel X25-M 160GB and Oracle

  - by derobert

  We're considering building an Oracle database with 12 Intel X25-M G2 160GB drives in software RAID10. It'd be running Linux. Database gets some very heavy write activity during the early morning data load, other than that it is mostly read-only (and the read load is fairly minimal). We're currently running on 11 150GB Velociraptors (also Linux software RAID10), and are hoping the X25-M will speed up the data load. We currently have redo on different disks than the rest of the data. I'm wondering a few things: Any experience with using X25-M drives for databases? The X25-E are unfortunately beyond our budget. Would it hurt to separate redo off to some magnetic (non-SSD) drives, say 2 (raid1) or 4 (raid10) Seagate Constellations?

  Read the article

• Asus x551c windows 7 Intel HD Graphics driver

  - by user3609459

  I did install Windows 7 64 bit on my ex. Windows 8 pro Asus x551c "Ultrabook". The CD with the drivers isn't useable since its a windows 8 only DVD-Rom. I got the Wi-Fi and other stuff running and already tryed 3 of the Intel-HD Graphic drivers for win7 64Bit i found with google. No one was compatible with my pc. Any suggestions how to get this running? I hate windows 8 and dont want to get forced to use it.

  Read the article

• What's going on with my wireless?

  - by Mark Scott

  The WiFi on my Acer laptop (it's a 3810TZ, with Intel Corporation Centrino Wireless-N 1000) works flawlessly on Ubuntu 11.04. On 11.10, it's continually up and down, and it fills the system log with messages such as those below. What is going on? It seems to be unable to decide which regulatory domain it's in. Despite the system configuration being quite clearly set to UK it persists in configuring itself as though it was opeating in Taiwan! Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: WPA: 4-Way Handshake failed - pre-shared key may be incorrect Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: CTRL-EVENT-DISCONNECTED bssid=00:50:7f:72:bf:b0 reason=15 Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=3 Nov 22 15:34:37 MES3810 kernel: [18239.240355] cfg80211: All devices are disconnected, going to restore regulatory settings Nov 22 15:34:37 MES3810 kernel: [18239.240362] cfg80211: Restoring regulatory settings Nov 22 15:34:37 MES3810 kernel: [18239.240368] cfg80211: Calling CRDA to update world regulatory domain Nov 22 15:34:37 MES3810 kernel: [18239.240408] wlan0: deauthenticating from 00:50:7f:72:bf:b0 by local choice (reason=3) Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: 4-way handshake - disconnected Nov 22 15:34:37 MES3810 kernel: [18239.246556] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Nov 22 15:34:37 MES3810 kernel: [18239.246563] cfg80211: World regulatory domain updated: Nov 22 15:34:37 MES3810 kernel: [18239.246567] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Nov 22 15:34:37 MES3810 kernel: [18239.246572] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.246577] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.246582] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.246587] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.246592] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: disconnected - scanning Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: Trying to authenticate with 00:50:7f:72:bf:b0 (SSID='PoplarHouse' freq=2412 MHz) Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: scanning - authenticating Nov 22 15:34:37 MES3810 kernel: [18239.509877] wlan0: authenticate with 00:50:7f:72:bf:b0 (try 1) Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: Trying to associate with 00:50:7f:72:bf:b0 (SSID='PoplarHouse' freq=2412 MHz) Nov 22 15:34:37 MES3810 kernel: [18239.512276] wlan0: authenticated Nov 22 15:34:37 MES3810 kernel: [18239.512615] wlan0: associate with 00:50:7f:72:bf:b0 (try 1) Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: authenticating - associating Nov 22 15:34:37 MES3810 kernel: [18239.516508] wlan0: RX ReassocResp from 00:50:7f:72:bf:b0 (capab=0x431 status=0 aid=1) Nov 22 15:34:37 MES3810 kernel: [18239.516514] wlan0: associated Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: Associated with 00:50:7f:72:bf:b0 Nov 22 15:34:37 MES3810 kernel: [18239.529097] cfg80211: Calling CRDA for country: TW Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: associating - associated Nov 22 15:34:37 MES3810 kernel: [18239.535680] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535688] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535692] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535697] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535702] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535707] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535711] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535716] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535720] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535725] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535730] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535735] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535739] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535744] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535748] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535753] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535757] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535763] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535767] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535772] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535777] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535782] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535786] cfg80211: Disabling freq 2467 MHz Nov 22 15:34:37 MES3810 kernel: [18239.535789] cfg80211: Disabling freq 2472 MHz Nov 22 15:34:37 MES3810 kernel: [18239.535794] cfg80211: Regulatory domain changed to country: TW Nov 22 15:34:37 MES3810 kernel: [18239.535797] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Nov 22 15:34:37 MES3810 kernel: [18239.535802] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535807] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535812] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Nov 22 15:34:38 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: associated - 4-way handshake Any ideas?

  Read the article

• How to set up linux watchdog daemon with Intel 6300esb

  - by ACiD GRiM

  I've been searching for this on Google for sometime now and I have yet to find proper documentation on how to connect the kernel driver for my 6300esb watchdog timer to /dev/watchdog and ensure that watchdog daemon is keeping it alive. I am using RHEL compatible Scientific Linux 6.3 in a KVM virtual machine by the way Below is everything I've tried so far: dmesg|grep 6300 i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 i6300ESB timer: initialized (0xffffc900008b8000). heartbeat=30 sec (nowayout=0) | ll /dev/watchdog crw-rw----. 1 root root 10, 130 Sep 22 22:25 /dev/watchdog | /etc/watchdog.conf #ping = 172.31.14.1 #ping = 172.26.1.255 #interface = eth0 file = /var/log/messages #change = 1407 # Uncomment to enable test. Setting one of these values to '0' disables it. # These values will hopefully never reboot your machine during normal use # (if your machine is really hung, the loadavg will go much higher than 25) max-load-1 = 24 max-load-5 = 18 max-load-15 = 12 # Note that this is the number of pages! # To get the real size, check how large the pagesize is on your machine. #min-memory = 1 #repair-binary = /usr/sbin/repair #test-binary = #test-timeout = watchdog-device = /dev/watchdog # Defaults compiled into the binary #temperature-device = #max-temperature = 120 # Defaults compiled into the binary #admin = root interval = 10 #logtick = 1 # This greatly decreases the chance that watchdog won't be scheduled before # your machine is really loaded realtime = yes priority = 1 # Check if syslogd is still running by enabling the following line #pidfile = /var/run/syslogd.pid Now maybe I'm not testing it correctly, but I would expecting that stopping the watchdog service would cause the /dev/watchdog to time out after 30 seconds and I should see the host reboot, however this does not happen. Also, here is my config for the KVM vm <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit sl6template or other application using the libvirt API. --> <domain type='kvm'> <name>sl6template</name> <uuid>960d0ac2-2e6a-5efa-87a3-6bb779e15b6a</uuid> <memory unit='KiB'>262144</memory> <currentMemory unit='KiB'>262144</currentMemory> <vcpu placement='static'>1</vcpu> <os> <type arch='x86_64' machine='rhel6.3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>Westmere</model> <vendor>Intel</vendor> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='ds'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='vme'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='rdtscp'/> <feature policy='require' name='ht'/> <feature policy='require' name='dca'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='pdpe1gb'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='pclmuldq'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> <feature policy='require' name='aes'/> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/mnt/data/vms/sl6template.img'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:44:57:f6'/> <source bridge='br0.2'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <interface type='bridge'> <mac address='52:54:00:88:0f:42'/> <source bridge='br1'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <watchdog model='i6300esb' action='reset'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </watchdog> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain> Any help is appreciated as the most I've found are patches to kvm and general softdog documentation or IPMI watchdog answers.

  Read the article

• Intel 1.83 Mac Mini upgraded to 1.5 gig for Snow Leopard

  - by Paula

  Even though I've upgraded countless video cards, RAM, harddrives, motherboards in PCs... this will be my first mac mini RAM upgrade. I've watched the classic "putty knife" video. (Absurd method... but I guess it's what I'm stuck with.) I have a 1.83 Intel-based Mac Mini from 2007-2008, with 1 gig of RAM. (Two 512 sticks) Can I install 1 gig + 512 ? (Or do I have to throw away my existing sticks and buy two 1 gig sticks?) This old machine is rarely used... so I want to spend the absolute minimum on this RAM upgrade. We ONLY use it to run xCode... nothing more. But wanted to increase the RAM so we can install Snow Leopard. I have no idea how many pins the memory has. I printed out over FORTY pages of specs about this machine from "About this Mac"... but didn't find what I needed. Does this sound right: DDR2 SDRAM (but no mention of SO-DIMM) 667MHZ (but don't know if I can use faster also) Pin count: Unknown Computer model number: Unknown (But I "think" it's an MB138/A) PC2 RAM (unknown... not mentioned) 5300 (unknown... not mentioned) Mfg date: (unknown... not mentioned) Number of slots: (unknown... not mentioned) Laptop or desktop RAM: (unknown... not mentioned)

  Read the article

• Intel D2500HN Atom D2500 Doesn't turn on

  - by David W

  I recently bought parts from Amazon to build an embedded PC, and have assembled everything. I have: Intel D2500HN Mini-ITX Motherboard Mini-Box Pico-PSU 80 M350 Universal Min-ITX Enclosure 2GB DDR3 Memory Kinamax AD-LCD12 LCD Monitors 12V 6A 72W AC Adapter Power Supply The motherboard gets a light (on the motherboard, not on the Pico-PSU) when I plug it into the power adapter. Furthermore, I see the power switch light come on when I press the power button. However, the display doesn't turn on, and it doesn't seem that the PC is actually turned on. Since I'm seeing these lights, I know that the motherboard is getting power. Furthermore, the display VGA port is embedded into the motherboard, so that's not the issue. I'm just trying to figure out what COULD be the issue aside from a faulty motherboard. I have a diagram of the D2500HN motherboard which labels everything, and have ensured that the power LED as well as the On/Off cables are plugged into the right spots, although to be sure I've tried flipping these two cables around, and also plugging 1 cable into the other cable's spot & vice-versa. Is there anything else you folks think I may be missing, or anything else I can do to try to troubleshoot this issue before sending the motherboard back?

  Read the article

• Problems compiling coreutils-8.5 on Solaris 5.10 on Intel platform

  - by PP

  I am having trouble compiling coreutils-8.5 on Solaris 5.10 on the Intel platform using cc. Firstly I had the following error during ./configure: checking whether <wchar.h> uses 'inline' correctly... no configure: error: <wchar.h> cannot be used with this compiler (/tool/sunstudio12.1/bin/cc -xc99=all -g -D_REENTRANT). This seemed similar to the problem in this question. The solution was to edit configure and replace the reference of -xc99=all to -xc99=all,no_lib. This permitted the configure to complete. Then I ran /usr/sfw/bin/gmake and it progressed until I received the following message: Making all in src gmake[2]: Entering directory `/home/peterp/src/coreutils-8.5/src' gmake all-am gmake[3]: Entering directory `/home/peterp/src/coreutils-8.5/src' CCLD chroot Undefined first referenced symbol in file eaccess ../lib/libcoreutils.a(euidaccess.o) ld: fatal: Symbol referencing errors. No output written to chroot What could cause this problem? PS I was only compiling coreutils because I wanted colour ls.

  Read the article

• Déclin des ventes de processeurs Atom par Intel, l'âge d'or des netbooks est-il en train de s'acheve

  Mise à jour du 27.04.2010 par Katleen Déclin des ventes de processeurs Atom par Intel, l'âge d'or des netbooks est-il en train de s'achever ? Les spécialistes de l'analyse de marché de chez IDC pensent que le phénomène des netbooks à atteint son apogée. Des chiffres provenant d'Intel confirmeraient cette hypothèse. En effet, les ventes de processeurs Intel Atom pour appareils mobiles sont en déclin. Cette chute inverse la tendance des derniers mois où la puce représentait un large pourcentage des exports de processeurs mobiles. Intel envoie en effet la majorité de ses processeurs Atom à des fabriquants de Netbooks, ces ordinateurs portables miniatures à prix réduit.

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >