Search Results

Search found 4063 results on 163 pages for 'intel'.

Page 23/163 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Laptop screen not detected but ubuntu working on other monitor

  - by Aymane El Baamri

  I have a laptop with with intel celeron inside 64 bit, the 64 bit amd ubuntu 11.10 is working on the laptop, just it wont detect the laptop screen but the same live usb worked on amd 64 pc, When i connected the desktop computer monitor to the laptop it worked perfectly with 1920x1080 screen, battery, WIFI. Im not sure if its cause i made the usb it with LiLo live usb creator on the desktop pc, should i remake the usb on the laptop?

  Read the article

• Dell Latitude E6420 in-built microphone not working

  - by user38845

  I'm running with Ubuntu 12.04 64bit on Dell Latitude E6420. The inbuilt microphone is not working, and is not listed on the sound settings dialog. According to lspci, the device is: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) I've also looked at alsamixer, and can see a "mic" and "dock mic" but fiddling with these and increasing to max amplification doesn't appear to change anything. Note: I've raised a certification question on the same topic here: https://answers.launchpad.net/ubuntu-certification/+question/200678

  Read the article

• Ubuntu 12.10 hangs on checking battery state

  - by Waxolunist

  I have a Thinkpad X230. After a boot it hangs with checking battery state [OK]. A second boot is most times successful. What I have seen in other posts doesn't fit to my problem, because My graphics card is Intel 3rd Gen Core processor Graphics controller (not nvidia) It happens not always I have a fresh installed 12.10 with the latest updates (no upgrade) Does anyone experience the same issues or has a solution?

  Read the article

• WIfi Problems Ubuntu 13.10

  - by user289429

  i've been searching the forums for two days now but none of the answers seems to work for me. I have an acer extensa 5630 which has an Intel WIfi 5100. But even when i am right next to my router i cannot detect the wireless network. The weird thing is, that when i create a hotspot from my mobile phone it automatically detects it and connects to it.I think i do have the correct drivers installed. Thanks

  Read the article

• Steam Repository Help?

  - by xsccmx

  Steam runs fine in Raring, not ready for Saucy for another few months, in the meantime this repo is 404ing me every time I do an "apt-get update" http://ppa.launchpad.net/ubuntu-xswat/x-updates/ubuntu raring This ppa is supposed to allow me to get the latest updates for my Intel Graphics card. I tried searching the net to no avail but does someone know the correct ppa for this? Any help is appreciated, thanks!

  Read the article

• No sound on Dell Inspiron 6400n

  - by yanski

  After a clean install of Ubuntu 12.04 on my Dell Inspiron 6400n Laptop there is no sound on any application I use apart from the log in screen ready noise. If I click on the speaker icon on the top panel then sound settings it tells me that the default playback device is S/PDIF. In alsamixer the slider is set to zero. I am sure it should be HDA intel or similar. How can I get the sound working please...?

  Read the article

• Problem connecting to certain wifi networks

  - by Romas

  I'm using lenovo u300s (it has Intel Centrino Wireless-N 1030 card), and I can connect to wireless network at home with no problem, but I can not connect to any networks at my university. I'm not sure if it's the case but most of university networks are open and you need to sign up your username as you enter browser. There is also an eudoroam network, but I can not connect to it either. Any suggestions? Yes I have the latest ubuntu version.

  Read the article

• RAID1 Hard drives with Intel Controller

  - by Dave_H

  I have an older server with 2 35GB hard drives arranged as a RAID-1 drive. I have 3 open bays, I'd like to add 2 more hard drives to the open bays and have all 4 drives configured as a RAID-1 drive that Windows sees as 1 larger drive. Is this possible? If not, the new drives are 2x as big as the old drives, is it possible to replace 1 of the old drives and rebuild then replace the second drive and rebuild and somehow expand the array to use all of the available space? The server is using an Intel hardware raid controller, the software interface is Intel Storage Console v2.12.

  Read the article

• Solid State Drive Occasionally Freezes For A Minute While OS Is "Beach Balling"

  - by Boris_yo

  Almost a month ago I bought Intel 330 128GB solid state drive, migrated my data with Intel branded limited-feature Acronis from old HDD to new SSD, optimized with Intel Toolbox and started using it. Occassionally I get close to 1 minute freezes while seeing operating system "beach balls" and animations still work, I can interact and click on something but nothing responds, nothing loads. Recently a couple of such freezes occurred in shorter amount of time in a row. I have noticed that if I stop interacting with laptop, the freeze lasts less time than if I was interacting with laptop. But the bigger problem is when freeze just does not end and computer keeps being stuck unlil it is more than half hour and I run out of patience to keep waiting and feeling I need to restart the system because I am not getting anywhere. Such freeze happened while laptop was cold booting into Windows 7. This is when freeze hang occurred and I had to restart, only later to be greeted with Windows recovery screen stating something about faiure of boot sector and asking to insert Windows repair CD. But after I restarted, Windows booted successfully and all was well. I have filmed video of freeze hang occurring in cold boot which you can see here (on video page look below for description): http://www.youtube.com/watch?v=8b7MQlcDTUs As I have mentioned in the beginning, the SSD is less than a month old but here is S.M.A.R.T statistics just in case (TRIM is enabled btw according to CrystalDiskInfo): I want to emphasize that this SSD is the only drive I have, yet it is working in RAID mode (it was enabled initially in BIOS by previous laptop's owner) on Intel Rapid Storage drivers. I am contemplating about switching to AHCI mode but want to be sure this won't cause data loss. Additionally, the stock firmware is the only firmware available currently, yet Intel does not respond to my posts in their community board. If anyone here has this SSD model or generally has experience with SSD drives, I would love to know your thoughts.

  Read the article

• Windows 8 redraw/repaint issues

  - by obuolys

  This is what happens when I scroll a window (click for full-size versions): It can happen in any application, even in Chrome. My computer's specs: ASUS p8z77-v motherboard Intel Core-i7 3770k Intel HD Graphics 4000 integrated VGA Windows 8 Pro x64 I have tried to reinstall VGA drivers, tried to install an older driver from intel.com or asus.com, but no success with resolving the issue. Currently I am using driver version 2867. How can I fix this?

  Read the article

• Triple monitor setting in Linux with USB-HDMI adapter

  - by Oscar Carballal

  I'm trying to set up a triple monitor desktop at my office using Fedora 17, but it seems impossible, let me explain the setting: Laptop ASUS K53SD with 2 graphic cards, Intel and nVidia (Screen controled by Intel card) 24" Full HD monitor connected to the HDMI output (controlled by Intel card) 23" Full HD monitor connected to an USB-HDMI adapter (via framebuffer in /dev/fb2, apparently) VGA output (not used) controlled by nVidia card First of all, the USB-HDMI adapter works perfectly, it gives me a green screen (which means the communication is OK) and I can make it work if I set up a single monitor setting via framebuffer in Xorg. Here I leave the page where I got the instructions: http://plugable.com/2011/12/23/usb-graphics-and-linux Now I'm trying to set up the the two main monitors (laptop and 24") with the intel driver and the 23" with the framebuffer, but the most succesful configuration I get is the two main monitors working and the third disconnected. Do you have any idea what can I do to make this work? Here I leave my xRandr output and my Xorg conf: -> xrandr Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA2 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) 1920x1080_60.00 60.0 The Xorg file: # Xorg configuration file for using a tri-head display Section "ServerLayout" Identifier "Layout0" Screen 0 "HDMI" 0 0 Screen 1 "USB" RightOf "HDMI" Option "Xinerama" "on" EndSection ########### MONITORS ################ Section "Monitor" Identifier "USB1" VendorName "Unknown" ModelName "Acer 24as" Option "DPMS" EndSection Section "Monitor" Identifier "HDMI1" VendorName "Unknown" ModelName "Acer 23SH" Option "DPMS" EndSection ########### DEVICES ################## Section "Device" Identifier "Device 0" Driver "intel" BoardName "GeForce" BusID "PCI:0:02:0" Screen 0 EndSection Section "Device" Identifier "USB Device 0" driver "fbdev" Option "fbdev" "/dev/fb2" Option "ShadowFB" "off" EndSection ############## SCREENS ###################### Section "Screen" Identifier "HDMI" Device "Device 0" Monitor "HDMI1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "USB" Device "USB Device 0" Monitor "USB1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Pentium D & Intel Core 2 Duo

  - by Paul

  What's the difference between Pentium D and Intel Core 2 Duo?

  Read the article

• problem with intel 82865 motherboard graphic driver in windows 7

  - by Sanjay Kumar Yadav

  I have cpu with Pentium 4 3GHz processor. My motherboard is Intel 82865. I have installed the graphic driver for intel 82865 by using the graphic driver of Windows XP and changing the program's compatibility to Windows XP SP2. I got many thing ok with that. For example many resolutions and I can also play GTA. But what I want to know is why I cant view Aero and transparency effect in windows 7. It says contact the manufacturer for compbatible WDDM graphic driver.

  Read the article

• Intel RAID0 on Windows 8 not Displaying Correct Media Type

  - by kobaltz

  I have my primary C Drive which consists of 2 Intel 120GB SSD Drives in a RAID0. I have a clean install of Windows 8 Pro, latest MEI software, latest RST software, latest Intel Toolbox. Prior to this I had installed Windows 8 Pro as an upgrade. When I went into the Optimize Drives while in the Upgrade installation, it showed the Media Types as Solid State Drives. However, now since I am in a brand new install, it is showing the Media Type as Hard Disk Drive. I am worried about this because of the trim not working properly. Before when in the upgrade, it showed SSD as the media type and the Optimize option would perform a manual trim. Unfortunately, my search credentials on Google are so common to many other things (ie Raid0, SSD, Windows 8, Media Type) that all I am finding are useless topics. Before, (found on random site) it showed the Media Type as below

  Read the article

• Windows 8 freezes on startup when intel VT-d is enabled

  - by John Nevermore

  I don't know what to make of this situation: Windows 8 freezes after about 3 seconds after booting to the log in screen. The only way i have been able to avoid the freeze, is if i set VT-d disabled VT-d enabled, but Nvidia drivers uninstalled (running on integrated graphics) VT-d enabled, Nvidia drivers installed, Hyper-V feature enabled My goal is to get Windows 8 running with VMWare (ie. Hyper-V has to stay disabled), VT-d and the latest NVidia drivers. Specs: 32 GB of ram Intel Core i7-2760QM NVidia Quadro 1000M Intel 520 SSD 480GB Maybe somebody has experience with this kind of a situation ?

  Read the article

• Where can i get the mother board cd's

  - by Velmrugan

  Hi, Can you please tell me where can i get the mother board softwares for my intel celeron processor. I need Audio driver, Graphics & windows installer for my Intel celeron processor. Where can i download all these softwares, freely. I searched in Intel homepage but i cant find what and all to download, So please can u tell me briefly how to download these files. Regards, Velmurugan

  Read the article

• Les processeurs Clover Trail seront compatibles avec Linux et Android, un porte-parole d'Intel le confirme dans un email

  Les processeurs Clover Trail seront finalement compatibles Linux et Android Un porte-parole d'Intel le confirme dans un email Clover Trail est la lignée de processeurs qui représente la nouvelle génération d'Intel Atom. L'entreprise avait annoncé dans la récente Intel Developer Conference que ces processeurs seraient exclusifs à Windows 8. [IMG]http://idelways.developpez.com/news/images/Intel-Logo.jpg[/IMG] Mais dans un email envoyé par le porte-parole d'Intel Kathryn Gill, l'entreprise affirme avoir changé de stratégie avec « des plans pour une autre version de cette plateforme [Trail Cover] pour Linux et Android ; cependant, nous ne commentons pas pour l...

  Read the article

• How to install Network Adapter Drivers for Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20) Ubuntu 12.04

  - by Jessica Burnett

  How can I install drivers for 64-bit Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20) for Ubuntu 12.04. I dual boot Windows7/Ubuntu 12.04 drivers work for 64-bit Windows 7. lspic -nn: 00:00.0 Host bridge [0600]: Intel Corporation Ivy Bridge DRAM Controller [8086:0154] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Ivy Bridge PCI Express Root Port [8086:0151] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation Panther Point USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1c.3 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 4 [8086:1e16] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0de9] (rev a1) 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 08) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2200 [8086:0891] (rev c4) 04:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30) 04:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30) 04:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30) 04:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30) sudo lshw -c network *-network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 version: 08 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list configuration: latency=0 resources: memory:d3a00000-d3a3ffff ioport:2000(size=128) *-network description: Wireless interface product: Centrino Wireless-N 2200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: c4 serial: 9c:4e:36:14:d4:7c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-23-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:45 memory:d3900000-d3901fff I also tried Manually configuring wired connection. Nether wired or wireless connects

  Read the article

• How do I connect Ubuntu to Sony Bravia LED TV via HDMI?

  - by VedVals

  My laptop connects to 46" Sony Bravia LED TV using HDMI cable in Windows without any problem. However, it just doesn't work with Ubuntu 12.04. It always says No Signal. Problem somewhat persists after upgrading to 13.04. Bravia detects my laptop as a connection now but I am unable to display anything. What drivers/applications should I install to connect via HDMI? Output of sudo lspci -nn : 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 525M] [10de:0df5] (rev ff) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)

  Read the article

• Unable to configure/setup 5.1 audio with 12.04

  - by Vipin Vinayan

  I am kinda new to Ubuntu as well. I have been having this issue with audio for quite sometime now. Initially, when I installed version 11.10 (I guess), I was able to use my 5.1 speakers without any issues. If my memory serves me right, it was after an update that the 5.1 audio stopped working and the video resolution would not get saved. I temporarily fixed the resolution issue by creating a start-up shell script that would update the resolution and load it. But the issue with audio has been going on for quite sometime now. Even though I have option for 5.1, only two speakers seem to be working. I thought an upgrade should fix the issue and so upgraded the OS to version 12.04. I also tried uninstalling alsa and pulse audio, reinstalling them, changing the /etc/pulse/daemon.conf channels from 2 to 6. I have also tried installing pavucontrol but nothing seems to have worked and the issue still persists. Is there anything else you could suggest? The lspci log on my computer is as follows 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Would really appreciate a response that will assist me in resolving my issue. Thanks in advance Vipin

  Read the article

• No Sound in 12.04 on Acer TimelineX 3830TG

  - by Fawkes5

  When i first installed ubuntu 12.04 everything worked fine. All of a sudden my sound has stopped working!! This has happened before [like 2 days ago], however the next day it started working again. That may happen again...[I've already rebooted 5 times] My Sound Card is a HDA intel PCH My Sound Chip is Intel CougarPoint HDMI My machine is an Acer TimelineX 3830TG, heres my lcpci output 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) I'm running a dual boot with Windows 7, sound always works there. I've tried loading earlier kernels [3.2.0 ] but that hasn't helped. I've tried playing with alsamixer, unmuting and raising volume, doesn't work I've tried playing with pauvcontrol, doesnt work. Althought, strangely, when i play a song, under output i can see a bar moving implying that something is working, just the sound isn't getting through my speakers. Thus it might be a hardware problem. I've tried unistalling and reinstalling pulsaudio annd alsamixer, doesn't work [maybe made it worse...]. I've heard reverting back to kernel 3.0... works, but i'm reluctant to try that[i dont know much about kernels]. Thank you. Please tell me what other information you need. EDIT: My audio has started working again after another reboot. However this time im not connected to my external audio on startup. I will see if this is the issue next time i'm at home Edit: Connecting to external audio is not the problem.

  Read the article

• What's wrong with my wireless?

  - by dazzle

  I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

  Read the article

• My ubuntu runs in slow motion on ubuntu 13.04 asus 1015cx

  - by thj

  My specs: my Asus EeePC 1015CX certified by ubuntu 12.04 lts asus 1015 cx with gma 3600 graphic card intel atom dual core ubuntu 13.04 My problem: I need to use ubuntu 13.04, not 12.04. ubuntu 13.04 runs in slow motion on default unity desktop, is it graphic card problem? when i clicked file, runs in very slow animation on unity. windows comes up in very slow motion I can't even use ubuntu 13.04 because so slow. what's minimal requirement of ubuntu 13.04 or unity desktop? why is it so slow? what kind of processes should i take to fix it? I tried by myself but no good result. Need some help anyway. Any ideas ? maybe i should change hardware lol? my Asus EeePC 1015CX certified by ubuntu 12.04 lts !

  Read the article

• Downloads killing internet on my home network

  - by Travis

  I am currently having a problem with my wireless. Whenever I try to download anything it kills the internet for every other application(tabs within the same browser, browsers on other computers on the same network) except the process doing the download. This occurs with everything from downloading updates to iso's. I am not using a torrent. It happens when downloading upgrades, browser downloads, or anything else. This problem does not occur when I use Windows 7 on the same computer and it stops killing the internet for other computers if I turn the download/Ubuntu off. I am using an ASUS G74SX laptop running Ubuntu 12.10 with Gnome 3.6. My wireless card is an Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67) Thanks!

  Read the article

• Unity GUI pauses/freezes for less than a few seconds

  - by Ahmad Nassri

  I've just got my new Lenovo ThinkPad X220 with Intel HD graphics (I'm not sure what the chip is) and I've installed Natty. Everything works great out of the box, except there are short pauses/freezes in the UI that randomly occur, they last less than 2 seconds, actions are still taking place in the background (like typing) when the UI un-freezes I can see the characters I've typed, the app I've clicked, loaded . I can confirm that this is only happening with the new Natty 3D interface, I've tried 2D and the classic interface and there were no issues. Googling this topic seems challenging as I can't relate the problem in keywords. And I keep getting results relating to full GUI freeze which I don't have. This is troubling since I have Natty 3D running on older machines without any issues . I wonder if anybody else have experienced this or came across this issue before. Thanks.

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >