Search Results

Search found 1733 results on 70 pages for 'isc dhcp'.

Page 27/70 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• route lan traffic through wirless mifi

  - by Randall Blake

  I have a Windows 7 laptop accessing the internet through Verizon wireless MIFI configured as 192.168.1.1. It supports only 5 wireless connections, so I don't want to use up connections unnecessarily. That laptop has an ethernet nic which I have given a static IP of 192.168.0.5. Everything else on the 192.168.0.0 network acquires an address via DHCP from a DLink router whose address is 192.168.0.1. Also on that network are a printer, some network cameras, and a linux pc. The linux pc does not have a wireless card (and I don't want to buy one). The linux pc is located at 192.168.0.122. I can ping the linux pc from the windows pc. But I cannot access the internet from the linux pc. I can ping everything on the 192.168.0.0 network EXCEPT the ethernet card in the Windows PC. It seems as though my DLink router will not route requests to the 192.168.0.5 nic on the windows pc. My windows pc has a default route pointing to the 192.168.1.0 network. It also has a route telling it to route all traffic destined for the 192.168.0.0 network through the 192.168.0.5 interface. I have tried adding a default route to the linux pc to "gateway" 192.168.0.5, but that does not work. I have also tried adding a default route to the linux pc to the gateway 192.168.0.1 (the DLink router) but that will not give me internet access either (over the 192.168.1.0 network). I tried these two different routes at different times - I did not set them both at the same time. I suppose this is a simple problem to solve, but I cannot seem to solve it. How can I give internet access over the 192.168.1.1 MIFI to my linux pc on 192.168.0.122? Thanks EDIT: Additional Info Internet | | MIFI (192.168.1.1) (wireless) | | (192.168.1.3) (wireless) Windows 7 PC Dlink Router (192.168.0.1) ------------ (192.168.0.5) (wired) | | |linux pc (192.168.0.122) (wired) | |printer (192.168.0.100) (wireless) | |network cameras, etc (192.168.0.103) (wireless) Only the windows pc is multi-homed with a wireless nic that connects to the MIFI wirelessly, and an ethernet nic with a wired connection to the DLink router. (The DLink permits both wired and wireless connections.) I don't want to use Windows internet connection sharing because I believe it will set up the ethernet nic as a gateway on 192.168.0.1 and a DHCP server. I already have the Dlink performing that role and I don't want to change that if I do not have to. (The Dlink permits me to make DHCP reservations and I really like that feature. I don't want to lose it.)

  Read the article

• Share laptop Wi-Fi with router set up as access point via ethernet cables

  - by obie

  I have an ADSL modem which serves as a wireless router. There's a laptop connected to it through cable. On the other room I have a laptop which is connected through the router wirelessly. Since I have other appliances that need to get connected but are not Wi-Fi capable I have another Wi-Fi router. How can I share the second laptop's Wi-Fi with the second router so that the router can then serve as an access point to give internet to my other appliances through ethernet cables? I want something like this: INTERNETMODEM (WIFI)LAPTOP 1 (WIFI)LAPTOP 2 (WIFI)Router 2 (ETHERNET)DREAMBOX & WDTV What I've tried so far is opened the admin interface of router 2 then set static IP 192.168.100.13 and disabled the DHCP. The DHCP of the main router starts with 192.168.100.1 then I hooked up router 2 with the laptop 2 through Cat5 cable but for some reason it's not working.

  Read the article

• Cablemodem frequent connection loss

  - by LVDave

  I have a Linksys BEFCMU10 cablemodem and a WRT54GL router with Tomato 1.27 firmware on Cox cable. My question is this: I get what seems to be random disconnects from the internet, where the cable modem lights are still normal, but I can connect nowhere, either via a url or an ip address. At the same time these disconnects are happening, I can go to the router's Tomato management webpage, and release/renew my external IP address from Cox's DHCP server. I've had Cox look at the signal levels on the cable modem, and they say they look fine. What brings back the modem, for sometimes as long as 17 days, is several power-cycles of the modem. I don't understand the underlying cable modem technology too well, but I do know that if I'm able to release/renew the DHCP-provided WAN address, I'd expect that the cable modem was working ok... Anybody have any ideas??

  Read the article

• Unable to resolve hostname on a proxy network

  - by ali

  I can browse sites using firefox configured with proxy 172.1.6.0.6:3128 resolv.conf domain pudhcp.ac.in search pudhcp.ac.in nameserver 172.16.0.7 I checked with Windows and I found the same DNS server settings 127.0.0.1 bt 127.0.1.1 bt Above is the hosts file I modified the top line from localhost to bt still not working bt is the hostname Still I can't ping to google.com - it is showing unable to resolv hostname I tried all solutions,I guess proxy is used even for DNS resolution root@bt:~# dhclient There is already a pid file /var/run/dhclient.pid with pid 7157 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/eth1/5c:ac:4c:b1:0c:7c Sending on LPF/eth1/5c:ac:4c:b1:0c:7c Listening on LPF/eth0/60:eb:69:18:4d:3d Sending on LPF/eth0/60:eb:69:18:4d:3d Sending on Socket/fallback DHCPREQUEST of 172.16.6.87 on eth0 to 255.255.255.255 port 67 DHCPACK of 172.16.6.87 from 172.16.6.1 bound to 172.16.6.87 -- renewal in 79432 seconds.

  Read the article

• how to pass traffic for port 80 not through openvpn?

  - by moti

  Is there a way to configure OpenVPN clients to route traffic for HTTP port 80 and HTTPS port 443 directly (i.e. not through the VPN), but through the regular default gateway the clients have. All other traffic should go through the VPN. My client is running OpenVPN on Windows and my current configuration looks like this: client dev tun proto tcp remote my-server-2 1194 resolv-retry infinite nobind persist-key persist-tun ca ../keys/ca.crt cert ../keys/client1.crt key ../keys/client1.key ns-cert-type server verb 3 route-metric 1 show-net-up dhcp-renew dhcp-release route-delay 0 120 hand-window 180 management localhost 13010 management-hold management-query-passwords management-forget-disconnect management-signal auth-user-pass

  Read the article

• FreeBSD Can't recognize my network

  - by Mascarpone

  I'm trying to install FreeBSD on VirtualBox in my Ubuntu 11.10 . When I try to download the packages via FTP, the systems fails to correctly configure the DHCP. There are two possible behaviors, randomly picked every time I retry: The DHCP is almost correctly configured, except my host is .fastwebnet.it rather than the real namehost.fastwebnet.it . Whenever I try to add something before the . , the system edit the field and revert it to .fastwebnet.it Only the netmask is configured, everything else is blank. I can't edit the fields. I tried both with NAT and Bridged adapter in my VirtualBox settings.

  Read the article

• Using OpenVPN, yet netflix.com blocks access

  - by user837848

  I have set up an OpenVPN server on a VPS in the USA and configured it to route all clients traffic through it. Everything seems to work fine regarding the VPN connection in gerneral. All ip lookup sites show me the us server's ip address and even hulu.com works(it won't work if you are not in the usa). But for some reason netflix.com says "Sorry, Netflix is not available in your country yet.". So I thought that netflix probably uses some more sophisticated ways to determine your location beyond just your ip address. But I could not find a way to get it to work until I dropped the idea of using a VPN and instead connected to the server via a simple socks tunnel with ssh by running: ssh -D 9999 user@serverip All I had to do was changing the key network.proxy.socks_remote_dns in Firefox from false to true to prevent DNS leaks and setting up the socks proxy. Then I could finally watch netflix.com. As a result I concluded that there is nothing in the browser(or something like system timezone) that tells netflix the location, so it has to have something to do with the OpenVPN config. After that I used tcpdump to log all the traffic on the server's network interface venet0 (OpenVZ VPS), visited netflix.com on the client while first connected to the VPN and then connected via socks tunnel and afterwards compared both outputs. The only thing that caught my eye was that while using the socks tunnel the server mainly used ipv6 to connect to netflix whereas it only used ipv4 when the client was connected to the OpenVPN server. But I don't get how that could make such a difference. So what am I missing? Is there a way to configure OpenVPN to also use ipv6 to connect to a website although there is only an ipv4 connection between the VPS and the client? Here is the server.conf of the OpenVPN server (OpenVZ VPS) local serverip port 443 proto tcp dev tun ca ./easy-rsa2/keys/ca.crt cert ./easy-rsa2/keys/vps1.crt key ./easy-rsa2/keys/vps1.key # This file should be kept secret dh ./easy-rsa2/keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" client-to-client keepalive 10 120 tls-auth ta.key 0 # This file is secret cipher AES-256-CBC comp-lzo max-clients 4 user nobody group nogroup persist-key persist-tun status openvpn-status.log log-append openvpn.log verb 3 iptables forwarding iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o venet0 -j SNAT --to-source serverip (enabled ipv4 forwarding) I have tried everything always on a Win7 and a Debian client with only ipv4 connections and always made sure that they use the correct DNS server (tested with ipleak.net and tcpdump / wireshark). client.conf: client dev tun proto tcp remote serverip 443 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 cipher AES-256-CBC comb-lzo verb 3

  Read the article

• Multiple IPs on Juniper SRX100 Untrust Port

  - by Will

  I am having trouble getting multiple IP addresses on the untrust port. I have tried a few different methods, but can't seem to get it to work. Does anyone have a good tutorial that is not easily found or if possible can type up the steps? I don't mind trying to do it through ssh, but would prefer web interface. Thank you ++++++++++++ Feb 1 fe-0/0/0 { unit 0 { family inet { dhcp { update-server; } } } } routing-options { static { route 0.0.0.0/0 next-hop 96.11.173.81; } } Right now it's setup to receive settings from 'cable modem' through dhcp, but I think it's only getting one IP.

  Read the article

• Net Screen manager setup

  - by Codezy

  I'm having an issue with our NSMExpress box. I'm trying to manage all our devices, range from ns5gt to ssg320m, and some of those devices have addresses assigned by dhcp from the ISP (like pppoe or dsl). The addresses are actually static but we have the register the MAC address in order to get this address. I can actually add the device in NSM except the IP that's on the untrust side isn't imported in as it's dynamic. Because of this I cannot change many options that pertian to the untrust interface as there is no IP. I've talked to JTAC on this and they didn't know if there was a way to do this or not but then they stated that Tim Hortons does this so I'm confused on how to get this working. Maybe i'm just missing something as I imagine that other people must be doing this as well. Any assistance is appreciated! Furthermore when I import a device this is the message I get: Warnings: Interface ethernet0/0 is a pppoe/dhcp/pppoa client and its ip is NOT IMPORTED because it may be dynamic.

  Read the article

• OpenVPN Push DNS Not Working Correctly On Windows

  - by woodsbw

  I currently have OpenVPN server setup on an Ubuntu machine, as well as DNSMasq. I am wanting to push DNS to the client (road warrior setup.) I had the push "dhcp-option DNS x.x.x.x" where x.x.x.x was an open OpenDNS server, for testing, and everything was working when I connected from my Windows client But now that I have DNSMasq setup, and I changed the "dhcp-option DNS x.x.x.x" to the DNSMasq server, but when they client connects it still receives the old, OpenDNS DNS server IP. I'm at a bit of a loss here, I have tried flushing DNS on the client, rebooting the server, and I even grep'd the entire server to see if the OpenDNS IP was in some other config I was missing...it wasn't. One other note, when connect to the VPN and explicitly run nslookup against against the DNSMasq IP, the addresses resolve correctly, so it isn't a DNSMasq issue.

  Read the article

• internal DNS server limiting the speed as 55kb/sec ?

  - by kartook

  Hi all , Thanks in advance to everyone . Here is my Question . 1 .We have LAN internal DNS server ( 192.168.205.200 ) 2. DNS server Running on my ADDITIONAL DOMAIN CONTROLLER 3. Tested with Nslookup IPADDRESS and hostname resolving without any error . 4 .DHCP server Running on 3750 Switch ( Checked with CISCO Confirmed the configuration ) .DNS name server pointed to 192.168.205.200 . ISSUE : 1.Host getting ipaddress and DNS from DHCP server .Maximum file transfer Bandwidth 55KB/sec . 2. Assigned Static DNS on Host as ISP DNSServer Address, host getting full bandwidth whihc is 1mb/sec Thanks Kartook

  Read the article

• Can't get bridged networking to work between linux guest virtual machine and Mac host

  - by tgoneil

  I'm trying to establish bridged networking from linux mint vsn 12 in virtualbox to a Mac Lion host. Mac config: Network setting: en3 configured by DHCP Sharing setting: Internet Sharing selected, Share connection from en3 to computers using en3 Virtualbox Linux setting: Network setting: Bridged Adapter, Name: en3 I can ping from host (192.168.2.1) to guest (192.168.2.2) and guest to host, but I Cannot ping from the Linux guest to the outside world. Connection in host is up, because I can ping from the Mac host to the outside world. Something else that's seems weird to me, in the Mac Network setting, the IP Address generated by DHCP says 169.254.243.185. What the heck is that?? When I open a terminal up in the Mac, however, ifconfig shows its en3 inet address as 192.168.2.1.

  Read the article

• Lan, vpn on Amazon EC2, how to?

  The problem is as follows: I have 2 windows2003 server instances running on the cloud. 1) How can I create a local area network from these 2 instances? 2) Assuming that I want to create a VPN network from these 2 instances, how do I do that? (I'm not very good in networking, therefor the above problem description might be incomplete or not very clear.) A detailed answer or clarification would be praised and appreciated! What I tried: 1) Setting up OpenVPN, but I got lost in the process. 2) Creating a VPN from windows2003 server in the following manner: on instance a): set up a dhcp server; set up an "accept income vpn" connection; with the followin tcp ip settings: obtain an ip from the dhcp server; on instance b): created a new vpn connection, tried to connect to intance A, using the instance A static IP but error 806 was thrown, something relate to a GRE protocol.

  Read the article

• Separating two networks

  - by Farhan Ali

  I have two routers, R1 and R2. R1 (a stock linksys router running dd-wrt) is connected to internet and is serving internet to a network of 5 devices/PCs running a DHCP server, with a network of 192.168.1.0/24. R1 also serves internet services to R2. R2 (a ubuntu server 12.04) gets internet from R1. R2 has 3 PCs attached to it, runs a DHCP server with a network of 172.22.22.0/24. My requirement is that the clients on both sides should not talk to each other at all – with the exception that R1 clients may access the R2 router through its IP of 192.168.1.x. At the moment, R2 clients are able to ping R1 clients, which is unacceptable, whereas R1 clients cannot ping R2 clients, which is OK. I believe iptables could be set up but I don't know how.

  Read the article

• Sonicwall - dual WAN ports - switch from one to another

  - by Charles

  Hi, Folks! I'm using a SonicWall NSA 240 which has two WAN ports (T1 and Comcast) and the LAN port has a cable which connects to a switch. From the switch, several cables connect to other switches. The SonicWall doesn't have DHCP enabled; one of our domain controllers running Windows Server 2003 also functions as a DHCP server. Is there a way for a user in our network to change connection from T1 to Comcast as their ISP or vice versa? In other words, if a user is connected via the T1, can he/she somehow connect via Comcast instead? Thanks, in advance, for your help! Sincerely, Charles

  Read the article

• CentOS connect to the internet

  - by Delirium tremens

  I installed CentOS, but it didn't automatically connect to the internet. Is that the normal behavior? I have Ethernet Broadband Router DI-604 and WebStar DPX2203 series Cablemodem with EMTA . What should I do to connect to the internet? Update: A cousin told me my ethernet adapter or network board will depend on my motherboard. My computer upgrade document says the motherboard is gigabyte video onboard. I heard gigabyte's network adapters are Gigabit or Realtek. In CentOS, System - Administration - Network - New - Ethernet, first, only "Other Network Board" was listed, so I selected it and clicked Next, then there wasn't Gigabit, but there was Realtek, so I selected Realtek. I heard with Net Virtua selecting dhcp the things first answered asked me to tell first answerer are automatically configured. So I tried Realtek with dhcp, but it still didn't work.

  Read the article

• Smoothwall Express interface issues

  - by Timbermar

  I have a SmoothWall Express box that is currently configured with a Green and Purple interface. Both interfaces are in the same /24 subnet (which seems odd to me). The green interface (address of .254) has a DHCP server that is pushing addresses from .1 to .100 and the purple interface (.253) is pushing addresses from .101 to .120. Every machine here is trusted, and as such is connected to the green interface via a wired connection or wireless APs. Nothing is connected at all (port is physically empty, traffic graphs show no activity) to the purple interface. However, every machine here is pulling addresses from the purple interface. So the question boils down to, how do I remove/stop my machines from pulling from the purple dhcp interface? Also, shouldn't the purple interface (if we were using it for guest Wifi or something) be on a different subnet (i.e. 192.168.100.0/24 instead of 192.168.1.0/24 with all the trusted machines)?

  Read the article

• Snow Leopard can see Windows shares in Finder but can't connect

  - by Randy Miller

  I have an iMac with the latest version of Snow Leopard on it. I have a NAS drive and a Windows machine that both show up in the Finder's 'Shared' section. However, if I click on them, Finder says "Connection Failed". Clicking on 'Connect As...' gives an error dialog that says "The server 'blah' may not exist or it is unavailable at this time." Points of interest: All machines are receiving their IP/DNS info from the router using DHCP. I have a Mac Mini on the same network that connects to the NAS drive and windows machine perfectly with no config (i.e. worked out of the box). Both Macs are on the same version of Snow Leopard. There is no password required to access the NAS share. I've never setup a WINS server on any machines and all machines are using 'workgroup' by default. I've tried putting "workgroup" in the Mac's workgroup entry and have tried leaving it blank, neither solves the problem. Here are some things I have tried: Finder-Connect To Server: smb:///share. This works, but by name does not. Terminal-mount_smbfs //@/share share. This also works by ip, but not be name, resulting in "mount_smbfs: server connection failed: No route to host". If I put the IP address of the NAS in the WINS server entry in the Mac's network setup, I can connect by name. It obviously seems to be a name resolution error, but I can't figure out why. The only thing that has changed since it used to work is that I got a new router that now gives out DHCP (all machines are dhcp clients) addresses of 192.168.x.x, but used to be 10.0.x.x. I've grep'd through everything that might have saved that old address, but can't find anything. It's also worth noting that the second Mac (the one that connects successfully) was added to the network after the router change. Please let me know if there are additional points of information needed to troubleshoot this further. Thanks, Randy

  Read the article

• How does Windows 7 DNS client work?

  - by Mark Allison

  I am using a local DHCP and DNS server on my home network on a linux machine. It is running CentOS 6.3 with dnsmasq 2.48. It's all working fine except for local DNS lookups for Windows machines only. I have a mix of Ubuntu, CentOS and Windows machines on the network, some virtual, some physical. I have a machine called boron and the domain is called localdomain If I ping boron from any linux machine, I get [root@lithium lists]# ping -c3 boron PING boron.localdomain (10.0.0.5) 56(84) bytes of data. 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=1 ttl=64 time=0.740 ms 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=2 ttl=64 time=0.478 ms 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=3 ttl=64 time=0.458 ms --- boron.localdomain ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2000ms rtt min/avg/max/mdev = 0.458/0.558/0.740/0.131 ms If I do it from my Windows 7 machine, I get: Ping request could not find host boron. Please check the name and try again. If I try ping boron.localdomain I get: Pinging boron.localdomain [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=16ms TTL=57 Reply from 67.215.65.132: bytes=32 time=188ms TTL=57 Reply from 67.215.65.132: bytes=32 time=15ms TTL=57 Reply from 67.215.65.132: bytes=32 time=14ms TTL=57 Ping statistics for 67.215.65.132: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 14ms, Maximum = 188ms, Average = 58ms which is clearly wrong. Why is it going out to the internet? Why can't my windows machine resolve the boron hostname to a FQDN? My Windows machines and linux machines get their network config from DHCP. UPDATE If I do ipconfig /all in Windows, it looks as I would expect: Windows IP Configuration Host Name . . . . . . . . . . . . : lanthanum Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : .localdomain Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : .localdomain Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 50-E5-49-38-FC-A2 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.0.0.57(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 23 August 2012 13:58:45 Lease Expires . . . . . . . . . . : 24 August 2012 07:58:48 Default Gateway . . . . . . . . . : 10.0.0.6 DHCP Server . . . . . . . . . . . : 10.0.0.6 DNS Servers . . . . . . . . . . . : 10.0.0.6 208.67.222.222 208.67.220.220 NetBIOS over Tcpip. . . . . . . . : Enabled When I do an nslookup I get: Server: carbon.localdomain Address: 10.0.0.6 *** carbon.localdomain can't find boron: Unspecified error However if I do ifconfig -a in Linux I get: [root@nitrogen ~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:0C:29:AF:EC:2A inet addr:10.0.0.7 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:187687 errors:0 dropped:0 overruns:0 frame:0 TX packets:5857 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:23910700 (22.8 MiB) TX bytes:712964 (696.2 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:329894 errors:0 dropped:0 overruns:0 frame:0 TX packets:329894 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:67153143 (64.0 MiB) TX bytes:67153143 (64.0 MiB) and nslookup: [root@nitrogen ~]# nslookup boron Server: 10.0.0.6 Address: 10.0.0.6#53 Name: boron Address: 10.0.0.5 Both machines are on the same network using the same DHCP server. UPDATE 2 I thought the issue was resolved but I am getting intermittent DNS resolving issues but only on my Windows 7 machine. All my linux boxes are fine. This is what happens when I ping and nslookup from Windows to a Windows 2008 Server: C:\Users\mark>nslookup magnesium Server: carbon.localdomain Address: 10.0.0.6 Name: magnesium.localdomain Address: 10.0.0.12 C:\Users\mark>ping magnesium Pinging magnesium.localdomain [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=267ms TTL=57 Reply from 67.215.65.132: bytes=32 time=162ms TTL=57 Reply from 67.215.65.132: bytes=32 time=510ms TTL=57 Reply from 67.215.65.132: bytes=32 time=146ms TTL=57 Ping statistics for 67.215.65.132: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 146ms, Maximum = 510ms, Average = 271ms And from Linux: [root@beryllium ~]# ping -c4 magnesium PING magnesium.localdomain (10.0.0.12) 56(84) bytes of data. 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=1 ttl=128 time=0.176 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=2 ttl=128 time=0.634 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=3 ttl=128 time=0.685 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=4 ttl=128 time=0.263 ms --- magnesium.localdomain ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3002ms rtt min/avg/max/mdev = 0.176/0.439/0.685/0.223 ms [root@beryllium ~]# nslookup magnesium Server: 10.0.0.6 Address: 10.0.0.6#53 Name: magnesium.localdomain Address: 10.0.0.12 UPDATE 3 I stopped the Windows DNS client on my Windows 7 machine with net stop dnscache and it is now working fine. It would be nice to get DNS working with the DNS client on, but I might be OK without it, what do you think?

  Read the article

• Juniper SRX1400 VPN

  - by ank

  I have been trying to set up a client VPN on a Juniper SRX1400 without much success. All documentation I found from Juniper and elsewhere does a lot of other (difficult and wonderful) things other than the simple things I want to do. We already have a VPN running on CISCO PIX hardware which we need to put to rest and we pretty much like to replicate the functionality, which is: 1) client makes a request to the outside interface of the SRX1400, 2) client gets authenticated, 3) if successful, then client is assigned all the usual DHCP stuff and becomes part of the network. What privileges this DHCP assigned network has, should be configurable of course with the usual routing/filtering methods. Am I asking for too much from the SRX for this kind of thing? Should I ditch the SRX for VPN and revert to an OpenVPN solution that I had working some time back also and was amazed at the ease of configuration, functionality and features?

  Read the article

• Can't get DHCPd to assign IPs to unknown clients

  - by Jakobud

  I'm using Webmin to admin our DHCPd server. But I'm having a hard time getting it to assign IP addresses to unknown clients. The only way I can get it to assign an IP is to make sure a host is added to DHCPd as a host so that it gets a static-lease IP assigned to it. I thought "Allow Unknown Clients" was the key, but it still isn't assigning IPs to unknown clients. I have a pool setup so that the unknown clients should get an IP between 10.20.0.200 - 10.20.0.249. Here is the config file. What am I missing here? allow unknown-clients; # Primary DHCP server config authoritative; ddns-update-style none; failover peer "dhcp-failover" { primary; address 10.20.0.30; port 647; peer address 10.20.0.25; peer port 647; max-response-delay 60; max-unacked-updates 10; load balance max seconds 3; mclt 3600; split 128; } subnet 10.20.0.0 netmask 255.255.255.0 { allow unknown-clients; option subnet-mask 255.255.255.0; option broadcast-address 10.20.0.255; option routers 10.20.0.100; option domain-name "ourdomain.com"; option domain-name-servers 192.168.10.20; default-lease-time 86400; max-lease-time 86400; option ntp-servers 192.168.10.20; option time-offset -25200; pool { allow unknown-clients; failover peer "dhcp-failover"; max-lease-time 86400; range 10.20.0.200 10.20.0.249; deny dynamic bootp clients; } host Server-myserver { option host-name "whatever.ourdomain.com"; hardware ethernet 00:89:D4:35:4F:13; fixed-address 10.20.0.23; } }

  Read the article

• Multiple interfaces to one IP address?

  - by Delan Azabani

  At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

  Read the article

• Deployment of broadband network

  - by sthustfo

  Hi all, My query is related to broadband network deployment. I have a DSL modem connection provided by my operator. Now the DSL modem has a built-in NAT and DHCP server, hence it allocates IP addresses to any client devices (laptops, PC, mobile) that connect to it. However, the DSL modem also gets a public IP address X that is provisioned by the operator. My question is Whether this IP address X provisioned by operator is an IP address that is directly on the public Internet? Is it likely (practical scenario) that my broadband operator will put in one more NAT+DHCP server and provide IP addresses to all the modems within his broadband network. In this case, the IP addresses allotted to the modem devices will not be directly on the public Internet. Thanks in advance.

  Read the article

• Squid: problem with FTP service (Windows Server)

  - by Diego

  I followed the instructions on this question and everythig works fine. I have an DHCP server that assigns "IP client" without gateway. Internet with IE or Firefox Browser works but FTP service doesn't work. In squid.conf I have put a line: acl Safe_ports port 80 21 443 389 5307 8080 3144 8282 88 8443 20443 11438 1443 8050 30021 10443 4747 4774 1384 Have I to put gateway in DHCP Server? Have you any suggestion for me? Thanks for your help!

  Read the article

• Windows 2008 Domain Controller - Backup (BDC) to Primary (PDC)

  - by Klaptrap

  I have created a new domain controller with my single domain forest. I have also made it DHCP and DNS ready - all 3 services have synchronised with the existing W2K8 domain controller. I even migrated the FSMO roles and thought everything was fine. Indeed all machines on network appear to obtain DHCP and DNS from new server and the AD is working on the new server as my internal website uses it for login authentication. I have just noticed, via BgInfo - Sys Internals - that the new server is showing as "backup" and the old as "primary" - I thought I had already achieved this. Have the FSMO roles swapped back - as I have yet to have removed the old server from AD (dcpromo). Do I need to do anything before I run dcpromo on the old server? Any thoughts appreciated....

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >