Search Results

Search found 700 results on 28 pages for 'nas'.

Page 27/28 | < Previous Page | 23 24 25 26 27 28  | Next Page >

• Windows 7 'Unidentified Network'

  - by Throdne

  So my internet was working last night before I went to bed and woke up to a computer that is showing unidentified network. I have tried multiple ways of fixing it. > route delete 0.0.0.0 > uninstalling drivers - restart - reinstall from downloaded drivers > ipconfig /release - /renew > static IP > speed & duplex from auto negotiation to 1.0gbps full duplex > and also changed my network address to no value to 1234567890ab (not in that order) nothing seems to work. I have Comcast internet and when I connect the computer to the modem it works perfectly. but when I connect it to my router again, Unidentified network. I know my router isn't faulty, because my macbook pro, server, NAS, iPhones, and iPads are still working. I have also tried moving the port on the router, still same problem. my router is a: Cisco Small Business RVS4000 motherboard: GIGABYTE GA-990FXA-UD3

  Read the article

• Windows Server 2003 (w/Exchange) move to new machine

  - by James Booker

  I have an ageing domain controller (the only one on a 10-pc network) which needs rebooting often. I have a Dell Poweredge 2850 server doing nothing, so I'd like to move the DC to that, but here's the catch - I don't have Win2k Server Std install media any more as it's been lost. I purchased "Easus Todo Backup Advanced Server" which claims to be able to recover to dissimilar metal, but it's not quite working (although I don't think it's the product's fault) I know the server and PERC RAID card are good because I installed Ubuntu on the logical drive (4 x 72GB disks RAID 5) no problems. I've booted frmo the Easus Todo backup CD (which is WinPE based) and recovered to the logical disk on the RAID (after installing driver inside the WinPE environment from a NAS drive) The problem is when I boot the server, I can get the OS selection menu, but any option results in a blank screen, with no errors. I figure this is probably because the driver wasn't installed on the old machine (which is IDE-based (i know, i know!) and doesn;t have a RAID controller) I've booted from the CD and copied the mraid35x.sys file to the c:\windows\system32\drivers folder on the recovered system, but it makes no difference. I made a boot.ini with rdisks 0-10 defined, and booting from each of these resulted in a file error (i.e. 'this isn't a real disk') - the only disk that gets any response (the blank screen) is multi(0)disk(0)rdisk(0)partition(1) which just gives me the blank black screen and no disk activity. Is there any way I can force the drvier to be installed on the source system (so i can do a full backup again), i've tried right-clicking the oemsetup.inf and clicking install, but it didn't actually do anything. I attempted to force it with the 'Add new hardware' wizard and forcing with the 'have disk' option but it still gave me no hardware to select. Also I've got an identical machine running WinXP which uses the PERC driver successfully (which was obviously done at install time) and the boot.ini settings are the same : multi(0)disk(0)rdisk(0)partition(1) Any ideas would be appreciated.

  Read the article

• Troubleshoot port forwarding. Could it be ISP blocking incoming connections?

  - by Gravy

  Had a new Axis IP camera delivered yesterday. Plugged into Cisco E2400 Wireless Router but having problems. Example topology: WAN IP: 10.10.10.10 (example) Cisco Router: 192.168.1.1 Axis Camera: 192.168.1.10:80 Port forwarding rules set up on router External Port: 999 Internal Port: 80 Protocol: TCP & UDP Device IP: 192.168.1.10:80 Enabled: True Trying to connect from within the lan to 192.168.1.1:80 from within browser - Works properly. Trying to connect from within the lan to 10:10:10:10:999 from within browser - Works properly. Trying to connect from outside the LAN (e.g. via 3g or another isp) to 10:10:10:10:999 from within browser - Doesnt work. I get the following errors from different machines / browsers: Safari could not open the page because the server stopped responding (IOS) The server at xx.xx.xx.xx is taking too long to respond. (firefox) This problem is not just for the Axis camera. I am also having similar problems connecting to my NAS drive. After using a web based port scanning tool, it appears as though port 999 is closed. Not certain why when I have set up port forwarding within the router. Any troubleshooting suggestions to help me determine whether the problem is with my Cisco settings / firewall or whether it could be my ISP blocking incoming connection requests? Many thanks

  Read the article

• Summer daylight time not changing on some active directory domain clients.

  - by Nick Gorbikoff

  We just had a summer daylight change in US. and pc's on my network are behaving strange, some of them change time and some didn't. My network: 2 locations both in Midwest, same time zone. Location 1: 120 pcs (windows xp & windows 200) , with 1 Active Direcotry Domain Controller on Windows 2003 Standard. A couple of windows 2000 servers (they up to date) the rest of the servers are Xen or Debian machines (all up to date) , Second location connected through OpenVPN link all pc's are running fine - but they are all connecting to our AD domain controller. Locaiton 2: 10 pcs, and a shared LAN NAS. Both of the routers/firewalls in both locations are pFsense boxes with ntp service running - but it's up to date. Tried all the usual suspects: I have all the latest updates installed restarted them domain controller is running fine most computers are running fine I have only one domain controller on my network also my firewall serves as ntp server (pfsense) but it's up to date. all of the linux machines are fine since they are querying firewall / router for the time. about 1/3 of my pcs are 1 hour behind. If I change them manually they just change back ( the way domain pc's are supposed to). I've tried everything but I can't think of anything else to try.

  Read the article

• How to deploy a WPF 4 Full Trust XBAP an on intranet?

  - by sparks

  I'm having trouble running a full trust WPF 4 XBAP (browser application), created with Visual Studio 2010, from my intranet. I do not get a ClickOnce elevation prompt, as described in ScottGu's post on WPF 4: Full Trust XBAP Deployment Starting in WPF 4, the ClickOnce elevation prompt is also enabled for XAML Browser Applications (XBAPs) in Intranet and Trusted Zones, making it easier to deploy full-trust XBAPs. For XBAPs that require security permissions greater than the minimum code access security (CAS) permission grantset of the Intranet and Trusted Zones, the user will be able to click 'Run' on the ClickOnce elevation prompt when they navigate to the XBAP to allow the XBAP to run with the requested permissions. Instead, I get the "Trust Not Granted" message. I'm running the application in two ways; in both cases, I get the "Trust Not Granted" message. First, I'm launching the application by double-clicking on the xbap file from my NAS on the local network. Secondly, I'm also trying to launch the application when it is hosted on a website via IIS from the same machine. Are both of these scenarios considered to be run from an "intranet?" Or does "intranet" mean some in particular here? Or am I doing something completely wrong? Of note, I am able to launch the application without problem when I simply double-click the xbap from my local computer. The xbap in question was created specifically to test the ClickOnce elevation prompt. It was created with Visual Studio 2010 as a WPF Browser Application. The only change I made was to change this to a full trust application (My Project Security tab This is a full trust application). In the publish wizard, I am choosing the following: Where do you want to publish the application? - I chose to publish to a local directory How will user install the application? - I chose "From a CD-ROM or DVD-ROM" Will the application be available offline - All choices were grayed out

  Read the article

• In IIS6, how to provide authenticated access to static files on remote server

  - by frankadelic

  We have a library of ZIP files that we would like to make available for download at an ASP.NET site. The files are sitting on a NAS device that is accessible from out web farm. Here is our initial strategy: Map an IIS virtual directory to the shared drive at path /zipfiles Users can download the zip files when given the URL However, if users share links to the files, anyone can download them. We would instead like to make use of the ASP.NET forms authentication in our site to validate users' requests before initiating the file transfer. A few problems: A request for a zip file is handled by IIS, not ASP.NET. So it is not subject to forms authentication. In addition, we don't want ASP.NET to handle the request, because it uses up an ASP.NET thread and is not scalable for download of large files. So, configuring the asp.net dll to handle *.zip requests is not an option. Any ideas on this? One idea we've tossed around is this: Initial request for download will be for an ashx handler. This handler will, after authentication, generate a download token which is saved to a database. Then, the user is redirected to the file with token appended in QueryString (e.g. /files/xyz.zip?token=123456789). An ISAPI plugin will be used to check the token. Also, the token will expire after x amount of time. Any thoughts on this? I have not implemented an ISAPI plugin so I'm not sure if this will even work. I would like to avoid custom coding since security is an issue and I'd prefer to use a time-tested solution.

  Read the article

• AnkhSVN: Cannot checkout Subsolution due to existing "versioned" folder

  - by lostiniceland

  Hello Everyone I am using Subversion since quite some time for Java-Development and I have setup a repository on my local NAS. Since I have a MSDN subscription via my company I recently installed Visual Studio 2010 to do a small project with .NET. According to some "best-practices" my project folder looks like the following. MySolution main.sln Services services.sln Service A files Service A Test files View projectfiles Persistence persistence.sln PersistenceXml files PersistenceXml Test files PersistenceDB files PersistenceDB Test files The idea is, that the main.sln only contains the projects for the application, meaning no test projects. The subsolutions, contain the project(s) and their corresponding testprojects. I was able to put all those projects under versioncontrol with AnkhSVN, so I have the same structure there in my trunk. Commiting changes was also no problem. Now I would like to check the this out on another machine. I was able to check out the main.sln which downloaded everything that was inside this solution. It skipped the services.sln, persistence.sln and all the test-projects. Until now everything is fine. Now, here comes the problem: when I am tryting to check out the subsolution (eg. services.sln) I get an error, I think it was UnsupportedOperation. I guess this happens because ankhsvn is tryting to download the folder Service A again and create ist hidden .svn folder which is already present. The only workaround I can think of by now is installing Tortoise SVN and check out the whole thing at once. It would be nicer though to have everything from within VS. Does anyone know how I can solve this? Is another client the only solution?

  Read the article

• R: Are there any alternatives to loops for subsetting from an optimization standpoint?

  - by Adam

  A recurring analysis paradigm I encounter in my research is the need to subset based on all different group id values, performing statistical analysis on each group in turn, and putting the results in an output matrix for further processing/summarizing. How I typically do this in R is something like the following: data.mat <- read.csv("...") groupids <- unique(data.mat$ID) #Assume there are then 100 unique groups results <- matrix(rep("NA",300),ncol=3,nrow=100) for(i in 1:100) { tempmat <- subset(data.mat,ID==groupids[i]) #Run various stats on tempmat (correlations, regressions, etc), checking to #make sure this specific group doesn't have NAs in the variables I'm using #and assign results to x, y, and z, for example. results[i,1] <- x results[i,2] <- y results[i,3] <- z } This ends up working for me, but depending on the size of the data and the number of groups I'm working with, this can take up to three days. Besides branching out into parallel processing, is there any "trick" for making something like this run faster? For instance, converting the loops into something else (something like an apply with a function containing the stats I want to run inside the loop), or eliminating the need to actually assign the subset of data to a variable?

  Read the article

• model.matrix() with na.action=NULL?

  - by Vincent

  I have a formula and a data frame, and I want to extract the model.matrix(). However, I need the resulting matrix to include the NAs that were found in the original dataset. If I were to use model.frame() to do this, I would simply pass it na.action=NULL. However, the output I need is of the model.matrix() format. Specifically, I need only the right-hand side variables, I need the output to be a matrix (not a data frame), and I need factors to be converted to a series of dummy variables. I'm sure I could hack something together using loops or something, but I was wondering if anyone could suggest a cleaner and more efficient workaround. Thanks a lot for your time! And here's an example: dat <- data.frame(matrix(rnorm(20),5,4), gl(5,2)) dat[3,5] <- NA names(dat) <- c(letters[1:4], 'fact') ff <- a ~ b + fact # This omits the row with a missing observation on the factor model.matrix(ff, dat) # This keeps the NA, but it gives me a data frame and does not dichotomize the factor model.frame(ff, dat, na.action=NULL) Here is what I would like to obtain: (Intercept) b fact2 fact3 fact4 fact5 1 1 0.7266086 0 0 0 0 2 1 -0.6088697 0 0 0 0 3 NA 0.4643360 NA NA NA NA 4 1 -1.1666248 1 0 0 0 5 1 -0.7577394 0 1 0 0 6 1 0.7266086 0 1 0 0 7 1 -0.6088697 0 0 1 0 8 1 0.4643360 0 0 1 0 9 1 -1.1666248 0 0 0 1 10 1 -0.7577394 0 0 0 1

  Read the article

• Oracle Embedded - Duração de meio dia - 14/Abr/10

  - by Claudia Costa

  Convidamo-lo a participar num evento que a Oracle irá realizar no próximo dia 14 de Abril, dedicado a soluções para sistemas Embedded.   A Oracle tem sido desde sempre o líder indisputado - em termos de desempenho, fiabilidade e escalabilidade - em sistemas de gestão de base de dados para aplicações críticas de gestão das grandes organizações. Hoje, no entanto, as aplicações críticas são implementadas não apenas nos data centers, mas cada vez mais em dispositivos móveis, nas infraestruturas de rede e em sistemas de aplicação específica. Por isso, o compromisso da Oracle em desenvolver os melhores produtos de gestão de dados alarga-se hoje do data center às aplicações designadas edge e embedded.   A Oracle oferece hoje a gama mais completa do mercado em tecnologias embedded, tanto para ISVs como para fabricantes de dispositivos e equipamentos, proporcionando-lhe a escolha dos produtos de base de dados e middleware embeddable que melhor se ajustem aos seus requisitos técnicos:   ·         Oracle Database 11g ·         Oracle Database Lite 11g ·         Oracle Berkeley DB ·         Oracle TimesTen In-Memory Database ·         Oracle Fusion Middleware 11g ·         Java for Business   Mais informação sobre produtos embedded Oracle aqui.   Segundo a IDC, a Oracle é hoje o líder mundial no mercado das bases de dados embedded com uma quota de mercado de 28,2% em 2008, estando a crescer a um ritmo 40% superior ao seu concorrente mais próximo e 50% superior à media do mercado.   A par com a riqueza da sua oferta tecnológica, a Oracle oferece igualmente modelos de licenciamento e de preços que se ajustam às necessidades de quem usa esses componentes tecnológicos como peças de uma solução final integrada a se vendida aos seus cliente finais.   A Oracle está empenhada em contribuir para o sucesso da sua empresa. Ao pôr os seus interesses acima de tudo, ganha a sua empresa e ganha a Oracle. E, mais importante que tudo, ganham os clientes, que recebem as melhores soluções possíveis.   Em resumo, as soluções embedded da Oracle proporcionam-lhe:   ·         Melhores produtos ·         Clientes mais satisfeitos ·         Maior rentabilidade das suas soluções   Agenda: ·         Oracle and Embedded ·         Embedded Market Trends ·         Oracle portfolio Oracle Database 11g o    Oracle Berkeley DB  o    Oracle Database Lite o    Oracle TimesTen o    Oracle Fusion Middleware ·         Demo: Berkeley DB ·         Embedded Software Licensing (ESL) Models   -----------------------------------------------------------------------------------   Clique aqui e registe-se.   Horário e Local: 9h30 - 13h00 Oracle Lagoas Park - Edf. 8 Porto Salvo   Para mais informações, por favor contacte: Melissa Lopes 214235194  

  Read the article

• ASP.NET MVC, Web API, Razor, e Open Source (Código Aberto)

  - by Leniel Macaferi

  A Microsoft tornou o código fonte da ASP.NET MVC disponível sob uma licença open source (de código aberto) desde a primeira versão V1. Nós também integramos uma série de grandes tecnologias de código aberto no produto, e agora entregamos jQuery, jQuery UI, jQuery Mobile, jQuery Validation, Modernizr.js, NuGet, Knockout.js e JSON.NET como parte integrante dos lançamentos da ASP.NET MVC. Estou muito animado para anunciar hoje que também iremos liberar o código fonte da ASP.NET Web API e ASP.NET Web Pages (também conhecido como Razor) sob uma licença open source (Apache 2.0), e que iremos aumentar a transparência do desenvolvimento de todos os três projetos hospedando seus repositórios de código no CodePlex (usando o novo suporte ao Git anunciado na semana passada - em Inglês). Isso permitirá um modelo de desenvolvimento mais aberto, onde toda a comunidade será capaz de participar e fornecer feedback nos checkins (envios de código), corrigir bugs, desenvolver novos recursos, e construir e testar os produtos diariamente usando a versão do código-fonte e testes mais atualizada possível. Nós também pela primeira vez permitiremos que os desenvolvedores de fora da Microsoft enviem correções e contribuições de código que a equipe de desenvolvimento da Microsoft irá rever para potencial inclusão nos produtos. Nós anunciamos uma abordagem de desenvolvimento semelhantemente aberta com o Windows Azure SDK em Dezembro passado, e achamos que essa abordagem é um ótimo caminho para estreitar as relações, pois permite um excelente ciclo de feedback com os desenvolvedores - e, finalmente, permite a entrega de produtos ainda melhores, como resultado. Muito importante - ASP.NET MVC, Web API e o Razor continuarão a ser totalmente produtos suportados pela Microsoft que são lançados tanto independentemente, bem como parte do Visual Studio (exatamente da mesma maneira como é feito hoje em dia). Eles também continuarão a ser desenvolvidos pelos mesmos desenvolvedores da Microsoft que os constroem hoje (na verdade, temos agora muito mais desenvolvedores da Microsoft trabalhando na equipe da ASP.NET). Nosso objetivo com o anúncio de hoje é aumentar ainda mais o ciclo de feedback/retorno sobre os produtos, para nos permitir oferecer produtos ainda melhores. Estamos realmente entusiasmados com as melhorias que isso trará. Saiba mais Agora você pode navegar, sincronizar e construir a árvore de código fonte da ASP.NET MVC, Web API, e Razor através do website http://aspnetwebstack.codeplex.com.  O repositório Git atual no site refere-se à árvore de desenvolvimento do marco RC (release candidate/candidata a lançamento) na qual equipe vem trabalhando nas últimas semanas, e esta mesma árvore contém ambos o código fonte e os testes, e pode ser construída e testada por qualquer pessoa. Devido aos binários produzidos serem bin-deployable (DLLs instaladas diretamente na pasta bin sem demais dependências), isto permite a você compilar seus próprios builds e experimentar as atualizações do produto, tão logo elas sejam adicionadas no repositório. Agora você também pode contribuir diretamente para o desenvolvimento dos produtos através da revisão e envio de feedback sobre os checkins de código, enviando bugs e ajudando-nos a verificar as correções tão logo elas sejam enviadas para o repositório, sugerindo e dando feedback sobre os novos recursos enquanto eles são implementados, bem como enviando suas próprias correções ou contribuições de código. Note que todas as submissões de código serão rigorosamente analisadas ??e testadas pelo Time da ASP.NET MVC, e apenas aquelas que atenderem a um padrão elevado de qualidade e adequação ao roadmap (roteiro) definido para as próximas versões serão incorporadas ao código fonte do produto. Sumário Todos nós da equipe estamos realmente entusiasmados com o anúncio de hoje - isto é algo no qual nós estivemos trabalhando por muitos anos. O estreitamento no relacionamento entre a comunidade e os desenvolvedores nos permitirá construir produtos ainda melhores levando a ASP.NET para o próximo nível em termos de inovação e foco no cliente. Obrigado! Scott P.S. Além do blog, eu uso o Twitter para disponibilizar posts rápidos e para compartilhar links. Meu apelido no Twitter é: @scottgu Texto traduzido do post original por Leniel Macaferi.

  Read the article

• Oracle Embedded - 14 de Abril

  - by Claudia Costa

    Convidamo-lo a participar num evento que a Oracle irá realizar no próximo dia 14 de Abril, dedicado a soluções para sistemas Embedded.   A Oracle tem sido desde sempre o líder indisputado - em termos de desempenho, fiabilidade e escalabilidade - em sistemas de gestão de base de dados para aplicações críticas de gestão das grandes organizações. Hoje, no entanto, as aplicações críticas são implementadas não apenas nos data centers, mas cada vez mais em dispositivos móveis, nas infraestruturas de rede e em sistemas de aplicação específica. Por isso, o compromisso da Oracle em desenvolver os melhores produtos de gestão de dados alarga-se hoje do data center às aplicações designadas edge e embedded.   A Oracle oferece hoje a gama mais completa do mercado em tecnologias embedded, tanto para ISVs como para fabricantes de dispositivos e equipamentos, proporcionando-lhe a escolha dos produtos de base de dados e middleware embeddable que melhor se ajustem aos seus requisitos técnicos:   ·         Oracle Database 11g ·         Oracle Database Lite 11g ·         Oracle Berkeley DB ·         Oracle TimesTen In-Memory Database ·         Oracle Fusion Middleware 11g ·         Java for Business   Mais informação sobre produtos embedded Oracle aqui.   Segundo a IDC, a Oracle é hoje o líder mundial no mercado das bases de dados embedded com uma quota de mercado de 28,2% em 2008, estando a crescer a um ritmo 40% superior ao seu concorrente mais próximo e 50% superior à media do mercado.   A par com a riqueza da sua oferta tecnológica, a Oracle oferece igualmente modelos de licenciamento e de preços que se ajustam às necessidades de quem usa esses componentes tecnológicos como peças de uma solução final integrada a se vendida aos seus cliente finais.   A Oracle está empenhada em contribuir para o sucesso da sua empresa. Ao pôr os seus interesses acima de tudo, ganha a sua empresa e ganha a Oracle. E, mais importante que tudo, ganham os clientes, que recebem as melhores soluções possíveis.   Em resumo, as soluções embedded da Oracle proporcionam-lhe:   ·         Melhores produtos ·         Clientes mais satisfeitos ·         Maior rentabilidade das suas soluções   Agenda: ·         Oracle and Embedded ·         Embedded Market Trends ·         Oracle portfolio Oracle Database 11g o    Oracle Berkeley DB  o    Oracle Database Lite o    Oracle TimesTen o    Oracle Fusion Middleware ·         Demo: Berkeley DB ·         Embedded Software Licensing (ESL) Models   -----------------------------------------------------------------------------------   Clique aqui e registe-se.   Horário e Local: 9h30 - 18h00 Oracle Lagoas Park - Edf. 8 Porto Salvo   Para mais informações, por favor contacte: Melissa Lopes 214235194  

  Read the article

• Oracle Embedded - Porto (29/Abr/10)

  - by Claudia Costa

  Convidamo-lo a participar num evento que a Oracle irá realizar no próximo dia 29 de Abril no Porto, dedicado a soluções para sistemas Embedded.   A Oracle tem sido desde sempre o líder indisputado - em termos de desempenho, fiabilidade e escalabilidade - em sistemas de gestão de base de dados para aplicações críticas de gestão das grandes organizações. Hoje, no entanto, as aplicações críticas são implementadas não apenas nos data centers, mas cada vez mais em dispositivos móveis, nas infraestruturas de rede e em sistemas de aplicação específica. Por isso, o compromisso da Oracle em desenvolver os melhores produtos de gestão de dados alarga-se hoje do data center às aplicações designadas edge e embedded.   A Oracle oferece hoje a gama mais completa do mercado em tecnologias embedded, tanto para ISVs como para fabricantes de dispositivos e equipamentos, proporcionando-lhe a escolha dos produtos de base de dados e middleware embeddable que melhor se ajustem aos seus requisitos técnicos: ·         Oracle Database 11g ·         Oracle Database Lite 11g ·         Oracle Berkeley DB ·         Oracle TimesTen In-Memory Database ·         Oracle Fusion Middleware 11g ·         Java for Business   Segundo a IDC, a Oracle é hoje o líder mundial no mercado das bases de dados embedded com uma quota de mercado de 28,2% em 2008, estando a crescer a um ritmo 40% superior ao seu concorrente mais próximo e 50% superior à media do mercado.   A par com a riqueza da sua oferta tecnológica, a Oracle oferece igualmente modelos de licenciamento e de preços que se ajustam às necessidades de quem usa esses componentes tecnológicos como peças de uma solução final integrada a se vendida aos seus cliente finais.   Em resumo, as soluções embedded da Oracle proporcionam-lhe:   ·         Melhores produtos ·         Clientes mais satisfeitos ·         Maior rentabilidade das suas soluções   Mais informação sobre produtos embedded Oracle aqui   Agenda: ·         Oracle and Embedded ·         Embedded Market Trends ·         Oracle portfolio Oracle Database 11g o    Oracle Berkeley DB  o    Oracle Database Lite o    Oracle TimesTen o    Oracle Fusion Middleware ·         Demo: Berkeley DB ·         Embedded Software Licensing (ESL) Models --------------------------------------------------------------------------- Clique aqui e registe-se.   Horário e Local: 15h00 - 18h00 Hotel Infante Sagres | Praça D. Filipa De Lencastre, 62 | 4050-259 | Porto   Para mais informações, por favor contacte: Melissa Lopes 214235194

  Read the article

• SQL SERVER – Select the Most Optimal Backup Methods for Server

  - by pinaldave

  Backup and Restore are very interesting concepts and one should be very much with the concept if you are dealing with production database. One never knows when a natural disaster or user error will surface and the first thing everybody wants is to get back on point in time when things were all fine. Well, in this article I have attempted to answer a few of the common questions related to Backup methodology. How to Select a SQL Server Backup Type In order to select a proper SQL Server backup type, a SQL Server administrator needs to understand the difference between the major backup types clearly. Since a picture is worth a thousand words, let me offer it to you below. Select a Recovery Model First The very first question that you should ask yourself is: Can I afford to lose at least a little (15 min, 1 hour, 1 day) worth of data? Resist the temptation to save it all as it comes with the overhead – majority of businesses outside finances can actually afford to lose a bit of data. If your answer is YES, I can afford to lose some data – select a SIMPLE (default) recovery model in the properties of your database, otherwise you need to select a FULL recovery model. The additional advantage of the Full recovery model is that it allows you to restore the data to a specific point in time vs to only last backup time in the Simple recovery model, but it exceeds the scope of this article Backups in SIMPLE Recovery Model In SIMPLE recovery model you can select to do just Full backups or Full + Differential. Full Backup This is the simplest type of backup that contains all information needed to restore the database and should be your first choice. It is often sufficient for small databases, but note that it makes a big impact on the performance of your database Full + Differential Backup After Full, Differential backup picks up all of the changes since the last Full backup. This means if you made Full, Diff, Diff backup – the last Diff backup contains all of the changes and you don’t need the previous Differential backup. Differential backup is obviously smaller and carries less performance overhead Backups in FULL Recovery Model In FULL recovery model you can select Full + Transaction Log or Full + Differential + Transaction Log backup. You have to create Transaction Log backup, because at that time the log is being truncated. Otherwise your Transaction Log will grow uncontrollably. Full + Transaction Log Backup You would always need to perform a Full backup first. Then a series of Transaction log backup. Note that (in contrast to Differential) you need ALL transactions to log since the last Full of Diff backup to properly restore. Transaction log backups have the smallest performance overhead and can be performed often. Full + Differential + Transaction Log Backup If you want to ease the performance overhead on your server, you can replace some of the Full backup in the previous scenario with Differential. You restore scenario would start from Full, then the Last Differential, then all of the remaining transactions log backups Typical backup Scenarios You may say “Well, it is all nice – give me the examples now”. As you may already know, my favorite SQL backup software is SQLBackupAndFTP. If you go to Advanced Backup Schedule form in this program and click “Load a typical backup plan…” link, it will give you these scenarios that I think are quite common – see the image below. The Simplest Way to Schedule SQL Backups I hate to repeat myself, but backup scheduling in SQL agent leaves a lot to be desired. I do not know the simple way to schedule your SQL server backups than in SQLBackupAndFTP – see the image below. The whole backup scheduling with compression, encryption and upload to a Network Folder / HDD / NAS Drive / FTP / Dropbox / Google Drive / Amazon S3 takes just a few minutes – see my previous post for the review. Final Words This post offered an explanation for major backup types only. For more complicated scenarios or to research other options as usually go to MSDN. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Xsigo and Oracle's Storage

  - by Philippe Deverchère

  Xsigo, a virtual network infrastructure provider, has recently been acquired by Oracle. Following this acquisition, one might ask ourselves why it is important to Oracle and how Oracle's storage is going to benefit on the long term from this virtualized infrastructure layer. Well, the first thing to understand is that Virtual Networking addresses both network and storage connectivity. Oracle Virtual Networking, as the Xsigo technology is now called, connects any server to any network and storage, so this is not just about connecting servers to the Internet or Intranet. It is also for a large part connecting servers to NAS and SAN storage. Connecting servers to storage has become increasingly complex in the past few years because of the strong emergence of virtualization at the Operating System level. 50% of enterprise workloads are now virtualized, up from 18% in 2009, resulting in a strong consolidation of various applications in a high density server footprint. At the same time, server I/O capability increased 8x in the last 8 years. All this has pushed IT administrators to multiply the number of I/O connections in the back-end of their physical servers, resulting in a messy and very hard to manage networking infrastructure. Here is a typical view of a rack back-end when no virtual networking is used. We consider that today: - 75% of users have ten or more Ethernet ports per server - 85% of users have two or more SAN ports per server - 58% have had to add connectivity to a server specifically for VMs - 65% consider cable reduction a priority The average is 12 or more ports per server, resulting in an extremely complex infrastructure to manage. What Oracle wants to achieve with its Oracle Virtual Networking offering is pretty simple. The objective is to eliminate the complexity through a dramatic reduction of cabling between servers and storage/networks. It is also to provide a software based management system so that any server can be connected to any network or any storage, on demand, and without physical intervention on the infrastructure. At the end of the day, the picture on the left shows what one wants to get for the back-end of customer's racks: just a couple of connections on each physical server to provide a simple, agile and fast network infrastructure for both storage and networking access. This is exactly what the Oracle Virtual Networking solution does. It transforms a complex, error-prone, difficult to manage and expensive networking infrastructure into a simple, high performance and agile solution for the data center. Practically speaking, and for the sake of simplicity, imagine that each server just hosts a minimal number of physical InfiniBand HCAs (Host Channel Adapter) with two links (for redundancy) onto the Oracle Fabric Interconnect director. Using the Oracle Fabric Manager software, you'll then be able to create virtual NICs and HBAs (called vNIC and vHBA) that will be seen by the servers as standard NICs and HBAs and associate them to networks and storage systems which are physically connected to the back-end of the director through standard Fibre Channel and Ethernet GbE/10GbE ports. In addition to this incredibly simple "at-a-click" connectivity capability, the Oracle Virtual Networking solution offers powerful features such as network isolation, Quality of Service, advanced performance monitoring and non-disruptive reconfiguration, migration and scalability of networking infrastructure. So let's go back now to our initial question: why is Oracle Virtual Networking especially important to Oracle's storage solutions? After all, one could connect any storage in the back-end of the Oracle Fabric Interconnect directors, right? The answer is pretty simple: since Oracle owns both the virtualized networking infrastructure and the storage (ZFS-SA, Pillar Axiom and tape), it is possible to imagine several ways in the future to add value when it comes to connect storage to a virtualized storage network: enhanced storage capabilities, converged management between storage and network, improved diagnostic capabilities and optimized integration resulting in higher performance and unique features/functions. Of course, all this is not going to be done overnight, and future will tell us is which evolutions come first. But there is little doubt that the integration of Xsigo within Oracle is going to create opportunities for Oracle's storage!

  Read the article

• SQL Server IO handling mechanism can be severely affected by high CPU usage

  - by sqlworkshops

  Are you using SSD or SAN / NAS based storage solution and sporadically observe SQL Server experiencing high IO wait times or from time to time your DAS / HDD becomes very slow according to SQL Server statistics? Read on… I need your help to up vote my connect item – https://connect.microsoft.com/SQLServer/feedback/details/744650/sql-server-io-handling-mechanism-can-be-severely-affected-by-high-cpu-usage. Instead of taking few seconds, queries could take minutes/hours to complete when CPU is busy.In SQL Server when a query / request needs to read data that is not in data cache or when the request has to write to disk, like transaction log records, the request / task will queue up the IO operation and wait for it to complete (task in suspended state, this wait time is the resource wait time). When the IO operation is complete, the task will be queued to run on the CPU. If the CPU is busy executing other tasks, this task will wait (task in runnable state) until other tasks in the queue either complete or get suspended due to waits or exhaust their quantum of 4ms (this is the signal wait time, which along with resource wait time will increase the overall wait time). When the CPU becomes free, the task will finally be run on the CPU (task in running state).The signal wait time can be up to 4ms per runnable task, this is by design. So if a CPU has 5 runnable tasks in the queue, then this query after the resource becomes available might wait up to a maximum of 5 X 4ms = 20ms in the runnable state (normally less as other tasks might not use the full quantum).In case the CPU usage is high, let’s say many CPU intensive queries are running on the instance, there is a possibility that the IO operations that are completed at the Hardware and Operating System level are not yet processed by SQL Server, keeping the task in the resource wait state for longer than necessary. In case of an SSD, the IO operation might even complete in less than a millisecond, but it might take SQL Server 100s of milliseconds, for instance, to process the completed IO operation. For example, let’s say you have a user inserting 500 rows in individual transactions. When the transaction log is on an SSD or battery backed up controller that has write cache enabled, all of these inserts will complete in 100 to 200ms. With a CPU intensive parallel query executing across all CPU cores, the same inserts might take minutes to complete. WRITELOG wait time will be very high in this case (both under sys.dm_io_virtual_file_stats and sys.dm_os_wait_stats). In addition you will notice a large number of WAITELOG waits since log records are written by LOG WRITER and hence very high signal_wait_time_ms leading to more query delays. However, Performance Monitor Counter, PhysicalDisk, Avg. Disk sec/Write will report very low latency times.Such delayed IO handling also occurs to read operations with artificially very high PAGEIOLATCH_SH wait time (with number of PAGEIOLATCH_SH waits remaining the same). This problem will manifest more and more as customers start using SSD based storage for SQL Server, since they drive the CPU usage to the limits with faster IOs. We have a few workarounds for specific scenarios, but we think Microsoft should resolve this issue at the product level. We have a connect item open – https://connect.microsoft.com/SQLServer/feedback/details/744650/sql-server-io-handling-mechanism-can-be-severely-affected-by-high-cpu-usage - (with example scripts) to reproduce this behavior, please up vote the item so the issue will be addressed by the SQL Server product team soon.Thanks for your help and best regards,Ramesh MeyyappanHome: www.sqlworkshops.comLinkedIn: http://at.linkedin.com/in/rmeyyappan

  Read the article

• ????????????????

  - by Yusuke.Yamamoto

  ????????? ????????? ????????? ????·???? ?????:Oracle???????·??????(????)??:?????????????? Pickup!:IT???????????!|????????:100???????!|???????????? ????????:?Oracle DB?????????????????????Windows?VMware?? ?????:Oracle OpenWorld Tokyo 2012|JavaOne Tokyo 2012|??????:151 ?OTN ???? ?????? ????????:???????100???????! ?????????????????Amazon????Get! ???? Oracle Technology Network, ????/????, ??IT???????·?????????????? ???????/???MySQL?????? ?????? ???????/???MySQL????? ?????????Oracle VM VirtualBox????Oracle Real Application Clusters (RAC) 11g Release 2????? ???????/??????????????????????????????? ???????/?????????????/????·????????Flashback Database with SSD? ????? ????? Oracle?????????????????????????!???????????? Oracle Enterprise Manager 12c(EM12c):????????? ~????????~ ???????????!??????·??????? Oracle Linux 5.8?????????? ???DB?????Oracle SQL Developer 3.1???????????? Oracle??????(OUI:Oracle Universal Installer)???? ????? ???? ????????? ????????????·???????? ????????????? ???????? 11gR2 ?????????? Oracle Database 11g R2 Oracle WebLogic Server 11g R1 Oracle Enterprise Manager 11g R1 ????? ????????? Oracle Database ????????????????·?? ???????/???????????????? ?????????(????????, ???, etc) ????????(???, ?????, REDO, ???·????, etc) ????·?????????????????(?????, ???, ??, ??, ??? etc) ????·?????????(??, etc) ????????????? ???????????????????·?????? ??????? ???? ????????·??|SQL Server Windows Server ??????????PL/SQL|Java|.NET|PHP ??/??? ORACLE MASTER ???? DWH(?????????)??·?? ????? ?????(SAN, NAS, SSD, etc) Oracle Database ??????? Amazon EC2 Microsoft Excel Microsoft Visual Studio MSFC/MSCS(Microsoft Cluster Service) SAP ??·??????? Oracle Database Oracle Database 11g Release 2(11gR2) Oracle Database Standard Edition ????????: Advanced Compression ?????????: Advanced Security Application Express(APEX) Automatic Storage Management(ASM) SSD???Oracle???: Database Smart Flash Cache ??????????: Data Guard/Active Data Guard Data Pump Oracle Data Provider for .NET(ODP.NET) ????: Oracle Text Partitioning(???????/?????????) DB????: Real Application Clusters(RAC) Real Application Testing Recovery Manager(RMAN) SQL*Loader|SQL*Plus|Statspack ??????|????????|???????? Database Appliance Database Firewall Exadata Database Machine SQL Developer ?????DB: TimesTen In-Memory Database Oracle Fusion Middleware Java Oracle Coherence Oracle Data Integrator(ODI) Oracle GoldenGate Oracle JRockit JVM Oracle WebLogic Server Oracle Enterprise Manager for Database|for Middleware ????????????: Oracle Application Testing Suite Oracle Linux Oracle Solaris DTrace|ZFS|???/???? Oracle VM Server for x86 ?????? ???????? ?????????Oracle???????????????·????????????????? ?????????(??·??????) OTN??????(??????) ???????(????????) Oracle University(??) ??????! ?????... ????? ?????? ????? ?????? ?????|?Sun?? ???????? OTN???????? OTN(????) ?????? ???? OTN???|???? OTN?????? ??????? ?????? ???????? ???? ???????

  Read the article

• New Computer Build Questions

  - by MJ

  I'm in the process of gathering parts and specs for a new machine. I wear many hats, so the machine needs to do a lot. I need at least 2 monitor support, if not three. I also play many online MMOs (wow, aion, war hammer, etc), along with some freelance programming projects. I already have a case which is very large, so it will fit anything. I have 2 other SATA HDs. They are more for storage and basic programs. I feel that the best improvement could be done with a solid state HD, true or not? I'm more of a software/programming guy, so ANY input at all on improving this system build would be appreciated. I have a few questions with this list. AMD or Intel? I don't know enough about either to choose what would best fit me. Thanks! **EDIT: Thanks for the input everyone! Here are some answers: I do a lot of programming and gaming, so I do need things for both. The newer video card covers the gaming aspect, as well as allowing me to have many monitors. (hopefully upgrade to dual 30' or more) I don't need any additional HDs at this time. I have a SATA 160g and 120g from my previous computer, and a NAS system with over 2TB of storage on the homenetwork. I just wanted a fast HD for OS/programs/games. With the memory. I have used G.SKILL before in 2 system builds. It's done excellent for me in them. Very stable. **EDIT2: Made some additional changes. Lowered the power supply down to 750, which saves me more $$. Also changed the SSD to 2 WD 650G HDs. Thinking of doing a CPU upgrade to the 3.4GHZ AMD Phenom II X4 965 Black Edition Deneb 3.4GHz System Specs - Budget:$1500 CPU: AMD Phenom II X4 955 Black Edition Deneb 3.2GHz MB: GIGABYTE GA-MA790GPT-UD3H AM3 AMD 790GX HDMI ATX Memory: G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 1066 Video: DIAMOND 5870PE51G Radeon HD 5870 (Cypress XT) 1GB 256-bit GD Power Supply: XCLIO GREATPOWER 1000W ATX12V SLI Ready CrossFire Ready HD:Intel X25-M Mainstream SSDSA2MH080G2C1 2.5" 80GB SATA II MLC Changes: Power Supply: CORSAIR CMPSU-750TX 750W ATX12V / EPS12V HD: 2x Western Digital Caviar Blue WD6400AAKS 640GB CPU: AMD Phenom II X4 965 Black Edition Deneb 3.4GHz

  Read the article

• DSL Modem with Wireless Router

  - by David

  I have a D-Link WBR-1310 wireless router and a TP-Link TD-8616 DSL modem. My old DSL modem died recently and I got the TP-Link as a replacement. With my old DSL modem, I plugged it into the WAN port on my D-Link and I could reach the internet through wireless and through the network. However, when I plugged the new TP-Link into the WAN port, I was not able to get any internet connectivity (either on the network ports or through wireless). So I plugged my labtop directly into the TP-Link DSL modem and I was able to get internet connectivity. I'm trying to figure out why my labtop can see the internet connection, but not the D-Link router. I think that the problem is due to the IP networking. My D-Link was originally set to have IP address 192.168.1.1. According to the documentation for the TP-Link DSL modem, it uses 192.168.1.1 as its IP address. I do not believe that my old DSL modem had an IP address. I logged into my D-Link router and changed its IP address to 192.168.1.2 and restarted it. Unfortunately, I still could not see the internet from my wireless devices. I've read a few forum postings which implied that I needed to setup a "bridge" between the two networks. Does that sound correct? Why didn't my old DSL modem require a bridge? I read pg. 12-13 of my D-Link's manual and they suggest that I need to disable UPnP, DHCP, and then plug the DSL modem into one of the LAN ports on my router. I'm concerned about doing this since I don't think that the firewall will work if I plug my DSL modem into one of the LAN ports. I also have a home NAS on my network and I wouldn't want that to be available over the internet. Does anyone have any advice about how I can get my TPLink DSL modem to work with my D-Link router? Thanks!

  Read the article

• Are FC and SAS DAS devices standard enough?

  - by user222182

  Before I ask my questions, here is some background info that may or may not be useful: For the first time I find myself needing a DAS solution. My priority is data through-put in a single direction. I can write large blocks, and I don't need to read at the same time. The server (the data producing device) is not really a typical server, its a very powerful single board computer. As such I have limited options when it comes to the add-in cards I can install since it must use the fairly uncommon interface, XMC. Currently I believe I am limited PCIex8 gen 1 which means that the likely bottle neck for me will be this 16gbps connection. XMC Boards I have found so far offer the following connections: a) Dual 10GBE ethernet controller, total throughput 20gbps b) Dual Quad SAS 2.0 Connectors (SFF-8XXX) HBA (no raid), total throughput 48 gbps c) Dual FC 8gb HBA (no raid), total throughput 16gbps My questions for you guys are: 1) Are SAS and/or FC, and by extension their HBAs, standard enough that I could purchase a Dell or Aberdeen storage server with a raid controller that has external SAS or FC ports and expect that I can connect it to my SAS or FC HBA, be presented with a single volume (if I so configured the storage server), all without having to check for HBA compatibility? 2) On a device like a Dell PowerVault (either DAS or NAS) is there an OS on it to concern myself with, or is it meant to be remotely managed? Is there a local interface in case I cant remotely manage it (i.e. if my single board computer uses an OS not supported by Dell OpenManage). Would this be true of nearly any device which calls itself a DAS? 3) If I purchase some sort of Supermicro storage chassis, installed a raid controller with external connections, is there a nice lightweight OS I can run just for management of the controller? Would I even need an OS since the raid card would be configured pre-boot anyway? 4) It is much easier to buy XMC based 10gigabit ethernet cards (generally dual port). In what ways would I be getting into trouble by using iSCSI as a DAS are direct cabling with SFP+ cables? Thanks in advance

  Read the article

• Rsync: windows 7, synology: login error and permission denied error

  - by loonboon

  Good day to all of you all, I'm running into strange/stupid errors, and I hope anybody would be so kind to help me out. I have to admit, I am by no means a guru, so please bear with me :-) Situation: -Synology NAS (runs Linux), and Windows 7 desktop (1 normal/restricted user Lisa and 1 admin user). - Data from W7 desktop to be rsynced to synology: /volume1/home/Lisa/Backup - Rsync command: c:\cygwin\bin\rsync -avz /cygdrive/e/Lisa/ [email protected]:/volume1/homes/Lisa/Backup - I've set up ssh per these two threads: a. http://www.cesareriva.com/archives/102 b. http://www.cesareriva.com/archives/112 Now the horrors begin: - root is allowed to run the rsync succesfully, however, he doesn't login automatically (so I can not use rsync in W7 batchscripts, which is of course required). - Lisa is allowed to login automatically but he can not succesfully finish the rsync command because of permission errors: rsync change dir /volume1/homes/Lisa/Backup failed: permissions denied. This happens for each and every file and subdir rsync tries to create. However, the main directory (Backup) is created. When I try to copy files from windows explorer to the directory 'Backup' using the very same user Lisa everything goes smoothly. So, obviously, there is a permission problem somewhere; either my rsync-command isn't correct, or the folder permissions for homes/Lisa aren't correct (but, then again, Windows 7 copies files to that folder without any problems, so that does make me believe the homes/Lisa-permissions don't appear to be the problem). I also tried adding: --chmod=Dugo+x --chmod=ugo+r which I found somewhere on the web, to the rsync-command, but this didn't solve any problem and gave the exact errors. Would anybody please please help me on how to fix this? I am utterly frustrated about this, because I have been trying for 1 month to get everything to work and it simply doesn't work. I bought the big Synology to end the horrors of 20 external USB-disks for once and for all (we have many pictures and home vids of our deceased dogs and want to watch these, the horrors being 'what material is on what disk'). I'll gladly return the favour of somebody helping me out by buying you a nice beer (paypal), if you could end my misery. I am not extremely skilled on Linux (not at all :-( ) so if you could give an extra word when possible so I understand what to do, I'd be very grateful. I really hope somebody can help me out, Thank you in advance, Lisa

  Read the article

• Suggestions for splitting server roles amongst Hyper-V virtual servers / RAID6 or RAID10? / AppAssure

  - by Anon

  We have 2 Hyper-V hosts at present running 1 virtual server that was converted from a physical box running all roles. My plan is to split the roles over various virtual machines, upgrading to the latest software versions as I go, and use the backup server as a standby in case the main server fails. AppAssure backup software has a feature called Virtual Standby, so the VHD's can be ready to be fired up on the backup server if necessary. Off-site backups will be done via external USB drive for now. I'm just seeking some input/suggestions into how I'm planning to split the roles out amongst various virtual servers. Also, I'm curious how to setup the storage on the servers. We do not have any NAS's, SAN'S or any budget for this. What would the best RAID level be to use? I'm thinking either RAID6 (which is currently used) however I'm concerned about the write speeds, or RAID10 but again I'm worried that I can only lose 1 drive (from the same mirror) as opposed to any 2 with RAID6. I realise I have a hot swap for this, but what if a further drive fails during a rebuild? Is the write penalty of RAID6 worth the extra reliability over RAID10? Or will it be too slow with all the roles I am planning, therefore RAID10 is my only real option? The reason for the needed redundancy is I am the only technician and I'm not always on-site. Options I've considered: 1) 5 drives in RAID6 set, 200gb for host OS, rest for VM storage. 1 drive for hot swap - this is how it is currently setup 2) 4 drives in RAID10 set, 200gb for host OS, rest for VM storage. 2 drives for hot swap 3) 4 drives in RAID10 set for VM storage, 2 drives in RAID1 set for host OS. No drives for hot swap - While this is probably the best option with the amount of drives I have, I don't like the idea of having no hot swap 4) 3 drives in RAID6 set for VM storage, 2 drives in RAID1 set for host OS. 1 drive for hot swap All options give us enough storage capacity for our files, etc. We don't have any budget for extra drives or extra hot swap HD chassis for the servers. We have about 70 clients and about 150 users. MAIN SERVER Intel Xeon 5520 @ 2.27 GHz (2 processors) 16GB RAM 6 x 1TB Seagate Barracuda ES.2 Enterprise SATA drives Intel SRCSATAWB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: DC01 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM DC02 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM Member Server - DHCP server, File server, Print server - 1GB RAM SCCM Member Server - 4GB RAM Third Party Software Member Server - A/V server, Ticketing software, etc - 4GB RAM Exchange 2007 - 4GB RAM - however we are probably migrating to a hosted solution, therefore freeing up resources BACKUP SERVER Intel Xeon E5410 @ 2.33GHz (2 processors) 16GB RAM 6 x 2TB WD RE4 SATA drives Intel SRCSASRB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: AppAssure backup software - 8GB RAM

  Read the article

• SMBfs mounting OK, listing OK, Read KO, smbclient OK

  - by Kwaio

  I've tried to make the title the most meaningfull I could but it still looks ugly. The premises. We are using RHEL3-U8 as OS on most servers here, don't ask me why or suggest to upgrade, it's not on today's schedule. That means kernel used is 2.4.21 I have no access to the remote server, but I know it is a netApp NAS rack. $> smbclient --version Version 3.0.9-1.3E.9 Here is the /etc/fstab line : //NASHOSTNAME/share /mnt/mydir smbfs ro,uid=123,gid=123,workgroup=XXXX,credentials=/somefile 0 0 Here is the following mount output line //NASHOSTNAME/share on /mnt/mydir type smbfs (0) The symptoms. I can list the share without problems, even cd in there. The issue appears if I try to read any file : $> cat /mnt/mydir/fileX.txt cat: /mnt/mydir/fileX.txt: Input/output error In the system logs (/var/log/kernel for example) the following errors appear. Jul 30 15:40:02 hostname kernel: smb_errno: class ERRHRD, code 31 from command 0x2 Jul 30 15:40:02 hostname kernel: smb_errno: class ERRHRD, code 31 from command 0x2 Jul 30 15:40:02 hostname kernel: smb_open: fileX.txt open failed, result=-5 Jul 30 15:40:02 hostname kernel: smb_errno: class ERRHRD, code 31 from command 0x2 Jul 30 15:40:02 hostname kernel: smb_errno: class ERRHRD, code 31 from command 0x2 Jul 30 15:40:02 hostname kernel: smb_open: fileX.txt open failed, result=-5 Jul 30 15:40:02 hostname kernel: smb_readpage_sync: fileX.txt open failed, error=-5 The ERRHRD code 0x001F error is "General hardware failure" although it seems samba sometimes uses it for a different purpose, see http://www.ubiqx.org/cifs/SMB.html [Strange behaviour Alert] Additionnal informations : There is another SMB mountpoint on the system pointing to a (linux) host using samba and this one works. What I have tried. I have tried adding debug=4 to the mounting options and remounting the share and the logs still look the same. I have tried to mount the share with smbclient and I am able to fetch files with the get command. Both targets are in the same subnet, so network problem should be out, even if the LAN goes through a VPN with optimizers, MTU has already been decreased to 1450. I can also mount the share through NFS but then the files are all root.root 700 and I need to read them with another user...

  Read the article

• Can I use one virtualbox disk for multiple machines?

  - by mxp

  I'm not sure what search term to use and skimming through the VirtualBox manual didn't help me either, so I ask my two questions here... My setup is this: PC with dual boot into Windows 7 and a Debian operating system (both 64bit). I've created a virtual machine (Kubuntu, 64bit) under Windows and put it's VDI file on a SMB share of my NAS. Then I created a VM under linux using the same settings for memory etc and assigned the existing VDI file to it. My idea was that I could use that virtual machine from Windows and Linux as well. (1) Is this generally something that should work without problems? I noticed that snapshots get me into trouble because they appear to be not visible from the other operating system: The snapshots I took after installing the guest system are not visible under Linux. That's why I shut down the VM after usage and not save its state while it's running. My current problem is this: I have used the VM under Windows first, then under Linux. Now it will only start on Linux. When trying this on Windows the guest OS detects some kind of hard disk error and fails to boot because it cannot mount its drive. Obviously the virtual hard disk won't fail so it must have something to do with me using it under Linux. (2) How can I fix that? Update: It also looks like any changes I made in the VM under Linux have been reset by trying to boot it under Windows. Looks like it's back to the latest snapshot. I'm confused... Update The answer to my first question can be found below. In short: It works, as long as you don't use snapshots. The answer to my second question is this: Under Windows set the VM back to the latest snapshot and then discard the snapshot so it gets merged. There should be no snapshots left at the end. If you have multiple snapshots, discard the earliest ones first (Snapshot 1, then 2, 3, ...). I'm not sure what happens if you start at the end (.., 3, 2, 1). This of course leads to some data loss since you revert all changes since the last snapshot. But at least the VM is usable again.

  Read the article

• Computer Networks UNISA - Chap 14 &ndash; Insuring Integrity &amp; Availability

  - by MarkPearl

  After reading this section you should be able to Identify the characteristics of a network that keep data safe from loss or damage Protect an enterprise-wide network from viruses Explain network and system level fault tolerance techniques Discuss issues related to network backup and recovery strategies Describe the components of a useful disaster recovery plan and the options for disaster contingencies What are integrity and availability? Integrity – the soundness of a networks programs, data, services, devices, and connections Availability – How consistently and reliably a file or system can be accessed by authorized personnel A number of phenomena can compromise both integrity and availability including… security breaches natural disasters malicious intruders power flaws human error users etc Although you cannot predict every type of vulnerability, you can take measures to guard against the most damaging events. The following are some guidelines… Allow only network administrators to create or modify NOS and application system users. Monitor the network for unauthorized access or changes Record authorized system changes in a change management system’ Install redundant components Perform regular health checks on the network Check system performance, error logs, and the system log book regularly Keep backups Implement and enforce security and disaster recovery policies These are just some of the basics… Malware Malware refers to any program or piece of code designed to intrude upon or harm a system or its resources. Types of Malware… Boot sector viruses Macro viruses File infector viruses Worms Trojan Horse Network Viruses Bots Malware characteristics Some common characteristics of Malware include… Encryption Stealth Polymorphism Time dependence Malware Protection There are various tools available to protect you from malware called anti-malware software. These monitor your system for indications that a program is performing potential malware operations. A number of techniques are used to detect malware including… Signature Scanning Integrity Checking Monitoring unexpected file changes or virus like behaviours It is important to decide where anti-malware tools will be installed and find a balance between performance and protection. There are several general purpose malware policies that can be implemented to protect your network including… Every compute in an organization should be equipped with malware detection and cleaning software that regularly runs Users should not be allowed to alter or disable the anti-malware software Users should know what to do in case the anti-malware program detects a malware virus Users should be prohibited from installing any unauthorized software on their systems System wide alerts should be issued to network users notifying them if a serious malware virus has been detected. Fault Tolerance Besides guarding against malware, another key factor in maintaining the availability and integrity of data is fault tolerance. Fault tolerance is the ability for a system to continue performing despite an unexpected hardware or software malfunction. Fault tolerance can be realized in varying degrees, the optimal level of fault tolerance for a system depends on how critical its services and files are to productivity. Generally the more fault tolerant the system, the more expensive it is. The following describe some of the areas that need to be considered for fault tolerance. Environment (Temperature and humidity) Power Topology and Connectivity Servers Storage Power Typical power flaws include Surges – a brief increase in voltage due to lightening strikes, solar flares or some idiot at City Power Noise – Fluctuation in voltage levels caused by other devices on the network or electromagnetic interference Brownout – A sag in voltage for just a moment Blackout – A complete power loss The are various alternate power sources to consider including UPS’s and Generators. UPS’s are found in two categories… Standby UPS – provides continuous power when mains goes down (brief period of switching over) Online UPS – is online all the time and the device receives power from the UPS all the time (the UPS is charged continuously) Servers There are various techniques for fault tolerance with servers. Server mirroring is an option where one device or component duplicates the activities of another. It is generally an expensive process. Clustering is a fault tolerance technique that links multiple servers together to appear as a single server. They share processing and storage responsibilities and if one unit in the cluster goes down, another unit can be brought in to replace it. Storage There are various techniques available including the following… RAID Arrays NAS (Storage (Network Attached Storage) SANs (Storage Area Networks) Data Backup A backup is a copy of data or program files created for archiving or safekeeping. Many different options for backups exist with various media including… These vary in cost and speed. Optical Media Tape Backup External Disk Drives Network Backups Backup Strategy After selecting the appropriate tool for performing your servers backup, devise a backup strategy to guide you through performing reliable backups that provide maximum data protection. Questions that should be answered include… What data must be backed up At what time of day or night will the backups occur How will you verify the accuracy of the backups Where and for how long will backup media be stored Who will take responsibility for ensuring that backups occurred How long will you save backups Where will backup and recovery documentation be stored Different backup methods provide varying levels of certainty and corresponding labour cost. There are also different ways to determine which files should be backed up including… Full backup – all data on all servers is copied to storage media Incremental backup – Only data that has changed since the last full or incremental backup is copied to a storage medium Differential backup – Only data that has changed since the last backup is coped to a storage medium Disaster Recovery Disaster recovery is the process of restoring your critical functionality and data after an enterprise wide outage has occurred. A disaster recovery plan is for extreme scenarios (i.e. fire, line fault, etc). A cold site is a place were the computers, devices, and connectivity necessary to rebuild a network exist but they are not appropriately configured. A warm site is a place where the computers, devices, and connectivity necessary to rebuild a network exists with some appropriately configured devices. A hot site is a place where the computers, devices, and connectivity necessary to rebuild a network exists and all are appropriately configured.

  Read the article

< Previous Page | 23 24 25 26 27 28  | Next Page >