Search Results

Search found 5180 results on 208 pages for 'outside'.

Page 27/208 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• PPTP pass through on Cisco ASA 5505 (8.2)

  - by ITGuy24

  Is it possible to setup PPTP VPN traffic (clients outside and server inside) to passthrough a Cisco ASA 5505 if the outside IP address is also being used for PAT? The Cisco examples forward all NAT traffic from the outside to the inside VPN server. I only have one IP available currently and need PAT.

  Read the article

• ASA 5505 VPN setup. VPN works but still unable to reach devices in the inside network.

  - by chickenloop

  I've setup a Remote Access VPN on my Cisco ASA 5505. I'm able to connect to my ASA via my phone or the Cisco client, but I'm unable to reach devices in my inside LAN when connected via VPN. The setup is the following: Inside Network : 10.0.0.0/24 VPN_POOL: 172.16.0.0/24 Outside Network: 192.168.1.0/24 ASA is not the perimeter router, there is another device on the 192.168.1.0/24 network which is connected to my cable provider. Obviously UDP port 500 and 4500 are forwarded to the ASA's outside interface. Everything works perfectly, besides the VPN stuff. Config: interface Vlan1 nameif inside security-level 100 ip address 10.0.0.254 255.255.255.0 interface Vlan2 description Outside Interface nameif outside security-level 0 address 192.168.1.254 255.255.255.0 object network VPNPOOL subnet 172.16.0.0 255.255.255.0 object network INSIDE_LAN subnet 10.0.0.0 255.255.255.0 Then the exempt NAT rule. nat (inside,outside) source static INSIDE_LAN INSIDE_LAN destination static VPNPOOL VPNPOOL I don't think that the problem is with the VPN config, as I can successfully establish the VPN connection, but just in case I post it here: group-policy ZSOCA_ASA internal group-policy ZSOCA_ASA attributes vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel default-domain value default.domain.invalid tunnel-group ZSOCA_ASA type remote-access tunnel-group ZSOCA_ASA general-attributes address-pool VPNPOOL default-group-policy ZSOCA_ASA tunnel-group ZSOCA_ASA ipsec-attributes ikev1 pre-shared-key ***** Any ideas are welcome. Regards.

  Read the article

• Engineers are using explosives to remove hard rock outside our office building. What countermeasures should we take?

  - by Karrax

  Our building is located approx. 100 meters from the explosive charges. They happen several times per day, and really shake the entire building a lot. This is going to go on for many days and the blasts are supposed to get stronger. Our server rooms are nothing fancy; one of them has all the racks on hard concrete while the other one has a raised floor (the one which allows the cables to go beneath it). Does anyone have any tips, countermeasures or best practices for us? Currently we are thinking of the following countermeasures: Daily report of the server rooms status lights (HD lights, power supplies and so on). Nightly check disk scan on the most important servers Order in extra supply of spare harddrives Edit: Many good answers here! However one needs to be accepted. The highest voted answer at the time of this edit will get their answer accepted.

  Read the article

• Red Gate does Byte Night 2012

  - by red(at)work

  On the 5th of October 2012, a team of nine plucky Red Gaters braved the howling wind and the driving rain to sleep outside. No tents or mattresses were allowed – all we took for protection were sleeping bags, groundsheets, plastic sacks and Colin’s enormous fishing umbrella (a godsend in umbrella-y disguise). Why would we do such a thing? For Byte Night, an annual tech sector sleepout in support of Action for Children, who tackle the causes as well as the consequences of youth homelessness. Byte Night encourages technology professionals to do for one night a year what thousands of young people have to do every night – sleep rough.  We signed up for Byte Night in the warm, heady midst of the British summer, thinking it couldn’t possibly be all that bad. Even on the night itself – before the rain began to fall, sat in the comfort and warmth of a company canteen, drinking wine and eating chill and preparing to win the pub quiz – we were excited and optimistic about the night that lay ahead of us. All of that changed as soon as we stepped out into one of the worst rainstorms of the year. Brian, the team’s birthday boy, describes it best: Picture the scene: it’s 3 am on a Friday. I’m lying outside, fully clothed in a sleeping bag, wearing a raincoat, trussed up inside a large plastic pocket, on a ground sheet beneath a giant umbrella, wedged so tightly between two of my colleagues that I can’t move my arms. I’m wide awake, staring up at the grey sky beyond the edge of the umbrella; a limp, flickering white glow hints at a moon somewhere behind the drifting clouds. I haven’t slept since we first moved outside at 11 pm. Outside. Did I mention we were outside? I’m hung over. I need the loo. But there is no way on earth that I’m getting out of this sleeping bag. It’s cold. It’s raining. Not just raining, but chucking it down. It’s been doing this non-stop since 10pm. The rain sounds like a hyperactive drummer on the fishing umbrella, and the noise is loud and relentless. Puddles of water are forming all over the groundsheet, and, despite being ensconced inside the plastic pouch, I am wet. The fishing umbrella is protecting me from the worst of the driving rain, but not all of me is under it, and five hours of rain is no match for it. Everything is wet. My left side has become horribly damp. My trainers, which I placed next to my sleeping bag, are now completely soaked through. Mmm. That’ll be fun in the morning. My head is next to Colin’s head on one side, and a multi-pack of McCoy’s cheddar and onion crisps on the other. Don’t ask about the tub of hummus. That’s somewhere down by my ankles, abandoned to the night. Jess, who is lying next to me, rolls over onto her side. A mini waterfall cascades from her rain-pouch onto my face. Bah. I continue to stare into the heavens, willing the dawn to hurry up. Something lands on my face. It’s a mosquito. Great. Midnight, when this still seemed like fun – when we opened some champagne and my colleagues presented me with a caterpillar birthday cake, when everyone was drunk and jolly and full of stoic resolve – feels like a long time ago. Did I mention that today is my birthday? The remains of the caterpillar cake endure the same fate as the hummus, left out in the rain like a metaphor for sadness. It’s getting colder. I can see my breath. Silence has descended on the group, apart from the rustle of plastic. And the rain, obviously. Someone snores, and I envy whoever it is the sweet escape of sleep. I try to wriggle a bit further down inside my sleeping bag, but it doesn’t want to be wriggled into. Only 3 hours till dawn. 180 minutes. I begin to count them off, one at a time.  All nine of us got to go home in the morning, but thousands of children across the UK don’t have that luxury. If you’d like to sponsor the Red Gate Byte Night team, our JustGiving page can be found here.   Chris, before the outside bit actually happened. More photos from Byte Night Cambridge 2012 can be found here.

  Read the article

• DirectX9 dynamic rendering

  - by gardian06

  What I am planning to do is have the models (or maybe just an identifier for the model to be used) stored outside of the directX9 framework, and so in nature have completely dynamic rendering. All of the information that I have found contains static rendering (rendering models that are stored in memory at specific positions) I would like information on how to take a model (or identifier for a model type) that is stored outside of the framework, and render it to the screen. I am expected to take a container that holds all the relevant data to be rendered. The information outside would hold the position, orientation (quaternion, though I am told that I can also get a rotation matrix if I prefer), and dimensions (scale)

  Read the article

• Getting out of my head

  - by BenCole

  (I put this on SO, but it got a couple close votes saying it belonged here instead...) I've spent the last year as a single person team developing a rich-client application (35,000+ LoC, for what it's worth). It's currently stable and in production. However, I know that my skills were rusty at the beginning of the project, so without a doubt there are major issues to the code. At this point, most of the issues are in architecture, structure, or interactions - the easy problems, even architecture/design problems, have already been weeded out. Unfortunately, I've spent so much time with this project that I'm having a hard time thinking outside of it - approaching it from a new perspective to see the flaws deeply buried or inherent in the design. How do I step outside my head and outside my code so I can get a fresh look at this code so I can make it better? Is this less of an issue than I think it is, or is this a problem for other people as well?

  Read the article

• Ubuntu KVM Networking

  - by Guest

  I have two VMs ( linux based VM ) running on a UBUNTU/QEMU KVM. I am looking at a simple networking model, where in the VMs have public address and need to talk to the outside world and the outside world should be able to talk to the VMs as well. I did this Created a bridge with A.B.C.D/16 ( class B address ) eth2 is part of the brige with A.B.C.E /32 host address VM's interface ( through TAP ) has A.B.C.F / 16 address eth2 and VM interface are both part of the bridge. Now however, I am unable to ping these address from the outside world. If i remove eth2 from the bridge, I am able to ping the eth2. Please let me know what is going on. Guest

  Read the article

• PASS: International Travels

  - by Bill Graziano

  Nihao!  One of the largest changes PASS is going through is the the expansion outside the US and Canada.  We’ve had international chapters and events in Europe since the early 2000’s.  But nothing on the scale we’re seeing now.  Since January 1st there have been 18 SQL Saturday events outside North America and 19 events in North America.  We hope to have three international SQLRally events outside the US in FY13 (budget willing).  I don’t know the exact percentage of chapters outside the US but it’s got be 50% or higher. We recently started an effort to remake the Board to better reflect the growing global face of PASS.  This involves assigning some Board seats to geographic regions.  You can ask questions about this in our feedback forum, participate in a Twitter chat or ask questions directly of Board members.  You can email me at if you’d like to ask a question directly.  We’re doing this very slowly and deliberately in hopes that a long communication cycle gives us a chance to address all the issues that our members will raise. After the Summit we passed a budget exception allocating an extra $20,000 for Board members to travel to local events.  I think it’s important for Board members to visit new areas and talk to more of our members.  I sent out an email asking where people had attended events outside their home city.  Here’s the list I got back: Albuquerque, Amsterdam, Boston, Brisbane, Chicago, Colorado Springs, Columbus, Dallas, Houston, Jacksonville, Las Vegas, London, Louisville, Minneapolis, New York City, Orange County, Orlando, Pensacola, Perth, Philadelphia, Phoenix, Redmond, Seattle, Silicon Valley, Sydney, Tampa Bay, Vancouver, Washington DC and Wellington.  (Disclaimer: Some of this travel was paid for by employers or Board members themselves.  Some of this travel may have been completed before the Summit.  That’s still one heck of a list!) The last SQL Saturday event this fiscal year is SQL Saturday Shanghai.  And that’s one I’m attending.  This is our first event in China and is being put on in cooperation with the local Microsoft office.  Hopefully this event will be the start of a growing community in China that includes chapters, SQL Saturdays and maybe a SQLRally or two in the future.  I’m excited to speak with people that are just starting down this path and watching this community grow. I encourage you to visit the PASS Global Growth site and read through the material there.  This is the biggest change we’ve made to our governance since I’ve been on the Board.  You need to understand how it affects you and how it affects the organization. And wish me luck on the 15 hour flight to Shanghai on Friday afternoon.  Rob Farley flies from Australia to the US for PASS events multiple times per year and I don’t know how he does it so often.  I think one of these is going to wipe me out.  (And Nihao (knee-how) is Chinese for Hello.)

  Read the article

• Can a Silverlight application authenticate versus a local LDAP/ActiveDirectory Server

  - by caryden

  If I have an externally hosted application (www.outside.com) outside the firewall but users within a company wanted to be able to enable LDAP authentication against their local (behind the firewall) AD server (acting as LDAP) or other LDAP server (call it ldap.inside.com), how would this be done. It seems technically possible in that when a user tried to login to outside.com through a client-side silverlight interface, that the SL app could connect to the outside.com login service and be told to authenticate that user against ldap.inside.com. The SL app would make the calls to ldap.inside.com to authenticate the user. Of course, there is the issue of how the server is notified securely that the client authenticated itself...Has anyone done this?

  Read the article

• Get ahold of session in command object in Grails

  - by UltraVi01

  How can I get the session from within a command object? I have tried: import org.springframework.security.context.SecurityContextHolder as SCH class MyCommand { def session = RCH.currentRequestAttributes().getSession() } This throws java.lang.IllegalStateException: No thread-bound request found: Are you referring to request attributes outside of an actual web request, or processing a request outside of the originally receiving thread? If you are actually operating within a web request and still receive this message, your code is probably running outside of DispatcherServlet/DispatcherPortlet: In this case, use RequestContextListener or RequestContextFilter to expose the current request.

  Read the article

• GLSL point inside box test

  - by wcochran

  Below is a GLSL fragment shader that outputs a texel if the given texture coord is inside a box, otherwise a color is output. This just feels silly and the there must be a way to do this without branching? uniform sampler2D texUnit; varying vec4 color; varying vec2 texCoord; void main() { vec4 texel = texture2D(texUnit, texCoord); if (any(lessThan(texCoord, vec2(0.0, 0.0))) || any(greaterThan(texCoord, vec2(1.0, 1.0)))) gl_FragColor = color; else gl_FragColor = texel; } Below is a version without branching, but it still feels clumsy. What is the best practice for "texture coord clamping"? uniform sampler2D texUnit; varying vec4 color; varying vec4 labelColor; varying vec2 texCoord; void main() { vec4 texel = texture2D(texUnit, texCoord); bool outside = any(lessThan(texCoord, vec2(0.0, 0.0))) || any(greaterThan(texCoord, vec2(1.0, 1.0))); gl_FragColor = mix(texel*labelColor, color, vec4(outside,outside,outside,outside)); } I am clamping texels to the region with the label is -- the texture s & t coordinates will be between 0 and 1 in this case. Otherwise, I use a brown color where the label ain't. Note that I could also construct a branching version of the code that does not perform a texture lookup when it doesn't need to. Would this be faster than a non-branching version that always performed a texture lookup? Maybe time for some tests...

  Read the article

• How can I get penetration depth from Minkowski Portal Refinement / Xenocollide?

  - by Raven Dreamer

  I recently got an implementation of Minkowski Portal Refinement (MPR) successfully detecting collision. Even better, my implementation returns a good estimate (local minimum) direction for the minimum penetration depth. So I took a stab at adjusting the algorithm to return the penetration depth in an arbitrary direction, and was modestly successful - my altered method works splendidly for face-edge collision resolution! What it doesn't currently do, is correctly provide the minimum penetration depth for edge-edge scenarios, such as the case on the right: What I perceive to be happening, is that my current method returns the minimum penetration depth to the nearest vertex - which works fine when the collision is actually occurring on the plane of that vertex, but not when the collision happens along an edge. Is there a way I can alter my method to return the penetration depth to the point of collision, rather than the nearest vertex? Here's the method that's supposed to return the minimum penetration distance along a specific direction: public static Vector3 CalcMinDistance(List<Vector3> shape1, List<Vector3> shape2, Vector3 dir) { //holding variables Vector3 n = Vector3.zero; Vector3 swap = Vector3.zero; // v0 = center of Minkowski sum v0 = Vector3.zero; // Avoid case where centers overlap -- any direction is fine in this case //if (v0 == Vector3.zero) return Vector3.zero; //always pass in a valid direction. // v1 = support in direction of origin n = -dir; //get the differnce of the minkowski sum Vector3 v11 = GetSupport(shape1, -n); Vector3 v12 = GetSupport(shape2, n); v1 = v12 - v11; //if the support point is not in the direction of the origin if (v1.Dot(n) <= 0) { //Debug.Log("Could find no points this direction"); return Vector3.zero; } // v2 - support perpendicular to v1,v0 n = v1.Cross(v0); if (n == Vector3.zero) { //v1 and v0 are parallel, which means //the direction leads directly to an endpoint n = v1 - v0; //shortest distance is just n //Debug.Log("2 point return"); return n; } //get the new support point Vector3 v21 = GetSupport(shape1, -n); Vector3 v22 = GetSupport(shape2, n); v2 = v22 - v21; if (v2.Dot(n) <= 0) { //can't reach the origin in this direction, ergo, no collision //Debug.Log("Could not reach edge?"); return Vector2.zero; } // Determine whether origin is on + or - side of plane (v1,v0,v2) //tests linesegments v0v1 and v0v2 n = (v1 - v0).Cross(v2 - v0); float dist = n.Dot(v0); // If the origin is on the - side of the plane, reverse the direction of the plane if (dist > 0) { //swap the winding order of v1 and v2 swap = v1; v1 = v2; v2 = swap; //swap the winding order of v11 and v12 swap = v12; v12 = v11; v11 = swap; //swap the winding order of v11 and v12 swap = v22; v22 = v21; v21 = swap; //and swap the plane normal n = -n; } /// // Phase One: Identify a portal while (true) { // Obtain the support point in a direction perpendicular to the existing plane // Note: This point is guaranteed to lie off the plane Vector3 v31 = GetSupport(shape1, -n); Vector3 v32 = GetSupport(shape2, n); v3 = v32 - v31; if (v3.Dot(n) <= 0) { //can't enclose the origin within our tetrahedron //Debug.Log("Could not reach edge after portal?"); return Vector3.zero; } // If origin is outside (v1,v0,v3), then eliminate v2 and loop if (v1.Cross(v3).Dot(v0) < 0) { //failed to enclose the origin, adjust points; v2 = v3; v21 = v31; v22 = v32; n = (v1 - v0).Cross(v3 - v0); continue; } // If origin is outside (v3,v0,v2), then eliminate v1 and loop if (v3.Cross(v2).Dot(v0) < 0) { //failed to enclose the origin, adjust points; v1 = v3; v11 = v31; v12 = v32; n = (v3 - v0).Cross(v2 - v0); continue; } bool hit = false; /// // Phase Two: Refine the portal int phase2 = 0; // We are now inside of a wedge... while (phase2 < 20) { phase2++; // Compute normal of the wedge face n = (v2 - v1).Cross(v3 - v1); n.Normalize(); // Compute distance from origin to wedge face float d = n.Dot(v1); // If the origin is inside the wedge, we have a hit if (d > 0 ) { //Debug.Log("Do plane test here"); float T = n.Dot(v2) / n.Dot(dir); Vector3 pointInPlane = (dir * T); return pointInPlane; } // Find the support point in the direction of the wedge face Vector3 v41 = GetSupport(shape1, -n); Vector3 v42 = GetSupport(shape2, n); v4 = v42 - v41; float delta = (v4 - v3).Dot(n); float separation = -(v4.Dot(n)); if (delta <= kCollideEpsilon || separation >= 0) { //Debug.Log("Non-convergance detected"); //Debug.Log("Do plane test here"); return Vector3.zero; } // Compute the tetrahedron dividing face (v4,v0,v1) float d1 = v4.Cross(v1).Dot(v0); // Compute the tetrahedron dividing face (v4,v0,v2) float d2 = v4.Cross(v2).Dot(v0); // Compute the tetrahedron dividing face (v4,v0,v3) float d3 = v4.Cross(v3).Dot(v0); if (d1 < 0) { if (d2 < 0) { // Inside d1 & inside d2 ==> eliminate v1 v1 = v4; v11 = v41; v12 = v42; } else { // Inside d1 & outside d2 ==> eliminate v3 v3 = v4; v31 = v41; v32 = v42; } } else { if (d3 < 0) { // Outside d1 & inside d3 ==> eliminate v2 v2 = v4; v21 = v41; v22 = v42; } else { // Outside d1 & outside d3 ==> eliminate v1 v1 = v4; v11 = v41; v12 = v42; } } } return Vector3.zero; } }

  Read the article

• How to download Games

  - by Gaurav Butola

  I have a download limit in my home PC so cannot download games from my home. Can you recommend few games that comes in a .deb package so that I can download them outside and bring them home to download. Games like Max Payne or NFS (not exactly Max payn or NFS) for ubuntu. which I can download as .deb but not synaptic, as I have mentioned that I would download them outside my home and bring the deb home. thanks

  Read the article

• Lock a partition to a few folders

  - by Oxwivi

  I want to have a few folders on a partition whose contents I can freely edit, but outside nothing should be saved. Specifically, I want the folders in my Home (Documents, Music, etc) on a different partition, but rest of the normally hidden folders remain in the main partition with Ubuntu. I can make the files within the Home folders save in another partition using fstab binding, but I still can't think of how to lock the partition from edits outside those folders. I'm open to suggestions of alternatives to binding - but please, no symbolic links.

  Read the article

• Programming Language, Turing Completeness and Turing Machine

  - by Amumu

  A programming language is said to be Turing Completeness if it can successfully simulate a universal TM. Let's take functional programming language for example. In functional programming, function has highest priority over anything. You can pass functions around like any primitives or objects. This is called first class function. In functional programming, your function does not produce side effect i.e. output strings onto screen, change the state of variables outside of its scope. Each function has a copy of its own objects if the objects are passed from the outside, and the copied objects are returned once the function finishes its job. Each function written purely in functional style is completely independent to anything outside of it. Thus, the complexity of the overall system is reduced. This is referred as referential transparency. In functional programming, each function can have its local variables kept its values even after the function exits. This is done by the garbage collector. The value can be reused the next time the function is called again. This is called memoization. A function usually should solve only one thing. It should model only one algorithm to answer a problem. Do you think that a function in a functional language with above properties simulate a Turing Machines? Functions (= algorithms = Turing Machines) are able to be passed around as input and returned as output. TM also accepts and simulate other TMs Memoization models the set of states of a Turing Machine. The memorized variables can be used to determine states of a TM (i.e. which lines to execute, what behavior should it take in a give state ...). Also, you can use memoization to simulate your internal tape storage. In language like C/C++, when a function exits, you lose all of its internal data (unless you store it elsewhere outside of its scope). The set of symbols are the set of all strings in a programming language, which is the higher level and human-readable version of machine code (opcode) Start state is the beginning of the function. However, with memoization, start state can be determined by memoization or if you want, switch/if-else statement in imperative programming language. But then, you can't Final accepting state when the function returns a value, or rejects if an exception happens. Thus, the function (= algorithm = TM) is decidable. Otherwise, it's undecidable. I'm not sure about this. What do you think? Is my thinking true on all of this? The reason I bring function in functional programming because I think it's closer to the idea of TM. What experience with other programming languages do you have which make you feel the idea of TM and the ideas of Computer Science in general? Can you specify how you think?

  Read the article

• Oracle Application in DMZ (Demilitarized Zone)

  - by PRajkumar

   Business Needs Large Organizations want to expose their Oracle Application services outside their private network (HTTP/HTTPS and SSL). Usually these exposures must exist to promote external communication. So they want to separate an external network from directly referencing an internal network   Business Challenges ·         Business does not want to compromise with security information ·         Business cannot expose internal domain or internal URL information   Business Solution DMZ is the solution of this problem. In Oracle application we can achieve this by following way –   ·         Oracle Application consists of fleet nodes (FND_NODES) so first decide which node have to expose to public ·         To expose the node to public use the profile “Node Trust Level” ·         Set node to Public/Private (Normal -> private, External -> public) ·         Set "Responsibility Trust Level" profile to decide whether to expose Application Responsibility to inside or outside firewall         Solution Features   ·         Exposed web services can be accessed by both internal and external users ·         Configurable and can be very easily rolled out ·         Internal network and business data is secured from outside traffic ·         Unauthorized access to internal network from outside is prohibited ·         No need for VPN and Secure FTP server   Benefits  ·       Large Organizations having Oracle Application can expose their web services like (HTTP/HTTPS and SSL) to the internet without compromise with security information and without exposing their internal domain   Possible Week Points  ·         If external firewall is compromised, then external application server is also compromised, exposing an attack on E-Business Suite database ·         There’s nothing to prevent internal users from attacking internal application server, also exposing an attack on E-Business Suite database   Reference Links  ·         https://blogs.oracle.com/manojmadhusoodanan/tags/dmz

  Read the article

• Apache Virtual Hosts behind Cisco Router

  - by Theo

  I'm setting up an Apache 2.2 Ubuntu web server for internal services that is also supposed to be accessed from outside our LAN. Our LAN has a single external IP that is the external IP of our RV042 Cisco router. We have set up several A records on our external DNS server that point to this IP. Our internal DNS server resolve the same records to the internal IP of our web server, so computers from inside the network can access them using the same address as if they were outside. We forwarded the router's external 80 port to our web server's 80 port. I have set up one Virtual Host for each domain name in our list, and my httpd.conf is something like this: ServerName web.domain.com NameVirtualHost *:80 <VirtualHost *:80> ServerName alfresco.domain.com <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /alfresco http://localhost:8080/alfresco ProxyPassReverse /alfresco http://localhost:8080/alfresco ProxyPass /share http://localhost:8080/share ProxyPassReverse /share http://localhost:8080/share </VirtualHost> <VirtualHost *:80> ServerName crm.domain.com DocumentRoot /var/www/sugarcrm </VirtualHost> Now, this works if we are in our LAN. However, if we are outside of our LAN we reach our web server's default page saying: It Works! This is the default web page for this server. But we can't reach the virtual hosts, as if the domain name is not being preserved when the router forward the packets to the web server. Am I doing something wrong? How can I check what is going on? What should be the settings to make this work from outside?

  Read the article

• cisco asa + action drop issue

  - by ghp

  Have created a tunnel between 10.x.y.z network and 122.a.b.c ..the tunnel is up and active, but when I try the packet tracer output ..I get the ACTION as drop. I have also enabled same-security-traffic permit intra-interface. Can someone help me what does this drop mean? Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (acl-drop) Flow is denied by configured rule Packet Tracer output @Shane Madden: please find below the packet tracer output. CASA5K-A# CASA5K-A# config t CASA5K-A(config)# packet-tracer input inside tcp 10.x.y.112 0 122.a.b.c 0 Phase: 1 Type: ROUTE-LOOKUP Subtype: input Result: ALLOW Config: Additional Information: in 0.0.0.0 0.0.0.0 outside Phase: 2 Type: ACCESS-LIST Subtype: Result: DROP Config: Implicit Rule Additional Information: Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (acl-drop) Flow is denied by configured rule CASA5K-A(config)# ======================================================================== The access-group are as follows : access-group acl-inbound in interface outside access-group acl-outbound in interface inside and the access-list's are access-list acl-inbound extended permit tcp any any gt 1023 access-list acl-outbound extended permit ip object-group net-Source object net-dest

  Read the article

• Breaking up the Workday– Overcoming the Workaholic Syndrome

  - by dwahlin

  Hi, my name’s Dan Wahlin and I’m a workaholic – I admit it. It’s good from the standpoint that I get a lot done but it also has a lot of cons associated with it as well that I’m not proud of. I literally can’t watch TV without feeling like I should be doing something more productive (although I have no problem going to see movies at a theater or watching sporting events – that’s my escape I guess). On vacation it’s sometimes difficult the first few days to just “let go” of work and enjoy the time with my family. I always feel like I should be checking email and following up with different business projects. Fortunately, my wife knows me really well after 17 years of marriage and “gently” restricts my usage of laptops and other gadgets while we’re out. She also reminds me that constantly burying my face in gadgets just isn’t cool and shows a distinct lack of self control. On a given day I typically put in between 12 (at a minimum) up to 16-18 hours working on projects. My company does .NET consulting (ASP.NET/jQuery, SharePoint and Silverlight) but we also do a lot in the training space so there’s always a client project, some new courseware or some other deliverable that has to be worked on. My normal process for handling that is to just work my butt off and see how much I can get done. That process has worked well for a long time but when you start realizing that your happiness comes from how much work you accomplished that day then you have a problem. That’s especially true if you have kids (which I do….two awesome boys). It’s almost as if working more hours feels like I’m more successful or something which is of course ridiculous. It may actually mean that I’m too distracted or disorganized. Lately I’ve realized that while I’m still productive and always meet my deadlines, I’m really burnt out by the afternoon and have lost some of the excitement I used to have. Part of that’s normal I think given that I’ve been doing this for close to 15 years now, but in thinking through it more I realized that I just need to get away from the desk and take a break. By far, the happiest time of my life was my childhood. Part of that was due to having awesome parents, having far less responsibility (a big factor I suspect), being able to hang-out with friends at school, playing sports, games, etc. but I think a big part of the overall happiness came from being outside a lot. I lived on my bike as a little kid and as I grew up I shared time between riding an ATV all over the place, shooting hoops on the basketball court, playing golf and working on a golf course (all outside work of course).  Being a software developer and trainer I generally spend 95% or more of my day indoors and only see the sun when driving from place to place or by looking out the window (that’s sad because I live in a suburb of Phoenix, AZ where it’s nearly always sunny). I haven’t looked into any scientific studies on the matter, but I’d be willing to bet there’s a direct correlation between overall productivity/happiness and being outside some throughout the day (sunny or not). But, I wasn’t sure what to do about it since I do have a lot of deadlines I need to meet after all. While talking with my wife last night I mentioned how I feel like I’m in a rut and want to get the “fun” back that I used to have. She immediately said that I need to start making time for breaks (a real quick fact – she’s a lot smarter than me and nearly always right). Of course my first thought was that I’d be less productive taking breaks. If I spend 2 hours just relaxing then I’m losing 2 hours of work. But, I thought about it more and realized that I’m probably less productive when I work 10+ hours and only take less than 30 minutes for a lunch break to relax a little. I bet my brain is screaming, “Please let me relax a little so I can figure out these problems you’re trying to resolve!”. So, starting today I’m going to try to break the workaholic habit and spend time outside of the office. That could mean sitting around outside, working out, golfing, or whatever. I’ve decided that no gadgets are allowed during that time and that I shouldn’t work for more than 4 hours straight without taking a break. I have no idea how my little “break the workaholic syndrome” experiment will go or how long it will last, but I’d be very interested in hearing from others on how they keep fresh and focused without working yourself to death. If you have any specific ideas, techniques or practices you follow please share them. There’s a lot more to life than work and some of us (and I’m thinking of myself specifically) need to take a long, hard look at what kind of balance we currently have. I’d hate to look back at my life when I’m 80 years old and say, “The only thing I did was work – I missed out on life!”.

  Read the article

• Web server behind MikroTik and dynamic dns

  - by danielrvt

  I recently purchased a MikroTik router, it works great! However, I haven't been able to make my web server work from outside my lan I'll explain better: I have two domains in my disposal, before I switched to Mikrotik, the were working perfectly and all my websites were online. Since I changed the router, every time I try to access my websites from outside my lan, my websites can't be found. I have my websites domains associated with a dynamic dns provider, I managed to create a port forwarding rule to redirect all my incoming traffic from port 80 to my web server, and it works, but only when I'm connected to my MikroTik router. Is there something else I have to do? PD: I also created a static dns rule in my router with my domains to associate it to my webserver (which is behind my router) PD2: All I want is to redirect requests from outside to my webserver...

  Read the article

• Dichroic Glass in Blender

  - by KalAurum

  I am trying to use blender to simulate the Lycurgus Cup. The cup is an example of dichroic (two-color) glass, and appears green when a light source is on the outside of the cup, and appears red when a light source is inside the cup. Here is an image of when light is outside and it appears green: Here is an image of when light is inside and it appears red: I have created a glass cup in blender. I have made the glass a red color, and then used the colorbands under the Object-Material/Shading-Ramps tab to add green specular and diffuse color. However, this makes the glass appear the same mix of red and green whether I put the light source on the inside or outside the cup. An example can be seen here: According to the second post here, someone was able to to fake the effect of a dichroic glass in blender rather easily through the use of a magic procedural texture but they provide no clues on how to do this (in blender). Does anyone know how to achieve this effect in blender?

  Read the article

• SharePoint Server 2007 Stops Responding to External Requests

  - by Mountain Deux

  We have a SharePoint2007 server running on a Windows Server 2003 Box. The box itself is quite old but has not experienced any weird issues. Recently SharePoint has begun to show some strange behavior. One of the most annoying things is that once in a while, the sharepoint sever stops responding to requests outside our network. Internally, you can still browse everything that has to do with sharepoint but outside, nothing. If i reset the server it will start responding again. I am just not sure what makes it stop responding to users on the outside in the first place. Resetting the WWW publishing service does no good.

  Read the article

• SFTP: file symlinks in a jailed (chrooted) directory

  - by Kevin Duke

  I'm trying to set up sftp so that a few trusted people can access/edit/create some files. I have jailed a user into their home directory (/home/name) but have run into a problem. I want for them to also be able to access other parts of the VPS because it is also a game server, webhost, etc, and I want for them to be able to have full control of files outside their jailed directory. I tried making a symlink (ln -s) to the desired directory but it does not work, as expected. I tried (cp -rl) to the files that I wanted to give access and it worked -- they can edit the files in their directory and it changes the one stored outside of jail. BUT they cannot create new files (they can but it won't update outside of jail). I know I'm probably not doing this the "right way" but what can I do to do what I want?

  Read the article

• Need IP port forwarding to access an internel service running on an internal machine

  - by appleluo

  I am trying to configure iptables to do port forwarding for certain request. The scenario is like this: Login node A can be accessed from outside Compute node B that running the service can be accessed from A but not from outside. I want to set up iptables so that a request for the service on B from outside can be accessed through A. A has two ethernet ports: Internal eth0, with ip internal_A and External eth1, with ip external_A. B has 1 ethernet port, internal eth0. let's say its ip is internal_B The service listens to internal_B:5900. We open external_A:10000 for user access. I configure my iptables with the following commands: echo 1> /proc/sys/net/ipv4/ip_forward /sbin/iptables -P FORWARD ACCEPT /sbin/iptables -t nat -A POSTROUTING -j MASQUERADE /sbin/iptables -A PREROUTING -p tcp -t nat --dport 10000 -j DNAT --to-destination interal_B:5900 /sbin/iptables -A OUTPUT -p tcp -t nat -d external_A --dport 10000 -j DNAT --to-destination internal_B:5900 But it didn't work. Can anybody help me?

  Read the article

• Re-streaming RTMP stream

  - by Yvan JANSSENS

  I have a set of local RTMP stream servers in my network, but I want them to be reachable outside. The bandwidth is too narrow to serve multiple clients on the streamservers of my network, so the idea is to pull the local RTMP streams on a computer serving as a gateway, which pushes them on his turn to a hosted streaming provider. It is not possible to let the sources of the stream push their stream directly to the server outside due to network policy restrictions. Scheme of what I'm trying to accomplish: Internal network | External network ------------ ------------ ----------------------- | internal | <---- | Gateway | ------> | streamserver outside| | streams | ------------ ----------------------- ------------ | ^ | | | ----------- | | clients | | ----------- My question now is: which application which can pull a live stream from an RTMP source (Flash Media Server) and push it to another one (Flash Media Server at hosting provider).

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >