Search Results

Search found 2560 results on 103 pages for 'revision counter'.

Page 27/103 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

  - by Andy Shinn

  I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate slots for the 2 chassis (the slots list twice and only go from 0 to 27). All the drives also show the same enclosure ID (ID 36). However, MegaCLI -encinfo lists the 2 enclosures correctly (ID 36 and ID 65). My question is, why would this happen? Is there an option I am missing to use 2 enclosures effectively? This is blocking me rebuilding a drive that failed in slot 11 since I can only specify enclosure and slot as parameters to replace a drive. When I do this, it picks the wrong slot 11 (device ID 46 instead of device ID 19). Adapter #1 is the LSI 9285-8e, adapter #0 (which I removed due to space limitations) is the onboard LSI. Adapter information: Adapter #1 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9285-8e Serial No : SV12704804 FW Package Build: 23.1.1-0004 Mfg. Data ================ Mfg. Date : 06/30/11 Rework Date : 00/00/00 Revision No : 00A Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.25.00_4.11.05.00_0x05040000 WebBIOS Version : 6.1-20-e_20-Rel Preboot CLI Version: 05.01-04:#%00001 FW Version : 3.140.15-1320 NVDATA Version : 2.1106.03-0051 Boot Block Version : 2.04.00.00-0001 BOOT Version : 06.253.57.219 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9285 Host Interface : PCIE ChipRevision : B0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 5003048000ee8e7f 1 5003048000ee8a7f 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b0038f9210 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Absent ROC temperature : 70 degree Celcius Settings ================ Current Time : 18:24:36 3/13, 2012 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 10 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 887 MB Device Present ================ Virtual Drives : 28 Degraded : 0 Offline : 0 Physical Devices : 59 Disks : 56 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : Yes Support PI : No Support Boot Time PFK Change : Yes Disable Online PFK Change : No PFK TrailTime Remaining : 0 days 0 hours Support Shield State : Yes Block SSD Write Disk Cache Change: Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : Don't Auto spin down Configured Drives Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : Yes Time taken to detect CME : 60s Exit Code: 0x00 Enclosure information: # /opt/MegaRAID/MegaCli/MegaCli64 -encinfo -a1 Number of enclosures on adapter 1 -- 3 Enclosure 0: Device ID : 36 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port B Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 65 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11820 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 48 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 1: Device ID : 65 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port A Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 36 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11760 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 47 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 2: Device ID : 252 Number of Slots : 8 Number of Power Supplies : 0 Number of Fans : 0 Number of Temperature Sensors : 0 Number of Alarms : 0 Number of SIM Modules : 1 Number of Physical Drives : 0 Status : Normal Position : 1 Connector Name : Unavailable Enclosure type : SGPIO Failed in first Inquiry commnad FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : Unavailable Inquiry data : Vendor Identification : LSI Product Identification : SGPIO Product Revision Level : N/A Vendor Specific : Exit Code: 0x00 Now, notice that each slot 11 device shows an enclosure ID of 36, I think this is where the discrepancy happens. One should be 36. But the other should be on enclosure 65. Drives in slot 11: Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 5, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 48 WWN: Sequence Number: 11 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : YES Device Firmware Level: A5C0 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8a53 Connected Port Number: 1(path0) Inquiry Data: MJ1311YNG6YYXAHitachi HDS5C3030ALA630 MEAOA5C0 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 19, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 19 WWN: Sequence Number: 4 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : NO Device Firmware Level: A580 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8e53 Connected Port Number: 0(path0) Inquiry Data: MJ1313YNG1VA5CHitachi HDS5C3030ALA630 MEAOA580 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Update 06/28/12: I finally have some new information about (what we think) the root cause of this problem so I thought I would share. After getting in contact with a very knowledgeable Supermicro tech, they provided us with a tool called Xflash (doesn't appear to be readily available on their FTP). When we gathered some information using this utility, my colleague found something very strange: root@mogile2 test]# ./xflash.dat -i get avail Initializing Interface. Expander: SAS2X36 (SAS2x36) 1) SAS2X36 (SAS2x36) (50030480:00EE917F) (0.0.0.0) 2) SAS2X36 (SAS2x36) (50030480:00E9D67F) (0.0.0.0) 3) SAS2X36 (SAS2x36) (50030480:0112D97F) (0.0.0.0) This lists the connected enclosures. You see the 3 connected (we have since added a 3rd and a 4th which is not yet showing up) with their respective SAS address / WWN (50030480:00EE917F). Now we can use this address to get information on the individual enclosures: [root@mogile2 test]# ./xflash.dat -i 5003048000EE917F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00EE917F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 5003048000E9D67F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00E9D67F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 500304800112D97F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:0112D97F Enclosure Logical Id: 50030480:0112D97F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 Did you catch it? The first 2 enclosures logical ID is partially masked out where the 3rd one (which has a correct unique enclosure ID) is not. We pointed this out to Supermicro and were able to confirm that this address is supposed to be set during manufacturing and there was a problem with a certain batch of these enclosures where the logical ID was not set. We believe that the RAID controller is determining the ID based on the logical ID and since our first 2 enclosures have the same logical ID, they get the same enclosure ID. We also confirmed that 0000007F is the default which comes from LSI as an ID. The next pointer that helps confirm this could be a manufacturing problem with a run of JBODs is the fact that all 6 of the enclosures that have this problem begin with 00E. I believe that between 00E8 and 00EE Supermicro forgot to program the logical IDs correctly and neglected to recall or fix the problem post production. Fortunately for us, there is a tool to manage the WWN and logical ID of the devices from Supermicro: ftp://ftp.supermicro.com/utility/ExpanderXtools_Lite/. Our next step is to schedule a shutdown of these JBODs (after data migration) and reprogram the logical ID and see if it solves the problem. Update 06/28/12 #2: I just discovered this FAQ at Supermicro while Google searching for "lsi 0000007f": http://www.supermicro.com/support/faqs/faq.cfm?faq=11805. I still don't understand why, in the last several times we contacted Supermicro, they would have never directed us to this article :\

  Read the article

• How to compile a C++ source code written for Linux/Unix on Windows Vista (code given)

  - by HTMZ

  I have a c++ source code that was written in linux/unix environment by some other author. It gives me errors when i compile it in windows vista environment. I am using Bloodshed Dev C++ v 4.9. please help. #include <iostream.h> #include <map> #include <vector> #include <string> #include <string.h> #include <strstream> #include <unistd.h> #include <stdlib.h> using namespace std; template <class T> class PrefixSpan { private: vector < vector <T> > transaction; vector < pair <T, unsigned int> > pattern; unsigned int minsup; unsigned int minpat; unsigned int maxpat; bool all; bool where; string delimiter; bool verbose; ostream *os; void report (vector <pair <unsigned int, int> > &projected) { if (minpat > pattern.size()) return; // print where & pattern if (where) { *os << "<pattern>" << endl; // what: if (all) { *os << "<freq>" << pattern[pattern.size()-1].second << "</freq>" << endl; *os << "<what>"; for (unsigned int i = 0; i < pattern.size(); i++) *os << (i ? " " : "") << pattern[i].first; } else { *os << "<what>"; for (unsigned int i = 0; i < pattern.size(); i++) *os << (i ? " " : "") << pattern[i].first << delimiter << pattern[i].second; } *os << "</what>" << endl; // where *os << "<where>"; for (unsigned int i = 0; i < projected.size(); i++) *os << (i ? " " : "") << projected[i].first; *os << "</where>" << endl; *os << "</pattern>" << endl; } else { // print found pattern only if (all) { *os << pattern[pattern.size()-1].second; for (unsigned int i = 0; i < pattern.size(); i++) *os << " " << pattern[i].first; } else { for (unsigned int i = 0; i < pattern.size(); i++) *os << (i ? " " : "") << pattern[i].first << delimiter << pattern[i].second; } *os << endl; } } void project (vector <pair <unsigned int, int> > &projected) { if (all) report(projected); map <T, vector <pair <unsigned int, int> > > counter; for (unsigned int i = 0; i < projected.size(); i++) { int pos = projected[i].second; unsigned int id = projected[i].first; unsigned int size = transaction[id].size(); map <T, int> tmp; for (unsigned int j = pos + 1; j < size; j++) { T item = transaction[id][j]; if (tmp.find (item) == tmp.end()) tmp[item] = j ; } for (map <T, int>::iterator k = tmp.begin(); k != tmp.end(); ++k) counter[k->first].push_back (make_pair <unsigned int, int> (id, k->second)); } for (map <T, vector <pair <unsigned int, int> > >::iterator l = counter.begin (); l != counter.end (); ) { if (l->second.size() < minsup) { map <T, vector <pair <unsigned int, int> > >::iterator tmp = l; tmp = l; ++tmp; counter.erase (l); l = tmp; } else { ++l; } } if (! all && counter.size () == 0) { report (projected); return; } for (map <T, vector <pair <unsigned int, int> > >::iterator l = counter.begin (); l != counter.end(); ++l) { if (pattern.size () < maxpat) { pattern.push_back (make_pair <T, unsigned int> (l->first, l->second.size())); project (l->second); pattern.erase (pattern.end()); } } } public: PrefixSpan (unsigned int _minsup = 1, unsigned int _minpat = 1, unsigned int _maxpat = 0xffffffff, bool _all = false, bool _where = false, string _delimiter = "/", bool _verbose = false): minsup(_minsup), minpat (_minpat), maxpat (_maxpat), all(_all), where(_where), delimiter (_delimiter), verbose (_verbose) {}; ~PrefixSpan () {}; istream& read (istream &is) { string line; vector <T> tmp; T item; while (getline (is, line)) { tmp.clear (); istrstream istrs ((char *)line.c_str()); while (istrs >> item) tmp.push_back (item); transaction.push_back (tmp); } return is; } ostream& run (ostream &_os) { os = &_os; if (verbose) *os << transaction.size() << endl; vector <pair <unsigned int, int> > root; for (unsigned int i = 0; i < transaction.size(); i++) root.push_back (make_pair (i, -1)); project (root); return *os; } void clear () { transaction.clear (); pattern.clear (); } }; int main (int argc, char **argv) { extern char *optarg; unsigned int minsup = 1; unsigned int minpat = 1; unsigned int maxpat = 0xffffffff; bool all = false; bool where = false; string delimiter = "/"; bool verbose = false; string type = "string"; int opt; while ((opt = getopt(argc, argv, "awvt:M:m:L:d:")) != -1) { switch(opt) { case 'a': all = true; break; case 'w': where = true; break; case 'v': verbose = true; break; case 'm': minsup = atoi (optarg); break; case 'M': minpat = atoi (optarg); break; case 'L': maxpat = atoi (optarg); break; case 't': type = string (optarg); break; case 'd': delimiter = string (optarg); break; default: cout << "Usage: " << argv[0] << " [-m minsup] [-M minpat] [-L maxpat] [-a] [-w] [-v] [-t type] [-d delimiter] < data .." << endl; return -1; } } if (type == "int") { PrefixSpan<unsigned int> prefixspan (minsup, minpat, maxpat, all, where, delimiter, verbose); prefixspan.read (cin); prefixspan.run (cout); }else if (type == "short") { PrefixSpan<unsigned short> prefixspan (minsup, minpat, maxpat, all, where, delimiter, verbose); prefixspan.read (cin); prefixspan.run (cout); } else if (type == "char") { PrefixSpan<unsigned char> prefixspan (minsup, minpat, maxpat, all, where, delimiter, verbose); prefixspan.read (cin); prefixspan.run (cout); } else if (type == "string") { PrefixSpan<string> prefixspan (minsup, minpat, maxpat, all, where, delimiter, verbose); prefixspan.read (cin); prefixspan.run (cout); } else { cerr << "Unknown Item Type: " << type << " : choose from [string|int|short|char]" << endl; return -1; } return 0; }

  Read the article

• SQL SERVER – Guest Post – Jonathan Kehayias – Wait Type – Day 16 of 28

  - by pinaldave

  Jonathan Kehayias (Blog | Twitter) is a MCITP Database Administrator and Developer, who got started in SQL Server in 2004 as a database developer and report writer in the natural gas industry. After spending two and a half years working in TSQL, in late 2006, he transitioned to the role of SQL Database Administrator. His primary passion is performance tuning, where he frequently rewrites queries for better performance and performs in depth analysis of index implementation and usage. Jonathan blogs regularly on SQLBlog, and was a coauthor of Professional SQL Server 2008 Internals and Troubleshooting. On a personal note, I think Jonathan is extremely positive person. In every conversation with him I have found that he is always eager to help and encourage. Every time he finds something needs to be approved, he has contacted me without hesitation and guided me to improve, change and learn. During all the time, he has not lost his focus to help larger community. I am honored that he has accepted to provide his views on complex subject of Wait Types and Queues. Currently I am reading his series on Extended Events. Here is the guest blog post by Jonathan: SQL Server troubleshooting is all about correlating related pieces of information together to indentify where exactly the root cause of a problem lies. In my daily work as a DBA, I generally get phone calls like, “So and so application is slow, what’s wrong with the SQL Server.” One of the funny things about the letters DBA is that they go so well with Default Blame Acceptor, and I really wish that I knew exactly who the first person was that pointed that out to me, because it really fits at times. A lot of times when I get this call, the problem isn’t related to SQL Server at all, but every now and then in my initial quick checks, something pops up that makes me start looking at things further. The SQL Server is slow, we see a number of tasks waiting on ASYNC_IO_COMPLETION, IO_COMPLETION, or PAGEIOLATCH_* waits in sys.dm_exec_requests and sys.dm_exec_waiting_tasks. These are also some of the highest wait types in sys.dm_os_wait_stats for the server, so it would appear that we have a disk I/O bottleneck on the machine. A quick check of sys.dm_io_virtual_file_stats() and tempdb shows a high write stall rate, while our user databases show high read stall rates on the data files. A quick check of some performance counters and Page Life Expectancy on the server is bouncing up and down in the 50-150 range, the Free Page counter consistently hits zero, and the Free List Stalls/sec counter keeps jumping over 10, but Buffer Cache Hit Ratio is 98-99%. Where exactly is the problem? In this case, which happens to be based on a real scenario I faced a few years back, the problem may not be a disk bottleneck at all; it may very well be a memory pressure issue on the server. A quick check of the system spec’s and it is a dual duo core server with 8GB RAM running SQL Server 2005 SP1 x64 on Windows Server 2003 R2 x64. Max Server memory is configured at 6GB and we think that this should be enough to handle the workload; or is it? This is a unique scenario because there are a couple of things happening inside of this system, and they all relate to what the root cause of the performance problem is on the system. If we were to query sys.dm_exec_query_stats for the TOP 10 queries, by max_physical_reads, max_logical_reads, and max_worker_time, we may be able to find some queries that were using excessive I/O and possibly CPU against the system in their worst single execution. We can also CROSS APPLY to sys.dm_exec_sql_text() and see the statement text, and also CROSS APPLY sys.dm_exec_query_plan() to get the execution plan stored in cache. Ok, quick check, the plans are pretty big, I see some large index seeks, that estimate 2.8GB of data movement between operators, but everything looks like it is optimized the best it can be. Nothing really stands out in the code, and the indexing looks correct, and I should have enough memory to handle this in cache, so it must be a disk I/O problem right? Not exactly! If we were to look at how much memory the plan cache is taking by querying sys.dm_os_memory_clerks for the CACHESTORE_SQLCP and CACHESTORE_OBJCP clerks we might be surprised at what we find. In SQL Server 2005 RTM and SP1, the plan cache was allowed to take up to 75% of the memory under 8GB. I’ll give you a second to go back and read that again. Yes, you read it correctly, it says 75% of the memory under 8GB, but you don’t have to take my word for it, you can validate this by reading Changes in Caching Behavior between SQL Server 2000, SQL Server 2005 RTM and SQL Server 2005 SP2. In this scenario the application uses an entirely adhoc workload against SQL Server and this leads to plan cache bloat, and up to 4.5GB of our 6GB of memory for SQL can be consumed by the plan cache in SQL Server 2005 SP1. This in turn reduces the size of the buffer cache to just 1.5GB, causing our 2.8GB of data movement in this expensive plan to cause complete flushing of the buffer cache, not just once initially, but then another time during the queries execution, resulting in excessive physical I/O from disk. Keep in mind that this is not the only query executing at the time this occurs. Remember the output of sys.dm_io_virtual_file_stats() showed high read stalls on the data files for our user databases versus higher write stalls for tempdb? The memory pressure is also forcing heavier use of tempdb to handle sorting and hashing in the environment as well. The real clue here is the Memory counters for the instance; Page Life Expectancy, Free List Pages, and Free List Stalls/sec. The fact that Page Life Expectancy is fluctuating between 50 and 150 constantly is a sign that the buffer cache is experiencing constant churn of data, once every minute to two and a half minutes. If you add to the Page Life Expectancy counter, the consistent bottoming out of Free List Pages along with Free List Stalls/sec consistently spiking over 10, and you have the perfect memory pressure scenario. All of sudden it may not be that our disk subsystem is the problem, but is instead an innocent bystander and victim. Side Note: The Page Life Expectancy counter dropping briefly and then returning to normal operating values intermittently is not necessarily a sign that the server is under memory pressure. The Books Online and a number of other references will tell you that this counter should remain on average above 300 which is the time in seconds a page will remain in cache before being flushed or aged out. This number, which equates to just five minutes, is incredibly low for modern systems and most published documents pre-date the predominance of 64 bit computing and easy availability to larger amounts of memory in SQL Servers. As food for thought, consider that my personal laptop has more memory in it than most SQL Servers did at the time those numbers were posted. I would argue that today, a system churning the buffer cache every five minutes is in need of some serious tuning or a hardware upgrade. Back to our problem and its investigation: There are two things really wrong with this server; first the plan cache is excessively consuming memory and bloated in size and we need to look at that and second we need to evaluate upgrading the memory to accommodate the workload being performed. In the case of the server I was working on there were a lot of single use plans found in sys.dm_exec_cached_plans (where usecounts=1). Single use plans waste space in the plan cache, especially when they are adhoc plans for statements that had concatenated filter criteria that is not likely to reoccur with any frequency.  SQL Server 2005 doesn’t natively have a way to evict a single plan from cache like SQL Server 2008 does, but MVP Kalen Delaney, showed a hack to evict a single plan by creating a plan guide for the statement and then dropping that plan guide in her blog post Geek City: Clearing a Single Plan from Cache. We could put that hack in place in a job to automate cleaning out all the single use plans periodically, minimizing the size of the plan cache, but a better solution would be to fix the application so that it uses proper parameterized calls to the database. You didn’t write the app, and you can’t change its design? Ok, well you could try to force parameterization to occur by creating and keeping plan guides in place, or we can try forcing parameterization at the database level by using ALTER DATABASE <dbname> SET PARAMETERIZATION FORCED and that might help. If neither of these help, we could periodically dump the plan cache for that database, as discussed as being a problem in Kalen’s blog post referenced above; not an ideal scenario. The other option is to increase the memory on the server to 16GB or 32GB, if the hardware allows it, which will increase the size of the plan cache as well as the buffer cache. In SQL Server 2005 SP1, on a system with 16GB of memory, if we set max server memory to 14GB the plan cache could use at most 9GB  [(8GB*.75)+(6GB*.5)=(6+3)=9GB], leaving 5GB for the buffer cache.  If we went to 32GB of memory and set max server memory to 28GB, the plan cache could use at most 16GB [(8*.75)+(20*.5)=(6+10)=16GB], leaving 12GB for the buffer cache. Thankfully we have SQL Server 2005 Service Pack 2, 3, and 4 these days which include the changes in plan cache sizing discussed in the Changes to Caching Behavior between SQL Server 2000, SQL Server 2005 RTM and SQL Server 2005 SP2 blog post. In real life, when I was troubleshooting this problem, I spent a week trying to chase down the cause of the disk I/O bottleneck with our Server Admin and SAN Admin, and there wasn’t much that could be done immediately there, so I finally asked if we could increase the memory on the server to 16GB, which did fix the problem. It wasn’t until I had this same problem occur on another system that I actually figured out how to really troubleshoot this down to the root cause.  I couldn’t believe the size of the plan cache on the server with 16GB of memory when I actually learned about this and went back to look at it. SQL Server is constantly telling a story to anyone that will listen. As the DBA, you have to sit back and listen to all that it’s telling you and then evaluate the big picture and how all the data you can gather from SQL about performance relate to each other. One of the greatest tools out there is actually a free in the form of Diagnostic Scripts for SQL Server 2005 and 2008, created by MVP Glenn Alan Berry. Glenn’s scripts collect a majority of the information that SQL has to offer for rapid troubleshooting of problems, and he includes a lot of notes about what the outputs of each individual query might be telling you. When I read Pinal’s blog post SQL SERVER – ASYNC_IO_COMPLETION – Wait Type – Day 11 of 28, I noticed that he referenced Checking Memory Related Performance Counters in his post, but there was no real explanation about why checking memory counters is so important when looking at an I/O related wait type. I thought I’d chat with him briefly on Google Talk/Twitter DM and point this out, and offer a couple of other points I noted, so that he could add the information to his blog post if he found it useful.  Instead he asked that I write a guest blog for this. I am honored to be a guest blogger, and to be able to share this kind of information with the community. The information contained in this blog post is a glimpse at how I do troubleshooting almost every day of the week in my own environment. SQL Server provides us with a lot of information about how it is running, and where it may be having problems, it is up to us to play detective and find out how all that information comes together to tell us what’s really the problem. This blog post is written by Jonathan Kehayias (Blog | Twitter). Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• BizTalk host throttling &ndash; Singleton pattern and High database size

  - by S.E.R.

  Originally posted on: http://geekswithblogs.net/SERivas/archive/2013/06/30/biztalk-host-throttling-ndash-singleton-pattern-and-high-database-size.aspxI have worked for some days around the singleton pattern (for those unfamiliar with it, read this post by Victor Fehlberg) and have come across a few very interesting posts, among which one dealt with performance issues (here, also by Victor Fehlberg). Simply put: if you have an orchestration which implements the singleton pattern, then performances will continuously decrease as the orchestration receives and consumes messages, and that behavior is more obvious when the orchestration never ends (ie : it keeps looping and never terminates or completes). As I experienced the same kind of problem (actually I was alerted by SCOM, which told me that the host was being throttled because of High database size), I thought it would be a good idea to dig a little bit a see what happens deep inside BizTalk and thus understand the reasons for this behavior. NOTE: in this article, I will focus on this High database size throttling condition. I will try and work on the other conditions in some not too distant future… Test conditions The singleton orchestration For the purpose of this study, I have created the following orchestration, which is a very basic implementation of a singleton that piles up incoming messages, then does something else when a certain timeout has been reached without receiving another message: Throttling settings I have two distinct hosts : one that hosts the receive port (basic FILE port) : Ports_ReceiveHostone that hosts the orchestration : ProcessingHost In order to emphasize the throttling mechanism, I have modified the throttling settings for each of these hosts are as follows (all other parameters are set to the default value): [Throttling thresholds] Message count in database: 500 (default value : 50000) Evolution of performance counters when submitting messages Since we are investigating the High database size throttling condition, here are the performance counter that we should take a look at (all of them are in the BizTalk:Message Agent performance object): Database sizeHigh database sizeMessage delivery throttling stateMessage publishing throttling stateMessage delivery delay (ms)Message publishing delay (ms)Message delivery throttling state durationMessage publishing throttling state duration (If you are not used to Perfmon, I strongly recommend that you start using it right now: it is a wonderful tool that allows you to open the hood and see what is going on inside BizTalk – and other systems) Database size It is quite obvious that we will start by watching the database size and high database size counters, just to see when the first reaches the configured threshold (500) and when the second rings the alarm. NOTE : During this test I submitted 600 messages, one message at a time every 10ms to see the evolution of the counters we have previously selected. It might not show very well on this screenshot, but here is what happened: From 15:46:50 to 15:47:50, the database size for the Ports_ReceiveHost host (blue line) kept growing until it reached a maximum of 504.At 15:47:50, the high database size alert fires At first I was surprised by this result: why is it the database size of the receiving host that keeps growing since it is the processing host that piles up messages? Actually, it makes total sense. This counter measures the size of the database queue that is being filled by the host, not consumed. Therefore, the high database size alert is raised on the host that fills the queue: Ports_ReceiveHost. More information is available on the Public MPWiki page. Now, looking at the Message publishing throttling state for the receiving host (green line), we can see that a throttling condition has been reached at 15:47:50: We can also see that the Message publishing delay(ms) (blue line) has begun growing slowly from this point. All of this explains why performances keep decreasing when a singleton keeps processing new messages: the database size grows and when it has exceeded the Message count in database threshold, the host is throttled and the publishing delay keeps increasing. Digging further So, what happens to the database queue then? Is it flushed some day or does it keep growing and growing indefinitely? The real question being: will the host be throttled forever because of this singleton? To answer this question, I set the Message count in database threshold to 20 (this value is very low in order not to wait for too long, otherwise I certainly would have fallen asleep in front of my screen) and I submitted 30 messages. The test was started at 18:26. At 18:56 (ie : exactly 30min later) the throttling was stopped and the database size was divided by 2. 30 min later again, the database size had dropped to almost zero: I guess I’ll have to find some documentation and do some more testing before I sort this out! My guess is that some maintenance job is at work here, though I cannot tell which one Digging even further If we take a look at the Message delivery throttling state counter for the processing host, we can see that this host was also throttled during the submission of the 600 documents: The value for the counter was 1, meaning that Message delivery incoming rate for the host instance exceeds the Message delivery outgoing rate * the specified Rate overdrive factor (percent) value. We will see this another day… :) A last word Let’s end this article with a warning: DO NOT CHANGE THE THROTTLING SETTINGS LIGHTLY! The temptation can be great to just bypass throttling by setting very high values for each parameter (or zero in some cases, which simply disables throttling). Nevertheless, always keep in mind that this mechanism is here for a very good reason: prevent your BizTalk infrastructure from exploding!! So whatever you do with those settings, do a lot of testing and benchmarking!

  Read the article

• SQL SERVER – DMV – sys.dm_exec_query_optimizer_info – Statistics of Optimizer

  - by pinaldave

  Incredibly, SQL Server has so much information to share with us. Every single day, I am amazed with this SQL Server technology. Sometimes I find several interesting information by just querying few of the DMV. And when I present this info in front of my client during performance tuning consultancy, they are surprised with my findings. Today, I am going to share one of the hidden gems of DMV with you, the one which I frequently use to understand what’s going on under the hood of SQL Server. SQL Server keeps the record of most of the operations of the Query Optimizer. We can learn many interesting details about the optimizer which can be utilized to improve the performance of server. SELECT * FROM sys.dm_exec_query_optimizer_info WHERE counter IN ('optimizations', 'elapsed time','final cost', 'insert stmt','delete stmt','update stmt', 'merge stmt','contains subquery','tables', 'hints','order hint','join hint', 'view reference','remote query','maximum DOP', 'maximum recursion level','indexed views loaded', 'indexed views matched','indexed views used', 'indexed views updated','dynamic cursor request', 'fast forward cursor request') All occurrence values are cumulative and are set to 0 at system restart. All values for value fields are set to NULL at system restart. I have removed a few of the internal counters from the script above, and kept only documented details. Let us check the result of the above query. As you can see, there is so much vital information that is revealed in above query. I can easily say so many things about how many times Optimizer was triggered and what the average time taken by it to optimize my queries was. Additionally, I can also determine how many times update, insert or delete statements were optimized. I was able to quickly figure out that my client was overusing the Query Hints using this dynamic management view. If you have been reading my blog, I am sure you are aware of my series related to SQL Server Views SQL SERVER – The Limitations of the Views – Eleven and more…. With this, I can take a quick look and figure out how many times Views were used in various solutions within the query. Moreover, you can easily know what fraction of the optimizations has been involved in tuning server. For example, the following query would tell me, in total optimizations, what the fraction of time View was “reference“. As this View also includes system Views and DMVs, the number is a bit higher on my machine. SELECT (SELECT CAST (occurrence AS FLOAT) FROM sys.dm_exec_query_optimizer_info WHERE counter = 'view reference') / (SELECT CAST (occurrence AS FLOAT) FROM sys.dm_exec_query_optimizer_info WHERE counter = 'optimizations') AS ViewReferencedFraction Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL DMV, SQL Optimization, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Google Updates Android Developer Kit

  Revision 3 of Android Native Development Kit (NDK) lets developers write performance-critical portions of an application in native code.

  Read the article

• Mise à jour Systèmes n°10 de l'exercice 2012 – 25 octobre 2011

  - by swalker

  Logiciels Systèmes, Stockage et Serveurs Sun Modifications des tarifs : Oracle Révision de la tarification internationale pour les matériels et logiciels Systèmes Révision de la tarification internationale pour les matériels et logiciels hérités Oracle Que devez-vous faire ? Chaque mise à jour Systèmes inclut des modifications de la tarification Systèmes et deux fichiers : le document d'annonce (PDF) et les détails de l'annonce (XLS). Les numéros d'identification indiqués dans les documents d'annonce vous permettent de retrouver toutes les références produit concernées par l'annonce en question dans la feuille de calcul. Informations complémentaires Rendez-vous régulièrement sur la page des Tarifs Systèmes du portail OPN pour en savoir plus sur ces mises à jour et connaître les derniers tarifs et les dernières ressources applicables. * Avertissement : Les informations sur la tarification des systèmes Oracle sont des informations confidentielles Oracle, qui vous sont transmises en vertu des modalités de votre contrat Oracle PartnerNetwork.

  Read the article

• Ardour won't rewind when jack time master

  - by Edward

  Using Ubuntu Studio 12.04, ardour will not rewind when it is set to the jack time master. I've read that this could be due to a jack/ardour version conflict, but I am not sure what the correct combo should be. The same thing happens with "ardour 2.8.14 (built from revision 13065)" and "ardour 2.8.12 (built from revision 10144)". The latter is the default installation with ubuntu studio 12.04 LTS. Linux "/proc/version" reports as Linux version 3.2.0-23-lowlatency-pae (buildd@vernadsky) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #31-Ubuntu SMP PREEMPT Wed Apr 11 04:07:36 UTC 2012 and "jackd --version" reports as: jackdmp 1.9.8 Copyright 2001-2005 Paul Davis and others. Copyright 2004-2011 Grame. jackdmp comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details jackdmp version 1.9.8 tmpdir /dev/shm protocol 8 Thanks for any help.

  Read the article

• ETPM/OUAF 2.3.1 Framework Overview - Session 3

  - by MHundal

  The OUAF Framework Session 3 is now available. This session covered the following topics: 1. UI Maps - the generation of display of UI Maps in the system based on the setup of the Business Object.  Tips and tricks for generating the UI Map. 2. BPA Scripts - how scripts have changed using the different step types.  Overview of the BPA Scripts. 3. Case Study - a small presentation of using the different options available when implementing requirements. 4. Revision Control - the options for revision control of configuration objects in ETPM. You can stream the recording using the following link: https://oracletalk.webex.com/oracletalk/ldr.php?AT=pb&SP=MC&rID=70894897&rKey=243f49614fd5d9c6 You can download the recording using the following link: https://oracletalk.webex.com/oracletalk/lsr.php?AT=dw&SP=MC&rID=70894897&rKey=863c9dacce78aad2

  Read the article

• Downloading specific video renditions in WebCenter Content

  - by Kyle Hatlestad

  I recently had a question come up on one of my previous blog articles about downloading a specific video rendition.  When accessing image renditions, you simply need to pass in the 'Rendition=<rendition name>' parameter on the GET_FILE service and it will be returned.  But when you try that with videos, you get the error message, "Unable to download '<Content ID>'. The rendition or attachment '<Rendition Name>' could not be found in the list manifest of the revision with internal revision ID '<dID>'. [Read More] 

  Read the article

• How to attach turrets to tiles in a tile based game

  - by Joseph St. Pierre

  I am a flash developer, and I am building a Tower Defense game. The world is being built through tiles, and I have gotten that accomplished easily. I have also gotten level changes and enemy spawning down as well. However, I wish the player to be able to spawn turrets, and have those turrets be on specific tiles, based upon where the player placed it. Here is my code: stop(); colOffset = 50; rowOffset = 50; guns = []; placed = true; dead = 0; spawned = 0; level = 1; interval = 350 / level; amount = level * 20; counter = 0; numCol = 14; numRow = 10; tiles = []; k = 0; create = false; tileName = new Array("road","grass","end", "start"); board = new Array( new Array(1,1,1,1,3,1,1,1,1,1,2,1,1,1), new Array(1,1,1,0,0,1,1,1,1,1,0,1,1,1), new Array(1,1,1,0,1,1,1,1,1,1,0,0,1,1), new Array(1,1,1,0,0,0,1,1,1,1,1,0,1,1), new Array(1,1,1,0,1,0,0,0,1,1,1,0,0,1), new Array(1,1,1,0,1,1,1,0,0,1,1,1,0,1), new Array(1,1,0,0,1,1,1,1,0,1,1,0,0,1), new Array(1,1,0,1,1,1,1,1,0,1,0,0,1,1), new Array(1,1,0,0,0,0,0,0,0,1,0,1,1,1), new Array(1,1,1,1,1,1,1,1,0,0,0,1,1,1) ); buildBoard(); function buildBoard(){ for ( col = 0; col < numCol; col++){ for ( row = 0; row < numRow; row++){ _root.attachMovie("tile", "tile_" + col + "_" + row, _root.getNextHighestDepth()); theTile = eval("tile_" + col + "_" + row); theTile._x = (col * 50); theTile._y = (row * 50); theTile.row = row; theTile.col = col; tileType = board[row][col]; theTile.gotoAndStop(tileName[tileType]); tiles.push(theTile); } } } init(); function init(){ onEnterFrame = function(){ counter += 1; if ( spawned < amount && counter > 50){ min= _root.attachMovie("minion","minion",_root.getNextHighestDepth()); min._x = tile_4_0._x + 25; min._y = tile_4_0._y + 25; min.health = 100; choose = Math.round(Math.random()); if ( choose == 0 ){ min.waypointX = [ tile_4_1._x +25, tile_3_1._x + 25, tile_3_2._x + 25, tile_3_6._x + 25, tile_2_6._x + 25, tile_2_8._x + 25, tile_8_8._x + 25, tile_8_9._x + 25, tile_10_9._x + 25, tile_10_7._x + 25, tile_11_7._x + 25, tile_11_6._x + 25, tile_12_6._x + 25, tile_12_4._x + 25, tile_11_4._x + 25, tile_11_2._x + 25, tile_10_2._x + 25, tile_10_0._x + 25]; min.waypointY = [ tile_4_1._y +25, tile_3_1._y + 25, tile_3_2._y + 25, tile_3_6._y + 25, tile_2_6._y + 25, tile_2_8._y + 25, tile_8_8._y + 25, tile_8_9._y + 25, tile_10_9._y + 25, tile_10_7._y + 25, tile_11_7._y + 25, tile_11_6._y + 25, tile_12_6._y + 25, tile_12_4._y + 25, tile_11_4._y + 25, tile_11_2._y + 25, tile_10_2._y + 25, tile_10_0._y + 25]; } else if ( choose == 1 ){ min.waypointX = [ tile_4_1._x +25, tile_3_1._x + 25, tile_3_2._x + 25, tile_3_3._x + 25, tile_5_3._x + 25, tile_5_4._x + 25, tile_7_4._x + 25, tile_7_5._x + 25, tile_8_5._x + 25, tile_8_8._x + 25, tile_8_9._x + 25, tile_10_9._x + 25, tile_10_7._x + 25, tile_11_7._x + 25, tile_11_6._x + 25, tile_12_6._x + 25, tile_12_4._x + 25, tile_11_4._x + 25, tile_11_2._x + 25, tile_10_2._x + 25, tile_10_0._x + 25 ]; min.waypointY = [ tile_4_1._y +25, tile_3_1._y + 25, tile_3_2._y + 25, tile_3_3._y + 25, tile_5_3._y + 25, tile_5_4._y + 25, tile_7_4._y + 25, tile_7_5._y + 25, tile_8_5._y + 25, tile_8_8._y + 25, tile_8_9._y + 25, tile_10_9._y + 25, tile_10_7._y + 25, tile_11_7._y + 25, tile_11_6._y + 25, tile_12_6._y + 25, tile_12_4._y + 25, tile_11_4._y + 25, tile_11_2._y + 25, tile_10_2._y + 25, tile_10_0._y + 25 ]; } min.i = 0; counter = 0; spawned += 1; min.onEnterFrame = function(){ dx = this.waypointX[this.i] - this._x; dy = this.waypointY[this.i] - this._y; radians = Math.atan2(dy,dx); degrees = radians * 180 / Math.PI; xspeed = Math.cos(radians); yspeed = Math.sin(radians); this._x += xspeed; this._y += yspeed; if( this._x == this.waypointX[this.i] && this._y == this.waypointY[this.i]){ this.i++; } if ( this._x == tile_10_0._x + 25 && this._y == tile_10_0._y + 25){ this.removeMovieClip(); dead += 1; } } } if ( dead >= amount ){ dead = 0; level += 1; amount = level * 20; spawned = 0; } } btnM.onRelease = function(){ create = true; } } game.onEnterFrame = function(){ } It is possible for me however to complete this task, but only once. I am able to make the turret, drag it over to a tile, and have it attach itself to the tile. No problem. The issue is, I cannot do these multiple times. Please Help.

  Read the article

• Hide admin menu if no admin option is available

  - by Jorge

  If you have a menu "Admin tasks" and different admin tasks (like 10) that you could separately assign to each user, but there are users who don't have any admin tasks, how would you deal with "Hiding admin menu" for those users? I was thinking of 3 ways: 1) Javascript, check if Admin menu is empty and then hide it. 2) Check for all permissions in Admin menu, with a counter, and show it if counter 0. And then also re-check the permissions for each item to show. 3) Save all permissions in associative array. Test all and assign ' true' to granted items. When building the menu, have a function that tests if there is at least one permission granted. I wouldn't need to re-check permissions against DB, just against the array for each item. Is there any better way?

  Read the article

• Solving a probabilistic problem

  - by ????????????

  So I am interested in Computational Investing and came across this problem on a wiki page: Write a program to discover the answer to this puzzle:"Let's say men and women are paid equally (from the same uniform distribution). If women date randomly and marry the first man with a higher salary, what fraction of the population will get married?" I don't have much knowledge in probability theory, so I'm not really sure how to implement this in code. My thinking: Populate two arrays(female,male) with random salary values from a uniform distribution. Randomly pair one female and one male array element and see if condition of higher salary is met. If it is, increment a counter. Divide counter by population and get percentage. Is this the correct logic? Do woman continually date until there is no males left with higher salaries than women?

  Read the article

• How to apply effects that occur (or change) over time to characters in a game?

  - by Joshua Harris

  So assume that I have a system that applies Effects to Characters like so: public class Character { private Collection<Effect> _effects; public void AddEffect (Effect e) { e.ApplyTo(this); _effects.Add(e); } public void RemoveEffect (Effect e) { e.RemoveFrom(this); _effects.Remove(e); } } public interface Effect { public void ApplyTo (Character character); public void RemoveFrom (Character character); } Example Effect: Armor Buff for 5 seconds. void someFunction() { // Do Stuff ... Timer armorTimer = new Timer(5 seconds); ArmorBuff armorbuff = new ArmorBuff(); character.AddEffect(armorBuff); armorTimer.Start(); // Do more stuff ... } // Some where else in code public void ArmorTimer_Complete() { character.RemoveEffect(armorBuff); } public class ArmorBuff implements Effect { public void applyTo(Character character) { character.changeArmor(20); } public void removeFrom(Character character) { character.changeArmor(-20); } } Ok, so this example would buff the Characters armor for 5 seconds. Easy to get working. But what about effects that change over the duration of the effect being applied. Two examples come to mind: Damage Over Time: 200 damage every second for 3 seconds. I could mimic this by applying an Effect that lasts for 1 second and has a counter set to 3, then when it is removed it could deal 200 damage, clone itself, decrement the counter of the clone, and apply the clone to the character. If it repeats this until the counter is 0, then you got a damage over time ability. I'm not a huge fan of this approach, but it does describe the behavior exactly. Degenerating Speed Boost: Gain a speed boost that degrades over 3 seconds until you return to your normal speed. This is a bit harder. I can basically do the same thing as above except having timers set to some portion of a second, such that they occur fast enough to give the appearance of degenerating smoothly over time (even though they are really just stepping down incrementally). I feel like you could get away with only 12 steps over a second (maybe less, I would have to test it and see), but this doesn't seem very elegant to me. The only other way to implement this effect would be to change the system so that the Character checks the _effects collection for effects that alter any of the properties any time that they are being used. I could handle this in functions like getCurrentSpeed() and getCurrentArmor(), but you can imagine how much of a hassle it would be to have that kind of overhead every time you want to do a calculation with movement speed (which would be every time you move your character). Is there a better way to deal with these kinds of effects or events?

  Read the article

• javaf, problem...plz help someone...urgent [closed]

  - by innovative_aj

  i have made a word guessing game, when i click myButton to check if the guessed word is right or wrong, ball1 is moved into the "container" if its right, i want that when i click the button again and if the typed word is right, the 2nd ball should move into the container too... means one ball per correct answer...plz help me someone and provide me with the code that i can implement, its quite urgent... controller class coding /* * To change this template, choose Tools | Templates * and open the template in the editor. */ package project3; import java.net.URL; import java.util.ResourceBundle; import javafx.event.ActionEvent; import javafx.event.EventHandler; import javafx.fxml.FXML; import javafx.fxml.Initializable; import javafx.scene.control.Button; import javafx.scene.control.Label; import javafx.scene.control.TextField; import javafx.scene.layout.StackPane; import javafx.scene.shape.Circle; /** * FXML Controller class * * @xxx */ public class MyFxmlController implements Initializable { @FXML // fx:id="ball1" private Circle ball1; // Value injected by FXMLLoader @FXML // fx:id="ball2" private Circle ball2; // Value injected by FXMLLoader @FXML // fx:id="ball3" private Circle ball3; // Value injected by FXMLLoader @FXML // fx:id="ball4" private Circle ball4; // Value injected by FXMLLoader @FXML // fx:id="container" private Circle container; // Value injected by FXMLLoader @FXML // fx:id="myButton" private Button myButton; // Value injected by FXMLLoader @FXML // fx:id="myLabel1" private Label myLabel1; // Value injected by FXMLLoader @FXML // fx:id="myLabel2" private Label myLabel2; // Value injected by FXMLLoader @FXML // fx:id="pane" private StackPane pane; // Value injected by FXMLLoader @FXML // fx:id="txt" private TextField txt; // Value injected by FXMLLoader @Override // This method is called by the FXMLLoader when initialization is complete public void initialize(URL fxmlFileLocation, ResourceBundle resources) { assert ball1 != null : "fx:id=\"ball1\" was not injected: check your FXML file 'MyFxml.fxml'."; assert ball2 != null : "fx:id=\"ball2\" was not injected: check your FXML file 'MyFxml.fxml'."; assert ball3 != null : "fx:id=\"ball3\" was not injected: check your FXML file 'MyFxml.fxml'."; assert ball4 != null : "fx:id=\"ball4\" was not injected: check your FXML file 'MyFxml.fxml'."; assert container != null : "fx:id=\"container\" was not injected: check your FXML file 'MyFxml.fxml'."; assert myButton != null : "fx:id=\"myButton\" was not injected: check your FXML file 'MyFxml.fxml'."; assert myLabel1 != null : "fx:id=\"myLabel1\" was not injected: check your FXML file 'MyFxml.fxml'."; assert myLabel2 != null : "fx:id=\"myLabel2\" was not injected: check your FXML file 'MyFxml.fxml'."; assert pane != null : "fx:id=\"pane\" was not injected: check your FXML file 'MyFxml.fxml'."; assert txt != null : "fx:id=\"txt\" was not injected: check your FXML file 'MyFxml.fxml'."; // initialize your logic here: all @FXML variables will have been injected myButton.setOnAction(new EventHandler<ActionEvent>(){ @Override public void handle(ActionEvent event) { int count = 0; String guessed=txt.getText(); boolean result; result=MyCode.check(guessed); if(result) { ball1.setTranslateX(600); ball1.setTranslateY(250-container.getRadius()); //ball2.setTranslateX(600); // ball2.setTranslateY(250-container.getRadius()); } else System.out.println("wrong"); } }); } } word guessing logic public class MyCode { static String x="Netbeans"; static String y[]={"net","beans","neat","beat","bet"}; //static int counter; // public MyCode() { // counter++; //} static boolean check(String guessed) { int count=0; boolean result=false; //counter++; //System.out.println("turns"+counter); for(count=0;count<5;count++) { if(guessed.equals(y[count])) { result=true; break; } } if(result) System.out.println("Right"); else System.out.println("Wrong"); return result; } }

  Read the article

• Why is an inverse loop faster than a normal loop (test included)

  - by Saif Bechan

  I have been running some small tests in PHP on loops. I do not know if my method is good. I have found that a inverse loop is faster than a normal loop. I have also found that a while-loop is faster than a for-loop. Setup <?php $counter = 10000000; $w=0;$x=0;$y=0;$z=0; $wstart=0;$xstart=0;$ystart=0;$zstart=0; $wend=0;$xend=0;$yend=0;$zend=0; $wstart = microtime(true); for($w=0; $w<$counter; $w++){ echo ''; } $wend = microtime(true); echo "normal for: " . ($wend - $wstart) . "<br />"; $xstart = microtime(true); for($x=$counter; $x>0; $x--){ echo ''; } $xend = microtime(true); echo "inverse for: " . ($xend - $xstart) . "<br />"; echo "<hr> normal - inverse: " . (($wend - $wstart) - ($xend - $xstart)) . "<hr>"; $ystart = microtime(true); $y=0; while($y<$counter){ echo ''; $y++; } $yend = microtime(true); echo "normal while: " . ($yend - $ystart) . "<br />"; $zstart = microtime(true); $z=$counter; while($z>0){ echo ''; $z--; } $zend = microtime(true); echo "inverse while: " . ($zend - $zstart) . "<br />"; echo "<hr> normal - inverse: " . (($yend - $ystart) - ($zend - $zstart)) . "<hr>"; echo "<hr> inverse for - inverse while: " . (($xend - $xstart) - ($zend - $zstart)) . "<hr>"; ?> Average Results The difference in for-loop normal for: 1.0908501148224 inverse for: 1.0212800502777 normal - inverse: 0.069570064544678 The difference in while-loop normal while: 1.0395669937134 inverse while: 0.99321985244751 normal - inverse: 0.046347141265869 The difference in for-loop and while-loop inverse for - inverse while: 0.0280601978302 Questions My question is can someone explain these differences in results? And is my method of benchmarking been correct?

  Read the article

• Test whether pixel is inside the blobs for ofxOpenCV

  - by mia

  I am doing an application of the concept of the dodgeball and need to test of the pixel of the ball is in the blobs capture(which is the image of the player) I am stucked and ran out of idea of how to implement it. I manage to do a little progress which have the blobs but I not sure how to test it. Please help. I am a newbie who in a desperate condition. Thank you. This is some of my code. void testApp::setup(){ #ifdef _USE_LIVE_VIDEO vidGrabber.setVerbose(true); vidGrabber.initGrabber(widthS,heightS); #else vidPlayer.loadMovie("fingers.mov"); vidPlayer.play(); #endif widthS = 320; heightS = 240; colorImg.allocate(widthS,heightS); grayImage.allocate(widthS,heightS); grayBg.allocate(widthS,heightS); grayDiff.allocate(widthS,heightS); ////<---what I want bLearnBakground = true; threshold = 80; //////////circle////////////// counter = 0; radius = 0; circlePosX = 100; circlePosY=200; } void testApp::update(){ ofBackground(100,100,100); bool bNewFrame = false; #ifdef _USE_LIVE_VIDEO vidGrabber.grabFrame(); bNewFrame = vidGrabber.isFrameNew(); #else vidPlayer.idleMovie(); bNewFrame = vidPlayer.isFrameNew(); #endif if (bNewFrame){ if (bLearnBakground == true){ grayBg = grayImage; // the = sign copys the pixels from grayImage into grayBg (operator overloading) bLearnBakground = false; } #ifdef _USE_LIVE_VIDEO colorImg.setFromPixels(vidGrabber.getPixels(),widthS,heightS); #else colorImg.setFromPixels(vidPlayer.getPixels(),widthS,heightS); #endif grayImage = colorImg; grayDiff.absDiff(grayBg, grayImage); grayDiff.threshold(threshold); contourFinder.findContours(grayDiff, 20, (340*240)/3, 10, true); // find holes } ////////////circle//////////////////// counter = counter + 0.05f; if(radius>=50){ circlePosX = ofRandom(10,300); circlePosY = ofRandom(10,230); } radius = 5 + 3*(counter); } void testApp::draw(){ // draw the incoming, the grayscale, the bg and the thresholded difference ofSetColor(0xffffff); //white colour grayDiff.draw(10,10);// draw start from point (0,0); // we could draw the whole contour finder // or, instead we can draw each blob individually, // this is how to get access to them: for (int i = 0; i < contourFinder.nBlobs; i++){ contourFinder.blobs[i].draw(10,10); } ///////////////circle////////////////////////// //let's draw a circle: ofSetColor(0,0,255); char buffer[255]; float a = radius; sprintf(buffer,"radius = %i",a); ofDrawBitmapString(buffer, 120, 300); if(radius>=50) { ofSetColor(255,255,255); counter = 0; } else{ ofSetColor(255,0,0); } ofFill(); ofCircle(circlePosX,circlePosY,radius); }

  Read the article

• PowerShell Import DnsShell Module

  - by krousemw

  So here's the list of available modules in this directory. As you can see DnsShell is there. PS C:\windows\system32> Get-Module -ListAvailable Directory: C:\windows\system32\WindowsPowerShell\v1.0\Modules ModuleType Name ExportedCommands ---------- ---- ---------------- Manifest ActiveDirectory {Get-ADRootDSE, New-ADObject, Rename- ADObject, Move-ADObject...} Manifest AppLocker {Set-AppLockerPolicy, Get-AppLockerPolicy, Test-AppLockerPolicy, Get-AppLo... Manifest BitsTransfer {Add-BitsFile, Remove-BitsTransfer, Complete-BitsTransfer, Get-BitsTransfe... Manifest CimCmdlets {Get-CimAssociatedInstance, Get-CimClass, Get-CimInstance, Get-CimSession...} Binary DnsShell Script ISE {New-IseSnippet, Import-IseSnippet, Get- IseSnippet} Manifest Microsoft.PowerShell.Diagnostics {Get-WinEvent, Get-Counter, Import-Counter, Export-Counter...} Manifest Microsoft.PowerShell.Host {Start-Transcript, Stop-Transcript} Manifest Microsoft.PowerShell.Management {Add-Content, Clear-Content, Clear- ItemProperty, Join-Path...} Manifest Microsoft.PowerShell.Security {Get-Acl, Set-Acl, Get-PfxCertificate, Get-Credential...} Manifest Microsoft.PowerShell.Utility {Format-List, Format-Custom, Format-Table, Format-Wide...} Manifest Microsoft.WSMan.Management {Disable-WSManCredSSP, Enable- WSManCredSSP, Get-WSManCredSSP, Set-WSManQui... Script PSDiagnostics {Disable-PSTrace, Disable- PSWSManCombinedTrace, Disable-WSManTrace, Enable... Binary PSScheduledJob {New-JobTrigger, Add-JobTrigger, Remove-JobTrigger, Get-JobTrigger...} Manifest PSWorkflow {New-PSWorkflowExecutionOption, New-PSWorkflowSession, nwsn} Manifest PSWorkflowUtility Invoke-AsWorkflow Manifest TroubleshootingPack {Get-TroubleshootingPack, Invoke-TroubleshootingPack} When I run the command to Import-Module DnsShell, I get this error and I dont know why.. PS C:\windows\system32> Import-Module DnsShell Import-Module : Could not load file or assembly 'file:///C:\windows\system32\WindowsPowerShell\v1.0\Modules\DnsShell\DnsShell.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) At line:1 char:1 + Import-Module DnsShell + ~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : NotSpecified: (:) [Import-Module], FileLoadException + FullyQualifiedErrorId : System.IO.FileLoadException,Microsoft.PowerShell.Commands.ImportModuleCommand Note: I would have posted pictures but I needed a rep of at least 10 in serverfault

  Read the article

• MultiPath configuration on RHEL5 and Clariion CX-300

  - by Kamil Z

  I have problem with discovering my FC-connected CX-300 storage. Frankly speaking I'm complete novice in FibreChannel, so step by step explanation would be appreciated. My configuration consist of two IBM HS20 blades with RHEL5.4 on board and 2x Qlogic ISP2422-based 4Gb Fibre Channel HBAs on each blade. As a FC switch there are two Brocades built in BladeCenter Chassis, and finally there is EMC Clariion CX-300. CX300, and Brocade switches should be configured properly, because they were working fine with previous configuration, which main defference was RHEL3 instead RHEL5.4 Below there is my output from several usefull commands: #lspci | grep Fibre 06:01.0 FibreChannle: Qlogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X HBA (rev 02) 06:01.1 FibreChannle: Qlogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X HBA (rev 02) #lsmod | grep qla qla2xxx 1084741 0 scsi_transport_fc 37577 1 qla2xxx scsi_mod 141717 10 scsi_dh,qla2xxx,sg,scsi_transport_fc,usb_storage,libata,mptspi,mptscsih,scsi_transport_spi,sd_mod #cat /proc/scsi/scsi Attached Devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: LSILOGIC Model: 1030 IM IM Rev: 1000 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 01 Id: 00 Lun: 00 Vendor: IBM-ESXS Model: ST936701LC FN Rev: B418 Type: Direct-Access ANSI SCSI revision: 04 Host: scsi0 Channel: 01 Id: 00 Lun: 00 Vendor: IBM-ESXS Model: ST936701LC FN Rev: B418 Type: Direct-Access ANSI SCSI revision: 04 I'd followed instructions from this site (editing /etc/multipath.conf), but i failed after multipath -ll - the output was empty. Do you have any suggestions about discovering FC Connected LUNs in such configuration?

  Read the article

• Cisco Catalyst 4500 Policy Based Routing

  - by Logan

  In order to test a new firewall I just set up I'm trying to implement policy based routing on our core switch. I want traffic from certain vlans to be routed to the new firewall while everything else continues being routed through the old firewall. I was trying to use this guide. Everything from that guide works fine except trying to run the "ip policy route-map" command in the interface configuration mode. IOS is telling me that such a command doesn't exist. A "show ip interface vlan" command says that policy routing is disabled. Any ideas? Output of "show ver": Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASEK9-M), Version 12.2(53)SG, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Thu 16-Jul-09 19:49 by prod_rel_team Image text-base: 0x10000000, data-base: 0x11D1E3CC ROM: 12.2(31r)SG2 Dagobah Revision 226, Swamp Revision 34 RTTMCB2223-1 uptime is 3 years, 22 weeks, 2 days, 19 hours, 28 minutes Uptime for this control processor is 51 weeks, 2 days, 18 hours, 2 minutes System returned to ROM by power-on System restarted at 19:22:02 UTC Tue Jul 12 2011 System image file is "bootflash:cat4500-ipbasek9-mz.122-53.sg.bin" ... cisco WS-C4510R (MPC8245) processor (revision 4) with 524288K bytes of memory. Processor board ID FOX103703W3 MPC8245 CPU at 400Mhz, Supervisor V Last reset from PowerUp 42 Virtual Ethernet interfaces 244 Gigabit Ethernet interfaces 511K bytes of non-volatile configuration memory. Configuration register is 0x2

  Read the article

• Why I cannot copy install.wim from Windows 7 ISO to USB (in linux env)

  - by fastreload

  I need to make a USB bootable disk of Windows 7 ISO. My USB is formatted to NTFS, ISO is not corrupt. I can copy install.wim elsewhere but I cannot copy it to USB. I even tried rsync. rsync error sources/install.wim rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32) rsync: write failed on "/media/52E866F5450158A4/sources/install.wim": Input/output error (5) rsync error: error in file IO (code 11) at receiver.c(322) [receiver=3.0.8] Stat for windows.vim File: `X15-65732 (2)/sources/install.wim' Size: 2188587580 Blocks: 4274600 IO Block: 4096 regular file Device: 801h/2049d Inode: 671984 Links: 1 Access: (0664/-rw-rw-r--) Uid: ( 1000/ umur) Gid: ( 1000/ umur) Access: 2011-10-17 22:59:54.754619736 +0300 Modify: 2009-07-14 12:26:40.000000000 +0300 Change: 2011-10-17 22:55:47.327358410 +0300 fdisk -l Disk /dev/sdd: 8103 MB, 8103395328 bytes 196 heads, 32 sectors/track, 2523 cylinders, total 15826944 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdd1 * 32 15826943 7913456 7 HPFS/NTFS/exFAT hdparm -I /dev/sdd: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ATA device, with non-removable media Model Number: UF?F?A????U]r???U u??tF?f?`~ Serial Number: ?@??~| Firmware Revision: ????V? Media Serial Num: $I?vnladip raititnot baelErrrol aoidgn Media Manufacturer: o eparitgns syetmiM Standards: Used: unknown (minor revision code 0x0c75) Supported: 12 8 6 Likely used: 12 Configuration: Logical max current cylinders 17218 0 heads 0 0 sectors/track 128 0 -- Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 0 MBytes device size with M = 1000*1000: 0 MBytes cache/buffer size = unknown Capabilities: IORDY(may be)(cannot be disabled) Queue depth: 11 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 0 Current = ? Recommended acoustic management value: 254, current value: 62 DMA: not supported PIO: unknown * reserved 69[0] * reserved 69[1] * reserved 69[3] * reserved 69[4] * reserved 69[7] Security: Master password revision code = 60253 not supported not enabled not locked not frozen not expired: security count not supported: enhanced erase 71112min for SECURITY ERASE UNIT. 172min for ENHANCED SECURITY ERASE UNIT. Integrity word not set (found 0xaa55, expected 0x80a5)

  Read the article

• clocksource tsc unstable

  - by amorfis

  Ok, now I have real server fault ;) After some time from booting (about one minute) my server hangs. All I can do is hard reset. Then after restart in /var/log/kern.log I can find: Jul 29 22:38:57 leonidas kernel: [ 90.729598] longhaul: Failed to set requested frequency! Jul 29 22:38:57 leonidas kernel: [ 90.731252] longhaul: Enabling "Ignore Revision ID" option. Jul 29 22:38:57 leonidas kernel: [ 91.201461] longhaul: Failed to set requested frequency! Jul 29 22:38:57 leonidas kernel: [ 91.201482] longhaul: Disabling ACPI C3 support. Jul 29 22:38:57 leonidas kernel: [ 91.204230] longhaul: Disabling "Ignore Revision ID" option. Jul 29 22:38:58 leonidas kernel: [ 91.416133] longhaul: Failed to set requested frequency! Jul 29 22:38:58 leonidas kernel: [ 91.416152] longhaul: Enabling "Ignore Revision ID" option. Jul 29 22:38:58 leonidas kernel: [ 91.960048] Clocksource tsc unstable (delta = -105611479 ns) I found some resources on the net, and it said to change clocksource, or disable ACPI. I tried disabling ACPI but it didn't help (but I noticed there was longer time before hanging). I can't change clock to hpet, because my system doesn't have such one. Output of cat /sys/devices/system/clocksource/clocksource0/available_clocksource: acpi_pm jiffies tsc My system is ubuntu server on VIA Epia hardware.

  Read the article

• Decrease in disk performance after partitioning and encryption, is this much of a drop normal?

  - by Biohazard

  I have a server that I only have remote access to. Earlier in the week I repartitioned the 2 disk raid as follows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/sda1_crypt 363G 1.8G 343G 1% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 2.0G 140K 2.0G 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sda5 461M 26M 412M 6% /boot /dev/sda7 179G 8.6G 162G 6% /data The raid consists of 2 x 300gb SAS 15k disks. Prior to the changes I made, it was being used as a single unencrypted root parition and hdparm -t /dev/sda was giving readings around 240mb/s, which I still get if I do it now: /dev/sda: Timing buffered disk reads: 730 MB in 3.00 seconds = 243.06 MB/sec Since the repartition and encryption, I get the following on the separate partitions: Unencrypted /dev/sda7: /dev/sda7: Timing buffered disk reads: 540 MB in 3.00 seconds = 179.78 MB/sec Unencrypted /dev/sda5: /dev/sda5: Timing buffered disk reads: 476 MB in 2.55 seconds = 186.86 MB/sec Encrypted /dev/mapper/sda1_crypt: /dev/mapper/sda1_crypt: Timing buffered disk reads: 150 MB in 3.03 seconds = 49.54 MB/sec I expected a drop in performance on the encrypted partition, but not that much, but I didn't expect I would get a drop in performance on the other partitions at all. The other hardware in the server is: 2 x Quad Core Intel(R) Xeon(R) CPU E5405 @ 2.00GHz and 4gb RAM $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 32 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 6/i Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-ROM GCR-8240N Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 05 I'm guessing this means the server has a PERC 6/i RAID controller? The encryption was done with default settings during debian 6 installation. I can't recall the exact specifics and am not sure how I go about finding them? Thanks

  Read the article

• Mercurial confusion - commit / push, backouts

  - by Madmanguruman

  I'm trying to set up a repository on a shared filesystem. I'm using Mercurial 2.1.2 on a Windows-based architecture. I start with an empty folder on the shared filesystem and create a repository in it. After this, I dump in the baseline files, and add them to versioning, then commit the changes. I then clone the repository to my local hard drive. I then make a change in my local repository, commit it, then push back to the shared filesystem repository. The shared repo graph I get in TortoiseHG looks strange (to me). This is the shared repo: This is the local repo: On the shared repo, the working directory always shows up on the top, then the graph goes 'down' to rev. 0 then back 'up' again through various revisions. It looks to me like I have two different branches, even though everything is on the default branch. Also, that 'top' revision always says "* Working Directory * Not a head revision!" I noticed that in my local repository, I don't get that dangling working directory at the top of the list - everything is in one branch. I also noticed that on my local repository, I can back out the tip revision with no problem. On the shared filesystem repository, I cannot, since I get an error ("Cannot backout change on a different branch"). How can this be? Aren't they supposed to be identical to each other? Am I fundamentally doing something wrong?

  Read the article

• SVN - Skipped paths

  - by Mark Steudel

  I received this message when I ran a SVN UP: Skipped 'trunk/scripts/accountability_survey_report.php' At revision 1585. Summary of conflicts: Skipped paths: 1 I've been googling trying to figure out exactly what this means and how to resolve it. I tried deleting the file and then just svn up again, but I get the following: Restored 'trunk/scripts/accountability_survey_report.php' Skipped 'trunk/scripts/accountability_survey_report.php' At revision 1585. Summary of conflicts: Skipped paths: 1 Any help is appreciated. Thnx, MS

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >