signals slots - Page 27

Driver issue for 7850 HD Diamond Windows 7

- by Mr.Student

I have an issue with windows 7 implementing the drivers ati provides for my 7850 HD Diamond video card. The video card is plugged in correctly to the PCIE 2.0 slots of my motherboard (p6t asus) with more then enough power. Fortunately the card works as I have my monitor plugged into the card itself and I can see just fine. However windows 7 does not replace the standard vga default microsoft driver with catalyst drivers that I've tried installing from online as well as the CD. Every time I install the drivers using Catalyst Install manager it always finishes with "Install complete(Warnings occured)". I then see the warnings it has which it instead reports that it successfully installed the SDK, Catalyst Install Manager, and HDMI/AUDIO packages. When I check my device manager after that, the display adapter still shows as standard vga and that its still using microsoft default display adapter. Now this current card is replacing an old card of mine which is the ATI 4890 HD which works beautifully. In fact for the old card to work, all I need to do is go to device manager and right click on standard vga - click update driver and windows 7 magically finds the correct driver to install and everything is good. Not so with the new card. I've even went into my regedits and uninstalled every bit of ati driver software before reinstalling my new card. Nothing's worked thus far. I've already exchanged my card out once and talked to customer support from my motherboard, microsoft, and ati all blaming the other. Please help me out!!

Read the article

Sun T5120: Memory issue with 8GB DIMMs, "Unsupported memory configuration"

- by watain

Read the article

Optimal Networking Setup for a 2-Story unit?

- by user29336

I am moving into a 4 bedroom two-story unit. It’s roughly 2,200 sq ft. I want absolute max throughput possible to be achieved in all focal points. We’re all in internet related industries. Between gaming and web-development latency and throughput are major factors for us. Here’s our main focal points: 1) Garage (office). downstairs 2) Each bedroom x4. upstairs 3) Living room. downstairs The fastest line we can get is Comcast 50mbdown/5up (Wideband). I am looking for the best way to achieve wireless and wired performance for our setup. Our gaming computers may be in our bedroom, and we also may bring it down to the office every now and then for “LAN” sessions. Most wireless will be happening downstairs with our laptops, but since we may do LAN sessions then hard wired latency may be important there too. My concerns: If we do only wireless there would be too much latency for gaming. I don’t know if placing one D-link DGL 4500 on the top floor would be enough; which I currently own. (http://dlink.com/us/en/home-solutions/support/product/dgl-4500-xtreme-n-gaming-router) As far as I’m aware wireless signals transfer best top down. Would this wireless router be enough on top floor and that’s it? My second strategy was a combination of wiring and wireless but I’m not sure what’s easiest way to do this? This is a place we’re renting, so I’m not sure how much leeway we have with wiring, but we’re all pretty competent... if we can’t drill through a wall we can probably “stitch” them across the edges wherever needed. Thoughts on the optimal way to do this?

Read the article

Git fails to push with error 'out of memory'

- by jwir3

I'm using gitosis on a server that has a low amount of memory, specifically around 512 MB. When I try to push a large folder (happens to be a backup from an android phone), I get: me@corellia:~/Configs/$ git push origin master Counting objects: 18, done. Delta compression using up to 8 threads. Compressing objects: 100% (14/14), done. fatal: Out of memory, malloc failed MiB | 685 KiB/s error: pack-objects died of signal 13 error: failed to push some refs to 'git@dagobah:Configs' I've been searching the web, and notably found: http://www.mail-archive.com/[email protected]/msg01747.html as well as http://git.661346.n2.nabble.com/Out-of-memory-error-during-git-push-td5443705.html but these don't seem to help me for two reasons: 1) I am not actually out of memory when I push. When I run 'top' during the push, I get: 24262 git 18 0 16204 6084 1096 S 2 1.2 0:00.12 git-unpack-obje Also, during the push if I run /head/meminfo, I get: MemTotal: 524288 kB MemFree: 289408 kB Buffers: 0 kB Cached: 0 kB SwapCached: 0 kB Active: 0 kB Inactive: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 524288 kB So, it seems that I have enough memory free, but it's actually still failing, and I'm not enough of a git guru to figure out what is happening. I would appreciate it if someone could give me a hand here and tell me what could be causing this problem, and what I can do to solve it. Thanks! EDIT: The output of running the ulimit -a command: scottj@dagobah:~$ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 204800 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) 204800 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

Read the article

Either, nginx+php-fpm bad config or nginx+php-fpm cannot handle high query?

- by The Wolf

I have wordpress installed in my server configured(hopefully with nginx+php-fpm+mariaDB). I am trying to import using wordpress importer a 1.5MB xml file. Everytime I try to upload it using the importer, it got cut of... meaning just blank screen result.. Here is my error log: actually I just posted 2 of the errors [error] 858#0: *1 connect() failed (111: Connection refused) while connecting to upstream, client: xx.xxx.xx.xx, server: xxx.com, request: "GET xxxx.html HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "xxx.com" [error] 858#0: *13 connect() failed (111: Connection refused) while connecting to upstream, client: xxx.x.xx.xx, server: xxx.com, request: "GET xxxx.php HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "xxx.com" I don't know what is the reason why it can't process the wordpress export .xml. I already increased max_file_upload & etc., but nothing happens. Hope somebody can help me. Here are my conf: nginx.conf user nginx; worker_processes 8; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; server_tokens off; keepalive_timeout 65; fastcgi_read_timeout 500; #gzip on; client_max_body_size 2M; php-fpm.conf ;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix. ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. include=/etc/php-fpm.d/*.conf ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Default Value: none pid = /var/run/php-fpm/php-fpm.pid ; Error log file ; Default Value: /var/log/php-fpm.log error_log = /var/log/php-fpm/error.log ; Log level ; Possible Values: alert, error, warning, notice, debug ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes daemonize = no ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; See /etc/php-fpm.d/*.conf [root@host etc]# vim php-fpm.conf [root@host etc]# vim php-fpm.conf ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes daemonize = no ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; See /etc/php-fpm.d/*.conf ps aux [root@host etc]# ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.1 2900 1380 ? Ss Jun02 0:00 init root 2 0.0 0.0 0 0 ? S Jun02 0:00 [kthreadd/9308] root 3 0.0 0.0 0 0 ? S Jun02 0:00 [khelper/9308] root 124 0.0 0.0 2464 576 ? S<s Jun02 0:00 /sbin/udevd -d root 460 0.0 0.1 35976 1308 ? Sl Jun02 0:00 /sbin/rsyslogd -i /var/run/syslogd.pid -c 5 root 474 0.0 0.0 8940 1028 ? Ss Jun02 0:00 /usr/sbin/sshd root 481 0.0 0.0 3264 876 ? Ss Jun02 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid root 491 0.0 0.1 6268 1432 ? S Jun02 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/host.busilak.com. mysql 584 0.1 6.8 679072 71456 ? Sl Jun02 0:04 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib/mysql/plugin --use root 586 0.0 0.3 12008 3820 ? Ss Jun02 0:01 sshd: root@pts/0 root 629 0.0 0.0 9140 756 ? Ss Jun02 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 2 root 630 0.0 0.0 9140 520 ? S Jun02 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 2 root 645 0.0 0.1 12788 1928 ? Ss Jun02 0:01 sendmail: accepting connections smmsp 653 0.0 0.1 12576 1728 ? Ss Jun02 0:00 sendmail: Queue runner@01:00:00 for /var/spool/clientmqueue root 691 0.0 0.1 7148 1184 ? Ss Jun02 0:00 crond root 698 0.0 0.1 6272 1688 pts/0 Ss Jun02 0:00 -bash root 1006 0.0 0.0 7828 924 ? Ss 00:30 0:00 nginx: master process /usr/sbin/nginx -c /etc/nginx/nginx.conf nginx 1007 0.0 0.1 8156 1724 ? S 00:30 0:00 nginx: worker process nginx 1008 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1009 0.0 0.1 8020 1356 ? S 00:30 0:00 nginx: worker process nginx 1011 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1012 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1013 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1014 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1015 0.0 0.1 8024 1344 ? S 00:30 0:00 nginx: worker process root 1030 0.0 0.2 25396 2904 ? Ss 00:30 0:00 php-fpm: master process (/etc/php-fpm.conf) apache 1031 0.0 1.9 40700 20624 ? S 00:30 0:00 php-fpm: pool www apache 1032 0.0 2.0 41924 21888 ? S 00:30 0:01 php-fpm: pool www apache 1033 0.0 1.9 41212 20848 ? S 00:30 0:01 php-fpm: pool www apache 1034 0.0 1.9 40956 20792 ? S 00:30 0:01 php-fpm: pool www apache 1035 0.0 2.0 41560 21556 ? S 00:30 0:02 php-fpm: pool www apache 1040 0.0 1.8 39292 19120 ? S 00:30 0:00 php-fpm: pool www root 1125 0.0 0.0 6080 1040 pts/0 R+ 01:04 0:00 ps aux netstat -l [root@host etc]# netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:ssh *:* LISTEN tcp 0 0 localhost.localdomain:smtp *:* LISTEN tcp 0 0 localhost.locald:cslistener *:* LISTEN tcp 0 0 *:mysql *:* LISTEN tcp 0 0 *:http *:* LISTEN tcp 0 0 *:ssh *:* LISTEN Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 60575947 /var/run/saslauthd/mux unix 2 [ ACC ] STREAM LISTENING 60574168 @/com/ubuntu/upstart unix 2 [ ACC ] STREAM LISTENING 60575873 /var/lib/mysql/mysql.sock Hope somebody can help me to figure out what is the problem.

Read the article

Troubleshoot dropped wireless connections

- by Jack

I was recently hired in the IT department of a small company (~180 users) and one of the issues that people have been complaining about is having their wi-fi connections drop during meetings. The company is using an HP ProCurve Wireless LAN with 10 APs and a controller unit located in the server room. I don't have any experience troubleshooting WLAN in a multi-AP environment, so I'm trying to at least gather information using free or cheap tools. I did a basic site survey using the free version of Ekahau HeatMapper and discovered the following in one of the conference rooms that has been a problem. The program picked up three access points (plus a bunch of others with much lower signals that were out of range): AP 1: SSID: "Unknown SSID" - Signal strength: -48 dBm - -40 dBm. Channel: 2 AP 2: SSID "CompanyMain" - Signal strength: -35 dBm or greater. Channel: 2. Security: WEP (This is the main SSID for the company's WLAN.) AP 3: SSID: "CompanyGuest" - Signal strength: -40 dBm - -35 dBm. Channel: 2. Security: WPA2 (This SSID is the company's "guest" WLAN, which was setup to allow Internet access, but prevent network access.) Is there anything that you see that is clearly a problem from the above? I'm assuming that the unknown SSID might be a big problem, and that it is an AP from a neighboring office that is causing interference. Does that seem likely? Also, regarding channel, should we try changing the channels of our APs to avoid interference with that unknown SSID? (Since everything seems to be on Channel 2?) Should our APs be on different channels? In other words, should the CompanyMain and CompanyGuest APs be on different channels? Finally, any recommendations for free/cheap tools to help me figure this out, and/or a good methodology to follow? Thanks in advance for any help. Jack

Read the article

Best way to attach 96 tb to workstation

- by user994179

I'm running a workstation with dual xeon 5690's (12 physical/24 logical cores), 192 gb of ram (ie, maxed-out), Windows 7 64bit, 5 slots for adapter cards, and 1 tb of internal storage, with 5 more internal bays available. I have an app that creates data files totaling about 88 tbs. These are written once every 14 months, and the rest of the time the app only needs to read them; and 95% of the reads are sequential reads of huge chunks of data. I have some control over how big the individual files are, but ideally they would be between 5 and 8 tbs. The app will be reading from only one drive at a time, and the nature of the data is such that if (when) a drive dies I can restore the data to a new disk from tape. While it would be nice to be able to use the fastest drive/controllers available, at this point size matters more than speed. After doing lots of reading, I am leaning toward buying a bunch of cheap 2tb drives and putting them into a bunch of cheap enclosures. All this stuff is going into my home office, so I need to avoid the raised floor/refrigerated approach. My questions: Is the cheap drive/enclosure solution the best one for this situation? Given the nature of the app and the way the data is used, does RAID make sense? If so, which one? For huge sequential reads, would Usb 3.0 and eSata be a wash performance-wise? For each slot available on the workstation, can I hook up an enclosure that can hold multiple drives? Or is it one controller per drive? If I can have multiple drives on one controller, am I essentially splitting the bandwidth (throughput)? For example, if I have a 12 bay enclosure, is the throughput of the controller reduced by a factor of 12? Are there any Windows 7 volume/drive/capacity limits I should be aware of? Thanks

Read the article

5GHz vs 2.4GHz dual band router, max mbps

- by Tallboy

I've done a fair amount of reading before posting this but there are a few things still unclear. I just bought a Netgear WNDR3700 N600. I understand that 5GHz offers more channels, less interference because of more available channels, wont interfere with a microwave and so on, and also has a shorter range. Currently, my router is broadcasting both signals (for my iPhone on 2.4, and my computer on 5) But my question is What is the max speed of 5GHz in mbps? In the router settings, it allows me to set '300mbps', but I keep reading online that the max is 54. Is this true? I noticed when I set up the router the default for 2.4 was set to 300 and the default for 5 was set to 54, so I changed both to 300. Is this fine as well? I don't see why it wouldn't be maxed out for both by default. On the box it says max rate of 300+300 so I assume this is correct, but it's throttled down so the router isn't stressing in case you have something streaming media 24/7 and slowing the internet down too. What is the max range of 5GHz? my apt is 780 square feet, and the router is in the main living room.

Read the article

During Vista Repair - No operating system is listed.

- by Jack Marchetti

After a Windows update, my brother's Gateway computer loads to the "Step 3 of 3: 0%" and reboots. Safe Mode does not work. I placed a Vista DVD in the drive, and re-booted. (Note, this is my Vista DVD, not the Recovery/System disc that would come with a computer. Gateway does not give you CD's anymore. I believe they store recovery on a partition, but that partition has been wiped out). I chose "Repair Your Computer" I get a dialog box, but no operating system is listed. I'm then prompted to "Load Drivers". What drivers am I supposed to be loading here and where from? I placed a CD in the drive to "load drivers" but I don't see my DVD drive listed. All I saw where X:/Sources along with several Removable Media slots that were empty. On another screen I tried Startup Repair, which didn't do anything. I attempted to use System Restore - but it doesn't detect the hard drive. I'm guessing that I'm missing some sort of SATA driver and that is why the hard disk is not being found. Any ideas on this?

Read the article

Replacing all disks in a non-OS RAID 5 volume

- by molecule

Hi all, We currently have a server with 8 x HDD slots. It is a HP DL380G5 with a P400 controller. 2 x HDD are in a RAID 1+0 config and this hosts the OS. 6 x HDD are in a RAID 5 config and holds an Oracle DB. Basically the RAID 5 volume is running out of space and we would like to swap all 6 with higher capacity disks. Excuse my ignorance as I am pretty new to this... I believe we will need to backup the data, delete the RAID volume, insert the new disks, recreate the volume, and restore the data. 2 questions: Do we need to worry about the OS partition or is it completely independent so we can simply take out the 6 and insert 6 new disks and get the controller to recognize the 6 new disks and form a new RAID 5 volume? We should not need to reinstall OS or Oracle correct? Since we are going to restore the data on the volume from another source (our vendor will take care of this) but we would like to keep the existing data on the 6 disks just in case we run into issues and want to fall back, is this possible? Thanks in advance.

Read the article

PC can't detect second RAM installed

- by kulwinder

I have PC with 512 MB RAM installed (motherboard manufacture MICRO STAR, chipset P4M800), pc was running very slow so I decided to upgrade the ram. I installed CPU-Z and check the ram installed on the machine, also had a look at the stick installed. 512 MB PC 3200 400 MHz DDR but my mother supports 200 MHz and it was working ok. So I bought 2GB which I checked on manual that it support upto 2 GB Ram. So I installed 2GB PC 3200 400 MHz same as the old one, I plugged in both eventhough motherboard only support upto 2 GB but system spec only shows 512 (deducts 64 MB shared vga memory) I checked on CPU-Z, it detects both, slot 1 512 MB, slot 2 2048 MB, comparing screen for both slots, both the same, volt 2.5, frequency 166 MHz and 200MHz, only difference on those is 2gb ram shows under timings table 133MHz 166 MHz and 200MHz but 512 MB shows only 166MHz and 200MHz. I checked on Google and can't seems to figure out whats wrong with it. If I only plug in 2GB. Pc doesn't boot up like ram not working.With only 512 MB plugged in seems ok. Please help.

Read the article

SSD seems dead after wakeup from Windows Sleep, BIOS stalls but doesn't find it anymore

- by Abel

The morning, the following scary scenario happened: I woke up my Windows system Typed in my username and got an error (something like "could not load security xxx", but unsure of exact wording) System auto-restarted after cliking OK It didn't boot up anymore to the SSD with Windows 7 OS (I have another disk I can boot to, but that doesn't see the disk either). Obviously, this happened right after I instantiated a backup procedure, which hasn't succeeded either. The BIOS can't find the drive when I connect to SATA. And it can't find the drive when I connect it to SAS. I have a Dell Workstation T7400, most recent BIOS (version A06), version of SAS Host Bus Adapter BIOS (HBA) is MPTBIOS 6.14.10.00 (2007.09.29) from LSI Logic Corp. Other findings: When connecting to SATA, the DELL Logo screen stays really long (5 minutes) and then at the end of POST it says that a drive is not found When connecting to SAS, the SAS HBA initializing phase takes long (2 minutes, against normally 15 seconds) When running Dell Diagnostics, it doesn't finish and gives the error Exception occurred in module MPCACHE.MDM file "IOAPICSP.ASM" line 1645. I contacted Dell. On their advice I tried different slots and different cables to no avail. I use an APIC battery power, spikes in the power are thus unlikely. My conclusion so far: the disk is dead. I need this disk very badly because it contains the last few days of important development of which not all code was checked in the moment this happened. Are there any ways to recover dead SSD drives? The drive is a new X25-M G2 160GB model SSDSA2M160G2GC 2.5" in an extension bay and has been running without issues for 3 months on SAS.

Read the article

Maximum limit of filepointer in php reached and not changeable

- by mlaug

I have a server with the current 5.3.x version installed. Since we are running a really simple and small server in php using sockets, that connects to a lot clients using sockets we need to raise the open file limit that has been already done on the server for the user, that runs the server #ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 29879 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 8192 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 29879 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited and we compiled php with --enable-fd-setsize=8192 still we are getting [19-Nov-2012 09:24:23 Europe/Berlin] PHP Warning: socket_select(): You MUST recompile PHP with a larger value of FD_SETSIZE. It is set to 1024, but you have descriptors numbered at least as high as 1024. --enable-fd-setsize=2048 is recommended, but you may want to set it to equal the maximum number of open files supported by your system, in order to avoid seeing this error again at a later date. once in a while in our logs. Anyone knows who to configure the unix server and php correctly to have that working? I found a bug, but that is related to 2006 and marked as "not a bug" https://bugs.php.net/bug.php?id=37025&edit=1

Read the article

Unable to specify parameters to cvlc in a script

- by VxJasonxV

I'm creating a script that issues a few curl commands in order to access a time-protected mms stream link, then set up a relay using cvlc (vlc's command line interface) for my own use on an unencumbered player. The curl aspect of this is working, as I can run as a browser and curl side by side and get the same access url. (It's time locked meaning the stream will work forever, but you have to connect quickly or the URL will time out.) The very end of the script prints the command I will run, which is then followed up by "exec $CMD". When I echo $CMD I get: cvlc --sout '#standard{access=http,mux=asf,dst=0.0.0.0:58194}' mms://[...] Manually Copy/Pasting this command in, verbatim, works perfectly fine, but as part of a script, the cvlc execution output says: [0x9743d0] main interface error: no suitable interface module [0x962120] main libvlc error: interface "globalhotkeys,none" initialization failed [0x9743d0] dummy interface: using the dummy interface module... [0xb16e30] stream_out_standard stream out error: no mux specified or found by extension [0xb16ad0] main stream output error: stream chain failed for `standard{mux="",access="",dst="'#standard{access=http,mux=asf,dst=0.0.0.0:58194}'"}' [0xb11cd0] main input error: cannot start stream output instance, aborting [0xb11f70] signals interface error: Caught Interrupt signal, exiting... Why is --sout behaving one way in a script (non-interactive shell?) vs. another way in the foreground (interactive shell) ?

Read the article

Possible boot conflict?

- by Evan Kroske

I was installing Ubuntu on a computer on which Windows XP was already installed. The computer has multiple hard drive bays, so I decided to remove the XP HDD and install Ubuntu on a blank HDD when it was the only HDD in the system. Unfortunately, if I now try to boot Ubuntu with the Windows XP drive in the second slot, nothing will boot. However, if Windows XP is in the first slot, it will boot fine. Can anybody explain why this happens? When I was checking out the BIOS to see if something was messed up, I discovered that when Ubuntu is in the first slot, the BIOS doesn't recognize any HDDs. However, if XP is in the first slot, the BIOS recognizes both drives. Any hypotheses about why this happens? Edit: Here's the setup. I have an old server with seven SCSI HDD slots. I have five identical 68 Gb SCSI drives, but I can keep only two plugged in. XP is still installed on the first drive, but I reinstalled Ubuntu on the second drive and had Grub overwrite the XP bootloader on the first drive. Now, the setup works fine, and I can use Grub to load either XP or Ubuntu. However, if I plug in another identical blank HDD in the third slot, the computer recognizes only the XP drive and doesn't boot. Grub starts to load, then gives me a "disk not found" error. Running ls from the grub rescue prompt only shows one drive with two partitions. I guess this is a BIOS problem, but I'd still like to know what triggers it. What about a blank drive could cause the BIOS to freak out?

Read the article

Anyone know a good mind mapper that works with a scheduler?

- by GLycan

TL;DR: Mind mapping tasks to be processed into a schedule based on task metadata. I have all sorts of ideas about what to invest resources (mainly time) in, but when I actually have time to do something I useually end up browsing reddit for not knowing what do to, and the frequancy with which I forget deadlines scares me. I'd love to bring order and structure into my mind, and always know what to do next. So, I want a mind mapping app, where I'd give each branch (types and subtypes of things I want to do) a importance score (if there were two branches, and one had 60 while the other 40, they would respectivily get 60% and 40% of the parent's importance, with the root being 100) and a how soon that branch should be revised/updated (an hobby I want to try out might be checked, say, once a week, while a school subject should be checked once a day) and give each leaf (something I want/need to do) how much time it takes, deadline (if any), and optionally an absolute importance, reoccurrence (guitar practice might repeat once a week), and prerequisites (reading something requires that book (although that could be brought somewhere), coding requires a box, jogging requires being outside) and maybe some other flags, like if it's enjoyable or not. It should either be packaged or working with a schedular app, to which I'd say, look, my day works this way (completely busy from 8 to 9:15, then 15 minutes of being inside with nothing, ..., two hours with box and possibility to go outside, etc), saying that such-and-such pattern is school and happens ever weekday except such-and-such days. The output should be of the form of a schedule, fit for printing or, when I finally get an android, mobile viewing, that schedules tasks with regards to availability of resources and importance (importance being derived from the leaf-task's parent branches), and the set of flags (all work and no play makes me a dull boy). One of these tasks should be reviewing anything that should be updated on that day, including future day layouts (e.g, if the time slots of future days have changed. This should be done every day.) Does anyone know some collection of preferably open-source (or free, or pirateable) tools, or better yet a single one, that accomplishes this task? I know python pretty well, and should be able to write any necessary glue.

Read the article

Motherboard running rather hot while gaming

- by I take Drukqs

Case: Antec 1200 Mobo: Gigabyte GA-X58A-UD3R CPU: Intel i7 950 (stock cooler) GPU: EVGA GeForce 570 GTX RAM: 2x 2 GB (4 GB total) DDR3 dual-channel Corsair OS: Windows 7 Home Premium 64-bit This is my first build and it's brand new. I had no problems putting it all together in a few hours one evening and I consider myself to be pretty good with computers. Not to brag or anything like that! Just saying I've been fiddling with them since I was in diapers and I have a good amount of experience under my belt, just not with certain things yet. Recently while playing many of the latest games maxed out without a hitch my motherboard has been running hot and like anyone who's ever built a computer it scares the life out of me. I checked HWMonitor and saw that my motherboard sometimes reached temperatures of around 52 - 78c (the number 78 obviously being what's scaring me). I was wondering if such a temperature is normal and if not what the problem could be. Air flow in my case is phenomenal and besides having to ship back a faulty GPU and reseat my CPU my first build has been a very large success which I am enjoying tremendously. There is literally almost no dust in my case due to it being very new as previously mentioned and my RAM sticks are in the correct slots for dual-channel mode. My cable management is pretty great in my opinion with only cables from my PSU lingering in the bottom of the case. At any given opportunity I ran my cables behind my mobo. Air flow should definitely not be a problem because my CPU only goes up to about 60c and my GPU only goes up to about 80c. Thank you very much in advance.

Read the article

How can I get Windows 7 to work with two Nvidia graphics cards with different drivers?

- by Max

This is similar to this question, but I am using more similar cards with Windows 7. I just purchased a Zotac Nvidia GeForce 7200 GS. I have a motherboard with two PCI Express x16 slots. There is already an MSI Nvidia GeForce 8800 GTS being used as the primary card, driving two LCD monitors. I would like the Zotac to output to a TV via DVI-out. Unfortunately, when Windows detects the Zotac and installs its drivers, or I manually install them, Windows stops being able to boot up. If I remove them and re-install the MSI 8800 drivers, I can boot again, but Windows can no longer see the Zotac 7200--it shows up as a yellow triangle in Device Manager. I've read conflicting reports about this. Some people claim that Windows 7 will support multiple heterogeneous graphics card drivers, as long as they are all using the same driver API ("WDDM?"). Others say that they have to be using the exact same driver, or it won't work. Others claim that you have to use the exact same card. which is it, exactly? I know I can run the MSI 8800 in SLI if I purchase another, but I don't need that kind of power--I just need HD-out to my television. I read somewhere that running two cards in SLI precludes you from using 100% of their output ports, so I'm not sure if that's an option. I suppose I could also run two MSI 8800's without SLI, but again, that's more power than I need (and more money than I'd like to spend). Also, I don't think this exact model is even manufactured anymore. Any ideas?

Read the article

Piecing together low-powered hardware for an RS-232 terminal server

- by Fred

I'm working on reconstructing my Cisco lab for training/educational purposes and I found that the actual terminal server I have is dead. I have a couple of 8-port PCI serial cards which would be more than ample for my lab, but I don't want to leave my personal computer running to be able to access the console ports. Ideally I would access the terminal server remotely, either by SSH/RDP to the box (depending on what OS I go with) or by installing a software package that allows me to telnet directly to a serial port. I know I've found a program that does this under Linux in the past but its name escapes me at the moment. I'm thinking about scavenging for some old hardware, on eBay or something, to put together a low-powered PC. Needs to be something that: Has Low-power consumption Has at least 2 PCI slots (though I certainly wouldn't complain about having more) Has onboard Ethernet (or, if not, another PCI or ISA slot (not shared)) Can be headless once an OS installed (probably Linux) I'm currently leaning towards an old fashioned Pentium (sub-133MHz era) but I am wondering if anybody else knows of another platform/mobo that would suit these needs. Alternatively, I've been considering buying a Raspberry Pi and a big USB hub along with a bunch of USB-Serial adapters but this sounds like it'd get messy quick with cables and adapters all over the place, and I may not even have the same ttyS#'s between boots.

Read the article

Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

- by WerkkreW

Hello - I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified with SpeakEasy and Speedtest.net) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

Read the article

hp DL380 G4 won't boot with disk plugged into front USB

- by Kev

We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the BIOS (which is current, BTW) and never boot, even though the USB disks are not "bootable" per se. Our old drives did not exhibit this behaviour (so I don't think it's this type of issue that I've read about other servers.) The old drives were USB 2.0, but this shouldn't make a difference, AFAICT--the specs say all of the G4's USB ports are the same, 2.0, anyway, so I'm not sure how one port would handle a USB 3.0 device better than another. If we plug the new drives in one of the back slots, it boots fine. What's the cause? My concern is that the front USB port, and possibly the motherboard, might be starting to die. (We are experiencing other strange issues with them, or were initially, like intermittent file permissions errors despite wide-open ACL on these local drives, but some serverfault users have me convinced they may be coincidental software/security related issues.)

Read the article

New to building computers worried about temps

- by dave

I'm new to building my own computers and I was wondering about maximum temperatures. I understand that the room temp can affect the computers temp but how relevent is it? I understand that if my room temp is 20°C none of my computer parts could be lower than that. But if my room is 27°C instead of 20°C would this cause my computers parts to heat up more/faster? My new computer I built myself for gaming is i7 2600k 16gb ram ddr3 1600 hd6970 2 gb 240gb ssd ( bought a nas with 3 2tb drives in raid 5 for my home network ) 850w modular psu I also have my old hp computer i3 2120 8gb ram hd6770 1tb hdd I also have 3 laptops in my household, but I am not worried about their temps, they heat up my legs but they are never under stress. Due to size and money reasons I used an old case and it only has one of the sides left on it. Is this bad for the computer and will the extra dust cause problems? Or should I leave it this way or take the missus wrath and buy a case? If so is there any certain case I should get? I don't care about looks I just want card reader and usb slots and for it to run as cool or cooler than now, my case has 1 fan. Also what are the max temps for my new and old computer parts? Is 40°C under load ok for my CPU, what about 70°C for my GPU is that ok too, or should I worry? What are normal and safe temps for my components? I have looked around but there seem to be lots of different answers. I know that 100°C is bad but I want my parts to last as long as possible and this site always seems to give good replies without arguing or flaming.

Read the article

Unable to run cvlc in a script

- by VxJasonxV

I'm creating a script that issues a few curl commands in order to access a time-protected mms stream link, then set up a relay using cvlc (vlc's command line interface) for my own use on an unencumbered player. The curl aspect of this is working, as I can run as a browser and curl side by side and get the same access url. (It's time locked meaning the stream will work forever, but you have to connect quickly or the URL will time out.) The very end of the script prints the command I will run, which is then followed up by "exec $CMD". When I echo $CMD I get: cvlc --sout '#standard{access=http,mux=asf,dst=0.0.0.0:58194}' mms://[...] But the cvlc execution output says: [0x9743d0] main interface error: no suitable interface module [0x962120] main libvlc error: interface "globalhotkeys,none" initialization failed [0x9743d0] dummy interface: using the dummy interface module... [0xb16e30] stream_out_standard stream out error: no mux specified or found by extension [0xb16ad0] main stream output error: stream chain failed for `standard{mux="",access="",dst="'#standard{access=http,mux=asf,dst=0.0.0.0:58194}'"}' [0xb11cd0] main input error: cannot start stream output instance, aborting [0xb11f70] signals interface error: Caught Interrupt signal, exiting... Why is it ignoring my --sout input?

Read the article

What are the frequencies of current in computers' external peripheral cables and internal buses?

- by Tim

From Wikipedia, three different cases of current frequency are discussed along with the types of cables that are suitable for them: An Extra Ordinary electrical cables suffice to carry low frequency AC, such as mains power, which reverses direction 100 to 120 times per second (cycling 50 to 60 times per second). However, they cannot be used to carry currents in the radio frequency range or higher, which reverse direction millions to billions of times per second, because the energy tends to radiate off the cable as radio waves, causing power losses. Radio frequency currents also tend to reflect from discontinuities in the cable such as connectors, and travel back down the cable toward the source. These reflections act as bottlenecks, preventing the power from reaching the destination. Transmission lines use specialized construction such as precise conductor dimensions and spacing, and impedance matching, to carry electromagnetic signals with minimal reflections and power losses. Types of transmission line include ladder line, coaxial cable, dielectric slabs, stripline, optical fiber, and waveguides. The higher the frequency, the shorter are the waves in a transmission medium. Transmission lines must be used when the frequency is high enough that the wavelength of the waves begins to approach the length of the cable used. To conduct energy at frequencies above the radio range, such as millimeter waves, infrared, and light, the waves become much smaller than the dimensions of the structures used to guide them, so transmission line techniques become inadequate and the methods of optics are used. I wonder what the frequencies are for the currents in computers' external peripheral cables, such as Ethernet cable, USB cable, and in computers' internal buses? Are the cables also made specially for the frequencies? Thanks!

Read the article

ubuntu dmidecode is not functioning properly

- by Alaa Alomari

dmidecode is giving irrelevant and conflicted results. it shows that i have two slots while the correct is 8 (the board is Tyan S5350.) uname -a Linux synd01 3.0.0-16-server #29-Ubuntu SMP Tue Feb 14 13:08:12 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux root@synd01:/home/badmin# dmidecode -t 16 dmidecode 2.9 SMBIOS 2.33 present. Handle 0x0011, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 while root@synd01:/home/badmin# dmidecode -t 17 | grep Size Size: No Module Installed Size: No Module Installed Size: 1024 MB Size: 1024 MB Size: No Module Installed Size: No Module Installed Size: 1024 MB Size: 1024 MB also lshw shows: *-memory description: System Memory physical id: 11 slot: System board or motherboard size: 4GiB *-bank:0 description: DIMM DDR Synchronous 166 MHz (6.0 ns) [empty] physical id: 0 slot: J3B1 clock: 166MHz (6.0ns) *-bank:1 description: DIMM DDR Synchronous 166 MHz (6.0 ns) [empty] physical id: 1 slot: J3B3 clock: 166MHz (6.0ns) *-bank:2 description: DIMM DDR Synchronous 166 MHz (6.0 ns) physical id: 2 slot: J2B2 size: 1GiB width: 64 bits clock: 166MHz (6.0ns) *-bank:3 description: DIMM DDR Synchronous 166 MHz (6.0 ns) physical id: 3 slot: J2B4 size: 1GiB width: 64 bits clock: 166MHz (6.0ns) *-bank:4 description: DIMM DDR Synchronous 166 MHz (6.0 ns) [empty] physical id: 4 slot: J3B2 clock: 166MHz (6.0ns) *-bank:5 description: DIMM DDR Synchronous 166 MHz (6.0 ns) [empty] physical id: 5 slot: J2B1 clock: 166MHz (6.0ns) *-bank:6 description: DIMM DDR Synchronous 166 MHz (6.0 ns) physical id: 6 slot: J2B3 size: 1GiB width: 64 bits clock: 166MHz (6.0ns) *-bank:7 description: DIMM DDR Synchronous 166 MHz (6.0 ns) physical id: 7 slot: J1B1 size: 1GiB width: 64 bits clock: 166MHz (6.0ns) what might cause this conflict and how can i fix it? Thanks

Search Results

Search found 905 results on 37 pages for 'signals slots'.

Page 27/37 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34 | Next Page >

- by Mr.Student

- by watain

- by user29336

- by jwir3

- by The Wolf

- by Jack

- by user994179

- by Tallboy

- by Jack Marchetti

- by molecule

- by kulwinder

- by Abel

- by mlaug

- by VxJasonxV

- by Evan Kroske

- by GLycan

- by I take Drukqs

- by Max

- by Fred

- by WerkkreW

- by Kev

- by dave

- by VxJasonxV

- by Tim

- by Alaa Alomari

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34 | Next Page >