Search Results

Search found 905 results on 37 pages for 'signals slots'.

Page 29/37 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Frequency of RAM

  - by Vignesh Palani

  I have a very old system hp compaq dx2080. It had 1gb of RAM. I recently bought a EVM DDR2 1 GB PC RAM which had a clock rate of 667Mhz. I have dual booting windows 7 and 8. When I installed it, windows 7 was still using the older 1gb. It showed as 2 gb available and 1gb usable in system properties. I searched around and found that I can change it to max in the msconfig. I did so. I set it 2048. Still, it was using only 1gb. When, I switched to 8, it was using the 2gb. Now, for my question: My system only supported 553Mhz and 667Mhz RAM. In the BIOS, I saw that the new RAM was showing as 800Mhz. Rechecked using speccy and cpu-z. It showed different values between the two. The RAM is labeled as 667Mhz over it. No mistake in that. But, am I missing something? Please help. And, can I continue using it? My point again. There are only two slots.

  Read the article

• What differences are there between "home" switches and "professional" switches?

  - by pjreddie

  Our radio station uses a PtP wireless system to stream our radio and TV signals from our studio up a hill to our transmitter. We have been having problems with warbly sound and drop outs that come from some point in this system. An engineer that occasionally visits the station thinks it could be the switches we use on each side of the PtP wireless system to connect the PtP devices to the encoders and decoders and wants us to get two of these switches: http://www.amazon.com/Netgear-JGS516-ProSafe-16-Port-Ethernet/dp/B0002CWPOK/ref=dp_return_1 The encoder/decoder setup only streams 8Mbps total so it seems like the switches we have should not be stressed out, unless they are causing sufficient latency to degrade the performance of the encoder/decoder. At each end of the connection we only have 4 connections, is there any reason we couldn't get a cheaper, "home" quality switch like this: http://www.amazon.com/D-Link-DGS-1005G-5-Port-Gigabit-Desktop/dp/tech-data/B003X7TRWE/ref=de_a_smtd Is there a significant difference that we would notice in terms of latency between these two switches? How much does the quality of the switch actually matter in this scenario? Any help is appreciated, feel free to ask questions if anything needs clarification. Thanks

  Read the article

• Configuring two nearby WLANs: should I use the same ssid?

  - by Rory

  I'm configuring a home network for basic internet use (ie don't really need connectivity between workstations on the network). My brick walls mean a single wireless router doesn't provide good coverage throughout the house, so I have purchased two powerline adapters and now have the incoming modem/wireless router at one end of the house plugged into a powerline adapter, and at the other end of the house the other powerline adapter plugged into another wireless router. Currently the two wireless networks have different ssids. (The powerline adapters only do power-Ethernet; they're not wireless access points themselves.) This works well, except when I move between rooms and would ideally like my devices (iPad, phones, laptops) to switch from the weak to the strong signal. Sometimes there's enough signal that they hold on to the weak connects instead of switching to the strong one. Should I name the two networks the same ssid, and if so what is the actual effect? Do the signals get confused, is the bandwidth affected, will this help my devices seamlessly move from one to the other, or is the ssid just a cosmetic thing that actually doesn't have any impact on this situation? Are there any other settings that I should configure to make my setup optimal?

  Read the article

• A switch and router between the printer and PC that want to print but cannot

  - by Robert Memo

  IP 192.168.1.5 has a wireless connection to a Linksys router (192.168.1.1) which then is connected to a switch. The switch is connected to a server (192.168.0.2). My printer has IP address of 192.168.0.8. Internet connection is fine on 192.168.1.5. Problem 1: IP 192.168.1.5 can not print using printer 192.168.0.8. Problem 2: IP 192.168.1.2 can not access a shared folder on the the server. The reason for connecting this way is that, the server does not release wireless signal. In order to get wireless signal the Router is connected to the switch. The server is a computer server that only has one outgoing LAN port. Plus, due to inconvinience physical locations, I do not have option to change the physical locations and the way it is connected already. I just want the labtops that only have wireless connection to communicate with the printer and the server. I have tried to change the router IP address to 192.168.0.x like the server and printer. It caused problem for the laptop. The router no longer release internet signals. The router does have IP address from the server 192.168.0.5.

  Read the article

• Why just splitting an Ethernet cable does not work?

  - by Sin Jeong-hun

  I thought the Ethernet is logically one-line communication bus (for argument's sake, I am excluding hubs). All machines attached in the bus hears the same signals and the machines themselves try to avoid collisions by randomly backing off. http://computer.howstuffworks.com/ethernet6.htm If so, why splitting one Ethernet line from my home router into two and connecting two computers would not work? Why do I have to add a switch to it? *What the Internet said would not work. [4 port home router] ------[one Ethernet cable]-----[simple splitter]======[two computers] *What the Internet said I should do [4 port home router] ------[one Ethernet cable]-----[switch]======[two computers] Is this because of the signal degradation (reduced electric current)? Thank you for all the answers! The reason why I did not just use the two ports of my home router is... The 4-port gigabit router is in my room and I had put a computer in another room (also my room, though). Since wired network is far more reliable and secure, I had bought a long Ethernet cable and and connected the computer to the router. Now I was thinking about adding another computer to that room. I could buy another long Ethernet cable, but then there will be two cables between the rooms. The one line already is a minor annoyance, so I thought if I could share the one line between the two computers in that room. A switch would work, but it requires power and is a little bit pricey. That is why I wondered why it would not work to simply split the physical Ethernet cable. Apparently I do not completely understand how Ethernet and a switch work. I just have some bit of knowledge I heard in my college class.

  Read the article

• Computer Won't Boot Properly, unless in safe mode?

  - by Mr_CryptoPrime

  I bought a computer today and booted it up, but when I did I only got a blank screen. I checked to make sure it wasn't the monitor by connecting it to my old computer...it worked. I then tried connecting my monitor to both DVI ports and found that the bottom one did work. However, now it just boots up and says "loading windows" and then when the login screen is suppose to come up the screen just goes blank and monitor says "no input, check cord" (or something like that). I tried reinstalling windows and then I was able to log on normally. I used the CD's and reinstalled all the drivers, then rebooted...now I am stuck right back where I started. I tried taking out the RAM and inserting into different slots, that didn't fix anything. I was able to boot up into windows using safe-mode. I suspected that my ATI Radeon 6950 was the issue and downloaded the drivers, but I can't install them on safe-mode. Someone said to install C++ distr. and I tried doing that to fix driver installation problem of "failed to load detection driver" but it wouldn't let me do that either. Please someone help me, I don't want to have to deal with the evil redtape of sending it back to get a replacement! My computer: -Content--text-_-"http://www.newegg.com/Product/Product.aspx?Item=N82E16883229236&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel--Content--text-_- Driver detection problem: http://www.hardwareheaven.com/hardwareheaven-tools-discussion/174912-failed-load-detection-driver-installation-error.html Driver download page: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1 I am using windows 7. Thanks again.

  Read the article

• Installing a new Motherboard in a HP xw6200 case

  - by thing2k

  I have a HP xw6200 Workstation, that is rather long in the tooth, and with 2 physical CPUs, it is quite inefficient. So, the plan was to upgrade the internals. Nothing special: AMD Athlon II X4 640 ASUS M4A78KT-M LE (mATX) 2x 2GB DDR3 1333MHz RAM. 3p under my £150 budget The issues: The pin connector for the front panel isn't a good fit, but I can trim it to size. The PSU has a 8-Pin Power connector, unsurprisingly, the new board has a 4 pin socket. The pins do line up, but I would have to cut it in half to fit. Finally, due to the weight of heat-sinks, they are screwed directly into the case. It turns out that these screws also lock the motherboard in place. As to remove it, you remove the heat-sinks, slide the motherboard across and lift it out. I tested the new board for fit, and while it slots in fine, it's not secure. There is nowhere to screw the board down, it is just held in place with plastic standoffs. The only idea I had, was to wedging something between the side of the motherboard and part of the case. Any suggestions?

  Read the article

• Wifi antenna extension with F-connector/RG-6(RG-59) cable?

  - by rjz2000

  In an older house, the wire mesh in walls surrounding the furnace behave like a Faraday cage and block wifi signals. It is also difficult to lay new cable, however there is television cable to multiple locations due to there once having been a roof-installed, television antenna. It would be relatively trivial to install the wifi router at the center distribution point, then have the antenna broadcasting/receiving the signal plugged in at each of the old television outlets. I assume that it would not be too difficult to find an adapter for SMA <- F-type connectors. The cable is actually RG-59 rather than RG-6, but I assume that it still has relatively good RF isolation along its length, which is no more than a couple hundred feet in any direction. Does anyone know a problem with the idea? Will a router get confused if there is /too little/ interference between the two antenna? Is that length of cable (~100ft) too long for the signal a router broadcasts? I have seen that it is also possible to use old ~$30/each FiOS cable modems available on eBay to extend a network over television cable. However, that seems like a less elegant solution, and might interfere with upnp and dlna services I'd like to have work on a single network. Thanks if anyone has answers or suggestions before I try this project!

  Read the article

• Expand a volume residing on one X-RAID disk installed on a Netgear ReadyNas Duo v2

  - by Sid

  I've got a Netgear ReadyNas Duo v2 (2 disk slots). System is configured with X-RAID which does not provide flexibility but automatically expands based on a sort of RAID-5 logic. I had 2 500 GB hard disk installed, redundant, so I had 500 GB of volume size. I wanted to upgrade the whole system to 3 GB * 2 hard disk maintaining both the data already on the NAS and the data on one of the two 3 TB hard disks. So I did this: Unplugged one disk from the ReadyNas. Now the readynas has 1*500 GB non redundant. Plugged one empty 3 TB hard disk. Now the readynas has 1*500 GB + 1*3 TB, redundant. I waited for the resync. I then unplugged the 500 GB hard disk, so that I have only the 3 TB hard disk with the previous data. Now what I want is to copy the data on my other 3 TB hard disk in the NAS, so that I can plug this other disk in the NAS and use it for redundancy. The problem is that: the NAS has the (single) 3 TB hard disk in X-RAID, but the volume does not expand to 3 TB, it remains fixed to 500 GB. Is there a way to tell the ReadyNas to force expanding the volume to the whole disk without plugging in another hard disk of the same size?

  Read the article

• Eee PC 1015BX ram compatibility?

  - by AdrianaMX

  Asus Eee PC 1015BX Operating System Windows 7 Starter, 32bit CPU AMD Fusion APU C60 1.0GHz (dual core) Processor Graphic AMD Radeon HD 6290 (256 MB Shared) Memory DDR3, 1 x SO-DIMM, 1GB I have upgraded the preloaded "Windows 7 Starter" to "Windows 7 Professional" I want to upgrade the ram, from 1gb (factory) to 4 gb. What should i buy? SODDR3, 4GB, 1066MHZ, PC3-8500, 204PIN? or SODDR3, 4GB, 1333MHZ, PC3-10666, 204PIN? I already know that Windows 7 32-bits can't handle 4gb, only 3gb (but 3gb is better than one stick of 2gb). ASUS send me this link, but i think they are wrong, (or Insufficient Information for me) http://www.kingston.com/us/memory/search/Default.aspx?DeviceType=3&Mfr=ASU&Line=Eee%20PC&Model=71404 Thank you. CPU-Z Chipset Memory Type DDR3 Memory Size 750 MBytes Memory Frequency 532.2 MHz (3:16) CAS# latency (CL) 7.0 RAS# to CAS# delay (tRCD) 7 RAS# Precharge (tRP) 7 Cycle Time (tRAS) 20 Bank Cycle Time (tRC) 27 Memory SPD NO INFO AIDA64 North bridge Properties North bridge AMD K14 IMC Supported Memory Types DDR3-800, DDR3-1066 SDRAM Memory Slots DRAM Slot #1 1 GB (DDR3 SDRAM) Integrated Graphics Controller Graphics Controller Type AMD Radeon HD 6290 (Wrestler) Graphics Controller Status Enabled Graphics Frame Buffer Size 256 MB

  Read the article

• External HDD connecting via USB disconnects wireless LAN connection

  - by Kensai

  Strange problem. I have this MEDION Akoya PC that has a dedicated bay to slide an external HDD sold separately. It's very handy indeed cause the slot is providing a fast USB 3 connection and power to the HDD unit, without extra cables. All works fine except this show-stopper behavior to disconnect me from the router once I slide in the unit and it powers up. The moment I connect the unit the (normally) three-four WiFi connections I see in my neighborhood disappear and my own to the router loses its signal strength (no Internet traffic is possible). After a while it throws me off that one as well, never to connect me again as long as the unit is powered. Once I disconnect the HDD the various signals come back and it automatically reconnects to my own. What takes? Are we in front of a serious design fault by MEDION here? Does the spinning of the HDD on top of the PC cause electromagnetic interference strong enough to throw off my WiFi connectivity? Is it a simple USB problem? Some kind of strange hardware conflict? Where should I look?

  Read the article

• Toshiba Satellite C665 Rebooting from Standby

  - by Coodu

  I currently am working on a C665 with a strange issue. When the panel is closed the notebook will put itself to sleep in the usual way, and the power LED changes to the pulse to indicate that the device is asleep. However, when the panel is opened to resume using the notebook, the system will restart itself, instead beginning from the Toshiba logo and proceed to boot back in to W7. I should also note that each time this occurs, the "Windows Startup Recovery" option occurs, indicating that the system was not shut down correctly. Some things I have tried: Updated to latest Toshiba BIOS. Returned BIOS settings to their defaults. Swapped Memory to known good module, tested KGM in both memory slots within system. Confirmed that power settings are set to sleep/wake when power button is pressed. Ran a quick HDD fitness test using a parted magic USB stick. Checked for BSOD logs using BlueScreenView, none found. Ran src, no violations found. Any ideas? I have a good feeling the system is restarting itself, but in the event viewer there is a "Kernel Power" error, but it simply says "The system was not shut down correctly." Perhaps a bad driver? I'm not sure. Any advice would be great.

  Read the article

• SQL Server: Network pauses after installing cheap SATA card: Is there a solution?

  - by samsmith

  At the risk of being assigned to the "bad DBA" club... I did something desperate, and may have to undo it. Problem: After installing a low cost eSATA board, my SQL Server is intermittently unresponsive (seemingly when there is a lot of IO to the eSATA drive). Questions: 1) Is there a solution to the intermittent unresponsiveness that allows me to keep the eSATA in place? 2) Whether or not (1==true): What is a decent, low cost way to add 1-3 TB storage to SQL for non-critical SQL DBs? Detail: Our SAN is full, and expanding it is costly and will take a month. I have a pressing need to add 1-3 TB for some development DBs (e.g. not mission critical; data loss is OK). As a bandaid, I threw a $20 eSATA PCI board in the Dell 1950 server, and attached an external 2TB eSATA drive. This seemed to work fine, but I notice that our production SQL DBs, and even remote desktop, now experience network "pauses" that they never did before (with both SQL client apps and remote desktop throwing "networking problem" errors). This SQL Server has lots of memory, and runs an instance of SQL 2005 (where all line of business apps reside) and an instance SQL 2008 (for development db's). SQL Server RAM has been appropriately configured, and this setup has run great for years. The server is: Dell 1950 Win2003 x64 14GB RAM PERC controller, 2 mirrored hd's internal Dell SAN over gbit ethernet, dual homed 2 PCIx slots (1 used by NIC for SAN, 1 now in use for eSATA board) Thank you for suggestions!

  Read the article

• Data recovery on working hard drive

  - by emgee

  So I have a 5 bay hot swap SATA enclosure that's connected to a Silicon Image-based SATA adapter in a computer. It's running XP Pro. There are two 1.5TB hard drives in slots 1 and 2 respectively, set up using RAID 1 using the the Silicon Image utility. There are also two 1TB drives in bays 3 and 4, also set to RAID 1 the same way. The partitions for both RAID arrays are Dynamic partitions. A few days back, there was a bare hard drive that needed some files copied off of, so it was popped it in bay 5, that bay to pass-through, and the copied data off of it. Later, I noticed that my 1.5TB drives no longer showed up in windows. In the Silicon Image utility, the drives showed up fine, no error. However, in Device Manager, it shows the RAID 1 array as uninitialized. It shows up as the right size, etc., but nothing else. There's no sign of anything wrong with either drive, so I'm not sure what happened exactly. I'm not the only one who has access to that computer, so it is possible there is something else done to it that I don't know of. There's quite a lot of data on it still, and if at all possible, I'd prefer to not send it to Ontrack. Does anyone know of software that would restore the partitions, keeping in mind that it's a Windows LDM partition? I have access to a variety of Operating Systems, so something that would work on Mac, Windows or Linux would be acceptable. The programs I usually use are not compatible with LDM.

  Read the article

• PCI-E riser card prevents server from starting at all

  - by user68623

  I need to replace the RAID controller in a server, and the new one is PCI Express while the old one was 64bit PCI. The server has both slots, but the riser card that was installed does not contain the PCI Express part. So I bought a new 4x PCI Express riser card (Delock 89103), but the moment I put it into the slot the server does not start up at all. It does not even get to POST, at most the power LED flashed once but nothing else happens at all. It does not power up the server at all. If I remove the riser card it starts up fine. If I put the riser card into a regular desktop computer it seems to work in general. Is there anything else I have to pay attention to when buying a riser card? My naive assumption would be that any PCI Express riser card should work. Or is my riser card likely to be damaged or out-of-spec and the server is just more picky? How do I get it to work, or how can I at least find a riser card that will work with my server? The server mainboard is a Super Micro PDSMi+.

  Read the article

• Dealing with external processes

  - by Jesse Aldridge

  I've been working on a gui app that needs to manage external processes. Working with external processes leads to a lot of issues that can make a programmer's life difficult. I feel like maintenence on this app is taking an unacceptably long time. I've been trying to list the things that make working with external processes difficult so that I can come up with ways of mitigating the pain. This kind of turned into a rant which I thought I'd post here in order to get some feedback and to provide some guidance to anybody thinking about sailing into these very murky waters. Here's what I've got so far: Output from the child can get mixed up with output from the parent. This can make both outputs misleading and hard to read. It can be hard to tell what came from where. It becomes harder to figure out what's going on when things are asynchronous. Here's a contrived example: import textwrap, os, time from subprocess import Popen test_path = 'test_file.py' with open(test_path, 'w') as file: file.write(textwrap.dedent(''' import time for i in range(3): print 'Hello %i' % i time.sleep(1)''')) proc = Popen('python -B "%s"' % test_path) for i in range(3): print 'Hello %i' % i time.sleep(1) os.remove(test_path) I guess I could have the child process write its output to a file. But it can be annoying to have to open up a file every time I want to see the result of a print statement. If I have code for the child process I could add a label, something like print 'child: Hello %i', but it can be annoying to do that for every print. And it adds some noise to the output. And of course I can't do it if I don't have access to the code. I could manually manage the process output. But then you open up a huge can of worms with threads and polling and stuff like that. A simple solution is to treat processes like synchronous functions, that is, no further code executes until the process completes. In other words, make the process block. But that doesn't work if you're building a gui app. Which brings me to the next problem... Blocking processes cause the gui to become unresponsive. import textwrap, sys, os from subprocess import Popen from PyQt4.QtGui import * from PyQt4.QtCore import * test_path = 'test_file.py' with open(test_path, 'w') as file: file.write(textwrap.dedent(''' import time for i in range(3): print 'Hello %i' % i time.sleep(1)''')) app = QApplication(sys.argv) button = QPushButton('Launch process') def launch_proc(): # Can't move the window until process completes proc = Popen('python -B "%s"' % test_path) proc.communicate() button.connect(button, SIGNAL('clicked()'), launch_proc) button.show() app.exec_() os.remove(test_path) Qt provides a process wrapper of its own called QProcess which can help with this. You can connect functions to signals to capture output relatively easily. This is what I'm currently using. But I'm finding that all these signals behave suspiciously like goto statements and can lead to spaghetti code. I think I want to get sort-of blocking behavior by having the 'finished' signal from QProcess call a function containing all the code that comes after the process call. I think that should work but I'm still a bit fuzzy on the details... Stack traces get interrupted when you go from the child process back to the parent process. If a normal function screws up, you get a nice complete stack trace with filenames and line numbers. If a subprocess screws up, you'll be lucky if you get any output at all. You end up having to do a lot more detective work everytime something goes wrong. Speaking of which, output has a way of disappearing when dealing external processes. Like if you run something via the windows 'cmd' command, the console will pop up, execute the code, and then disappear before you have a chance to see the output. You have to pass the /k flag to make it stick around. Similar issues seem to crop up all the time. I suppose both problems 3 and 4 have the same root cause: no exception handling. Exception handling is meant to be used with functions, it doesn't work with processes. Maybe there's some way to get something like exception handling for processes? I guess that's what stderr is for? But dealing with two different streams can be annoying in itself. Maybe I should look into this more... Processes can hang and stick around in the background without you realizing it. So you end up yelling at your computer cuz it's going so slow until you finally bring up your task manager and see 30 instances of the same process hanging out in the background. Also, hanging background processes can interefere with other instances of the process in various fun ways, such as causing permissions errors by holding a handle to a file or someting like that. It seems like an easy solution to this would be to have the parent process kill the child process on exit if the child process didn't close itself. But if the parent process crashes, cleanup code might not get called and the child can be left hanging. Also, if the parent waits for the child to complete, and the child is in an infinite loop or something, you can end up with two hanging processes. This problem can tie in to problem 2 for extra fun, causing your gui to stop responding entirely and force you to kill everything with the task manager. F***ing quotes Parameters often need to be passed to processes. This is a headache in itself. Especially if you're dealing with file paths. Say... 'C:/My Documents/whatever/'. If you don't have quotes, the string will often be split at the space and interpreted as two arguments. If you need nested quotes you can use ' and ". But if you need to use more than two layers of quotes, you have to do some nasty escaping, for example: "cmd /k 'python \'path 1\' \'path 2\''". A good solution to this problem is passing parameters as a list rather than as a single string. Subprocess allows you to do this. Can't easily return data from a subprocess. You can use stdout of course. But what if you want to throw a print in there for debugging purposes? That's gonna screw up the parent if it's expecting output formatted a certain way. In functions you can print one string and return another and everything works just fine. Obscure command-line flags and a crappy terminal based help system. These are problems I often run into when using os level apps. Like the /k flag I mentioned, for holding a cmd window open, who's idea was that? Unix apps don't tend to be much friendlier in this regard. Hopefully you can use google or StackOverflow to find the answer you need. But if not, you've got a lot of boring reading and frusterating trial and error to do. External factors. This one's kind of fuzzy. But when you leave the relatively sheltered harbor of your own scripts to deal with external processes you find yourself having to deal with the "outside world" to a much greater extent. And that's a scary place. All sorts of things can go wrong. Just to give a random example: the cwd in which a process is run can modify it's behavior. There are probably other issues, but those are the ones I've written down so far. Any other snags you'd like to add? Any suggestions for dealing with these problems?

  Read the article

• resizing row's height in QTreeWidget/QTreeView

  - by serge

  Hi everyone, I have some problems with sizing row's height in QTreeWidget. I use QStyledItemDelegate with QPlainTextEdit. During editing text in QPlainTextEdit i check for changes with a help of: rect = self.blockBoundingRect(self.firstVisibleBlock()) and if text's height changes i resize editor size and need row in QTreeWidget also resizing. But i don't know how to inform TreeWidget or a Delegate about changes. I tried to initialize editor with index, that i could use in a future, but Delegate creates new editor every time and i failed to use signals. Also I used following function to catch resize event, but it' doesn't: bool QAbstractItemDelegate::editorEvent ( QEvent * event, QAbstractItemModel * model, const QStyleOptionViewItem & option, const QModelIndex & index ) How can i bound editor's size changes with TreeWidget? And one more thing, by default all items (cells) in TreeWidget have -1 or some big value as default width. I need whole text in cell to be visible, so how can i limit cells width only by visible range and make it expand in height? I want for it the same behavior as in instance a table in MSWord. Thank you in advance, Serge

  Read the article

• how to tackle this combinatorial algorithm problem

  - by Andrew Bullock

  I have N people who must each take T exams. Each exam takes "some" time, e.g. 30 min (no such thing as finishing early). Exams must be performed in front of an examiner. I need to schedule each person to take each exam in front of an examiner within an overall time period, using the minimum number of examiners for the minimum amount of time (i.e. no examiners idle) There are the following restrictions: No person can be in 2 places at once each person must take each exam once noone should be examined by the same examiner twice I realise that an optimal solution is probably NP-Complete, and that I'm probably best off using a genetic algorithm to obtain a best estimate (similar to this? http://stackoverflow.com/questions/184195/seating-plan-software-recommendations-does-such-a-beast-even-exist). I'm comfortable with how genetic algorithms work, what i'm struggling with is how to model the problem programatically such that i CAN manipulate the parameters genetically.. If each exam took the same amount of time, then i'd divide the time period up into these lengths, and simply create a matrix of time slots vs examiners and drop the candidates in. However because the times of each test are not necessarily the same, i'm a bit lost on how to approach this. currently im doing this: make a list of all "tests" which need to take place, between every candidate and exam start with as many examiners as there are tests repeatedly loop over all examiners, for each one: find an unscheduled test which is eligible for the examiner (based on the restrictions) continue until all tests that can be scheduled, are if there are any unscheduled tests, increment the number of examiners and start again. i'm looking for better suggestions on how to approach this, as it feels rather crude currently.

  Read the article

• Using QTDesigner with PyQT and Python 2.6

  - by PyNewbie27

  Hi. I'm fairly new to Python and trying to work with the latest versions of QTDesigner, PyQT 4.7 and QT4.7 (I downloaded the whole package from PyQT4.7 website). I can't figure out how to make QTDesigner integrate closely with Python: ie. If I select "Form" View Code in QTDesigners menu, it errors saying "Unable to launch C:/Python26/Lib/site-packages/PyQT4/bin\uic." If I look in that directory there is a pyuic.py but not "uic". From searching online it seems this doesn't exist because it's expecting a C++ install instead of the python version. Is there anyway to make QTDesigner use/call pyuic.py to generate the code, then open an IDE or text editor of my choice to show me the PYTHON code generated by the QTDesigner-PyUIC chain? I'd like Designer to integrate closely with python, so I can make custom slots/signals in Designer while designing, then tweak the python code directly in my IDE later. If it is not possible to code directly inside QTDesigner using python, does that mean I have to hand code my programs entire UI directly in my PythonIDE? Using Designer directly would seemingly be nearly very very nice for a newbie such as myself, since I can see what properties each widget has and visually edit them while still learning the QT syntax without constantly having to use web resources to see what properties each widget should have and helps with boilerplate code generation, and what their defaults are, etc. I've googled and nobody seems to be using QTDesigner and Python in this manner together. It seems most are either handcoding all the QT code in their Python IDE of choice, or have found an obvious/easy method of doing what I want, therefore not really producing up to date tutorials on making this work together. Please enlighten me if you can. Thanks in advance for your time. Please include any suggestions you might have to a newbie trying to use Python with QT and QTDesigner. Thank you.

  Read the article

• django: error while migrating from 1.1 to 1.2

  - by gruszczy

  I am trying to migrate our django project from 1.1 to 1.2, but I get following error: Traceback (most recent call last): File "./manage.py", line 11, in <module> execute_manager(settings) File "/usr/local/lib/python2.6/dist-packages/django/core/management/__init__.py", line 438, in execute_manager utility.execute() File "/usr/local/lib/python2.6/dist-packages/django/core/management/__init__.py", line 379, in execute self.fetch_command(subcommand).run_from_argv(self.argv) File "/usr/local/lib/python2.6/dist-packages/django/core/management/base.py", line 191, in run_from_argv self.execute(*args, **options.__dict__) File "/usr/local/lib/python2.6/dist-packages/django/core/management/base.py", line 209, in execute translation.activate('en-us') File "/usr/local/lib/python2.6/dist-packages/django/utils/translation/__init__.py", line 66, in activate return real_activate(language) File "/usr/local/lib/python2.6/dist-packages/django/utils/functional.py", line 55, in _curried return _curried_func(*(args+moreargs), **dict(kwargs, **morekwargs)) File "/usr/local/lib/python2.6/dist-packages/django/utils/translation/__init__.py", line 36, in delayed_loader return getattr(trans, real_name)(*args, **kwargs) File "/usr/local/lib/python2.6/dist-packages/django/utils/translation/trans_real.py", line 193, in activate _active[currentThread()] = translation(language) File "/usr/local/lib/python2.6/dist-packages/django/utils/translation/trans_real.py", line 176, in translation default_translation = _fetch(settings.LANGUAGE_CODE) File "/usr/local/lib/python2.6/dist-packages/django/utils/translation/trans_real.py", line 159, in _fetch app = import_module(appname) File "/usr/local/lib/python2.6/dist-packages/django/utils/importlib.py", line 35, in import_module __import__(name) File "/home/gruszczy/Programy/bozorth/../bozorth/notifications/__init__.py", line 2, in <module> from django.db.models.signals import post_save File "/usr/local/lib/python2.6/dist-packages/django/db/__init__.py", line 75, in <module> connection = connections[DEFAULT_DB_ALIAS] File "/usr/local/lib/python2.6/dist-packages/django/db/utils.py", line 92, in __getitem__ conn = backend.DatabaseWrapper(db, alias) File "/usr/local/lib/python2.6/dist-packages/django/db/backends/sqlite3/base.py", line 154, in __init__ super(DatabaseWrapper, self).__init__(*args, **kwargs) TypeError: __init__() takes exactly 2 arguments (3 given) Anyone encountered this problem and know, how to solve?

  Read the article

• Home automation using Arduino / XMPP client for Arduino

  - by Ashish

  I am trying to setup a system for automating certain tasks in my home. I am thinking of a solution wherein a server side application would be able to send/receive commands/data to Arduino (attached with Arduino Ethernet Shield) via the web. Here the Arduino may both act as a sensor interface to the server application or command executor interface for the server app. E.g. (user story): The overhead water tank in my house has a water level sensor attached with Arduino (attached with Arduino Ethernet Shield). Another Arduino (attached with Arduino Ethernet Shield) is attached with a relay/latch. This relay/latch is then connected to a water pump. Now the server side application on the web is able to get/receive water level information from the Arduino on the water tank. Depending on the water level information received, the web application should send suitable signals/commands to Arduino on water pump to switch 'ON' or switch 'OFF' the water pump. Now for such a system to work across the web, I am thinking of using one of the type of solutions in order of my priority: Using XMPP for communication between server application and Arduino. Using HTTP polling. Using HTTP hanging GET. For solution number 1, I need to implement a XMPP client that would reside on Arduino. Is it possible to write a XMPP client small enough to reside on an Arduino? If yes what are the minimum possible XMPP client functionality that I need to write for Arduino, so that it would be able to contact XMPP servers solutions like GTalk, etc.? For solution number 2 and 3 I need guidance in implementation. Also which solution would be cost effective and easily extendable?

  Read the article

• Need help with artificial neural network

  - by deckard cain

  I have an input data for neural network that consists of 2 vectors with 200 elements, that i got from some program for generating signals. So it is actually 2x200 input to my nnet. As target data, i have one 1x200 vector that i also got from the same program. That is my training data set. I gather as much of those sets as i want so i transfer them to matlab and save them as, for example, set1, set2,.... When i am creating neural net, using newfit function (backropagation algorithm and everyhting else is set by default because i am kind of unexperianced with neural nets so i will have to experiment) i'm creating it using set1 only for example. Then, when i am to train neural net i train it for set1 then load set2 and train for it and so on. so its like this function net = create_fit_net(inputs,targets) numHiddenNeurons = 20; net = newfit(inputs,targets,numHiddenNeurons); net=train(net,inputs,targets); load set2; net=train(net,inputs,targets); load set3; net=train(net,inputs,targets); load set4; net=train(net,inputs,targets); i am using 4 sets of data here and all sets have variables of same name and size. My quesion is, am i doing this the right way, because, when doing simulation in some other m file, i am getting bad results, and every time i get different results. Does it matter if i create network with one set and then train with others too, and does it matter what set do i use to train network 1st? Also, i am confused about the amount of neurons to use (im using in the example 20 but actually i tried 1, 10, 30, 50, 100 200 and even 300 and i get nothing). If you have any suggestions, i'd be glad to take them into consideration. Any help is welcome. thanks in advance

  Read the article

• Developing a GPS car tracking system in C#

  - by Click Ok

  I'm in the brainstorming phase to develop a GPS car tracking system requested by a customer. I myself know the directions to build some GPS system to mobile phones and etc. But sincerely I don't know how to start in that project. That is the scenario: 1) The cars will get a device with a SIM CARD that will emit GPS signals. 2) My customer will in any place (home, work, etc) with a web connection will see in the map where the car is located. For me, I have not problems at get the GPS data, convert to usable info and show the position in some map system (like Google Maps or MS Bing Maps, by example). My problem is, how I do to retrieve that "GPS Signal" from device in the car? I will need some kind of "Receiver Device" connected to a web server machine in order to my application to consume that data? Or "automagically" my sodtware will receive the info from a third-party web-service? Or what? I thank for any help!

  Read the article

• Python coding test problem for interviews

  - by Kal

  I'm trying to come up with a good coding problem to ask interview candidates to solve with Python. They'll have an hour to work on the problem, with an IDE and access to documentation (we don't care what people have memorized). I'm not looking for a tough algorithmic problem - there are other sections of the interview where we do that kind of thing. The point of this section is to sit and watch them actually write code. So it should be something that makes them use just the data structures which are the everyday tools of the application developer - lists, hashtables (dictionaries in Python), etc, to solve a quasi-realistic task. They shouldn't be blocked completely if they can't think of something really clever. We have a problem which we use for Java coding tests, which involves reading a file and doing a little processing on the contents. It works well with candidates who are familiar with Java (or even C++). But we're running into a number of candidates who just don't know Java or C++ or C# or anything like that, but do know Python or Ruby. Which shouldn't exclude them, but leaves us with a dilemma: On the one hand, we don't learn much from watching someone struggle with the basics of a totally unfamiliar language. On the other hand, the problem we use for Java turns out to be pretty trivial in Python (or Ruby, etc) - anyone halfway competent can do it in 15 minutes. So, I'm trying to come up with something better. Surprisingly, Google doesn't show me anyone doing something like this, unless I'm just too dumb to enter the obvious search term. The best idea I've come up with involves scheduling workers to time slots, but it's maybe a little too open-ended. Have you run into a good example? Or a bad one? Or do you just have an idea?

  Read the article

• Qt Object Linker Problem " undefined reverence to vtable"

  - by Thomas

  This is my header: #ifndef BARELYSOCKET_H #define BARELYSOCKET_H #include <QObject> //! The First Draw of the BarelySocket! class BarelySocket: public QObject { Q_OBJECT public: BarelySocket(); public slots: void sendMessage(Message aMessage); signals: void reciveMessage(Message aMessage); private: // QVector<Message> reciveMessages; }; #endif // BARELYSOCKET_H This is my class: #include <QTGui> #include <QObject> #include "type.h" #include "client.h" #include "server.h" #include "barelysocket.h" BarelySocket::BarelySocket() { //this->reciveMessages.clear(); qDebug("BarelySocket::BarelySocket()"); } void BarelySocket::sendMessage(Message aMessage) { } void BarelySocket::reciveMessage(Message aMessage) { } I get the Linker Problem : undefined reference to 'vtable for barelySocket' This should mean, i have a virtual Function not implemented. But as you can see, there is non. I comment the vector cause that should solve the Problem, but i does not. The Message is a complex struct, but even converting it to int did not solve it. I searched Mr G but he could not help me. Thank you for your support, Thomas

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >