Search Results

Search found 34186 results on 1368 pages for 'single machine'.

Page 27/1368 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

  • Forwarding RDP via a Linux machine using iptables: Not working

    - by Nimmy Lebby
    I have a Linux machine and a Windows machine behind a router that implements NAT (the diagram might be overkill, but was fun to make): I am forwarding RDP port (3389) on the router to the Linux machine because I want to audit RDP connections. For the Linux machine to forward RDP traffic, I wrote these iptables rules: iptables -t nat -A PREROUTING -p tcp --dport 3389 -j DNAT --to-destination win-box iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT The port is listening on the Windows machine: C:\Users\nimmy>netstat -a Active Connections Proto Local Address Foreign Address State (..snip..) TCP 0.0.0.0:3389 WIN-BOX:0 LISTENING (..snip..) And the port is forwarding on the Linux machine: # tcpdump port 3389 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 01:33:11.451663 IP shieldsup.grc.com.56387 > linux-box.myapt.lan.ms-wbt-server: Flags [S], seq 94663035, win 8192, options [mss 1460], length 0 01:33:11.451846 IP shieldsup.grc.com.56387 > win-box.myapt.lan.ms-wbt-server: Flags [S], seq 94663035, win 8192, options [mss 1460], length 0 However, I am not getting any successful RDP connections from the outside. The port is not even responding: C:\Users\outside-nimmy>telnet example.com 3389 Connecting To example.com...Could not open connection to the host, on port 3389: Connect failed Any ideas? Update Per @Zhiqiang Ma, I looked at nf_conntrack proc file during a connection attempt and this is what I see (192.168.3.1 = linux-box, 192.168.3.5 = win-box): # cat /proc/net/nf_conntrack | grep 3389 ipv4 2 tcp 6 118 SYN_SENT src=4.79.142.206 dst=192.168.3.1 sport=43142 dport=3389 packets=6 bytes=264 [UNREPLIED] src=192.168.3.5 dst=4.79.142.206 sport=3389 dport=43142 packets=0 bytes=0 mark=0 secmark=0 zone=0 use=2 2nd update Got tcpdump on the router and it seems that win-box is sending an RST packet: 21:20:24.767792 IP shieldsup.grc.com.45349 > linux-box.myapt.lan.3389: S 19088743:19088743(0) win 8192 <mss 1460> 21:20:24.768038 IP shieldsup.grc.com.45349 > win-box.myapt.lan.3389: S 19088743:19088743(0) win 8192 <mss 1460> 21:20:24.770674 IP win-box.myapt.lan.3389 > shieldsup.grc.com.45349: R 721745706:721745706(0) ack 755785049 win 0 Why would Windows be doing this?

    Read the article

  • Turing Machine & Modern Computer

    - by smwikipedia
    I heard a lot that modern computers are based on Turing machine. I'd like to share my understanding and hear your comments. I think the computer is a big general-purpose Turing machine. Each program we write is a small specific-purpose Turing machine. The classical Turing machine do its job based on the input and its current state inside and so do our programs. Let's take a running program (a process) as an example. We know that in the process's address space, there's areas for stack, heap, and code. A classical Turing machine doesn't have the ability to remember many things, so we borrow the concept of stack from the push-down automaton. The heap and stack areas contains the state of our specific-purpose Turing machine (our program). The code area represents the logic of this small Turing machine. And various I/O devices supply input to this Turing machine. The above is my naive understanding about the working paradigm of modern computer. I couln't wait to hear your comments. Thanks very much.

    Read the article

  • continuous hard disk access - slowing down my machine

    - by suresh
    I find from the hard disk access LED on the front of my machine that the hard disk is being accessed more often and probably because of that, my machine is quite slow. The machine becomes unresponsive even when the load as seen from w command is around 1 or so. My desktop is optiplex 360 dell machine running Ubuntu 10.04. My questions are: How to quantify hard disk access and how to see if it is more than "normal" ? If it is more than normal, what are my solutions ? thanks suresh

    Read the article

  • Unexplained cache RAM drops on Linux machine

    - by FunkyChicken
    I run a CentOS 5.7 64 machine with 24gb ram and running kernel 2.6.18-274.12.1.el5. This machine runs only Nginx, php-fpm and Xcache as extra applications. Since about 3 weeks my memory behavior on this machine has changed and I cannot explain why. There are no crons running which flush anything like this. There are also no large numbers of files being deleted/changed during these drops. The 'cached' memory gets dropped about every few hours, but it's never a set gap between flushes, this indicates to me that some bottleneck gets reached instead. It also always seems to be when total memory usages gets to about 18GB, but again, not always exactly 18GB. This is a graph of my memory usage: As you can see in the graph the 'buffers' always stay more or less the same, it is mainly the 'cache' that gets dropped. Running vmstat -m I have outputted the memory usage just before and just after a memory drop. The output is here: http://pastebin.com/diff.php?i=hJqZqztm 'old version' being before, 'new version' being after a drop. About 3 weeks ago my server crashed during a heavy DDOS attack, after I rebooted the machine this odd behavior started. I have checked a bunch of logs, restarted the machine again, and cannot find any indication what changed. During these 'cache' memory drops, my iNode usage drops at the same time. Does anyone have any idea what might be causing this behavior? Clearly my RAM isn't full, so I am curious why this could be happening.

    Read the article

  • Sourcing local .bashrc .vimrc without copy to remote machine

    - by David Strejc
    Does anyone have an idea or hack on how to source my local dotfiles (I will probably need more of them so this solution should work with many files) on remote machines without scp them to remote machine? Is something like scp .bashrc to /tmp folder on remote machine and then exporting BASHRC env variable the best solution? I need this because of our company policy and fast cloud servers deployment and redeployment and I don't want to touch .bashrc files on remote machine so my colleges are able to use their default env which doesn't suit me.

    Read the article

  • MySQL - allow connection from remote machine as root user

    - by Senthil Kumar
    Hi all, When I installed MySQL server in Windows, there was an option "Allow root connection from remote machine". I checked that option and I had no probs when using it. I installed MySQL server in Ubuntu 9.04 using apt-get install. I can connect to the sql server from the same machine but when I try to connect from a virtual machine, it doesn't work. My guess is that I should allow root connection from remote machine. How to do that?

    Read the article

  • Installing CentOS on remote machine.

    - by vijay.shad
    Hi, Can I do a fresh install of centos linux distribution on a remote machine? I have got a machine with windows NT system in a remote location. Now i want to use that system as my deployment machine. To proceed on my plan i need to install a linux os(have chosen CentOS). The guy with machine there is not very much aware of the installation process of any OS. So i thought of the remotely install. Please give me some insight how can i achieve this?

    Read the article

  • Textmate single quotes autoclosure

    - by Arnold Sakhnov
    I’m using TextMate 1.5.10 on OS X Lion, and for some weird reason I don‘t get autocomplete for single quotes ('). Double quotes (") work fine. Since I personally prefer to use single quotes whenever I code in JavaScript or PHP, that thing annoys me a little. And as far I have googled, TextMate is actually supposed to autoclose single quotes by default. So why doesn’t this work for me and how do I force-enable this feature?

    Read the article

  • How to connect to memcached from another machine

    - by Oscar Del Ben
    I'm trying to use memcached from a different machine (which has access to my server), but I can't figure out how. on the memcached machine I can test the connection by running telnet 127.0.0.1 port And it works, but on the other machine it just keeps trying to connect telnet machine_address port Trying machine_address... I'm not sure if I should set up something else to get it working. I know the port is working and accessible because if I try to run other services on it, they works. Os is ubuntu

    Read the article

  • Severe latency only on one machine and only when accessing intranet site

    - by Joe M.
    I have one desktop machine that is having consistently high latency only when trying to load a page from an intranet site. Using the Chrome Developer Tools, the site shows a "Waiting" time of 4-5 seconds each page load. Other machines have <50ms, and the problem machine loads regular internet sites with <1s latency, so the problem is only on one machine and only when accessing the intranet site. This is a small business and all the hosts are on 192.168.0.1/24 I would have suspected a connection issue with the problem machine but normal internet sites are not having latency. Then I would have looked at connection issues with the intranet web server but other machines are not having latency to it. What else can I look at to troubleshoot this?

    Read the article

  • run browser from remote machine

    - by cathy02
    Hello, I can connect to a remote machine using ssh, I would like to open a URL from the remote machine. Well, I can do this using lynx (a command line browser), but then, javascript etc... gets messed up. Is there a way I can open the URL and see it in my local machine firefox browser for example ?? Thanks

    Read the article

  • Active Directory Profile Slows down machine

    - by boburob
    I have a strange issue with an Active Directory profile. When the user logs onto a machine with his profile, the whole machine becomes incredibly slow and unresponsive, with programs hanging and taking an age to load everything. If I log into the same machine with any other profile nothing happens. I took a look at his original profile, any start up programs, login scripts, etc and could not see what could be causing this. The machine is not running out of memory or CPU. Nothing strange is appearing in the event log and I can see nothing running under his profile which may cause this. So I created the user a new profile to test this on and exactly the same thing happens on the first login. The only thing which would of been carried across is the security groups the user is assigned to, yet I have other users with the same groups who do not experience these issues so I am now at a complete loss on where to go next!

    Read the article

  • create vmware virtual machine via command line on linux system

    - by tom smith
    evaluating/investigating vmware, and how you create a "virtual machine" using the command line for rhel/centos. basically, i want to be able to create a test virtual machine and then be able to run the VM on another system using the virtual player. so, i'm looking for pointers/articles/instructions that detail what i need (in terms of tools/apps) and the steps needed to accomplish this. i've seen a few articles/sites that discuss creating virtual machines, but they all involve using the GUI. thanks update:: while vmware is the company. there are different tools/apps provided to create a Virtual Machine. Basically, I want to do a test, to ultimately have a Virtual Machine/Image that can be run on a separate server using the vmplayer app I've seen docs that discuss using the GUI to create the VM, but haven't found any (yet) that discuss how to accomplish this using the command line approach. thanks...

    Read the article

  • How to set local alias for a machine?

    - by Alex G.
    I would like to set an alias on my local PC for a network machine. I know that it can be done by adding an entry in the hosts file as long as the IP address of the machine is also specified. However, the problem is that IPs are dynamically assigned by a DHCP server so I don't know for sure the IP address. Is there a way to define just an alias based on the machine's network name? P.S.: I'm running Windows Server 2008 R2.

    Read the article

  • Inbound connections to a ubuntu machine running a VPN

    - by shanedowling
    Is it possible to open inbound connections to a machine connected to a VPN server? The machine is running ubuntu 9.10 with two network devices(a wireless card and ethernet port), I can connect to my machine locally using a local ip but when I try port forward using my router I can't connect from my external ip. Is there a way around this? I figure with 2 network devices I can vpn over one and use the other for inbound connections but I can't figure out how to do this. Thanks

    Read the article

  • Hyper-V VM guest can't ping any machine

    - by Haadka
    So I got Host: Hyper-v enabled machine with four NICs, only one enabled. Network type: External IP configuration are correct for both host and guest (getting it from the DHCP of the company network) The same configuration works on a machine with single NIC But With this other machine, with 4 NICs, there is no Internet in the guest, actually it can't ping any IP expect the host (pings host IP only, not the name) I searched the Internet and did every solution, more than once, with no success.

    Read the article

  • Migrating users and IIS settings from a workgroup win2k3 machine to a new win2k8r2

    - by amber
    I am retiring my old Windows Server 2003 Standard 32bit machine to a new machine with Windows Server 2008 R2 Standard. The two sticking points are migrating user accounts (and there are a lot of them) and IIS settings/websites (again, there are a lot). The new machine has not been provisioned yet. I'm at that point where I'm about install the OS on it. The old machibe is configured with a mirrored set for its OS and data partitions. I have broken the mirror set, replicated all of the data to an external drive, and then rebuilt the mirror set. In short, I have an image of the old machine to play with while safely leaving it up and running. Thanks!

    Read the article

  • File command output is different for same file on diff machine

    - by Coka
    I get different output of file command on same file(checked inode) from different machines. One of the machines is with suse10 sp3 and the another - rhel4. machine1>file x.tcl x.tcl: ASCII English text machin2>file x.tcl x.tcl: data Even in vi editor same file look different from different machine. Any clue? One more thing - there's third machine suse10 sp3 works fine. Is this machine issue?

    Read the article

  • very Slow machine when searching the network

    - by Adam
    Hi We are using a Dell desktop machine with 2 GB RRAM & Pentium D 3.00 GHz. The machine is very slow when using our Sales program and searching over the local network. We have this problem on 2 machine which are the same spec - This one and another. All of our other machine (10) run fast with no issues. Our server is SBS 2008 and AV is AVG. All of our client machines are WinXp Pro SP3 using the latest drivers. Any ideas?

    Read the article

  • Performing task on remote window server 2003 machine

    - by Vaibhav Jain
    I have to perform various task such as restarting process, monitor process state check disk space, log monitoring on Window server 2003 machine. For this i am using remote desktop access which is very slow. Is there any alternate (Tool or Framework) for windows server where i can execute my script on my machine and the required task will be performed on the remote machine in somewhat interactive manner (like putty in linux)

    Read the article

  • How do I fix my VM's network connection if it seems to be running ok from the host?

    - by AndreiC
    I have a virtual machine (made with vmware) with a linux ubuntu os installed on it (i have a series of them), with NAT network connection - i am running vmware on Windows XP (my host system); the virtual machine can't connect to the internet. All the vmware services seem to be working fine from windows point of view, but inside the machine i can't connect to the internet. What is strange is that the virtual machine was able to use the internet some time ago, but all of a sudden, i just can't use my internet on the virtual machine - i have made no changes to the settings, nor in windows, nor in the virtual machine - so i don't understand.

    Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >