Search Results

Search found 12283 results on 492 pages for 'tcp port'.

Page 27/492 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• How can I set up port forwarding for SQL Server 2005?

  - by Manish

  Hello Subject :how to use port forwarding Internet------> Router in my network ------->LocalMachine (Windows 2003) -->Sqlserver2005 How can I access SQL Server through the internet via a router in the local network? My router IP Address is =192.168.1.86; My local machine which is connected to the router Ip Address is= 192.168.1.81 At port No=1433 tell me how to use port forwarding Thanks for help in advance

  Read the article

• Port forwarding using a BT Home Hub 2.0 (Supplied to new BT Infinity Customers in the UK)

  - by Jasarien

  I don't usually have trouble with port forwarding, I've been able to do it successfully on a number of different routers, including Linksys, Belkin, Netgear and Apple (Time Capsule / Airport Extreme). So I'm quite confused here. I had been using my Apple Time Capsule as my router for a few years now, with several port mappings all working fine. But it died recently, so I've had to resort to using the BT Home Hub 2.0 that was supplied with my BT Infinity broadband subscription. The forwarding interface for the Home Hub is simplified for the most part, allowing you to select an application or game and assign it to a particular computer on the network which you choose from a list that the Home Hub has 'discovered'. My Mac Pro has a manually assigned static IP 192.168.1.4 and my router is static at 192.168.1. I have chosen SSH from the list of applications and assigned it to my Mac Pro (the only computer in the list currently). The Home Hub also has a feature to keep a DNS service updated, and I have set it to keep my external IP address updated on my hostname. This is how I had it setup in the past with other routers and not had trouble before. I am able to ping my hostname (and external IP) from outside the network and get a response. But when I try to connect using SSH, the connection times out. The Home Hub also has "Firewall settings". The currently selected setting is: Default: Allow all outgoing connections and block all incoming traffic. Games and application sharing is allowed. But I've tried changing it to: Disabled: All traffic is allowed to pass through your BT Home Hub to your devices. Note: you’ll still need to use the games and application sharing feature to make sure that certain applications work properly. And the connection still times out... So frustrating. The OS X firewall on my Mac is disabled, so I don't think that's in the way. I have tried setting the port forwarding manually, instead of relying on the preset "SSH" option (incase it's not using the port I expect). So I set up my own "application" (as the Home Hub calls it) and forwarded external port 22 TCP to internal port 22 TCP to 192.168.1.4 - but that just gives the same result - unable to connect. Next, with the router's firewall disabled and OS X's firewall disabled, I ran the Shields Up test (https://www.grc.com/x/ne.dll?bh0bkyd2) and the result was that all my service ports (0 - 1055) are in 'Stealth' mode. I.e. nothing even exists at my IP as far as any outsider is concerned... Strange. The only thing that seems to work is setting my Mac Pro as the DMZ - which I don't want to do for obvious reasons. Any help with this would be extremely appreciated, thanks.

  Read the article

• Receving multiple multicast feeds on the same port - C, Linux

  - by Gigi

  I have an application that is receiving data from multiple multicast sources on the same port. I am able to receive the data. However, I am trying to account for statistics of each group (i.e. msgs received, bytes received) and all the data is getting mixed up. Does anyone know how to solved this problem? If I try to look at the sender's address, it is not the multicast address, but rather the IP of the sending machine. I am using the following socket options: struct ip_mreq mreq; mreq.imr_multiaddr.s_addr = inet_addr("224.1.2.3"); mreq.imr_interface.s_addr = INADDR_ANY; setsockopt(s, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq)); and also: setsockopt(s, SOL_SOCKET, SO_REUSEPORT, &reuse, sizeof(reuse)); I appreciate any help!!!

  Read the article

• controling individual pins on a serial port

  - by Faken

  I know that serial ports work by sending a single stream of bits in serial. I can write programs to send and receive data from that one pin. However, there are a lot more other pins on the serial port connection that normal aren't used but from documentation all seem to have some sort of function for signalling as opposed to data transfer. Is it possible in any way to cause the other pins that are not used for direct data transfer to be controlled individual? If so, how would i go about doing that?

  Read the article

• Is the port number the same when connecting to git via the git+ssh protocol?

  - by Tomek

  Hi all. I was wondering when connecting to a git repository, does the git+ssh protocol use the same port number as just using the git protocol. For example: git://example.com/git/helloworld git+ssh://[email protected]/git/helloworld I am trying to push to a remote repository that has port forwarding setup on only the git protocol port number (9418) using EGit. When I try and use the git+ssh, EGit tells me git+ssh://.... connection is closed by foreign host Thanks, Tomek

  Read the article

• What can impact the throughput rate at tcp or Os level?

  - by Jimm

  I am facing a problem, where running the same application on different servers, yields unexpected performance results. For example, running the application on a particular faster server (faster cpu, more memory), with no load, yields slower performance than running on a less powerful server on the same network. I am suspecting that either OS or TCP is causing the slowness on the faster server. I cannot use IPerf , unless i modify it, because the "performance" in my application is defined as Component A sends a message to Component B. Component B sends an ACK to component A and ONLY then Component A would send the next message. So it is different from what IPerf does, which to my knowledge, simply tries to push as many messages as possible. Is there a tool that can look at OS and TCP configuration and suggest the cause of slowness?

  Read the article

• How to setting up iptables for traffic fowarding on port 80 from specific sources.

  - by Darkmage

  Im running a web server on port80, but i want traffic coming from ip 212.333.111.222 on port 80 to be fowarded to port 9020 on the same server that my web server is rinning at that is my sshd port

  Read the article

• Actionscript NetStream.play drops port in relative URLs

  - by Steve Middleton

  Hi, the current page my flash application is running from is http://localhost:3000/. I'm trying to play a video using NetStream.play(relativeURL) by using a relative URL (e.g. "myVideo.flv"), but when I look at the actual request made by actionscript, it's dropping the port number. (e.g. http://localhost/myVideo.flv). Is there something I can do on the flash side to make this work? Is anyone else having this problem?

  Read the article

• How do you open a port on a cisco firewall?

  - by johnny

  Hi, I'm sure this is simple but how do you open a port on a cisco firewall? I want to use fixup to alias a port and then actually open the port. But I don't know how to do it. Thank you.

  Read the article

• How do I make Skype not use port 80?

  - by ApacheNoSkype

  I need this port for apache, how do I forbidden Skype from trying to use this port any more?

  Read the article

• How to allow non-root user to listen on privileged port?

  - by Dan Goldburt

  I want syslog to run as a non-root user on my linux box. That makes it impossible for it to bind to port 514 - because that's a privileged port. Is there any way I can grant non-admin user "foo" the ability to listen on port 514?

  Read the article

• Run jsp in eclipse on specific port and ssl

  - by zealot452

  Hello, I have used Eclipse 3.4 to create a Dynamic Web Project. I have also configured my server to use port 8443 with ssl. If I start my server I can access my test.jsp by going to it's address https://localhost:8443/TestContext/test.jsp In eclipse, I have installed this server and added my project to the server. If I Run test.jsp it always launches as http://localhost:8080/TestContext/test.jsp My question is: How can I set up eclipse to run this on https://localhost:8443/ rather than the default 8080? Thanks in advance.

  Read the article

• Port numbers in Visual Studio projects and IIS

  - by aspdotnetuser

  I have a few questions about localhost and port numbers as this is an area where I do not have a lot of knowledge, and because I recently had to work with setting up Visual Studio projects and IIS and there are things I'm not clear on. I have the following questions on the things I find confusing. I thought it made more sense to include them all in one question instead of making separate questions. I have noticed a random port number is generated with projects I have worked on in the past, but I recently saw a project where the port number was fixed. What is the purpose of having a fixed/default localhost port number? i.e is it particularly useful on projects that have many programmers working on the project? If a solution contains multiple projects (for example, WCF services, Domain, MVC/Web pages), is it possible to setup a different localhost port for each of them? If so, what is the benefit of this? If a solution contains multiple projects and has different localhost urls/port numbers, must there be a corresponding website (and application pool) for each project in IIS? Or just for the project that contains the actual web pages?

  Read the article

• Parallel Port Problem in 12.04

  - by Frank Oberle

  I have a “dumb” printer attached to a parallel port in my machine which works fine under the “other” resident operating system (from Redmond) on the same machine. I recently added Ubuntu 12.04 as a dual boot on the machine, but Ubuntu doesn't seem to recognize the parallel port at all. All I need to set up a printer is a really plain-vanilla fixed pitch text-only generic driver, which is present, but no parallel ports show up. (The other printers, all on USB ports, seem to work just fine). Following what appeared to me to be the most reasonable of the many conflicting pieces of advice on the web, here's what I did: I added the following lines to /etc/modules parport_pc ppdev parport Then, after rebooting, I checked to see that the lines were still present, and they were. I ran dmesg | grep par and got the following references in the output that seemed like they might have to do with the parallel port: [ 14.169511] parport_pc 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.169516] PCI parallel port detected: 9710:9805, I/O at 0xce00(0xcd00), IRQ 21 [ 14.169577] parport0: PC-style at 0xce00 (0xcd00), irq 21, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 14.354254] lp0: using parport0 (interrupt-driven). [ 14.571358] ppdev: user-space parallel port driver [ 16.588304] type=1400 audit(1347226670.386:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=964 comm="apparmor_parser" [ 16.588756] type=1400 audit(1347226670.386:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=964 comm="apparmor_parser" [ 16.673679] type=1400 audit(1347226670.470:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 16.675252] type=1400 audit(1347226670.470:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 16.675716] type=1400 audit(1347226670.470:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1014 comm="apparmor_parser" [ 16.676636] type=1400 audit(1347226670.474:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1015 comm="apparmor_parser" [ 16.677124] type=1400 audit(1347226670.474:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1015 comm="apparmor_parser" [ 1545.725328] parport0: ppdev0 forgot to release port I have no idea what any of that means, but the line “parport0: ppdev0 forgot to release port ” seems unusual. I was still unable to add a printer for my old clunker, so I tried the direct approach, typing echo “Hello” > /dev/lp0 and received a Permission denied message. I then tried echo “Hello” > /dev/parport0 which didn't give me any message at all, but still didn't print anything. Running the command sudo /usr/lib/cups/backend/parallel gives the following: direct parallel:/dev/lp0 "unknown" "LPT #1" "" "" Checking the permissions for /dev/parport0, Owner, Group, and Other are all set to read and write. crw-rw---- 1 root lp 6, 0 Sep 9 16:37 /dev/lp0 crw-rw-rw- 1 root lp 99, 0 Sep 9 16:37 /dev/parport0 The output of the command lpinfo -v includes the following line: direct parallel:/dev/lp0 I've read several web postings that seem to suggest this has been a problem for several years, but the bug reports were closed because there wasn't enough information to address the issue (shades of Microsoft!). Any suggestions as to what I might be missing here?

  Read the article

• BizTalk Orchestration & Port Tutorial Part 2

  - by bosuch

  In Part 1 I showed how to create and publish a simple Orchestration demo. Now we’ll finish configuring it in the admin console and test it. Open the BizTalk Server 2009 Administration Console, and expand BizTalk Server 2009 Administration, then Applications. You should have an entry for OrchestrationPortDemo – expand it as well. First, we’ll add the Receive Port – the place that we’ll drop the test file. Right-click on Receive Ports and select New One-way Receive Port. On the General tab, name it InputPort, then click over to Receive Locations.   Click New to add a new location. Your receive location can be FTP, SQL, WCF, SharePoint, or many other choices, but for this demo we’ll add a File location. Click the Configure button and set a receive folder (something like “C:\PortDemo\”) and a file mask (stick with “*.xml” for now) and click OK three times to create your Receive Port.   Next we’ll create the Send port – the location where BizTalk will drop the file. Right-click on Send Ports and choose New Static One-way Send Port. Give it an appropriate name, and configure the FILE Transport Properties as shown:   Click OK twice and your Send Port will be created. Now we’ll configure the Orchestration Bindings. Click on Orchestrations, then right-click the orchestration itself and select Properties. Select the Bindings tab. Choose BizTalkServerApplication as the host, and select the Send and Receive ports you previously created, as shown:   Now it’s time to fire everything up. Right-click on the send port you created and click Start. Once the Status column displays “Started”, click on Receive Locations and Enable the Receive Location previously created. Finally, start the Orchestration. Now, time to test! Create a simple xml file like: <root>    <Node1>Test</Node1>    <Node2>Test</Node2> </root> And drop it into the C:\PortDemo folder. After a couple of seconds the file should disappear – this indicates BizTalk has picked it up for processing. Look in the C:\PortDemo\Output folder and you should see an xml file with a GUID for a name, like {7C50104F-FC3E-4A49-B2FA-4F560A37636D}.xml. Open it to verify that it matches your input file. Practically, this demo doesn’t do a whole heck of a lot, but it shows you the basics for building, publishing and running an orchestration.

  Read the article

• Parallel port with C#

  - by Michael S.

  Hello, I am trying to send data to LPT1 port with a C# program, unfortunately with no success.. I am using windows 7 x64. I tried both x86 and x64 (inpoutx64.dll) dll's.. With the x64 dll when I send: Output(888, 255); It just continues the program as everything went ok, but i can't see anything on my multimeter (only the static 0.02V).. I also tried the following with C++: int main () { int val = 0; printf("Enter a value\n"); scanf("%d", &val); _outp(0x378, val); getchar(); _outp(0x378, 0); return 0; } But it throws an exception: Unhandled exception at 0x01281428 in ppac.exe: 0xC0000096: Privileged instruction. I remember once I made something like this work on xp, I hope it's possible on win7 too.. Please help me with this. Thanks.

  Read the article

• Serial port and checkboxes updating

  - by hradecek

  in my app' i'm recieving data from serial port and save them into two bool arrays. And depends on these array i'm setting checkboxes. But checkboxes are not updating only when i change the tabs.... Here's how i'm doin' it(maybe there's better way how to do it) private void comboBoxCommunication_SelectionChanged(object sender, SelectionChangedEventArgs e) { if (serialPort.IsOpen) { recieveThread.Abort(); serialPort.Close(); } ComboBoxItem cbi = (ComboBoxItem)comboBoxCommunication.SelectedItem; portCommunication = cbi.Content.ToString(); serialPort.PortName = portCommunication; try { serialPort.Open(); recieveThread = new Thread(dataRecieving); prijmiThread.Start(); checkBoxI1.IsChecked = vstupy[0] ? true : false; checkBoxI2.IsChecked = inputs[1] ? true : false; checkBoxI3.IsChecked = inputs[2] ? true : false; checkBoxQ2.IsChecked = outputs[3] ? true : false; } catch (IOException ex) { MessageBox.Show(ex.ToString(), "Error!", MessageBoxButton.OK, MessageBoxImage.Error, MessageBoxResult.OK); } } private void dataRecieving() { if (serialPort.IsOpen) { int i = serialPort.ReadChar(); if (i == 'A') { inputs[0] = true; } else if (i == 'a') { inputs[0] = false; } if (i == 'B') { inputs[1] = true; } else if (i == 'b') { inputs[1] = false; } if (i == 'C') { inputs[2] = true; } else if (i == 'c') { inputs[2] = false; } if (i == 'D') { outputs[0] = true; } else if (i == 'd') { outputs[0] = false; } } }

  Read the article

• openvpn port 53 bypasses allows restrictions ( find similar ports)

  - by user181216

  scenario of wifi : i'm using wifi in hostel which having cyberoam firewall and all the computer which uses that access point. that access point have following configuration default gateway : 192.168.100.1 primary dns server : 192.168.100.1 here, when i try to open a website the cyberoam firewall redirects the page to a login page (with correct login information, we can browse internet else not), and also website access and bandwidth limitations. once i've heard about pd-proxy which finds open port and tunnels through a port ( usually udp 53). using pd-proxy with UDP 53 port, i can browse internet without login, even bandwidth limit is bypassed !!! and another software called openvpn with connecting openvpn server through udp port 53 i can browse internet without even login into the cyberoam. both of softwares uses port 53, specially openvpn with port 53, now i've a VPS server in which i can install openvpn server and connect through the VPS server to browse internet. i know why that is happening because with pinging on some website(eb. google.com) it returns it's ip address that means it allows dns queries without login. but the problem is there is already DNS service is running on the VPS server on port 53. and i can only use 53 port to bypass the limitations as i think. and i can not run openvpn service on my VPS server on port 53. so how to scan the wifi for vulnerable ports like 53 so that i can figure out the magic port and start a openvpn service on VPS on the same port. ( i want to scan similar vulnerable ports like 53 on cyberoam in which the traffic can be tunneled, not want to scan services running on ports). improvement of the question with retags and edits are always welcomed... NOTE : all these are for Educational purpose only, i'm curious about network related knowledge.....

  Read the article

• Systemd Service Start With Dynamic Port Value From Docker

  - by Sheriffen

  Using CoreOS, Docker and systemd to manage my services I want to properly perform service discovery. Since CoreOS utilizes etcd (distributed key-value) there is a very convenient way to do this. On systemd's ExecStartPost I can just insert the started service into etcd without problems. My usecase needs something like this: ExecStartPost=/usr/bin/etcdctl set /services/myServiceName '{ \"host\": \"%H\", \"port\": 5555 }' which works like a charm. But this is where my idea popped up. Docker has the power to randomly assign a port if I just run docker run -p 5555 which is awesome since I don't have to set it statically in the *.service file and I could possibly run multiple instances on the same host. What if I could get the randomly assigned port and insert instead of the static 5555? Turns out I can use the docker port command to get the port and with some formatting we can get just the port with $(echo $(/usr/bin/docker port my-container-name 5555) | cut -d':' -f2) which works if I set it (using bash) like this: /usr/bin/etcdctl set /services/myServiceName '{ \"host\": \"%H\", \"port\": '$(echo $(/usr/bin/docker port my-container-name 5555) | cut -d':' -f2)' }' but using systemd I just can't get it to work. This is the code I'm using: ExecStartPost=/usr/bin/etcdctl set /services/myServiceName '{ \"host\": \"%H\", \"port\": '$(echo $(/usr/bin/docker port my-container-name 5555) | cut -d':' -f2)'}' Somehow I got something wrong but it's hard to debug since it works when typed in the terminal.

  Read the article

• How to configure traffic from a specific IP hardcoded to an IP to forward to another IP:PORT using i

  - by cclark

  Unfortunately we have a client who has hardcoded a device to point at a specific IP and port. We'd like to redirect traffic from their IP to our load balancer which will send the HTTP POSTs to a pool of servers able to handle that request. I would like existing traffic from all other IPs to be unaffected. I believe iptables is the best way to accomplish this and I think this command should work: /sbin/iptables -t nat -A PREROUTING -s $CUSTIP -j DNAT -p tcp --dport 8080 -d $CURR_SERVER_IP --to-destination $NEW_SERVER_IP:8080 Unfortunately it isn't working as expected. I'm not sure if I need to add another rule, potentially in the POSTROUTING chain? Below I've substituted the variables above with real IPs and tried to replicate the layout in my test environment in incremental steps. $CURR_SERVER_IP = 192.168.2.11 $NEW_SERVER_IP = 192.168.2.12 $CUST_IP = 192.168.0.50 Port forward on the same IP /sbin/iptables -t nat -A PREROUTING -p tcp -d 192.168.2.11 --dport 16000 -j DNAT --to-destination 192.168.2.11:8080 Works exactly as expected. IP and port forward to a different machine /sbin/iptables -t nat -A PREROUTING -p tcp -d 192.168.2.11 --dport 16000 -j DNAT --to-destination 192.168.2.12:8080 Connections seem to timeout. Restrict IP and port forward to only be applied to requests from a specific IP /sbin/iptables -t nat -A PREROUTING -p tcp -s 192.168.0.50 -d 192.168.2.11 --dport 16000 -j DNAT --to-destination 192.168.2.12:8080 Times out as well. Probably for the same reason as the previous entry. Does anyone have any insights or suggestions? thanks,

  Read the article

• Port forwarding problem

  - by Steve

  I have a modem connecting to ADSL2 network and a router connecting to the modem. The rest of the machines all connect to the router. The modem has IP as 192.168.1.1 and the router's IP is 192.168.0.1. From the modem configuration, I can see that the modem thinks the router's IP is 192.168.1.2. I can visit the router by either using 192.168.0.1 or 192.168.1.2. Now I forward a port from the router to a private machine. It works. I can test it by typing 192.168.1.2 and it is redirected to the private machine. But if I use 192.168.0.1, it is still the router's configuration page. I also do a port forwarding on my modem. Since the modem sees only the router, I can only forward the port to the router's specific port. And I am thinking that by doing this, I can reach the private machine after two times port forwarding, once on the modem and once on the router. I also have a static public IP. I want to achieve the goal that when someone types the public IP, he will be redirected to the private machine. But when I use some online port forwarding tester, the result always says that the port is closed on the public IP. I have the questions: Why my router has two IPs? Why using one IP I can see the port forwarding result while using the other I cannot? I think the port forwarding only works when visiting from outside, rather than from both outside and inside. Otherwise, if I set port forwarding on my router/modem on port 80, I will never be able to see its original configuration page again. Everything is forwarded. Am I right? How can I achieve my goal described above? By achieve this, I will have a dedicated server of my own and the users can visit from the public IP. Anyone can correct me on any mistakes I made? I am using Netconn modem and D-Link DIR-300 router. Thank you very much for any help. Edit: Consider I have correctly setup the whole thing. Now I want to test my website by using public IP to visit it, but the port forwarding doesn't work. Does it consider that I am inside the local network and not using the port forwarding? If so, how can I do it? I ask my friends (outside my local network) to have a try and they can see the website. What should I do so that from the inside, I can do the testing? Thank you very much.

  Read the article

• Problem with sending out variable to serial port using api JAVA

  - by sjaakensjon

  We are developing a java program for school. But we are experiencing problems with sending out a variable created by 3 sliders. The idea is that we have 3 sliders. One slider for every color. Red green and blue. The variable has to have a value between 0 and 255. Everytime the value of the slider changes is has to send a variable for the channel, that value is 1, 2 ,3. And after that it has to send the value of the slider through the serial port. Could you please help us out by creating an example program? Below is our code so far. Thanks in advance. Sjaak package main; import javax.swing.*; import javax.swing.event.*; import java.awt.*; import app.Com; import app.Parameters; public class menu{ JSlider sliderblauw; JLabel hoeveelblauw; JLabel blauw; JLabel rood; JSlider sliderrood; JLabel hoeveelrood; JLabel groen; JLabel hoeveelgroen; JSlider slidergroen; public menu(){ Frame venster = new JFrame("Color control"); JPanel blauwinstel = new JPanel(); ((JFrame) venster).setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); venster.setSize(500, 500); venster.setVisible(true); sliderblauw = new JSlider(JSlider.VERTICAL, 0, 255, 0); sliderblauw.addChangeListener(new veranderingblauw()); hoeveelblauw = new JLabel ("0"); blauwinstel.add(sliderblauw); blauwinstel.add(hoeveelblauw); venster.add(blauwinstel, BorderLayout.WEST); sliderblauw.setMajorTickSpacing(10); sliderblauw.setPaintTicks(true); JPanel roodinstel = new JPanel(); sliderrood = new JSlider(JSlider.VERTICAL, 0, 255, 0); sliderrood.addChangeListener(new veranderingrood()); hoeveelrood = new JLabel ("0"); roodinstel.add(sliderrood); roodinstel.add(hoeveelrood); venster.add(roodinstel, BorderLayout.EAST); sliderrood.setMajorTickSpacing(10); sliderrood.setPaintTicks(true); JPanel groeninstel = new JPanel(); slidergroen = new JSlider(JSlider.VERTICAL, 0, 255, 0); slidergroen.addChangeListener(new veranderinggroen()); hoeveelgroen = new JLabel ("0"); groeninstel.add(slidergroen); groeninstel.add(hoeveelgroen); venster.add(groeninstel, BorderLayout.CENTER); slidergroen.setMajorTickSpacing(10); slidergroen.setPaintTicks(true); } public class veranderingblauw implements ChangeListener{ public void stateChanged(ChangeEvent ce){ int value = sliderblauw.getValue(); String waarde_blauw = Integer.toString(value); hoeveelblauw.setText(waarde_blauw); }} public class veranderingrood implements ChangeListener{ public void stateChanged(ChangeEvent ce){ int value = sliderrood.getValue(); String waarde_rood = Integer.toString(value); hoeveelrood.setText(waarde_rood); }} public class veranderinggroen implements ChangeListener{ public void stateChanged(ChangeEvent ce){ int value = slidergroen.getValue(); String waarde_groen = Integer.toString(value); hoeveelgroen.setText(waarde_groen); }} public static void main( String[] args) { new menu(); } }

  Read the article

• C++ Serial Port Question

  - by Pfeffer

  Problem: I have a hand held device that scans those graphic color barcodes on all packaging. There is a track device that I can use that will slide the device automatically. This track device functions by taking ascii code through a serial port. I need to get this thing to work in FileMaker on a Mac. So no terminal programs, etc... What I've got so far: I bought a Keyspan USB/Serial adapter. Using a program called ZTerm I was successful in sending commands to the device. Example: "C,7^M^J" I was also able to do the same thing in Terminal using this command: screen /dev/tty.KeySerial1 57600 and then type in the same command above(but when I typed in I just hit Control-M and Control-J for the carriage return and line feed) Now I'm writing a plug-in for FileMaker(in C++ of course). I want to get what I did above happen in C++ so when I install that plug-in in FileMaker I can just call one of those functions and have the whole process take place right there. I'm able to connect to the device, but I can't talk to it. It is not responding to anything. I've tried connecting to the device(successfully) using these: FILE *comport; if ((comport = fopen("/dev/tty.KeySerial1", "w")) == NULL){...} and int fd; fd = open("/dev/tty.KeySerial1", O_RDWR | O_NOCTTY | O_NDELAY); This is what I've tried so far in way of talking to the device: fputs ("C,7^M^J",comport); or fprintf(comport,"C,7^M^J"); or char buffer[] = { 'C' , ',' , '7' , '^' , 'M' , '^' , 'J' }; fwrite (buffer , 1 , sizeof(buffer) , comport ); or fwrite('C,7^M^J', 1, 1, comport); Questions: When I connected to the device from Terminal and using ZTerm, I was able to set my baud rate of 57600. I think that may be why it isn't responding here. But I don't know how to do it here.... Does any one know how to do that? I tried this, but it didn't work: comport->BaudRate = 57600; There are a lot of class solutions out there but they all call these include files like termios.h and stdio.h. I don't have these and, for whatever reason, I can't find them to download. I've downloaded a few examples but there are like 20 files in them and they're all calling other files I can't find(like the ones listed above). Do I need to find these and if so where? I just don't know enough about C++ Is there a website where I can download libraries?? Another solution might be to put those terminal commands in C++. Is there a way to do that? So this has been driving me crazy. I'm not a C++ guy, I only know basic programming concepts. Is anyone out there a C++ expert? I ideally I'd like this to just work using functions I already have, like those fwrite, fputs stuff. Thanks!

  Read the article

• Google dévoile son nouveau protocole QUIC dans Chrome, qui combine le meilleur de TCP et UDP

  Google dévoile son nouveau protocole QUIC dans Chrome qui combine le meilleur de TCP et UDPAprès le protocole SPDY, permettant d'accélérer le Web en compressant les requêtes d'une page Web, Google expérimente un nouveau protocole qui offrira comme le précédent une vitesse de chargement des pages optimisée.Le géant de la recherche vient de dévoiler un premier aperçu du protocole expérimental Quick UDP Internet Connections (QUIC), dans la dernière version de son navigateur sur le canal Canary.QUIC a pour objectif de faire évoluer le protocole TCP en tirant parti des avantages qu'offre UDP. Le protocole repose sur un multiplexage de flux au dessus d'UDP, pour permettre des transmissions fiables en ...

  Read the article

• How to host WCF service and TCP server on same socket?

  - by Ole Jak

  Tooday I use ServiceHost for self hosting WCF cervices. I want to host near to my WCF services my own TCP programm for direct sockets operations (like lien to some sort of broadcasting TCP stream) I need control over namespaces (so I would be able to let my clients to send TCP streams directly into my service using some nice URLs like example.com:port/myserver/stream?id=1 or example.com:port/myserver/stream?id=anything and so that I will not be bothered with Idea of 1 client for 1 socket at one time moment, I realy want to keep my WCF services on the same port as my own server or what it is so to be able to call www.example.com:port/myWCF/stream?id=222...) Can any body please help me with this? I am using just WCF now. And I do not enjoy how it works. That is one of many resons why I want to start migration to clear TCP=) I can not use net-tcp binding or any sort of other cool WS-* binding (tooday I use the simpliest one so that my clients like Flash, AJAX, etc connect to me with ease). I needed Fast and easy in implemrnting connection protocol like one I created fore use with Sockets for real time hi ammount of data transfering. So.. Any Ideas? Please - I need help.

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >