Search Results

Search found 3875 results on 155 pages for 'the light spark'.

Page 27/155 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• How do you confirm network adapter is gigabit capable?

  - by StrandedPirate

  Upgrading my network to gigabit speeds and don't know how to determine if the NIC in one of the systems is capable of gigabit speed. The documentation from the manufacturer states this: Network adapter 10/100/1000 Ethernet LAN on system board However when I go to the properties of the NIC under Speed & Duplex my only options are: 10 Mb Full 10 Mb Half 100 Mb Full 100 Mb Half Auto Is there a command line I can run that will give me more detail about the NIC? Windows 7 x64 OS New Info: The new switch I just bought has a light to indicate 1000Mbps. I can tell from the light that this NIC is indeed negotiating at 1000Mbps but I'd still like to know how to determine this from the console in windows.

  Read the article

• Disable pendrive blinking in Linux

  - by Joey Adams

  I recently bought a 16GB Super Talent pen drive that seems to work well for running the Ubuntu Live "CD" in persistent mode (see this for how I installed it). One slightly annoying thing, however, is that this pen drive has a bright red light on it that stays on when it's idle. Is there a way to make the light stay off at least when the pen drive is not performing IO? I'm not even sure it's possible to do. If there is (in Linux), I'm guessing it boils down to some ioctl invoked by some utility. Otherwise, I imagine it would involve hacking the firmware or simply opening up the pen drive and removing the LED :D Then again, I guess it keeps the LED on to indicate that the drive should not be removed.

  Read the article

• iDeneb OS X Issues

  - by Charlie Somerville

  This afternoon I installed OS X Leopard on my computer through iDeneb. It mostly worked, but I have a few issues. Firstly, it doesn't seem like it's detecting my graphics card properly. I have a Nvidia 8800GT 512mb installed. As you can see in the screenshot below, it's not detecting it and limiting me to a resolution of 1024x768 (which is a pain in the arse to use) Secondly, I don't have any sound. It's not a massive issue like the graphics issue above, but I'd still like to get it rectified. Thirdly, (this is a very small one) my numlock light doesn't seem to be functioning. I don't really care as the numpad still works, but it would be nice to have the numlock light working. Can anyone lend a hand with any of those problems? Thanks. (bump for great justice)

  Read the article

• How to properly create a startup script for tracd on Synology DS209+II?

  - by Daren Thomas

  I'm running tracd on a Synology DS209+II NAS. For that purpose, I have created a script in /opt/etc/init.d called S81trac: myserver> ls -l /opt/etc/init.d -rwxr-xr-x 1 root root 127 May 19 09:56 S80apache -rwxr-xr-x 1 root root 122 Jun 10 10:17 S81trac This file has following contents: #!/bin/sh # run tracd /opt/bin/tracd -p 8888 -auth=*,/volume1/svn/svn-auth-file,mydomain -e /volume1/trac-env And this actually works, except, the NAS never really finishes booting: The blue light keeps flashing. Also, reboot doesn't work anymore (it hangs) and I have to use killall init to reboot the machine. I have tried running tracd in the background, by appending & to the last line of S81trac. After rebooting, the blue light stops flashing. But ps | grep tracd is empty and I can't connect to the trac instance from my PC. I guess I'm doing something wrong here, but what?

  Read the article

• How many hours of use before I need to clean a tape drive?

  - by codeape

  I do backups to a HP Ultrium 2 tape drive (HP StorageWorks Ultrium 448). The drive has a 'Clean' LED that supposedly will light up or blink when the drive needs to be cleaned. The drive has been in use since october 2005, and still the 'Clean' light has never been lit. The drive statistics are: Total hours in use: 1603 Total bytes written: 19.7 TB Total bytes read: 19.3 TB My question is: How many hours of use can I expect before I need to clean the drive? Edit: I have not encountered any errors using the drive. I do restore tests every two months, and every backup is verified. Edit 2: The user manual says: "HP StorageWorks Ultrium tape drives do not require regular cleaning. An Ultrium universal cleaning cartridge should only be used when the orange Clean LED is flashing." Update: It is now May 2010 (4.5 years of use), and the LED is still off, I have not cleaned, backups verify and regular restore tests are done.

  Read the article

• laptop does not boot

  - by devan

  I have hp probook 4520s lap. But now it does not boot. When I press switch on button fans are working but it shows black screen. HDD light just blink one or two times when start but it will not continue. And usually web cam light should blink one time when startup but it doesn't. I connect to different monitor but couldn't see a output. This lap bought 3 months before but it doesn't have international warranty. Therefore I can not do anything. If someone can provide any clue or suggestion that what happened and what should I do, appreciated. thank you.

  Read the article

• Can't turn computer on after re-attaching hard drive

  - by julie

  I have an Eee PC 1008HA. A few days before I got a virus that was preventing the Windows to boot but I could turn the computer on. I opened (disassembled) the Eee PC, then disconnected the hard disk. I connected the hard disk to another computer and copied my files. When I connected again the hard disk to my Eee PC and closed (assembled) it , I cannot turn the Eee PC on. Even when I connect the wire for charging, neither the charging light nor any other lights light up.

  Read the article

• How to get access to console to reset Cisco 3750?

  - by genehack

  I acquired two Cisco 3750 switches from another part of my organization. I was able to complete the standard password/config reset procedure on one without any issues -- boot it, put it into express config mode, telnet in, reset the passwords, etc. The second one doesn't ever boot to the point where it displays anything on the console. When power cycled, the 'SYST' light flashes green a few times, then comes on a solid green and stays lit. None of the other lights ever flash or light up. Holding down the 'MODE' button for up to 30 seconds produces no noticeable effects. Nothing ever comes out on the console. Since I was able to configure the first one without any problems, I know my connectinon is good -- console port configured right, good cable, etc. Is this just a hardware problem with the switch? Is there any way I can recover from this and get the switch back into a state where I can configure it?

  Read the article

• Is it my motherboard?

  - by jarodrussell

  Early this week my home server (a Linux machine) threw a kernel panic. Yesterday is happened a couple of times. Then all of a sudden, when I plugged a USB stick in to run a memory test, the monitor stopped coming on. Now whenever I turn it on, the system gets power...I heard the drives spin, I see the processor fan spin, and the hard drive light comes on...but nothing happens. I put a video card in the AGP slot, but still nothing. The light on the power button that usually comes on stopped coming on. I took the memory out to see if it would beep, but nothing beeped. It's like it's getting power, but it's not coming on. Does this sound like a motherboard problem to anyone else? I think it is, but a second opinion would be greatly appreciated. Thanks.

  Read the article

• Live wallpaper settings not applying

  - by Steve

  I have added settings to my live wallpaper but they are not being applied when changed. I would greatly appreciate it if someone could tell me why my settings are not being applied when changed. Here is my code: settings.xml <PreferenceCategory android:title="@string/more"> <PreferenceScreen android:title="@string/more"> <intent android:action="android.intent.action.VIEW" android:data="market://search?q=pub:PSP Demo Center" /> </PreferenceScreen> <ListPreference android:persistent="true" android:enabled="true" android:entries="@array/settings_light_number_options" android:title="@string/settings_light_number" android:key="light_power" android:summary="@string/settings_light_number_summary" android:defaultValue="3" android:entryValues="@array/settings_light_number_optionvalues" /> <ListPreference android:persistent="true" android:enabled="false" android:entries="@array/settings_speed_number_options" android:title="@string/settings_speed_number" android:key="speed" android:summary="@string/settings_speed_number_summary" android:defaultValue="10" android:entryValues="@array/settings_speed_number_optionvalues" /> <ListPreference android:persistent="true" android:enabled="false" android:entries="@array/settings_rotate_number_options" android:title="@string/settings_rotate_number" android:key="rotate" android:summary="@string/settings_rotate_number_summary" android:defaultValue="8000" android:entryValues="@array/settings_rotate_number_optionvalues" /> </PreferenceCategory> </PreferenceScreen> Settings.java public class GraffitiLWPSettings extends PreferenceActivity implements SharedPreferences .OnSharedPreferenceChangeListener { public static final String SHARED_PREFS_NAME = "wallpaper_settings"; protected void onCreate(Bundle icicle) { super.onCreate(icicle); getPreferenceManager(). setSharedPreferencesName(GraffitiLWP.SHARED_PREFS_NAME); addPreferencesFromResource(R.xml.settings); getPreferenceManager().getSharedPreferences(). registerOnSharedPreferenceChangeListener(this); } protected void onResume() { super.onResume(); } protected void onDestroy() { getPreferenceManager().getSharedPreferences() .unregisterOnSharedPreferenceChangeListener(this); super.onDestroy(); } public void onSharedPreferenceChanged(SharedPreferences sharedPreferences, String key) { } } wallpaper.java public class GraffitiLWP extends Wallpaper { private GraffitiLWPRenderer mRenderer; public static final String SHARED_PREFS_NAME = "wallpaper_settings"; public Engine onCreateEngine() { mRenderer = new GraffitiLWPRenderer(this); return new WallpaperEngine( this.getSharedPreferences(SHARED_PREFS_NAME, Context.MODE_PRIVATE), getBaseContext(), mRenderer); } } renderer.java public class GraffitiLWPRenderer extends RajawaliRenderer { private Animation3D mAnim; private BaseObject3D mCan; private SettingsUpdater settingsUpdater; //private SharedPreferences preferences; public GraffitiLWPRenderer(Context context) { super(context); setFrameRate(20); } public class SettingsUpdater implements SharedPreferences .OnSharedPreferenceChangeListener { private GraffitiLWPRenderer renderer; public SettingsUpdater(GraffitiLWPRenderer renderer) { this.renderer = renderer; } public void onSharedPreferenceChanged( SharedPreferences sharedPreferences, String key) { preferences.getInt("wallpaper_settings", 0); renderer.setSharedPreferences(preferences); } } public void initScene() { System.gc(); ALight light = new DirectionalLight(); light.setPower(this.preferences.getLong("light_power", 3)); light.setPosition(0, 0, -10); mCamera.setPosition(0, -1, -7); mCamera.setLookAt(0, 2, 0); mCamera.setFarPlane(1000); ObjParser parser = new ObjParser(mContext .getResources(), mTextureManager, R.raw.spraycan_obj); parser.parse(); mCan = parser.getParsedObject(); mCan.addLight(light); mCan.setScale(1.2f); addChild(mCan); Number3D axis = new Number3D(0, this.preferences.getLong("speed", 10), 0); axis.normalize(); mAnim = new RotateAnimation3D(axis, 360); mAnim.setDuration(this.preferences.getLong("rotate", 8000)); mAnim.setRepeatCount(Animation3D.INFINITE); mAnim.setInterpolator(new AccelerateDecelerateInterpolator()); mAnim.setTransformable3D(mCan); setSkybox(R.drawable.posz, R.drawable.posx, R.drawable.negz, R.drawable.negx, R.drawable.posy, R.drawable.negy); } public void onSurfaceCreated(GL10 gl, EGLConfig config) { settingsUpdater = new SettingsUpdater(this); this.preferences.registerOnSharedPreferenceChangeListener( settingsUpdater); settingsUpdater.onSharedPreferenceChanged(preferences, null); super.onSurfaceCreated(gl, config); mAnim.start(); } public void onDrawFrame(GL10 glUnused) { super.onDrawFrame(glUnused); mSkybox.setRotY(mSkybox.getRotY() + .5f); } } I know the code is long but I would greatly appreciate any help that someone could give me. Thank you.

  Read the article

• Very different font sizes across browsers

  - by Yang

  Chrome/WebKit and Firefox have different rendering engines which render fonts differently, in particular with differing dimensions. This isn't too surprising, but what's surprising is the magnitude of some of the differences. I can always tweak individual elements on a page to be more similar, but that's tedious, to say the least. I've been searching for more systematic solutions, but many resources (e.g. SO answers) simply say "use a reset package." While I'm sure this fixes a bunch of other things like padding and spacing, it doesn't seem to make any difference for font dimensions. For instance, if I take the reset package from http://html5reset.org/, I can show pretty big differences (note the layout dimensions shown in the inspectors). [The images below are actually higher res than shown/resized in this answer.] <h1 style="font-size:64px; background-color: #eee;">Article Header</h1> With Helvetica, Chrome is has the shorter height instead. <h1 style="font-size:64px; background-color: #eee; font-family: Helvetica">Article Header</h1> Using a different font, Chrome again renders a much taller font, but additionally the letter spacing goes haywire (probably due to the boldification of the font): <style> @font-face { font-family: "MyriadProRegular"; src: url("fonts/myriadpro-regular-webfont.eot"); src: local("?"), url("fonts/myriadpro-regular-webfont.woff") format("woff"), url("fonts/myriadpro-regular-webfont.ttf") format("truetype"), url("fonts/myriadpro-regular-webfont.svg#webfonteknRmz0m") format("svg"); font-weight: normal; font-style: normal; } @font-face { font-family: "MyriadProLight"; src: url("fonts/myriadpro-light-webfont.eot"); src: local("?"), url("fonts/myriadpro-light-webfont.woff") format("woff"), url("fonts/myriadpro-light-webfont.ttf") format("truetype"), url("fonts/myriadpro-light-webfont.svg#webfont2SBUkD9p") format("svg"); font-weight: normal; font-style: normal; } @font-face { font-family: "MyriadProSemibold"; src: url("fonts/myriadpro-semibold-webfont.eot"); src: local("?"), url("fonts/myriadpro-semibold-webfont.woff") format("woff"), url("fonts/myriadpro-semibold-webfont.ttf") format("truetype"), url("fonts/myriadpro-semibold-webfont.svg#webfontM3ufnW4Z") format("svg"); font-weight: normal; font-style: normal; } </style> ... <h1 style="font-size:64px; background-color: #eee; font-family: Helvetica">Article Header</h1> I've tried a few resets/normalize packages to no avail. I just wanted to confirm here that this is indeed a fact of life (even omitting the more glaring offenders like IE and mobile) and I'm not missing some super-awesome solution to this mess.

  Read the article

• LAN cable not connected, but it is

  - by Koen

  I have a Windows XP SP2 desktop PC. It connects to the internet with a LAN cable (there's a wireless router for my laptop in between). The problem should be software because: when i tried connecting the same LAN cable to my laptop it works when i plugin the LAN cable (onboard) the green light is on and the orange light flickers when i tried the other cable (that feeds the wireless router) i have the same problem it worked a few days ago, nothing specific changed I tried removing the ethernet card from the device manager, and windows automatically reinstalled it. What could cause this? What can I try?

  Read the article

• Keyboard doesn't work after Windows resume from sleep (S3) -- how to fix?

  - by Marco Z

  I have a weird issue with my keyboard after resuming from S3 sleep: I can type perfectly for maybe 5 seconds, but afterwards the keyboard ceases to work until I hibernate or restart (or sleep again -- see below.) The rest of my system runs just fine -- just the keyboard apparently "freezes" up. Some closer observations: The keyboard will work for 5 seconds (and freeze again) every time I resume from sleep, even if it was frozen from a previous sleep The caps lock light will work fine within the 5 seconds. But after the keyboard "freezes", the light will remain on, but I'll be unable to turn it off. Perhaps this means power wasn't cut off from the keyboard, but it's just some software freezing up the port??? Given this info, would this indicate a problem with Windows itself? Drivers, maybe? Can I rule out the BIOS as the culprit? Finally, any ideas on how to fix? Thanks! Specs: Windows 7 x64 HP tx1000 laptop

  Read the article

• Windows 8.1 backlight turns off

  - by tenhouse

  This is one of the strangest things I have ever seen. I have an HP Elitebook 8460p and recently updated my Windows 8 to Windows 8.1. Now when I have certain windows open and focused (it's always different, sometimes it's chrome, sometimes it's the control-panel and so on, there is no clear pattern) the backlight of the screen is completely turned off - when I take a torch and point it to the screen or hold it to a bright-light source I can see there is still a picture there you can even work (or better said you cuold if you'd see anything). When I tab to certain other windows the screen goes back to normal back light - I can then tab back to the other window and the backlight will be turned off again. I have no idea what's going on and also no idea what information you need. The display-adapter I got is the AMD Radeon HD 6400M - I tried updating to the newest driver but that didn't help. Here's a video of the whole thing: http://www.youtube.com/watch?v=kIV_Q8uayUA

  Read the article

• HP Deskjet 3600: Offline and won't stop blinking and won't print.

  - by George Bailey

  Using Vista and an HP Deskjet 3600 on USB connection Normally when I unplug the printer, I open the printer queue and in the title bar it says "HP Deskjet 3600 - Use Printer Offline" then the offline message will go away and it will start printing. But for some reason, the bower button light is continually blinking. (this is the only light on the machine). The printer queue says "HP Deskjet 3600 - Offline" and when I unplug it it says "HP Deskjet 3600 - Offline - Use Printer Offline". I have tried unplugging it for a few hours, also tried turning it off for a few hours. Does anybody know what the single word Offline means? Does anybody know how I can clear out the memory in the Printer? (this is my guess as to what is causing the problem)

  Read the article

• further troubleshooting on a p8z77 motherboard

  - by Journeyman Geek

  I just bought a brand now asus p8z77 motherboard with a intel 3770. Its currently not booting - the system powers up for half a second and then powers down, and the CPU error light shines. I've tried switching ram between slots, switching PSUs, updating the bios (which can be done sans processor or ram on this model). Power: The 8 pin power connector is definitely in place correctly, and I've tried swapping PSUs between a new seasonic m12, and a known good cheapie PSU Ram: Ram is in the recommended slot for single stick operation, and tried swapping between the two sticks of DDR3 I have. Processor: Its installed correctly as far as I can tell, no obvious bent pins on the motherboard. At this point I'm guessing I'll need to RMA something. Are there any 'definitive' tests I can try, short of swapping CPU and motherboard that would let me know it is the CPU? Can I actually trust the error light on the motherboard?

  Read the article

• Strange monitor issue - screen goes black after a few seconds

  - by Scott Szretter

  My LCD monitor display is going black (turning off). It's a Samsung SYncMaster 2233 widescreen. I am trying to figure out if there is anything I can do about it, or if the monitor is junk. I have tried multiple computers, all have the same issue. I have tried a different vga cable, same issue. Power and video cables are tight / double checked. When I power on the monitor, the blue light turns on at the bottom. Then a second or two later the video comes up as expected and it looks fine. However, about 2-3 seconds after that, the screen goes black. The blue light is still on and solid at the bottom (blue light normally flashes when the monitor is sleeping). If I power cycle the monitor, same thing happens. With no computer connected or when I unplug the vga cable, I see the searching for signal message "digital", then the screen goes black. However it usually shows "digital" then "analog" after that and switches between the two a few times. The buttons on the side do not do anything, although they may be, I just can not see if they are or not. I can usually get the "digital" message by pressing the buttons on the side, but then it quickly goes black again. What is really strange is sometimes I can get it to work fine. I am not sure what the difference is. Last week I connected it up and it worked fine and it stayed fine for at least a week! I did not turn it off or anything, I just let the OS put the display to sleep. Then this week one morning I started having the screen going black issue again. Seems like something is either loose inside or beginning to fail. Do you think there is any hope for it? update: pushing the input select button causes the "digital" and "analog" messages to flash on the screen, but only for a few seconds then it goes black. When it was working properly, those messages would flash back and fourth for probably 10-20 seconds then a message would show saying check input signal, but now just a black screen.

  Read the article

• Backlight dimming don't work

  - by Mathias

  My Packard Bell EasyNote TS11HR notebook does not have an option for dimming the display backlight. At night, my eyes begin to hurt because of the strong light from the screen. My laptop is 2-3 months old and I am sure it has worked before. When I click on the battery icon in the notification area, it says in my language (Danish): "the setting for light does possibly reduce the life of the battery". However, I cannot dim the backlight. I have tried downloading programs for dimming the screen but they only make the screen darker, instead of dimming the backlight. I have tried updating my drivers and looking in the BIOS for a setting. I also plan to use an Ubuntu LiveCD to try controlling it. As of now though, the backlight is locked at maximum. Any ideas?

  Read the article

• My 386sx refuses to start in cold days

  - by Armadillo

  My old computer refuses to start in cold days. So, in really hot days (about 40ºC / 104ºF ) or even hotter, this PC usually starts, but in cold days, it wont. When the temperature is not in the "sweet-spot" the power light turns on for an half a second and then the computer turns off. But when it's really cold, not even the power light turns on, nor even a blink. Sometimes I use an Hair dryer, pointed directly to the PSU and that works great. 5 to 10 minutes is enough, depending on the ambient temperature. I think something is going wrong in my AT power supply. I can't replace this PSU for another because it has a non-standard size and connectors to power the motherboard. Does anybody have a clue about what it's failing in my PSU, so I can change that component (resistor, capacitor, ??, etc) and rock on with my 80386? Thanks

  Read the article

• Computer stopped working (ASUS P5GD1-VM)

  - by Gordonrjones

  My computer stopped working the other day. I came down and it was kind of chirping away. Then, when I restarted it, it only did the same thing. I unplugged everything not needed and it did nothing at all. I thought maybe the power supply wasn't working, but when I took the cover off the green light on the motherboard was on and the power supply is making a little buzzing sound. But nothing happens when I turn the computer on, other than the green light on the motherboard flickers a bit. I checked the memory in other computer and it works fine. I'd love to be able to fix this with as little cost as possible. Can someone here help? P4-640 (3.2E GHz, 800 FSB, L2:2MB, EM64T, HT)

  Read the article

• How many hours of use before I need to clean a tape drive?

  - by codeape

  I do backups to a HP Ultrium 2 tape drive (HP StorageWorks Ultrium 448). The drive has a 'Clean' LED that supposedly will light up or blink when the drive needs to be cleaned. The drive has been in use since october 2005, and still the 'Clean' light has never been lit. The drive statistics are: Total hours in use: 1603 Total bytes written: 19.7 TB Total bytes read: 19.3 TB My question is: How many hours of use can I expect before I need to clean the drive? Edit: I have not encountered any errors using the drive. I do restore tests every two months, and every backup is verified. Edit 2: The user manual says: "HP StorageWorks Ultrium tape drives do not require regular cleaning. An Ultrium universal cleaning cartridge should only be used when the orange Clean LED is flashing." Update: It is now May 2010 (4.5 years of use), and the LED is still off, I have not cleaned, backups verify and regular restore tests are done.

  Read the article

• Lightest way to run Google Hangouts Chrome app on Mac

  - by jadengore

  I recently transitioned to Safari because I'm really tired of how Chrome hogs memory and drains my battery like crazy. The only thing that has been keeping the Chrome icon open is the Hangouts plugin. Basically, I am looking for the lightest way to run Hangouts on my Mac. By light, I mean the least amount of RAM usage, and preferably a way to do it without Chrome open/light version of Chrome that only opens extensions. Any suggestions? EDIT: Another thing I noticed was that Hangouts ignores your default browser if links are sent to you by chat, and when clicked they open in Chrome. My question doesn't relate to this at all, but I found it interesting...

  Read the article

• MSWord table shading prints too dark

  - by Relaxed1

  My friend has a very light shading in his MSWord tables. However they still print too dark to read the text. When emailed to a colleague using the same printer, it prints light nicely. However they cannot find any setting that is different between them. Any ideas? Thanks! (P.s. for myself this would help for non-tables also, when 'highlighting' text. I do know that 'shading' gives more colour options for non-tables, but it would be nice to know anyway. Thanks)

  Read the article

• Webby Nominations for Retail

  - by David Dorf

  The Webby Awards were created back in 1996 when the internet was just a baby. This is their 14th year of highlighting excellence on the Web, and there are lots of great nominations. Its quite amazing to see the rich content and interactivity of today's websites. Some interesting nominees for this year are: Sephora did a campaign at Christmas, and what remains of the Sephora Clause website is a bunch of wishes. The Starbucks "All you need is Love" campaign has lots of cool videos. The Sound Check from Walmart highlights raising music artists. Refinery29 has their fashion info hub. The five nominees in the retail category are: Bugaboo.com's website for selling high-end baby strollers. If you're looking for a high-end bag, check out Crumpler's flash-based e-commerce site. It's highly interactive, but a little on the slow side. I Make My Case sells custom designed iPod/iPhone and Blackberry cases. At MOO.com, they love to print. Tons of art for printing customized business cards, post cards, etc. If you want light shoes, check out Puma L.I.F.T. and see just how light shoes can weigh. Check them out, cast a few votes, and see if you're inspired to create something even better.

  Read the article

• CodePlex Daily Summary for Friday, March 05, 2010

  CodePlex Daily Summary for Friday, March 05, 2010New Projects.svn Folders Cleanup Tool: dotSVN Cleanup is a tool that allows you to remove the .svn folders . Just click, browse, say abracadabra ...and the magic is done. Have fun with...Accord: The Accord framework creates an easy we to integrate any Dependency Injection framework into your project, while abstracting the details of your im...Asp.net MVC Lab: Try asp.net mvc outASP.NET Themes management with Webforms: The provided source is an example for how to use themes in ASP.NET Webforms. this source is the "up to date" support for the article I wroteB&W Port Scanner: B&W Port Scanner (formerly Net Inspector) is a fast TCP Port scan utility. The main idea is support of customizable operations to be performed f...BizTalk SWAT - Simple Web Activity Tracker: This is a web based version of BizTalk HAT. The concept is designed to be able to share and enable sharing of orchestration info easily. Some of th...C# Linear Hash Table: A C# dictionary-like implementation of a linear hash table. It is more memory efficiant than the .NET dictionary, and also almost as fast. NOTE: On...DBF Import Export Wizard: DBF Import Export Wizard is a tool for anyone needing to import DBF files into SQL Server or to export SQL Server tables to a DBF file. This proje...Domain as XML - Driven Development: Visual Studio Code Samples: Domain as XML - Driven Development: Visual Studio Code SamplesEasyDownload: This application allows to manage downloads handling an stack of files and several useful configurationsEos2: .FlightTickets: This application allows to buy flight ticketsFotofly PhotoViewer: A Silverlight control that uses the Fotofly metadata library to show the people in a photo (using Windows Live Photo Gallery People metadata) and a...Fujiy source code: Source code examplesGameSet: This application allows to play games with distributed users.Injectivity (Dependency Injection): Injectivity is a dependency injection framework (written in C#) with a strong focus on the ease of configuration and performance. Having been writt...Inventory: Keep track of inputs, materias and salesLoanTin.Com Source Code: LoanTin.Com - a Social Networking Website as same as Tumblr.com, based on source code of Loantiner Project, allow anyone can share anything to anyo...mysln: my solutions.NumTextBox: TextBox控件重写 之NumTextBox，主要实现的功能是，只允许输入数字，或String,Numeric,Currency,Decimal,Float,Double,Short,Int,Long 修改自：http://www.codeproject.com/KB/edit/num...Quick Performance Monitor: This small utility helps to monitor performance counters without using the full blown perfmon tool from Windows. It supports a number of command li...Runo: Runo ResearchSales: This application allows to manage a hardware storeScrewWiki Form Auth Provider: Enables your ASP.NET site to use Forms Authentication to integrate with your ScrewWiki. User management is performed on a parent site, and cookie i...SDS: Scientific DataSet library and tools: The SDS library makes it easy for .Net developers to read, write and share scalars, vectors, matrices and multidimensional grids which are very com...ShapeSweeper: Minesweeper-like game for the Zune HD. Each hidden object has three properties to discover--location, color, and shape--and all three must be corre...SilverlightExcel: an Excel file viewer in Silverlight 4: SilverlightExcel is a Silverlight application allowing you to open and view Excel files and also create graphs.sPWadmin: pwAdmin is an Web Interface based on JSP that uses the PW-Java API to control an PW-Server.Video Player control in Silverlight: A control for playing video in Silverlight 4 with chapters on timeline control. This player will be easily skinnable and customizable. More Featur...XNA Light Pre Pass Renderer: A demo/sample that shows how to write a light pre pass renderer in XNA.Zimms: Collaboration Site for friends, a code depot, and scratch padNew Releases.svn Folders Cleanup Tool: dotSVN Cleanup Tool: dotSVN Cleanup Tool executableAccord: Alpha: Initial build of the Accord framework.AcPrac: AcPrac Ver 0.1: The first version of AcPrac. It is not fully functional, but rather a version to get the bugs out. Please report all bugs.ASP.NET: ASP.NET Browser Definition Files: This download contains: ASP.NET 4 Browser Definition Files -- You can use the new ASP.NET 4 browser definition files with earlier versions of ASP....B&W Port Scanner: Black`n`White Port Scanner 1.0: B&W Port Scanner 1.0 Final Release Date: 03.03.2010 Black`n`WhiteBizTalk SWAT - Simple Web Activity Tracker: BizTalk SWAT: This is a web based version of BizTalk HAT. The concept is designed to be able to share and enable sharing of orchestration info easily. It uses th...BTP Tools: CSB+CUV+HCSB dict files 2010-03-04: 5. is now missing a space between the Strong’s number and the Count: >CSB Translation: 圣所 7, 至圣所G39+G394 it should be: CSB Translation: 圣所 7, 至圣所G...C# Linear Hash Table: Linear Hash Table: First working version of the Linear Hash Table.Cassiopeia: WinTools 1.0 beta: First ReleaseComposure: Caliburn-44007-trunk-vs2010.net40: This is a very simple conversion of the Caliburn trunk (rev 44007) for use in Visual Studio 2010 RC1 built against .NET40. Because the conversion w...Cover Creator: CoverCreator 1.3.0: English and Polish version. Functionality to add image to the front page. Load / save covers.DBF Import Export Wizard: DBF Import Export Wizard Source Code: Version 0.1.0.3DBF Import Export Wizard: DBF_Import_Export_Wizard Setup 0.1.0.3: Zip file contains Setup.exeESB Toolkit Extensions: Tellago BizTalk ESB 2.0 Toolkit Extensions v0.2: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...Fotofly PhotoViewer: Fotofly Photoview v0.1: The first public release. Based on a Silverlight application I have been using for over a year at www.tassography.com. This version uses Fotofly v0...HPC with GPUs applied to CG: Cuda Soft Bodies simulation: Cuda src for soft bodiesHPC with GPUs applied to CG: Full Soft Bodies src: full src code for soft bodies simulationInjectivity (Dependency Injection): 2.8.166.2135: Release 2.8.166.2135 of the Injectivity dependency injection framework.Line Counter: 1.5 (Code Outline Preview): This version contains preview of the code outline feature, you can now view C# code outline within Line Counter. Note that the code outline now onl...Micajah Mindtouch Deki Wiki Copier: MicajahWikiCopier: You should use the following line arguments: WikiCopier.exe "http://oldwikiwithdata.wik.is/@api/deki" "login" "password" "http://newwiki.somename.l...ncontrols: Alpha 0.4.0.1: Added some example on the Console Project.NumTextBox: NumTextBox初始版本: TextBox控件重写 之NumTextBox，主要实现的功能是，只允许输入数字，或String,Numeric,Currency,Decimal,Float,Double,Short,Int,Long 此为初始版本PSCodeplex: PS CodePlex 0.2: PS CodePlex 0.2 has some breaking changes to the parameters. A few of the parameters are renamed and a few are made as switch parameters. Add-Rele...Quick Performance Monitor: QPerfMon First release - Version 1.0.0: The first release of the utility.RapidWebDev - .NET Enterprise Software Development Infrastructure: ProductManagement Quick Sample 0.2: This is a sample product management application to demonstrate how to develop enterprise software in RapidWebDev. The glossary of the system are ro...ScrewWiki Form Auth Provider: ScrewWiki Forms Authentication: Initial ReleaseSee.Sharper: See.Sharper.Docs-1.10.3.4: HTML documentation (including Doxygen project)See.Sharper: See.Sharper-1.10.3.4: Solution (Source files, debug and release binaries)Solar.Generic: Solar.Generic 0.8.0.0 Beta (Revised, Renamed): Solar.Generic 0.8.0.0 (Revised & Renamed) Renamed project from Solar.Commons to Solar.Generic. Project solution file is now in format of Visual ...Solar.Security: Solar.Security 1.1.0.0: Performed several major refactorings of code base. Stripped In-Memory implementation of IConfiguration interface of transactional behavior due to...sPWadmin: pwAdmin v0.7: -Star System Simulator: Star System Simulator 2.3: Changes in this release: Fixed several localisation issues. Features in this release: Model star systems in 3D. Euler-Cromer method. Improved...SysI: sysi, stable and ready: This time for sure.TheWhiteAmbit: TheWhiteAmbit - Demo: Two little demos demonstrating: - fast realtime raytracing - generating bent normals for shading (CUDA capable GPU needed = nVidia GeForce >8x00)VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 22 Beta: Build 22 (beta) New: Visual Studio 2010 RC support (VsTortoise for Visual Studio 2010 RC screenshots) New: VsTortoise integrates in to Solution E...WinMergeFS: WinMergeFS 0.1.42128alpha: WinMergeFS provides AuFS functionality for windows. With WinMergeFS users can mount multiple directories into a virtual drive. Plugin based root se...WSDLGenerator: WSDLGenerator 0.0.0.2: - Bugs fixed - Code refactored - Added support for custom typesXNA Light Pre Pass Renderer: LightPrePassRendererXNA: Zipped source code for the light pre pass renderer made with XNA.Most Popular ProjectsMetaSharpRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)LiveUpload to FacebookASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsUmbraco CMSRawrBlogEngine.NETSDS: Scientific DataSet library and toolsMapWindow GISpatterns & practices – Enterprise LibraryjQuery Library for SharePoint Web ServicesIonics Isapi Rewrite FilterMDT Web FrontEndDiffPlex - a .NET Diff Generator

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >