Search Results

Search found 892 results on 36 pages for 'unavailable'.

Page 27/36 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Which events specifically cause Windows 2008 to mark a SAN volume offline?

  - by Jeremy

  I am searching for specific criteria/events that will cause Windows 2008 to mark a SAN volume as offline in disk management, even though it is connected to that SAN volume via FC or iSCSI. Microsoft states that "A dynamic disk may become Offline if it is corrupted or intermittently unavailable. A dynamic disk may also become Offline if you attempt to import a foreign (dynamic) disk and the import fails. An error icon appears on the Offline disk. Only dynamic disks display the Missing or Offline status." I am specifically wondering if, on the SAN, changing the path to the disk (such as the disk being presented to the host via a different iSCSI target IQN or a different LUN #) would cause a volume to be offlined in disk management. Thanks! Edit: I have already found two reasons why a disk might be set offline, disk signature collisions and the SAN disk policy. Bounty would be awarded to someone who can find further documented reasons related to changes in the volume's path. Disk signature collisions: http://blogs.technet.com/b/markrussinovich/archive/2011/11/08/3463572.aspx SAN disk policy: http://jeffwouters.nl/index.php/2011/06/disk-offline-with-error-the-disk-is-offline-because-of-a-policy-set-by-an-administrator/

  Read the article

• Using fedora 17 commandline 'mail' program cannot send to hotmail

  - by Eric Leschinski

  I am trying to use the console in Fedora 17 to send an automated email to myself. I run this: echo "email content" | mail -s "blah" [email protected] It works fine, google treats it as a spam email, but when you mark it not spam everything is cool. For Hotmail there are policies to prevent the email from being sent. I do this: echo "email content" | mail -s "blah" [email protected] And the email returns as undeliverable, the email does not even appear in the spam folder and I get this as a response: ----- Transcript of session follows ----- ... while talking to mx3.hotmail.com.: >>> MAIL From:<[email protected]> SIZE=685 <<< 550 DY-001 (BAY0-MC3-F8) Unfortunately, messages from 184.90.101.28 weren't sent. Please contact your +Internet service provider. You can tell them that Hotmail does not relay dynamically-assigned IP ranges. +You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. 554 5.0.0 Service unavailable So apparently hotmail doesn't like spammers so much, they they are blocking anything with a dynamically assigned IP range. Google does not do this. What is the easiest way to just get around this and send an email to hotmail and end up in their spam folder to be unblocked later by the user?

  Read the article

• Extremely high mysqld CPU usage with no active queries

  - by RadarNyan

  I have a VPS running Ubuntu 12.04 LTS with LEMP stack, followed the guide from Linode Library (since I'm using a Linode) to setup, and everything worked fine until now. I don't know what's wrong, but my CPU usage just goes up since a week ago. Today things getting really bad - I got 74% CPU usage so I went check and found that mysqld taking too much CPU usage (somewhere around 30% ~ 80%) So I did some Google Search, tried disable InnoDB, restart mysql, reset ntp / system clock (Isn't this bug supposed to happen more than a year ago?!) and reboot my VPS, nothing helped. Even with mysql processlist empty, I still get mysqld CPU usage very high. I don't know what I missed and have totally no idea, any advice would be appreciated. Thanks in advance. Update: I got these from running "strace mysqld" write(2, "InnoDB: Unable to lock ./ibdata1"..., 44) = 44 write(2, "InnoDB: Check that you do not al"..., 115) = 115 select(0, NULL, NULL, NULL, {1, 0}^[[A^[[A) = 0 (Timeout) fcntl64(3, F_SETLK64, {type=F_WRLCK, whence=SEEK_SET, start=0, len=0}, 0xbfa496f8) = -1 EAGAIN (Resource temporarily unavailable) hum... I did tried to disable InnoDB and it didn't fix this problem. Any idea? Update2: # ps -e | grep mysqld 13099 ? 00:00:20 mysqld then use "strace -p 13099", the following lines appears repeatedly: fcntl64(12, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(12, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(12, {sa_family=AF_FILE, NULL}, [2]) = 14 fcntl64(12, F_SETFL, O_RDWR) = 0 getsockname(14, {sa_family=AF_FILE, path="/var/run/mysqld/mysqld.sock"}, [30]) = 0 fcntl64(14, F_SETFL, O_RDONLY) = 0 fcntl64(14, F_GETFL) = 0x2 (flags O_RDWR) setsockopt(14, SOL_SOCKET, SO_RCVTIMEO, "\36\0\0\0\0\0\0\0", 8) = 0 setsockopt(14, SOL_SOCKET, SO_SNDTIMEO, "<\0\0\0\0\0\0\0", 8) = 0 fcntl64(14, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(14, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported) futex(0xb786a584, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0xb786a580, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0xb7869998, FUTEX_WAKE_PRIVATE, 1) = 1 poll([{fd=10, events=POLLIN}, {fd=12, events=POLLIN}], 2, -1) = 1 ([{fd=12, revents=POLLIN}]) er... now I totally don't get it x_x help

  Read the article

• Administrator view all mapped drives

  - by kskid19

  In my understanding of security, an administrator should be able to view all connections to and from a computer - just as they can view all processes/owner, network connections/owning process. However, Windows 8 seems to have disabled this. As administrator running an elevated in Win Vista+ when you run net use you get back all drives mapped, listed as unavailable. In Windows 8, the same command run from an elevated prompt returns "There are no entries in the list". The behavior is identical for powershell Get-WmiObject Win32_LogonSessionMappedDisk. A workaround for persistent mappings is to run Get-ChildItem Registry::HKU*\Network*. This does not include temporary mappings (in my particular example it was created through explorer on an administrator account and I did not select "Reconnect at sign-in") Is there a direct/simple way for Administrator to view connections of any user (short of a script that runs under each user context)? I have read Some Programs Cannot Access Network Locations When UAC Is Enabled but I do not think it particularly applies. ServerFault has an answer, but it still does not address non-persistent drives How can I tell what network drives users have mapped?

  Read the article

• Symantec Backup Exec 12 Tape Alert.

  - by Adam

  Every day, I run 5 backups using 6 tapes. Each day, when I run the inventory, I get a tape alert Error. This occurs every day, on the same job. The error is: Job 'Inventory Daily ********' has reported Multiple Tape Alerts on server '******' Please refer to job log *****.xml for more information. When i look at the Job log, the Utility Job Information says: The device has reported the following TapeAlert diagnostic information Information- The library has been manually turned offline and is unavailable for use. Robotic library for device: PV132T 500 Warning - Library security has been compromised. Robotic Library for device: PV132T 500. Critical - The library has detected a inconsistency in its inventory. 1.Redo the library inventory to correct the inconsistency. 2. Restart the operation. Check the applications users manual or hardware users manual for specific instructions on redoing the library inventory. Roboric Library for Device PV132T 500. When I run the same inventory for a second time, the job completes successfully. I am using Symantec Backup Exec 12 running on Windows Server 2008. I am using a Dell Powervault 132T 500 tape drive. If anyone can help me on how to resolve this problem, it would be very much appreciated.

  Read the article

• Administrator view ALL mapped drives

  - by kskid19

  In my understanding of security, an administrator should be able to view all connections to and from a computer - just as they can view all processes/owner, network connections/owning process. However, Windows 8 seems to have disabled this. As administrator running an elevated in Win Vista+ when you run net use you get back all drives mapped, listed as unavailable. In Windows 8, the same command run from an elevated prompt returns "There are no entries in the list". The behavior is identical for powershell Get-WmiObject Win32_LogonSessionMappedDisk. A workaround for persistent mappings is to run Get-ChildItem Registry::HKU*\Network*. This does not include temporary mappings (in my particular example it was created through explorer on an administrator account and I did not select "Reconnect at sign-in") Is there a direct/simple way for Administrator to view connections of any user (short of a script that runs under each user context)? I have read Some Programs Cannot Access Network Locations When UAC Is Enabled but I do not think it particularly applies. I have seen this answer, but it still does not address non-persistent drives How can I tell what network drives users have mapped?

  Read the article

• I get "An error occurred while Windows was synchronizing with [name of time server]." when trying t

  - by ChrisF

  Prompted by the answers to this question I decided to give the Windows built in time synchronisation another go. However, no matter what time server I use I get this error: "An error occurred while Windows was synchronizing with [name of time server]." The help suggests the following as reasons for failure: You are not connected to the Internet. Establish an Internet connection before you attempt to synchronize your clock. Your personal or network firewall prevents clock synchronization. Most corporate and organizational firewalls will block time synchronization, as do some personal firewalls. Home users should read the firewall documentation for information about unblocking network time protocol (NTP). You should be able to synchronize your clock if you switch to Windows Firewall. The Internet time server is too busy or is temporarily unavailable. If this is the case, try synchronizing your clock later, or update it manually by double-clicking the clock on the taskbar. You can also try using a different time server. The time shown on your computer is too different from the current time on the Internet time server. Internet time servers might not synchronize your clock if your computer's time is off by more than 15 hours. To synchronize the time properly, ensure that the date and time settings are set close to your current time in the Date and Time Properties in Control Panel. Now the first reason is clearly wrong - I am connected to the internet. I can see the 2nd being the most likely cause. I have Sygate Personal Firewall running, but it normally asks if something it trying to connect for the first time. Does anyone know I can unblock the NTP protocol - or at least check if it is blocked?. I don't think it's #3 or #4 as I've tried a number of different servers including the one currently used by Atomic Clock Sync. Though if someone knows the address of a UK time server I can double check this.

  Read the article

• How to automatically restart Apache service after HTTP 503 error?

  - by Gnanam

  Our production server is running Apache v2.2.4 on CentOS5.2. Mono v1.2.4 is integrated within Apache. Recently, we faced a problem in our production server. From Apache's access_log, I found a HTTP 500 internal server error for one of the HTTP request and all subsequent HTTP requests also failed but with HTTP 503 service unavailable error. From thereafter, none of the requests were successful. Also, only later some time, we realized that our application was not working because of this error and then we restarted Apache service. My questions are, in this kind of situation, how do I automatically restart Apache service when HTTP 503 error is encountered? Is there any Apache directive available to set? in general, what would cause a HTTP 503 error in Apache? NOTE: Mono helps in running applications developed in .NET on a Linux-based OS. EDIT: I agree on finding the root cause of this problem. In fact, we've been analyzing that too. Till we resolve it, am finding whether this could be restarted immediately on its own without having any downtime/service disruption for application users.

  Read the article

• How do I log back into a Windows Server 2003 guest OS after Hyper-V integration services installs and breaks my domain logins?

  - by Warren P

  After installing Hyper-V integration services, I appear to have a problem with logging in to my Windows Server 2003 virtual machine. Incorrect passwords and logins give the usual error message, but a correct login/password gives me this message: Windows cannot connect to the domain, either because the domain controller is down or otherwise unavailable, or because your computer account was not found. Please try again later. If this message continues to appear, contact your system administrator for assistance. Nothing pleases me more than Microsoft telling me (the ersatz system administrator) to contact my system administrator for help, when I suspect that I'm hooped. The virtual machine has a valid network connection, and has decided to invalidate all my previous logins on this account, so I can't log in and remotely fix anything, and I can't remotely connect to it from outside either. This appears to be a catch 22. Unfortunately I don't know any non-domain local logins for this virtual machine, so I suspect I am basically hooped, or that I need ophcrack. is there any alternative to ophcrack? Second and related question; I used Disk2VHD to do the conversion, and I could log in fine several times, until after the Hyper-V integration services were installed, then suddenly this happens and I can't log in now - was there something I did wrong? I can't get networking working inside the VM BEFORE I install integration services, and at the very moment that integration services is being installed, I'm getting locked out like this. I probably should always know the local login of any machine I'm upgrading so I don't get stuck like this in the future.... great. Now I am reminded again of this.

  Read the article

• 503 Error After Microsoft Request Routing Is Installed - 32 bit 64 bit madness

  - by KenB

  I have a requirement to install the Microsoft Request Routing component for IIS 7.5 running on a Windows 2008 R2 SP1 64Bit machine. After installing Microsoft Request Routing via the Web Platform installer our ASP.NET 4.0 application gets a "HTTP Error 503. The service is unavailable." The Windows event log error details says: The Module DLL 'C:\Program Files\IIS\Application Request Routing\requestRouter.dll' could not be loaded due to a configuration problem. The current configuration only supports loading images built for a AMD64 processor architecture. The data field contains the error number. To learn more about this issue, including how to troubleshooting this kind of processor architecture mismatch error, see http://go.microsoft.com/fwlink/?LinkId=29349. I can make this error go away by changing the application pool to run in 32 bit mode by changing the "Enable 32-Bit Applications" setting to true. However I would prefer not to have to do that to resolve the issue. My questions are: Why is the Microsoft Request Routing feature trying to load a 32 bit version, isn't there a 64 bit version for it? How do I resolve this issue without having to change my application pool to a 32 bit mode?

  Read the article

• Reliable custom Windows shortcut keys?

  - by Peter Baer

  I have global Windows shortcut keys assigned to several different cmd.exe instances. I do this by creating shortcuts to cmd.exe on my desktop, and assigning each one a unique shortcut key (for example, CTRL + SHIFT + U). Pretty basic stuff. I'm using Win2K8 (R1 and R2). This works just fine... most of the time. But with infuriating regularity, sometimes it doesn't. Or it will work with a long delay (many seconds). It doesn't matter what app currently has focus (it can even be one of the command prompts). It doesn't matter what keys I assign (I've tried a few variations of WIN, CTRL and SHIFT). I did notice that this is often, but not always, correlated with explorer.exe struggling in some way or another (say, an explorer window opened to a file share that's unavailable, or an app being unresponsive, or whatever). In other words the shortcut key handling appears to be very sensitive to unrelated system activity. Note that whenever I have this problem I can always successfully ALT + TAB to the window I want to get to, but that's tedious. I use the shortcuts to these command windows hundreds of times a day so even a 1% failure rate becomes really annoying. Is there a way to fix this, or is there some third-party utility out there that will RELIABLY intercept custom key combinations to bring focus to whatever apps I want, in a way that is independent of other system activity? ADDENDUM: There is a property of the Windows shortcuts that I would not want to lose if switching to a third-party hotkey tool: Windows shortcuts are idempotent. Once you've launched a shortcut to some app, pressing the shortcut key combo again takes you to the already launched process - it does not launch a new process.

  Read the article

• Internet Explorer / Windows 7 does not want to show HTML file from local network drive

  - by Jaanus

  Setup: I have Windows 7 running inside VirtualBox on Mac OS X host. I have a shared drive with some HTML files, that I am mounting as a local drive W: in Windows, from the VirtualBox server \VBOXSVR. I want to look at them with a browser in Windows. Chrome in Windows 7 opens and shows those HTML files just fine (file:///W:/welcome.html). But Internet Explorer does not, and shows this error instead of the files: Internet Explorer cannot display the web page What you can try: [button Diagnose Connection Problems] More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For the internet zone in the status bar, it shows: Internet | Protected Mode: On IE settings are a mystery to me, and I could possibly get it to work by tweaking IE settings, but I don't know which ones. How do I make IE show the same files that Chrome is happy to show? (Chrome showing them means that the files themselves are fine, there is something about the setup that just makes IE be a diva.)

  Read the article

• Juniper router dropping pings to external interface

  - by Alexander Garden

  My organization has a Juniper SSG20-WLAN that routes our traffic to the outside world. We've been having intermittent problems with our internet connection so I wrote up a Python script to ping the internal interface of the router, the external interface, a couple of our internal servers, the ISP router our router talks to, their upstream provider, and Google and Yahoo for good measure. It does that about every minute. What I have found is that when our internet goes out, our Juniper router ceases responding to pings on the external interface. Everything past that is, of course, unreachable. The internal interface and our internal servers continue to echo back without interruption. None of the counters indicate dropped packets of any type. They all look normal. The logs complain about VIP servers being unavailable but otherwise nothing indicative of network issues. My questions are these: Does this exonerate our ISP? Or, contrawise, might a problem with the connection be causing the external interface to go down? Is there somewhere else in the SSG20, beside the system log and counters, that might help me track down info on the problem? UPDATE: Turned out that one of the switches between my monitoring box and the router was a router itself, and occasionally diverting from the gateway to itself. Kudos to those who made suggestions along those lines. Not really sure which answer to mark as accepted, as it was really stuff in the comments that turned out to be right. Thanks for the suggestions.

  Read the article

• Problem running “Central Administration” website after windows update at Windows 2003 Server Standar

  - by Magdy Roshdy

  I was have WSS 2.0 and then I upgraded to WSS 3.0 and the old instalation database was SQL 2000, now I have another SQL Server instance called:server_name\MICROSOFT##SSEE . After upgrade every thing works fine and our team started to use the portal and we sent lot of documents and make lot of activities on it. The problem started after installing Windows updates the website suddenly stopped and giving me an error "Cannot connect to the configuration database" If I tried to open SharePoint Products and Technologies Configuration Wizard it is gives me a strange error says: "An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: SharePoint Products and Technologies cannot be configured. The current installation mode does not support SKU to SKU upgrades because there exists an older version of Windows SharePoint Services that must be upgraded first " At this post:http://stackoverflow.com/questions/114398/iis-error-cannot-connect-to-the-configuration-database/249494#249494 the guy of the second answer have the same problem and he suggested a solution but I don't understand well. I tried as he suggested to make the identity of the app pool of the SharePoint web site as "IWAM_server_name " after that the error changed as he said and I web site give me "Server Application Unavailable " and when checked the Event Viewer at the server I found that ASP.NET 2.0 give this exception: "Could not load file or assembly 'System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. Access is denied ." and I don't know how to solve this problem. I'm really want to make my web site working because our team really need these documents and its stuff. I hope I will find some one to help me.

  Read the article

• Cisco 851 (IOS) router: FastEthernet 4 (WAN) got the shutdown flag.

  - by cjavapro

  At a customer location there was a Cisco 851 router (which uses IOS). The PCs on location were all of a sudden unable to connect. We came on site and found that FastEthernet 4 (the WAN port) was "administratively down". We ran these commands to resolve it config t interface fa4 no shutdown exit exit write Now the mystery is how the shutdown flag got there in the first place? The router was on battery backup... but during the outage it was power cycled by the customer. It is possible that there was a short outage by the ISP and that the power cycle caused the shutdown flag to come up. There may have been a hack or an attack pattern that caused the shutdown flag to come up. There may have been a hack or an attack pattern that the router to become unavailable and then caused the shutdown flag to be added on startup. Question: Does anybody have any clues? or at least remember that they had a shutdown flag come up on their WAN port also?

  Read the article

• Connecting to Server 2008 shares fails

  - by Chris J

  I'm having problems getting a reliable share working on an x64 Server 2008 R1 SP1 server. All works well after a reboot, but after some time (within a day) the shares become unavailable to XP and Server 2003 servers. Interestingly, they remain available to other Server 2008 servers. On trying to access \\server\share, Server 2003 returns immediately and simply gives me the message "The specified network name is no longer available", XP takes a minute or two to timeout before giving the same message. There doesn't seem to be anything in the event logs indicating a problem. Doing some googling over the last day or two I've seen the following blamed: Bad network drivers ... I've updated to the latest drivers with no result Symantec anti-virus ... we're not using it (currently no AV on the server) Receive window auto-tuning ... I've disabled with netsh int tcp set global autotuninglevel=disabled and netsh int tcp set global rss=disabled None of these have had an effect. Windows Firewall is currently disabled. As other Server 2008 boxes (both x32 and x64) can connect, I can only assume that there's some new security configuration that's not quite right - or there's an AD issue that I need to trace, but don't know where to start. Even if anyone doesn't know how to resolve, if someone knows what I need to look for with Wireshark this would be a help.

  Read the article

• Coldfusion:-Firefox can't establish a connection to the server at localhost

  - by Fransis

  I installed Coldfusion 8 trial version on my system (XP Professional sp3). I created an Folder in the “C:/Coldfusion8/wwwroot” called “buildProject” containing an Index.cfm and some other .cfm files. But I am unable to access the Neither my project files or CFIDE/Administrator I tried the following URLS http://localhost:8500/wwwroot/buildProject/ http://localhost:8500/CFIDE/administrator/index.cfm http:// 127.0.0.1:8500/wwwroot/buildProject/ http:// 127.0.0.1:8500/CFIDE/administrator/index.cfm http://localhost /wwwroot/buildProject/index.cfm http://localhost /CFIDE/administrator/index.cfm http://localhost /wwwroot/buildProject/ http://localhost /CFIDE/administrator/index.cfm Firefox can't establish a connection to the server at 127.0.0.1:8500. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. • I cleared the browsing “History” from both IE and FF. • I have restarted the CF server in the Control Panel Administrative Tools Services • Even restarted the IIS Getting the same error. Further I was trying to access IE/FF via CFbuilder But still I am getting the error “The connection was refused when attempting to contact [URL].” My inetpub is in the D rive where as CF8 is in C drive Also when i check IIS-5 Control Panel Admin tools Services I do not find the Localhost under web sites or FTP sites. Kindly help me with a fix.

  Read the article

• Windows Server 2012 licensing issue preventing RDP connections?

  - by QF_Developer

  I am witnessing an unusual behaviour on 1 of 5 Windows Server 2012 R2 machines (clean install) that is preventing any remote connections from being established via RDP. I have run through the prerequisites for RDP here but I am finding that any remote connection attempt instantly stops the "Windows Protection Service". When I check the event logs I see the following entry. The Software Protection Service has stopped Event ID: 903 Source: Security-SPP From what I have read Security-SPP is tasked with enforcing activation and licensing, it appears that RDP requires this service to be in the running state. Is it possible that I have inadvertently activated this instance of Windows with a key that has already been associated to another instance (We have 5 keys as part of an MSDN subscription)? Would this be sufficient to block RDP access? When I look under System Properties (Windows Activation) it states that Windows is activated and there are no other obvious indicators that there's a licensing issue. EDIT 1: I ran a Powershell script to display the product keys for all servers in order to check for any duplication. For the problematic server I am getting the message The RPC server is unavailable.

  Read the article

• How to diagnose issue between mobo, RAID, and SSD cache drive? [migrated]

  - by goober

  Background This issue is happening on my custom-built desktop. Relevant specs: Motherboard: ASUS P8Z68-V PRO Utilizing Intel RST technology (application that uses unused SSD as cache) Processor: Intel core i7-2600k (not overclocked) HDDs: RAID1 of 2x Seagate Barracuda 1TB (ST31000524AS) (RAID performed via z68 chipset) Machine has run fine for ~1 year with no issues, and has been well-maintained (dust, etc.) What Happened Random Freezing issues -- intermittent Looked at the RST application screen to see that the acceleration cache was listed as "unavailable" -- recommended that I power down and reconnect the drive. Reconnected the drive to no avail. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Now, the freeze happens whenever loading something particularly data-driven (a video, a game, etc.) Steps Attempted Reconnected the drive to no avail. Updated Intel RST software to v. 11.6.0.1030 to see if that made a difference. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Connected the drive as its own volume. Formatted it, ran disk check errors -- all seems fine. Reconnected the drive and selected it again as the cache drive. Now, what happens when there is a freeze: Machine freezes I am unable to perform any command Screen then goes black I hit the reset button During boot, all drives show as "Disabled" and I am told no volume can be found I then hit the reset button (or power off/on) again. Either the next time (or sometimes after repeating this once more), the metadata cache is reconstructed and the system boots fine, showing the SSD as a cache. Question I believe this is an issue with the SSD itself, but how can I be sure since connecting it separately appeared to show no problems? I want to make sure it's not an issue with the motherboard, SATA ports, etc.

  Read the article

• RESOLVED Why does IPtables's NAT stop working when I enable the firewall's third interface?

  - by Kronick

  On my firewall I've three interfaces : eth0 : public IP (46.X.X.X.) eth0:0 public IP (46.X.X.Y.) eth1 : public IP (88.X.X.X.) eth2 : private LAN (172.X.X.X) I've setup a basic NAT which works great until I turn on the eth1 interface, I basically loose the connectivity. When I turn off the interface (ifconfig eth1 down) then the NAT re-work. I've added some policy routing via iproute, which makes my three public IP's available. I don't understand why turning on eth1 on makes the LAN unavailable. PS : weirder ; when I turn on eth1 BUT remove the NAT, then the firewall is accessible by using the public IPS. So to me it's exclusively a NAT issue, since without the NAT the network works while with the NAT without the second public interface, the NAT does work. Regards EDIT : I've been able to make it work by using iproute2 rules. That was definitely a routing issue. Here is what I did : ip rule add prio 50 table main ip rule add prio 201 from ip1/netmask table 201 ip rule add prio 202 from ip2/netmask table 202 ip route add default via gateway1 dev interface1 src ip1 proto static table 201 ip route append prohibit default table 201 metric 1 proto static ip route add default via gateway2 dev interface2 src ip2 proto static table 202 ip route append prohibit default table 202 metric 1 proto static # mutipath ip rule add prio 221 table 221 ip route add default table 221 proto static \ nexthop via gateway1 dev interface1 weight 2\ nexthop via gateway2 dev interface2 weight 3

  Read the article

• Windows Server doesn't connect to a network share

  - by Dmitriy N. Laykom

  Windows Server doesn't connect to a network share. Network share is working. Blockquote Pinging 109.123.146.223 with 32 bytes of data: Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Ping statistics for 109.123.146.223: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms net view \shareaddress Blockquote System error 53 has occurred. The network path was not found. When I connected the network share I observed this error message: Blockquote \ "Mapped disk letter" refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location The network share was mounted via Group Policy. Perchance anyone knows how I can avoid this error? When the OS has been restored from the disk problem has been solved

  Read the article

• Using Truecrypt to secure mySQL database, any pitfalls?

  - by Saul

  The objective is to secure my database data from server theft, i.e. the server is at a business office location with normal premises lock and burglar alarm, but because the data is personal healthcare data I want to ensure that if the server was stolen the data would be unavailable as encrypted. I'm exploring installing mySQL on a mounted Truecrypt encrypted volume. It all works fine, and when I power off, or just cruelly pull the plug the encrypted drive disappears. This seems a load easier than encrypting data to the database, and I understand that if there is a security hole in the web app , or a user gets physical access to a plugged in server the data is compromised, but as a sanity check , is there any good reason not to do this? @James I'm thinking in a theft scenario, its not going to be powered down nicely and so is likely to crash any DB transactions running. But then if someone steals the server I'm going to need to rely on my off site backup anyway. @tomjedrz, its kind of all sensitive, individual personal and address details linked to medical referrals/records. Would be as bad in our field as losing credit card data, but means that almost everything in the database would need encryption... so figured better to run the whole DB in an encrypted partition. If encrypt data in the tables there's got to be a key somewhere on the server I'm presuming, which seems more of a risk if the box walks. At the moment the app is configured to drop a dump of data (weekly full and then deltas only hourly using rdiff) into a directory also on the Truecrypt disk. I have an off site box running WS_FTP Pro scheduled to connect by FTPs and synch down the backup, again into a Truecrypt mounted partition.

  Read the article

• How can I access user files on a disk moved from a Windows 7 machine to an XP machine?

  - by Fantius

  I moved the hard drive from one machine (Win 7) to another (XP) and now certain folders tell me "Access denied". I am logged in as an administrator. I had a different account on the other machine. Neither account authenticated to anything besides the local machine. The old machine is apparently dead, so I can't do anything in there like change permissions, etc. How can I access these files? Edit: After changing the ownerships of all the files and folders on the drive, I am getting a different error. And it is troubling me deeply. "xxx refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location." No change after rebooting. Any ideas? Surely the files are still there, right?

  Read the article

• Files showing in smbclient but not smbmount

  - by Staale

  I have a samba folder that I try and access through smbclient, and I can browse it just fine. However, mounting it through smbmount, all the folders under the share are empty. I can list the folders directly under the share fine, but they all appear empty. smbclient: # smbclient //server/share -U username -W workgroup password smbmount # sudo smbmount //server/share mntpoint -o user=username,workgroup=workgroup,password=password I have also tried with domain=workgroup instead of workgroup, both give the same result. No error messages, everything mounts fine, but all the folders under mntpoint are empty, despite the same folders being non-empty when using smbclient. Are these using different libraries? How can I debug the error? Additionally, if I try to mount //server/share/folder, doing an ls results in a segmentation fault. Using dmesg I find: kernel BUG at /build/buildd/linux-2.6.28/fs/cifs/cifs_dfs_ref.c:315! Full trace: http://pastebin.com/m70adc213 Using a credentials file, I first get empty dirs, then Resource temporarily unavailable. In my dmesg I see the following output: CIFS VFS: compose_mount_options: Failed to resolve server part of \\srv\share to IP: -11

  Read the article

• How do I setup a secondary incoming mail server?

  - by abrahamvegh

  I currently have a server running Debian 6, with postfix and dovecot handling email. This server hosts email for a number of domains and users, so I use MySQL as my backing store for users and forwardings and everything related. Currently, this server is the only server listed in an MX record for all of the domains it serves. I would like to create a secondary server that would be listed in the DNS with a lower priority (e.g. current primary server is priority 5, secondary would be priority 10), so that in the event that I need to reboot the primary server, or otherwise make it unavailable, the secondary server would receive email, and hold it until the primary server came back up, at which point it would deliver any held email to the primary server. I do not need the secondary server to function as a backup sending server. Users would never need to see the secondary server, they would simply not lose incoming emails if the primary server is down, and they would be unable to send or receive until the primary came back up. How would I go about doing this? I would like to use the same software if they can handle this task, because I’m already familiar with managing them.

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >